NMR solution spatial structure of ‘short’ scorpion insectotoxin I5 A

Advances in the exact nuclear Overhauser effect 2018-2022

The introduction of the exact nuclear Overhauser enhancement (eNOE) methodology to solution-state nuclear magnetic resonance (NMR) spectroscopy results in tighter distance restraints from NOEs than in convention analysis. These improved restraints allow for higher resolution in structure calculation and even the disentanglement of different conformations of macromolecules. While initial work primarily focused on technical development of the eNOE, structural studies aimed at the elucidation of spatial sampling in proteins and nucleic acids were published in parallel prior to 2018. The period of 2018-2022 saw a continued series of technical innovation, but also major applications addressing biological questions. Here, we review both aspects, covering topics from the implementation of non-uniform sampling of NOESY buildups, novel pulse sequences, adaption of the eNOE to solid-state NMR, advances in eNOE data analysis, and innovations in structural ensemble calculation, to applications to protein, RNA, and DNA structure elucidation.

Structural basis for functional diversity of animal toxins

The diversity of biological functions that are exerted by toxins from snake and scorpion venoms is associated with a limited number of structural frameworks. At present, one predominant basic fold has been observed among scorpion toxins whereas six folds have been found among snake toxins. Most toxin folds have the capacity to accept multiple insertions, deletions and mutations and to exert various recognition functions. We suggest that such folds may serve as guides to engineer new protein functions.

NMR structure and action on nicotinic acetylcholine receptors of water-soluble domain of human LYNX1

Discovery of proteins expressed in the central nervous system sharing the three-finger structure with snake α-neurotoxins provoked much interest to their role in brain functions. Prototoxin LYNX1, having homology both to Ly6 proteins and three-finger neurotoxins, is the first identified member of this family membrane-tethered by a GPI anchor, which considerably complicates in vitro studies. We report for the first time the NMR spatial structure for the water-soluble domain of human LYNX1 lacking a GPI anchor (ws-LYNX1) and its concentration-dependent activity on nicotinic acetylcholine receptors (nAChRs). At 5-30 μM, ws-LYNX1 competed with (125)I-α-bungarotoxin for binding to the acetylcholine-binding proteins (AChBPs) and to Torpedo nAChR. Exposure of Xenopus oocytes expressing α7 nAChRs to 1 μM ws-LYNX1 enhanced the response to acetylcholine, but no effect was detected on α4β2 and α3β2 nAChRs. Increasing ws-LYNX1 concentration to 10 μM caused a modest inhibition of these three nAChR subtypes. A common feature for ws-LYNX1 and LYNX1 is a decrease of nAChR sensitivity to high concentrations of acetylcholine. NMR and functional analysis both demonstrate that ws-LYNX1 is an appropriate model to shed light on the mechanism of LYNX1 action. Computer modeling, based on ws-LYNX1 NMR structure and AChBP x-ray structure, revealed a possible mode of ws-LYNX1 binding.

Improving NMR protein structure quality by Rosetta refinement: a molecular replacement study

The structure of human protein HSPC034 has been determined by both solution nuclear magnetic resonance (NMR) spectroscopy and X-ray crystallography. Refinement of the NMR structure ensemble, using a Rosetta protocol in the absence of NMR restraints, resulted in significant improvements not only in structure quality, but also in molecular replacement (MR) performance with the raw X-ray diffraction data using MOLREP and Phaser. This method has recently been shown to be generally applicable with improved MR performance demonstrated for eight NMR structures refined using Rosetta (Qian et al., Nature 2007;450:259-264). Additionally, NMR structures of HSPC034 calculated by standard methods that include NMR restraints have improvements in the RMSD to the crystal structure and MR performance in the order DYANA, CYANA, XPLOR-NIH, and CNS with explicit water refinement (CNSw). Further Rosetta refinement of the CNSw structures, perhaps due to more thorough conformational sampling and/or a superior force field, was capable of finding alternative low energy protein conformations that were equally consistent with the NMR data according to the Recall, Precision, and F-measure (RPF) scores. On further examination, the additional MR-performance shortfall for NMR refined structures as compared with the X-ray structure were attributed, in part, to crystal-packing effects, real structural differences, and inferior hydrogen bonding in the NMR structures. A good correlation between a decrease in the number of buried unsatisfied hydrogen-bond donors and improved MR performance demonstrates the importance of hydrogen-bond terms in the force field for improving NMR structures. The superior hydrogen-bond network in Rosetta-refined structures demonstrates that correct identification of hydrogen bonds should be a critical goal of NMR structure refinement. Inclusion of nonbivalent hydrogen bonds identified from Rosetta structures as additional restraints in the structure calculation results in NMR structures with improved MR performance.

