1
|
Kirmic Cosgun SN, Ceylan Tuncaboylu D, Alemdar M. G-POSS connected double network starch gels for protein release. Int J Biol Macromol 2024; 257:128705. [PMID: 38081486 DOI: 10.1016/j.ijbiomac.2023.128705] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2023] [Revised: 11/27/2023] [Accepted: 12/07/2023] [Indexed: 01/27/2024]
Abstract
Starch is one of the most frequently preferred natural polymers in hydrogel synthesis. Herein, we combined two strategies of associating brittle and ductile networks in a structure and incorporating inorganic particles into the polymeric gel to design mechanically enhanced nanocomposite double network (DN) starch gels. For the first time in the literature, nanocomposite starch gels (s-NC) were designed by cross-linking starch chains with 8-armed glycidyl-polyhedral oligomeric silsesquioxane (g-POSS) units. Fourier Transform Infrared Spectroscopy and Energy Dispersive X-Ray Spectroscopy analyses have proven that g-POSS is included in the gel structure and is homogeneously distributed throughout the network. More stable d-NC-DMA and d-NC-VP gels were obtained by incorporating N,N-dimethylacrylamide (DMA), or 1-vinyl-2-pyrrolidinone (VP) units, respectively, into g-POSS-linked starch gels, and the reaction kinetics were followed in situ. In SEM images, it was observed that d-NC-DMA had smaller pores and thicker pore walls compared to s-NC and d-NC-VP starch gels, and its mechanical strength was shown to be much superior by rheological tests, compression, and tensile analyses. In addition to increasing the mechanical strength of the gels, the potential of starch in protein release applications using amylase sensitivity has been demonstrated in vitro experiments using the model protein BSA.
Collapse
Affiliation(s)
- Seyma Nur Kirmic Cosgun
- Bezmialem Vakıf University Health Sciences Institute, Department of Biotechnology, 34093 Istanbul, Turkey; Bezmialem Vakif University, Faculty of Pharmacy, 34093 Istanbul, Turkey
| | - Deniz Ceylan Tuncaboylu
- Bezmialem Vakıf University Health Sciences Institute, Department of Biotechnology, 34093 Istanbul, Turkey; Bezmialem Vakif University, Faculty of Pharmacy, 34093 Istanbul, Turkey.
| | - Mahinur Alemdar
- Bezmialem Vakıf University Health Sciences Institute, Department of Biotechnology, 34093 Istanbul, Turkey; Bezmialem Vakif University, Faculty of Pharmacy, 34093 Istanbul, Turkey
| |
Collapse
|
2
|
Mas Garcia S, Roger JM, Ferbus R, Lourdin D, Rondeau-Mouro C. Monitoring of water sorption and swelling of potato starch-glycerol extruded blend by magnetic resonance imaging and multivariate curve resolution. Talanta 2023; 259:124464. [PMID: 36996661 DOI: 10.1016/j.talanta.2023.124464] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/07/2023] [Revised: 02/16/2023] [Accepted: 03/15/2023] [Indexed: 03/29/2023]
Abstract
Magnetic resonance microimaging (MRμI) is an outstanding technique for studying water transfers in millimetric bio-based materials in a non-destructive and non-invasive manner. However, depending on the composition of the material, monitoring and quantification of these transfers can be very complex, and hence reliable image processing and analysis tools are necessary. In this study, a combination of MRμI and multivariate curve resolution-alternating least squares (MCR-ALS) is proposed to monitor the water ingress into a potato starch extruded blend containing 20% glycerol that was shown to have interesting properties for biomedical, textile, and food applications. In this work, the main purpose of MCR is to provide spectral signatures and distribution maps of the components involved in the water uptake process that occurs over time with various kinetics. This approach allowed the description of the system evolution at a global (image) and a local (pixel) level, hence, permitted the resolution of two waterfronts, at two different times into the blend that could not be resolved by any other mathematical processing method usually used in magnetic resonance imaging (MRI). The results were supplemented by scanning electron microscopy (SEM) observations in order to interpret these two waterfronts in a biological and physico-chemical point of view.
Collapse
|
3
|
A new polysaccharide platform constructs self-adjuvant nanovaccines to enhance immune responses. J Nanobiotechnology 2022; 20:320. [PMID: 35836236 PMCID: PMC9281129 DOI: 10.1186/s12951-022-01533-3] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2022] [Accepted: 06/14/2022] [Indexed: 11/29/2022] Open
Abstract
Background Nanovaccines have shown the promising potential in controlling and eradicating the threat of infectious diseases worldwide. There has been a great need in developing a versatile strategy to conveniently construct diverse types of nanovaccines and induce potent immune responses. To that end, it is critical for obtaining a potent self-adjuvant platform to assemble with different types of antigens into nanovaccines. Results In this study, we identified a new natural polysaccharide from the rhizomes of Bletilla striata (PRBS), and used this polysaccharide as a platform to construct diverse types of nanovaccines with potent self-adjuvant property. In the construction process of SARS-CoV-2 nanovaccine, PRBS molecules and RBD protein antigens were assembled into ~ 300 nm nanoparticles by hydrogen bond. For HIV nanovaccine, hydrophobic effect dominantly drove the co-assembly between PRBS molecules and Env expression plasmid into ~ 350 nm nanospheres. Importantly, PRBS can potently activate the behaviors and functions of multiple immune cells such as macrophages, B cells and dendritic cells. Depending on PRBS-mediated immune activation, these self-adjuvant nanovaccines can elicit significantly stronger antigen-specific antibody and cellular responses in vivo, in comparison with their corresponding traditional vaccine forms. Moreover, we also revealed the construction models of PRBS-based nanovaccines by analyzing multiple assembly parameters such as bond energy, bond length and interaction sites. Conclusions PRBS, a newly-identified natural polysaccharide which can co-assemble with different types of antigens and activate multiple critical immune cells, has presented a great potential as a versatile platform to develop potent self-adjuvant nanovaccines. Supplementary Information The online version contains supplementary material available at 10.1186/s12951-022-01533-3.
