Purification and characterization of inorganic pyrophosphatase from Methanobacterium thermoautotrophicum (strain delta H)

Thermophilic Inorganic Pyrophosphatase Ton1914 from Thermococcus onnurineus NA1 Removes the Inhibitory Effect of Pyrophosphate

Pyrophosphate (PP_i) is a byproduct of over 120 biosynthetic reactions, and an overabundance of PP_i can inhibit industrial synthesis. Pyrophosphatases (PPases) can effectively hydrolyze pyrophosphate to remove the inhibitory effect of pyrophosphate. In the present work, a thermophilic alkaline inorganic pyrophosphatase from Thermococcus onnurineus NA1 was studied. The optimum pH and temperature of Ton1914 were 9.0 and 80 °C, respectively, and the half-life was 52 h at 70 °C and 2.5 h at 90 °C. Ton1914 showed excellent thermal stability, and its relative enzyme activity, when incubated in Tris-HCl 9.0 containing 1.6 mM Mg²⁺ at 90 °C for 5 h, was still 100%, which was much higher than the control, whose relative activity was only 37%. Real-time quantitative PCR (qPCR) results showed that the promotion of Ton1914 on long-chain DNA was more efficient than that on short-chain DNA when the same concentration of templates was supplemented. The yield of long-chain products was increased by 32-41%, while that of short-chain DNA was only improved by 9.5-15%. Ton1914 also increased the yields of UDP-glucose and UDP-galactose enzymatic synthesis from 40.1% to 84.8% and 20.9% to 35.4%, respectively. These findings suggested that Ton1914 has considerable potential for industrial applications.

The tetrameric structure of nucleotide-regulated pyrophosphatase and its modulation by deletion mutagenesis and ligand binding

A quarter of prokaryotic Family II inorganic pyrophosphatases (PPases) contain a regulatory insert comprised of two cystathionine β-synthase (CBS) domains and one DRTGG domain in addition to the two catalytic domains that form canonical Family II PPases. The CBS domain-containing PPases (CBS-PPases) are allosterically activated or inhibited by adenine nucleotides that cooperatively bind to the CBS domains. Here we use chemical cross-linking and analytical ultracentrifugation to show that CBS-PPases from Desulfitobacterium hafniense and four other bacterial species are active as 200-250-kDa homotetramers, which seems unprecedented among the four PPase families. The tetrameric structure is stabilized by Co²⁺, the essential cofactor, pyrophosphate, the substrate, and adenine nucleotides, including diadenosine tetraphosphate. The deletion variants of dhPPase containing only catalytic or regulatory domains are dimeric. Co²⁺ depletion by incubation with EDTA converts CBS-PPase into inactive tetrameric and dimeric forms. Dissociation of tetrameric CBS-PPase and its catalytic part by dilution renders them inactive. The structure of CBS-PPase tetramer was modelled from the structures of dimeric catalytic and regulatory parts. These findings signify the role of the unique oligomeric structure of CBS-PPase in its multifaced regulation.

Discovery of Allosteric and Selective Inhibitors of Inorganic Pyrophosphatase from Mycobacterium tuberculosis

Inorganic pyrophosphatase (PPiase) is an essential enzyme that hydrolyzes inorganic pyrophosphate (PP_i), driving numerous metabolic processes. We report a discovery of an allosteric inhibitor (2,4-bis(aziridin-1-yl)-6-(1-phenylpyrrol-2-yl)-s-triazine) of bacterial PPiases. Analogues of this lead compound were synthesized to target specifically Mycobacterium tuberculosis (Mtb) PPiase (MtPPiase). The best analogue (compound 16) with a K_i of 11 μM for MtPPiase is a species-specific inhibitor. Crystal structures of MtPPiase in complex with the lead compound and one of its analogues (compound 6) demonstrate that the inhibitors bind in a nonconserved interface between monomers of the hexameric MtPPiase in a yet unprecedented pairwise manner, while the remote conserved active site of the enzyme is occupied by a bound PP_i substrate. Consistent with the structural studies, the kinetic analysis of the most potent inhibitor has indicated that it functions uncompetitively, by binding to the enzyme-substrate complex. The inhibitors appear to allosterically lock the active site in a closed state causing its dysfunctionalization and blocking the hydrolysis. These inhibitors are the first examples of allosteric, species-selective inhibitors of PPiases, serving as a proof-of-principle that PPiases can be selectively targeted.

