Operando Converting BiOCl into Bi2O2(CO3)xCly for Efficient Electrocatalytic Reduction of Carbon Dioxide to Formate

Covalently Modified Electrode with Bismuth Nanoparticles Encapsulated in Ultrathin Porous Organic Polymer Linked by Amine Bonding for Efficient CO2 Electroreduction

Bismuth-based materials in electrocatalytic CO2 reduction (CO2RR) usually face the problem of high overpotential. We first show a covalently modified electrode with Bi nanoparticles encapsulated in ultrathin porous organic polymer nanosheets (POPs) with amine linkages to effectively reduce the overpotential for the CO2-to-formate conversion, which exhibits a high formate Faradaic efficiency (FEHCOO-) of 98.5% and a partial current density up to 148.7 mA cm-2 at -0.85 V in comparison with that of a bare bismuth electrode with a FEHCOO- of 85% at -1.15 V (versus a reversible hydrogen electrode). Different from the reaction mechanism with *CO2•- radicals as the intermediate over bare Bi sites, in situ spectroscopic studies and density functional theory calculations reveal that the abundant amine linkages in the POPs backbone provide chemisorption sites to interact with enriched CO2 molecules to form carbamates (*[-NCOO-]) intermediates with a low reaction barrier of 0.064 eV, which significantly reduces the free energy for the conversion process of CO2 to formate. Moreover, the modified amine linkages promote water dissociation and the subsequent protonation reaction on the Bi surface with a reduced dissociation energy of -0.31 eV than that on the bare Bi surface of 0.11 eV. This work not only delivers a new mechanism for the CO2-to-formate conversion but also offers a clean platform to investigate the influence of covalently modification.

In-situ silver (Ag) clusters strengthed spatial separation of photogenerated charge-carriers for efficient photocatalytic tetracycline antibiotic purification

Metal cluster co-catalysts have been widely considered as an effective strategy to address the energy crisis and environmental problems owning to the efficient light absorption and the enhanced separation of electron hole pairs. In this contribution, via a facile in-situ photoreduction technique, the Ag/(BiO)2CO3 composites were synthesized to degrade the antibiotic pollutant tetracycline (TC). The incorporation of silver (Ag) clusters on (BiO)2CO3 surface can form the built-in electric field (IEF) at the Mott-Schottky junction interface and facilitate the migration of photo-generated electrons from (BiO)2CO3 to Ag clusters. Simultaneously, the synergy of local surface plasmon resonance (LSPR) effect also strengthens the light absorption capacity, and finally improving photocatalytic activities of composite materials. The optimal Ag/(BiO)2CO3 composites exhibit excellent TC degradation, which is approximately 6.7 times than that of the pure (BiO)2CO3. Eventually, the potential degradation pathway of TC is proposed and the toxicity of the intermediates is also evaluated. This work motivates the design of highly efficient metal cluster co-catalysts and widens their potential applications in the environmental remediation.

Stabilizing Lattice Oxygen of Bi2O3 by Interstitial Insertion of Indium for Efficient Formic Acid Electrosynthesis

Bismuth oxide (Bi2O3) emerges as a potent catalyst for converting CO2 to formic acid (HCOOH), leveraging its abundant lattice oxygen and the high activity of its Bi-O bonds. Yet, its durability is usually impeded by the loss of lattice oxygen causing structure alteration and destabilized active bonds. Herein, we report an innovative approach via the interstitial incorporation of indium (In) into the Bi2O3, significantly enhancing bond stability and preserving lattice oxygen. The optimized In-Bi2O3-100 catalyst achieves over 90 % Faradaic efficiency for HCOOH production across a wide potential range, in both H-cells and flow cells, maintaining robust stability after 100 hours of continuous operation. In situ surface-enhanced infrared absorption spectroscopy and theoretical calculations reveal that the interstitial In doping precisely tunes the adsorption of CO2* and OCHO* intermediate, facilitating rapid conversion. Further in situ Raman spectroscopy confirms the role of In bolstering the oxidized structure's stability within Bi2O3, critical for sustaining lattice oxygen during electrochemical CO2 reduction.