Collapse
|
4
|
Thomas D, Mathew N, Nath MS. Starch modified alginate nanoparticles for drug delivery application. Int J Biol Macromol 2021; 173:277-284. [PMID: 33453259 DOI: 10.1016/j.ijbiomac.2020.12.227] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/30/2020] [Revised: 12/20/2020] [Accepted: 12/21/2020] [Indexed: 10/22/2022]
Abstract
Natural polymers have been widely studied as vehicles that have gained much interest in the encapsulation and delivery of drugs and bioactive molecules. In this study, we developed starch-modified alginate nanoparticles using a green facile technique for drug delivery application. The potential of the prepared nanoparticles for controlled drug delivery applications is demonstrated using theophylline and bovine serum albumin as model drugs. The nanoparticles possessed the encapsulation efficiency of 60 to 75%. The results of in vitro drug release studies showed the pH dependent characteristics of the prepared nanoparticles. In vitro cytotoxicity test revealed the biocompatibility of the developed nanoparticles against L929 fibroblast cell lines. The in vitro cellular uptake of nanoparticles was visualized in L929 fibroblast cells using fluorescent microscopy. The preliminary investigation suggests the developed nanoparticle is a promising candidate for drug delivery application.
Collapse
Affiliation(s)
- Deepa Thomas
- Research and Post Graduate Department of Chemistry, Bishop Moore College, Maveleikara, Kerala, India.
| | - Neethu Mathew
- Research and Post Graduate Department of Chemistry, Bishop Moore College, Maveleikara, Kerala, India
| | - Megha S Nath
- Research and Post Graduate Department of Chemistry, Bishop Moore College, Maveleikara, Kerala, India
| |
Collapse
|
5
|
Besford QA, Cavalieri F, Caruso F. Glycogen as a Building Block for Advanced Biological Materials. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1904625. [PMID: 31617264 DOI: 10.1002/adma.201904625] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2019] [Revised: 08/15/2019] [Indexed: 06/10/2023]
Abstract
Biological nanoparticles found in living systems possess distinct molecular architectures and diverse functions. Glycogen is a unique biological polysaccharide nanoparticle fabricated by nature through a bottom-up approach. The biocatalytic synthesis of glycogen has evolved over time to form a nanometer-sized dendrimer-like structure (20-150 nm) with a highly branched surface and a dense core. This makes glycogen markedly different from other natural linear or branched polysaccharides and particularly attractive as a platform for biomedical applications. Glycogen is inherently biodegradable, nontoxic, and can be functionalized with diverse surface and internal motifs for enhanced biofunctional properties. Recently, there has been growing interest in glycogen as a natural alternative to synthetic polymers and nanoparticles in a range of applications. Herein, the recent literature on glycogen in the material-based sciences, including its use as a constituent in biodegradable hydrogels and fibers, drug delivery vectors, tumor targeting and penetrating nanoparticles, immunomodulators, vaccine adjuvants, and contrast agents, is reviewed. The various methods of chemical functionalization and physical assembly of glycogen nanoparticles into multicomponent nanodevices, which advance glycogen toward a functional therapeutic nanoparticle from nature and back again, are discussed in detail.
Collapse
Affiliation(s)
- Quinn A Besford
- ARC Centre of Excellence in Convergent Bio-Nano Science and Technology, and the Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria, 3010, Australia
| | - Francesca Cavalieri
- ARC Centre of Excellence in Convergent Bio-Nano Science and Technology, and the Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria, 3010, Australia
- Dipartimento di Scienze e Tecnologie Chimiche, Università degli Studi di Roma Tor Vergata, via della Ricerca Scientifica 1, 00133, Rome, Italy
| | - Frank Caruso
- ARC Centre of Excellence in Convergent Bio-Nano Science and Technology, and the Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria, 3010, Australia
| |
Collapse
|
6
|
Jujjavarapu SE, Dhagat S. Evolutionary Trends in Industrial Production of α-amylase. Recent Pat Biotechnol 2019; 13:4-18. [PMID: 30810102 DOI: 10.2174/2211550107666180816093436] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2018] [Revised: 07/09/2018] [Accepted: 07/27/2018] [Indexed: 06/09/2023]
Abstract
BACKGROUND Amylase catalyzes the breakdown of long-chain carbohydrates to yield maltotriose, maltose, glucose and dextrin as end products. It is present in mammalian saliva and helps in digestion. OBJECTIVE Their applications in biotechnology include starch processing, biofuel, food, paper, textile and detergent industries, bioremediation of environmental pollutants and in clinical and medical applications. The commercial microbial strains for production of α-amylase are Bacillus subtilis, B. licheniformis, B. amyloliquefaciens and Aspergillus oryzae. Industrial production of enzymes requires high productivity and cannot use wild-type strains for enzyme production. The yield of enzyme from bacteria can be increased by varying the physiological and genetic properties of strains. RESULTS The genetic properties of a bacterium can be improved by enhancing the expression levels of the gene and secretion of the enzyme outside the cells, thereby improving the productivity by preventing degradation of enzymes. Overall, the strain for specific productivity should have the maximum ability for synthesis and secretion of an enzyme of interest. Genetic manipulation of α-amylase can also be used for the production of enzymes with different properties, for example, by recombinant DNA technology. CONCLUSION This review summarizes different techniques in the production of recombinant α- amylases along with the patents in this arena. The washing out of enzymes in reactions became a limitation in utilization of these enzymes in industries and hence immobilization of these enzymes becomes important. This paper also discusses the immobilization techniques for used α-amylases.
