Regulating Zn Deposition via an Artificial Solid-Electrolyte Interface with Aligned Dipoles for Long Life Zn Anode

Inorganic-metal hybrid coating for stabilizing and regulating aqueous zinc anodes

Aqueous zinc ion batteries (ZIBs) are expected to be the next generation of energy storage devices. However, the unwanted dendrites growth on zinc anodes, hydrogen evolution and other side reactions hinder the practical application of ZIBs. Here, we designed a novel inorganic-metal hybrid coating with an optimised electric double layer structure at the zinc anode/electrolyte interface. The hybrid coating effectively promotes ionic desolvation, reduces the nucleation overpotential, and suppresses the 2D diffusion process. Furthermore, the coating has good stability and inhibits the dendrites growth, hydrogen precipitation corrosion, and by-products generation. Consequently, the hybrid coating-modified Zn anode exhibited excellent electrochemical performance. Among them, the symmetric cell was able to cycle for 1480 h at 1 mA cm-2, 1 mAh cm-2 with an overpotential of ∼34 mV. The symmetric cell achieved a cycle life of ∼1000 h even at a high current of 3 mA cm-2. The cycling performance and multiplication rate performance in full cells were also demonstrated. This work shows the effectiveness and feasibility of hybrid coating to modulate zinc anode/electrolyte interface.

Immobilizing Zwitterionic Molecular Brush in Functional Organic Interfacial Layers for Ultra-Stable Zn-Ion Batteries

Rechargeable zinc-ion batteries have emerged as one of the most promising candidates for large-scale energy storage applications due to their high safety and low cost. However, the use of Zn metal in batteries suffers from many severe issues, including dendrite growth and parasitic reactions, which often lead to short cycle lives. Herein, we propose the construction of functional organic interfacial layers (OIL) on the Zn metal anodes to address these challenges. Through a well-designed organic-assist pre-construction process, a densely packed artificial layer featuring the immobilized zwitterionic molecular brush can be constructed, which can not only efficiently facilitate the smooth Zn plating and stripping, but also introduce a stable environment for battery reactions. Through density functional theory calculations and experimental characterizations, we verify that the immobilized organic propane sulfonate on Zn anodes can significantly lower the energy barrier and increase the kinetics of Zn2+ transport. Thus, the Zn metal anode with the functional OIL can significantly improve the cycle life of the symmetric cell to over 3500 h stable operation. When paired with the H2V3O8 cathode, the aqueous Zn-ion full cells can be continuously cycled over 7000 cycles, marking an important milestone for Zn anode development for potential industrial applications.

Silane cooperation with Ce2(SO4)3 to efficiently construct a protective layer and induce uniform deposition of Zn2+ for an ultra-stable Zn anode

Aqueous Zn ion batteries (ZIBs) are gaining interest for use in large-scale energy storage systems due to their intrinsic safety, low cost, and sustainability. Unfortunately, water-induced side reactions and dendrite growth on the Zn anode have severely hampered their further development. Herein, 3-aminopropyltrimethoxysilane (KH-540) was employed as an electrolyte additive to construct an organic-inorganic solid-electrolyte interface (SEI) layer comprising zinc hydroxy sulfate and polysiloxane to alleviate the side reactions and inhibit dendrite growth. Moreover, Ce2(SO4)3 was simultaneously introduced to shield the protuberances on the surface of the Zn anode, thus effectively decreasing the "tip effect". Due to the synergistic effect of the dual additives, uniform Zn deposition was achieved and the cycling stability of Zn anode significantly improved. As a result, the Zn‖Zn symmetric battery exhibits a long cycle life of 5000 h at a current density of 1.0 mA cm-2 with an areal capacity of 1.0 mA h cm-2, as well as high Coulombic efficiency of nearly 100%. The Zn‖V2O5 full cell delivers a high specific capacity of 188.35 mA h g-1 even after 1000 cycles.

Practical issues toward high-voltage aqueous rechargeable batteries

This review offers a critical and exhaustive examination of the current state and innovative advances in high-voltage Li, Na, K, and Zn aqueous rechargeable batteries, an area poised for significant technological breakthroughs in energy storage systems. The practical issues that have traditionally hampered the development of aqueous batteries, such as limited operating potential windows, challenges in stable solid-electrolyte interphase (SEI) formation, the need for active materials optimized for aqueous environments, the misunderstood intercalation chemistry, the unreliable assessment techniques, and the overestimated performance and underestimated physicochemical and electrochemical drawbacks, are highlighted. We believe that this review not only brings together existing knowledge but also pushes the boundaries by providing a roadmap for future research and development efforts aimed at overcoming the longstanding challenges faced by the promising aqueous rechargeable batteries.

Bi-Functional Agarose-Filled Porous Polysulfone Protective Layer for Dendrite-Free Zn Anode

The uneven electric field and slow Zn2+ desolvation lead to rapid dendrite growth during Zn plating and stripping, which severely deteriorates the performance of Zn metal anodes (ZMAs) in Zn-ion batteries (ZIBs). Although polymer-based artificial protective (PBAP) layers are widely applied to homogenize the electric field of ZMAs, they often fail to promote the desolvation process that eventually induces Zn dendrite growth. Herein, a bi-functional protective layer, comprising a finger-like porous matrix of polysulfone (PSF) and a hydroxyl-rich filler of agarose (AG), is constructed to suppress Zn dendrite growth. COMSOL simulation demonstrates the ZMAs with bi-functional protective layers (Zn@PSF/AG) exhibit uniform electric field and Zn2+ distribution. Besides, the Zn@PSF/AG has both low desolvation energy and nucleation overpotential, effectively promoting the desolvation of Zn2+. Therefore, the Zn@PSF/AG symmetric cell exhibits excellent cycling performance, achieving 4200 h at 1 mA cm-2/1 mAh cm-2 and 1000 h at 5 mA cm-2/5 mAh cm-2. When coupling with ZnxV2O5 (ZnVO) cathode, the ZnVO‖Zn@PSF/AG full cell shows similarly high cycling stability, maintaining 72% of its capacity after 7000 cycles at 10 A g-1. This research highlights the positive roles of PBAP layer with multi-functional matrix-filler structure in developing long-life ZIBs.

Stabilizing zinc anodes with sodium lignosulfonate-doped polypyrrole

Despite zinc-based electrochemical energy storage being considered a safe and efficient energy storage system, problems such as uncontrolled dendrite growth, hydrogen precipitation reactions, and corrosion have seriously hindered its commercialization. Mitigating dendrite growth and other associated issues is crucial for the successful commercialization of these systems. Sodium lignosulfonate is an excellent dopant for conductive polymers, which can endow conductive polymers with abundant functional groups. Herein, we propose a sodium lignosulfonate-doped polypyrrole protective layer for zinc anodes with good hydrophilicity, electrical conductivity, and a porous structure, which can effectively inhibit the growth of zinc dendrites and side reactions. The doping of sodium lignosulfonate introduces numerous zincophilic groups. The sulfonate groups enhance zinc ion interaction and regulate flux, while phenolic hydroxyl groups increase zincophilic sites, aiding in the uniform deposition of zinc.