Selective CO2 Electroreduction to Multi-Carbon Products on Organic-Functionalized CuO Nanoparticles by Local Micro-Environment Modulation

Surface functionalization of Cu-based catalysts has demonstrated promising potential for enhancing the electrochemical CO2 reduction reaction (CO2RR) toward multi-carbon (C2+) products, primarily by suppressing the parasitic hydrogen evolution reaction and facilitating a localized CO2/CO concentration at the electrode. Building upon this approach, we developed surface-functionalized catalysts with exceptional activity and selectivity for electrocatalytic CO2RR to C2+ in a neutral electrolyte. Employing CuO nanoparticles coated with hexaethynylbenzene organic molecules (HEB-CuO NPs), a remarkable C2+ Faradaic efficiency of nearly 90% was achieved at an unprecedented current density of 300 mA cm-2, and a high FE (> 80%) was maintained at a wide range of current densities (100-600 mA cm-2) in neutral environments using a flow cell. Furthermore, in a membrane electrode assembly (MEA) electrolyzer, 86.14% FEC2+ was achieved at a partial current density of 387.6 mA cm-2 while maintaining continuous operation for over 50 h at a current density of 200 mA cm-2. In-situ spectroscopy studies and molecular dynamics simulations reveal that reducing the coverage of coordinated K⋅H2O water increased the probability of intermediate reactants (CO) interacting with the surface, thereby promoting efficient C-C coupling and enhancing the yield of C2+ products. This advancement offers significant potential for optimizing local micro-environments for sustainable and highly efficient C2+ production.

Anion-Mediated In Situ Reconstruction of the Bi2MoO6 Precatalyst for Enhanced Electrochemical CO2 Reduction over a Wide Potential Window

Electrochemical CO2 reduction reaction (eCO2RR) is a viable approach to achieve carbon neutrality. Bismuth-based electrocatalysts demonstrate exceptional selectivity in CO2-to-formate conversion, but their reconstruction mechanisms during the eCO2RR remain elusive. Herein, the reconstruction processes of bismuth molybdate (Bi2MoO6) nanoplates are elucidated during the eCO2RR. Operando and ex situ measurements reveal the in situ partial reduction of Bi2MoO6 to Bi metal, forming Bi@Bi2MoO6 at negative potentials. Meanwhile, CO32- ions in the electrolyte spontaneously exchange with MoO42- in Bi2MoO6. The obtained Bi@Bi2MoO6/Bi2O2CO3 delivers a formate Faradaic efficiency (FE) of 95.2% at -1.0 V. Notably, high formate FEs (>90%) are maintained within a wide 500 mV window. Although computational calculations indicate a higher energy barrier for *OCHO formation on Bi2O2CO3, the prevention of excessive reduction to metal Bi significantly enhances long-term stability. Furthermore, the CO32- ion exchange process occurs in various 2D Bi-containing precatalysts, which should be emphasized in further studies.

Enhancing Local CO2 Adsorption by L-histidine Incorporation for Selective Formate Production Over the Wide Potential Window

Electrochemical carbon dioxide reduction reaction (CO2 RR) to produce valuable chemicals is a promising pathway to alleviate the energy crisis and global warming issues. However, simultaneously achieving high Faradaic efficiency (FE) and current densities of CO2 RR in a wide potential range remains as a huge challenge for practical implements. Herein, we demonstrate that incorporating bismuth-based (BH) catalysts with L-histidine, a common amino acid molecule of proteins, is an effective strategy to overcome the inherent trade-off between the activity and selectivity. Benefiting from the significantly enhanced CO2 adsorption capability and promoted electron-rich nature by L-histidine integrity, the BH catalyst exhibits excellent FEformate in the unprecedented wide potential windows (>90 % within -0.1--1.8 V and >95 % within -0.2--1.6 V versus reversible hydrogen electrode, RHE). Excellent CO2 RR performance can still be achieved under the low-concentration CO2 feeding (e.g., 20 vol.%). Besides, an extremely low onset potential of -0.05 VRHE (close to the theoretical thermodynamic potential of -0.02 VRHE ) was detected by in situ ultraviolet-visible (UV-Vis) measurements, together with stable operation over 50 h with preserved FEformate of ≈95 % and high partial current density of 326.2 mA cm-2 at -1.0 VRHE .