Collapse
Affiliation(s)
| | - Swasti Dhagat
- Department of Biotechnology, National Institute of Technology Raipur, Raipur-492010, India
| |
Collapse
|
7
|
Mohapatra S, Asfer M, Anwar M, Ahmed S, Ahmad FJ, Siddiqui AA. Carboxymethyl Assam Bora rice starch coated SPIONs: Synthesis, characterization and in vitro localization in a micro capillary for simulating a targeted drug delivery system. Int J Biol Macromol 2018; 115:920-932. [DOI: 10.1016/j.ijbiomac.2018.04.152] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2018] [Revised: 04/14/2018] [Accepted: 04/28/2018] [Indexed: 10/17/2022]
|
8
|
Mohapatra S, Siddiqui AA, Anwar M, Bhardwaj N, Akhter S, Ahmad FJ. Synthesis and characterization of novel carboxymethyl Assam Bora rice starch for the controlled release of cationic anticancer drug based on electrostatic interactions. AAPS PharmSciTech 2018. [PMID: 28631252 DOI: 10.1208/s12249-017-0824-z] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022] Open
Abstract
Carboxymethyl Assam Bora rice starch (CM-ABRS) was chemically synthesized in non-aqueous medium with the optimum degree of substitution (DS) of 1.23, and physicochemically characterized by FT-IR, DSC, XRD, and SEM analysis. Comparative evaluation of CM-ABRS with native starch (ABRS) for powder flow characteristics, swelling index, apparent solubility, rheological properties, textural properties, and mucoadhesive studies were carried out. The aim of the current work was to investigate the potential of CM-ABRS as a novel carrier for the water-soluble chemotherapeutic, doxorubicin hydrochloride (DOX). Formation of drug/polymer complex (DOX-CM-ABRS) via electrostatic interaction has been evaluated for the controlled release of DOX in three different pH media (phosphate-buffered saline (PBS), pH 7.4, 6.8, and 5.5). In vitro drug release studies illustrated faster release of drug in PBS at pH 5.5 as compared to pH 6.8 and pH 7.4, respectively, indicating the importance of pH-sensitive drug release from the DOX-CM-ABRS complex in malignant tissues.
Collapse
|
9
|
Okeyoshi K, Joshi G, Rawat S, Sornkamnerd S, Amornwachirabodee K, Okajima MK, Ito M, Kobayashi S, Higashimine K, Oshima Y, Kaneko T. Drying-Induced Self-Similar Assembly of Megamolecular Polysaccharides through Nano and Submicron Layering. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2017; 33:4954-4959. [PMID: 28190355 DOI: 10.1021/acs.langmuir.7b00107] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
We propose a self-similar assembly to generate planar orientation of megamolecular polysaccharides on the nanometer scale and submicron scale. Evaporating the aqueous liquid crystalline (LC) solution on a planar air-LC interface induces polymer layering by self-assembly and rational action of macroscopic capillary forces between the layers. To clarify the mechanisms of nanometer- and submicron-scale layering, the polymer films are investigated by electron microscopy.
Collapse
Affiliation(s)
- Kosuke Okeyoshi
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| | - Gargi Joshi
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| | - Sakshi Rawat
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| | - Saranyoo Sornkamnerd
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| | | | - Maiko K Okajima
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| | - Mayumi Ito
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| | - Shoko Kobayashi
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| | - Koichi Higashimine
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| | - Yoshifumi Oshima
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| | - Tatsuo Kaneko
- Japan Advanced Institute of Science and Technology , 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan
| |
Collapse
|
10
|
Jaishankar A, Wee M, Matia-Merino L, Goh KK, McKinley GH. Probing hydrogen bond interactions in a shear thickening polysaccharide using nonlinear shear and extensional rheology. Carbohydr Polym 2015; 123:136-45. [DOI: 10.1016/j.carbpol.2015.01.006] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2014] [Revised: 12/24/2014] [Accepted: 01/05/2015] [Indexed: 10/24/2022]
|
11
|
Quaternized starch-based carrier for siRNA delivery: From cellular uptake to gene silencing. J Control Release 2014; 185:109-20. [DOI: 10.1016/j.jconrel.2014.04.031] [Citation(s) in RCA: 38] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2014] [Revised: 04/16/2014] [Accepted: 04/19/2014] [Indexed: 01/12/2023]
|
12
|
High-amylose sodium carboxymethyl starch matrices: development and characterization of tramadol hydrochloride sustained-release tablets for oral administration. ISRN PHARMACEUTICS 2014; 2014:391523. [PMID: 25006518 PMCID: PMC4004023 DOI: 10.1155/2014/391523] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/22/2014] [Accepted: 03/02/2014] [Indexed: 11/26/2022]
Abstract
Substituted amylose (SA) polymers were produced from high-amylose corn starch by etherification of its hydroxyl groups with chloroacetate. Amorphous high-amylose sodium carboxymethyl starch (HASCA), the resulting SA polymer, was spray-dried to obtain an excipient (SD HASCA) with optimal binding and sustained-release (SR) properties. Tablets containing different percentages of SD HASCA and tramadol hydrochloride were produced by direct compression and evaluated for dissolution. Once-daily and twice-daily SD HASCA tablets containing two common dosages of tramadol hydrochloride (100 mg and 200 mg), a freely water-soluble drug, were successfully developed. These SR formulations presented high crushing forces, which facilitate further tablet processing and handling. When exposed to both a pH gradient simulating the pH variations through the gastrointestinal tract and a 40% ethanol medium, a very rigid gel formed progressively at the surface of the tablets providing controlled drug-release properties. These properties indicated that SD HASCA was a promising and robust excipient for oral, sustained drug-release, which may possibly minimize the likelihood of dose dumping and consequent adverse effects, even in the case of coadministration with alcohol.