Design of Highly Stable Binder-Free Sn-Al Sol Coating for Zinc Metal Anode

The construction of artificial solid electrolyte interfaces on zinc anodes is recognized as an effective strategy to mitigate zinc dendrite formation and side reactions; however, existing methods are often complex and time-consuming. In this study, we successfully fabricated a highly stable Sn-Al sol protective layer on the surface of the zinc anode using a simple spray-coating technique. This protective layer significantly enhances the electrochemical performance of zinc symmetric cells, achieving stable cycling for over 2500 h at 1 mA cm-2. In Zn//Cu half-cells, the Sn-Al sol coating improves charge-discharge efficiency and cycling stability, with over 500 and 950 cycles at 1 and 5 mA cm-2, respectively. The average charge-discharge efficiency during stable cycling reaches 95.7%, in contrast to 85.0% for bare Zn, indicating improved utilization of Zn2+. Additionally, the Sn-Al sol coating offers enhanced corrosion resistance and effectively promotes uniform Zn2+ growth along the (101) crystal plane, reducing dendrite formation. Overall, this simple spray-coating approach presents significant potential for high-stability modifications of zinc anodes, offering a novel strategy for the industrial application of zinc-ion batteries.

Reviving Zn Dendrites to Electroactive Zn2+ by Ion Sieve Interface

Zn0 dendrite formation during repeated plating/stripping processes limits the practical use of Zn-metal anodes in reliable and affordable energy storage. Traditional methods, including dendrite suppression and dendrite regulation, fail under demanding performance conditions due to Zn2+ diffusion limitations and concentration gradients. Here, using an in situ pre-zincation approach, a Li2ZnxTi3-xO8 (LZTO, 0 Collapse

Key Words

• Zn anode
• Zn2+ ion sieve
• dendrite‐free
• interface engineering

Collapse

MESH Headings Collapse

Grants

• 52162036 National Natural Science Foundation of China
• 22378342 National Natural Science Foundation of China
• 2021D01D08 Nature Science Foundation of Xinjiang Province
• 2022A01005-4 Xinjiang Autonomous Region Major Projects
• 2021A01001-1 Xinjiang Autonomous Region Major Projects
• No. 202006750014 China Scholarship Council
• FL210100050 Australian Research Council
• DE240100159 Australian Research Council

Collapse

Affiliation(s)

Zhenjie Liu State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi, Xinjiang, 830017, China
Murong Xi State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi, Xinjiang, 830017, China
Guanjie Li School of Chemical Engineering, The University of Adelaide, Engineering North, North Terrace Campus, The University of Adelaide, Adelaide, South Australia, 5069, Australia
Yudai Huang State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi, Xinjiang, 830017, China
Lei Mao School of Chemical Engineering, The University of Adelaide, Engineering North, North Terrace Campus, The University of Adelaide, Adelaide, South Australia, 5069, Australia
Jun Xu School of Chemical Engineering, The University of Adelaide, Engineering North, North Terrace Campus, The University of Adelaide, Adelaide, South Australia, 5069, Australia
Wei Wang State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi, Xinjiang, 830017, China
Zihan Qi State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi, Xinjiang, 830017, China
Juan Ding State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi, Xinjiang, 830017, China
Shilin Zhang School of Chemical Engineering, The University of Adelaide, Engineering North, North Terrace Campus, The University of Adelaide, Adelaide, South Australia, 5069, Australia
Zaiping Guo School of Chemical Engineering, The University of Adelaide, Engineering North, North Terrace Campus, The University of Adelaide, Adelaide, South Australia, 5069, Australia

Collapse

Collaborators Collapse

Long-Life Zinc Anodes via Molecular-Layer-Deposited Inorganic-Organic Hybrid Titanicone Thin Films

Zinc-ion batteries (ZIBs) have consistently faced challenges related to the instability of the zinc anode. Uncontrolled dendrite growth, hydrogen evolution reaction (HER), and byproduct accumulation on the zinc anode severely affect the cycling life of ZIBs. Herein, inorganic-organic hybrid thin films of titanicones (Ti-based hydroquinone, TiHQ) were fabricated by molecular layer deposition (MLD) technology to modify the zinc metal anode. The MLD-based Zn@TiHQ anode suppresses the dendrite growth on the anode surface, reduces side reactions, and facilitates the desolvation and rapid transport of Zn2+ ions. As a result, it maintains an average Coulombic efficiency (CE) as high as 99.1% over 300 cycles at 0.5 mA cm-2 and 1 mAh cm-2, exhibiting excellent cycling stability for over 2800 h and enhancing the reversible capacity of the Zn@TiHQ||MnO2 full cell. This work demonstrates that the MLD-derived inorganic-organic hybrid TiHQ coating provides a more stable interfacial environment for the zinc anode, opening an avenue for designing high-performance zinc anodes.

Long cycle life aqueous zinc-ion battery enabled by a ZIF-N protective layer with electron-withdrawing group and zincophilicity on the Zn anode

Aqueous zinc-ion batteries (AZIBs) have garnered attention from researchers for their high theoretical capacity, safety, and low cost. However, the uncontrolled growth of zinc (Zn) dendrites and spontaneous corrosion reactions on the Zn anode significantly compromise the cycle life of AZIBs. This paper proposes the utilization of a novel zeolitic imidazole framework (ZIF-N) material with zincophilicity and hydrophilicity for modifying the Zn anode of AZIBs. ZIF-N incorporates numerous electron-withdrawing nitro groups at the Zn/ZIF-N interface to regulate the uneven electron distribution on the Zn anode. The modified Zn anode (Zn@ZIF-N) exhibits a lower polarization ratio (32.18 mV at 4 mA cm-2) and an extended cycle life (over 700 h at 4 mA cm-2). At a current density of 1 mA cm-2, the battery composed of a Zn@ZIF-N anode and NVO (NaV3O8) achieves a cycle life of 1600 cycles. This work provides a straightforward and cost-effective strategy for modifying the Zn anode to prolong the cycle life of AZIBs.