Archaeal Inorganic Pyrophosphatase Displays Robust Activity under High-Salt Conditions and in Organic Solvents

Soluble inorganic pyrophosphatases (PPAs) that hydrolyze inorganic pyrophosphate (PPi) to orthophosphate (Pi) are commonly used to accelerate and detect biosynthetic reactions that generate PPi as a by-product. Current PPAs are inactivated by high salt concentrations and organic solvents, which limits the extent of their use. Here we report a class A type PPA of the haloarchaeon Haloferax volcanii (HvPPA) that is thermostable and displays robust PPi-hydrolyzing activity under conditions of 25% (vol/vol) organic solvent and salt concentrations from 25 mM to 3 M. HvPPA was purified to homogeneity as a homohexamer by a rapid two-step method and was found to display non-Michaelis-Menten kinetics with a Vmax of 465 U · mg(-1) for PPi hydrolysis (optimal at 42°C and pH 8.5) and Hill coefficients that indicated cooperative binding to PPi and Mg(2+). Similarly to other class A type PPAs, HvPPA was inhibited by sodium fluoride; however, hierarchical clustering and three-dimensional (3D) homology modeling revealed HvPPA to be distinct in structure from characterized PPAs. In particular, HvPPA was highly negative in surface charge, which explained its extreme resistance to organic solvents. To demonstrate that HvPPA could drive thermodynamically unfavorable reactions to completion under conditions of reduced water activity, a novel coupled assay was developed; HvPPA hydrolyzed the PPi by-product generated in 2 M NaCl by UbaA (a "salt-loving" noncanonical E1 enzyme that adenylates ubiquitin-like proteins in the presence of ATP). Overall, we demonstrate HvPPA to be useful for hydrolyzing PPi under conditions of reduced water activity that are a hurdle to current PPA-based technologies.

Cloning, purification, and characterization of inorganic pyrophosphatase from the hyperthermophilic archaea Pyrococcus horikoshii

The gene encoding inorganic pyrophosphatase (PPiase) from the hyperthermophilic archaea Pyrococcus horikoshii (Pho PPiase) was cloned in the Escherichia coli strain BL21/pET15b, and the recombinant PPiase was purified by Ni-chelating chromatography in only an one-step procedure. The PPiase showed optimal activity at 88°C and pH of 10.3. Kinetic analysis revealed Km, kcat, Vm of 14.27μM, 3436s(-1), and 34.35μmol/min/mg protein, respectively. Pho PPiase was stable against denaturant chemicals as well as heat. It retained 19.61% of the original activity after incubation at 100°C for 12h and 25.96% of the original activity in the presence of 8M urea after incubation at 50°C for 120h. Pho PPiase showed high specificity for inorganic pyrophosphate but low reactivity to sodium tripolyphosphate and sodium tetrapolyphosphate. ADP and ATP could not serve as substrates.

Polyphosphate--an ancient energy source and active metabolic regulator

There are a several molecules on Earth that effectively store energy within their covalent bonds, and one of these energy-rich molecules is polyphosphate. In microbial cells, polyphosphate granules are synthesised for both energy and phosphate storage and are degraded to produce nucleotide triphosphate or phosphate. Energy released from these energetic carriers is used by the cell for production of all vital molecules such as amino acids, nucleobases, sugars and lipids. Polyphosphate chains directly regulate some processes in the cell and are used as phosphate donors in gene regulation. These two processes, energetic metabolism and regulation, are orchestrated by polyphosphate kinases. Polyphosphate kinases (PPKs) can currently be categorized into three groups (PPK1, PPK2 and PPK3) according their functionality; they can also be divided into three groups according their homology (EcPPK1, PaPPK2 and ScVTC). This review discusses historical information, similarities and differences, biochemical characteristics, roles in stress response regulation and possible applications in the biotechnology industry of these enzymes. At the end of the review, a hypothesis is discussed in view of synthetic biology applications that states polyphosphate and calcium-rich organelles have endosymbiotic origins from ancient protocells that metabolized polyphosphate.

