Production and characterisation of adsorbents synthesised by hydrothermal carbonisation of biomass wastes

The bio-adsorption competence of tailor made lemon grass adsorbents on oils: An in-vitro approach

The oil contamination in aquatic system is considered as most serious environmental issues and identifying a suitable ecofriendly solution for this oil pollution management is critical. Hence, this research was designed to evaluate the oils (petrol, diesel, engine oil, and crude oil) adsorptive features through raw lemon grass adsorbent, physically/chemically treated adsorbents. Initially, such raw and treated adsorbents were characterized by Scanning Electron Microscope (SEM), Fourier transform infrared spectroscopy (FTIR), and Energy-Dispersive X-ray Spectroscopy (EDS) analysis. These characterization techniques revealed that the lemon grass adsorbent had considerable level of pollutant adsorption potentials owing to porous morphological structure, active functional groups and pollutants interaction with chemical elements. The physically treated adsorbent exhibited better adsorption characteristics than others. Accordingly, the petrol adsorption potential of raw adsorbent, physically treated and chemically treated ones was discovered as their weight incremented up to 2.0, 3.0, and 1.5 times their initial weight, respectively. Similarly, the weight of raw form, physically and chemically treated ones on diesel had increased significantly, up to 2.5 times, 4.0 times, and 2.0 times, respectively. It was evaluated that the weight of these tested adsorbents on engine oil incremented by 3.5, 5.0, and 3.0 times their initial weight, while on crude oil these incremented by 4.0, 6.0, and 4.0 times their initial weight respectively. When the media are compared, it's indeed evident about absorption which is preferred as follows: Crude oil, engine oil, diesel, and petrol. The physically treated lemon grass adsorbent showed maximum adsorption and retention potential than others. The kinetic study reveals that the pseudo second order kinetics is the best fit for the adsorption of oil with R² value of 0.99.

Hydrochars produced by hydrothermal carbonisation of seaweed, coconut shell and oak: effect of processing temperature on physicochemical adsorbent characteristics

The present study addresses the production of hydrochars from brown seaweed (Fucus serratus) (FS-HCs), coconut shell (CS-HCs), and oak (Oak-HCs) as potential adsorbents using hydrothermal carbonisation (HTC). The effect of HTC processing temperature on the physicochemical adsorbent characteristics of the hydrochars is investigated at different temperatures (200, 220, 250 °C) using a hydrothermal batch reactor. Increasing HTC temperature causes the formation of many spheres in CS-HCs and Oak-HCs, increasing their porosity, except FS-HCs. The surface area of the hydrochars increases with increasing HTC temperature; 10.93–12.78 m2/g for FS-HCs, 2.18–21.94 m2/g for CS-HCs, except for Oak-HCs which decreases from 4.89 to 3.09 m2/g. Increasing HTC temperature decreases volatile matter content in the hydrochars, increases fixed carbon content, and decreases H/C ratio (except for FS-HCs) and O/C ratio of the hydrochars. For all the hydrochars, increasing the HTC temperature results in a slight decrease in zeta potential magnitude, with negatively charged surfaces, making them potential adsorbents for cationic pollutants. The study confirms that the HTC process improves key chemical and physical characteristics of the hydrochars compared to the original biomass, and that the physicochemical adsorbent characteristics are enhanced as the processing temperature increases.

Kinetic and isotherm insights of Diclofenac removal by sludge derived hydrochar

Recently, hydrothermal carbonization emerges as the most viable option for the management of solid waste with high moisture content. Sludge derived hydrochar is used as an adsorbent for emerging contaminants or micro-pollutants in the domain of sustainability. Current study demonstrates the KOH activation of hydrochar produced from paper board mill sludge and evaluates its removal potential of a Non-steroidal anti-inflammatory drug, Diclofenac from aqueous solution. The activated hydrochars exhibited porous, spherical micro-structures with higher fraction of oxygenated functional groups paving way for the efficient adsorption of Diclofenac. The effect of initial Diclofenac concentration and contact time was ascertained using adsorption kinetics and isotherms. The adsorption kinetics exhibited second-order reaction for all adsorbents indicating higher coefficient of determination (R² > 0.9). The Diclofenac adsorption on hydrochars followed Langmuir isotherm model with the post-activated hydrochar recording a highest adsorption capacity of 37.23 mg g⁻¹ in 40 mg L⁻¹ initial Diclofenac concentration at 15 h equilibrium time.

Can biochar and hydrochar be used as sustainable catalyst for persulfate activation?

Over the past decade, there has been a surge of interest in using char (hydrochar or biochar) derived from biomass as persulfate (PS, either peroxymonosulfate or peroxydisulfate) activator for anthropogenic pollutants removal. While extensive investigation showed that char could be used as a PS activator, its sustainability over prolonged application is equivocal. This review provides an assessment of the knowledge gap related to the sustainability of char as a PS activator. The desirable char properties for PS activation are identified, include the high specific surface area and favorable surface chemistry. Various synthesis strategies to obtain the desirable properties during biomass pre-treatment, hydrochar and biochar synthesis, and char post-treatment are discussed. Thereafter, factors related to the sustainability of employing char as a PS activator for anthropogenic pollutants removal are critically evaluated. Among the critical factors include performance uncertainty, competing adsorption process, char stability during PS activation, biomass precursor variation, scalability, and toxic components in char. Finally, some potential research directions are provided. Fulfilling the sustainability factors will provide opportunity to employ char as an economical and efficient catalyst for sustainable environmental remediation.