Production and Properties of Two Novel Exopolysaccharides Synthesized by a Thermophilic Bacterium Aeribacillus pallidus 418

Production and biological activities of exopolysaccharides synthesized by thermophilic bacilli isolated from hot springs in Türkiye

Thermophilic bacteria able to produce exopolysaccharides (EPSs) have become attractive in recent years. EPSs synthesized by thermophiles are worth investigating due to their unexplored structural and biological properties. In this study, EPSs from thermophilic, Gram-positive bacterial isolates were purified and tested for their biological activities. A total of one hundred seven thermophilic bacteria were screened for their ability to produce exopolysaccharides. Nine isolates belonging to Geobacillus, Parageobacillus, Aeribacillus, and Anoxybacillus genera with highest EPS production were chosen, and purified EPSs (20, 61, 74, 76, 78, 89, 106, 134, and 261) were used for biological activity studies. EPS yields of selected thermophilic bacteria ranged between 117 and 419 mg/L. Among the tested EPSs, 61, 106, and 261 showed antibacterial effect against E. faecalis JH2-2 at a final concentration of 1.5 mg/mL. EPS samples had significant antioxidant capacity, especially EPS 134, with the highest DPPH radical scavenging activity of 100% at a concentration of 5 mg/mL and the strongest reducing power. EPS 20 showed the highest lipid peroxidation inhibition effect at a rate of 31%. EPSs displayed weak alpha-amylase inhibition activity when compared with standard acarbose. The prebiotic indices of EPSs 20, 61, 76, 89, 134, and 261 were found to be higher than that of inulin, a representative prebiotic carbohydrate for all tested lactic acid bacteria in the study. All examined EPSs inhibited the biofilms formed by various bacteria depending on the test strain. Results indicated that thermophilic EPSs had remarkable antioxidant, prebiotic, and antibiofilm activities. Therefore, EPSs characterized in this study may have technological applications in health and food fields.

Characterization of Water-Soluble Extracellular Polysaccharide from Aeribacillus pallidus IM17

The production of the extracellular polysaccharide from the thermophilic bacterium Aeribacillus pallidus was carried out in the study. The polysaccharide was isolated and characterized by means of GC-MS, FT-IR, DSC, and XRD analyses. The rheological, foaming, and emulsifying properties of the polysaccharide were determined. Using a sucrose-rich medium, 27.1 mg dried EPS/100 mL was obtained with 94% carbohydrate and 1.5% protein. The monosaccharide profile of water-soluble EPS-IM17 was composed of rhamnose, arabinose, xylose, mannose, glucose, and galactose. The foaming capacity and stability of EPS-IM17 were 26.67% (± 4.71) and 40.01% (± 4.95), respectively, and the foaming stability was not affected by time. The emulsification index of EPS-IM17 was 64.54 (± 8.71) and decreased to 38.47 (± 10.44) after 24 h. EPS-IM17 had a crystalline structure. Solutions at different concentrations (10, 20, 40 mgmL-1) showed pseudoplastic behavior. In conclusion, this report could be a lead study for the use of Aeribacillus pallidus extracellular polysaccharide for different applications.

Characterization and biological activities of a novel exopolysaccharide produced from Geobacillus thermodenitrificans HBB 111 strain

In this study, EPS production conditions of Geobacillus thermodenitrificans HBB 111, a thermophilic microorganism, were optimized and the amount of produced EPS (EPS 111) was found to be 44.0 mg/L. EPS 111 was purified using ion exchange chromatography and gel filtration chromatography, and a single type of exopolysaccharide was obtained. The structure of the purified EPS 111 was evaluated by TLC, FTIR, NMR, and GC-MS, and it was observed that it contained hexose (glucose, fructose, galactose and mannose) and pentose sugars. From the SEM photographs, it was understood that EPS 111 had an amorphous, rough, and layered structure. It was found that purified EPS 111 had low cytotoxicity (2.3%) and exhibited high antioxidant activity and remarkable antidiabetic, prebiotic and fibrinolytic activities. It is very valuable that the purified EPS 111 in this study offers multiple biological activities compared to the thermophilic EPSs reported in the literature and has a high potential for use in biotechnological and biomedical fields.

