Determination of Triazole Fungicides in Liquid Samples Using Ultrasound-Assisted Emulsification Microextraction with Solidification of Floating Organic Droplet Followed by High-Performance Liquid Chromatography

Triazoles in the environment: An update on sample pretreatment and analysis methods

Triazoles, due to their high bactericidal performance, have been widely used in the agricultural, clinical, and chemical industry. However, triazoles have been proven to cause endocrine-toxic and organ impairment in humans as a potentially toxic substance. Besides, because of the improper use and difficulty of degradation, triazoles pesticide residues left in the environment could pose a threat to the environment. Therefore, the rapid, reliable, accurate, and high-sensitivity triazoles analysis methods are significantly essential to effectively monitor their presence in various samples and safeguard human health. This review aims to summarize and update the progress of the pretreatment and analytical methods of triazole fungicides in environmental samples from 2012 to 2024. Common pretreatment methods used to extract and purify targets include simple steps (e.g., protein precipitation and coated blade spray), liquid-liquid extraction, solid-phase extraction, and various microextraction methods such as liquid-phase microextraction and solid-phase microextraction, among others. Detection methods mainly include liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry, supercritical fluid chromatography, sensing methods, and capillary electrophoresis. In addition, we elaborate and compare the advantages and disadvantages of different pretreatment and analytical methods, and their development prospects are discussed.

Easy and fast synthesis of MnCo-LDH yolk-shell spheres porous composites applied electrospinning nanofibers highly effective for extracting triazole fungicides

Today, the wide utilization of triazole fungicides due to environmental damage and its side effects has raised global concern. Thus, in this investigation, polyacrylonitrile/MnCo-layered double hydroxides nanofiber was synthesized and applied as an effective and novel adsorbent at thin-film solid-phase micro-extraction technique for the quick and concurrent extraction of five triazole fungicides in fruit and vegetable samples before quantitative analysis by high-performance liquid chromatography-ultraviolet. The incorporation of MnCo-layered double hydroxides with porous structure and abundant functional groups in a polymer medium improves the extraction efficiency of nanofibers owing to hydrogen bonding and π-π interactions formed between analytes and synthesized nano-adsorbent. Various important elements that affect the extraction efficiency of the intended analytes were optimized using a time-variable approach. Under the optimum conditions, the limit of detection and quantification range from 0.1 to 0.15 and 0.3-0.5 ng mL-1, respectively.

An effervescence-assisted switchable deep eutectic solvent based liquid-phase microextraction of triazole fungicides in drinking water and beverage

A new effervescence-assisted switchable deep eutectic solvent-based liquid phase microextraction (EA-SDES-LPME) combined with HPLC-UV was developed for determination of common triazole fungicides in drinking water and beverages, including myclobutanil, flusilazole, hexaconazole and bitertanol. The alternative extraction solvent was prepared with hexafluoroisopropanol and dipropylamine with the merits of time-saving, easy to collect and cost-effectiveness. The SDES can be reversibly switched between hydrophilic and hydrophobic states by pH adjustment. The homogeneous extraction was achieved under the hydrophilic form of SDES, and the bi-phase separation was obtained easily by adjusting pH value to restore the original hydrophobicity. Moreover, the characterization of SDES was investigated by FTIR and 1H NMR. The main variables affecting extraction efficiency were optimized in detail. Under the optimal conditions, the proposed method shows desirable precision (RSDs less than 18.5%) and acceptable recovery (72.6-95.4%). The lower limits of detection and limits of quantitation were found to be in the range of 1-2 μg L-1 and 5-10 μg L-1, respectively. The formation mechanism of SDES and the extraction mechanism for target analytes were investigated by density functional theory. The proposed methodology was simplicity, sensitive, time-saving and successfully applied to determine triazole fungicides in drinking water and beverages, making it an alternative technique for the analysis of trace analytes with satisfactory sensitivity.

An In Situ Formation of Ionic Liquid for Enrichment of Triazole Fungicides in Food Applications Followed by HPLC Determination

An in situ formation of ionic liquid was used for preconcentration of four triazole fungicides in food samples. The microextraction method was used for the first time in the literature for preconcentration of triazole fungicides. In the developed method, tributylhexadecylphosphonium bromide ([P₄₄₄₁₂]Br) and potassium hexafluorophosphate (KPF₆) were used for the formation of hydrophobic ionic liquid. After centrifugation, the fine microdroplets were produced in one step, providing the extraction step in a quick and environmentally friendly manner. The functional group of the hydrophobic ionic liquid was investigated using FT-IR. Various extraction parameters were studied and optimized. In the extraction method, 0.01 g of [P₄₄₄₁₂]Br and 0.01 g of KPF₆, centrifugation at 4500 rpm for 10 min were used. The optimized technique provided a good linear range (90-1000 μg L^-1) and high extraction recovery, with a low limit of detection (30-50 μg L^-1). Methods for the proposed in situ formation of ionic liquid were successfully applied to honey, fruit juice, and egg matrices. The recoveries were obtained in a satisfactory range of 62-112%. The results confirmed the suitability of the proposed microextraction method for selective extraction and quantification of triazole fungicides.

Evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets for the determination of triazole fungicides in water samples by high-performance liquid chromatography

A simple, rapid, and effective analytical procedure for determining three triazole fungicides (myclobutanil, epoxiconazole, and tebuconazole) in water samples is developed by high-performance liquid chromatography-diode array detection after evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets. The extraction procedure involves the sequential addition of the extraction solvent 1-dodecanol (low density), volatile solvent dichloromethane (high density), and calcium oxide to the aqueous sample (the latter reacting exothermically). The CaO reaction can promote the volatilization of the dichloromethane which disperses the 1-dodecanol as fine droplets in the aqueous sample due to the bubbles generated. Therefore, a dispersive solvent is not required. Then, the floating 1-dodecanol is solidified using an ice bath for easy separation from the sample. The variables (the volumes of extraction and volatile solvents, amounts of calcium oxide and sodium chloride, pH values, and extraction time) in the extraction procedure are further optimized. Under optimized conditions, the linearity ranges are 0.05-5 μg mL^-1 with correlation coefficients greater than 0.99. The limits of detection and quantification are 0.0051-0.0090 μg mL^-1 and 0.0169-0.0299 μg mL^-1, respectively. The recoveries of myclobutanil, epoxiconazole, and tebuconazole in tap, reservoir, and river water range between 77.6% and 104.4% with relative standard deviations ranging from 0.6% to 7.8%. Hence, the method was reliable for analysis of myclobutanil, epoxiconazole, and tebuconazole in water samples.

Supramolecular Fluorescence Probe Based on Twisted Cucurbit[14]uril for Sensing Fungicide Flusilazole

The host-guest complex of the common dye, thioflavin T (ThT), and twisted cucurbit[14]uril (tQ[14]) was selected as a fluorescent probe to determine non-fluorescent triazole fungicides, including flusilazole, azaconazole, triadimefon, tebuconazole, tricyclazole, flutriafol, penconazole, and triadimenol isomer A, in an aqueous solution. The experimental results reveal that the ThT@tQ[14] probe selectively responded to flusilazole with significant fluorescence quenching and a detection limit of 1.27 × 10^-8 mol/L. In addition, the response mechanism involves not only a cooperation interaction-ThT occupies a side-cavity of the tQ[14] host and the triazole fungicide occupies another side-cavity of the tQ[14] host-but also a competition interaction in which both ThT and the triazole fungicide occupy the side-cavities of the tQ[14] host.

Large volume of water samples introduced in dispersive liquid-liquid microextraction for the determination of 15 triazole fungicides by gas chromatography-tandem mass spectrometry

A novel method of large volume of water samples directly introduced in dispersive liquid-liquid microextraction was developed, which is based on ultrasound/manual shaking-synergy-assisted emulsification and self-generating carbon dioxide gas (CO2) breaking down the emulsion for the determination of 15 triazole fungicides by gas chromatography-tandem mass spectrometry. This technique makes low-density extraction solvent toluene (180 μL) dissolve in 200 mL of samples containing 0.05 mol L(-1) of HCl and 5 % of NaCl (w/v) to form a well emulsion by synergy of ultrasound and manual shaking, and injects NaHCO3 solution (1.0 mol L(-1)) to generate CO2 achieving phase separation with the assistance of ultrasound. The entire process is accomplished within 8 min. The injection of NaHCO3 to generate CO2 achieves phase separation that breaks through the centrifugation limited large volume aqueous samples. In addition, the device could be easily cleaned, and this kind of vessel could be reconfigured for any volume of samples. Under optimal conditions, the low limits of detection ranging from 0.7 to 51.7 ng L(-1), wide linearity, and enrichment factors obtained were in the range 924-3669 for different triazole fungicides. Southern end of the Beijing-Hangzhou Grand Canal water (Hangzhou, China) was used to verify the applicability of the developed method. Graphical Abstract Flow chart of ultrasound/manual shaking-synergy-assisted emulsification and self-generating carbon dioxide gas breaking down the emulsion.

Ultrasound-assisted emulsification microextraction coupled with high-performance liquid chromatography for the simultaneous determination of fragrance allergens in cosmetics and water

A simple, inexpensive, and environmentally friendly method based on ultrasound-assisted emulsification microextraction followed by solidification of floating organic drop and high-performance liquid chromatography coupled to diode array detection was developed for the simultaneous determination of 18 potentially allergenic fragrance substances. Several parameters affecting the microextraction process were investigated in detail by the "one-variable-at-a-time" approach. Optimal conditions were the following: 50 μL of 2-dodecanol as extraction solvent, 10 mL of sample containing 150 g/L of salt, and 5 min of sonication at 35°C. Under the optimized conditions, method showed good linearity in the selected ranges, with squared correlation coefficients ranging from 0.948 to 0.999. Limits of detection ranged from 0.001 to 0.154 μg/mL and enrichment factors from 9 to 237. Precision of the method, expressed as relative standard deviation, was checked at two levels obtaining good results (3.3-14.4%). Recovery studies were made in baby bath water and in eau de cologne showing acceptable accuracy. Finally, the developed method was successfully applied to different commercial cosmetic and water samples. The most commonly found analyte was linalool followed by cinnamal and lilial. Most of the analyzed samples contained at least one of the target compounds.

Supramolecular solvent microextraction of gold prior to its determination by microsample injection system coupled with flame atomic absorption spectrometry

A supramolecular solvent based liquid–liquid microextraction (SsLLME) system for gold was developed prior to its determination by a microsample injection system coupled with flame atomic absorption spectrometric (MS-FAAS).