Real-Time PCR-Based Ready-to-Use Multi-Target Analytical System for GMO Detection

Virtual Multiplexing Chamber-Based Digital PCR for Camel Milk Authentication Applications

In this work, we proposed a chamber-based digital PCR (cdPCR) microfluidic device that is compatible with fluorescence imaging systems for milk adulteration detection. The device enables the digitalization of PCR reagents, which are loaded into microchambers, and subsequent thermocycling for DNA amplification. Then, fluorescence images of the microchambers are captured and analyzed to obtain the total number of positive chambers, which is used to calculate the copy numbers of the target DNA, enabling accurate quantitative detections to determine intentional milk adulteration from accidental contaminations. The validation of this device is performed by camel milk authentication. We performed 25,600-chamber virtual multiplexing cdPCR tests using 40 × 40 chamber devices for the detection of DNA templates extracted from pure or mixed milk with different dilutions. Then, the cdPCR chip was used to authenticate blind milk samples, demonstrating its efficacy in real biotechnical applications.

Development of Genomic DNA Certified Reference Materials for Genetically Modified Rice Kefeng 6

The application of certified reference materials (CRMs) to genetically modified organism (GMO) detection is essential for guaranteeing the accuracy, comparability, and traceability of quantitative results over time and among laboratories. Clean leaves from GM rice Kefeng 6 were used as raw materials to develop a batch of genomic DNA (gDNA) CRMs. The optimized KF6/PLD duplex digital PCR was used for collaborative characterization of Kefeng 6 gDNA CRMs by eight qualified laboratories; this batch of gDNA CRMs was certified for two property values, namely, copy number ratio and copy number concentration, which were 1.03 ± 0.04 and (1.60 ± 0.11) × 10⁵ copies/μL, respectively. The gDNA CRMs displayed good between-vial homogeneity when the minimum sample intake of 2 μL was taken into account. Stability studies indicated that the gDNA CRMs should be transported below 25 °C, and cold chain transport was recommended. Shelf life was assessed to be at least 12 months, and when using gDNA CRMs, freeze-thaw should not exceed 10 cycles. Compared to the available gDNA CRMs in the market, this batch of gDNA CRMs has accurate property values with combined uncertainties, providing user-friendly calibrators for GM rice Kefeng 6 inspection and monitoring. The development and characterization of Kefeng 6 gDNA CRMs contribute to the establishment of a copy number-based reference system for GMO detection.

Potential risk evaluation for unintended entry of genetically modified plant Propagating material in Europe through import of seeds and animal feed - the experience of Latvia

Significant attention has been drawn to the adventitious and technically unavoidable presence of genetically modified (GM) organisms in the food and feed imported into the European Union (EU), while the potential presence of GM seeds in material for cultivation is less studied. Here we report a study from an EU member state, Latvia, during years 2017-2018 regarding monitoring for the presence of GM seeds in certified seed and animal feed material. Eighty-two and 28 samples of seeds intended for cultivation were analyzed in 2017 and 2018, respectively. One soybean sample contained MON40-3-2 soybean seeds (0.09 ± 0.01%) and one maize sample contained MON810 maize seeds (0.08 ± 0.01%). In addition, 102 samples of feed imported from outside of the EU or produced locally were also analyzed for the presence of genetically modified organisms (GMOs) and viability of grains. One oilseed rape cake sample contained GT73 (1.04 ± 0.01%) and one soybean cake sample contained MON40-3-2 (<0.045%). One sample of declared MON40-3-2 GM soybean cake was confirmed to be positive, with MON40-3-2 content of 94.78 ± 10.01%. One soybean sample submitted by feed producer and originating from Argentina contained 54.9 ± 1.1% of MON40-3-2 and one rapeseed sample originating from Ukraine contained 5.30 ± 3.95% of GT73. Although only two seed samples contained low levels of GMOs authorized in the EU for food and feed uses, this study reinforced the need to maintain regular monitoring programs that assist farmers in their efforts to comply with the current EU GMO legislation.