Comprehensive review on recent trends and perspectives of natural exo-polysaccharides: Pioneering nano-biotechnological tools

Exopolysaccharides (EPSs), originating from various microbes, and mushrooms, excel in their conventional role in bioremediation to showcase diverse applications emphasizing nanobiotechnology including nano-drug carriers, nano-excipients, medication and/or cell encapsulation, gene delivery, tissue engineering, diagnostics, and associated treatments. Acknowledged for contributions to adsorption, nutrition, and biomedicine, EPSs are emerging as appealing alternatives to traditional polymers, for biodegradability and biocompatibility. This article shifts away from the conventional utility to delve deeply into the expansive landscape of EPS applications, particularly highlighting their integration into cutting-edge nanobiotechnological methods. Exploring EPS synthesis, extraction, composition, and properties, the discussion emphasizes their structural diversity with molecular weight and heteropolymer compositions. Their role as raw materials for value-added products takes center stage, with critical insights into recent applications in nanobiotechnology. The multifaceted potential, biological relevance, and commercial applicability of EPSs in contemporary research and industry align with the nanotechnological advancements coupled with biotechnological nano-cleansing agents are highlighted. EPS-based nanostructures for biological applications have a bright future ahead of them. Providing crucial information for present and future practices, this review sheds light on how eco-friendly EPSs derived from microbial biomass of terrestrial and aquatic environments can be used to better understand contemporary nanobiotechnology for the benefit of society.

Development of Biological Coating from Novel Halophilic Exopolysaccharide Exerting Shelf-Life-Prolonging and Biocontrol Actions for Post-Harvest Applications

The literature presents the preserving effect of biological coatings developed from various microbial sources. However, the presented work exhibits its uniqueness in the utilization of halophilic exopolysaccharides as food coating material. Moreover, such extremophilic exopolysaccharides are more stable and economical production is possible. Consequently, the aim of the presented research was to develop a coating material from marine exopolysaccharide (EPS). The significant EPS producers having antagonistic attributes against selected phytopathogens were screened from different marine water and soil samples. TSIS01 isolate revealed the maximum antagonism well and EPS production was selected further and characterized as Bacillus tequilensis MS01 by 16S rRNA analysis. EPS production was optimized and deproteinized EPS was assessed for biophysical properties. High performance thin layer chromatography (HPTLC) analysis revealed that EPS was a heteropolymer of glucose, galactose, mannose, and glucuronic acid. Fourier transform infrared spectroscopy, X-ray diffraction, and UV-visible spectra validated the presence of determined sugars. It showed high stability at a wide range of temperatures, pH and incubation time, ≈1.63 × 106 Da molecular weight, intermediate solubility index (48.2 ± 3.12%), low water holding capacity (12.4 ± 1.93%), and pseudoplastic rheologic shear-thinning comparable to xanthan gum. It revealed antimicrobial potential against human pathogens and antioxidants as well as anti-inflammatory potential. The biocontrol assay of EPS against phytopathogens revealed the highest activity against Alternaria solani. The EPS-coated and control tomato fruits were treated with A. solani suspension to check the % disease incidence, which revealed a significant (p < 0.001) decline compared to uncoated controls. Moreover, it revealed shelf-life prolonging action on tomatoes comparable to xanthan gum and higher than chitosan. Consequently, the presented marine EPS was elucidated as a potent coating material to mitigate post-harvest losses.

Exploring Extremophiles from Bulgaria: Biodiversity, Biopolymer Synthesis, Functional Properties, Applications

Bulgaria stands out as a country rich in diverse extreme environments, boasting a remarkable abundance of mineral hot waters, which positions it as the second-largest source of such natural resources in Europe. Notably, several thermal and coastal solar salterns within its territory serve as thriving habitats for thermophilic and halophilic microorganisms, which offer promising bioactive compounds, including exopolysaccharides (EPSs). Multiple thermophilic EPS producers were isolated, along with a selection from several saltern environments, revealing an impressive taxonomic and bacterial diversity. Four isolates from three different thermophilic species, Geobacillus tepidamans V264, Aeribacillus pallidus 418, Brevibacillus thermoruber 423, and Brevibacillus thermoruber 438, along with the halophilic strain Chromohalobacter canadensis 28, emerged as promising candidates for further exploration. Optimization of cultivation media and conditions was conducted for each EPS producer. Additionally, investigations into the influence of aeration and stirring in laboratory bioreactors provided valuable insights into growth dynamics and polymer synthesis. The synthesized biopolymers showed excellent emulsifying properties, emulsion stability, and synergistic interaction with other hydrocolloids. Demonstrated biological activities and functional properties pave the way for potential future applications in diverse fields, with particular emphasis on cosmetics and medicine. The remarkable versatility and efficacy of biopolymers offer opportunities for innovation and development in different industrial sectors.

Marine versus Non-Marine Bacterial Exopolysaccharides and Their Skincare Applications

Bacteria are well-known to synthesize high molecular weight polysaccharides excreted in extracellular domain, which constitute their protective microenvironment. Several bacterial exopolysaccharides (EPS) are commercially available for skincare applications in cosmetic products due to their unique structural features, conferring valuable biological and/or textural properties. This review aims to give an overview of bacterial EPS, an important group of macromolecules used in cosmetics as actives and functional ingredients. For this purpose, the main chemical characteristics of EPS are firstly described, followed by the basics of the development of cosmetic ingredients. Then, a focus on EPS production, including upstream and downstream processes, is provided. The diversity of EPS used in the cosmetic industry, and more specifically of marine-derived EPS is highlighted. Marine bacteria isolated from extreme environments are known to produce EPS. However, their production processes are highly challenging due to high or low temperatures; yield must be improved to reach economically viable ingredients. The biological properties of marine-derived EPS are then reviewed, resulting in the highlight of the challenges in this field.