Spatial structure and pH-dependent conformational diversity of dimeric transmembrane domain of the receptor tyrosine kinase EphA1

Eph receptors are found in a wide variety of cells in developing and mature tissues and represent the largest family of receptor tyrosine kinases, regulating cell shape, movements, and attachment. The receptor tyrosine kinases conduct biochemical signals across plasma membrane via lateral dimerization in which their transmembrane domains play an important role. Structural-dynamic properties of the homodimeric transmembrane domain of the EphA1 receptor were investigated with the aid of solution NMR in lipid bicelles and molecular dynamics in explicit lipid bilayer. EphA1 transmembrane segments associate in a right-handed parallel alpha-helical bundle, region (544-569)(2), through the N-terminal glycine zipper motif A(550)X(3)G(554)X(3)G(558). Under acidic conditions, the N terminus of the transmembrane helix is stabilized by an N-capping box formed by the uncharged carboxyl group of Glu(547), whereas its deprotonation results in a rearrangement of hydrogen bonds, fractional unfolding of the helix, and a realignment of the helix-helix packing with appearance of additional minor dimer conformation utilizing seemingly the C-terminal GG4-like dimerization motif A(560)X(3)G(564). This can be interpreted as the ability of the EphA1 receptor to adjust its response to ligand binding according to extracellular pH. The dependence of the pK(a) value of Glu(547) and the dimer conformational equilibrium on the lipid head charge suggests that both local environment and membrane surface potential can modulate dimerization and activation of the receptor. This makes the EphA1 receptor unique among the Eph family, implying its possible physiological role as an "extracellular pH sensor," and can have relevant physiological implications.

Divalent cation coordination and mode of membrane interaction in cyclotides: NMR spatial structure of ternary complex Kalata B7/Mn2+/DPC micelle

The cyclotides are the family of hydrophobic bioactive plant peptides, characterized by a circular protein backbone and three knot forming disulfide bonds. It is believed that membrane activity of the cyclotides underlines their antimicrobial, cytotoxic and hemolytic properties, but the specific interactions with divalent cations can be also involved. To assess the mode of membrane interaction and divalent cation coordination in cyclotides, the spatial structure of the Möbius cyclotide Kalata B7 from the African perennial plant Oldenlandia affinis was determined in the presence of anisotropic membrane mimetic (dodecylphosphocholine micelles). The model of peptide/cation/micelle complex was built using 5-doxylstearate and Mn2+ relaxation probes. Results show that the peptide binds to the micelle surface with relatively high affinity by two hydrophobic loops (loop 2 - Thr6-Leu7 and loop 5 - Trp19-Ile21). The partially hydrated divalent cation is coordinated by charged side-chain of Glu3, aromatic side chain of Tyr11 and free carbonyls of Thr4 and Thr9, and is located in direct contact with the polar head-groups of detergent. The comparison with data about other cyclotides indicates that divalent cation coordination is the invariant property of all cyclotides, but the mode of peptide/membrane interactions is varied. Probably, the specific cation/peptide interactions play a major, but yet not known, role in the biological activity of the cyclotides.

Conformation and mode of membrane interaction in cyclotides. Spatial structure of kalata B1 bound to a dodecylphosphocholine micelle

Cyclotides are a family of bioactive plant peptides that are characterized by a circular protein backbone and three conserved tightly packed disulfide bonds. The antimicrobial and hemolytic properties of cyclotides, along with the relative hydrophobicity of the peptides, point to the biological membrane as a target for cyclotides. To assess the membrane-induced conformation and orientation of cyclotides, the interaction of the Möbius cyclotide, kalata B1, from the African perennial plant Oldenlandia affinis, with dodecylphosphocholine micelles was studied using NMR spectroscopy. Under conditions where the cyclotide formed a well-defined complex with micelles, the spatial structure of kalata B1 was calculated from NOE and J couplings data, and the model for the peptide-micelle complex was built using 5- and 16-doxylstearate relaxation probes. The binding of divalent cations to the peptide-micelle complex was quantified by Mn2+ titration. The results show that the peptide binds to the micelle surface, with relatively high affinity, via two hydrophobic loops (loop 5, Trp19-Val21; and loop6, Leu27-Val29). The charged residues (Glu3 and Arg24), along with the cation-binding site (near Glu3) are segregated on the other side of the molecule and in contact with polar head groups of detergent. The spatial structure of kalata B1 is only slightly changed during incorporation into micelles and represents a distorted triple-stranded beta-sheet cross-linked by a cystine knot. Detailed structural analysis and comparison with other knottins revealed structural conservation of the two-disulfide motif in cyclic and acyclic peptides. The results thus obtained provide the first model for interaction of cyclotides with membranes and permit consideration of the cyclotides as membrane-active cationic antimicrobial peptides.

Functional expression of lepidopteran-selective neurotoxin in baculovirus: potential for effective pest management

Recombinant baculovirus expressing insect-selective neurotoxins derived from venomous animals are considered as an attractive alternative to chemical insecticides for efficient insect control agents. Recently we identified and characterized a novel lepidopteran-selective toxin, Buthus tamulus insect-selective toxin (ButaIT), having 37 amino acids and eight half cysteine residues from the venom of the South Indian red scorpion, Mesobuthus tamulus. The synthetic toxin gene containing the ButaIT sequence in frame to the bombyxin signal sequence was engineered into a polyhedrin positive Autographa californica nuclear polyhedrosis virus (AcMNPV) genome under the control of the p10 promoter. Toxin expression in the haemolymph of infected larvae of Heliothis virescens and also in an insect cell culture system was confirmed by western blot analysis using antibody raised against the GST-ButaIT fusion protein. The recombinant NPV (ButaIT-NPV) showed enhanced insecticidal activity on the larvae of Heliothis virescens as evidenced by a significant reduction in median survival time (ST50) and also a greater reduction in feeding damage as compared to the wild-type AcMNPV.

