Fundamental Understanding and Optimization Strategies for Dual-Ion Batteries: A Review

Direct Regeneration of Spent Lithium-Ion Battery Cathodes: From Theoretical Study to Production Practice

Direct regeneration method has been widely concerned by researchers in the field of battery recycling because of its advantages of in situ regeneration, short process and less pollutant emission. In this review, we firstly analyze the primary causes for the failure of three representative battery cathodes (lithium iron phosphate, layered lithium transition metal oxide and lithium cobalt oxide), targeting at illustrating their underlying regeneration mechanism and applicability. Efficient stripping of material from the collector to obtain pure cathode material has become a first challenge in recycling, for which we report several pretreatment methods currently available for subsequent regeneration processes. We review and discuss emphatically the research progress of five direct regeneration methods, including solid-state sintering, hydrothermal, eutectic molten salt, electrochemical and chemical lithiation methods. Finally, the application of direct regeneration technology in production practice is introduced, the problems exposed at the early stage of the industrialization of direct regeneration technology are revealed, and the prospect of future large-scale commercial production is proposed. It is hoped that this review will give readers a comprehensive and basic understanding of direct regeneration methods for used lithium-ion batteries and promote the industrial application of direct regeneration technology.

Kinetic-Thermodynamic Promotion Engineering toward High-Density Hierarchical and Zn-Doping Activity-Enhancing ZnNiO@CF for High-Capacity Desalination

Despite the promising potential of transition metal oxides (TMOs) as capacitive deionization (CDI) electrodes, the actual capacity of TMOs electrodes for sodium storage is significantly lower than the theoretical capacity, posing a major obstacle. Herein, we prepared the kinetically favorable ZnxNi1 - xO electrode in situ growth on carbon felt (ZnxNi1 - xO@CF) through constraining the rate of OH- generation in the hydrothermal method. ZnxNi1 - xO@CF exhibited a high-density hierarchical nanosheet structure with three-dimensional open pores, benefitting the ion transport/electron transfer. And tuning the moderate amount of redox-inert Zn-doping can enhance surface electroactive sites, actual activity of redox-active Ni species, and lower adsorption energy, promoting the adsorption kinetic and thermodynamic of the Zn0.2Ni0.8O@CF. Benefitting from the kinetic-thermodynamic facilitation mechanism, Zn0.2Ni0.8O@CF achieved ultrahigh desalination capacity (128.9 mgNaCl g-1), ultra-low energy consumption (0.164 kW h kgNaCl-1), high salt removal rate (1.21 mgNaCl g-1 min-1), and good cyclability. The thermodynamic facilitation and Na+ intercalation mechanism of Zn0.2Ni0.8O@CF are identified by the density functional theory calculations and electrochemical quartz crystal microbalance with dissipation monitoring, respectively. This research provides new insights into controlling electrochemically favorable morphology and demonstrates that Zn-doping, which is redox-inert, is essential for enhancing the electrochemical performance of CDI electrodes.

Electrochemical intercalation of anions into graphite: Fundamental aspects, material synthesis, and application to the cathode of dual-ion batteries

In this review, fundamental aspects of the electrochemical intercalation of anions into graphite have been first summarized, and then described the electrochemical preparation of covalent-type GICs and application of graphite as the cathode of dual-ion battery. Electrochemical overoxidation of anion GICs provides graphite oxide and covalent-fluorine GICs, which are key functional materials for various applications including energy storage devices. The reaction conditions to obtain fully oxidized graphite has been mentioned. Concerning the application of graphite for the cathode of dual-ion battery, it stably delivers about 110 mA h g-1 of reversible capacity in usual organic electrolyte solutions. The combination of anion and solvent as well as the concentration of the anions in the electrolyte solutions greatly affect the performance of graphite cathode such as oxidation potential, rate capability, cycling properties, etc. The interfacial phenomenon is also important, and fundamental studies of charge transfer resistance, anion diffusion coefficient, and surface film formation behavior have also been summarized. The use of smaller anions, such as AlCl4 - , Br- can increase the capacity of graphite cathode. Several efforts on the structural modification of graphite and development of electrolyte solutions in which graphite cathode delivers higher capacity were also described.

