Development and evaluation of pH-dependent interpenetrating network of acrylic acid/polyvinyl alcohol

Investigation of bioprintable modified agar-based hydrogels with antimicrobial properties

Due to the numerous dangers arising from excessive use of antibiotics in treatments, researchers have been searching for natural alternatives to conventional antibiotics. Despite the popularity of plant extracts, essential oils, and their derivatives in herbal medicine, their applications in novel therapies are rather limited. This paper tries to open a new possibility for infection treatments by assessing the suitability of antimicrobial hydrogels as bioinks. Antimicrobial activity against S. epidermidis, P. aeruginosa, S. aureus, E. coli of selected extracts and geraniol were investigated. Suitable agent was incorporated into agar-based hydrogel. Physicochemical properties of the obtained compositions were analyzed, including determination of swelling kinetics and key polymer network parameters, contact angle measurements, FTIR spectra analysis, biocompatibility assessment, antimicrobial tests and bioprintability studies. Results confirmed geraniol's superior antimicrobial activity in pure form and in hydrogels. The obtained materials showed high swelling capacity, satisfying extrusion processability, shape fidelity, and great biocompatibility in their unmodified state. Nevertheless, modification with geraniol caused a significant decrease of cell viability, which limits their usage as bioinks in current form, due to the cytotoxic effect on cells. To improve cells interactions, studies on materials with geraniol and other agents with similar mechanism should be conducted in the future.

Therapeutic efficacy of Strobilanthes urticifolia-infused pectin/polyacrylic acid hydrogel for targeted hepatorenal fibrosis mitigation: A multifaceted biomaterial approach

Pectin/polyacrylic acid (PPAA) hydrogel is a unique and versatile biomaterial with applications in drug delivery, wound healing, tissue engineering, and agriculture, owing to its tailored properties and multifunctional attributes. This study aims to harness the therapeutic potential of Strobilanthes urticifolia extract within a PPAA hydrogel matrix to attenuate liver and kidney fibrosis through targeted and sustained delivery of biologically active substances. PPAA hydrogel was prepared by free radical polymerization, followed by its porosity and swelling determination. The results depicted the porous nature of PPAA hydrogel and improved swelling properties at pH 7.4, confirming its drug delivery promise. The polyphenolic-enriched S. urticifolia extracts of leaf and flower were loaded onto PPAA hydrogel, and the loading efficiency was 87% (leaf) and 62.5% (flower). Moreover, slow-release studies showed controlled and prolonged release of polyphenols for 7 days. The polyphenolic-enriched hydrogel's microstructure was characterized using SEM, FTIR, and thermogravimetric analysis (TGA). SEM results revealed a highly porous structure of polyphenol enriched PPAA hydrogel, while FTIR analysis confirmed the presence of functional groups such as OH group of carboxylic acid, aliphatic CH2 stretching due to acrylic acid grafting with pectin, CO stretching due to acid linkage with pectin, CH of aromatic ring, and CH of carboxylate salt in PPAA hydrogel. TGA of PPAA hydrogel showed its stability up to 488°C. Additionally, the S. urticifolia extract loaded PPAA hydrogel displayed significant antibacterial properties and minimum inhibitory concentrations against both Gram-positive and Gram-negative bacteria. In vivo studies carried out on rats demonstrated that polyphenolic enriched PPAA hydrogel significantly attenuates liver and kidney fibrosis. Therefore, it is concluded from the present study that loading of polyphenolic enriched extract from leaves and flower of S. urticifolia enhanced the biomedical applications of PPAA hydrogel. RESEARCH HIGHLIGHTS: The PPAA hydrogel developed in this study exhibits a highly porous structure and improved swelling properties at physiological pH (7.4), making it an excellent candidate for drug delivery systems. S. urticifolia extracts, rich in polyphenols, were successfully incorporated into the PPAA hydrogel with high loading efficiencies of 87% for leaf and 62.5% for flower extracts. Loading of polyphenolic enriched extracts of S. urticifolia onto PPAA enhanced its biological activities such as antibacterial, hepatoprotective, and reno-protective activities as depicted by in vitro and in vivo studies.

