Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set

Construction of Au quantum dots/nitrogen-defect-enriched graphite carbon nitride heterostructure via photo-deposition towards enhanced nitric oxide photooxidation

The challenge of mitigating pollution stemming from industrial exhaust emissions is a pressing issue in both academia and industry. This study presents the successful synthesis of nitrogen-defect-enriched graphite carbon nitride (g-C3N4) using a two-step calcination technique. Furthermore, a g-C3N4-Au heterostructure was fabricated through the photo-deposited Au quantum dots (QDs). When subjected to visible light irradiation, this heterostructure exhibited robust nitric oxide (NO) photooxidation activity and stability. With its fluffy, porous structure and large surface area, the nitrogen-defect-enriched g-C3N4 provides more active sites for photooxidation processes. The ability of g-C3N4 to absorb visible light is enhanced by the local surface plasmon resonance (LSPR) effect of Au QDs. Additionally, the lifetime of photogenerated charge carriers is extended by the presence of N defects and Au, which effectively prevent photogenerated electron-hole pairs from recombining during the photooxidation process. Moreover, the oxidation pathway of NO was analyzed through In-situ Fourier transform infrared (FT-IR) spectroscopy and Density Functional Theory (DFT) calculation. Computational findings revealed that the introduction of Au QDs decreases the activation energy of the oxidation reaction, thereby facilitating its occurrence while diminishing the formation of intermediate products. As a result, NO is predominantly converted to nitrate (NO3-). This work unveils a novel approach to constructing semiconductor-cocatalyst heterostructures and elucidates their role in NO photooxidation.

A smartphone-assisted photoelectrochemical POCT method via Z-scheme CuCo2S4/Fe3O4 for simultaneously detecting co-contamination with microplastics in food and the environment

As emerging contaminants, microplastics threaten food and environmental safety. Dibutyl phthalate (DBP, released from microplastics) and benzo[a]pyrene (BaP, adsorbed on microplastics) coexisted in food and the environment, harming human health, requesting a sensitive and simultaneous testing method to monitor. To address current sensitivity, simultaneousness, and on-site portability challenges during dual targets in complex matrixes, CuCo2S4/Fe3O4 nanoflower was designed to develop a smartphone-assisted photoelectrochemical point-of-care test (PEC POCT). The carrier transfer mechanism in CuCo2S4/Fe3O4 was proven via density functional theory calculation. Under optimal conditions, the PEC POCT showed low detection limits of 0.126, and 0.132 pg/mL, wide linearity of 0.001-500, and 0.0005-50 ng/mL for DBP and BaP, respectively. The smartphone-assisted PEC POCT demonstrated satisfied recoveries (80.00%-119.63%) in real samples. Coherent results were recorded by comparing the PEC POCT to GC-MS (DBP) and HPLC (BaP). This novel method provides a practical platform for simultaneous POCT for food safety and environment monitoring.

Construction and catalysis role of a kinetic promoter based on lithium-insertion technology and proton exchange strategy for lithium-sulfur batteries

The high theoretical energy density and specific capacity of lithium-sulfur (Li-S) batteries have garnered considerable attention in the prospective market. However, ongoing research on Li-S batteries appears to have encountered a bottleneck, with unresolved key technical challenges such as the significant shuttle effect and sluggish reaction kinetics. This investigation explores the catalytic efficacy of three catalysts for Li-S batteries and elucidates the correlation between their structure and catalytic impacts. The results suggest that the combined utilization of lithium-insertion technology and a proton exchange approach for δ-MnO2 can optimize its electronic structure, resulting in an optimal catalyst (H/Li inserted δ-MnO2, denoted as HLM) for the sulfur reduction reaction. The replacement of Mn sites in δ-MnO2 with Li atoms can enhance the structural stability of the catalyst, while the introduction of H atoms between transition metal layers contributes to the satisfactory catalytic performance of HLM. Theoretical calculations demonstrate that the bond length of Li2S4 adsorbed by the HLM molecule is elongated, thereby facilitating the dissociation process of Li2S4 and enhancing the reaction kinetics in Li-S batteries. Consequently, the Li-S battery utilizing HLM as a catalyst achieves a high areal specific capacity of 4.2 mAh cm-2 with a sulfur loading of 4.1 mg cm-2 and a low electrolyte/sulfur (E/S) ratio of 8 μL mg-1. This study introduces a methodology for designing effective catalysts that could significantly advance practical developments in Li-S battery technology.