Collapse
|
13
|
Sieradzki R, Traitel T, Goldbart R, Geresh S, Kost J. Tailoring quaternized starch as a non-viral carrier for gene delivery applications. POLYM ADVAN TECHNOL 2014. [DOI: 10.1002/pat.3277] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Affiliation(s)
- Rivka Sieradzki
- Department of Biotechnology; Ben-Gurion University of the Negev; Beer-Sheva 84105 Israel
| | - Tamar Traitel
- Department of Chemical Engineering; Ben-Gurion University of the Negev; Beer-Sheva 84105 Israel
| | - Riki Goldbart
- Department of Chemical Engineering; Ben-Gurion University of the Negev; Beer-Sheva 84105 Israel
| | - Shimona Geresh
- Department of Biotechnology; Ben-Gurion University of the Negev; Beer-Sheva 84105 Israel
| | - Joseph Kost
- Department of Chemical Engineering; Ben-Gurion University of the Negev; Beer-Sheva 84105 Israel
| |
Collapse
|
14
|
|
15
|
Lemieux M, Gosselin P, Mateescu MA. Carboxymethyl high amylose starch as excipient for controlled drug release: Mechanistic study and the influence of degree of substitution. Int J Pharm 2009; 382:172-82. [DOI: 10.1016/j.ijpharm.2009.08.030] [Citation(s) in RCA: 41] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2009] [Revised: 08/14/2009] [Accepted: 08/24/2009] [Indexed: 11/28/2022]
|
16
|
Bagri LP, Bajpai J, Bajpai AK. Cryogenic Designing of Biocompatible Blends of Polyvinyl alcohol and Starch with Macroporous Architecture. JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY 2009. [DOI: 10.1080/10601320903252025] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
17
|
Bajpai AK, Shrivastava J. Studies on alpha-amylase induced degradation of binary polymeric blends of crosslinked starch and pectin. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2007; 18:765-77. [PMID: 17143735 DOI: 10.1007/s10856-006-0003-3] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2005] [Accepted: 12/08/2005] [Indexed: 05/12/2023]
Abstract
A blend matrix of crosslinked starch and pectin was prepared and characterized by infra-red (IR) spectroscopy, differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The prepared blends were investigated kinetically for water sorption studies and alpha-amylase induced degradation adopting a gravimetric procedure. Based on the experimental findings, a plausible mechanism including both diffusion and surface enhanced degradation was suggested and degradation profiles were interpreted. The influence of various factors such as chemical architecture of the blend, pH and temperature of alpha-amylase solution were examined for the swelling and degradation kinetics of crosslinked starch-pectin blends. The effect of concentration of enzyme solution was also studied on the degradation profile of the blends. A correlation was established between the extent of degradation and water imbibing capacity of the degrading blends.
Collapse
Affiliation(s)
- A K Bajpai
- Bose Memorial Research Laboratory, Department of Chemistry, Government Autonomous Science College, Jabalpur, MP, India.
| | | |
Collapse
|
18
|
Atyabi F, Manoochehri S, Moghadam SH, Dinarvand R. Cross-linked starch microspheres: Effect of cross-linking condition on the microsphere characteristics. Arch Pharm Res 2006; 29:1179-86. [PMID: 17225470 DOI: 10.1007/bf02969311] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
Abstract
Cross-linked starch microspheres were prepared using different kinds of cross-linking agents. The influence of several parameters on morphology, size, swelling ratio and drug release rate from these microspheres were evaluated. These parameters included cross-linker type, concentration and the duration of cross-linking reaction. Microspheres cross-linked with glutaraldehyde had smooth surface compared with those prepared with epichlorhydrine or formaldehyde. The particle size increased with increasing the cross-linking time and increasing the drug loading. Swelling ratio of the particles was a function of cross-linker type but not the concentration or time of cross-linking. Drug release from starch microspheres was measured in phosphate buffer and also in phosphate buffer containing alpha-amylase. Results showed that microspheres cross-linked with epichlorhydrine released all their drug content in the first 30 minutes. However, cross-linking of the starch microspheres with glutaraldehyde or formaldehyde decreased drug release rate. SEM and drug release studies showed that cross-linked starch microspheres were susceptible to the enzymatic degradation under the influence of alpha-amylase. Changing the enzyme concentration from 5000 to 10,000 IU/L, increased drug release rate but higher concentration of enzyme (20,000 IU/L) caused no more acceleration.