In Vitro and In Vivo Evaluation of Hydroxypropyl-β-cyclodextrin-grafted-poly(acrylic acid)/poly(vinyl pyrrolidone) Semi-Interpenetrating Matrices of Dexamethasone Sodium Phosphate

In this paper, we fabricated semi-interpenetrating polymeric network (semi-IPN) of hydroxypropyl-β-cyclodextrin-grafted-poly(acrylic acid)/poly(vinyl pyrrolidone) (HP-β-CD-g-poly(AA)/PVP) by the free radical polymerization technique, intended for colon specific release of dexamethasone sodium phosphate (DSP). Different proportions of polyvinyl pyrrolidone (PVP), acrylic acid (AA), and hydroxypropyl-beta-cyclodextrin (HP-β-CD) were reacted along with ammonium persulphate (APS) as initiator and methylene-bis-acrylamide (MBA) as crosslinker to develop a hydrogel system with optimum swelling at distal intestinal pH. Initially, all formulations were screened for swelling behavior and AP-8 was chosen as optimum formulation. This formulation was capable of releasing a small amount of drug at acidic pH (1.2), while a maximum amount of drug was released at colonic pH (7.4) by the non-Fickian diffusion mechanism. Fourier transformed infrared spectroscopy (FTIR) revealed successful grafting of components and development of semi-IPN structure without any interaction with DSP. Thermogravimetric analysis (TGA) confirmed the thermal stability of developed semi-IPN. X-ray diffraction (XRD) revealed reduction in crystallinity of DSP upon loading in the hydrogel. The scanning electron microscopic (SEM) images revealed a rough and porous hydrogel surface. The toxicological evaluation of semi-IPN hydrogels confirmed their bio-safety and hemocompatibility. Therefore, the prepared hydrogels were pH sensitive, biocompatible, showed good swelling, mechanical properties, and were efficient in releasing the drug in the colonic environment. Therefore, AP-8 can be deemed as a potential carrier for targeted delivery of DSP to treat inflammatory bowel diseases.

In Vitro and Biological Characterization of Dexamethasone Sodium Phosphate Laden pH-Sensitive and Mucoadhesive Hydroxy Propyl β-Cyclodextrin-g-poly(acrylic acid)/Gelatin Semi-Interpenetrating Networks

The current study reports the fabrication and biological evaluation of hydroxy propyl β-cyclodextrin-g-poly(acrylic acid)/gelatin (HP-β-CD-g-poly(AA)/gelatin) semi-interpenetrating networks (semi-IPN) for colonic delivery of dexamethasone sodium phosphate (DSP). The prepared hydrogels showed pH-dependent swelling and mucoadhesive properties. The mucoadhesive strength of hydrogels increased with an increasing concentration of gelatin. Based on the swelling and mucoadhesive properties, AG-1 was chosen as the optimized formulation (0.33% w/w of gelatin and 16.66% w/w of AA) for further analysis. FTIR revealed the successful development of a polymeric network without any interaction with DSP. SEM images revealed a slightly rough surface after drug loading. Drug distribution at the molecular level was confirmed by XRD. In vitro drug release assay showed pH-dependent release, i.e., a minute amount of DSP was released at a pH of 1.2 while 90.58% was released over 72 h at pH 7.4. The optimized formulation did not show any toxic effects on a rabbit's vital organs and was also hemocompatible, thus confirming the biocompatible nature of the hydrogel. Conclusively, the prepared semi-IPN hydrogel possessed the necessary features, which can be exploited for the colonic delivery of DSP.

Synthesis of novel combinatorial drug delivery system (nCDDS) for co-delivery of 5-fluorouracil and leucovorin calcium for colon targeting and controlled drug release

OBJECTIVE

Purpose of the current study was to improve the oral effectiveness of 5-fluorouracil (5-FU) by developing novel controlled, combinatorial drug delivery system (nCDDS) for co-delivery of 5-FU and leucovorin calcium (LC) for colon targeting.

SIGNIFICANCE

On the basis of results obtained, novel controlled, combinatorial drug delivery system could be an effective strategy for the colon targeting of 5-FU and LC.