Archaeal DNA uracil repair via direct strand incision: A minimal system reconstituted from purified components

Hydrolytic deamination of DNA cytosine residues results in U/G mispairs, pre-mutagenic lesions threatening long-term genetic stability. Hence, DNA uracil repair is ubiquitous throughout all extant life forms and base excision repair, triggered by a uracil DNA glycosylase (UDG), is the mechanistic paradigm adopted, as it seems, by all bacteria and eukaryotes and a large fraction of archaea. However, members of the UDG superfamily of enzymes are absent from the extremely thermophilic archaeon Methanothermobacter thermautotrophicus DeltaH. This organism, as a hitherto unique case, initiates repair by direct strand incision next to the DNA-U residue, a reaction catalyzed by the DNA uridine endonuclease Mth212, an ExoIII homologue. To elucidate the detailed mechanism, in particular to identify the molecular partners contributing to this repair process, we reconstituted DNA uracil repair in vitro from only four purified enzymes of M. thermautotrophicus DeltaH. After incision at the 5'-side of a 2'-d-uridine residue by Mth212 DNA polymerase B (mthPolB) is able to take over the 3'-OH terminus and carry out repair synthesis generating a 5'-flap structure that is resolved by mthFEN, a 5'-flap endonuclease. Finally, DNA ligase seals the resulting nick. This defines mechanism and minimal enzymatic requirements of DNA-U repair in this organism.

Characterization of the Family I inorganic pyrophosphatase from Pyrococcus horikoshii OT3

A gene encoding for a putative Family I inorganic pyrophosphatase (PPase, EC 3.6.1.1) from the hyperthermophilic archaeon Pyrococcus horikoshii OT3 was cloned and the biochemical characteristics of the resulting recombinant protein were examined. The gene (Accession No. 1907) from P. horikoshii showed some identity with other Family I inorganic pyrophosphatases from archaea. The recombinant PPase from P. horikoshii (PhPPase) has a molecular mass of 24.5 kDa, determined by SDS-PAGE. This enzyme specifically catalyzed the hydrolysis of pyrophosphate and was sensitive to NaF. The optimum temperature and pH for PPase activity were 70 degrees C and 7.5, respectively. The half-life of heat inactivation was about 50 min at 105 degrees C. The heat stability of PhPPase was enhanced in the presence of Mg2+. A divalent cation was absolutely required for enzyme activity, Mg2+ being most effective; Zn2+, Co2+ and Mn2+ efficiently supported hydrolytic activity in a narrow range of concentrations (0.05-0.5 mM). The K(m) for pyrophosphate and Mg2+ were 113 and 303 microM, respectively; and maximum velocity, V(max), was estimated at 930 U mg(-1).

Bioenergetics of the Archaea

In the late 1970s, on the basis of rRNA phylogeny, Archaea (archaebacteria) was identified as a distinct domain of life besides Bacteria (eubacteria) and Eucarya. Though forming a separate domain, Archaea display an enormous diversity of lifestyles and metabolic capabilities. Many archaeal species are adapted to extreme environments with respect to salinity, temperatures around the boiling point of water, and/or extremely alkaline or acidic pH. This has posed the challenge of studying the molecular and mechanistic bases on which these organisms can cope with such adverse conditions. This review considers our cumulative knowledge on archaeal mechanisms of primary energy conservation, in relationship to those of bacteria and eucarya. Although the universal principle of chemiosmotic energy conservation also holds for Archaea, distinct features have been discovered with respect to novel ion-transducing, membrane-residing protein complexes and the use of novel cofactors in bioenergetics of methanogenesis. From aerobically respiring Archaea, unusual electron-transporting supercomplexes could be isolated and functionally resolved, and a proposal on the organization of archaeal electron transport chains has been presented. The unique functions of archaeal rhodopsins as sensory systems and as proton or chloride pumps have been elucidated on the basis of recent structural information on the atomic scale. Whereas components of methanogenesis and of phototrophic energy transduction in halobacteria appear to be unique to Archaea, respiratory complexes and the ATP synthase exhibit some chimeric features with respect to their evolutionary origin. Nevertheless, archaeal ATP synthases are to be considered distinct members of this family of secondary energy transducers. A major challenge to future investigations is the development of archaeal genetic transformation systems, in order to gain access to the regulation of bioenergetic systems and to overproducers of archaeal membrane proteins as a prerequisite for their crystallization.

