Carbon dots prepared for fluorescence and chemiluminescence sensing

Surface-Defect-Involved Chemiluminescence Boosted by Gold-Silver Bimetallic Nanoclusters for Bioanalysis

Chemiluminescence (CL) as a powerful analytical tool has garnered increasing interest. However, traditional molecular-based CL luminophores suffer from low emission efficiency due to limited total CL photons emitted per luminophore, driving efforts to explore amplified strategies or novel probes to boost the emission. Although metal nanoclusters (NCs) as luminescent nanoprobes have been extensively studied for electrochemiluminescence and photoluminescence (PL) owing to their intriguing luminescent properties, the CL performance using metal NCs as emitters is often ignored. Herein, based on the synergistic effect within the bimetallic NCs, a series of glutathione-coated Au-Ag bimetallic NCs (GSH-AuAg NCs) were optimized by adjusting precursor ratios and achieved the maximum CL response at a Au:Ag molar ratio of 5:1. To our surprise, CL emission with GSH-AuAg NCs as emitters was triggered with oxidant reagents such as KMnO4, and bimetallic NCs display boosted CL emission (ca. 6.2-fold) compared to monometallic NCs owing to the synergistic effect on enhancing the emission efficiency. Surface-defect-involved CL was revealed by collecting the CL spectra with a maximum emission wavelength of around 750 nm and an obvious red shift of 140 nm compared to PL spectra. The mechanism reveals the KMnO4-injected hole into the valence band through redox reactions with GSH ligands, leading to CL emission by efficient radiative charge recombination with pre-existing electron. A sensing platform based on the GSH-AuAg NCs/oxidant system was constructed for sensing H2O2 and glucose, demonstrating the potential of GSH-AuAg NCs as CL emitters in analytical applications.

Hydrothermal synthesis of modified lignin-based carbon dots derived from biomass waste for fluorescence determination of valsartan

Recently, carbon dots (CDs) have been extensively investigated as potential tools for numerous applications. Modified lignin-based CDs have been synthesized and used in the field of drug detection. They were found to be highly selective and sensitive to valsartan (VAL). Using a simple hydrothermal method, phosphorus and chlorine co-doped CDs were synthesized using lignin extracted from date seeds. The fluorescence properties of the synthesized CDs are influenced by several factors, which were investigated in detail. The optimal synthesis conditions were 1.50 g of lignin, 18 mL of 2 M NaOH, 1 mM H3PO4, 3 mM HCl and the mixture was heated at 220 °C for 16 hours. The synthesized lignin-based CDs have excellent FL properties and are well soluble in water with reasonable stability. Characterization of the prepared CDs revealed that they have various functional groups with a graphene oxide-like structure. The developed CDs show a good quantum yield of 37.7%. The FL of the CDs is quenched by VAL at λ em 313 nm after λ ex at 275 nm by a combination of static and dynamic quenching mechanisms. The response of VAL was linear in the range of 4.0-100.0 μg mL-1. The detection and quantification limits of VAL were 1.23 and 3.71 μg mL-1, respectively. The nanoprobe was successfully used to analyze VAL in drug samples and provided satisfactory results.

Silicon-Doped Carbon Dots Crosslinked Carboxymethyl Cellulose Gel: Detection and Adsorption of Fe3

The excessive emission of iron will pollute the environment and harm human health, so the fluorescence detection and adsorption of Fe3+ are of great significance. In the field of water treatment, cellulose-based gels have attracted wide attention due to their excellent properties and environmental friendliness. If carbon dots are used as a crosslinking agent to form a gel with cellulose, it can not only improve mechanical properties but also show good biocompatibility, reactivity, and fluorescence properties. In this study, silicon-doped carbon dots/carboxymethyl cellulose gel (DCG) was successfully prepared by chemically crosslinking biomass-derived silicon-doped carbon dots with carboxymethyl cellulose. The abundant crosslinking points endow the gel with excellent mechanical properties, with a compressive strength reaching 294 kPa. In the experiment on adsorbing Fe3+, the theoretical adsorption capacity reached 125.30 mg/g. The introduction of silicon-doped carbon dots confers the gel with excellent fluorescence properties and a good selective response to Fe3+. It exhibits a good linear relationship within the concentration range of 0-100 mg/L, with a detection limit of 0.6595 mg/L. DCG appears to be a good application prospect in the adsorption and detection of Fe3+.

