Boosting Sodium Storage of Fe1-xS/MoS2 Composite via Heterointerface Engineering

Heterogeneous engineering and carbon confinement strategy to synergistically boost the sodium storage performance of transition metal selenides

Transition metal selenides (TMSs) stand out as a promising anode material for sodium-ion batteries (SIBs) owing to their natural resources and exceptional sodium storage capacity. Despite these advantages, their practical application faces challenges, such as poor electronic conductivity, sluggish reaction kinetics and severe agglomeration during electrochemical reactions, hindering their effective utilization. Herein, the dual-carbon-confined CoSe2/FeSe2@NC@C nanocubes with heterogeneous structure are synthesized using ZIF-67 as the template by ion exchange, resorcin-formaldehyde (RF) coating, and subsequent in situ carbonization and selenidation. The N-doped porous carbon promotes rapid electrolyte penetration and minimizes the agglomeration of active materials during charging and discharging, while the RF-derived carbon framework reduces the cycling stress and keeps the integrity of the material structure. More importantly, the built-in electric field at the heterogeneous boundary layer drives electron redistribution, optimizing the electronic structure and enhancing the reaction kinetics of the anode material. Based on this, the nanocubes of CoSe2/FeSe2@NC@C exhibits superb sodium storage performance, delivering a high discharge capacity of 512.6 mA h g-1 at 0.5 A g-1 after 150 cycles and giving a discharge capacity of 298.2 mA h g-1 at 10 A g-1 with a CE close to 100.0 % even after 1000 cycles. This study proposes a viable method to synthesize advanced anodes for SIBs by a synergy effect of heterogeneous interfacial engineering and a carbon confinement strategy.

Achieving High-Rate and Stable Sodium-Ion Storage by Constructing Okra-Like NiS2/FeS2@Multichannel Carbon Nanofibers

Transition metal sulfides (TMSs) are considered as promising anode materials for sodium-ion batteries (SIBs) due to their high theoretical capacities. However, the relatively low electrical conductivity, large volume variation, and easy aggregation/pulverization of active materials seriously hinder their practical application. Herein, okra-like NiS2/FeS2 particles encapsulated in multichannel N-doped carbon nanofibers (NiS2/FeS2@MCNFs) are fabricated by a coprecipitation, electrospinning, and carbonization/sulfurization strategy. The combined advantages arising from the hollow multichannel structure in carbon skeleton and heterogeneous NiS2/FeS2 particles with rich interfaces can provide facile ion/electron transfer paths, ensure boosted reaction kinetics, and help maintain the structural integrity, thereby resulting in a high reversible capacity (457 mA h g-1 at 1 A g-1), excellent rate performance (350 mA h g-1 at 5 A g-1), and outstanding long-term cycling stability (93.5% retention after 1100 cycles). This work provides a facile and efficient synthetic strategy to develop TMS-based heterostructured anode materials with high-rate and stable sodium storage properties.

Multiscale Interface Engineering of Sulfur-Doped TiO2 Anode for Ultrafast and Robust Sodium Storage

Sodium-ion batteries (SIBs) are a promising electrochemical energy storage system; however, their practical application is hindered by the sluggish kinetics and interfacial instability of anode-active materials. Here, to circumvent these issues, we proposed the multiscale interface engineering of S-doped TiO2 electrodes with minor sulfur/carbon inlaying (S/C@sTiO2), where the electrode-electrolyte interface (SEI) and electrode-current collector interface (ECI) are tuned to improve the Na-storage performance. It is found that the S dopant greatly promotes the Na+ diffusion kinetics. Moreover, the ether electrolyte generates much less NaF in the cycled electrode, but relatively richer NaF in the SEI in comparison to fluoroethylene carbonate-contained ester electrolyte, leading to a thin (9 nm), stable, and kinetically favorable SEI film. More importantly, the minor sodium polysulfide intermediates chemically interact with the Cu current collector to form a Cu2S interface between the electrode and the Cu foil. The conductive tree root-like Cu2S ECI serves not only as active sites to boost the specific capacity but also as a 3D "second current collector" to reinforce the electrode and improve the Na+ reaction kinetics. The synergy of S-doping and optimized SEI and ECI realizes large specific capacity (464.4 mAh g-1 at 0.1 A g-1), ultrahigh rate capability (305.8 mAh g-1 at 50 A g-1), and ultrastable cycling performance (91.5% capacity retention after 3000 cycles at 5 A g-1). To the best of our knowledge, the overall SIB performances of S/C@sTiO2 are the best among all of the TiO2-based electrodes.