Exposure of livestock to GM feeds: Detectability and measurement

This review explores the possibilities to determine livestock consumption of genetically modified (GM) feeds/ingredients including detection of genetically modified organism (GMO)-related DNA or proteins in animal samples, and the documentary system that is in place for GM feeds under EU legislation. The presence and level of GMO-related DNA and proteins can generally be readily measured in feeds, using established analytical methods such as polymerase chain reaction and immuno-assays, respectively. Various technical challenges remain, such as the simultaneous detection of multiple GMOs and the identification of unauthorized GMOs for which incomplete data on the inserted DNA may exist. Given that transfer of specific GMO-related DNA or protein from consumed feed to the animal had seldom been observed, this cannot serve as an indicator of the individual animal's prior exposure to GM feeds. To explore whether common practices, information exchange and the specific GM feed traceability system in the EU would allow to record GM feed consumption, the dairy chain in Catalonia, where GM maize is widely grown, was taken as an example. It was thus found that this system would neither enable determination of an animal's consumption of specific GM crops, nor would it allow for quantitation of the exposure.

Successful detection of foreign inserts in transgenic rice TT51-1 (BT63) by RNA-sequencing combined with PCR

BACKGROUND

As event-specific sequence information for most unauthorised genetically modified organisms (GMOs) is currently still unavailable, detecting unauthorised GMOs remains challenging. Here, we used insect-resistant rice TT51-1 as an example to develop a novel approach via detecting GMOs by RNA-seq (sequencing) and PCR. RNA-seq of TT51-1 generated 4.8 million (M) 21-nt cDNA tags. Alignment to the Oryza sativa subsp. japonica reference genome revealed 24 098 unmapped tags. Foreign tags from the nopaline synthetic enzyme gene (NOS) terminator and insect-resistant genes were then identified by searching against the NCBI VecScreen and NT databases.

RESULTS

To further isolate foreign DNA sequences, putative NOS terminator and insect-resistant gene tags were combined and used directly as primer pairs for long-range PCR, producing a 5016-bp fragment. The inserted DNA sequence of TT51-1 has been submitted to a database, and thus, similarity analysis using the database could identify a test sample.

CONCLUSION

The novel approach has a great potential for application to the detection and identification of unauthorised GMOs in food and feed products. © 2016 Society of Chemical Industry.

A temperature-tolerant multiplex elements and genes screening system for genetically modified organisms based on dual priming oligonucleotide primers and capillary electrophoresis

High throughput screening systems are the preferred solution to meet the urgent requirement of increasing number of genetically modified organisms (GMOs). In this study, we have successfully developed a multiplex GMO element screening system with dual priming oligonucleotide (DPO) primers. This system can detect the cauliflower mosaic virus 35S (CaMV 35S), terminator of nopaline synthase gene (NOS), figwort mosaic virus 35S (FMV 35S) promoter, neomycin phosphotransferaseII (NPTII), Bt Cry 1Ab, phosphinothricin acetyltransferase genes (bar) and Streptomyces viridochromogenes (pat) simultaneously, which covers more than 90% of all authorized GMO species worldwide. This system exhibits a high tolerance to annealing temperatures, high specificity and a limit of detection equal to conventional PCR. A total of 214 samples from markets, national entry-exit agencies, the Institute for Reference Materials and Measurement (IRMM) and the American Oil Chemists' Society (AOCS) were also tested for applicability. This screening system is therefore suitable for GMO screening.

Development and Validation of a Fluorescent Multiplexed Immunoassay for Measurement of Transgenic Proteins in Cotton (Gossypium hirsutum)

In order to provide farmers with better and more customized alternatives to improve yields, combining multiple genetically modified (GM) traits into a single product (called stacked trait crops) is becoming prevalent. Trait protein expression levels are used to characterize new GM products and establish exposure limits, two important components of safety assessment. Developing a multiplexed immunoassay capable of measuring all trait proteins in the same sample allows for higher sample throughput and savings in both time and expense. Fluorescent (bead-based) multiplexed immunoassays (FMI) have gained wide acceptance in mammalian research and in clinical applications. In order to facilitate the measurement of stacked GM traits, we have developed and validated an FMI assay that can measure five different proteins (β-glucuronidase, neomycin phosphotransferase II, Cry1Ac, Cry2Ab2, and CP4 5-enolpyruvyl-shikimate-3-phosphate synthase) present in cotton leaf from a stacked trait product. Expression levels of the five proteins determined by FMI in cotton leaf tissues have been evaluated relative to expression levels determined by enzyme-linked immunosorbent assays (ELISAs) of the individual proteins and shown to be comparable. The FMI met characterization requirements similar to those used for ELISA. Therefore, it is reasonable to conclude that FMI results are equivalent to those determined by conventional individual ELISAs to measure GM protein expression levels in stacked trait products but with significantly higher throughput, reduced time, and more efficient use of resources.