Interfacial engineering layered bimetallic oxyhydroxides for efficient oxygen evolution reaction

Transition metal-based oxyhydroxides (MOOH) have garnered significant attention as promising catalyst for the Oxygen Evolution Reaction (OER). However, the direct synthesis of MOOH poses challenges due to the instability of trivalent cobalt and nickel salts, attrivuted to their high oxidation states. In this study, theoretical computations predicted that Co(OH)2 nanosheets are exclusively formed on carbon structures, owing to the stronger binding energy between CoOOH and CC compared to Co(OH)2. Furthermore, the presence of FeOOH interface reduces the binding energy between CoOOH and carbon structure. Experiment evidence confirms that CoOOH can be directly synthesized through controlled epitaxial growth on an FeOOH interface using a hydrothermal method. Moreover, the in-situ doping of iron leads to the formation of high-quality Fe0.35Co0.65OOH with exceptional OER performance, displaying a low overpotential of 240 mV at 10 mA cm-2 and a small Tafel slope of 43 mV dec-1. Density functional theory (DFT) calculations uncover the substantial enhancement of oxygen-containing species adsorption abilities by Fe0.35Co0.65OOH, resulting in improved OER activity. This work presents a promising strategy for the efficient preparation of layered cobalt oxyhydroxides, enabling efficient energy conversion and storage.

Tuning nitrogen adsorption and activation performances of Three-Atom transition metal clusters by modulating external electric fields

Three-atom transition metal clusters (TATMCs) with remarkable catalytic activities, especially Nb3, Zr3, and Y3, are proven to be suitable candidates for efficient ammonia production. The pursuit of effective strategies to further promote the ammonia synthesis performance of TATMCs is necessary. In this study, we systematically investigate the effect of external electric fields on tuning the N2 adsorption and NN* activation performances of Nb3, Zr3, and Y3. Our findings demonstrate that the medium and low positive fields promote the N2 adsorption performance of Nb3, while both positive and negative fields enhance nitrogen adsorption on Zr3. Additionally, electric fields may impede N2 fixation on Y3, yet the N2 adsorption performance of Y3 remains considerable. Negative electric fields enhance the NN* activation performance of Nb3 and Y3. But only high negative fields weaken the NN bond on Zr3, which is attributed to the promotion of the charge accumulation around two N atoms. Notably, Nb3 and Zr3 are identified as two TATMCs with the potential for simultaneous optimization of their EN and ICOHP values. This work sheds light on the field effects on the N2 adsorption and NN* activation performances of TATMCs and guides the design of catalysts for achieving more sustainable ammonia synthesis.

Interface engineering enabled by sodium dodecyl sulfonate surfactant for stable Zn metal batteries

Aqueous zinc-ion batteries are emerging as powerful candidates for large-scale energy storage, due to their inherent high safety and high theoretical capacity. However, the inevitable hydrogen evolution and side effects of the deposition process limit their lifespan, which requires rational engineering of the interface between anode and aqueous electrolyte. In this paper, an anionic surfactant as electrolyte additive, sodium dodecyl sulfonate (SDS), is introduced to deliver highly reversible zinc metal batteries. Unlike traditional surfactants, the solvation structure is not affected by SDS, which tends to adsorb on the (002) crystal plane of Zn with the purpose of effectively limiting the water molecules adsorption. Attributed to the natural hydrophobic part of SDS, a dynamic electrostatic shielding layer and a unique hydrophobic interface are constructed on the anode. Assisted by the above merits, the adverse surface corrosion, hydrogen evolution and dendrite growth are significantly inhibited without the sacrifice in the deposition kinetics of Zn ions. As a result, the Zn||Zn symmetric batteries demonstrate an increased cycle life of 2000 h (1 mA cm-2, 1 mA h cm-2) with the presence of SDS additive. Such strategy provides a new avenue for the developing advanced electrolytes to be applied in aqueous energy storage systems.

