Exopolysaccharides from microalgae: production, characterization, optimization and techno-economic assessment

Bicarbonate induced enhanced production of microalgal extracellular polymeric substance and its characterization

Chlorella vulgaris, a green microalga, produces extracellular polymeric substances (EPSs) that aid in microalgal self-settling and offer protection against physicochemical stresses. To develop an efficient bioprocess for EPS production, C. vulgaris was cultivated in modified Bold's Basal Medium with varying initial concentrations of sodium bicarbonate in photobioreactors. At 130 mM bicarbonate, higher biomass concentration of 1.60 ± 0.04 g/L and productivity of 0.19 ± 0.02 g/L/d were achieved after 8 days. A relatively higher EPS yield of 183 ± 2 mg/g biomass was obtained at 190 mM bicarbonate resulting in 5-fold increase over control. EPS promoted maximum microalgal auto-flocculation within 8 h in 190 mM bicarbonate and was identified as a glycoprotein with molecular weight of 1400 kDa. This innovative strategy of utilizing bicarbonate as a source of dissolved inorganic carbon not only enhances EPS production but also demonstrates a potentially scalable method for carbon dioxide capture from flue gases.

Mixotrophic Cultivation of Dunaliella tertiolecta in Cheese Whey Effluents to Enhance Biomass and Exopolysaccharides (EPS) Production: Biochemical and Functional Insights

The rapid growth of the dairy industry has resulted in a significant increase in the generation of effluents, which are characterized by a high organic content that poses environmental challenges. In alignment with sustainable practices and the principles of the circular economy, this study investigates the valorization of cheese whey (CW) effluents through the cultivation of the microalga Dunaliella tertiolecta under mixotrophic conditions. The research aims to utilize cheese whey effluents as a supplemental growth medium to enhance the production of algal biomass and extracellular polymeric substances (EPSs). The results reveal that CW facilitated a 37% improvement in D. tertiolecta growth and led to an approximately eight times greater biomass productivity compared to under photoautotrophic conditions, while the EPS production increased by 30%. Chemical and techno-functional analyses of the microalgal biomass and EPSs suggest promising applications as natural product additives for the food industry. Biomass derived from photoautotrophic culture demonstrated greater antioxidant activity and total polyphenols content. Additionally, the lipid profile revealed 16 distinct fatty acids. On the other hand, biomass from the mixotrophic culture exhibited higher protein levels and eight fatty acids, indicating the influence of the cultivation mode on the biochemical composition. Regarding the EPSs, mixotrophic cultivation resulted in elevated antioxidant activity and total polyphenols content, as well as higher protein and sugar levels. Furthermore, the EPSs produced under mixotrophic conditions exhibited superior techno-functional properties compared to those of the photoautotrophic culture, making them ideal candidates for use as alternative natural food additives.

Exopolysaccharide from marine microalgae belonging to the Glossomastix genus: fragile gel behavior and suspension stability

With the aim to find new polysaccharides of rheological interest with innovated properties, rhamnofucans produced as exopolysaccharides (EPS) in a photobioreactor (PBR) and an airlift bioreactor (ABR) by the marine microalgae Glossomastix sp. RCC3707 and RCC3688 were fully studied. Chemical characterizations have been conducted (UHPLC - MS HR). Analyses by size-exclusion chromatography (SEC) coupled online with a multiangle light scattering detector (MALS) and a differential refractive index detector showed the presence of large structures with molar masses higher than 106 g.mol-1. The rheological studies of these EPS solutions, conducted at different concentrations and salinities, have evidenced interesting and rare behavior characteristic of weak and fragile hydrogels i.e. gel behavior with very low elastic moduli (between 10-2 and 10 Pa) and yield stresses (between 10-2 and 2 Pa) according to the EPS source, concentration, and salinity. These results were confirmed by diffusing wave spectroscopy. Finally, as one of potential application, solutions of EPS from Glossomastix sp. have evidenced very good properties as anti-settling stabilizers, using microcrystalline cellulose particles as model, studied by multiple light scattering (MLS) with utilization in cosmetic or food industry. Compared to alginate solution with same viscosity for which sedimentation is observed over few hours, microalgae EPS leads to a stable suspension over few days.