Collapse
Affiliation(s)
- Fatemeh Atyabi
- Faculty of Pharmacy, Tehran University of Medical Sciences, Tehran, PO Box 14155-6451, Iran.
| | | | | | | |
Collapse
|
19
|
Coluccio ML, Ciardelli G, Bertoni F, Silvestri D, Cristallini C, Giusti P, Barbani N. Enzymatic Erosion of Bioartificial Membranes to Control Drug Delivery. Macromol Biosci 2006; 6:403-11. [PMID: 16775815 DOI: 10.1002/mabi.200600022] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
The preparation of an enzymatic controlled drug release system from blends of PVA/starch/alphaA, in the form of films, is described. It was shown that alphaA hydrolyses the starch within these films, resulting in a time-dependent change of the porosity in the matrix. Films were characterized by calorimetric analysis to study the interactions between the enzyme and the polymeric constituents at the molecular level. The presence of alphaA, in fact, influenced the PVA crystallization in the blends. Release tests and permeability experiments were carried out to evaluate the transport properties of the films. An increase in porosity and permeability was observed by increasing alphaA content (16-28 wt.-%). Films loaded with theophylline and caffeine were also prepared to analyze drug release properties of the matrix. Drug release kinetics were coherent with the measured changes in porosity: at higher alphaA concentrations the amount of released drug increased under the influence of diffusion and erosion processes. The results obtained are promising for the realization of drug delivery devices for a rapid release or for the release of poorly soluble drugs which usually remain entrapped in the matrix.SEM images of a PVA/starch/alphaA film before (A) and after (B) the erosion.
Collapse
Affiliation(s)
- Maria Laura Coluccio
- Department of Chemical Engineering, Industrial Chemistry and Science of Materials, University of Pisa, Via Diotisalvi 2, 56126 Pisa, Italy
| | | | | | | | | | | | | |
Collapse
|
20
|
Calinescu C, Mulhbacher J, Nadeau E, Fairbrother JM, Mateescu MA. Carboxymethyl high amylose starch (CM-HAS) as excipient for Escherichia coli oral formulations. Eur J Pharm Biopharm 2005; 60:53-60. [PMID: 15848056 DOI: 10.1016/j.ejpb.2004.12.006] [Citation(s) in RCA: 56] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/21/2004] [Revised: 09/09/2004] [Accepted: 12/01/2004] [Indexed: 11/29/2022]
Abstract
Carboxymethyl high amylose starch (CM-HAS) is proposed as a novel excipient for oral tablet formulation of bioactive agents ensuring their protection in the stomach and delivery in the intestine. Three variants of CM-HAS, with different degrees of substitution, were synthesized by starch treatment with various amounts of monochloroacetic acid. The products were dried in powder form and tablets were obtained by direct compression of mixed powders of polymeric excipient and lyophilized Escherichia coli (E. coli) bacteria. Dosage forms of CM-HAS are unswollen and compact in acidic medium, ensuring protection of active agents against acidity. Release of bacteria from CM-HAS tablets is based on the fast swelling of the tablets during the passage from gastric acidity to alkaline intestinal medium, enzymatic hydrolysis triggering their rapid, almost total dissolution. The bacteria thus formulated displayed higher survival rates in acidic gastric conditions and for longer periods than the free bacteria or than the bacteria formulated with the non-derivatized starch. The CM-HAS selected matrix also assured a good viability of bacteria after 6 months under refrigeration.
Collapse
Affiliation(s)
- Carmen Calinescu
- Department of Chemistry and Biochemistry, Université du Québec à Montréal, Montréal, Qué., Canada
| | | | | | | | | |
Collapse
|
21
|
Thérien-Aubin H, Baille WE, Zhu XX, Marchessault RH. Imaging of High-Amylose Starch Tablets. 3. Initial Diffusion and Temperature Effects. Biomacromolecules 2005; 6:3367-72. [PMID: 16283767 DOI: 10.1021/bm0503930] [Citation(s) in RCA: 33] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The penetration of water into cross-linked high amylose starch tablets was studied at different temperatures by nuclear magnetic resonance (NMR) imaging, which follows the changes occurring at the surface and inside the starch tablets during swelling. It was found that the swelling was anisotropic, whereas water diffusion was almost isotropic. The water proton image profiles at the initial stage of water penetration were used to calculate the initial diffusion coefficient. The swelling and water concentration gradients in this controlled release system show significant temperature dependence. Diffusion behavior changed from Fickian to Case II diffusion with increasing temperature. The observed phenomena are attributed to the gelatinization of starch and the pseudo-cross-linking effect of double helix formation.
Collapse
Affiliation(s)
- Héloïse Thérien-Aubin
- Département de chimie, Université de Montréal, C.P. 6128, Succ. Centre-ville, Montréal, Québec, H3C 3J7 Canada
| | | | | | | |
Collapse
|
22
|
Coluccio ML, Barbani N, Bianchini A, Silvestri D, Mauri R. Transport Properties of EVAl-Starch-α Amylase Membranes. Biomacromolecules 2005; 6:1389-96. [PMID: 15877357 DOI: 10.1021/bm049321j] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
We investigated the influence of various physicochemical parameters on the morphology and time-porosity formation of membranes composed of ethylene-vinyl alcohol, starch, and alpha-amylase. In particular, we determined that (1) it is possible to obtain a membrane with desired porosity by phase inversion in an appropriate water-ethanol mixture and (2) the enzymatic bioerosion is controlled by the amount of alpha-amylase present in the blend. Although no experiments involving drugs were carried out, the delivery properties of the film were determined by measuring the Darcy permeability, the effective diffusivity, and the mean reaction rate of the membranes, relating them to the modality of membrane preparation, the amount of enzyme present within the membrane, and the incubation time of the samples in a buffer solution. Simple theoretical models of the delivery properties of the membranes were developed, leading to predictions that were in good agreement with the experimental results.