Thin Zinc Electrodes Stabilized with Organobromine-Partnered H2O-Zn-MeOH Cluster Ions for Practical Zinc-Metal Pouch Cells

The utilization of thin zinc (Zn) anodes with a high depth of discharge is an effective strategy to increase the energy density of aqueous Zn metal batteries (ZMBs), but challenged by the poor reversibility of Zn electrode due to the serious Zn-consuming side reactions at the Zn||electrolyte interface. Here, we introduce 2-bromomethyl-1,3-dioxolane (BDOL) and methanol (MeOH) as electrolyte additive into aqueous ZnSO4 electrolyte. In the as-formulated electrolyte, BDOL with a strong electron-withdrawing group (-CH2Br) tends to pair with the H2O-Zn-MeOH complex, leading to the formation of organobromine-partnered H2O-Zn-MeOH cluster ions. During the Zn electrodeposition process, the formed ZnO-dominated by-products induce the polymerization of BDOL monomers, which are previously adsorbed on the electrode. As a result, a uniform dual-layer SEI with ZnO-dominated outer layer and polyether-dominated inner layer is built on the surface of Zn electrode. With such an in situ formed dual-layer SEI, the Zn||Mg0.9Mn3O7 ⋅ 2.7H2O pouch cell using a 10-um Zn anode (corresponding to a low negative to positive areal capacity ratio of 3.56) successfully operated for 300 cycles with a high capacity retention of 86 %, promising a high practical energy density of >120 Wh/kg (based on the total mass of Zn and Mg0.9Mn3O7 ⋅ 2.7H2O).

Engineering of Charge Density at the Anode/Electrolyte Interface for Long-Life Zn Anode in Aqueous Zinc Ion Battery

The aqueous zinc ion battery emerges as the promising candidate applied in large-scale energy storage system. However, Zn anode suffers from the issues including Zn dendrite, Hydrogen evolution reaction and corrosion. These challenges are primarily derived from the instability of anode/electrolyte interface, which is associated with the interfacial charge density distribution. In this context, the recent advancements concentrating on the strategies and mechanisms to regulate charge density at the Zn anode/electrolyte interface are summarized. Different characterization techniques for charge density distribution have been analysed, which can be applied to assess the interfacial zinc ion transport. Additionally, the charge density regulations at the Zn anode/electrolyte interface are discussed, elucidating their roles in modulating electrostatic interactions, electric field, structure of solvated zinc ion and electric double layer, respectively. Finally, the perspectives and challenges on the further research are provided to establish the stable anode/electrolyte interface by focusing on charge density modifications, which is expected to facilitate the development of aqueous zinc ion battery.

Polyacrylamide-based hydrogel electrolyte for modulating water activity in aqueous hybrid batteries

While zinc-ion and hybrid aqueous battery systems have emerged as potential substitutes for expensive lithium-ion batteries, issues like side reactions, limited electrochemical stability, and electrolyte leakage hinder their commercialization. Due to their low cost, high stability, minimal leakage risks, and a wide variety of modification opportunities, hydrogel electrolytes are considered the most promising solution compared to liquid or solid electrolytes. Here, we synthesized a dual-function hydrogel electrolyte based on polyacrylamide and poly(ethylene dioxythiophene):polystyrene (PPP). This electrolyte reduces water content and enhances stability by minimizing side reactions while swelling in a binary ethylene glycol and water solution (EG 10%) further stabilizes the battery system. The developed hydrogel exhibits relatively good ionic conductivity (1.6 × 10-3 S cm-1) and excellent electrochemical stability, surpassing 2.5 V on linear sweep voltammetry tests. The PPP-based system reached a value of 119.2 mA g-1, while the aqueous electrolyte reached only 80.4 mA g-1 specific capacity. The rechargeable PPP hydrogel electrolyte-based hybrid aqueous battery with zinc anode achieved more than 600 cycles. Coulombic efficiency (CE) remained at 99%, indicating good electrochemical reaction stability and reversibility. This study highlights the potential of polyacrylamide-based hydrogel electrolytes with dual functionality as the electrolyte and separator, inspiring further development in hydrogel electrolytes for aqueous battery systems. This study highlights the potential of polyacrylamide-based hydrogel electrolytes with dual functionality as the electrolyte and separator, inspiring further development in hydrogel electrolytes for aqueous battery systems.

The Introduction of a BaTiO3 Polarized Coating as an Interface Modification Strategy for Zinc-Ion Batteries: A Theoretical Study

Aqueous zinc-ion batteries (AZIBs) have become a promising and cost-effective alternative to lithium-ion batteries due to their low cost, high energy, and high safety. However, dendrite growth, hydrogen evolution reactions (HERs), and corrosion significantly restrict the performance and scalability of AZIBs. We propose the introduction of a BaTiO3 (BTO) piezoelectric polarized coating as an interface modification strategy for ZIBs. The low surface energy of the BTO (110) crystal plane ensures its thermodynamic preference during crystal growth in experimental processes and exhibits very low reactivity toward oxidation and corrosion. Calculations of interlayer coupling mechanisms reveal a stable junction between BTO (110) and Zn (002), ensuring system stability. Furthermore, the BTO (110) coating also effectively inhibits HERs. Diffusion kinetics studies of Zn ions demonstrate that BTO effectively suppresses the dendrite growth of Zn due to its piezoelectric effect, ensuring uniform zinc deposition. Our work proposes the introduction of a piezoelectric material coating into AZIBs for interface modification, which provides an important theoretical perspective for the mechanism of inhibiting dendrite growth and side reactions in AZIBs.

Accelerated and Guided Zn2+ Diffusion via Polarized Interface Engineering Toward High Performance Wearable Zinc-Ion Batteries

Rechargeable aqueous Zn-ion batteries (ZIBs) are considered as a new energy storage device for wearable electronic equipment. Nowadays, dendrite growth and uneven deposition of zinc have been the principal problems to suppress the development of high-performance wearable zinc-ion batteries. Herein, a perovskite material of LaAlO3 nanoparticle has been applied for interface engineering and zinc anode protection. By adjusting transport channels and accelerating the Zn2+ diffusion, the hydrogen evolution reaction potential is improved, and electric field distribution on the Zn electrode surface is regulated to navigate the fast and uniform deposition of Zn2+. As a proof of demonstration, the assembled LAO@Zn||MnO2 batteries can display the highest capacity of up to 140 mAh g-1 without noticeable decay even after 1000 cycles. Moreover, a motor-driven fan and electronic wristwatch powered by wearable ZIBs can demonstrate the practical feasibility of LAO@Zn||MnO2 in wearable electronic equipment.

Interfacial chemistry in multivalent aqueous batteries: fundamentals, challenges, and advances

As one of the most promising electrochemical energy storage systems, aqueous batteries are attracting great interest due to their advantages of high safety, high sustainability, and low costs when compared with commercial lithium-ion batteries, showing great promise for grid-scale energy storage. This invited tutorial review aims to provide universal design principles to address the critical challenges at the electrode-electrolyte interfaces faced by various multivalent aqueous battery systems. Specifically, deposition regulation, ion flux homogenization, and solvation chemistry modulation are proposed as the key principles to tune the inter-component interactions in aqueous batteries, with corresponding interfacial design strategies and their underlying working mechanisms illustrated. In the end, we present a critical analysis on the remaining obstacles necessitated to overcome for the use of aqueous batteries under different practical conditions and provide future prospects towards further advancement of sustainable aqueous energy storage systems with high energy and long durability.