Exopolysaccharides as bio-based rheology modifiers from microalgae produced on dairy industry waste: Towards a circular bioeconomy approach

The feasibility of exopolysaccharides (EPS) production from cheese whey using Chlorella vulgaris was investigated as an example of circular bioeconomy application. The effects of dairy waste utilization in EPS biosynthesis and rheological properties were evaluated, comparing with both control conditions and commercial xanthan gum (CXG). A twofold increase in yield, up to 0.32 g L-1, was observed when Chlorella vulgaris was used for EPS production from whey rather than conventional fertilizers. Additionally, the EPS produced using cheese whey exhibited superior pseudoplasticity in the 0.4-1.0 (w/v) range compared to the control. The EPS from the whey wastewater contained functional groups similar to those of CXG (82.7 %). Moreover, the solutions containing 1 % biopolymer showed rheological profiles similar to those of the 0.4 % CXG. The molecular weight averages predominantly fell within the range of 284 to 324 kDa, as deduced using diffusion NMR, an innovative and rapid determination method for estimating EPS size. The potential applications of EPS notably extend beyond the dairy industry, reaching diverse market sectors, and thereby enhancing the competitiveness of microalgal biorefineries while contributing to the achievement of Sustainable Development Goals.

Production of sustainable thermoplastic composites from waste nitrogen fertilizer-grown marine filamentous cyanobacterium Geitlerinema sp

The global demand for petroleum-derived plastics continues to increase, as does pollution caused by plastic consumption and landfilling plastic waste. Recycling waste plastics by thermomechanical molding may be advantageous, but it alone cannot address the challenges associated with plastic demand and its widespread pollution. A more sustainable and cleaner approach for recycling plastic waste could be to produce thermoplastic composite blends of waste plastic and biobased alternative materials such as marine algal biomass. In this study, Geitlerinema sp., a marine cyanobacterium, was cultivated with waste nitrogen fertilizer as a nitrogen source, resulting in phycocyanin content and biomass density of 6.5% and 0.7 g/L, respectively. The minimum and maximum tensile strengths of thermoplastic blends containing Geitlerinema sp. biomass, recycled glycerol plasticizer, and waste plastic were 0.29-23.2 MPa, respectively. The tensile strength and Young's modulus of thermoplastic composites decreased as the Geitlerinema sp. biomass concentration increased. Furthermore, thermal analysis revealed that thermoplastics containing Geitlerinema sp. biomass have lower thermal onset and biomass degradation temperatures than waste polyethylene. Nevertheless, 35-50% of Geitlerinema sp. biomass could be a sustainable biobased alternative feedstock for producing thermoplastic blends, making the recycling of waste plastics more sustainable and environmentally friendly.

Enhancing the production of PHA in Scenedesmus sp. by the addition of green synthesized nitrogen, phosphorus, and nitrogen-phosphorus-doped carbon dots

Plastic consumption has increased globally, and environmental issues associated with it have only gotten more severe; as a result, the search for environmentally friendly alternatives has intensified. Polyhydroxyalkanoates (PHA), as biopolymers produced by microalgae, might be an excellent option; however, large-scale production is a relevant barrier that hinders their application. Recently, innovative materials such as carbon dots (CDs) have been explored to enhance PHA production sustainably. This study added green synthesized multi-doped CDs to Scenedesmus sp. microalgae cultures to improve PHA production. Prickly pear was selected as the carbon precursor for the hydrothermally synthesized CDs doped with nitrogen, phosphorous, and nitrogen-phosphorous elements. CDs were characterized by different techniques, such as FTIR, SEM, ζ potential, UV-Vis, and XRD. They exhibited a semi-crystalline structure with high concentrations of carboxylic groups on their surface and other elements, such as copper and phosphorus. A medium without nitrogen and phosphorous was used as a control to compare CDs-enriched mediums. Cultures regarding biomass growth, carbohydrates, lipids, proteins, and PHA content were analyzed. The obtained results demonstrated that CDs-enriched cultures produced higher content of biomass and PHA; CDs-enriched cultures presented an increase of 26.9% in PHA concentration and an increase of 32% in terms of cell growth compared to the standard cultures.

A sulfated exopolysaccharide derived from Chlorella sp. exhibiting in vitro anti-α-D-Glucosidase activity

There is a great scientific curiosity to discover all environments sheltering microalgae, especially those with exceptional characteristics from coldest to hottest ones, the purpose remains to explore the potential of the native microalgae flora and the research for new bioactive compounds. This study aimed to isolate a polysaccharide-producing microalga from an extreme ecosystem and to evaluate its capacity to inhibit the α-D-glucosidase enzyme. Chlorella strain is isolated from hypersaline Lake in the Algerian desert. The exopolysaccharide extraction was performed by the concentration of free-cell supernatant in a rotary evaporator. The infrared analysis showed a characteristic footprint of carbohydrates with particular functional groups, such as sulfate. Gas chromatography-mass spectrometry has revealed a hetero-exopolysaccharide composed of galactose 35.75%, glucose 21.13%, xylose 16.81%, fructose 6.96%, arabinose 5.10%, and glucuronic acid 2.68%. The evaluation of the anti-hyperglycemic activity demonstrated a significant α-D-glucosidase inhibition of 80.94 ± 0.01% at 10 mg mL-1 with IC50 equal to 4.31 ± 0.20 mg mL-1. This study opens a vast prospect to use exopolysaccharides as natural nutraceutical or food additive.