Collapse
Affiliation(s)
- M L Coluccio
- Department of Chemical Engineering, DICCISM, University of Pisa, Via Diotisalvi 2, 56126 Pisa, Italy
| | | | | | | | | |
Collapse
|
23
|
Schöll I, Boltz-Nitulescu G, Jensen-Jarolim E. Review of novel particulate antigen delivery systems with special focus on treatment of type I allergy. J Control Release 2005; 104:1-27. [PMID: 15866331 DOI: 10.1016/j.jconrel.2004.12.020] [Citation(s) in RCA: 42] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/05/2004] [Accepted: 12/20/2004] [Indexed: 12/13/2022]
Abstract
For the treatment of infectious diseases, cancer and allergy, the directed induction of an appropriate immune response is the ultimate goal. Therefore, with the development of pure, often very small proteins, peptides or DNA by molecular biology techniques, the research for suitable adjuvants or delivery systems became increasingly important. Particle formulations are made of a variety of materials, including lipids, proteins or amino acids, polysaccharides, polyacrylic substances or organic acids. Microparticles serve as vehicles and provide a depot for the entrapped or coupled antigen. The release occurs in a pulsatile or continuous manner, a feature, which is well controllable for many particulate systems. Particles attract antigen presenting cells to the administration site, thereby guaranteeing the efficient presentation of the antigen to the immune system. Importantly, particles also protect the entrapped substance. This is especially necessary after oral application to avoid gastric or tryptic breakdown. In this article, the design and construction of different antigen delivery systems and their immune effects, with special focus on the suitability for allergy treatment, are discussed.
Collapse
Affiliation(s)
- Isabella Schöll
- Institute of Pathophysiology, Center of Physiology and Pathophysiology, Medical University of Vienna, AKH-EB03.Q, Waehringer Guertel 18-20, 1090 Vienna, Austria
| | | | | |
Collapse
|
24
|
Bajpai AK, Shrivastava J. α‐Amylase Induced Enhanced Enzymatic Degradation of Binary Polymeric Blends of Crosslinked Starch and Gelatin. JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY 2004. [DOI: 10.1081/ma-120039181] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
25
|
Singh BN, Trombetta LD, Kim KH. Biodegradation Behavior of Gellan Gum in Simulated Colonic Media. Pharm Dev Technol 2004; 9:399-407. [PMID: 15581076 DOI: 10.1081/pdt-200035793] [Citation(s) in RCA: 32] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
Abstract
The objective of this investigation was to test the biodegradability of gellan gum in the presence of galactomannanase in order to explore its suitability for the development of colon-specific controlled delivery systems. Gellan beads containing azathioprine (AZA) were prepared by ionotropic gelation in the presence of Ca2+ ions and were coated with an enteric polymer, Eudragit S-100. The effects of the simulated colonic fluid (SCF, pH 7.4 phosphate buffer) containing 15 mg/mL of galactomannanase on the in vitro release profiles of uncoated and enteric-coated beads were investigated, and the morphological changes in the structure of uncoated beads were assessed by scanning electron microscopy (SEM). In addition, 1% solution of deacetylated gellan gum was prepared and several aliquots of the resulting solution were evaluated rheologically to determine the concentration- and time-dependent effects of galactomannanase. Based on the percent drug released at 2 h, approximately 10% greater amount of drug was released in the SCF containing galactomannanase when compared with the enzyme-free dissolution medium. Results of rheological studies demonstrated that effects of galactomannanase on the viscosity of gellan gum solution are concentration-dependent rather than time-dependent. A significant decrease in the viscosity was noted in the presence of galactomannanase at a concentration of 15 mg/ mL, indicating that the polysaccharide degraded in an enzymatic reaction. SEM micrographs showed a distinct disruption of the polymeric network in the SCF. Overall, the results suggest that gellan gum undergoes significant degradation in the presence of galactomannanase which in turn facilitates the drug release from beads in the SCF in a controlled manner, thus approving the suitability of gellan gum as a carrier for controlled colonic delivery.
Collapse
Affiliation(s)
- Brahma N Singh
- Drug Delivery Systems Research Laboratory, College of Pharmacy and Allied Health Professions, St John's University, Jamaica, New York, USA.
| | | | | |
Collapse
|
26
|
Abstract
The aim of the present work was to compare the drug release rates from the native and acetylated starches. The average degree of acetyl substitution per glucose residue of potato starch was either 1.9 (SA DS 1.9) or 2.6 (SA DS 2.6). Bovine serum albumin (BSA) (mol. wt. 68,000), FITC-dextran (mol. wt. 4400), timolol (mol. wt. 332, log P=1.91) and sotalol-HCl (mol. wt. 308, log P=-0.62) were used as model drugs. All of the model drugs were released rapidly from the potato starch film in PBS pH 7.4 with and without alpha-amylase in the dissolution medium (t50% varied from 0.17 to 3.37 h). When compared to the potato starch film, all of the studied drugs were released at a substantially slower rate from the SA films in the corresponding mediums. The release of the smaller drugs (sotalol, timolol) from the SA films was faster than that of the macromolecules (FITC-dextran, BSA). Furthermore, sotalol was released faster than the more lipohilic timolol from the SA films. Release of macromolecules from the SA films was biphasic with and without alpha-amylase in the dissolution medium: an initial fast release phase was followed by a slower release phase (SA DS 1.9) or no release occurred after the initial phase (SA DS 2.6). All of the drugs were released faster from the SA DS 1.9 film than the weight loss of the film itself. When compared to the SA DS 1.9 film, the model drugs (except sotalol) were released slower from the SA DS 2.6 film. The macromolecule release from the SA DS 2.6 film was erosion-controlled. The weight loss of the SA DS 2.6 film was slow with and without alpha-amylase in the incubation medium. The present results show that acetylation of potato starch can substantially retard drug release. The drug release profiles may be controlled by the degree of substitution, since drug release from the SA DS 1.9 film was faster than the corresponding release from the SA DS 2.6 film.