Textured Asymmetric Membrane Electrode Assemblies of Piezoelectric Phosphorene and Ti3C2Tx MXene Heterostructures for Enhanced Electrochemical Stability and Kinetics in LIBs

Black phosphorus with a superior theoretical capacity (2596 mAh g-1) and high conductivity is regarded as one of the powerful candidates for lithium-ion battery (LIB) anode materials, whereas the severe volume expansion and sluggish kinetics still impede its applications in LIBs. By contrast, the exfoliated two-dimensional phosphorene owns negligible volume variation, and its intrinsic piezoelectricity is considered to be beneficial to the Li-ion transfer kinetics, while its positive influence has not been discussed yet. Herein, a phosphorene/MXene heterostructure-textured nanopiezocomposite is proposed with even phosphorene distribution and enhanced piezo-electrochemical coupling as an applicable free-standing asymmetric membrane electrode beyond the skin effect for enhanced Li-ion storage. The experimental and simulation analysis reveals that the embedded phosphorene nanosheets not only provide abundant active sites for Li-ions, but also endow the nanocomposite with favorable piezoelectricity, thus promoting the Li-ion transfer kinetics by generating the piezoelectric field serving as an extra accelerator. By waltzing with the MXene framework, the optimized electrode exhibits enhanced kinetics and stability, achieving stable cycling performances for 1,000 cycles at 2 A g-1, and delivering a high reversible capacity of 524 mAh g-1 at - 20 ℃, indicating the positive influence of the structural merits of self-assembled nanopiezocomposites on promoting stability and kinetics.

Recent Advances of Transition Metal Dichalcogenides-Based Materials for Energy Storage Devices, in View of Monovalent to Divalent Ions

The fast growth of electrochemical energy storage (EES) systems necessitates using innovative, high-performance electrode materials. Among the various EES devices, rechargeable batteries (RBs) with potential features like high energy density and extensive lifetime are well suited to meet rapidly increasing energy demands. Layered transition metal dichalcogenides (TMDs), typical two dimensional (2D) nanomaterial, are considered auspicious materials for RBs because of their layered structures and large specific surface areas (SSA) that benefit quick ion transportation. This review summarizes and highlights recent advances in TMDs with improved performance for various RBs. Through novel engineering and functionalization used for high-performance RBs, we briefly discuss the properties, characterizations, and electrochemistry phenomena of TMDs. We summarised that engineering with multiple techniques, like nanocomposites used for TMDs receives special attention. In conclusion, the recent issues and promising upcoming research openings for developing TMDs-based electrodes for RBs are discussed.

Advances in phase change materials and nanomaterials for applications in thermal energy storage

Phase-changing materials are nowadays getting global attention on account of their ability to store excess energy. Solar thermal energy can be stored in phase changing material (PCM) in the forms of latent and sensible heat. The stored energy can be suitably utilized for other applications such as space heating and cooling, water heating, and further industrial processing where low-temperature heat energy is required. The presented work attempts to evaluate past, present, and future trends in the development of energy storage materials and their encapsulation techniques for efficient utilization of the available energy. Hybrid PCM with nanoparticles has excellent potential to tailor thermo-physical properties and uplift the efficiency of energy storage systems. Synergistic use of PCM with nanomicromaterial can further improve the capacity of energy storage system along with the charging and discharging efficiencies of the system. Impacts of the size of particle, concentration ratio, and shape of particle have been studied to assess their effectiveness in enhancing storage efficiency of the systems. Waste heat recovered and stored in energy storage materials can undoubtedly improve the total energy availability of the source, thus enhancing the exergy efficiency with simultaneous reduction in the entropy generation rate. Core-shell nanoparticles can further improve the optical absorptance spectra towards an infrared region of thermal energy. Paraffin wax-based NEPCMs with graphene nanoplatelets achieve 2.14 W/(m·K) thermal conductivity, enabling faster and more efficient heat transmission and lowering charging and discharging times for thermal storage devices.

