Safety evaluation and ibuprofen removal via an Alternanthera philoxeroides-based biochar

A review on exploring pyrolysis potential of invasive aquatic plants

The rapid spread of invasive aquatic plants poses significant ecological and economic challenges, necessitating effective management strategies. Pyrolysis, a thermochemical decomposition process in an oxygen-free environment, offers a promising solution for converting these plant-based biomass sources into biochar. Biochar, produced through the pyrolysis of organic materials in low-oxygen environments, has high carbon content, excellent resistance to degradation, and high aromaticity, making it a valuable resource for various industries, including agriculture, environment, and energy sectors and supports the circular economy. Invasive aquatic plants are widely distributed and are ideal resources for biochar production. Pyrolysis of invasive aquatic plants offers multiple benefits, including protecting ecosystems from aggressive species, promoting human health, mitigating aquatic weed proliferation, and generating other renewable energy resources. Invasive plant-derived biochar has emerged as a novel material, distinguished from traditional biochar by its unique structure and composition. This study explores the pyrolysis potential of various invasive aquatic plants by examining biochar's origins, analysing how pyrolysis conditions affect the conversion of these invasive aquatic plants, and exploring characterization methods, applications, and future potential of biochar derived from these plants. An economic analysis of biochar pyrolyzed from invasive aquatic plants is also reviewed and reported.

Enhanced copper removal by magnesium modified biochar derived from Alternanthera philoxeroides

Adsorption processes are being widely used by various researchers for the removal of heavy metals from waste streams and biochar has been frequently used as an adsorbent. In this study, a MgO-loaded biochar derived from Alternanthera philoxeroides (MAPB) was synthesized for the removal of Cu(II). Compared with other biochar absorbents, MAPB showed a relatively slow adsorption kinetics, but an effective removal of Cu(II) with a maximum sorption capacity of 1, 238 mg/g. The adsorption mechanism of Cu(II) by MAPB was mainly controlled by chemical precipitation as Cu2(OH)3NO3, complexation and ion replacement. Fixed bed column with MAPB packed in same dosage (1, 000 mg) and different bed depth (1.3, 2.6 and 3.9 cm) showed that the increased of bed depth by mixing MAPB with quartz sand could increase the removal of Cu(II). The fitted breakthrough (BT) models showed that mixing MAPB with support media could reduce the mass transfer rate, increase the dynamic adsorption capacity and BT time. Therefore, MAPB adsorbent act as a highly efficient long-term adsorbent for Cu(II) contaminated water treatment may have great ecological and environmental significance.

Geopolymer-Based Materials for the Removal of Ibuprofen: A Preliminary Study

Every year, new compounds contained in consumer products, such as detergents, paints, products for personal hygiene, and drugs for human and veterinary use, are identified in wastewater and are added to the list of molecules that need monitoring. These compounds are indicated with the term emerging contaminants (or Contaminants of Emerging Concern, CECs) since they are potentially dangerous for the environment and human health. To date, among the most widely used methodologies for the removal of CECs from the aquatic environment, adsorption processes play a role of primary importance, as they have proven to be characterized by high removal efficiency, low operating and management costs, and an absence of undesirable by-products. In this paper, the adsorption of ibuprofen (IBU), a nonsteroidal anti-inflammatory drug widely used for treating inflammation or pain, was performed for the first time using two different types of geopolymer-based materials, i.e., a metakaolin-based (GMK) and an organic-inorganic hybrid (GMK-S) geopolymer. The proposed adsorbing matrices are characterized by a low environmental footprint and have been easily obtained as powders or as highly porous filters by direct foaming operated directly into the adsorption column. Preliminary results demonstrated that these materials can be effectively used for the removal of ibuprofen from contaminated water (showing a concentration decrease of IBU up to about 29% in batch, while an IBU removal percentage of about 90% has been reached in continuous), thus suggesting their potential practical application.