Engineering strategies and applications of cyanobacterial exopolysaccharides: A review on past achievements and recent perspectives

Cyanobacteria are ideally suited for developing sustainable biological products but are underdeveloped due to a lack of genetic tools. Exopolysaccharide (EPS) is one of the essential bioproducts with widespread industrial applications. Despite their unique structural characteristics associated with distinct biological and physicochemical aspects, EPS from cyanobacteria has been underexplored. However, it is expected to accelerate in the near future due to the utilization of low-cost cyanobacterial platforms and readily available information on the structural data and specific features of these biopolymers. In recent years, cyanobacterial EPSs have attracted growing scientific attention due to their simple renewability, rheological characteristics, massive production, and potential uses in several biotechnology domains. This review focuses on the most recent research on potential new EPS producers and their distinct compositions responsible for novel biological activities. Additionally, nutritional and process parameters discovered recently for enhancing EPS production and engineering strategies applied currently to control the biosynthetic pathway for enhanced EPS production are critically highlighted. The process intensification of previously developed EPS extraction and purification processes from cyanobacterial biomass is also extensively explained. Furthermore, the newly reported biotechnological applications of cyanobacterial exopolysaccharides are also discussed.

Study of the polysaccharide production by the microalgae C-1509 Nannochloris sp. Naumann

Biologically active compounds, including polysaccharides isolated from microalgae, have various properties. Although Nannochloropsis spp. have the potential to produce secondary metabolites important for biotechnology, only a small part of the research on these microalgae has focused on their ability to produce polysaccharide fractions. This study aims to evaluate the physicochemical growth factors of Nannochloropsis spp. microalgae, which ensure the maximum accumulation of polysaccharides, as well as to optimize the parameters of polysaccharide extraction. The optimal nutrient medium composition was selected to maximize biomass and polysaccharide accumulation. The significance of selecting the extraction module and extraction temperature regime, as well as the cultivation conditions (temperature and active acidity value) is emphasized. Important chemical components of polysaccharides responsible for their biological activity were identified.

Characterization and anticancer effects of extracellular polysaccharide from DHA-producing microalga Crypthecodinium sp. SUN

The Characterization and anticancer effects of extracellular polysaccharide (EPS) from DHA-producing microalga Crypthecodinium sp. SUN were studied in the present research. Results showed that EPS from C. sp. SUN have a molecular weight of 1.118 × 106 g/mol. EPS significantly inhibited the proliferation and migration of LA795 lung adenocarcinoma cells, and the apoptosis rate decreased in a concentration-dependent manner, reached 52 % at 15 mg/mL. C. sp. SUN EPS also significantly decreased reactive oxygen species (ROS) level by over 50 %, superoxide dismutase (SOD) activity by 76 %, and catalase (CAT) activity by 34 % at 10 mg/mL, indicating that EPS may inhibit tumor cell growth instead of killing tumor cells. Additionally, C. sp. SUN EPS suppressed cell proliferation by downregulating the expression of adhesion proteins and cyclin D1 in LA795 cells. In vivo experiments demonstrated that C. sp. SUN EPS inhibited the growth of lung adenocarcinoma tumors without affecting the normal body weight of nude mice. Collectively, the present study showed that C. sp. SUN EPS could be a potential substance for cancer treatment, which provided a research basis for future study on EPS and expanded the application of Crypthecodinium.