Co4S3 Nanoparticles Confined in an MnS Nanorod-Grafted N, S-Codoped Carbon Polyhedron for Highly Efficient Sodium-Ion Batteries

Sodium-ion batteries (SIBs) suffer from limited ion diffusion and structural expansion, generating the urgent demand for Na+ accommodable materials with promising architectures. In this work, the rational exploration for Co4S3 nanoparticles confined in an MnS nanorod-grafted N, S-codoped carbon polyhedron (Co-Mn-S@N-S-C) is achieved by the in situ growth of MOF on MnO2 nanorod along with the subsequent carbonization and sulfurization. Benefiting from the distinctive nanostructure, the Co-Mn-S@N-S-C anode delivers excellent structural stability, resulting in prolonged cycling stability with a capacity retention of 90.2% after 1000 cycles at 2 A g-1. Moreover, the reaction storage mechanism is clarified by the in situ X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements. The results indicate that properly designed electrode materials have huge potential applications for highly efficient energy storage devices.

Interfacial Engineering of MoS2/V2O3@C-rGO Composites with Pseudocapacitance-Enhanced Li/Na-Ion Storage Kinetics

Molybdenum sulfide has been widely investigated as a prospective anode material for Li+/Na+ storage because of its unique layered structure and high theoretical capacity. However, the enormous volume variation and poor conductivity limit the development of molybdenum sulfide. The rational design of a heterogeneous interface is of great importance to improve the structure stability and electrical conductivity of electrode materials. Herein, a high-temperature mixing method is implemented in the hydrothermal process to synthesize the hybrid structure of MoS2/V2O3@carbon-graphene (MoS2/V2O3@C-rGO). The MoS2/V2O3@C-rGO composites exhibit superior Li+/Na+ storage performance due to the construction of the interface between the MoS2 and V2O3 components and the introduction of carbon materials, delivering a prominent reversible capacity of 564 mAh g-1 at 1 A g-1 after 600 cycles for lithium-ion batteries and 376.3 mAh g-1 at 1 A g-1 after 450 cycles for sodium-ion batteries. Theoretical calculations confirm that the construction of the interface between the MoS2 and V2O3 components can accelerate the reaction kinetics and enhance the charge-ionic transport of molybdenum sulfide. The results illustrate that interfacial engineering may be an effective guide to obtain high-performance electrode materials for Li+/Na+ storage.

Interface ion-exchange strategy of MXene@FeIn2S4 hetero-structure for super sodium ion half/full batteries

Herein, a well-designed hierarchical architecture of bimetallic transition sulfide FeIn2S4 nanoparticles anchoring on the Ti3C2 MXene flakes has been prepared by cation exchange and subsequent high-temperature sulfidation processes. The introduction of MXene substrate with excellent conductivity not only accelerates the migration rate of Na+ to achieve fast reaction dynamics but provides abundant deposition sites for the FeIn2S4 nanoparticles. In addition, this hierarchical structure of MXene@FeIn2S4 can effectively restrain the accumulation of MXene to guarantee the maximized exposure of redox active sites into the electrolyte, and simultaneously relieve the volume expansion in the repeated discharging/charging processes. The MXene@FeIn2S4 displays outstanding rate capability (448.2 mAh g-1 at 5 A g-1) and stable long cycling performance (428.1 mAh g-1 at 2 A g-1 after 200 cycles). Moreover, the Nay-In6S7 phase detected by ex-situ XRD and XPS characterization may be regarded as a "buffer" to maintain the stability of the Fe-based components and enhance the reversibility of the electrochemical reaction. This work confirms the practicability of constructing the hierarchical structure bimetallic sulfides with the promising electrochemical performance.