Characterization of PDGF-Induced Subcellular Calcium Regulation through Calcium Channels in Airway Smooth Muscle Cells by FRET Biosensors

The homeostasis of cellular calcium is fundamental for many physiological processes, while the calcium levels remain inhomogeneous within cells. During the onset of asthma, epithelial and inflammatory cells secrete platelet-derived growth factor (PDGF), inducing the proliferation and migration of airway smooth muscle (ASM) to the epidermal layer, narrowing the airway. The regulation of ASM cells by PDGF is closely related to the conduction of calcium signals. In this work, we generated subcellular-targeted FRET biosensors to investigate calcium regulation in the different compartments of ASM cells. A PDGF-induced cytoplasmic calcium [Ca2+]C increase was attributed to both extracellular calcium influx and endoplasmic reticulum (ER) calcium [Ca2+]ER release, which was partially regulated by the PLC-IP3R pathway. Interestingly, the removal of the extracellular calcium influx led to inhibited ER calcium release, likely through inhibitory effects on the calcium-dependent activation of the ER ryanodine receptor. The inhibition of the L-type calcium channel on the plasma membrane or the SERCA pump on the ER resulted in both reduced [Ca2+]C and [Ca2+]ER from PDGF stimulation, while IP3R channel inhibition led to reduced [Ca2+]C only. The inhibited SERCA pump caused an immediate [Ca2+]C increase and [Ca2+]ER decrease, indicating active calcium exchange between the cytosol and ER storage in resting cells. PDGF-induced calcium at the outer mitochondrial membrane sub-region showed a similar regulatory response to cytosolic calcium, not influenced by the inhibition of the mitochondrial calcium uniporter channel. Therefore, our work identifies calcium flow pathways among the extracellular medium, cell cytosol, and ER via regulatory calcium channels. Specifically, extracellular calcium flow has an essential function in fully activating ER calcium release.

MicroRNA biosensors in lung cancer

Lung cancer has been one of the leading causes of death over the past century. Unfortunately, the reliance on conventional methods to diagnose the phenotypic properties of tumors hinders early-stage cancer diagnosis. However, recent advancements in identifying disease-specific nucleotide biomarkers, particularly microRNAs, have brought us closer to early-stage detection. The roles of miR-155, miR-197, and miR-182 have been established in stage I lung cancer. Recent progress in synthesizing nanomaterials with higher conductivity has enhanced the diagnostic sensitivity of electrochemical biosensors, which can detect low concentrations of targeted biomarkers. Therefore, this review article focuses on exploring electrochemical biosensors based on microRNA in lung cancer.

A ratiometric sensor based on dual-emission carbon dots sensitive detection of amaranth

Amaranth (AMA), a common food additive, is important to strictly control the content of food for the human body. In this paper, an innovative method based on intrinsic dual-emissive carbon dots (Y/B-CDs) was used to detect AMA. Y/B-CDs have two emission wavelengths at 416 and 544 nm with the excitation wavelength at 362 nm. The addition of AMA can rapidly quench the fluorescence of the two peaks with different degrees, and ratiometric detection can be achieved. Quantitative analysis showed two linear ranges of 0.1-20 μM and 20-80 μM, and detection limits are 42 and 33 nM, respectively. Moreover, good results were obtained for the detection of AMA in beverages and candy using Y/B-CDs. This suggests that the constructed sensor has the potential to detect AMA in real samples.