Collapse
Affiliation(s)
- Laura Tuovinen
- Department of Pharmaceutics, University of Kuopio, P.O. Box 1627, FIN-70211 Kuopio, Finland.
| | | | | |
Collapse
|
27
|
Tuovinen LM, Peltonen SH, Suortti TM, Crowther NJ, Elomaa MA, Järvinen KP. Enzymatic degradation of and bovine serum albumin release from starch-acetate films. Biomacromolecules 2002; 3:284-90. [PMID: 11888313 DOI: 10.1021/bm015581e] [Citation(s) in RCA: 16] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
The effect of acetylation of potato starch on swelling, enzymatic degradation, and bovine serum albumin (BSA, molecular mass 68 kDa) release rate from polymer films was studied. Potato starch and potato starch acetates (SA), having a degree of substitution of 1.9 or 2.6, were investigated. Polymer films were incubated in phosphate buffer solution pH 7.4 in the absence and presence of enzymes (alpha-amylase, amyloglucosidase, esterase) or in human serum. The acetylation of potato starch decreased its swelling considerably. Increased acetylation of starch also considerably retarded its enzymatic degradation. Due to the decreased swelling and degradation of SA films, BSA was released much slower from SA films than from potato starch films, both in the presence and absence of enzymes.
Collapse
Affiliation(s)
- Laura M Tuovinen
- Department of Pharmaceutics, University of Kuopio, P.O. Box 1627, FIN-70211 Kuopio, Finland.
| | | | | | | | | | | |
Collapse
|
28
|
Tarvainen M, Sutinen R, Peltonen S, Tiihonen P, Paronen P. Starch acetate--a novel film-forming polymer for pharmaceutical coatings. J Pharm Sci 2002; 91:282-9. [PMID: 11782918 DOI: 10.1002/jps.10027] [Citation(s) in RCA: 37] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Starch acetates (SA) have been investigated as novel, multifunctional excipients for the direct compression tableting process. In this study, the film-forming ability of SA (DS 2.8) and the effect of commonly used plasticizers on the physical properties of SA films were evaluated. The results were compared with the properties of ethylcellulose (EC). Free films were prepared by a solvent-cast method. Mechanical studies, water vapor and drug permeability tests, and thermal analysis (DSC) were used to characterize the film-forming ability of SA and efficiency of tested plasticizers. SA films were tougher and stronger than EC films at the same plasticizer concentration. Also, in most cases, the water vapor permeability of SA films was lower than that of EC films. DSC thermograms supported the findings of the tensile test: plasticizers with several small ester groups (e.g., triacetin and triethyl citrate) were the most compatible with SA. Due to the good mechanical properties, low water vapor, and drug permeabilities of the films, SA seems to be a promising film-former for pharmaceutical coatings. The toughness of SA films may result from their dense film structure, which is due to strong interaction forces between adjacent SA molecular chains.
Collapse
Affiliation(s)
- Maarit Tarvainen
- Department of Pharmaceutics, University of Kuopio, PO Box 1627, FIN-70211 Kuopio, Finland.
| | | | | | | | | |
Collapse
|
29
|
Chebli C, Moussa I, Buczkowski S, Cartilier L. Substituted amylose as a matrix for sustained drug release. Pharm Res 1999; 16:1436-40. [PMID: 10496662 DOI: 10.1023/a:1018963428219] [Citation(s) in RCA: 16] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
PURPOSE Amylose derivatives form an important group of polymers, and many of them can be used as drug sustained-release systems. METHODS Substituted amylose can be prepared in a 1-step reaction with substituent(s) in a basic medium. The substituents can be represented as (A-R), where (A) serves an epoxy, halide or suitable organic or inorganic function reacting with hydroxyl groups located on the amylose chain, and (R) is an organic radical. RESULTS The present work shows the synthesis of different polymers and the effect of different (A) and/or (R) and their different degrees of substitution (n) on the sustained drug release from matrix tablets prepared by direct compression. CONCLUSIONS SA polymers are interesting excipients for the preparation of controlled drug release tablets.
Collapse
Affiliation(s)
- C Chebli
- Faculté de Pharmacie, Université de Montréal, Québec, Canada
| | | | | | | |
Collapse
|
30
|
Dumoulin Y, Cartilier LH, Mateescu MA. Cross-linked amylose tablets containing alpha-amylase: an enzymatically-controlled drug release system. J Control Release 1999; 60:161-7. [PMID: 10425322 DOI: 10.1016/s0168-3659(99)00065-6] [Citation(s) in RCA: 44] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
An oral controlled release system based on direct compression of cross-linked amylose (CLA) and drug powders was previously introduced. For drugs with limited solubility or for some drugs for which solubility can be influenced by variation of gastro-intestinal pH, a system is required to accelerate drug release. This paper describes a novel enzymatically-controlled drug release (ECDR) system based on the addition of alpha-amylase to CLA tablets, which can modulate the release kinetics of drugs. The alpha-amylase within the tablets is able to hydrolyze alpha-1-4-glucosidic bonds present in the CLA semisynthetic substrate. Increasing amounts of alpha-amylase (5 to 25 EU) within the tablets induced a significant decrease in release time from 24 to 6 h. High amounts of external alpha-amylase (300-6000 EU/l) had a slight effect on the release rate. Drug release from the ECDR system seems to be controlled by two sequential mechanisms: (a) hydration and swelling of CLA tablets followed by (b) internal enzymatic hydrolysis of the hydrated gel phase.