Unusual Hybrid Magnesium Storage Mechanism in a New Type of Bi2O2CO3 Anode

Bismuth and bismuth-based compounds have been extensively studied as anodes as prospective candidates for rechargeable magnesium batteries (rMBs). However, the unsatisfactory magnesium-storage capability caused by the typical alloying reaction mechanism severely restricts the practical option for anodes in rMBs. Herein, polyaniline intercalated Bi2O2CO3 nanosheets are prepared by an effective interlayer engineering strategy to fine-tune the layer structure of Bi2O2CO3, achieving enhanced magnesium-storage capacity, rate performance, as well as long cycle life. Excitedly, a stepwise insertion-conversion-alloying reaction is aroused to stabilize the performance, which is elucidated by in/ex situ investigations. Moreover, first-principles calculations confirm that the coupling of Bi2O2CO3 and polyaniline not only increases the conductivity induced by the strong density of states and the interior self-built-in electric field but also significantly reduces the energy barrier of Mg shuttles. Our findings shed light on exploring new electrode materials with an appropriate working mechanism toward high-performance rechargeable batteries.

Metal-Organic Assembly Strategy for the Synthesis of Layered Metal Chalcogenide Anodes for Na+ /K+ -Ion Batteries

Layered transition metal chalcogenides (MX, M=Mo, W, Sn, V; X=S, Se, Te) have large ion transport channels and high specific capacity, making them promising for large-sized Na⁺ /K⁺ energy-storage technologies. Nevertheless, slow reaction kinetics and huge volume expansion will induce an undesirable electrochemical performance. Numerous efforts have been devoted to designing MX anodes and enhancing their electrochemical performance. Based on the metal-organic assembly strategy, nanostructural engineering, combination with carbon materials, and component regulation can be easily realized, which effectively boost the performance of MX anodes. In this Review, we present a comprehensive overview on the synthesis of MX nanostructure using the metal-organic assembly strategy, which can realize the design of MX nanostructures, based on self-sacrificial templates, host@guest tailored templates, post-modified layer and derivative templates. The preparation routes and structure evolution are mainly discussed. Then, Mo-, W-, Sn-, V-based chalcogenides used for Na⁺ /K⁺ energy storage are reviewed, and the relationship between the structure and the electrochemical performance, as well as the energy storage mechanism are emphasized. In addition, existing challenges and future perspectives are also presented.

Interface Engineering of Fe7S8/FeS2 Heterostructure in situ Encapsulated into Nitrogen-Doped Carbon Nanotubes for High Power Sodium-Ion Batteries

Heterostructure engineering combined with carbonaceous materials shows great promise toward promoting sluggish kinetics, improving electronic conductivity, and mitigating the huge expansion of transition metal sulfide electrodes for high-performance sodium storage. Herein, the iron sulfide-based heterostructures in situ hybridized with nitrogen-doped carbon nanotubes (Fe7S8/FeS2/NCNT) have been prepared through a successive pyrolysis and sulfidation approach. The Fe7S8/FeS2/NCNT heterostructure delivered a high reversible capacity of 403.2 mAh g-1 up to 100 cycles at 1.0 A g-1 and superior rate capability (273.4 mAh g-1 at 20.0 A g-1) in ester-based electrolyte. Meanwhile, the electrodes also demonstrated long-term cycling stability (466.7 mAh g-1 after 1,000 cycles at 5.0 A g-1) and outstanding rate capability (536.5 mAh g-1 at 20.0 A g-1) in ether-based electrolyte. This outstanding performance could be mainly attributed to the fast sodium-ion diffusion kinetics, high capacitive contribution, and convenient interfacial dynamics in ether-based electrolyte.