The role of bacterial exopolysaccharides (EPS) in the synthesis of antimicrobial silver nanomaterials: A state-of-the-art review

The emergence of multi-drug resistant (MDR) pathogens poses a significant global health concern due to the failure of conventional medical treatment. As a result, the development of several metallic (Ag, Au, Zn, Ti, etc.) nanoparticles, has gained prominence as an alternative to conventional antimicrobial therapies. Among these, green-synthesized silver nanoparticles (AgNPs) have gained significant attention due to their notable efficiency and broad spectrum of antimicrobial activity. Bacterial exopolysaccharides (EPS) have recently emerged as a promising biological substrate for the green synthesis of AgNPs. EPS possess polyanionic functional groups (hydroxyl, carboxylic, sulfate, and phosphate) that effectively reduce and stabilize AgNPs. EPS-mediated AgNPs exhibit a wide range of antimicrobial activity against various pathogenic microbes, including Gram-positive and Gram-negative bacteria, as well as fungi. The extraction and purification of bacterial EPS play a vital role in obtaining high-quality and -quantity EPS for industrial applications. This study focuses on the comprehensive methodology of EPS extraction and purification, encompassing screening, fermentation optimization, pretreatment, protein elimination, precipitation, and purification. The review specifically highlights the utilization of bacterial EPS-mediated AgNPs, covering EPS extraction, the synthesis mechanism of green EPS-mediated AgNPs, their characterization, and their potential applications as antimicrobial agents against pathogens. These EPS-mediated AgNPs offer numerous advantages, including biocompatibility, biodegradability, non-toxicity, and eco-friendliness, making them a promising alternative to traditional antimicrobials and opening new avenues in nanotechnology-based approaches to combat microbial infections.

The structure, characterization and immunomodulatory potential of exopolysaccharide produced by Planococcus rifietoensis AP-5 from deep-sea sediments of the Northwest Pacific

Polysaccharides derived from microorganisms exhibit diverse structures and bioactivities, making them promising candidates for the treatment of various diseases. However, marine-derived polysaccharides and their activities are relatively little known. In this work, fifteen marine strains were isolated from surface sediments in the Northwest Pacific Ocean for screening of EPS production. Planococcus rifietoensis AP-5 produced a maximum yield of EPS at 4.80 g/L. The purified EPS (referred to as PPS) had a molecular weight of 51,062 Da and contained amino, hydroxyl, and carbonyl groups as its major functional groups. PPS primarily consisted of →3)-α-D-Galp-(1 → 4)-α-D-Manp-(1 → 2)-α-D-Manp-(1 → 4)-α-D-Manp-(1 → 4,6)-α-D-Glcp-(1 → 6)-β-D-Galp-(1→, with a branch consisting of T-β-D-Glcp-(1→. Additionally, surface morphology of PPS was hollow, porous, and sphere-like stack. PPS primarily contained C, N, and O elements, with a surface area of 33.76 m2/g, a pore volume of 0.13 cc/g, and a pore diameter of 1.69 nm, respectively. Based on the TG curve, the degradation temperature of PPS was measured to be 247 °C. Furthermore, PPS demonstrated immunomodulatory activity through dose-dependently upregulating the expression level of cytokines. It significantly enhanced the cytokine secretion at a concentration of 5 μg/mL. To sum up, this study offers valuable insights for screening marine polysaccharide-based immunomodulators.

Exopolysaccharide Production from Marine-Derived Brevundimonas huaxiensis Obtained from Estremadura Spur Pockmarks Sediments Revealing Potential for Circular Economy

Marine environments represent an enormous biodiversity reservoir due to their numerous different habitats, being abundant in microorganisms capable of producing biomolecules, namely exopolysaccharides (EPS), with unique physical characteristics and applications in a broad range of industrial sectors. From a total of 67 marine-derived bacteria obtained from marine sediments collected at depths of 200 to 350 m from the Estremadura Spur pockmarks field, off the coast of Continental Portugal, the Brevundimonas huaxiensis strain SPUR-41 was selected to be cultivated in a bioreactor with saline culture media and glucose as a carbon source. The bacterium exhibited the capacity to produce 1.83 g/L of EPS under saline conditions. SPUR-41 EPS was a heteropolysaccharide composed of mannose (62.55% mol), glucose (9.19% mol), rhamnose (19.41% mol), glucuronic acid (4.43% mol), galactose (2.53% mol), and galacturonic acid (1.89% mol). Moreover, SPUR-41 EPS also revealed acyl groups in its composition, namely acetyl, succinyl, and pyruvyl. This study revealed the importance of research on marine environments for the discovery of bacteria that produce new value-added biopolymers for pharmaceutical and other biotechnological applications, enabling us to potentially address saline effluent pollution via a sustainable circular economy.