Collapse
Affiliation(s)
- Y Dumoulin
- Faculty of Pharmacy, University of Montreal, C.P. 6128, Succ. Centre-Ville, Montreal, Quebec, Canada
| | | | | |
Collapse
|
31
|
Moussa IS, Lenaerts V, Cartilier LH. Effect of some physical parameters on the swelling properties of cross-linked amylose matrices. Int J Pharm 1998. [DOI: 10.1016/s0378-5173(98)00160-4] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
32
|
Roskos KV, Maskiewicz R. Degradable controlled release systems useful for protein delivery. PHARMACEUTICAL BIOTECHNOLOGY 1997; 10:45-92. [PMID: 9160368 DOI: 10.1007/0-306-46803-4_2] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Affiliation(s)
- K V Roskos
- Matrix Pharmaceutical, Inc., Fremont, California 94555, USA
| | | |
Collapse
|
33
|
Filipović-Grćić J, Maysinger D, Zorc B, Jalgẽnjak I. Macromolecular prodrugs. IV. alginate-chitosan microspheres of PHEA-L-dopa adduct. Int J Pharm 1995. [DOI: 10.1016/0378-5173(94)00269-b] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/17/2022]
|
34
|
|
35
|
Lio K, Minoura N, Nagura M. Swelling characteristics of a blend hydrogel made of poly(allylbiguanido-co-allylamine) and poly(vinyl alcohol). POLYMER 1995. [DOI: 10.1016/0032-3861(95)91204-k] [Citation(s) in RCA: 20] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/17/2022]
|
36
|
Abstract
Targeted delivery to the gastrointestinal tract requires a multi-disciplinary approach to research involving contributions from polymer and material scientists, gastroenterologists, pharmaceutical scientists and technologists. Intestinal delivery is important not only for drugs that act locally, but also for those with systemic activity. In particular, there is considerable interest in the oral delivery of peptides and it is felt that the colon may provide an advantageous absorption site for such molecules. The different targeting mechanisms available to the pharmaceutical scientist to provide site-specific delivery in the gastrointestinal tract will be critically assessed. Delivery systems and targeting agents, which are being developed for the delivery of drugs, may also be exploited for the delivery of vaccines, since many of the delivery problems are common to both areas. Recent developments in the design of oral antigen formulations will be discussed in this review.
Collapse
Affiliation(s)
- I R Wilding
- Pharmaceutical Profiles Limited, Nottingham, U.K
| | | | | |
Collapse
|
37
|
Abstract
Ampicillin was embedded in a chitosan matrix to develop an oral release dosage form. The in vitro release profile of ampicillin from chitosan beads and microgranules of chitosan was monitored, as a function of time, using a UV Spectrophotometer. The releasing studies were performed in a rotating shaker at 100 r.p.m., containing 0.1 M HCI buffer, pH 2.0, or 0.1 M phosphate buffer, pH 7.4, solutions, and a comparison was made between the drug loaded microbeads and microgranules. It seems that the amount and percentage of drug release was much higher in HCI solution compared with the phosphate solution, probably due to the gelation properties of the matrix at acid pH. The release rate of ampicillin from the chitosan matrix was slower for the beads as compared with the granules. From scanning electron microscopic studies, it appears that the drug forms a crystal structure within the chitosan beads, which dissolves out slowly to the dissolution medium through the micropores of the chitosan matrix. The results propose the possibility of modifying the formulation in order to obtain the desired controlled release of the drug for a convenient oral sustained delivery system.
Collapse
Affiliation(s)
- T Chandy
- Biosurface Technology Division, Sree Chitra Tirunal Institute for Medical Sciences and Technology, Poojappura, Trivandrum, India
| | | |
Collapse
|
38
|
Chandy T, Sharma CP. Chitosan beads and granules for oral sustained delivery of nifedipine: in vitro studies. Biomaterials 1992; 13:949-52. [PMID: 1477265 DOI: 10.1016/0142-9612(92)90119-9] [Citation(s) in RCA: 84] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Abstract
Nifedipine was embedded in a chitosan matrix to develop a prolonged-release form. The in vitro release profiles of nifedipine from chitosan beads and microgranules were monitored by UV spectrophotometer. The studies were performed in a rotating shaker (100 rev min-1) in 0.1 M HCl buffer (pH 2.0) or 0.1 M phosphate buffer (pH 7.4). Comparison was made between drug-loaded microbeads and microgranules. The amount and percentage of drug release were much higher in HCl than in phosphate buffer, probably due to the salt formation of the matrix (chitosan hydrochloride) at acid pH. The release rate of nifedipine from chitosan matrix was slower for beads than granules. These findings suggest the possibility of modifying the formulations to obtain the desired controlled release of the drug in an oral sustained-delivery system.
Collapse
Affiliation(s)
- T Chandy
- Biosurface Technology Division, Sree Chitra Tirunal Institute for Medical Sciences and Technology, Poojapura, Trivandrum, India
| | | |
Collapse
|