New binding site on common molecular scaffold provides HERG channel specificity of scorpion toxin BeKm-1

The scorpion toxin BeKm-1 is unique among a variety of known short scorpion toxins affecting potassium channels in its selective action on ether-a-go-go-related gene (ERG)-type channels. BeKm-1 shares the common molecular scaffold with other short scorpion toxins. The toxin spatial structure resolved by NMR consists of a short alpha-helix and a triple-stranded antiparallel beta-sheet. By toxin mutagenesis study we identified the residues that are important for the binding of BeKm-1 to the human ERG K+ (HERG) channel. The most critical residues (Tyr-11, Lys-18, Arg-20, Lys-23) are located in the alpha-helix and following loop whereas the "traditional" functional site of other short scorpion toxins is formed by residues from the beta-sheet. Thus the unique location of the binding site of BeKm-1 provides its specificity toward the HERG channel.

1H NMR study of robustoxin, the lethal neurotoxin from the funnel web spider Atrax robustus

Robustoxin, the lethal neurotoxin from the Sydney funnel web spider Atrax robustus, is a polypeptide of 42 residues cross-linked by four disulfide bonds. This paper describes the sequence-specific assignment of resonances in the 1H nuclear magnetic resonance spectrum of robustoxin in aqueous solution. Several broad backbone amide resonances were encountered in spectra recorded at 27 degrees C, making the assignments at that temperature incomplete. In spectra recorded at lower temperatures these amide resonances became sharper, but others that were sharp at 27 degrees C became broad, indicative of conformational averaging on the millisecond timescale for certain regions of the structure. Nevertheless, it was possible to establish that robustoxin contains a small, triple-stranded, antiparallel beta-sheet and several reverse turns, but no alpha-helix. These observations indicate that this toxin may adopt the inhibitor cystine knot structure found in polypeptides from a diverse range of species, including a number of spiders. Analysis of the pH dependence of the spectrum yielded pKa values for Tyr22 and Tyr25, one of the three carboxyl groups, and the Lys residues.

Purification and partial characterization of a 'short' insectotoxin-like peptide from the venom of the scorpion Parabuthus schlechteri

A disulfide-rich, low-molecular-mass toxin-like peptide has been isolated from Parabuthus schlechteri venom using gel filtration, ion exchange, and reversed phase chromatography. Partial characterization of this peptide reveals a relationship with four-disulfide bridge proteins belonging to the family of 'short' insectotoxins (44% residue identity). In recognition hereof, the peptide was named PBITx1 (sITx10). Our work also reports on the deduced sequences of two other 'short' insectotoxins from Buthus eupeus, I3 and I4, and it provides a consensus sequence and nomenclature for all known 'short' insectotoxins. Finally, sequence similarities with K+ channel blockers (charybdotoxin, kappa-conotoxin), and a Cl- channel blocker (chlorotoxin) are highlighted.

Purification and primary structure of low molecular mass peptides from scorpion (Buthus sindicus) venom

The primary structures of four low molecular mass peptides (Bs 6, 8, 10 and 14) from scorpion Buthus sindicus were elucidated via combination of Edman degradation and matrix-assisted laser desorption ionization mass spectrometry. Bs 8 and 14 are cysteine-rich, thermostable peptides composed of 35-36 residues with molecular weights of 3.7 and 3.4 kDa, respectively. These peptides show close sequence homologies (55-78%) with other scorpion chlorotoxin-like short-chain neurotoxins (SCNs) containing four intramolecular disulfide bridges. Despite the sequence variation between these two peptides (37% heterogeneity) their general structural organization is very similar as shown by their clearly related circular dichroism spectra. Furthermore, Bs6 is a minor component, composed of 38 residues (4.1 kDa) containing six half-cystine residues and having close sequence identities (40-80%) with charybdotoxin-like SCNs containing three disulfide bridges. The non-cysteinic, bacic and thermolabile Bs10 is composed of 34 amino acid residues (3.7 kDa), and belongs to a new class of peptides, with no sequence resemblance to any other so far reported sequence isolated from scorpions. Surprisingly, Bs10 shows some limited sequence analogy with oocyte zinc finger proteins. Results of these studies are discussed with respect to their structural similarities within the scorpion LCNs, SCNs and other biologically active peptides.

1H NMR structure of an antifungal gamma-thionin protein SIalpha1: similarity to scorpion toxins

The three-dimensional structure of the Sorghum bicolor seed protein gamma-thionin SIalpha1 has been determined by 2D 1H nuclear magnetic resonance (NMR) spectroscopy. The secondary structure of this 47-residue antifungal protein with four disulphide bridges consists of a three-stranded antiparallel sheet and one helix. The helix is tethered to the sheet by two disulphide bridges which link two successive turns of the helix to alternate residues i, i+2 in one strand. Possible binding sites for antifungal activity are discussed. The same fold has been observed previously in several scorpion toxins.

Characterization of a new family of toxin-like peptides from the venom of the scorpion Leiurus quinquestriatus hebraeus. 1H-NMR structure of leiuropeptide II

To extend our knowledge about the structural features of short scorpion toxins, the ion-exchange fractions obtained from Leiurus quinquestriatus hebraeus venom were investigated by plasma desorption mass spectrometry in order to select low molecular mass polypeptides. Three toxin-like peptides with molecular mass close to 3 kDa, named leiuropeptides I, II and III, were purified and found devoid of any significant toxicity against mammals and insects. Their amino acid sequences revealed a cysteine pattern analogous to that of short-chain scorpion toxins. The solution structure of leiuropeptide II was determined by 2D 1H-NMR spectroscopy and indicated the presence of a helix accommodating a proline, connected to a two-standard beta-sheet by three disulfide bonds. The overall fold of leiuropeptide II is found to be similar to that of leiurotoxin I, a 31-residue toxin present in the same scorpion venom which acts on K+ channels. In order to rationalize the absence of toxicity, the electrostatic potential of leiuropeptide II was compared to that of leiurotoxin I. The peptide is characterized by a large negative zone around Glu4, Asp5 and Asp8 residues, beginning in the neighbourhood of the beta-turn and extending along the helix. In the same area, leiurotoxin I exhibits a positive surface, around Arg6 and Arg13 basic residues, which are essential for its receptor affinity.