Production and characterization of exopolysaccharides from salinity-induced Auxenochlorella protothecoides and the analysis of anti-inflammatory activity

The set scenario of this work was to investigate the production, physicochemical characteristics, and anti-inflammatory activities of exopolysaccharides from salinity-induced Auxenochlorella protothecoides. The results demonstrated that 10 ‰ salinity manipulation endowed preferable exopolysaccharide production by A. protothecoides. Under this salinity stress, ACPEPS1A and ACPEPS2A were purified from exopolysaccharide production by anion chromatography and molecular exclusion chromatography. ACPEPS1A exhibited a molecular weight (Mw) of 132 kDa and mainly consisted of galactose. ACPEPS2A was a heteropolysaccharide with an Mw of 170 kDa and the main monosaccharides of galactose and rhamnose with separate molar percents of 42.41 % and 35.29 %, respectively. FTIR, ¹H and ¹³C NMR supported that monosaccharide components of ACPEPS1A and ACPEPS2A possessed both α- and β-configuration pyranose rings. Further evidence indicated that ACPEPS1A and ACPEPS2A could effectively inhibit the inflammatory response in lipopolysaccharide (LPS) induced RAW264.7 cells by quenching inflammatory factor levels such as ROS, iNOS, TNF-α, and IL-6. The potential anti-inflammatory possibilities were that the monosaccharides of ACPEPS1A and ACPEPS2A possessed higher affinity with receptors on the macrophage surface than LPS and hampered LPS-induced inflammation. The findings of this work would favor innovative applications of exopolysaccharides from microalgae in complementary medicines or functional foods.

Algal biorefinery culminating multiple value-added products: recent advances, emerging trends, opportunities, and challenges

Algal biorefinery is rising as a prominent solution to economically fulfill the escalating global requirement for nutrition, feed, fuel, and medicines. In recent years, scientific productiveness associated with microalgae-based studies has elaborated in multiplied aspects, while translation to the commercial level continues to be missing. The present microalgal biorefinery has a challenge in long-term viability due to escalated market price of algal-mediated biofuels and bioproducts. Advancements are required in a few aspects like improvement in algae processing, energy investment, and cost analysis of microalgae biorefinery. Therefore, it is essential to recognize the modern work by understanding the knowledge gaps and hotspots driving business scale up. The microalgae biorefinery integrated with energy-based products, bioactive and green compounds, focusing on a circular bioeconomy, is urgently needed. A detailed investigation of techno-economic analysis (TEA) and life cycle assessment (LCA) is important to increase the market value of algal products. This review discusses the valorization of algal biomass for the value-added application that holds a sustainable approach and cost-competitive algal biorefinery. The current industries, policies, technology transfer trends, challenges, and future economic outlook are discussed. This study is an overview through scientometric investigation attempt to describe the research development contributing to this rising field.

Microalgae Polysaccharides: An Alternative Source for Food Production and Sustainable Agriculture

Carbohydrates or polysaccharides are the main products derived from photosynthesis and carbon fixation in the Calvin cycle. Compared to other sources, polysaccharides derived from microalgae are safe, biocompatible, biodegradable, stable, and versatile. These polymeric macromolecules present complex biochemical structures according to each microalgal species. In addition, they exhibit emulsifying properties and biological characteristics that include antioxidant, anti-inflammatory, antitumor, and antimicrobial activities. Some microalgal species have a naturally high concentration of carbohydrates. Other species can adapt their metabolism to produce more sugars from changes in temperature and light, carbon source, macro and micronutrient limitations (mainly nitrogen), and saline stress. In addition to growing in adverse conditions, microalgae can use industrial effluents as an alternative source of nutrients. Microalgal polysaccharides are predominantly composed of pentose and hexose monosaccharide subunits with many glycosidic bonds. Microalgae polysaccharides can be structural constituents of the cell wall, energy stores, or protective polysaccharides and cell interaction. The industrial use of microalgae polysaccharides is on the rise. These microorganisms present rheological and biological properties, making them a promising candidate for application in the food industry and agriculture. Thus, microalgae polysaccharides are promising sustainable alternatives for potential applications in several sectors, and the choice of producing microalgal species depends on the required functional activity. In this context, this review article aims to provide an overview of microalgae technology for polysaccharide production, emphasizing its potential in the food, animal feed, and agriculture sector.

Recent Advances of Microalgae Exopolysaccharides for Application as Bioflocculants

Microalgae are used in flocculation processes because biopolymers are released into the culture medium. Microalgal cell growth under specific conditions (temperature, pH, luminosity, nutrients, and salinity) provides the production and release of exopolysaccharides (EPS). These biopolymers can be recovered from the medium for application as bioflocculants or used directly in cultivation as microalgae autoflocculants. The optimization of nutritional parameters, the control of process conditions, and the possibility of scaling up allow the production and industrial application of microalgal EPS. Therefore, this review addresses the potential use of EPS produced by microalgae in bioflocculation. The recovery, determination, and quantification techniques for these biopolymers are also addressed. Moreover, other technological applications of EPS are highlighted.