Interface Density Engineering on Heterogeneous Molybdenum Dichalcogenides Enabling Highly Efficient Hydrogen Evolution Catalysis and Sodium Ion Storage

Constructing active heterointerfaces is powerful to enhance the electrochemical performances of transition metal dichalcogenides, but the interface density regulation remains a huge challenge. Herein, MoO₂ /MoS₂ heterogeneous nanorods are encapsulated in nitrogen and sulfur co-doped carbon matrix (MoO₂ /MoS₂ @NSC) by controllable sulfidation. MoO₂ and MoS₂ are coupled intimately at atomic level, forming the MoO₂ /MoS₂ heterointerfaces with different distribution density. Strong electronic interactions are triggered at these MoO₂ /MoS₂ heterointerfaces for enhancing electron transfer. In alkaline media, the optimal material exhibits outstanding hydrogen evolution reaction (HER) performances that significantly surpass carbon-covered MoS₂ nanorods counterpart (η₁₀ : 156 mV vs 232 mV) and most of the MoS₂ -based heterostructures reported recently. First-principles calculation deciphers that MoO₂ /MoS₂ heterointerfaces greatly promote water dissociation and hydrogen atom adsorption via the O-Mo-S electronic bridges during HER process. Moreover, benefited from the high pseudocapacitance contribution, abundant "ion reservoir"-like channels, and low Na⁺ diffusion barrier appended by high-density MoO₂ /MoS₂ heterointerfaces, the material delivers high specific capacity of 888 mAh g^-1 , remarkable rate capability and cycling stability of 390 cycles at 0.1 A g^-1 as the anode of sodium ion battery. This work will undoubtedly light the way of interface density engineering for high-performance electrochemical energy conversion and storage systems.

Zero-strain strategy incorporating TaC with Ta2O5 to enhance its rate capacity for long-term lithium storage

Ta2O5 holds great potential for lithium storage due to its high theoretical capacity and long-life cycling. However, it still suffers from an unsatisfactory rate capability because of its low conductivity and significant volume expansion during the charging/discharging process. In this study, a zero-strain strategy was developed to composite Ta2O5 with zero-strain TaC as an anode for lithium-ion batteries (LIBs). The zero-strain TaC, featuring negligible lattice expansion, can alleviate the volume variation of Ta2O5 when cycling, thereby enhancing the rate capacity and long-term cycling stability of the whole electrode. Further, the formation of a heterostructure between Ta2O5 and TaC was confirmed, giving rise to an enhancement in the electrical conductivity and structural stability. As expected, this anode displayed a reversible specific capacity of 395.5 mA h g-1 at 0.5 A g-1 after 500 cycles. Even at an ultrahigh current density of 10 A g-1, the Ta2O5/TaC anode delivered a high capacity of 144 mA h g-1 and superior durability with a low-capacity decay rate of 0.08% per cycle after 1000 cycles. This zero-strain strategy provides a promising avenue for the rational design of anodes, sequentially contributing to the development of high-rate capacity and long cycling LIBs.

Recent Advances on Heterojunction-Type Anode Materials for Lithium-/Sodium-Ion Batteries

Rechargeable batteries are key in the field of electrochemical energy storage, and the development of advanced electrode materials is essential to meet the increasing demand of electrochemical energy storage devices with higher density of energy and power. Anode materials are the key components of batteries. However, the anode materials still suffer from several challenges such as low rate capability and poor cycling stability, limiting the development of high-energy and high-power batteries. In recent years, heterojunctions have received increasing attention from researchers as an emerging material, because the constructed heterostructures can significantly improve the rate capability and cycling stability of the materials. Although many research progress has been made in this field, it still lacks review articles that summarize this field in detail. Herein, this review presents the recent research progress of heterojunction-type anode materials, focusing on the application of various types of heterojunctions in lithium/sodium-ion batteries. Finally, the heterojunctions introduced in this review are summarized, and their future development is anticipated.