Smartphone-based photoelectrochemical immunoassay for carcinoembryonic antigen based on BiOCl/CuBi2O4 heterojunction

Photoelectrochemical (PEC) immunoassay has been widely developed for biomarker detection, but most include heavy and expensive instruments that are not suited for portable and on-site detection. In this work, the PEC immunoassay platform for mobile phones was reported for flexible, rapid, low-cost detection of carcinoembryonic antigen (CEA). The PEC detection platform was successfully composed of disposable screen-printed carbon electrodes, a micro-electrochemical workstation, a flashlight (the excitation light source), and a smartphone with a companion software with a micro-electrochemical workstation for rapid and on-site detection of target biomarkers. In this portable smartphone-based PEC system, the S-scheme heterojunction BiOCl/CuBi2O4 was effectively excited due to the efficient electron transfer rate and excellent photocurrent response under visible light. Specifically, the sandwich-type immunoreaction for capturing target biomarkers introduced alkaline phosphatase (ALP) labeled gold nanoparticles (Au NPs). The addition of CEA increased the ascorbic acid (AA) content and enhanced the photocurrent. The proposed immunoassay presented a good linear with the logarithm of CEA concentrations range within 0.01-40 ng mL-1, and the detection limit of 3.5 pg mL-1 (S/N = 3). Therefore, the portable detection platform offered an implementable approach to the development of miniaturized and portable photoelectrochemical detectors and on-site detection technology.

Anion Exchange Facilitates the In Situ Construction of Bi/BiO Interfaces for Enhanced Electrochemical CO2 -to-Formate Conversion Over a Wide Potential Window

Electrochemical reduction of CO2 (CO2 RR) into value-added products is a promising strategy to reduce energy consumption and solve environmental issues. Formic acid/formate is one of the high-value, easy-to-collect, and economically viable products. Herein, the reconstructed Bi2 O2 CO3 nanosheets (BOCR NSs) are synthesized by an in situ electrochemical anion exchange strategy from Bi2 O2 SO4 as a pre-catalyst. The BOCR NSs achieve a high formate Faradaic efficiency (FEformate ) of 95.7% at -1.1 V versus reversible hydrogen electrode (vs. RHE), and maintain FEformate above 90% in a wide potential range from -0.8 to -1.5 V in H-cell. The in situ spectroscopic studies reveal that the obtained BOCR NSs undergo the anion exchange from Bi2 O2 SO4 to Bi2 O2 CO3 and further promote the self-reduction to metallic Bi to construct Bi/BiO active site to facilitate the formation of OCHO* intermediate. This result demonstrates anion exchange strategy can be used to rational design high performance of the catalysts toward CO2 RR.

Applications of Metal-Organic Frameworks and Their Derivatives in Electrochemical CO2 Reduction

Electrochemically reducing CO2 to more reduced chemical species is a promising way that not only enables the conversion of intermittent energy resources to stable fuels, but also helps to build a closed-loop anthropogenic carbon cycle. Among various electrocatalysts for electrochemical CO2 reduction, multifunctional metal-organic frameworks (MOFs) have been employed as highly efficient and selective heterogeneous electrocatalysts due to their ultrahigh porosity and topologically diverse structures. Up to now, great progress has been achieved in the design and synthesis of highly active and selective MOF-related catalysts for electrochemical CO2 reduction reaction (CO2RR), and their corresponding reaction mechanisms have been thoroughly studied. In this review, we summarize the recent progress of applying MOFs and their derivatives in CO2RR, with a focus on the design strategies for electrocatalysts and electrolyzers. We first discussed the reaction mechanisms for different CO2RR products and introduced the commonly applied electrolyzer configurations in the current CO2RR system. Then, an overview of several categories of products (CO, HCOOH, CH4, CH3OH, and multi-carbon chemicals) generated from MOFs or their derivatives via CO2RR was discussed. Finally, we offer some insights and perspectives for the future development of MOFs and their derivatives in electrochemical CO2 reduction. We aim to provide new insights into this field and further guide future research for large-scale applications.