Molecular Filter Net Synergy with Regulation in Ion Percolation for High-Performance Zn Metal Batteries

The uncontrollable dendrite growth and complex parasitic reactions of Zn metal anodes cause short cycle lives and low Coulombic efficiency, which seriously affect their applications. To address these issues, this research proposes an efficient ion percolating interface constituted by a hydrogen-bonded organic framework (HND) for a highly stable and reversible Zn anode. The hydrogen-bonded skeleton acts as a molecular filter net, capturing water molecules by forming targeted hydrogen-bonding systems with them, sufficiently inhibiting parasitic reactions. Additionally, the interaction of the rich-N and -O electrochemically active sites with Zn2+ effectively regulates its percolation, which greatly enhances the diffusion kinetics of Zn2+, thus facilitating rapid and uniform migration of Zn2+ at the anode surface. Through the above synergistic effect, dendrite-free anodes with highly reversible Zn plating/stripping behaviors can be achieved. Hence, the modified Zn anode (HND@Zn) performs a steady cycling time of more than 1700 h at 1 mA cm-2. Moreover, the HND@Cu||Zn asymmetric cell exhibits a stable charge/discharge process of over 1600 cycles with an average Coulombic efficiency of up to 99.6% at 5 mA cm-2. This work provides some conceptions for the evolution and application of high-performance Zn metal batteries.

Selection of Negative Charged Acidic Polar Additives to Regulate Electric Double Layer for Stable Zinc Ion Battery

Zinc-ion batteries are promising for large-scale electrochemical energy storage systems, which still suffer from interfacial issues, e.g., hydrogen evolution side reaction (HER), self-corrosion, and uncontrollable dendritic Zn electrodeposition. Although the regulation of electric double layer (EDL) has been verified for interfacial issues, the principle to select the additive as the regulator is still misted. Here, several typical amino acids with different characteristics were examined to reveal the interfacial behaviors in regulated EDL on the Zn anode. Negative charged acidic polarity (NCAP) has been unveiled as the guideline for selecting additive to reconstruct EDL with an inner zincophilic H2O-poor layer and to replace H2O molecules of hydrated Zn2+ with NCAP glutamate. Taking the synergistic effects of EDL regulation, the uncontrollable interface is significantly stabilized from the suppressed HER and anti-self-corrosion with uniform electrodeposition. Consequently, by adding NCAP glutamate, a high average Coulombic efficiency of 99.83% of Zn metal is achieved in Zn|Cu asymmetrical cell for over 2000 cycles, and NH4V4O10|Zn full cell exhibits a high-capacity retention of 82.1% after 3000 cycles at 2 A g-1. Recapitulating, the NCAP principle posted here can quicken the design of trailblazing electrolyte additives for aqueous Zn-based electrochemical energy storage systems.

Construction of an n-Type Fluorinated ZnO Interfacial Phase for a Stable Anode of Aqueous Zinc-Ion Batteries

Aqueous rechargeable zinc-ion batteries have become an ideal solution for the next generation of energy storage systems due to their low cost and high safety. However, the uncontrollable zinc dendrites and harmful side reactions of metal zinc anodes hinder the further development of aqueous zinc-ion batteries. In this work, the artificial fluoride zinc oxide (F-ZnO) interface phase is integrated in situ on the surface of zinc foil. The F-ZnO interface phase significantly inhibits the side reactions on the surface of the zinc electrode by reducing the direct contact between the electrolyte and the surface of the zinc foil. In addition, F-ZnO modified by a small amount of F doping shows enhanced conductivity and electron transport capacity, avoiding the accumulation of high concentration Zn2+ on the anode surface, and ultimately promoting the efficient nucleation and orderly deposition of a zinc anode. The cycle life of the symmetrical cell based on F-ZnO is as high as 2600 cycles at an area current density of 4 mA cm-2, which is much better than that of a commercial pure Zn electrode. The modified F-ZnO@Zn anode truly achieves the purpose of prolonging the anode's life.

Surface Engineering on Zinc Anode for Aqueous Zinc Metal Batteries

Rechargeable aqueous zinc metal batteries (AZMBs) are considered as a potential alternative to lithium-ion batteries due to their low cost, high safety, and environmental friendliness. However, the Zn anodes in AZMBs face severe challenges, such as dendrite growth, metal corrosion, and hydrogen evolution, all of which are closely related to the Zn/electrolyte interface. This article offers a short review on surface passivation to alleviate the issues on the Zn anodes. The composition and structure of the surface layers significantly influence their functions and then the performance of the Zn anodes. The recent progresses are introduced, according to the chemical components of the passivation layers on the Zn anodes. Moreover, the challenges and prospects of surface passivation in stabilizing Zn anodes are discussed, providing valuable guidance for the development of AZMBs.

Hybrid Molecular Sieve-Based Interfacial Layer with Physical Confinement and Desolvation Effect for Dendrite-free Zinc Metal Anodes

The side reactions and dendrite growth at the interface of Zn anodes greatly limit their practical applications in Zn metal batteries. Herein, we propose a hybrid molecular sieve-based interfacial layer (denoted as Z7M3) with a hierarchical porous structure for Zn metal anodes, which contains 70 vol % microporous ZSM-5 molecular sieves and 30 vol % mesoporous MCM-41 molecular sieves. Through comprehensive molecular dynamics simulations, we demonstrate that the mesopores (∼2.5 nm) of MCM-41 can limit the disordered diffusion of free water molecules and increase the wettability of the interfacial layer toward aqueous electrolytes. In addition, the micropores (∼0.56 nm) of ZSM-5 can optimize the Zn2+ solvation structures by reducing the bonded water molecules, which simultaneously decrease the constraint force of solvated water molecules to Zn2+ ions, thus promoting the penetrability and diffusion kinetics of Zn2+ ions in Z7M3. The synergetic effects from the hybrid molecular sieves maintain a constant Zn2+ concentration on the surface of the Zn electrode during Zn deposition, contributing to dendrite-free Zn anodes. Consequently, Z7M3-coated Zn electrodes achieved excellent cycling stability in both half and full cells.