A Novel Pretreatment-Free Duplex Chamber Digital PCR Detection System for the Absolute Quantitation of GMO Samples

Digital polymerase chain reaction (PCR) has developed rapidly since it was first reported in the 1990s. However, pretreatments are often required during preparation for digital PCR, which can increase operation error. The single-plex amplification of both the target and reference genes may cause uncertainties due to the different reaction volumes and the matrix effect. In the current study, a quantitative detection system based on the pretreatment-free duplex chamber digital PCR was developed. The dynamic range, limit of quantitation (LOQ), sensitivity and specificity were evaluated taking the GA21 event as the experimental object. Moreover, to determine the factors that may influence the stability of the duplex system, we evaluated whether the pretreatments, the primary and secondary structures of the probes and the SNP effect influence the detection. The results showed that the LOQ was 0.5% and the sensitivity was 0.1%. We also found that genome digestion and single nucleotide polymorphism (SNP) sites affect the detection results, whereas the unspecific hybridization within different probes had little side effect. This indicated that the detection system was suited for both chamber-based and droplet-based digital PCR. In conclusion, we have provided a simple and flexible way of achieving absolute quantitation for genetically modified organism (GMO) genome samples using commercial digital PCR detection systems.

Assessment of a direct hybridization microarray strategy for comprehensive monitoring of genetically modified organisms (GMOs)

Detection of GMO material in crop and food samples is the primary step in GMO monitoring and regulation, with the increasing number of GM events in the world market requiring detection solutions with high multiplexing capacity. In this study, we test the suitability of a high-density oligonucleotide microarray platform for direct, quantitative detection of GMOs found in the Turkish feed market. We tested 1830 different 60nt probes designed to cover the GM cassettes from 12 different GM cultivars (3 soya, 9 maize), as well as plant species-specific and contamination controls, and developed a data analysis method aiming to provide maximum throughput and sensitivity. The system was able specifically to identify each cultivar, and in 10/12 cases was sensitive enough to detect GMO DNA at concentrations of ⩽1%. These GMOs could also be quantified using the microarray, as their fluorescence signals increased linearly with GMO concentration.

A highly sensitive and specific method for the screening detection of genetically modified organisms based on digital PCR without pretreatment

Digital PCR has developed rapidly since it was first reported in the 1990s. It was recently reported that an improved method facilitated the detection of genetically modified organisms (GMOs). However, to use this improved method, the samples must be pretreated, which could introduce inaccuracy into the results. In our study, we explored a pretreatment-free digital PCR detection method for the screening for GMOs. We chose the CaMV35s promoter and the NOS terminator as the templates in our assay. To determine the specificity of our method, 9 events of GMOs were collected, including MON810, MON863, TC1507, MIR604, MIR162, GA21, T25, NK603 and Bt176. Moreover, the sensitivity, intra-laboratory and inter-laboratory reproducibility of our detection method were assessed. The results showed that the limit of detection of our method was 0.1%, which was lower than the labeling threshold level of the EU. The specificity and stability among the 9 events were consistent, respectively. The intra-laboratory and inter-laboratory reproducibility were both good. Finally, the perfect fitness for the detection of eight double-blind samples indicated the good practicability of our method. In conclusion, the method in our study would allow more sensitive, specific and stable screening detection of the GMO content of international trading products.

New multiplex PCR methods for rapid screening of genetically modified organisms in foods