1H-NMR-derived secondary structure and the overall fold of the potent anti-mammal and anti-insect toxin III from the scorpion Leiurus quinquestriatus quinquestriatus

We describe the secondary structure and the overall fold of toxin III from the venom of the scorpion Leiurus quinquestriatus quinquestriatus determined using two-dimensional-1H-NMR spectroscopy. This protein, which contains 64 amino acids and 4 disulfide bridges, belongs to the long-chain toxin category and is highly toxic to both mammals and insects. The overall fold was determined on the basis of 1208 inter-proton-distance restraints derived from NOE measurements and 90 psi, phi dihedral-angle restraints derived from NOE connectivities and 3JNH-alphaH coupling constants using the HABAS program. This fold, which mainly consists of an alpha-helix packed against a small antiparallel three-stranded beta-sheet, and of several turns and loops, is similar to that of other long-chain scorpion toxins. Aromatic and non-polar residues form several patches on the surface of the protein which alternate with patches of charged and polar residues. Such a topology should be important in the interactions of toxin III with sodium channels in membranes. Two weakly constrained loops introduce some flexibility to the structure which could be related to the activity of this toxin. The central core of toxin III is compared with the cysteine-stabilized alpha beta motif (an alpha-helix connected to a beta-sheet through two disulfide bridges) found in insect defensins and plant thionins. Defensins and thionins are small proteins (approximately 40--50 amino acid residues) containing three or four disulfide bridges, respectively. This comparison confirms that the cysteine-stabilized alpha beta motif is a common core to a number of small proteins from different origins and having different activities.

Refined three-dimensional solution structure of insect defensin A

BACKGROUND

Insect defensin A is a basic 4 kDa protein secreted by Phormia terranovae larvae in response to bacterial challenges or injuries. Previous biological tests suggest that the bacterial cytoplasmic membrane is the target of defensin A. The structural study of this protein is the first step towards establishing a structure-activity relationship and forms the basis for understanding its antibiotic activity at the molecular level.

RESULTS

We describe a refined model of the three-dimensional structure of defensin A derived from an extensive analysis of 786 inter-proton nuclear Overhauser effects. The backbone fold involves an N-terminal loop and an alpha-helical fragment followed by an antiparallel beta-structure. The helix and the beta-structure are connected by two of the three disulphide bridges present in defensin A, forming a so-called 'cysteine-stabilized alpha beta' (CS alpha beta) motif. The N-terminal loop, which is locally well defined, can occupy different positions with respect to the other moieties of the molecule.

CONCLUSIONS

The CS alpha beta motif, which forms the core of the defensin A structure, appears to be a common organization for several families of small proteins with toxic properties. The distribution of amino acid side chains in the protein structure creates several hydrophobic or hydrophilic patches. This leads us to propose that the initial step in the action of positively charged defensin A molecules with cytoplasmic membranes may involve interactions with acidic phospholipids.

Solution structure of the variant-3 neurotoxin from Centruroides sculpturatus Ewing

The solution structure of the CsE-v3 neurotoxin from the venom of the North American scorpion Centruroides sculpturatus Ewing (CsE) has been determined by a hybrid refinement procedure that employed distance geometry and dynamical simulated annealing. Distance constraints deduced from the nuclear Overhauser effect spectroscopy data and torsion angle constraints deduced from the vicinal coupling constant data were used in the refinement procedure. A family of simulated annealing structures that showed no constraint violations was generated. The energy-minimized average structure exhibited root-mean-square deviations of 0.121 nm for the backbone and 0.182 nm for all atoms, with respect to this family. These studies confirm the previously qualitative NMR findings about the secondary structural features, viz. the presence of a short alpha-helix composed of residues 23-31 and an antiparallel beta-sheet composed of the strands of residues 1-5, 45-50 and 36-42. A cluster of aromatic ring systems is located on one side of the protein. The solution and crystal structures have similar overall features, but show some minor differences.

A reduced representation of proteins for use in restraint satisfaction calculations

A reduced representation of proteins has been developed for use in restraint satisfaction calculations with dynamic simulated annealing. Each amino acid residue is represented by up to four spherical virtual atoms. The virtual bonds and excluded volume of these atoms has been parameterized by analysis of 83 protein structures determined at high resolution by X-ray crystallography. The use of the new representation in NOE distance restraint satisfaction has been compared with the standard all-atom representation for the determination of the structures of crambin, echistatin, and protein G. Using the reduced representation, there is a 30-fold decrease in the computer time needed for generating a single structure, and up to a 20-fold decrease in the time taken to produce an acceptable structure compared to using the all-atom representation. The root mean square deviation between the mean structure obtained with all-atom and reduced representations is between 1.5 and 1.7 A for C alpha atoms. The new representation is adequate for describing the "low-resolution" features of protein structure such as the general fold and the positions of secondary structure elements. It can also provide an initial structure for more detailed refinement with the full all-atom representation.