In-Situ Ultrafast Construction of Zinc Tungstate Interface Layer for Highly Reversible Zinc Anodes

Constructing artificial solid electrolyte interface on the Zn anode surface is recognized as an appealing method to inhibit zinc dendrites and side reactions, whereas the current techniques are complex and time-consuming. Here, a robust and zincophilic zinc tungstate (ZnWO4) layer has been in situ constructed on the Zn anode surface (denoted as ZWO@Zn) by an ultrafast chemical solution reaction. Comprehensive characterizations and theoretical calculations demonstrate that the ZWO layer can effectively modulate the interfacial electric field distribution and promote the Zn2+ uniform diffusion, thus facilitating the uniform Zn2+ nucleation and suppressing zinc dendrites. Besides, ZWO layer can prevent direct contact between the Zn/water and increase the hydrogen evolution reaction overpotential to eliminate side reactions. Consequently, the in situ constructed ZWO layer facilitates remarkable reversibility in the ZWO@Zn||Ti battery, achieving an impressive Coulombic efficiency of 99.36 % under 1.0 mA cm-2, unprecedented cycling lifespan exceeding 1800 h under 1.0 mA cm-2 in ZWO@Zn||ZWO@Zn battery, and a steady and reliable operation of the overall ZWO@Zn||VS2 battery. The work provides a simple, low cost, and ultrafast pathway to crafting protective layers for driving advancements in aqueous zinc-metal batteries.

Directional Polarization of a Ferroelectric Intermediate Layer Inspires a Built-In Field in Si Anodes to Regulate Li+ Transport Behaviors in Particles and Electrolyte

The silicon (Si) anode is prone to forming a high electric field gradient and concentration gradient on the electrode surface under high-rate conditions, which may destroy the surface structure and decrease cycling stability. In this study, a ferroelectric (BaTiO3) interlayer and field polarization treatment are introduced to set up a built-in field, which optimizes the transport mechanisms of Li+ in solid and liquid phases and thus enhances the rate performance and cycling stability of Si anodes. Also, a fast discharging and slow charging phenomenon is observed in a half-cell with a high reversible capacity of 1500.8 mAh g-1 when controlling the polarization direction of the interlayer, which means a fast charging and slow discharging property in a full battery and thus is valuable for potential applications in commercial batteries. Simulation results demonstrated that the built-in field plays a key role in regulating the Li+ concentration distribution in the electrolyte and the Li+ diffusion behavior inside particles, leading to more uniform Li+ diffusion from local high-concentration sites to surrounding regions. The assembled lithium-ion battery with a BaTiO3 interlayer exhibited superior electrochemical performance and long-term cycling life (915.6 mAh g-1 after 300 cycles at a high current density of 4.2 A g-1). The significance of this research lies in exploring a new approach to improve the performance of lithium-ion batteries and providing new ideas and pathways for addressing the challenges faced by Si-based anodes.

Design Strategies toward High-Performance Zn Metal Anode

Rechargeable aqueous Zn-ion batteries (AZIBs) are one of the most promising alternatives for traditional energy-storage devices because of their low cost, abundant resources, environmental friendliness, and inherent safety. However, several detrimental issues with Zn metal anodes including Zn dendrite formation, hydrogen evolution, corrosion and passivation, should be considered when designing advanced AZIBs. Moreover, these thorny issues are not independent but mutually reinforcing, covering many technical and processing parameters. Therefore, it is necessary to comprehensively summarize the issues facing Zn anodes and the corresponding strategies to develop roadmaps for the development of high-performance Zn anodes. Herein, the failure mechanisms of Zn anodes and their corresponding impacts are outlined. Recent progress on improving the stability of Zn anode is summarized, including structurally designed Zn anodes, Zn alloy anodes, surface modification, electrolyte optimization, and separator design. Finally, this review provides brilliant and insightful perspectives for stable Zn metal anodes and promotes the large-scale application of AZIBs in power grid systems.

Fundamental Understanding of Hydrogen Evolution Reaction on Zinc Anode Surface: A First-Principles Study

Hydrogen evolution reaction (HER) has become a key factor affecting the cycling stability of aqueous Zn-ion batteries, while the corresponding fundamental issues involving HER are still unclear. Herein, the reaction mechanisms of HER on various crystalline surfaces have been investigated by first-principle calculations based on density functional theory. It is found that the Volmer step is the rate-limiting step of HER on the Zn (002) and (100) surfaces, while, the reaction rates of HER on the Zn (101), (102) and (103) surfaces are determined by the Tafel step. Moreover, the correlation between HER activity and the generalized coordination number ([Formula: see text]) of Zn at the surfaces has been revealed. The relatively weaker HER activity on Zn (002) surface can be attributed to the higher [Formula: see text] of surface Zn atom. The atomically uneven Zn (002) surface shows significantly higher HER activity than the flat Zn (002) surface as the [Formula: see text] of the surface Zn atom is lowered. The [Formula: see text] of surface Zn atom is proposed as a key descriptor of HER activity. Tuning the [Formula: see text] of surface Zn atom would be a vital strategy to inhibit HER on the Zn anode surface based on the presented theoretical studies. Furthermore, this work provides a theoretical basis for the in-depth understanding of HER on the Zn surface.

Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures

Aqueous zinc metal batteries (AZMBs) are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc (Zn) metal. However, several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries (AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

Understanding the Electrical Mechanisms in Aqueous Zinc Metal Batteries: From Electrostatic Interactions to Electric Field Regulation

Aqueous Zn metal batteries are considered as competitive candidates for next-generation energy storage systems due to their excellent safety, low cost, and environmental friendliness. However, the inevitable dendrite growth, severe hydrogen evolution, surface passivation, and sluggish reaction kinetics of Zn metal anodes hinder the practical application of Zn metal batteries. Detailed summaries and prospects have been reported focusing on the research progress and challenges of Zn metal anodes, including electrolyte engineering, electrode structure design, and surface modification. However, the essential electrical mechanisms that significantly influence Zn2+ ions migration and deposition behaviors have not been reviewed yet. Herein, in this review, the regulation mechanisms of electrical-related electrostatic repulsive/attractive interactions on Zn2+ ions migration, desolvation, and deposition behaviors are systematically discussed. Meanwhile, electric field regulation strategies to promote the Zn2+ ions diffusion and uniform Zn deposition are comprehensively reviewed, including enhancing and homogenizing electric field intensity inside the batteries and adding external magnetic/pressure/thermal field to couple with the electric field. Finally, future perspectives on the research directions of the electrical-related strategies for building better Zn metal batteries in practical applications are offered.