We present novel multiplex PCR methods for rapid and reliable screening of genetically modified organisms (GMOs). New designed PCR primers targeting four frequently used GMO specific sequences permitted identification of new DNA markers, in particular 141 bp fragment of cauliflower mosaic virus (CaMV) 35S promoter, 224 bp fragment of Agrobacterium tumefaciens nopaline synthase (NOS) terminator, 256 bp fragment of 5-enolppyruvylshikimate-phosphate synthase (epsps) gene and 258 bp fragment of Cry1Ab delta-endotoxin (cry1Ab) gene for GMO screening. The certified reference materials containing Roundup Ready soybean (RRS) and maize MON 810 were applied for the development and optimization of uniplex and multiplex PCR systems. Evaluation of amplification products by agarose gel electrophoresis using negative and positive controls confirmed high specificity and sensitivity at 0.1% GMO for both RRS and MON 810. The fourplex PCR was developed and optimized that allows simultaneous detection of three common transgenic elements, such as: CaMV 35S promoter, NOS terminator, epsps gene together with soybean-specific lectin gene. The triplex PCR developed enables simultaneous identification of transgenic elements, such as: 35S promoter and cry1Ab gene together with maize zein gene. The analysis of different processed foods demonstrated that multiplex PCR methods developed in this study are useful for accurate and fast screening of GM food products.

International ring trial for the validation of an event-specific Golden Rice 2 quantitative real-time polymerase chain reaction method

This article describes the international validation of the quantitative real-time polymerase chain reaction (PCR) detection method for Golden Rice 2. The method consists of a taxon-specific assay amplifying a fragment of rice Phospholipase D α2 gene, and an event-specific assay designed on the 3' junction between transgenic insert and plant DNA. We validated the two assays independently, with absolute quantification, and in combination, with relative quantification, on DNA samples prepared in haploid genome equivalents. We assessed trueness, precision, efficiency, and linearity of the two assays, and the results demonstrate that both the assays independently assessed and the entire method fulfill European and international requirements for methods for genetically modified organism (GMO) testing, within the dynamic range tested. The homogeneity of the results of the collaborative trial between Europe and Asia is a good indicator of the robustness of the method.

Development, optimization, and single laboratory validation of an event-specific real-time PCR method for the detection and quantification of Golden Rice 2 using a novel taxon-specific assay

In this study, we developed, optimized, and in-house validated a real-time PCR method for the event-specific detection and quantification of Golden Rice 2, a genetically modified rice with provitamin A in the grain. We optimized and evaluated the performance of the taxon (targeting rice Phospholipase D α2 gene)- and event (targeting the 3' insert-to-plant DNA junction)-specific assays that compose the method as independent modules, using haploid genome equivalents as unit of measurement. We verified the specificity of the two real-time PCR assays and determined their dynamic range, limit of quantification, limit of detection, and robustness. We also confirmed that the taxon-specific DNA sequence is present in single copy in the rice genome and verified its stability of amplification across 132 rice varieties. A relative quantification experiment evidenced the correct performance of the two assays when used in combination.

Detection of GM soybean by multiplex-touchdown PCR-microchip capillary electrophoresis with response surface methodology optimization

The combination of the molecular technique, the multivariate strategy and microchip capillary electrophoresis (MCE) was applied to rapid and sensitive analysis of genetically modified (GM) soybean in food samples. A multiplex-touchdown polymerase chain reaction (PCR) system was developed for simultaneously amplifying three target sequences in Roundup Ready soybean (RRS). Response surface methodology was introduced to determine the optimal separation condition in MCE with good resolution and short analytical time. The detection of the PCR products of RRS was completed within 4 min under the optimal conditions. The specificity of the method was evaluated by testing non-GM soybean materials and three GM maize varieties (MON810, Bt176 and Bt11). A sensitivity of 0.1% GM organisms content was obtained, which was remarkably lower than the labeling threshold for transgenic food defined as 0.9% in the European regulation. The relative standard deviation of migration time was in the range of 0.17-0.95%. The proposed method was rapid, sensitive and specific and can be used to identify and detect GM soybean in food samples.

Development and validation of a 48-target analytical method for high-throughput monitoring of genetically modified organisms

The rapid increase in the number of genetically modified (GM) varieties has led to a demand for high-throughput methods to detect genetically modified organisms (GMOs). We describe a new dynamic array-based high throughput method to simultaneously detect 48 targets in 48 samples on a Fludigm system. The test targets included species-specific genes, common screening elements, most of the Chinese-approved GM events, and several unapproved events. The 48 TaqMan assays successfully amplified products from both single-event samples and complex samples with a GMO DNA amount of 0.05 ng, and displayed high specificity. To improve the sensitivity of detection, a preamplification step for 48 pooled targets was added to enrich the amount of template before performing dynamic chip assays. This dynamic chip-based method allowed the synchronous high-throughput detection of multiple targets in multiple samples. Thus, it represents an efficient, qualitative method for GMO multi-detection.