Synthesis of charybdotoxin and of two N-terminal truncated analogues. Structural and functional characterisation

Charybdotoxin and two N-terminal truncated peptides, corresponding to the 2-37 and 7-37 sequences, were obtained by stepwise solid-phase synthesis using N alpha-t-butyloxycarbonyl and benzyltype side-chain protection. While this strategy was generally useful, the S-acetamidomethyl protecting group used for the six cysteines was not completely stable under HF treatment and its subsequent removal by mercury(II) treatment was neither complete nor devoid of side reactions. The completely deprotected native and truncated sequences were folded efficiently in the presence of glutathione and were finally purified by high-pressure liquid chromatography with overall yields of 4.0-5.0%. Each protein was characterised chemically, structurally and functionally. 1H-NMR spectroscopy was used and a complete assignment of all the protons of the three synthetic proteins was achieved. NMR data show that synthetic charybdotoxin is indistinguishable from the natural protein. The two truncated proteins contain the same elements of secondary structure and a similar overall three-dimensional structure, in agreement with circular dichroic measurements. The shortest analogue, however, may have local structural perturbations and/or higher flexibility. Biological activity on dog epithelial Ca(2+)-activated K+ channels and on rat brain synaptosomal voltage-dependent K+ channels show that synthetic charybdotoxin was as potent as the natural toxin on both channels. For both channels, deletion of the first amino acid, 5-oxoproline (pyroglutamic acid) decreased only slightly the potency of the inhibitor, while deletion of the entire 1-6 segment reduced potency much more. We conclude that the N-terminal region of charybdotoxin plays a functional role in tuning the toxin's biological activity but is not essential for the folding and stability of the structure. The structure of the shortest analogue represents an interesting example of how a well organised and stable alpha/beta fold can be engineered with only 31 amino acid residues.

Purification and characterization of chlorotoxin, a chloride channel ligand from the venom of the scorpion

We have previously demonstrated that the venom of the scorpion Leiurus quinquestriatus blocks small-conductance Cl- channels, derived from epithelial cells, when applied to the cytoplasmic surface. We have now purified to near homogeneity, and characterized, the component responsible for this blocking activity. It is a small basic peptide of 4,070 Da. The primary amino acid structure shows considerable homology to a class of previously described putative short insectotoxins. A brief characterization of the kinetics of Cl- channel block as well as a demonstration of toxicity to arthropods is also presented.

Expression of a gene encoding a scorpion insectotoxin peptide in yeast, bacteria and plants

The nucleotide sequence encoding the scorpion insectotoxin I5A was chemically synthesized and expressed in yeast, bacteria and tobacco. The I5A peptides produced in these organisms were purified using an immunoaffinity chromatography procedure. I5A produced using the bacterial secretion system was efficiently secreted and released into the culture medium. In contrast, only a trace amount of I5A was detected in bacterial cytosols when expressed from a direct expression vector, suggesting that I5A was unstable in bacterial cells. I5A secreted from yeast using an alpha-factor signal sequence was shown to have an N-terminal (Glu-Ala)2 extension, indicating incomplete processing of the secreted peptide by dipeptidyl aminopeptidase A. In tobacco, a nonsecreted form of the protein was produced. No measurable insect toxicity was observed when insect larvae were assayed, regardless of whether I5A was produced in yeast, bacteria or tobacco. The lack of toxicity is almost certainly the result of improper folding due to incorrect disulfide bond formation. The inability to produce a biologically active peptide must be overcome before scorpion toxins might be used for the genetic engineering of plants for insect resistance. The yeast and bacterial expression systems described here may be useful for further studies on the problem of expressing a biologically active peptide.

Linear and cyclic peptide analogues of the polypeptide cardiac stimulant, anthopleurin-A. 1H-NMR and biological activity studies

A loop corresponding to residues 8-17 in the polypeptide cardiac stimulant anthopleurin-A is known to be important for the cardiostimulant activity of this molecule. To investigate the activity and possible conformations of this loop in isolation, two synthetic peptides have been studied. The first corresponds to residues 6-20 of anthopleurin-A with Cys6 replaced by Thr, and the second to residues 6-21 of anthopleurin-A, with Thr21 replaced by Cys. The introduction of an additional cysteine in the latter peptide enabled an intramolecular disulfide to be formed between the N- and C-terminal residues. Both linear peptides and the disulfide-containing analogue lack the cardiostimulant and Na(+-)-channel binding activity in the parent molecule, anthopleurin-A, indicating that although the loop is important for the function of anthopleurin-A, other regions of the molecule must also be involved in activity. Assignments of the 1H-NMR spectra of both peptides are presented, and their pH and temperature dependences investigated. The results show that the amide protons of Gly5 and Asn11 (corresponding to Gly10 and Asn16 in anthopleurin-A) sample hydrogen-bonded conformations in solution. Based on these NMR data, two regions of non-random structure, encompassing residues 2-5 and 8-11, respectively, are proposed, and the possible involvement of such structures in the activity of anthopleurin-A is discussed.