Unlocking the Design Paradigm of In-Plane Heterojunction with Built-in Bifunctional Anion Vacancy for Unexpectedly Fast Sodium Storage

Transition metal chalcogenide (TMD) electrodes in sodium-ion batteries exhibit intrinsic shortcomings such as sluggish reaction kinetics, unstable conversion thermodynamics, and substantial volumetric strain effects, which lead to electrochemical failure. This report unlocks a design paradigm of VSe2- x /C in-plane heterojunction with built-in anion vacancy, achieved through an in situ functionalization and self-limited growth approach. Theoretical and experimental investigations reveal the bifunctional role of the Se vacancy in enhancing the ion diffusion kinetics and the structural thermodynamics of Nax VSe2 active phases. Moreover, this in-plane heterostructure facilitates complete face contact between the two components and tight interfacial conductive contact between the conversion phases, resulting in enhanced reaction reversibility. The VSe2- x /C heterojunction electrode exhibits remarkable sodium-ion storage performance, retaining specific capacities of 448.7 and 424.9 mAh g-1 after 1000 cycles at current densities of 5 and 10 A g-1 , respectively. Moreover, it exhibits a high specific capacity of 353.1 mAh g-1 even under the demanding condition of 100 A g-1 , surpassing most previous achievements. The proposed strategy can be extended to other V5 S8- x and V2 O5- x -based heterojunctions, marking a conceptual breakthrough in advanced electrode design for constructing high-performance sodium-ion batteries.

Stable organic polymer anode for high rate and fast charge sodium based dual-ion battery

Considering the extensive resources, flexible structural designability, and abundant active sites, organic electrodes have been considered as the ideal sodium storage materials. However, organic materials generally face the limitations of unstable and dissolved characteristic, leading to a poor cyclic stability. In this work, we proposed a carbon nanotube (CNT) modified polyimide as the anode for sodium-based dual-ion battery (SDIB). The polyimide remains well the structure and morphology of monomer with a stable conjugated structure and high degree of crystallinity, effectively enhancing the electrochemical performance of the SDIBs. Also, the cooperation with CNT particularly improves the ion conductivity of the anode and advances the rate performance. Combined with an ionic liquid electrolyte, the constructed dual-ion battery exhibits excellent rate capability, high specific discharge capacity and stable cycling performance. It delivers a specific discharge capacity of 119.3 mA h g-1 at 0.2 C (1 C=100 mA g-1 ) and still has a specific discharge capacity of 82.3 mA h g-1 even after 1000 cycles at 10 C. Besides, the system displays a low self-discharge rate and stable fast charging performance, which is expected to be applied in the large-scale electrochemical energy storage devices and inspire the future development of SDIBs.

Structural Isomers: Small Change with Big Difference in Anion Storage

Organic electrode materials are promising for batteries. However, the reported organic electrodes are often facing the challenges of low specific capacity, low voltage, poor rate capability and vague charge storage mechanisms, etc. Isomers are good platform to investigate the charge storage mechanisms and enhance the performance of batteries, which, however, have not been focused in batteries. Herein, two isomers are reported for batteries. As a result, the isomer tetrathiafulvalene (TTF) could store two monovalent anions reversibly, deriving an average discharge voltage of 1.05 V and a specific capacity of 220 mAh g-1 at a current density of 2 C. On the other hand, the other isomer tetrathianaphthalene could only reversibly store one monovalent anion and upon further oxidation, it would undergo an irreversible solid-state molecular rearrangement to TTF. The molecular rearrangement was confirmed by electrochemical performances, X-ray diffraction patterns, nuclear magnetic resonance spectra, and 1H detected heteronuclear multiple bond correlation spectra. These results suggested the small structural change could lead to a big difference in anion storage, and we hope this work will stimulate more attention to the structural design for boosting the performance of organic batteries.