Expanding the ReS2 Interlayer Promises High-Performance Potassium-Ion Storage

Improving the electrochemical kinetics and the intrinsic poor conductivity of transition metal dichalcogenide (TMD) electrodes is meaningful for developing next-generation energy storage systems. As one of the most promising TMD anode materials, ReS₂ shows attractive performance in potassium-ion batteries (PIBs). To overcome the poor kinetic ion diffusion and limited cycling stability of the ReS₂-based electrode, herein, the interlayer distance expanding strategy was employed, and reduced graphene oxide (rGO) was introduced into ReS₂. Few-layered ReS₂ nanosheets were grown on the surface of the rGO with expanded interlayer distance. The prepared ReS₂ nanosheets show an expanded distance (∼0.77 nm). The synthesized EI-ReS₂@rGO composites were used in PIBs as anode materials. The K-ion storage mechanism of the ReS₂-based anode was investigated by in situ X-ray diffraction (XRD) technology, which shows the intercalation and conversion types. The EI-ReS₂@rGO nanocomposites show high specific capacities of 432.5, 316.5, and 241 mAh g^-1 under 0.05, 0.2, and 1.0 A g^-1 current densities and exhibit excellent reversibility at 1.0 A g^-1. Overall, this strategy, which finely tunes the local chemistry and orbital hybridization for high-performance PIBs, will open up a new field for other materials.

Superstructure MOF as a framework to composite MoS2 with rGO for Li/Na-ion battery storage with high-performance and stability

Metal sulfides, one kind of electrode material with very high theoretical capacity, have been widely studied for use in lithium and sodium ion batteries. However, there are some problems hindering their applications in electrodes, such as low conductivity and volume expansion. The MOF introduces metals with different coordination strengths into an existing MOF structure, which improves the performance of the electrode to a certain extent. In this paper, Fe/Zn bimetallic MOF rod-like superstructure was prepared based on Ostwald theory. Accompanied by sulfuration, the MOF was effectively combined with MoS₂ and GO, and the objective materials Fe₇S₈-C/ZnS-C@MoS₂/rGO composites were successfully prepared. The MOF material provides a good frame and an efficient electron transport path, while the robust rGO wall effectively inhibits the pulverization of materials during the lithium/sodium intercalation/escalation courses. This particular material exhibited excellent cycling and rate capability performance when used in Li/Na-ion batteries. When used in Li-batteries, the electrode material delivered a specific capacity of 1598.3 mA h g^-1 at 0.1 A g^-1 and remained at 1196.7 mA h g^-1 even after about 100 cycles and further exhibited a specific capacity of 368.68 mA h g^-1 at the current rate of 5 A g^-1 even after 1000 cycles, respectively. As for sodium batteries, these electrode materials exhibited an initial reversible capacity of 1053.6 mA h g^-1 at 0.1 A g^-1 and the reversible capacity was still as high as 592.2 mA h g^-1 after 200 cycles. It is perhaps that this composite material with its particular architecture and composition is greatly beneficial for electron transfer and Li/Na ion diffusion. In the repeated physicochemical/nutrifying process, the appropriate distance between adjacent MOFs is of great help in preventing volume changes and thus improving the electrochemical performance.