Prediction of tertiary structures in 'scorpion-toxin' type proteins

In the three-dimensional architecture of macromolecules, the structural stability and proper folding manifest due to cooperative packing interaction of various segments. Hydrophobicity is the major factor stabilizing protein-protein associations. In the disulfide-containing proteins, S-S bonds are integral part of structural motifs and large part of the protein-folding problem can be reduced to identifying and understanding motifs and subdomains of these proteins. Identifying such a motif with S-S bonds in 'scorpion-toxin' type proteins, and from model-building studies, five tertiary structural models for these type of proteins can be proposed. These canonical structural models can be refined by regular minimum energy and computer simulation methods to arrive at the final tertiary structures. Such 'models' can be of considerable use i) in understanding the biochemical reaction mechanisms in the structure-function relationships, ii) structure determination by X-ray methods (molecular replacement method), iii) drug design etc.

Refined structure of charybdotoxin: common motifs in scorpion toxins and insect defensins

Conflicting three-dimensional structures of charybdotoxin (Chtx), a blocker of K+ channels, have been previously reported. A high-resolution model depicting the tertiary structure of Chtx has been obtained by DIANA and X-PLOR calculations from new proton nuclear magnetic resonance (NMR) data. The protein possesses a small triple-stranded antiparallel beta sheet linked to a short helix by two disulfides and to an extended fragment by one disulfide, respectively. This motif also exists in all known structures of scorpion toxins, irrespective of their size, sequence, and function. Strikingly, antibacterial insect defensins also adopt this folding pattern.

Three-dimensional structure of natural charybdotoxin in aqueous solution by 1H-NMR. Charybdotoxin possesses a structural motif found in other scorpion toxins

A 600-MHz proton NMR study of natural charybdotoxin, a toxin acting on K+ channels, is reported. The unambiguous sequential assignment of all the protons of the toxin was achieved. The analysis of NOEs and of backbone coupling constants showed the existence of an alpha-helix (residues 10-19) and of an antiparallel beta-sheet in the 26-35 part. Three-dimensional structures were generated by distance geometry, using a set of 114 interresidual calibrated constraints (63 sequential, 47 medium and long range, 4 hydrogen bonds) and 29 phi angles. These structures show that charybdotoxin is composed of a beta-sheet linked to an alpha-helix by two disulphide bridges and to an extended fragment by the third disulphide bridge. Comparison with the other known structures of long and short scorpion toxins shows that this structural motif is common to all these proteins.

Two-dimensional 1H nuclear magnetic resonance study of AaH IT, an anti-insect toxin from the scorpion Androctonus australis Hector. Sequential resonance assignments and folding of the polypeptide chain

Sequence-specific nuclear magnetic resonance assignments for the polypeptide backbone and for most of the amino acid side-chain protons, as well as the general folding of AaH IT, are described. AaH IT is a neurotoxin purified from the venom of the scorpion Androctonus australis Hector and is specifically active on the insect nervous system. The secondary structure and the hydrogen-bonding patterns in the regular secondary structure elements are deduced from nuclear Overhauser effects and the sequence locations of the slowly exchanging amide protons. The backbone folding is determined by distance geometry calculations with the DISMAN program. The regular secondary structure includes two and a half turns of alpha-helix running from residues 21 to 30 and a three-stranded antiparallel beta-sheet including peptides 3-5, 34-38, and 41-46. Two tight turns are present, one connecting the end of the alpha-helix to an external strand of the beta-sheet, i.e., turn 31-34, and another connecting this same strand to the central one, i.e., turn 38-41. These structure elements are very similar to the secondary structure reported in single crystals for either variant 3 from the scorpion Centruroides sculpturatus Ewing (CsE V3) or toxin II from the scorpion A. australis Hector (AaH II). The differences in the specificity of these related proteins, which are able to discriminate between mammalian and insect voltage-dependent sodium channels of excitable tissues, are most probably brought about by the position of the C-terminal peptide with regard to a hydrophobic surface common to all scorpion toxins examined thus far. This surface is made of an aromatic cluster that is surrounded by long hydrophobic side-chain residues, as well as the loops protruding out of it. Thus, the interaction of a given scorpion toxin with its receptor might well be governed by the presence of this solvent-exposed hydrophobic surface, whereas adjacent areas modulate the specificity of the interaction.

Tertiary structure of two-electron reduced Megasphaera elsdenii flavodoxin and some implications, as determined by two-dimensional 1H-NMR and restrained molecular dynamics

The tertiary structure of the non-crystallizable two-electron-reduced Megasphaera elsdenii flavodoxin (15 kDa, 137 amino acid residues) has been determined using nuclear Overhauser enhancement restraints extracted from two-dimensional 1H-NMR spectra. A tertiary structure satisfying the experimental restraints very well (maximum NOE violation of 66 pm) was obtained with use of restrained molecular dynamics, using 509 distance restraints (including one non-NOE) on a starting structure modeled from the crystal structure of one-electron-reduced Clostridium MP flavodoxin. The protein consists of a central parallel beta-sheet surrounded on both sides by two alpha-helices. The flavin is positioned at the periphery of the molecule. The tertiary structure of the protein is highly defined with the exception of the flavin. The latter is expected to result from performing the restrained molecular dynamics simulation without water molecules and without proper charges on the flavin. The flavin, including the phosphate, the ribityl side chain and the isoalloxazine ring, is solvent accessible under the experimental conditions used and evidenced by a two-dimensional amide exchange experiment. This accessibility is expected to be important in the redox potential regulation of the semiquinone/hydroquinone couple of the protein. The amide exchange against deuterons and several typical line shapes in the two-dimensional NMR spectra are consistent with the structure generated. The structure is discussed in detail.