Dual-Exciting Central Carbon Nanoclusters for the Dual-Channel Detection of Hemin

Constructing optical nanoprobes with superior performance is highly desirable for sensitive and accurate assays. Herein, we develop a facile room-temperature strategy for the fabrication of green emissive carbon nanoclusters (CNCs) with dual-exciting centers for the dual-channel sensing of hemin. The formation of the CNCs is attributed to the crosslinking polymerization of the precursors driven by the Schiff base reaction between ethylenediamine and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone. Most importantly, the proposed CNCs have a unique excitation-independent green emission (518 nm) with two excitation centers at 260 nm (channel 1) and 410 nm (channel 2). The dual-exciting central emission can serve as dual-channel fluorescence (FL) signals for highly sensitive and reliable detection of hemin based on the inner filter effect. Because of the great spectral overlap difference between the absorption spectrum of hemin and the excitation lights of the CNCs in the two channels, hemin has a different quenching effect on FL emission from different channels. The dual-channel signals of the CNCs can detect hemin in the range of 0.075–10 μM (channel 1) and 0.25–10 μM (channel 2), respectively. These findings not only offer new guidance for the facile synthesis of dual-exciting central CNCs but also establish a reliable sensing platform for the analysis of hemin in complex matrixes.

Carbon Dot-Based Hydrogels: Preparations, Properties, and Applications

Hydrogels have extremely high moisture content, which makes it very soft and excellently biocompatible. They have become an important soft material and have a wide range of applications in various fields such as biomedicine, bionic smart material, and electrochemistry. Carbon dot (CD)-based hydrogels are based on carbon dots (CDs) and auxiliary substances, forming a gel material with comprehensive properties of individual components. CDs embedding in hydrogels could not only solve their aggregation-caused quenching (ACQ) effect, but also manipulate the properties of hydrogels and even bring some novel properties, achieving a win-win situation. In this review, the preparation methods, formation mechanism, and properties of CD-based hydrogels, and their applications in biomedicine, sensing, adsorption, energy storage, and catalysis -are summarized. Finally, a brief discussion on future research directions of CD-based hydrogels will be given.

Carbon dots with hydrogen bond-controlled aggregation behavior

Here, hydrophilic carbon dots (H-CDs) are prepared by a facile room temperature method. The strength of hydrogen bonds can be controlled by introducing proton and aprotic solvents, respectively, so as to realize the tunable aggregation state of H-CDs. Because of the ultrasensitive response to dimethyl sulfoxide (DMSO), H-CDs can serve as optical probes for detecting DMSO in a linear range of 0.005% to 0.75% and with a detection limit of 0.001%.

Multiple fluorescence response behaviours to proteins/bacteria and selective antibacterial activity of cetylpyridinium chloride (CPC)-based cationic carbon dots

Direct interaction between carbon dots (CDs) and biomolecules leads to changes in the chemical and physical status as well as properties of CDs, which can have various biological and biomedical applications. In this work, the surface of CDs was modified with cetylpyridinium chloride (CPC) to facilitate interactions between CDs and biomolecules. Multiple fluorescence response behaviours of CPC-based CDs were observed towards several proteins (bovine serum albumin, lysozyme, protamine, and hemoglobin) and bacterial cells (Escherichia coli and Staphylococcus aureus). Electrostatic attraction and hydrogen bonding were involved in inducing aggregation of CDs and fluorence enhancement. An inner filter effect might also occur to reduce fluorescence of CDs when interacting with proteins. Selective antibacterial activity of CPC-based CDs was observed towards Gram positive bacterium Staphylococcus aureus. This work provides potential to develop CD-based techniques for detecting and visualizing proteins/bacteria as well as selective antibacterial agents towards Gram-positive bacteria.

Reversible polymerization of carbon dots based on dynamic covalent imine bond

Carbon dots (CDs), as new type of carbon-based nanoparticles, are considered to be an aggregate with irreversible polymerization. Achieving the reversible tunability of CDs luminescence based on their reversible polymerization is a challenging subject. Herein, we, for the first time, design and construct the blue-emitting CDs with reversible polymerization by a room-temperature Schiff base reaction between tannic acid and ethylenediamine. The formation of CDs is proven to be due to the crosslinking polymerization of precursors caused by imine bond. As a dynamic covalent bond, imine bond endows CDs with controllable structural transformation properties, and the prepared CDs can be depolymerized and polymerized reversibly by pH-controlled imine bond cleavage and re-formation. These properties of reversible fluorescence photoswitching make the CDs have a good application prospect in reversible information encryption.