Sulfolobus acidocaldarius inorganic pyrophosphatase: structure, thermostability, and effect of metal ion in an archael pyrophosphatase

The first crystal structure of an inorganic pyrophosphatase (S-PPase) from an archaebacterium, the thermophile Sulfolobus acidocaldarius, has been solved by molecular replacement and refined to an R-factor of 19.7% at 2.7 A. S-PPase is a D3 homohexameric protein with one Mg2+ per active site in a position similar to, but not identical with, the first activating metal in mesophilic pyrophosphatases (PPase). In mesophilic PPases, Asp65, Asp70, and Asp102 coordinate the Mg2+, while only Asp65 and Asp102 do in S-PPase, and the Mg2+ moves by 0.7 A. S-PPase may therefore be deactivated at low temperature by mispositioning a key metal ion. The monomer S-PPase structure is very similar to that of Thermus thermophilus (T-PPase) and Escherichia coli (E-PPase), root-mean-square deviations around 1 A/Calpha. But the hexamer structures of S- and T-PPase are more tightly packed and more similar to each other than they are to that of E-PPase, as shown by the increase in surface area buried upon oligomerization. In T-PPase, Arg116 creates an interlocking ionic network to both twofold and threefold related monomers; S-PPase has hydrophilic interactions to threefold related monomers absent in both E- and T-PPase. In addition, the thermostable PPases have about 7% more hydrogen bonds per monomer than E-PPase, and, especially in S-PPase, additional ionic interactions anchor the C-terminus to the rest of the protein. Thermostability in PPases is thus due to subtle improvements in both monomer and oligomer interactions.

The extreme thermostable pyrophosphatase from Sulfolobus acidocaldarius: enzymatic and comparative biophysical characterization

Recombinant pyrophosphatase from the hyperthermophilic archaebacterium Sulfolobus acidocaldarius (S-PPase) has been heterologously expressed in Escherichia coli and could be purified in large quantities. S-PPase, previously described as a tetrameric enzyme, was shown to be a homohexameric protein that had catalytic activity with Mg2+ > Zn2+ > Co2+ >> Mn2+ >> Ni2+, Ca2+. CD and FTIR spectra demonstrate a similar overall fold for S-PPase and PPases from E. coli (E-PPase) and Thermus thermophilus (T-PPase). The relative proportions of secondary structure elements in S-PPase are close to those of a previously proposed model. S-PPase is extremely heat resistant. Even at 95 degrees C the half-life of catalytic activity is 2.5 h, which is dramatically increased in the presence of divalent cations. More than one Mg2+ per monomer is needed for catalysis, but no more than one Mg2+ per monomer is sufficient for thermal stabilization. The Tm values for S-PPase are 89 degrees C (+EDTA), 99 degrees C (+Mg2+), and >100 degrees C (+Mn2+), compared to 58 degrees C (+EDTA), 84 degrees C (+Mg2+), and 93 degrees C (+Mn2+) for E-PPase and 86 degrees C (+EDTA), 99 degrees C (+Mg2+), and 96 degrees C (+Mn2+) for T-PPase. The guanidium hydrochloride-induced unfolding follows an unknown mechanism with a biphasic kinetic and an unstable intermediate. Unfolding curves of the S-, E-, and T-PPase are independent of the method applied (CD spectroscopy and fluorescence) and show a sigmoidal and monophasic transition, indicating a change in global structure during unfolding, which can be described by a two-state process comprising dissociation and denaturation of the folded hexamer into six monomers. The respective DeltaGN-->D(25 degrees C) values of the three PPases vary from 220 to 290 kJ/mol for the overall process and are not significantly higher for the two thermophilic PPases. The stabilizing effect of Mg2+ DeltaDeltaG(25 degrees C) is 16 kJ/mol for E-PPase and 5.5-8 kJ/mol for S-PPase and T-PPase.