Medium development and production of carotenoids and exopolysaccharides by the extremophile Rhodothermus marinus DSM16675 in glucose-based defined media

BACKGROUND

The marine thermophilic bacterium Rhodothermus marinus can degrade many polysaccharides which makes it interesting as a future cell factory. Progress using this bacterium has, however, been hampered by limited knowledge on media and conditions for biomass production, often resulting in low cell yields and low productivity, highlighting the need to develop conditions that allow studies of the microbe on molecular level. This study presents development of defined conditions that support growth, combined with evaluation of production of carotenoids and exopolysaccharides (EPSs) by R. marinus strain DSM 16675.

RESULTS

Two defined media were initially prepared: one including a low addition of yeast extract (modified Wolfe's medium) and one based on specific components (defined medium base, DMB) to which two amino acids (N and Q), were added. Cultivation trials of R. marinus DSM 16675 in shake flasks, resulted in maximum cell densities (OD_620 nm) of 2.36 ± 0.057, cell dry weight (CDW) 1.2 ± 0.14 mg/L, total carotenoids 0.59 × 10^-3 mg/L, and EPSs 1.72 ± 0.03 mg/L using 2 g/L glucose in DMB. In Wolfe's medium (supplemented by 0.05 g/L yeast extract and 2.5 g/L glucose), maximum OD_620 nm was 2.07 ± 0.05, CDW 1.05 ± 0.07 mg/L, total carotenoids 0.39 × 10^-3 mg/L, and EPSs 1.74 ± 0.2 mg/L. Growth trials at 5 g/L glucose in these media either failed or resulted in incomplete substrate utilization. To improve reproducibility and increase substrate utilization, a screening of macroelements (e.g. phosphate) in DMB, was combined with use of trace elements and vitamins of the modified Wolfe's medium. The resulting defined minimal R. marinus medium, (DRM), allowed reproducible cultivations to a final OD_620nm of 6.6 ± 0.05, CDW 2.85 ± 0.07 mg/L, a maximum specific growth rate (µ_max) of 0.26 h^-1, total carotenoids 0.77 × 10^-3 mg/L and EPSs 3.4 ± 0.17 mg/L in cultivations supplemented with up to 5 g/L glucose.

CONCLUSION

A minimal defined medium (DRM) was designed that resulted in reproducible growth and an almost doubled formation of both total carotenoids and EPSs. Such defined conditions, are necessary for systematic studies of metabolic pathways, to determine the specific requirements for growth and fully characterize metabolite production.

Exopolysaccharide production from Alkalibacillus sp. w3: statistical optimization and biological activity

Microbial exopolysaccharides (EPS) provide a broad range of applications. Thus, there is an increasing interest in the production, characterization, and use of EPS derived from various microorganisms. Extremophile polysaccharides have unique properties and applications due to its unique structures. The importance of exopolysaccharides synthesized by a new bacterial strain, Alkalibacillus sp. w3, was highlighted in this study. Alkalibacillus sp. w3, a haloalkalitolerant firmicute that was recovered from a salt lake, was optimized for EPS production, and its biological activities were studied. Exopolysaccharide synthesis was observed in Horikoshi I broth medium. The optimal culture conditions for achieving the highest exopolysaccharide production were a 7-day incubation period, pH 10, and 250 g/L of NaCl. The most effective carbon and nitrogen sources for EPS production were glucose and a combination of yeast extract and peptone. Additionally, Plackett-statistical Burman’s design showed that all factors tested had a favorable impact, with glucose having the greatest significance on the production of EPS. The model’s best predictions for culture conditions resulted in a two-fold improvement in EPS production compared to the original yield before optimization. The recovered EPS contained 65.13% carbohydrates, 30.89% proteins, and 3.98% lipids. Moreover, EPS produced by Alkalibacillus sp. w3 demonstrated anticancer activity against hepatocellular carcinoma (HepG2) and human colon carcinoma (HCT-116) cell lines, with IC50 values as low as 11.8 and 15.5 µg/mL, respectively, besides antibacterial activity against various Gram-positive, Gram-negative bacteria, and yeast. Based on these results, EPS made by Alkalibacillus sp. w3 has many useful properties, which make it suitable for use in the medical field.