Carbon dots induced in-situ formation of porous europium micro-networks with enhanced photocatalysis

Excellent photocatalysts are highly desirable for clean energy and pollutant treatment. Carbon dots (CDs)-based composite photocatalysts have been widely studied and utilized in catalytic fields. However, the preparation of the photocatalysts with high catalytic activity still faces a great challenge. Herein, white-light-driven CDs-based porous europium micro-networks (CDs@P-Eu-MNs) composite photocatalysts are prepared by a facile in-situ growth strategy. CDs can affect the morphology and produce a large number of porous structures of CDs@P-Eu-MNs. Importantly, the introduction of CDs not only increases the light absorption, but also promotes the separation of photogenerated charge carriers, and thus improve photocatalytic performance of CDs@P-Eu-MNs composites. CDs@P-Eu-MNs show the highest photocurrent density, which can be used for the highly-efficient photodegradation of rhodamine 6G dyes with almost 95% degradation rate under low power white light (20 W) without any radical generating agents such as H₂O₂. Therefore, this new and efficient CDs@P-Eu-MNs photocatalyst will have a great application prospect in water pollution treatment.

Dual-Emitting Carbonized Polymer Dots Synthesized at Room Temperature for Ratiometric Fluorescence Sensing of Vitamin B12

Ratiometric fluorescence (FL) probes are highly desirable for highly sensitive and reliable assays. Dual-emitting carbonized polymer dots (CPDs) have great application prospects in building ratiometric FL sensors. However, dual-emitting CPDs are usually synthesized at high temperatures and high pressures, which not only increases the cost but also complicates the structure of CPDs. Here, we developed a facile strategy for the fabrication of dual-emitting CPDs at room temperature using tetrachlorobenzoquinone and ethylenediamine. The formation of CPDs was induced by Schiff base condensation reaction, enabling the following cross-linking polymerization process. The dual-emitting CPDs demonstrate good photostability and antioxidant capacity. Importantly, the typical dual-emission bands of the as-prepared CPDs are found to have a blue emission band at 445 nm with a maximum excitation of 350 nm and a yellow emission band at 575 nm with a maximum excitation of 440 nm. Based on the dual-emitting property of CPDs, a ratiometric FL nanoprobe is obtained for sensitive determination of vitamin B12 (VB12), as the inner filtering and static quenching effects between VB12 and CPDs allow effective quenching of the blue FL of CPDs, while the yellow FL is maintained. The established assay shows linear detection ranges of 0.25-100 μM with a low limit of detection of 0.14 μM. These findings provide new guidance for the facile preparation of CPDs with excellent dual-emitting optical properties, indicating good prospects in biosensing.

Carbon Quantum Dot-Incorporated Chitosan Hydrogel for Selective Sensing of Hg2+ Ions: Synthesis, Characterization, and Density Functional Theory Calculation

A carbon quantum dot-based chitosan hydrogel was prepared in this work as a fluorescence sensor for the selective sensing of Hg2+ ions. Among the eight tested metal ions, the prepared hydrogel exhibited remarkable sensing selectivity and sensitivity toward Hg2+. The results demonstrated that a prominent fluorescence quenching at 450 nm was observed in the presence of Hg2+ with a linear response range of 0-100.0 nM and an estimated limit of detection of 9.07 nM. The as-prepared hydrogel demonstrates pH-dependent fluorescence intensity and sensitivity. The highest fluorescence intensity and sensitivity were obtained under pH 5.0. The excellent sensing selectivity could be attributed to a strong interaction between the hydrogel film and Hg2+ ions to form complexes, which provokes an effective electron transfer for fluorescence quenching. Results from density functional theory (DFT) calculation confirm that the interaction energies (ΔIE) of the hydrogel with three toxic metal ions (Hg2+, Cd2+, and Pb2+) are in the following order: Hg2+ > Cd2+ > Pb2+.