Ultrafast and Ultrastable Heteroarchitectured Porous Nanocube Anode Composed of CuS/FeS2 Embedded in Nitrogen-Doped Carbon for Use in Sodium-Ion Batteries

The enhancement of the structural stability of conversion-based metal sulfides at high current densities remains a major challenge in realizing the practical application of sodium-ion batteries (SIBs). The instability of metal sulfides is caused by the large volume variation and sluggish reaction kinetics upon sodiation/desodiation. To overcome this, herein, a heterostructured nanocube anode composed of CuS/FeS₂ embedded in nitrogen-doped carbon (CuS/FeS₂ @NC) is synthesized. Size- and shape-controlled porous carbon nanocubes containing metallic nanoparticles are synthesized by the two-step pyrolysis of a bimetallic Prussian blue analog (PBA) precursor. The simple sulfurization-induced formation of highly conductive CuS along with FeS₂ facilitates sodium-ion diffusion and enhances the redox reversibility upon cycling. The mesoporous carbon structure provides excellent electrolyte impregnation, efficient charge transport pathways, and good volume expansion buffering. The CuS/FeS₂ @NC nanocube anode exhibits excellent sodium storage characteristics including high desodiation capacity (608 mAh g^-1 at 0.2 A g^-1 ), remarkable long-term cycle life (99.1% capacity retention after 300 cycles at 5 A g^-1 ), and good rate capability up to 5 A g^-1 . The simple, facile synthetic route combined with the rational design of bimetallic PBA nanostructures can be widely utilized in the development of conversion-based metal sulfides and other high-capacity anode materials for high-performance SIBs.

Spatially Confined Synthesis of SnSe Spheres Encapsulated in N, Se Dual-Doped Carbon Networks toward Fast and Durable Sodium Storage

On account of the high theoretical capacity and preferable electrochemical reversibility, tin selenides have emerged as potential anode materials in the field of sodium ion batteries (SIBs). Unfortunately, the large volume changes, low electrical conductivity, and shuttling effect of polyselenides have impeded their real application. In this work, we present a spatially confined reaction approach for controllable fabrication of SnSe spheres, which are embedded in polydopamine (PDA)-derived N, Se dual-doped carbon networks (SnSe@NSC) through a one-step carbonization and selenization method. The NSC shell can not only buffer the volume changes during the cycling but also ensure strong coupling interaction between the SnSe core and carbon shell through Sn-C bonds, leading to excellent conductivity and structural integrity of the composite. Meanwhile, DFT theory calculations confirm that N, Se codoping in the carbon shell can endow the composite with enhanced adsorption energy and accelerated transfer ability of Na⁺. Consequently, the SnSe@NSC anode exhibits a high discharge capacity of 302.6 mA h g^-1 over 500 cycles at 1 A g^-1 and a competitive rate capability of 285.3 mA h g^-1 at 10 A g^-1. Additionally, a sodium ion full battery is assembled by coupling the SnSe@NSC anode with the cathode of Na₃V₂(PO₄)₃ and verified with good cycling durability (190 mA h g^-1 at 1 A g^-1 over 500 cycles) and high energy density (204.3 W h kg^-1). Our scalable and facile design of heterostructured SnSe@NSC provides a new avenue to develop novel advanced anode materials for SIBs.

Complementary combinative strategy of defect engineering and graphene coupling for efficient energy-functional materials

The synergetic combination of defect engineering and graphene coupling enables to develop an effective way of exploring efficient bifunctional electrocatalyst/electrode materials. Defect-engineered amorphous MoO₂ -reduced graphene oxide (rGO) nanohybrid was synthesized by soft-chemical reduction of K₂ MoO₄ in graphene oxide colloids. Mo K-edge X-ray absorption spectroscopy clearly demonstrates the rutile-type local atomic structure of amorphous MoO₂ with significant oxygen vacancies and intimate electronic coupling with rGO. The defect-introduced MoO₂ -rGO nanohybrid shows excellent bifunctionality as electrocatalyst for hydrogen evolution reaction and electrode for sodium-ion batteries, which are superior to those of crystalline MoO₂ -rGO homologue. The beneficial effect of simultaneous defect control and rGO coupling can be ascribed to the provision of oxygen vacancies acting as active sites, the increase of electrical conductivity, and the improvement of reaction kinetics.