Molecular Characterization and Biocompatibility of Exopolysaccharide Produced by Moderately Halophilic Bacterium Virgibacillus dokdonensis from the Saltern of Kumta Coast

The use of natural polysaccharides as biomaterials is gaining importance in tissue engineering due to their inherent biocompatibility. In this direction, the present study aims to explore the structure and biocompatibility of the EPS produced by Virgibacillus dokdonensis VITP14. This marine bacterium produces 17.3 g/L of EPS at 96 h of fermentation. The EPS was purified using ion exchange and gel permeation chromatographic methods. The porous web-like structure and elemental composition (C, O, Na, Mg, P, S) of the EPS were inferred from SEM and EDX analysis. AFM analysis revealed spike-like lumps with a surface roughness of 84.85 nm. The zeta potential value of −10 mV indicates the anionic nature of the EPS. Initial molecular characterization showed that the EPS is a heteropolysaccharide composed of glucose (25.8%), ribose (18.6%), fructose (31.5%), and xylose (24%), which are the monosaccharide units in the HPLC analysis. The FTIR spectrum indicates the presence of functional groups/bonds typical of EPSs (O-H, C-H, C-O-H, C-O, S=O, and P=O). The polymer has an average molecular weight of 555 kDa. Further, NMR analysis revealed the monomer composition, the existence of two α- and six β-glycosidic linkages, and the branched repeating unit as → 1)[α-D-Xylp-(1 → 2)-α-D-Glcp-(1 → 6)-β-D-Glcp-(1 → 5)]-β-D-Frup-(2 → 2)[β-D-Xylp-(1 → 4)]-β-D-Xylp-(1 → 6)-β-D-Fruf-(2 → 4)-β-D-Ribp-(1 →. The EPS is thermally stable till 251.4 °C. X-ray diffraction analysis confirmed the semicrystalline (54.2%) nature of the EPS. Further, the EPS exhibits significant water solubility (76.5%), water-holding capacity (266.8%), emulsifying index (66.8%), hemocompatibility (erythrocyte protection > 87%), and cytocompatibility (cell viability > 80% on RAW264.7 and keratinocyte HaCaT cells) at higher concentrations and prolongs coagulation time in APTT and PT tests. Our research unveils the significant biocompatibility of VITP14 EPS for synthesizing a variety of biomaterials.

Hydrating Capabilities of the Biopolymers Produced by the Marine Thermophilic Bacillus horneckiae SBP3 as Evaluated by ATR-FTIR Spectroscopy

The surfactin-like lipopeptide (BS-SBP3) and the exopolysaccharide (EPS-SBP3) produced by the polyextremophilic Bacillus horneckiae SBP3 (DSM 103063) have been recently described as valuable biopolymers useful in biotechnological applications. To investigate the hydrating capabilities of BS-SBP3 and EPS-SBP3, here we evaluated (i) their wetting properties, measuring the contact angle; (ii) their moisture uptake abilities using the gravimetric method; and (iii) their hydrating states (from 0 to 160% w/w of water content) using ATR-FTIR spectroscopy. BS-SBP3 reduced the water contact angle on a hydrophobic surface from 81.7° to 51.3°, whereas the contact angle in the presence of EPS-SBP3 was 72.9°, indicating that BS-SBP3 improved the wettability of the hydrophobic surface. In the moisture uptake tests, EPS-SBP3 absorbed more water than BS-SBP3, increasing its weight from 10 mg to 30.1 mg after 36 h of 100% humidity exposure. Spectral distance and cross-correlation analyses were used to evaluate the molecular changes of the two biopolymers during the hydration process. As the water concentration increased, BS-SBP3 spectra changed in intensity in the two contributions of the OH-stretching band named "closed" and "open" (3247 and 3336 cm^-1, respectively). Differently, the spectra of EPS-SBP3 exhibited a broader peak (3257 cm^-1), which shifted at higher water concentrations. As evaluated by the spectral distance and the wavelet cross-correlation analysis, the OH-stretching bands of the BS-SBP3 and EPS-SBP3 changed as a function of water content, with two different sigmoidal trends having the inflection points at 80% and 48%, respectively, indicating peculiar water-properties of each biopolymer. As wetting agents, these biopolymers might replace industrially manufactured additives in agriculture and the food and cosmetic industries.

Exopolysaccharides from Marine Microbes: Source, Structure and Application

The unique living environment of marine microorganisms endows them with the potential to produce novel chemical compounds with various biological activities. Among them, the exopolysaccharides produced by marine microbes are an important factor for them to survive in these extreme environments. Up to now, exopolysaccharides from marine microbes, especially from extremophiles, have attracted more and more attention due to their structural complexity, biodegradability, biological activities, and biocompatibility. With the development of culture and separation methods, an increasing number of novel exopolysaccharides are being found and investigated. Here, the source, structure and biological activities of exopolysaccharides, as well as their potential applications in environmental restoration fields of the last decade are summarized, indicating the commercial potential of these versatile EPS in different areas, such as food, cosmetic, and biomedical industries, and also in environmental remediation.