Sequence-specific 1H-NMR assignment and conformation of proteolytic fragment 163-231 of bacterioopsin

Proteolytic fragment 163-231 of bacterioopsin was isolated from Halobacterium halobium purple membrane treated with NaBH4 and papain under nondenaturing conditions. Two-dimensional 1H-NMR spectra of (163-231)-bacterioopsin solubilized in chloroform/methanol (1:1), 0.1 M LiClO4 indicated the existence of one predominant conformation. Most of the resonances in the 1H-NMR spectra of (163-231)-bacterioopsin were assigned by two-dimensional techniques. Two extended right-handed alpha-helical regions Ala168-Ile191 and Asn202-Arg227 were identified on the basis of NOE connectivities and deuterium exchange rates. The N-terminal part of the peptide is flexible and the region of Gly192-Leu201 adopts a specific conformation. The protons of OH groups of Thr178, Ser183 and Ser214 slowly exchange with solvent, and side-chain conformations of these residues, as evaluated by NOE connectivities of OH protons, are optimal for the formation of hydrogen bonds between OH and backbone carbonyl groups.

Sequential 1H-NMR assignments and secondary structure of the sea anemone polypeptide anthopleurin-A

The sequence-specific assignment of resonances in the 500-MHz 1H-NMR spectrum of a cardioactive sea anemone polypeptide, anthopleurin-A, is described. The assignment procedure involved analysis of two-dimensional phase-sensitive multiple-quantum-filtered, double-quantum, homonuclear Hartmann-Hahn and nuclear Overhauser effect spectra. Using sequential information, specific assignments have been made for resonances arising from all 49 amino acid residues. Resonances arising from a number of residues in a minor conformer present in solution are also assigned. These results greatly extend previous resonance assignments made from spectra acquired at 300 MHz [Gooley, P. R. and Norton, R. S. (1985) Eur. J. Biochem. 153, 529-539] and provide the basis for a more accurate definition of the conformation of anthopleurin-A in aqueous solution. The secondary structure includes a four-stranded antiparallel beta-sheet encompassing residues 2-4, 21-23, 34-36 and 45-49, and possibly a beta-bulge located at Ser-19 and Gly-20. A type II beta-turn is formed by residues 30-33. These structural elements also occur within other related sea anemone polypeptides, but the conformation of the small loop region containing Pro-41 appears to be unique to anthopleurin-A.

Neurotoxins active on insects: amino acid sequences, chemical modifications, and secondary structure estimation by circular dichroism of toxins from the scorpion Androctonus australis Hector

Two scorpion neurotoxins active only on insects, the insect toxins AaH IT1 and AaH IT2, were purified from the venom of scorpions Androctonus australis Hector collected in Tozeur (Tunisia) and characterized. AaH IT2 was sequenced and found to differ in four amino acid positions from AaH IT, the single previously sequenced insect toxin [Darbon, H., Zlotkin, E., Kopeyan, C., Van Rietschoten, J., & Rochat, H. (1982) Int. J. Pept. Protein Res. 20, 320-330] which possessed an equal potential for paralyzing fly larvae. The basic amino acid residues of AaH IT1, which differs from AaH IT by one amino acid residue, were selectively chemically modified. Six derivatives were characterized. Their toxicity toward fly larvae and cockroach was determined, and their affinity for the AaH IT1 synaptosomal receptor from cockroach nerve cord was measured. Modification of His-30, Lys-34, and Arg-60 showed no significant effect on biological activity. However, the modification of Lys-28 or Lys-51 demonstrated that these two amino acids are important for toxicity. Furthermore, simultaneous modifications of both Lys-28 and Lys-51 led to a cumulative decrease in biological activity. AaH IT1 and AaH IT2 show similar CD spectra. The secondary structures content of AaH IT2 was estimated from circular dichroism data. Results showed that this class of toxin should possess an additional alpha-helical region and a beta-sheet strand, not found in toxins active on mammals. Attempts to localize these secondary structural features in the amino acid sequence of AaH IT2 indicated that these two regions would be located within the last 20 C-terminal amino acid residues. From these studies on secondary structures, it is possible to consider that toxins active on insects are more structurally constrained than those active on mammals; a decreased molecular flexibility may be, at least partially, responsible for the observed specificity of these toxins for the insect sodium channel. Furthermore, the two alpha-helices found in insect toxins enclosed the two conserved Lys-28 and Lys-51 and might thus be implicated in the toxic site of insect toxins.

GEOM: a new tool for molecular modelling based on distance geometry calculations with NMR data

GEOM is a new graphics tool which allows the use of distance geometry to compute linear and cyclic structures typically arising in drug design situations. Modified amino acids or monomeric organic entities can be easily constructed in an interactive way and deposited in the library of the distance geometry program together with geometric information required for structure calculation in dihedral angle space. In addition, GEOM is able to produce all files needed to calculate a structure based on NMR data (NOE and J-coupling constraints) and it permits the graphic analysis and comparison of computed structures. The application of GEOM is demonstrated in three examples: modelling of cyclosporin A structures with and without a limited set of H-bond constraints and modelling of a cyclic hexapeptide with a full NMR data set.