GMO quantification: valuable experience and insights for the future

Cultivation and marketing of genetically modified organisms (GMOs) have been unevenly adopted worldwide. To facilitate international trade and to provide information to consumers, labelling requirements have been set up in many countries. Quantitative real-time polymerase chain reaction (qPCR) is currently the method of choice for detection, identification and quantification of GMOs. This has been critically assessed and the requirements for the method performance have been set. Nevertheless, there are challenges that should still be highlighted, such as measuring the quantity and quality of DNA, and determining the qPCR efficiency, possible sequence mismatches, characteristics of taxon-specific genes and appropriate units of measurement, as these remain potential sources of measurement uncertainty. To overcome these problems and to cope with the continuous increase in the number and variety of GMOs, new approaches are needed. Statistical strategies of quantification have already been proposed and expanded with the development of digital PCR. The first attempts have been made to use new generation sequencing also for quantitative purposes, although accurate quantification of the contents of GMOs using this technology is still a challenge for the future, and especially for mixed samples. New approaches are needed also for the quantification of stacks, and for potential quantification of organisms produced by new plant breeding techniques.

Multitarget real-time PCR-based system: monitoring for unauthorized genetically modified events in India

A multitarget TaqMan real-time PCR (RTi-PCR) based system was developed to monitor unauthorized genetically modified (GM) events in India. Most of the GM events included in this study are either authorized for commercial cultivation or field trials, which were indigenously developed or imported for research purposes. The developed system consists of a 96-well prespotted plate with lyophilized primers and probes, for simultaneous detection of 47 targets in duplicate, including 21 event-specific sequences, 5 construct regions, 15 for transgenic elements, and 6 taxon-specific targets for cotton, eggplant, maize, potato, rice, and soybean. Limit of detection (LOD) of assays ranged from 0.1 to 0.01% GM content for different targets. Applicability, robustness, and practical utility of the developed system were verified with stacked GM cotton event, powdered samples of proficiency testing and two unknown test samples. This user-friendly multitarget approach can be efficiently utilized for monitoring the unauthorized GM events in an Indian context.

The LabTube - a novel microfluidic platform for assay automation in laboratory centrifuges

Assay automation is the key for successful transformation of modern biotechnology into routine workflows. Yet, it requires considerable investment in processing devices and auxiliary infrastructure, which is not cost-efficient for laboratories with low or medium sample throughput or point-of-care testing. To close this gap, we present the LabTube platform, which is based on assay specific disposable cartridges for processing in laboratory centrifuges. LabTube cartridges comprise interfaces for sample loading and downstream applications and fluidic unit operations for release of prestored reagents, mixing, and solid phase extraction. Process control is achieved by a centrifugally-actuated ballpen mechanism. To demonstrate the workflow and functionality of the LabTube platform, we show two LabTube automated sample preparation assays from laboratory routines: DNA extractions from whole blood and purification of His-tagged proteins. Equal DNA and protein yields were observed compared to manual reference runs, while LabTube automation could significantly reduce the hands-on-time to one minute per extraction.

Detecting authorized and unauthorized genetically modified organisms containing vip3A by real-time PCR and next-generation sequencing

The growing number of biotech crops with novel genetic elements increasingly complicates the detection of genetically modified organisms (GMOs) in food and feed samples using conventional screening methods. Unauthorized GMOs (UGMOs) in food and feed are currently identified through combining GMO element screening with sequencing the DNA flanking these elements. In this study, a specific and sensitive qPCR assay was developed for vip3A element detection based on the vip3Aa20 coding sequences of the recently marketed MIR162 maize and COT102 cotton. Furthermore, SiteFinding-PCR in combination with Sanger, Illumina or Pacific BioSciences (PacBio) sequencing was performed targeting the flanking DNA of the vip3Aa20 element in MIR162. De novo assembly and Basic Local Alignment Search Tool searches were used to mimic UGMO identification. PacBio data resulted in relatively long contigs in the upstream (1,326 nucleotides (nt); 95 % identity) and downstream (1,135 nt; 92 % identity) regions, whereas Illumina data resulted in two smaller contigs of 858 and 1,038 nt with higher sequence identity (>99 % identity). Both approaches outperformed Sanger sequencing, underlining the potential for next-generation sequencing in UGMO identification.