Enhanced photocatalytic reduction of CO2 on BiOBr under synergistic effect of Zn doping and induced oxygen vacancy generation

In this work, different BiOBr powders (without and with Zn doping) were prepared. Their specific properties and photocatalytic performance were studied. Zn doped BiOBr showed higher carrier transportation ability, beneficial to high performance photocatalysis. Further analysis and theoretical calculations unveiled that Zn doping resulted in more dispersive energy band structure with improved oxygen vacancy (O_V) generation due to lattice distortion. O_V acted as trap centers, playing dominant role in carrier transportation enhancement, which also synergized with more dispersive energy band due to Zn doping, improving carrier separation and transfer. Besides, Zn doping would further strengthen trapping effect under O_V existence, stimulating synergistic enhancement to spatial charge separation and transfer with O_V. With synergy of Zn doping and O_V, Zn doped samples produced 1.75 times higher CH₄ generation during gas-solid photocatalytic reduction of CO₂ under visible light, testifying successful conducting of Zn doping improved photocatalytic capacity on BiOBr.

A Pair-Electrosynthesis for Formate at Ultra-Low Voltage Via Coupling of CO2 Reduction and Formaldehyde Oxidation

Formate can be synthesized electrochemically by CO₂ reduction reaction (CO₂RR) or formaldehyde oxidation reaction (FOR). The CO₂RR approach suffers from kinetic-sluggish oxygen evolution reaction at the anode. To this end, an electrochemical system combining cathodic CO₂RR with anodic FOR was developed, which enables the formate electrosynthesis at ultra-low voltage. Cathodic CO₂RR employing the BiOCl electrode in H-cell exhibited formate Faradaic efficiency (FE) higher than 90% within a wide potential range from - 0.48 to - 1.32 V_RHE. In flow cell, the current density of 100 mA cm^-2 was achieved at - 0.67 V_RHE. The anodic FOR using the Cu₂O electrode displayed a low onset potential of - 0.13 V_RHE and nearly 100% formate and H₂ selectivity from 0.05 to 0.35 V_RHE. The CO₂RR and FOR were constructed in a flow cell through membrane electrode assembly for the electrosynthesis of formate, where the CO₂RR//FOR delivered an enhanced current density of 100 mA cm^-2 at 0.86 V. This work provides a promising pair-electrosynthesis of value-added chemicals with high FE and low energy consumption.

MOF-Transformed In2O3-x@C Nanocorn Electrocatalyst for Efficient CO2 Reduction to HCOOH

For electrochemical CO2 reduction to HCOOH, an ongoing challenge is to design energy efficient electrocatalysts that can deliver a high HCOOH current density (JHCOOH) at a low overpotential. Indium oxide is good HCOOH production catalyst but with low conductivity. In this work, we report a unique corn design of In2O3-x@C nanocatalyst, wherein In2O3-x nanocube as the fine grains dispersed uniformly on the carbon nanorod cob, resulting in the enhanced conductivity. Excellent performance is achieved with 84% Faradaic efficiency (FE) and 11 mA cm-2 JHCOOH at a low potential of - 0.4 V versus RHE. At the current density of 100 mA cm-2, the applied potential remained stable for more than 120 h with the FE above 90%. Density functional theory calculations reveal that the abundant oxygen vacancy in In2O3-x has exposed more In3+ sites with activated electroactivity, which facilitates the formation of HCOO* intermediate. Operando X-ray absorption spectroscopy also confirms In3+ as the active site and the key intermediate of HCOO* during the process of CO2 reduction to HCOOH.