Sequence-specific 1H NMR assignments and secondary structure in the sea anemone polypeptide Stichodactyla helianthus neurotoxin I

Sequence-specific assignments are reported for the 500-MHz 1H nuclear magnetic resonance (NMR) spectrum of the 48-residue polypeptide neurotoxin I from the sea anemone Stichodactyla helianthus (Sh I). Spin systems were first identified by using two-dimensional relayed or multiple quantum filtered correlation spectroscopy, double quantum spectroscopy, and spin lock experiments. Specific resonance assignments were then obtained from nuclear Overhauser enhancement (NOE) connectivities between protons from residues adjacent in the amino acid sequence. Of a total of 265 potentially observable resonances, 248 (i.e., 94%) were assigned, arising from 39 completely and 9 partially assigned amino acid spin systems. The secondary structure of Sh I was defined on the basis of the pattern of sequential NOE connectivities, NOEs between protons on separate strands of the polypeptide backbone, and backbone amide exchange rates. Sh I contains a four-stranded antiparallel beta-sheet encompassing residues 1-5, 16-24, 30-33, and 40-46, with a beta-bulge at residues 17 and 18 and a reverse turn, probably a type II beta-turn, involving residues 27-30. No evidence of alpha-helical structure was found.

Protein structure determination in solution by nuclear magnetic resonance spectroscopy

Knowledge of three-dimensional protein structures is one of the foundations of protein design and protein engineering. Nuclear magnetic resonance spectroscopy was recently introduced as a second method for protein structure determination, in addition to the well-established diffraction techniques with protein single crystals. This new approach enables one to carry out detailed structural studies of proteins in solution and other noncrystalline states, which may be similar or identical to the physiological environment, and promises new insights into the dynamics of protein molecules and the protein-folding problem.

Determination of three-dimensional structures of proteins and nucleic acids in solution by nuclear magnetic resonance spectroscopy

Nuclear magnetic resonance (NMR) spectroscopy has evolved over the last decade into a powerful method for determining three-dimensional structures of biological macromolecules in solution. Key advances have been the introduction of two-dimensional experiments, high-field superconducting magnets, and computational procedures for converting the NMR-derived interproton distances and torsion angles into three-dimensional structures. This article outlines the methodology employed, describes the major NMR experiments necessary for the spectral analysis of macromolecules, and discusses the computational approaches employed to date. The present state of the art is illustrated using a variety of examples, and future developments are indicated.

Solution spatial structure of 'long' neurotoxin M9 from the scorpion Buthus eupeus by 1H-NMR spectroscopy

1H-NMR spectra of Buthus eupeus neurotoxin M9 (66 amino acid residues, four disulfide bonds) reveal two slowly exchangeable conformations at acidic pH. The spatial structure of the conformer prevailing under physiologically relevant conditions has been determined from two-dimensional 1H-NMR data treated by means of a distance geometry algorithm and refined by molecular modelling. Interrelation between the structure and function of mammalian neurotoxin M9 is discussed by comparing its conformation with those of the scorpion insectotoxins which exhibit different biological specificity (insectotoxins v-2, v-3 and I5A).

Three-dimensional structure of rabbit liver [Cd7]metallothionein-2a in aqueous solution determined by nuclear magnetic resonance

In previous work the metal-polypeptide co-ordinative bonds in the major protein species of a reconstituted [113Cd7]metallothionein-2 preparation from rabbit liver in aqueous solution were determined, the secondary polypeptide structure was found to contain several half-turns and 3(10)-helical segments, and a preliminary characterization of the overall polypeptide backbone fold in the beta-domain containing the three-metal cluster, and the alpha-domain containing the four-metal cluster, was obtained. Using a new, more extensive set of nuclear magnetic resonance data these earlier structures were improved by new structure calculations. The new experimental data consist of distance constraints from measurements of nuclear Overhauser effects, and dihedral angle constraints derived from both coupling constants and nuclear Overhauser effects. The structure calculations were performed with the program DISMAN. Since no information on the orientation of the two domains relative to each other could be obtained, the structure calculations were performed separately for the alpha-domain and the beta-domain. The average of the pairwise root-mean-square distances among the 20 structures with the least residual violations of input constraints was 2.9 A for the beta-domain and 1.4 A for the alpha-domain (1 A = 0.1 nm). The overall chirality of the polypeptide fold is right-handed for the beta-domain and left-handed for the alpha-domain. For each of the seven metal ions the local chirality of the co-ordination of the four cysteinyl Sy atoms is clearly defined. The improved structures of both domains show the previously noted differences relative to the recently published crystal structure of metallothionein-2a from rat liver.

A simple qualitative representation of polypeptide chain folds: comparison of protein tertiary structures

A new simple quantitative representation of three-dimensional structure of globular proteins is proposed which is useful for comparison of distantly related problems, computer sorting of large sets of conformations, and search of structurally similar domains in protein data base. The folding course of the polypeptide backbone is approximated by a set of successive vectors corresponding to the elements of regular secondary structure (e.g. alpha-helices, strands of beta-sheets) and non-regular segments. The parameters specifying the spatial organization of segments in this vector model are internal coordinates, namely, lengths of the vectors, planar and dihedral angles. Quantitative representation proposed allows to circumvent the problem of insertions/deletions and to avoid the stage of best superposition during protein comparison. An application was made to the comparison of three-dimensional structures of scorpion toxins Centruroides sculpturatus Ewing v-3, Buthus eupeus M9 and I5A, which have different chain lengths and low sequence similarity.