A high-throughput method for GMO multi-detection using a microfluidic dynamic array

The ever-increasing production of genetically modified crops generates a demand for high-throughput DNA-based methods for the enforcement of genetically modified organisms (GMO) labelling requirements. The application of standard real-time PCR will become increasingly costly with the growth of the number of GMOs that is potentially present in an individual sample. The present work presents the results of an innovative approach in genetically modified crops analysis by DNA based methods, which is the use of a microfluidic dynamic array as a high throughput multi-detection system. In order to evaluate the system, six test samples with an increasing degree of complexity were prepared, preamplified and subsequently analysed in the Fluidigm system. Twenty-eight assays targeting different DNA elements, GM events and species-specific reference genes were used in the experiment. The large majority of the assays tested presented expected results. The power of low level detection was assessed and elements present at concentrations as low as 0.06 % were successfully detected. The approach proposed in this work presents the Fluidigm system as a suitable and promising platform for GMO multi-detection.

Development of direct real-time PCR system applicable to a wide range of foods and agricultural products

To improve the efficiency of DNA analysis of foods and agricultural products, we investigated a direct real-time PCR based on the real-time monitoring of DNA amplification directly from crude cell lysates of analytical samples. We established a direct real-time PCR system comprising sample pretreatment with a specified lysis buffer and real-time PCR using the developed master mix reagent. No PCR inhibition was observed in the analysis of crude cell lysates from 50 types of samples, indicating that the direct real-time PCR system is applicable to a wide range of materials. The specificity of the direct real-time PCR was evaluated by means of a model assay system for single nucleotide discrimination. Even when crude cell lysates coexisted in the reaction mixtures, the primer selectivity was not affected, suggesting that the sequence specificity of the direct real-time PCR was equivalent to that of PCR from purified DNA templates. We evaluated the sensitivity and quantitative performance of the direct real-time PCR using soybean flour samples including various amounts of genetically modified organisms. The results clearly showed that the direct real-time PCR system provides sensitive detection and precise quantitation.

Practical experiences with an extended screening strategy for genetically modified organisms (GMOs) in real-life samples

Nowadays most animal feed products imported into Europe have a GMO (genetically modified organism) label. This means that they contain European Union (EU)-authorized GMOs. For enforcement of these labeling requirements, it is necessary, with the rising number of EU-authorized GMOs, to perform an increasing number of analyses. In addition to this, it is necessary to test products for the potential presence of EU-unauthorized GMOs. Analysis for EU-authorized and -unauthorized GMOs in animal feed has thus become laborious and expensive. Initial screening steps may reduce the number of GMO identification methods that need to be applied, but with the increasing diversity also screening with GMO elements has become more complex. For the present study, the application of an informative detailed 24-element screening and subsequent identification strategy was applied in 50 animal feed samples. Almost all feed samples were labeled as containing GMO-derived materials. The main goal of the study was therefore to investigate if a detailed screening strategy would reduce the number of subsequent identification analyses. An additional goal was to test the samples in this way for the potential presence of EU-unauthorized GMOs. Finally, to test the robustness of the approach, eight of the samples were tested in a concise interlaboratory study. No significant differences were found between the results of the two laboratories.

Development and validation of real-time PCR screening methods for detection of cry1A.105 and cry2Ab2 genes in genetically modified organisms

Primers and probes were developed for the element-specific detection of cry1A.105 and cry2Ab2 genes, based on their DNA sequence as present in GM maize MON89034. Cry genes are present in many genetically modified (GM) plants and they are important targets for developing GMO element-specific detection methods. Element-specific methods can be of use to screen for the presence of GMOs in food and feed supply chains. Moreover, a combination of GMO elements may indicate the potential presence of unapproved GMOs (UGMs). Primer-probe combinations were evaluated in terms of specificity, efficiency and limit of detection. Except for specificity, the complete experiment was performed in 9 PCR runs, on 9 different days and by testing 8 DNA concentrations. The results showed a high specificity and efficiency for cry1A.105 and cry2Ab2 detection. The limit of detection was between 0.05 and 0.01 ng DNA per PCR reaction for both assays. These data confirm the applicability of these new primer-probe combinations for element detection that can contribute to the screening for GM and UGM crops in food and feed samples.