Bacillus subtilis ORF yybQ encodes a manganese-dependent inorganic pyrophosphatase with distinctive properties: the first of a new class of soluble pyrophosphatase?

The N-terminal 15 amino acids of the major protein associated with inorganic pyrophosphatase activity in Bacillus subtilis WB600 are identical to those of B. subtilis ORF yybQ. This ORF was amplified from B. subtilis WB600 DNA by PCR and cloned into an overexpression vector in Escherichia coli. Induction of overexpression produced a soluble protein of 34,000 Da by SDS-PAGE and by matrix-assisted laser desorption and ionization mass spectrometry. The overexpressed protein had a high specific activity for the hydrolysis of magnesium pyrophosphate, and was specifically and reversibly activated by Mn2+ ions. These properties are identical to those of inorganic pyrophosphatase purified from B. subtilis WB600. No significant similarity was found between the derived sequence of the B. subtilis yybQ-encoded protein and published sequences of identified inorganic pyrophosphatases of Eukarya, Bacteria or Archaea domains. However, there is significant similarity to three putative proteins of unknown function from the archaea Methanococcus jannaschii and Archaeoglobus fulgidus, and from Streptococcus gordonii. The genomes of B. subtilis, M. jannaschii and A. fulgidus do not contain sequences similar to those of hitherto known soluble inorganic pyrophosphatases. The present findings, together with a survey of the properties of inorganic pyrophosphatases from 38 different sources, suggest that the B. subtilis yybQ-encoded protein is the first fully characterized member of a new class of inorganic pyrophosphatase.

Identification of ATP-dependent phosphofructokinase as a regulatory step in the glycolytic pathway of the actinomycete Streptomyces coelicolor A3(2)

The ATP-dependent phosphofructokinase (ATP-PFK) of Streptomyces coelicolor A3(2) was purified to homogeneity (1,600-fold) and characterized (110 kDa, with a single type of subunit of 40 kDa); it is allosterically inhibited by phosphoenolpyruvate. Cloning of the pfk gene of S. coelicolor A3(2) and analysis of the deduced amino acid sequence (343 amino acids; 36,667 Da) revealed high similarities to the PPi-PFK enzyme from Amycolatopsis methanolica (tetramer, nonallosteric; 70%) and to the allosteric ATP-PFK enzymes from other bacteria, e.g., Escherichia coli (tetramer; 37%) and Bacillus stearothermophilus (tetramer, 41%). Further structural and functional analysis of the two actinomycete PFK enzymes should elucidate the features of these proteins that determine substrate specificity (ATP versus PPi) and allosteric (in)sensitivity.

Some properties of inorganic pyrophosphatase from Bacillus subtilis

Inorganic pyrophosphatase (pyrophosphate phosphohydrolase, EC 3.6.1.1; PPase) from Bacillus subtilis was purified to a homogeneous state electrophoretically when analysed by SDS-PAGE. The enzyme consists of six identical subunits; the molecular weight of the native enzyme estimated by gel filtration was approx. 120,000, and denaturing polyacrylamide gel electrophoresis gave a single band corresponding to 24,000. The enzyme absolutely required a divalent cation for its activity. Mg2+ was most effective, showing two steps of concentration-dependent activation. Mg2+ could be partially replaced by Mn2+ and Co2+. The enzyme was thermostable in the presence of Mg2+, and no loss of activity was observed on the incubation at 55 degrees C for an hour.