Adsorption of the non-steroidal anti-inflammatory drug (ibuprofen) onto biochar and magnetic biochar prepared from chrysanthemum waste of the beverage industry

Biochar and magnetic biochar prepared from chrysanthemum waste of the beverage industry are effective adsorbents for the removal of the non-steroidal anti-inflammatory drug, ibuprofen (IBP), from aqueous systems. The development of magnetic biochar using iron chloride, overcame poor separation characteristics from the liquid phase of the powdered biochar after adsorption. Characterisation of biochars was achieved through Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), N₂ adsorption/desorption porosimetry, scanning electron microscopy (SEM), electron dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), moisture and ash content, bulk density, pH and zero-point charge (pH_pzc). The specific surface area of non-magnetic and magnetic biochars was 220 and 194 m² g^-1, respectively. Adsorption of ibuprofen was optimised with respect to contact time (5-180 min), solution pH (2-12) and initial drug concentration (5-100 mg L^-1), with equilibrium being reached in 1 hour, and the maximum ibuprofen removal occurred at pH 2 and 4 for biochar and magnetic biochars, respectively. Investigation of the adsorption kinetics was achieved through application of the pseudo-first order, pseudo-second order, Elovich and intra-particle diffusion models. Adsorption equilibrium was evaluated using Langmuir, Freundlich and Langmuir-Freundlich isotherm models. The adsorption kinetics and isotherms for both biochars are well described by pseudo-second order kinetic and Langmuir-Freundlich isotherm models, respectively, with the maximum adsorption capacity of biochar and magnetic biochar being 167 and 140 mg g^-1, respectively. Chrysanthemum derived non-magnetic and magnetic biochars exhibited significant potential as sustainable adsorbents toward the removal of emerging pharmaceutical pollutants such as ibuprofen from aqueous solution.

Insight into the adsorptive removal of ibuprofen using porous carbonaceous materials: A review

Over the last decade, the removal of pharmaceuticals from aquatic bodies has garnered substantial attention from the scientific community. Ibuprofen (IBP), a non-steroidal anti-inflammatory drug, is released into the environment in pharmaceutical waste as well as medical, hospital, and household effluents. Adsorption technology is a highly efficient approach to reduce the IBP in the aquatic environment, particularly at low IBP concentrations. Due to the exceptional surface properties of carbonaceous materials, they are considered ideal adsorbents for the IBP removal of, with high binding capacity. Given the importance of the topic, the adsorptive removal of IBP from effluent using various carbonaceous adsorbents, including activated carbon, biochar, graphene-based materials, and carbon nanostructures, has been compiled and critically reviewed. Furthermore, the adsorption behavior, binding mechanisms, the most effective parameters, thermodynamics, and regeneration methods as well as the cost analysis were comprehensively reviewed for modified and unmodified carbonaceous adsorbents. The compiled studies on the IBP adsorption shows that the IBP uptake of some carbon-based adsorbents is significantly than that of commercial activated carbons. In the future, much attention is needed for practical utilization and upscaling of the research findings to aid the management and sustainability of water resource.

Chemical speciation determines combined cytotoxicity: Examples of biochar and arsenic/chromium

As both electron donors and acceptors, biochars (BCs) may interact with multivalent metal ions in the environment, causing changes in ionic valence states and resulting in unknown combined toxicity. Therefore, we systematically investigated the interaction between BCs and Cr (Cr(III) & Cr(VI)) or As (As(III) & As(V)) and their combined cytotoxicity in human colorectal mucosal (FHC) cells. Our results suggest that the redox-induced valence state change is a critical factor in the combined cytotoxicity of BCs with Cr/As. Specifically, when Cr(VI) was adsorbed on BCs, 86.4 % of Cr(VI) was reduced to Cr(III). In contrast, As(III) was partially oxidized to As(V) with a ratio of 37.2 %, thus reaching a reaction equilibrium. Meanwhile, only As(V) was released in the cell, which could cause more As(III) to be oxidized. As both Cr(III) and As(V) are less toxic than their corresponding counterparts Cr(VI) and As(III), different redox interactions between BCs and Cr/As and release profiles between BCs and Cr/As together lead to reduced combined cytotoxicity of BP-BC-Cr(VI) and BP-BC-As(III). It suggests that the valence state changes of metal ions due to redox effects is one of the parameters to be focused on when studying the combined toxicity of complexes of BCs with different heavy metal ions.