Characterization on structure and bioactivities of an exopolysaccharide from Lactobacillus curvatus SJTUF 62116

This study aimed to investigate the chemical structure, physicochemical properties, antioxidant capacity, antibacterial ability and anti-biofilm formation activity of an exopolysaccharide (EPS) produced by Lactobacillus curvatus SJTUF 62116 from the fish Gymnocypris przewalskii. The purified EPS, denoted as EPS-1, was mainly composed of glucose and mannose at a relative molar ratio of 1:1.05 with molecular weight of 31.9 kDa. The chemical structure of EPS-1 was consisted of →2)-α-D-Manp-(1→, →4)-α-D-Manp-(1→, →3,6)-α-D-Manp-(1→, T-β-D-Glcp-(1→, →6)-β-D-Glcp-(1→, and →3)-β-D-Glcp-(1→ glycosidic bonds. A sheet-like structure of dried EPS-1 was determined by scanning electron microscope (SEM), whilst a peak-shaped structure of EPS-1 was observed by atomic force microscope (AFM). The degradation temperature of EPS-1 was determined as 300.21 °C using thermogravimetric analysis (TGA). Moreover, the antioxidant capacity of EPS-1 at a concentration of 5.0 mg/mL against DPPH and ABTS was 84.50% and 92.53%, respectively. Furthermore, EPS-1 exhibited acceptable bacteriostatic efficacy against S. Enteritidis, E. coli, and S.aureus with significant inhibition of S. Enteritidis biofilm formation.

A review of extracellular polysaccharides from extreme niches: An emerging natural source for the biotechnology. From the adverse to diverse!

Every year, new organisms that survive and colonize adverse environments are discovered and isolated. Those organisms, called extremophiles, are distributed throughout the world, both in aquatic and terrestrial environments, such as sulfurous marsh waters, hydrothermal springs, deep waters, volcanos, terrestrial hot springs, marine saltern, salt lakes, among others. According to the ecosystem inhabiting, extremophiles are categorized as thermophiles, psychrophiles, halophiles, acidophiles, alkalophilic, piezophiles, saccharophiles, metallophiles and polyextremophiles. They have developed chemical adaptation strategies that allow them to maintain their cellular integrity, altering physiology or improving repair capabilities; one of them is the biosynthesis of extracellular polysaccharides (EPS), which constitute a slime and hydrated matrix that keep the cells embedded, protecting from environmental stress (desiccation, salinity, temperature, radiation). EPS have gained interest; they are explored by their unique properties such as structural complexity, biodegradability, biological activities, and biocompatibility. Here, we present a review concerning the biosynthesis, characterization, and potential EPS applications produced by extremophile microorganisms, namely, thermophiles, halophiles, and psychrophiles. A bibliometric analysis was conducted, considering research articles published within the last two decades. Besides, an overview of the culture conditions used for extremophiles, the main properties and multiple potential applications of their EPS is also presented.

Efficient biosynthesis of polysaccharide welan gum in heat shock protein-overproducing Sphingomonas sp. via temperature-dependent strategy

Cell growth and product formation are two critical processes in polysaccharide welan biosynthesis, but the conflict between them is often encountered. In this study, a temperature-dependent strategy was designed for two-stage welan production through overexpressing heat shock proteins in Sphingomonas sp. The first stage was cell growth phase with higher TCA cycle activity at 42 °C; the second stage was welan formation phase with higher precursor synthesis pathway activity at 37 °C. The highest welan concentration 37.5 g/L was achieved after two-stage process. Ultimately, this strategy accumulated welan yield of 79.2 g/100 g glucose and productivity of 0.62 g/L/h at 60 h, which were the best reported results so far. The duration of fermentation was shortened. Besides, rheological behavior of welan gum solutions remained stable at wide range of temperature, pH, and NaCl. These results indicated that this approach efficiently improved welan synthesis.

Rheological, textural and emulsifying properties of an exopolysaccharide produced by Mesorhizobium loti grown on a crude glycerol-based medium

In the present study, a new extracellular polysaccharide (EPS-M816) was obtained during the growth of Mesorhizobium loti Semia 816 on a crude glycerol-based medium. EPS-M816 precipitate mainly consisted of carbohydrates (82.54%) and proteins (11.31%), and the weight average molecular weight was estimated at 1.646 × 10⁶ Da. The biopolymer was characterized by FT-IR and NMR spectroscopy, and was found to have typical functional groups of other rhizobial polysaccharides. Furthermore, the rheological and emulsifying properties were investigated. The EPS-M816 solution (1.0% w/v) showed typical pseudoplastic non-Newtonian fluid behavior, and the addition of sodium and potassium chloride (1 mol L^-1) increased the apparent viscosity. Regarding its emulsification activity, EPS-M816 formed emulsions with different food-grade vegetable oils (soybean, rice, canola, sunflower and corn oils), showing emulsification index values over 65% in 24 h, indicative of strong emulsion-stabilizing capacity. The biopolymer was able to form gels with texture parameters similar to those reported for xanthan gum and low syneresis. Overall, these results suggest that EPS-M816 is a good candidate for application in the food, cosmetics and pharmaceutical industries as a thickening, gelling, stabilizing and emulsifying agent.