Achieving highly reversible zinc metal anode via surface termination chemistry

An oxidation layer on a Zn surface is considered to play a negative role in hindering the practical applications of aqueous zinc ion batteries (AZBs). Herein, we demonstrate the importance of Zn-surface termination on the overall electrochemical behavior of AZBs by revisiting the well-known bottleneck issues. Experimental characterizations in conjugation with theoretical calculations reveal that the formation of a dense Zn4(OH)6SO4·xH2O (ZSH) layer from the well-designed surface-oxide termination layer improves the interface stability of the Zn anode and reduces the dehydration energy of Zn(H2O)62+, thereby accelerating the interface transport kinetics of Zn2+. Moreover, instead of directly diffusing over the ZSH layer, a new "edge dehydration-along edge transfer" mechanism of Zn2+ is discovered. Owing to the presence of a Zn anode with a ZnO-derived ZSH layer, an ultrahigh stability of over 1200 h with a high cumulative-plated capacity of 6.24mAh cm-2 is achieved with a symmetrical cell. Furthermore, high cycling stability (over 1000 cycles) and Coulombic efficiency (99.07%) are obtained in the entire AZBs with a MnO2 cathode. An understanding of the oxygen surface termination mechanism is beneficial to Zn-anode protection and is a timely forward step toward the long-pursued practical application of AZBs.

An Electrochemical Perspective of Aqueous Zinc Metal Anode

Based on the attributes of nonflammability, environmental benignity, and cost-effectiveness of aqueous electrolytes, as well as the favorable compatibility of zinc metal with them, aqueous zinc ions batteries (AZIBs) become the leading energy storage candidate to meet the requirements of safety and low cost. Yet, aqueous electrolytes, acting as a double-edged sword, also play a negative role by directly or indirectly causing various parasitic reactions at the zinc anode side. These reactions include hydrogen evolution reaction, passivation, and dendrites, resulting in poor Coulombic efficiency and short lifespan of AZIBs. A comprehensive review of aqueous electrolytes chemistry, zinc chemistry, mechanism and chemistry of parasitic reactions, and their relationship is lacking. Moreover, the understanding of strategies for suppressing parasitic reactions from an electrochemical perspective is not profound enough. In this review, firstly, the chemistry of electrolytes, zinc anodes, and parasitic reactions and their relationship in AZIBs are deeply disclosed. Subsequently, the strategies for suppressing parasitic reactions from the perspective of enhancing the inherent thermodynamic stability of electrolytes and anodes, and lowering the dynamics of parasitic reactions at Zn/electrolyte interfaces are reviewed. Lastly, the perspectives on the future development direction of aqueous electrolytes, zinc anodes, and Zn/electrolyte interfaces are presented.

Stabilizing Zn Metal Anode Through Regulation of Zn Ion Transfer and Interfacial Behavior with a Fast Ion Conductor Protective Layer

Aqueous Zn-ion batteries (AZIBs) attract intensive attention owing to their environmental friendliness, cost-effectiveness, innate safety, and high specific capacity. However, the practical applications of AZIBs are hindered by several adverse phenomena, including corrosion, Zn dendrites, and hydrogen evolution. Herein, a Zn anode decorated with a 3D porous-structured Na3 V2 (PO4)3 (NVP@Zn) is obtained, where the NVP reconstruct the electrolyte/anode interface. The resulting NVP@Zn anode can provide a large quantity of fast and stable channels, facilitating enhanced Zn ion deposition kinetics and regulating the Zn ions transport process through the ion confinement effect. The NASICON-type NVP protective layer promote the desolvation process due to its nanopore structure, thus effectively avoiding side reactions. Theoretical calculations indicate that the NVP@Zn electrode has a higher Zn ion binding energy and a higher migration barrier, which demonstrates that NVP protective layer can enhance Zn ion deposition kinetics and prevent the unfettered 2D diffusion of Zn ions. Therefore, the results show that NVP@Zn/MnO2 full cell can maintain a high specific discharge capacity of 168 mAh g-1 and a high-capacity retention rate of 74.6% after cycling. The extraordinary results obtained with this strategy have confirmed the promising applications of NVP in high-performance AZIBs.

Recent Research Progress into Zinc Ion Battery Solid-Electrolyte Interfaces

Aqueous zinc ion batteries (ZIBs) are prospective next-generation energy storage device candidates owing to resource abundance, affordability, eco-friendliness, and safety. The solid-electrolyte interface (SEI) produced in a ZIB by electrolyte/electrode interactions significantly impacts battery performance. The SEI is known to promote dendrite growth, determine the electrochemical stability window, passivate zinc-metal-anodic corrosion, and mutate the electrolyte. Accordingly, the SEI is closely related to the overall property of a ZIB device. This review provides an overview of the impact of SEIs on ZIB performance recently and provides an SEI design strategy based on the formation mechanism, type, and characteristics of the SEI. Finally, future investigational directions for SEIs in ZIBs are expected to lead to a deep understanding of the SEI, enhance ZIB performance, and facilitate their extensive implementation.

Lotus Effect Inspired Hydrophobic Strategy for Stable Zn Metal Anodes

Zn-ion batteries (ZIBs) have long suffered from the unstable Zn metal anode, which faces numerous challenges concerning dendrite growth, corrosion, and hydrogen evolution reaction. The absence of H2 O adsorption control techniques has become a bottleneck for the further development of ZIBs. Using the stearic acid (SA)-modified Cu@Zn (SA-Cu@Zn) anode as an example, this work illustrates how the lotus effect controls the H2 O adsorption energy on the Zn metal anode. In situ integrated Cu nanorods arrays and hydrophobic long-chain alkyl groups are constructed, which provide zincophilic ordered channels and hydrophobic property. Consequently, the SA-Cu@Zn anode exhibits long-term cycling stability over 2000 h and high average Coulombic efficiency (CE) of 99.83% at 1 mA cm-2 for 1 mAh cm-2 , which improves the electrochemical performance of the Zn||V2 O5 full cell. Density functional theory (DFT) calculations combined with water contact angle (CA) measurements demonstrate that the SA-Cu@Zn exhibits larger water CA and weaker H2 O adsorption than Zn. Moreover, the presence of Cu ensures the selective adsorption of Zn on the SA-Cu@Zn anode, well explaining how the excellent reversibility is achieved. This work demonstrates the effectiveness of the lotus effect on controllable H2 O adsorption and Zn deposition mechanism, offering a universal strategy for achieving stable ZIB anodes.

Zinc-Bromine Rechargeable Batteries: From Device Configuration, Electrochemistry, Material to Performance Evaluation

Zinc-bromine rechargeable batteries (ZBRBs) are one of the most powerful candidates for next-generation energy storage due to their potentially lower material cost, deep discharge capability, non-flammable electrolytes, relatively long lifetime and good reversibility. However, many opportunities remain to improve the efficiency and stability of these batteries for long-life operation. Here, we discuss the device configurations, working mechanisms and performance evaluation of ZBRBs. Both non-flow (static) and flow-type cells are highlighted in detail in this review. The fundamental electrochemical aspects, including the key challenges and promising solutions, are discussed, with particular attention paid to zinc and bromine half-cells, as their performance plays a critical role in determining the electrochemical performance of the battery system. The following sections examine the key performance metrics of ZBRBs and assessment methods using various ex situ and in situ/operando techniques. The review concludes with insights into future developments and prospects for high-performance ZBRBs.