Zinc-Bromine Rechargeable Batteries: From Device Configuration, Electrochemistry, Material to Performance Evaluation

Zinc-bromine rechargeable batteries (ZBRBs) are one of the most powerful candidates for next-generation energy storage due to their potentially lower material cost, deep discharge capability, non-flammable electrolytes, relatively long lifetime and good reversibility. However, many opportunities remain to improve the efficiency and stability of these batteries for long-life operation. Here, we discuss the device configurations, working mechanisms and performance evaluation of ZBRBs. Both non-flow (static) and flow-type cells are highlighted in detail in this review. The fundamental electrochemical aspects, including the key challenges and promising solutions, are discussed, with particular attention paid to zinc and bromine half-cells, as their performance plays a critical role in determining the electrochemical performance of the battery system. The following sections examine the key performance metrics of ZBRBs and assessment methods using various ex situ and in situ/operando techniques. The review concludes with insights into future developments and prospects for high-performance ZBRBs.

Trimming the Degrees of Freedom via a K+ Flux Rectifier for Safe and Long-Life Potassium-Ion Batteries

High degrees of freedom (DOF) for K+ movement in the electrolytes is desirable, because the resulting high ionic conductivity helps improve potassium-ion batteries, yet requiring support from highly free and flammable organic solvent molecules, seriously affecting battery safety. Here, we develop a K+ flux rectifier to trim K ion's DOF to 1 and improve electrochemical properties. Although the ionic conductivity is compromised in the K+ flux rectifier, the overall electrochemical performance of PIBs was improved. An oxidation stability improvement from 4.0 to 5.9 V was realized, and the formation of dendrites and the dissolution of organic cathodes were inhibited. Consequently, the K||K cells continuously cycled over 3,700 h; K||Cu cells operated stably over 800 cycles with the Coulombic efficiency exceeding 99%; and K||graphite cells exhibited high-capacity retention over 74.7% after 1,500 cycles. Moreover, the 3,4,9,10-perylenetetracarboxylic diimide organic cathodes operated for more than 2,100 cycles and reached year-scale-cycling time. We fabricated a 2.18 Ah pouch cell with no significant capacity fading observed after 100 cycles.

Improvement of Hybrid Electrode Material Synthesis for Energy Accumulators Based on Carbon Nanotubes and Porous Structures

Carbon materials are promising for use as electrodes for supercapacitors and lithium-ion batteries due to a number of properties, such as non-toxicity, high specific surface area, good electronic conductivity, chemical inertness, and a wide operating temperature range. Carbon-based electrodes, with their characteristic high specific power and good cyclic stability, can be used for a new generation of consumer electronics, biomedical devices and hybrid electric vehicles. However, most carbon materials, due to their low electrical conductivity and insufficient diffusion of electrolyte ions in complex micropores, have energy density limitations in these devices due to insufficient number of pores for electrolyte diffusion. This work focuses on the optimization of a hybrid material based on porous carbon and carbon nanotubes by mechanical mixing. The purpose of this work is to gain new knowledge about the effect of hybrid material composition on its specific capacitance. The material for the study is taken on the basis of porous carbon and carbon nanotubes. Electrodes made of this hybrid material were taken as an object of research. Porous carbon or nitrogen-containing porous carbon (combined with single-, double-, or multi-layer carbon nanotubes (single-layer carbon nanotubes, bilayer carbon nanotubes or multilayer carbon nanotubes) were used to create the hybrid material. The effect of catalytic chemical vapor deposition synthesis parameters, such as flow rate and methane-to-hydrogen ratio, as well as the type of catalytic system on the multilayer carbon nanotubes structure was investigated. Two types of catalysts based on Mo₁₂O₂₈ (μ₂-OH)₁₂{Co(H₂O)₃}₄ were prepared for the synthesis of multilayer carbon nanotubes by precipitation and combustion. The resulting carbon materials were tested as electrodes for supercapacitors and lithium ion intercalation. Electrodes based on nitrogen-containing porous carbon/carbon nanotubes 95:5% were found to be the most efficient compared to nitrogen-doped porous carbon by 10%. Carbon nanotubes, bilayer carbon nanotubes and multilayer carbon nanotubes synthesized using the catalyst obtained by deposition were selected as additives for the hybrid material. The hybrid materials were obtained by mechanical mixing and dispersion in an aqueous solution followed by lyophilization to remove water. When optimizing the ratio of the hybrid material components, the most effective porous carbon:carbon nanotubes component ratio was determined.