Doped-carbon dots: Recent advances in their biosensing, bioimaging and therapy applications

As a fascinating class of fluorescent carbon dots (CDs), doped-CDs are now sparked intense research interest, particularly in the diverse fields of biomedical applications due to their unique advantages, including low toxicity, physicochemical, photostability, excellent biocompatibility, and so on. In this review, we have summarized the most recent developments in the literature regarding the employment of doped-CDs for pharmaceutical and medical applications, which are published over approximately the past five years. Accordingly, we discuss the toxicity and optical properties of these nanomaterials. Beyond the presentation of successful examples of the application of these multifunctional nanoparticles in photothermal therapy, photodynamic therapy, and antibacterial activity, we further highlight their application in the cellular labeling, dual imaging, and in vitro and in vivo bioimaging by use of fluorescent-, photoacoustic-, magnetic-, and computed tomography (CT)-imaging. The potency of doped-CDs was also described in the biosensing of ions, small molecules, and drugs in biological samples or inside the cells. Finally, the advantages, disadvantages, and common limitations of doped-CD technologies are reviewed, along with the future prospects in biomedical research. Therefore, this review provides a concise insight into the current developments and challenges in the field of doped-CDs, especially for biological and biomedical researchers.

Exploiting deep learning for predictable carbon dot design

In this study, we developed a deep convolution neural network (DCNN) model for predicting the optical properties of carbon dots (CDs), including spectral properties and fluorescence color under ultraviolet irradiation. These results demonstrate the powerful potential of DCNN for guiding the synthesis of CDs.

Label-free chlorine and nitrogen-doped fluorescent carbon dots for target imaging of lysosomes in living cells

Lysosomes with a single-layered membrane structure are mainly involved in the scavenging of foreign substances and play an important role in maintaining normal physiological functions of living cells. In this work, near-neutrally charged fluorescent carbon dots (CDs) were prepared with lipophilicity through a facile one-pot hydrothermal carbonization of chloranil and triethylenetetramine at 160 °C for 3 h. The as-obtained CDs are proved to have good photostability, low cost, and excellent biocompatibility. Importantly, the as-prepared CDs with high quantum yield of 30.8% show excitation-dependent emission with great stability, and thus, they can be well used for the long-term target imaging of lysosomes in living cells without further modification. Meanwhile, the CDs can quickly enter into the lysosomes within 30 min, and the green fluorescence (FL) of CDs reaches the plateau when incubated for 60 min. By comparing the fluorescent intensity, the information about distribution and amount of lysosomes in different cells can be obtained. The proposed CD-based strategy demonstrates great promise for label-free target imaging of lysosomes in living cells. Graphical abstract The near-neutral carbon dots (CDs) with lipophilicity are used as label-free fluorescent nanoprobes for the long-term imaging of lysosomes in living cells.

Fluorescent Carbon Quantum Dots-Synthesis,Functionalization and Sensing Application in FoodAnalysis

Carbon quantum dots (CQDs) with stable physicochemical properties are one of theemerging carbon nanomaterials that have been studied in recent years. In addition to the excellentoptical properties such as photoluminescence, photobleaching resistance and light stability, thismaterial also has favorable advantages of good biocompatibility and easy functionalization, whichmake it an ideal raw material for constructing sensing equipment. In addition, CQDs can combinedwith other kinds of materials to form the nanostructured composites with unique properties, whichprovides new insights and ideas for the research of many fields. In the field of food analysis,emerging CQDs have been deeply studied in food composition analysis, detection and monitoringtrace harmful substances and made remarkable research progress. This article introduces andcompares the various methods for CQDs preparation and reviews its related sensing applicationsas a new material in food components analysis and food safety inspection in recent years. It isexpected to provide a significant guidance for the further study of CQDs in the field of foodanalysis and detection. CQDs; synthesis; fluorescent sensing; food analysis.

Carbon dot-based composites for catalytic applications

We summarize the construction methods and influencing factors of CDs-based composites and discuss their catalytic applications, including photocatalysis, chemical catalysis, peroxidase-like catalysis, Fenton-like catalysis and electrocatalysis.