The Effect of Oxygen Vacancies on the Diffusion Characteristics of Zn(II) Ions in the Perovskite SrTiO3 Layer: A Computational Study

A highly polar perovskite SrTiO₃ (STO) layer is considered as one of the promising artificial protective layers for the Zn metal anode of aqueous zinc-ion batteries (AZIBs). Although it has been reported that oxygen vacancies tend to promote Zn(II) ion migration in the STO layer and thereby effectively suppress Zn dendrite growth, there is still a lack of a basic understanding of the quantitative effects of oxygen vacancies on the diffusion characteristics of Zn(II) ions. In this regard, we comprehensively studied the structural features of charge imbalances caused by oxygen vacancies and how these charge imbalances affect the diffusion dynamics of Zn(II) ions by utilizing density functional theory and molecular dynamics simulations. It was found that the charge imbalances are typically localized close to vacancy sites and those Ti atoms that are closest to them, whereas differential charge densities close to Sr atoms are essentially non-existent. We also demonstrated that there is virtually no difference in structural stability between the different locations of oxygen vacancies by analyzing the electronic total energies of STO crystals with the different vacancy locations. As a result, although the structural aspects of charge distribution strongly rely on the relative vacancy locations within the STO crystal, Zn(II) diffusion characteristics stay almost consistent with changing vacancy locations. No preference for vacancy locations causes isotropic Zn(II) ion transport inside the STO layer, which subsequently inhibits the formation of Zn dendrites. Due to the promoted dynamics of Zn(II) ions induced by charge imbalance near the oxygen vacancies, the Zn(II) ion diffusivity in the STO layer monotonously increases with the increasing vacancy concentration ranging from 0% to 16%. However, the growth rate of Zn(II) ion diffusivity tends to slow down at relatively high vacancy concentrations as the imbalance points become saturated across the entire STO domain. The atomic-level understanding of the characteristics of Zn(II) ion diffusion demonstrated in this study is expected to contribute to developing new long-life anode systems for AZIBs.

Challenges and Strategies in the Development of Zinc-Ion Batteries

Although promising, the practical use of zinc-ion batteries (ZIBs) remains plagued with uncontrollable dendrite growth, parasitic side reactions, and the high intercalation energy of divalent Zn²⁺ ions. Hence, much work has been conducted to alleviate these issues to maximize the energy density and cyclic life of the cell. In this holistic review, the mechanisms and rationale for the stated challenges shall be summarized, followed by the corresponding strategies employed to mitigate them. Thereafter, a perspective on present research and the outlook of ZIBs would be put forth in hopes to enhance their electrochemical properties in a multipronged approach.

Zincophilic Electrode Interphase with Appended Proton Reservoir Ability Stabilizes Zn Metal Anodes

The rampant dendrites and hydrogen evolution reaction (HER) resulting from the turbulent interfacial evolution at the anode/electrolyte are the main culprits of short lifespan and low Coulombic efficiency of Zn metal batteries. In this work, a versatile protective coating with excellent zincophilic and amphoteric features is constructed on the surface of Zn metal (ZP@Zn) as dendrite-free anodes. This kind of protective coating possesses the advantages of reversible proton storage and rapid desolvation kinetics, thereby mitigating the HER and facilitating homogeneous nucleation concomitantly. Furthermore, the space charge polarization effect promotes charge redistribution to achieve uniform Zn deposition. Accordingly, the ZP@Zn symmetric cell manifests excellent reversibility at an ultrahigh cumulative plating capacity of 4700 mAh cm^-2 and stable cycling at 80 % depth of discharge (DOD). The ZP@Zn//V₆ O₁₃ pouch cell also reveals superior cycling stability with a high capacity of 326.6 mAh g^-1 .

Two-Dimensional Organic-Inorganic Heterostructure as a Multifunctional Protective Layer for High Performance Zinc Metal Anode

Dendrite growth and side reactions of Zn metal anodes remain unresolved obstacles for practical application of aqueous Zn ion batteries. Herein, a two-dimensional (2D) organic-inorganic heterostructure with controlled thickness was constructed as a protective layer for a Zn metal anode. The reduction of uniformly distributed polyoxometalate in the layer causes a negative charge density gradient, which can accelerate zinc ion transfer, homogenize zinc deposition, and shield sulfates at the electrode interface, while the exposed hydrophobic alkyl chain of the layer can isolate the direct contact of water with the Zn anode. As a result of the synergetic effect, this 2D organic-inorganic heterostructure enables high Zn plating/stripping reversibility, with high average Coulombic efficiencies of 99.97% for 3700 cycles at 2 mA cm^-2. Under high Zn utilization conditions, a high areal-capacity full cell with hundreds of cycles was demonstrated.

Isotropic Amorphous Protective Layer with Uniform Interfacial Zincophobicity for Stable Zinc Anode

Aqueous zinc-ion batteries (AZIBs) have drawn the attention of numerous researchers owing to their high safety and cost-effectiveness. However, the dendrite growth and side reactions of the zinc (Zn) anodes limit their further practical applications. Herein, a porous amorphous silicon nitride protective layer with high zincophobicity is constructed on the Zn anode surface, which can guide the uniform stripping/plating of Zn²⁺ underneath the protective layer through its isotropic Zn affinity to alleviate the growth of dendrites and by-products. As a result, the amorphous silicon nitride-protected Zn anode can maintain a stable Coulombic efficiency (CE) of 98.8% and low voltage hysteresis for 710 cycles in the half cell. The full cell with the as-prepared Zn anode can deliver excellent electrochemical performances (89.0% capacity retention and 144.4 mAh g^-1 discharge capacity after 1000 cycles at 4 A g^-1 ). This work reveals the key role of uniform metal affinity induced by the amorphous materials in the interface modification of metal anodes, which is instructive for the design of stable metal anodes.

Interface Reversible Electric Field Regulated by Amphoteric Charged Protein-Based Coating Toward High-Rate and Robust Zn Anode

Metallic interface engineering is a promising strategy to stabilize Zn anode via promoting Zn²⁺ uniform deposition. However, strong interactions between the coating and Zn²⁺ and sluggish transport of Zn²⁺ lead to high anodic polarization. Here, we present a bio-inspired silk fibroin (SF) coating with amphoteric charges to construct an interface reversible electric field, which manipulates the transfer kinetics of Zn²⁺ and reduces anodic polarization. The alternating positively and negatively charged surface as a build-in driving force can expedite and homogenize Zn²⁺ flux via the interplay between the charged coating and adsorbed ions, endowing the Zn-SF anode with low polarization voltage and stable plating/stripping. Experimental analyses with theoretical calculations suggest that SF can facilitate the desolvation of [Zn(H₂O)₆]²⁺ and provide nucleation sites for uniform deposition. Consequently, the Zn-SF anode delivers a high-rate performance with low voltage polarization (83 mV at 20 mA cm^-2) and excellent stability (1500 h at 1 mA cm^-2; 500 h at 10 mA cm^-2), realizing exceptional cumulative capacity of 2.5 Ah cm^-2. The full cell coupled with Zn_xV₂O₅·nH₂O (ZnVO) cathode achieves specific energy of ~ 270.5/150.6 Wh kg^-1 (at 0.5/10 A g^-1) with ~ 99.8% Coulombic efficiency and retains ~ 80.3% (at 5.0 A g^-1) after 3000 cycles.