METHODS

Free radical polymerization method was tuned and used to fabricate this nCDDS. The nCDDS is synthesized in two steps, first synthesis of 5-FU/LC calcium loaded nanogels and second, pre-synthesized 5-FU and LC loaded nanogels were dispersed in pectin based polymerized matrix hard gel. The nanogels and nCDDS gels were characterized for network structure, thermal stability, and surface morphology. Swelling and in vitro release studies were carried out at different pH 1.2 and 7.4 both for naive nanogels and combined matrix gels. In vivo study of combinatorial gel was performed on rabbits by using HPLC method to estimate plasma drug concentration and pharmacokinetics parameters.

RESULTS

Structure and thermal analysis confirmed the formation of stable polymeric network. SEM of nanogels and combinatorial gels showed that the spongy and rough edges particles and uniformly distributed in the combinatorial gel. The prepared nCDDS showed excellent water loving capacity and pH responsiveness. Combinatorial gel showed excellent characteristic for colonic delivery of drugs, which were confirmed by various in vitro and in vivo characterizations. Acute oral toxicity study of combinatorial gel confirmed the biocompatible and nontoxic characteristics of developed formulation.

CONCLUSION

Conclusively, it can be found that nCDDS showed excellent properties regarding drug targeting in a controllable manner as compared to naive PEGylated nanogels.

Highly Porous pH-Responsive Carboxymethyl Chitosan-Grafted-Poly (Acrylic Acid) Based Smart Hydrogels for 5-Fluorouracil Controlled Delivery and Colon Targeting

In the present investigation, new formulations of CMCS/AA hydrogels with varying composition of Carboxymethyl chitosan, acrylic acid, and ethylene glycol dimethacrylate (EGDMA) were prepared by free radical polymerization technique using benzoyl peroxide as catalyst. The bioavailability of 5-FU through the oral route is very limited owing to its rapid metabolism and clearance from the general circulation. Current work was aimed at increasing the bioavailability of 5-FU via smart hydrogels and at investigating their potential in delivering 5-FU to target colon cancer. Swelling studies were carried out on dried hydrogel discs in different USP phosphate buffer solutions of various pH values. Porosity and gel fraction of all the samples were measured. 5-FU was used as a model drug and loaded in selected hydrogel samples. The amount of drug loaded and released was determined. Experimental data was fitted to various model equations, and corresponding parameters were calculated to study the release mechanism. Many structural parameters were calculated. The prepared hydrogels were also characterized by FTIR and SEM to study the structure, crystallinity, compatibility, and morphology of the smart hydrogels. The biocompatibility and cytotoxic potential blank and drug-loaded hydrogels were assessed through MTT assay. The prepared hydrogels were found to be an excellent carrier for 5-FU in targeting colon cancer.

Synthesis and Characterization of Chemically Cross-Linked Acrylic Acid/Gelatin Hydrogels: Effect of pH and Composition on Swelling and Drug Release

This present work was aimed at synthesizing pH-sensitive cross-linked AA/Gelatin hydrogels by free radical polymerization. Ammonium persulfate and ethylene glycol dimethacrylate (EGDMA) were used as initiator and as cross-linking agent, respectively. Different feed ratios of acrylic acid, gelatin, and EGDMA were used to investigate the effect of monomer, polymer, and degree of cross-linking on swelling and release pattern of the model drug. The swelling behavior of the hydrogel samples was studied in 0.05 M USP phosphate buffer solutions of various pH values pH 1.2, pH 5.5, pH 6.5, and pH 7.5. The prepared samples were evaluated for porosity and sol-gel fraction analysis. Pheniramine maleate used for allergy treatment was loaded as model drug in selected samples. The release study of the drug was investigated in 0.05 M USP phosphate buffer of varying pH values (1.2, 5.5, and 7.5) for 12 hrs. The release data was fitted to various kinetic models to study the release mechanism. Hydrogels were characterized by Fourier transformed infrared (FTIR) spectroscopy which confirmed formation of structure. Surface morphology of unloaded and loaded samples was studied by surface electron microscopy (SEM), which confirmed the distribution of model drug in the gel network.