Preparation of ion exchange resin using soluble starch and acrylamide by graft polymerization and hydrolysis

Characteristics and Influence Factors of Pb(II) Adsorption by Graphene Oxide-Montmorillonite Composite

This study presents the fabrication of a novel porous composite of graphene oxide-montmorillonite (GO-MMT) through the modification of montmorillonite using the freeze-drying method for the purpose of Pb removal. The characterization of the GO-MMT composite was conducted using scanning electron microscopy, Fourier transform infrared spectrometry, and X-ray diffraction. The results from batch adsorption experiments revealed that the GO-MMT composite exhibited a superior capacity for Pb removal compared to MMT. Furthermore, a single factor experiment confirmed that the dosage of the GO-MMT composite or GO, pH, temperature, and reaction time all significantly influenced the adsorption of Pb by the GO-MMT composite, MMT, or GO. This superiority can be attributed to the presence of oxygen-containing functional groups, the site-blocking effect, and the ion exchange mechanism exhibited by the GO-MMT composite.

Facile preparation of UiO-66-Lys/PAN nanofiber membrane by electrospinning for the removal of Co(II) from simulated radioactive wastewater

In this study, metal-organic framework (MOF) nanofiber membranes (NFMs) UiO-66-Lys/PAN were prepared by electrospinning using polyacrylonitrile (PAN) as the matrix, UiO-66-NH2 as the filler, and lysine (Lys) as the functional monomer. The membranes were subsequently employed to extract cobalt ions from simulated radioactive wastewater. The findings showed that the best performance of the membrane was obtained with a 3 % MOF content (3%UiO-66-Lys/PAN). Specifically, the pure water flux (PWF) of the 3 % UiO-66-Lys/PAN membrane reached 872 L m-2 h-1 with a cobalt ion retention of 45.4 %. In addition, adsorption experiments indicated that the NFMs had a theoretical maximum adsorption capacity of 41.4 mg/g for cobalt ions. The Langmuir isotherm model and the pseudo-second-order kinetic model were observed in the adsorption process, suggesting that the membrane material showed uniform adsorption of cobalt ions on a monolayer level, with an endothermic absorption process. XPS analysis confirmed that 3%UiO-66-Lys/PAN facilitated the adsorption of cobalt ions through a coordination effect, with the N and O atoms serving as coordinating atoms. Moreover, the material displayed excellent radiation stability even when exposed to doses ranging from 20 to 200 kGy. This study validated the stability of the MOF NFMs under real irradiation with radioactive nuclides (60Co) and demonstrated efficient cobalt ion separation. This study has important practical implications for the treatment and disposal of small volumes of 60Co-containing radioactive wastewater for engineering applications.

Manganese-doped hydroxyapatite as an effective adsorbent for the removal of Pb(II) and Cd(II)

The water polluted by lead(Pb(II)) and cadmium(Cd(II)) seriously endangers ecological safety and needs to be solved urgently. Because of the relatively low adsorption rate of pure hydroxyapatite for heavy metals, a series of manganese-doped hydroxyapatites (MnHAPs) were prepared by using manganese, a common impurity in hydroxyapatite, as a doping element to improve the adsorption performance. The structural and functional groups of the materials with different Mn/(Ca +Mn) molar ratios (0%, 5%, 10%, 20%, and 30%) were investigated by scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET), X-Ray diffraction (XRD), Raman spectrometer and Fourier transform infrared spectroscopy (FTIR) characterization. The presence of manganese influenced the formation and growth of hydroxyapatite crystals, resulting in lattice distortion and a large number of lattice defects in materials. Among them, manganese-doped hydroxyapatite with a Mn/(Ca +Mn) molar ratio of 10% (MnHAP-10) could most effectively remove Pb(II) and Cd(II), with the adsorption capacity of 1806.09 mg g^-1 for Pb(II) at pH = 5 and 176.88 mg g^-1 for Cd(II) at pH = 5.5. Then the adsorption behavior and mechanism were further researched systemically. It was concluded that the immobilization of Pb(II) by MnHAP-10 was mainly through dissolution precipitation and ion exchange, while Cd(II) was adsorbed by ion exchange and electrostatic interaction. In conclusion, MnHAP-10 has the potential to be applied as an effective adsorbent for the removal of Pb(II) and Cd(II) pollution.

Development of nitric acid-modified activated carbon electrode for removal of Co2+/Mn2+/Ni2+ by electrosorption

In this paper, nitric acid-modified activated carbon was used as an electrode in the electrosorption process for the removal of Co²⁺, Mn²⁺, and Ni²⁺ from wastewater. The effects of applied voltage, initial pH, and coexisting ions on removal efficiency were investigated. The adsorption process was evaluated by adsorption isotherm models. The results indicated that the electrosorption process was consistent with the Langmuir model, proving that the electrosorption process was a monolayer adsorption process. The maximum adsorption capacities of Co²⁺, Mn²⁺, and Ni²⁺ were 131.58 mg/g, 102.04 mg/g, and 103.09 mg/g. Electrochemical tests revealed that the specific capacitance of AC-HNO₃ was 54.11 F/g when the scanning rate was 5 mV/s, while the specific capacitance of AC was 36.51 F/g. The Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) confirmed that the content of oxygen groups on the surface of activated carbon increased after modification, which provided more adsorption sites for electrosorption. When the selected concentration of HCl was used as the eluent, the elution efficiency of Co²⁺, Mn²⁺, and Ni²⁺ could reach 94.23%, 93.65%, and 90.61%. The removal efficiency could reach more than 95% after three cycles. The results of the study can be used as a reference significance for the removal of cobalt, manganese, and nickel ions from heavy metal wastewater by electrosorption.