Metal-Organic Frameworks Functionalized Separators for Robust Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are one of the promising energy storage systems, which consist of electrode materials, electrolyte, and separator. The first two have been significantly received ample development, while the prominent role of the separators in manipulating the stability of the electrode has not attracted sufficient attention. In this work, a separator (UiO-66-GF) modified by Zr-based metal organic framework for robust AZIBs is proposed. UiO-66-GF effectively enhances the transport ability of charge carriers and demonstrates preferential orientation of (002) crystal plane, which is favorable for corrosion resistance and dendrite-free zinc deposition. Consequently, Zn|UiO-66-GF-2.2|Zn cells exhibit highly reversible plating/stripping behavior with long cycle life over 1650 h at 2.0 mA cm^-2, and Zn|UiO-66-GF-2.2|MnO₂ cells show excellent long-term stability with capacity retention of 85% after 1000 cycles. The reasonable design and application of multifunctional metal organic frameworks modified separators provide useful guidance for constructing durable AZIBs.

Long-Life Aqueous Zinc-Ion Batteries of Organic Iminodianthraquinone/rGO Cathode Assisted by Zn2+ Binding with Adjacent Molecules

Organic compounds have been extensively used as zinc-ion battery (ZIB) cathodes due to their high capacities and outstanding properties. Nevertheless, poor electrical conductivity limits their developments. RGO (reduced graphene oxide) can well interact with organic compounds through π-π stacking for furnishing capacious ion diffusion paths and active sites to enhance conductivity and capacity. Herein, a 1,1'-iminodianthraquinone (IDAQ)/rGO composite is utilized as cathode of ZIBs, demonstrating ultrahigh stability with 96% capacity retention after 5000 cycles. Zn2+ and H+ synergetic mechanism in IDAQ/rGO has been deeply discussed by ex situ analysis and theoretical calculation. Consequently, the structure of IDAQ2(H+)6(Zn2+) is the most probable product after discharging progress. Prospectively, the IDAQ/rGO material with excellent stability and good performance would provide new insights into designing advanced ZIBs.

Solid Electrolyte Interface in Zn-Based Battery Systems

Due to its high theoretical capacity (820 mAh g^-1), low standard electrode potential (- 0.76 V vs. SHE), excellent stability in aqueous solutions, low cost, environmental friendliness and intrinsically high safety, zinc (Zn)-based batteries have attracted much attention in developing new energy storage devices. In Zn battery system, the battery performance is significantly affected by the solid electrolyte interface (SEI), which is controlled by electrode and electrolyte, and attracts dendrite growth, electrochemical stability window range, metallic Zn anode corrosion and passivation, and electrolyte mutations. Therefore, the design of SEI is decisive for the overall performance of Zn battery systems. This paper summarizes the formation mechanism, the types and characteristics, and the characterization techniques associated with SEI. Meanwhile, we analyze the influence of SEI on battery performance, and put forward the design strategies of SEI. Finally, the future research of SEI in Zn battery system is prospected to seize the nature of SEI, improve the battery performance and promote the large-scale application.

Designing a Bimodal BaTiO3 Artificial Layer to Boost the Dielectric Effect toward Highly Reversible Dendrite-Free Zn Metal Anodes

With the growing interest in suppressing greenhouse gas emissions from fossil fuel combustion, the implementation of electrical energy storage devices for efficiently utilizing renewable energy is expanding worldwide. Zn-ion batteries are attractive for energy storage because of their safety, eco-friendliness, high energy density, and low cost. However, their commercialization is hindered by the poor rechargeability of the zinc anode because of Zn dendrite growth and hydrogen evolution. Herein, we present the application of an artificial layer composed of bimodal BaTiO₃ particles on Zn metal to boost the dielectric properties and thus enhance the reversibility of Zn anodes during long-term cycling. The BaTiO₃ layer induces electric polarization under external electric fields, causing the Zn ions to move sequentially toward the Zn anode. Moreover, its mechanical characteristics alleviate the volume changes between the BaTiO₃ layer and Zn metal. Consequently, Zn dendrite growth is effectively inhibited, and the electrochemical performance is significantly improved in Zn|Zn symmetric cells, resulting in a low overvoltage (39 mV) and stable cycling (800 h) at 1 mA cm^-2. Moreover, the Zn-ion full cell using an α-MnO₂ cathode exhibits consistent capacity retention up to 380 cycles. This study demonstrates a new strategy to economically and readily suppress dendrite formation by using bimodal dielectric particles as artificial layers to stabilize metal-based batteries.

Biodegradable Gel Electrolyte Suppressing Water-Induced Issues for Long-Life Zinc Metal Anodes

Owing to the inherent properties of aqueous electrolytes, aqueous zinc-ion batteries are considered to be a promising energy storage system. Unfortunately, the water-induced issues, such as hydrogen evolution and corrosion reaction, inevitably occur on the Zn anode surface during cycling, which leads to poor electrochemical performance. The gel polymer electrolyte would reduce the parasitic reactions associated with water. However, the nondegradable polymer is harmful to the environment. Herein, with the aim to alleviate the serious issues derived from water and environmental problems, a biodegradable gum arabic has been proposed to serve as a hydrogel electrolyte for aqueous zinc-ion batteries. The electrochemical activity of water could be reduced by the hydrogen-bond network between the gum arabic and water. Thus, the corrosion and hydrogen evolution reaction (HER) can be restrained by employing the prepared gel electrolyte. Evidenced by the online mass spectrometry, it is found that the less produced H₂ is detected in the biodegradable gel electrolyte-based Zn||Zn symmetric cell during the processes of Zn plating/stripping, showing the inhibited HER. Moreover, the by-product on the Zn anode is barely observed during cycling when using the obtained gel electrolyte. Uniform zinc-ion distribution can be achieved to mitigate Zn dendrite growth in the gel electrolyte. Therefore, the Zn||Zn symmetric cell based on the gel electrolyte exhibits a long lifespan of more than 1300 h, which is longer than that in the aqueous electrolyte. Moreover, the Zn||LiFePO₄ hybrid ion battery based on the gel electrolyte shows improved capacity retention by suppressing the reactions related to water.