Effects of particle size on the adsorption behavior and antifouling performance of magnetic resins

Adequately choosing the physicochemical characteristics of adsorbent is crucial in improving its adsorption performance. This work investigated the effect of particle size of magnetic resins on adsorption behaviors of tetracycline (TC) and their antifouling performance. Smaller particle size resin Q150 (10-30 μm) shows notably faster TC adsorption kinetics when compared resins with hundreds of microns (Q100 and Q1). Simulated by Weber-Morris equation, the film diffusion time of Q150 was only 20 min, 2-25 times faster than that of other resins. At this adsorption time, Q150 can reach more than 80% of the maximum adsorption, and the ring-like fluorescence images indicate that the molecules are accumulated on the external surface. Q150 also shows better reusability and antifouling performance over Q100 and Q1. After 20 adsorption-desorption cycles, the adsorption capacity of Q150 at 20 min only decreases 9.7%. The presence of tannic acid also only slightly decreases the adsorption capacity. The faster adsorption kinetics and the superior antifouling performance of Q150 make it a promising adsorbent in future use.

Amine-functionalized magnetic biochars derived from invasive plants Alternanthera philoxeroides for enhanced efficient removal of Cr(VI): performance, kinetics and mechanism studies

In this study, novel magnetic biochars derived from Alternanthera philoxeroides and modified by different amines (hexanediamine, melamine, and L-glutathione) were successfully prepared by hydrothermal carbonization and employed as an efficient adsorbent for Cr(VI). When pH = 2.0, T = 25 °C, c₀ = 100 mg/L, and the dosage of biochars is 0.05 g, the maximum adsorption capacity of Cr(VI) by pristine biochar (BAP) was 42.47 mg/g and modified biochars (MFBAP, MEBAP, LBAP) was 80.58, 62.26, and 55.66 mg/g, respectively. It was found that hexanediamine and melamine could enhance the S_BET of biochars, while L-glutathione could reduce its S_BET, which could be supported by BET measurement and SEM images. Adsorption kinetics and isotherm studies showed that the Cr(VI) adsorption process of MFBAP followed Elovich kinetic model and Langmuir isotherm, respectively, which means that it was mainly a chemical adsorption process. The characterization results proved that -NH₂ derived from amines plays a significant role in removing Cr(VI), which is mainly degraded by complexation reaction, electrostatic interaction, and reduction. In sum, the biochar modified by amines has excellent Cr(VI) adsorption performance, highly enhanced S_BET, and excellent recyclability, which is a promising candidate for solving the problem of invasive plants and wastewater treatment.

Easy and Low-Cost Method for Synthesis of Carbon–Silica Composite from Vinasse and Study of Ibuprofen Removal

Vinasse was successfully utilized to synthesize carbon–silica composite with a low-cost silica source available in Thailand (sodium silicate, Na2SiO3) and most commonly used source, tetraethyl orthosilicate (TEOS). The composites were prepared by a simple one-step sol–gel process by varying the vinasse (as carbon source) to silica source (Na2SiO3 or TEOS) weight ratio. The resulting composites were characterized by N2 adsorption, moisture and ash contents, pH, pHpzc, bulk density, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX). The composites had highest surface area of 313 and 456 m2/g, with average mesopore diameters of 5.00 and 2.62 nm when using Na2SiO3 and TEOS as the silica sources, respectively. The adsorption of a non-steroidal anti-inflammatory drug, ibuprofen, was investigated. The contact time to reach equilibrium was 60 min for both composites. The adsorption kinetics were fitted by a pseudo-second-order model with the correlation coefficient R2 > 0.997. The adsorption isotherms were well described by the Langmuir model (R2 > 0.992), which indicates monolayer adsorption. The maximal adsorption capacities of the Na2SiO3- and TEOS-based composites were as high as 406 and 418 mg/g at pH 2, respectively. The research results indicate that vinasse and a low-cost silica source (Na2SiO3) show great potential to synthesize adsorbents through a simple method with high efficiency.