Preparation of the Carbonized Zif−8@PAN Nanofiber Membrane for Cadmium Ion Adsorption

The zeolitic imidazolate framework (ZIF−8)@polyacrylonitrile (PAN) nanofiber membrane was prepared and carbonized for heavy metal cadmium ion (Cd²⁺) adsorption in aqueous medium. Zinc oxide (ZnO) was first sputtered onto the surface of the PAN electrospun nanofiber membrane to provide a metal ion source. Then, the ZIF−8@PAN nanofiber membrane was prepared via in situ solvothermal reaction and carbonized in a tube furnace at 900 °C under a N₂ atmosphere to enhance adsorption performance. The synthesized ZIF−8 particles with polyhedral structure were uniformly immobilized on the surface of the PAN electrospun nanofiber membrane. After being heated at 900 °C, the polygonal ZIF−8 shrank, and the carbonized ZIF−8@PAN nanofiber membrane was obtained. Compared with the nanofiber membrane without being carbonized, the adsorption capacity of the carbonized ZIF−8@PAN nanofiber membrane reached 102 mg L⁻¹, and its Cd²⁺ adsorption efficiency could be more than 90% under the adsorption temperature of 35 °C and solution of pH = 7.5 conditions. According to the adsorption thermodynamics analysis, the Cd²⁺ adsorption process of the carbonized ZIF−8@PAN nanofiber membrane was spontaneous. The whole Cd²⁺ adsorption process was more suitably described by the pseudo second-order adsorption kinetics model, indicating that there exists a chemical adsorption mechanism besides physical adsorption.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Single evaluation and selection of functional groups containing N or O atoms to heavy metal adsorption: Law of electric neutrality

Adsorption capacities and characteristics of heavy metal adsorbents have been investigated thoroughly, but the essential functional groups to bind heavy metal pollutants in composites have not been identified and confirmed separately. Previous researches reported that -OH, -NH₂, -CONH₂ or their protonation had binding effects to heavy metals. However, these descriptions were all based on the complex composites. The composites were consisted of different functional groups. Thus, this article aims to evaluate and discuss (1) the adsorption properties of different functional groups containing N or O atoms, (2) the protonation of groups containing N atoms, (3) the basis properties of adsorbents related to adsorption, (4) the physical adsorption by network structure. By a series of single evaluations, the results showed that the hydrophobic ester group (R₁-COO-R₂), non-ionic groups, including -OH, -NH₂, -CONH₂, ether (C-O-C), CO, tertiary amine (R3N), and protonation of -NH₂ and R3N, had no interaction with metals. Only negative groups, such as -COO^-, -SO₃^-, could adsorb cationic heavy metals. And positive -N(CH₃)₃⁺ group could bind with Cr₂O₇^2-. Furthermore, these conclusions have been verified by the law of electric neutrality in the heavy metal solutions and solid adsorbents. This study determined that the combining process between negative functional groups and cationic metals, or between positive groups and anionic metals, can be applied to decrease the heavy metal concentration.

Adsorption properties of β-cyclodextrin modified hydrogel for methylene blue

With the development of dye and printing, production wastewater has become one of the most primary pollution sources of water and soil pollution. Most of the dyes are toxic substances, which have the "three-way" effect of carcinogenic, teratogenic and mutagenic. Therefore, it is a very difficult but significant issue to deal with the dye in the wastewater. Here, we report a study on low-cost, high-capacity hydrogels that remove water-soluble dyes. The hydrogel is prepared by crosslinking the β-cyclodextrin and functional monomer: acrylamido and 2-acrylamide-2-methylpropane sulfonic acid by aqueous solution polymerization, meanwhile, alkaline hydrolysis is also an important step for adsorption performance. After alkaline hydrolysis, the amide and sulfonic groups in the hydrogel were converted into carboxylate and sulfonate, which was beneficial to the adsorption of cationic dyes. This polymer could remove 96.58% methylene blue (400 mg/L) and only requires 0.02 wt%. Its maximum adsorption capacity for methylene blue could reach 2638.22 mg/g under equilibrium condition. It is the most powerful adsorbent used to treat dye wastewater, according to the report. It also provides some references for hydrogel treatment of dye wastewater.

High crosslinked sodium carboxyl methylstarch-g-poly (acrylic acid-co-acrylamide) resin for heavy metal adsorption: its characteristics and mechanisms

A lower expansive heavy metal adsorbent, high crosslinked sodium carboxyl methylstarch-g-poly (acrylic acid-co-acrylamide) resin (HCAA), has been prepared by enhancing the crosslinking degree of the traditional water-absorbing polymer under the graft copolymerization reaction. Further heavy metal adsorption experiments, morphology analysis, and structure characteristic observations indicate that HCAA resin has an excellent heavy metal adsorption properties for Cr³⁺, Cu²⁺, Ni²⁺, and Zn²⁺ of 80.08, 158.07, 155.71, and 137.15 mg/g, respectively. The nanoholes in network structures of HCAA resin expanding in solution provide an effective diffusion and exchange channels for heavy metal ions and Na⁺. The adsorption process of HCAA containing -COONa is attributed to ion exchange process, and its essence is to form the coordination bond with heavy metals. The adsorption capacity differences of -COO^- have been explained by using the coordination chemistry theory. In addition, the adsorption selectivity of an expansive adsorbent containing -COONa are heavy metals > H₂O >> Na⁺. Our research puts forward an insight that increasing the crosslinker content on the basis of the traditional super absorbent resin can obtain a lower expansive adsorbent to heavy metal pollutants.