Thermostable enzymes and polysaccharides produced by thermophilic bacteria isolated from Bulgarian hot springs

Thermostable enzymes (thermozymes) have been recognized as extremophilic compounds with a greatest biotechnological importance in different industrial areas. Quite recently exopolysaccharides (EPSs) synthesized by thermophiles became an object of increased research interest due to their unique properties appropriate for some specific industrial needs. Thermophilic producers of biotechnologically valuable enzymes and novel EPS were isolated by our group from Bulgarian thermal springs with a diverse geotectonic origin and different water properties. Laboratory reactor processes for their production were developed in batch and continuous cultures. Some of the synthesized thermostable enzymes were among the first described in their groups, for example, the single known thermostable gellan lyase that demonstrated specific activity higher than that of the mesophilic enzymes. Isolated by us thermostable xylanase was able to degrade more than 60% of beechwood xylan in a coprocess with an archaeal β-xylosidase. Lipase purified by us was active between 55 and 90°C with an optimum at 75-80°C in a large pH range. It was able to degrade a broad range of substrates. Isolates from Bulgarian hot springs synthesized EPS with novel composition and high thermostability. Thus, Bulgarian hot springs harbor a wide set of thermophilic producers of novel enzymes and EPS with potential for a large number of biotechnological applications.

Purification and biochemical characterization of a novel thermostable serine alkaline protease from Aeribacillus pallidus C10: a potential additive for detergents

An extracellular thermostable alkaline serine protease enzyme from Aeribacillus pallidus C10 (GenBank No: KC333049), was purified 4.85 and 17. 32-fold with a yield of 26.9 and 19.56%, respectively, through DE52 anion exchange and Probond affinity chromatography. The molecular mass of the enzyme was determined through sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), with approximately 38.35 kDa. The enzyme exhibited optimum activity at pH 9 and at temperature 60 °C. It was determined that the enzyme had remained stable at the range of pH 7.0-10.0, and that it had preserved more than 80% of its activity at a broad temperature range (20-80 °C). The enzyme activity was found to retain more than 70% and 55% in the presence of organic solvents and commercial detergents, respectively. In addition, it was observed that the enzyme activity had increased in the presence of 5% SDS. KM and Vmax values were calculated as 0.197 mg/mL and 7.29 μmol.mL-1.min-1, respectively.

Aeribacillus composti sp. nov., a thermophilic bacillus isolated from olive mill pomace compost

A Gram-stain-positive, aerobic, endospore-forming, thermophilic bacterium, strain N.8^T, was isolated from the curing step of an olive mill pomace compost sample, collected at the Composting Experimental Centre (CESCO, Salerno, Italy). Strain N.8^T, based on 16S rRNA gene sequence similarities, was most closely related to Aeribacillus pallidus strain H12^T (=DSM 3670^T) (99.8 % similarity value) with a 25 % DNA-DNA relatedness value. Cells were rod-shaped, non-motile and grew optimally at 60 °C and pH 9.0, forming cream colonies. Strain N.8 was able to grow on medium containing up to 9.0 % (w/v) NaCl with an optimum at 6.0 % (w/v) NaCl. The cellular membrane contained MK-7, and C16 : 0 (48.4 %), iso-C17 : 0 (19.4 %) and anteiso-C17 : 0 (14.6 %) were the major cellular fatty acids. The DNA G+C content was 40.5 mol%. Based on phenotypic characteristics, 16S rRNA gene sequences, DNA-DNA hybridization values and chemotaxonomic characteristics, strain N.8^T represents a novel species of the genus Aeribacillus, for which the name Aeribacillus composti sp. nov. is proposed. The type strain is N.8^T (=KCTC 33824^T=JCM 31580^T).

Biofilm characteristics and evaluation of the sanitation procedures of thermophilic Aeribacillus pallidus E334 biofilms

The ability of Aeribacillus pallidus E334 to produce pellicle and form a biofilm was studied. Optimal biofilm formation occurred at 60 °C, pH 7.5 and 1.5% NaCl. Extra polymeric substances (EPS) were composed of proteins and eDNA (21.4 kb). E334 formed biofilm on many surfaces, but mostly preferred polypropylene and glass. Using CLSM analysis, the network-like structure of the EPS was observed. The A. pallidus biofilm had a novel eDNA content. DNaseI susceptibility (86.8% removal) of eDNA revealed its importance in mature biofilms, but the purified eDNA was resistant to DNaseI, probably due to its extended folding outside the matrix. Among 15 cleaning agents, biofilms could be removed with alkaline protease and sodium dodecyl sulphate (SDS). The removal of cells from polypropylene and biomass on glass was achieved with combined SDS/alkaline protease treatment. Strong A. pallidus biofilms could cause risks for industrial processes and abiotic surfaces must be taken into consideration in terms of sanitation procedures.