Overview of the use of biochar from main cereals to stimulate plant growth

The total global food demand is expected to increase up to 50% between 2010 and 2050; hence, there is a clear need to increase plant productivity with little or no damage to the environment. In this respect, biochar is a carbon-rich material derived from the pyrolysis of organic matter at high temperatures with a limited oxygen supply, with different physicochemical characteristics that depend on the feedstock and pyrolysis conditions. When used as a soil amendment, it has shown many positive environmental effects such as carbon sequestration, reduction of greenhouse gas emissions, and soil improvement. Biochar application has also shown huge benefits when applied to agri-systems, among them, the improvement of plant growth either in optimal conditions or under abiotic or biotic stress. Several mechanisms, such as enhancing the soil microbial diversity and thus increasing soil nutrient-cycling functions, improving soil physicochemical properties, stimulating the microbial colonization, or increasing soil P, K, or N content, have been described to exert these positive effects on plant growth, either alone or in combination with other resources. In addition, it can also improve the plant antioxidant defenses, an evident advantage for plant growth under stress conditions. Although agricultural residues are generated from a wide variety of crops, cereals account for more than half of the world's harvested area. Yet, in this review, we will focus on biochar obtained from residues of the most common and relevant cereal crops in terms of global production (rice, wheat, maize, and barley) and in their use as recycled residues to stimulate plant growth. The harvesting and processing of these crops generate a vast number and variety of residues that could be locally recycled into valuable products such as biochar, reducing the waste management problem and accomplishing the circular economy premise. However, very scarce literature focused on the use of biochar from a crop to improve its own growth is available. Herein, we present an overview of the literature focused on this topic, compiling most of the studies and discussing the urgent need to deepen into the molecular mechanisms and pathways involved in the beneficial effects of biochar on plant productivity.

Effect of Acid–Base Modified Biochar on Chlortetracycline Adsorption by Purple Soil

We used three purple soil (Hechuan, Jialing, and Cangxi) samples from the Jialing River basin as the research objects and added different proportions of an acid–base modified Alternanthera philoxeroides biochar (Cm) to the purple soil to study the effect of Cm on the adsorption of chlortetracycline (CTC) in the purple soil. The results indicated the following: (1) At 30 °C and pH = 6, the soil adsorption capacity increased with an increasing initial concentration of CTC. The maximum adsorption amount of CTC for each tested sample was in the range of 2054.63–3631.21 mg/kg, and the adsorption capacity in different Cm amended soils was ranked in the order of 10% Cm > 5% Cm > 2% Cm > CK. The adsorption capacity of CTC increased with an increase in the proportion of Cm. Furthermore, under the same addition ratio of Cm, Hechuan soil was found to have a better adsorption effect for CTC than Jialing and Cangxi soil. (2) The Langmuir model was the most suitable for fitting the adsorption behavior of CTC on different purple soils, and the fitting coefficients were all greater than 0.9, indicating that the adsorption of CTC on each soil sample occurred via monolayer adsorption. The thermodynamic experiment results showed that an increase in temperature was beneficial to the process of CTC adsorption, which was a spontaneous, endothermic, and entropy-adding process. (3) At pH = 6, the ionic strength ranged from 0.01 to 0.5 mol/L and the adsorption capacity of CTC of the soil samples decreased with an increase in ionic strength. In the range of pH 2–10, the adsorption capacity of CTC in all the soil samples decreased with an increase in pH. The inhibition capacity of CTC in the soil samples under acidic conditions was notably higher than that under alkaline conditions.

Development of a novel and efficient biochar produced from pepper stem for effective ibuprofen removal

A potential biochar from pepper stems (PS-biochar) was developed via a one-stage pyrolysis process of precursor at 700 °C and employed to adsorb ibuprofen (IBP) in water media. Results showed that PS-biochar was a carbonaceous mesoporous adsorbent with well-developed porosity (S_BET = 727.5 m²/g and V_Total = 0.36 cm³/g) and rich surface functional groups. Mechanism of IBP adsorption consisted mainly of π- π interaction, pore filling, and H-bonding. The Langmuir monolayer capacity (569.6 mg/g) was very high compared to values reported in similar studies. The successful PS-biochar regeneration after four cycles in the batch system confirmed the high performance of the NaOH (0.1 M) as a desorbing agent. Therefore, the prepared biochar can be considered as a cost-effective and high-performance material for water decontamination.