MOF-Derived ZnS Nanodots/Ti3C2Tx MXene Hybrids Boosting Superior Lithium Storage Performance

ZnS has great potentials as an anode for lithium storage because of its high theoretical capacity and resource abundance; however, the large volume expansion accompanied with structural collapse and low conductivity of ZnS cause severe capacity fading and inferior rate capability during lithium storage. Herein, 0D-2D ZnS nanodots/Ti₃C₂T_x MXene hybrids are prepared by anchoring ZnS nanodots on Ti₃C₂T_x MXene nanosheets through coordination modulation between MXene and MOF precursor (ZIF-8) followed with sulfidation. The MXene substrate coupled with the ZnS nanodots can synergistically accommodate volume variation of ZnS over charge-discharge to realize stable cyclability. As revealed by XPS characterizations and DFT calculations, the strong interfacial interaction between ZnS nanodots and MXene nanosheets can boost fast electron/lithium-ion transfer to achieve excellent electrochemical activity and kinetics for lithium storage. Thereby, the as-prepared ZnS nanodots/MXene hybrid exhibits a high capacity of 726.8 mAh g^-1 at 30 mA g^-1, superior cyclic stability (462.8 mAh g^-1 after 1000 cycles at 0.5 A g^-1), and excellent rate performance. The present results provide new insights into the understanding of the lithium storage mechanism of ZnS and the revealing of the effects of interfacial interaction on lithium storage performance enhancement.

Chemical Heterointerface Engineering on Hybrid Electrode Materials for Electrochemical Energy Storage

The chemical heterointerfaces in hybrid electrode materials play an important role in overcoming the intrinsic drawbacks of individual materials and thus expedite the in-depth development of electrochemical energy storage. Benefiting from the three enhancement effects of accelerating charge transport, increasing the number of storage sites, and reinforcing structural stability, the chemical heterointerfaces have attracted extensive interest and the electrochemical performances of hybrid electrode materials have been significantly optimized. In this review, recent advances regarding chemical heterointerface engineering in hybrid electrode materials are systematically summarized. Especially, the intrinsic behaviors of chemical heterointerfaces on hybrid electrode materials are refined based on built-in electric field, van der Waals interaction, lattice mismatch and connection, electron cloud bias and chemical bond, and their combination. The strategies for introducing chemical heterointerfaces are classified into in situ local transformation, in situ growth, cosynthesis, and other strategy. The recent progress about the chemical heterointerfaces engineering specially focusing on metal-ion batteries, supercapacitors, and Li-S batteries are introduced in detail. Furthermore, the classification and characterization of chemical heterointerfaces are briefly described. Finally, the emerging challenges and perspectives about future directions of chemical heterointerface engineering are proposed.

Unlocking Rapid and Robust Sodium Storage Performance of Zinc-Based Sulfide via Indium Incorporation

Zinc sulfide (ZnS) exhibits promise in sodium-ion batteries (SIBs) because of its low operation voltage and high theoretical specific capacity. However, pristine ZnS is not adequate in realizing rapid and robust sodium storage owing to its low reversibility, poor structure stability, and sluggish kinetics. To date, most efforts focus on utilizing carbonaceous incorporation to improve its electrochemical performances. Nevertheless, it remains an arduous challenge for realizing superior rate capability while obtaining stable cycling. Herein, inspired by the crystal structure of hexagonal ZnIn₂S₄, which possesses an intrinsic layered feature with larger unit-cell volume versus that of ZnS, indium incorporation is thus deployed as an immediate remedy. In/ex situ investigations combined with density functional theory calculations are conducted to reveal the superior kinetics, high reversibility, and good structure stability of ZnIn₂S₄. Notably, the formed indium-based derivatives during cycling manifest a Na⁺ (de)intercalation process, thereby exciting a synergetic mechanism to stabilize electrochemical cycling. As a result, the electrochemical performances of Zn-based sulfide are significantly improved via the indium incorporation. Furthermore, a full cell based on the ZnIn₂S₄ anode with the superior electrochemical performance is developed. This work provides an effective tactic of heteroatom incorporation for optimizing structure as well as exciting a complementary reaction process toward developing superior anodes for high-performance alkali-ion batteries.