Diversity and hydrocarbon-degrading potential of epiphytic microbial communities on Platanus x acerifolia leaves in an urban area

Plants and their associated bacteria have been suggested to play a role in air pollution mitigation, especially in urban areas. Particularly, epiphytic bacteria might be able to degrade atmospheric hydrocarbons. However, phyllospheric bacterial communities are highly variable depending on several factors, e.g. tree species, leaf age and physiology, environmental conditions. In this work, bacterial communities hosted by urban Platanus x acerifolia leaves were taxonomically characterized using high throughput sequencing of 16S rRNA gene, and their temporal and spatial variability was assessed by comparing samples collected from different locations in the city of Milan (Italy) and in different months. The diversity of alkane hydroxylase (alkB) phylotypes harboured by phyllospheric bacteria associated to urban Platanus trees was also evaluated. Results revealed that temporal changes, which are related to seasonality, acted as a stronger driver both on Platanus phyllospheric community structure and on alkB phylotype diversity than sampling location. Biodiversity of bacterial communities decreased along the growing season, leading to a strong dominance by the genus Stenotrophomonas. On the contrary, diversity of hydrocarbon-degrading populations increased over the months, although it resulted lower than that reported for other habitats. It was therefore hypothesized that atmospheric hydrocarbons might play a key role in the selection of phyllospheric populations in urban areas.

Production of exopolysaccharide from rhizobia with potential biotechnological and bioremediation applications

The potential use of rhizobia under controlled fermentation conditions may result in the production of new extracellular polymeric substances (EPS) having novel and superior properties that will open up new areas of industrial applications and thus increase their demand. The production of EPS and the stability of emulsions formed with soybean oil, diesel oil and toluene using different concentrations of purified EPS derived from wild-type and mutant strains of Rhizobium tropici SEMIA 4077 was investigated. The EPS was defined as a heteropolysaccharide composed of six constituent monosaccharides that displayed higher intrinsic viscosity and pseudoplastic non-Newtonian fluid behavior in an aqueous solution. The ratio between the total EPS production and the cellular biomass was 76.70 for the 4077::Z04 mutant strain and only 8.10 for the wild-type strain. The EPS produced by the wild-type R. tropici SEMIA 4077 resulted in more stable emulsions with the tested toluene than xanthan gum, and the emulsification indexes with hydrocarbons and soybean oil were higher than 50%, indicating strong emulsion-stabilizing capacity. These results demonstrate that the EPS of R. tropici strains could be attractive for use in industrial and environmental applications, as it had higher intrinsic viscosity and good emulsification activity.

Biosynthesis of Extracellular Polymeric Substances by the Marine BacteriumSaccharophagus degradansunder Different Nutritional Conditions

The effect of carbon source, carbon to nitrogen (C/N) ratio, and limitation in nutrients (N, P, K, Ca, Mg, and Fe) on extracellular polymeric substances (EPS) synthesis by the marine bacteriumSaccharophagus degradanswas studied. This strain was able to grow in mineral medium and produce EPS with different efficiency according to the C source used (g EPS/L): glucose or starch (1.5 ± 0.2); galactose, sucrose, or xylose (0.7 ± 0.2); and fructose (0.3 ± 0.1). The C/N ratio (glucose/ammonium) had a significant effect on EPS biosynthesis due to its production rise as the C/N ratio increased from 3 to 100 (0.7 to 2.1 g EPS/L). It was also observed that limitation in nutrients such as N, P, K, Ca, Mg, and Fe also favored EPS biosynthesis. When taking into account both factors (C/N ratio, 100; nutrients limitation, 50%) a positive synergistic effect was noted on EPS production since under these conditions the maximum concentration obtained was 4.12 ± 0.3 g/L after 72 h of culture. The polymer was found to be a polysaccharide of mainly glucose, mannose, and galactose. This is the first report on EPS production byS. degradanswhich is a new feature of this versatile marine bacterium.

Fermentation technologies for the optimization of marine microbial exopolysaccharide production

In the last decades, research has focused on the capabilities of microbes to secrete exopolysaccharides (EPS), because these polymers differ from the commercial ones derived essentially from plants or algae in their numerous valuable qualities. These biopolymers have emerged as new polymeric materials with novel and unique physical characteristics that have found extensive applications. In marine microorganisms the produced EPS provide an instrument to survive in adverse conditions: They are found to envelope the cells by allowing the entrapment of nutrients or the adhesion to solid substrates. Even if the processes of synthesis and release of exopolysaccharides request high-energy investments for the bacterium, these biopolymers permit resistance under extreme environmental conditions. Marine bacteria like Bacillus, Halomonas, Planococcus, Enterobacter, Alteromonas, Pseudoalteromonas, Vibrio, Rhodococcus, Zoogloea but also Archaea as Haloferax and Thermococcus are here described as EPS producers underlining biopolymer hyperproduction, related fermentation strategies including the effects of the chemical composition of the media, the physical parameters of the growth conditions and the genetic and predicted experimental design tools.