Tuning Interface Bridging Between MoSe2 and Three-Dimensional Carbon Framework by Incorporation of MoC Intermediate to Boost Lithium Storage Capability

Highlights

MoSe2/MoC/C multiphase boundaries boost ionic transfer kinetics. MoSe2 (5–10 nm) with rich edge sites is uniformly coated in N-doped framework. The obtained MoSe2 nanodots achieved ultralong cycle performance in LIBs and high capacity retention in full cell.

Abstract

Interface engineering has been widely explored to improve the electrochemical performances of composite electrodes, which governs the interface charge transfer, electron transportation, and structural stability. Herein, MoC is incorporated into MoSe2/C composite as an intermediate phase to alter the bridging between MoSe2- and nitrogen-doped three-dimensional (3D) carbon framework as MoSe2/MoC/N–C connection, which greatly improve the structural stability, electronic conductivity, and interfacial charge transfer. Moreover, the incorporation of MoC into the composites inhibits the overgrowth of MoSe2 nanosheets on the 3D carbon framework, producing much smaller MoSe2 nanodots. The obtained MoSe2 nanodots with fewer layers, rich edge sites, and heteroatom doping ensure the good kinetics to promote pseudo-capacitance contributions. Employing as anode material for lithium-ion batteries, it shows ultralong cycle life (with 90% capacity retention after 5000 cycles at 2 A g−1) and excellent rate capability. Moreover, the constructed LiFePO4//MoSe2/MoC/N–C full cell exhibits over 86% capacity retention at 2 A g−1 after 300 cycles. The results demonstrate the effectiveness of the interface engineering by incorporation of MoC as interface bridging intermediate to boost the lithium storage capability, which can be extended as a potential general strategy for the interface engineering of composite materials.

Electronic supplementary material

The online version of this article (10.1007/s40820-020-00511-4) contains supplementary material, which is available to authorized users.

Controllable Synthesis of Two-Dimensional Molybdenum Disulfide (MoS2 ) for Energy-Storage Applications

Lamellar molybdenum disulfide (MoS₂ ) has attracted a wide range of research interests in recent years because of its two-dimensional layered structure, ultrathin thickness, large interlayer distance, adjustable band gap, and capability to form different crystal structures. These special characteristics and high anisotropy have made MoS₂ widely applicable in energy storage and harvesting. In this Minireview, a systematic and comprehensive introduction to MoS₂ , as well as its composites, is presented. It is aimed to summarize the various synthetic methods of MoS₂ -based composites and their application in energy-storage devices (lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, and supercapacitors) in detail. Based on recent studies, this Minireview provides important and comprehensive guidelines for further study and development efforts in the MoS₂ in energy-storage field.

Pyrrhotite Fe1-x S microcubes as a new anode material in potassium-ion batteries

Potassium-ion batteries are an emerging energy storage technology that could be a promising alternative to lithium-ion batteries due to the abundance and low cost of potassium. Research on potassium-ion batteries has received considerable attention in recent years. With the progress that has been made, it is important yet challenging to discover electrode materials for potassium-ion batteries. Here, we report pyrrhotite Fe_1-x S microcubes as a new anode material for this exciting energy storage technology. The anode delivers a reversible capacity of 418 mAh g^-1 with an initial coulombic efficiency of ~70% at 50 mA g^-1 and a great rate capability of 123 mAh g^-1 at 6 A g^-1 as well as good cyclability. Our analysis shows the structural stability of the anode after cycling and reveals surface-dominated K storage at high rates. These merits contribute to the obtained electrochemical performance. Our work may lead to a new class of anode materials based on sulfide chemistry for potassium storage and shed light on the development of new electrochemically active materials for ion storage in a wider range of energy applications.