Theoretical calculations and experimental verification of carbon dioxide reduction electrocatalyzed by metalloporphyrin

Metal-functionalized porphyrin-like graphene structures are promising electrocatalysts for carbon dioxide reduction reaction (CO2RR) as their metal centers can modulate activity. Yet, the role of metal center of metalloporphyrins (MTPPs) in CO2 reaction activity is still lacking deep understanding. Here, CO2RR mechanism on MTPPs with five different metal centers (M = Fe, Co, Cu, Zn and Ni) are examined by first-principles calculations. The *COOH formation is the rate determined step on the five MTPP structures, and the CoTPP exhibits the best CO2RR activity while ZnTPP and NiTPP are the worst, which is also verified by our experiment. The CO2RR activity is controlled by adsorption states of intermediates (*CO, *COOH), i.e., chemisorption (e.g., on CoTPP) and physisorption (on ZnTPP and NiTPP) of intermediates will lead to good and poor activity, respectively. The deeper the d-band center of the porphyrin ring complexed metal atom, the weaker bonding of MTPP with CO and COOH. Theoretical calculations and experimental results indicate that MTPPs with Co and Fe centers lead to a reduction in the energy barriers for the two uphill reaction steps in the electrocatalytic CO2 reduction process, thereby enhancing CO2 reduction electrocatalytic activity. Faradaic efficiency of CO is correlated with the reaction energy barrier of the first proton-coupled electron reduction process, displaying a strong linear correlation. This work provides a fundamental understanding of MTPPs used as electrocatalysts for CO2RR.

Upconversion luminescence through dynamically regulating the depletion of Ho3+: 5I6 level for speed sensing

In this work, a strategy for dynamically adjusting the upconversion luminescence (UCL) color of NaGdF4:Yb3+/Ho3+/Ce3+/Sc3+ is reported based on a phosphor wheel. It has been demonstrated that the rotation-dependent UCL mainly originated from the regulation of depletion mode for the Ho3+: 5I6 level. Due to the dominant linear decay, a high-pure red UCL is observed under the steady-state excitation. However, as the proportion of the steady-state excitation decreases, the green-red emission intensity ratio gradually increases, followed by the color conversion from red to green. An approximate physical model is proposed to understand the dependence of IG/IR on rotation speed. We not only report a UCL material that shows potential application in velocity sensing but also provide new insights into wheel-based dynamic UCL regulation.

Near-unity quantum yield and long-term emission stability in halide perovskite nanocrystal glass composite

Metal halide perovskites are promising optoelectronic materials due to their outstanding luminescent properties. However, the instability of perovskites has long been the bottleneck to their practical applications. Here Cs4PbBr6 nanocrystals based glass composite (Cs4PbBr6 NCs@glass) are successfully prepared, which displays green emission color (520 nm), narrow bandwidth (23 nm) and a near-unity photoluminescence quantum yield (PLQY). The H2O molecules permeating in the lattice of Cs4PbBr6 were found to be a crucial role in the subband energy emission. The Cs4PbBr6 NCs@glass has excellent emission stability; maintains 93 % of initial PL intensity after ultraviolet light irradiation for over 5000 h. In addition, by adjusting the halogen content, we have achieved tunable emission color from blue (450 nm) to green (520 nm) and red (670 nm) on Cs4PbX6 NCs@glass (X = Cl, Br, I), which covers up to 127 % of the National Television Systems Board (NTSC) standard system. Our finding indicates the commercial applications of perovskite materials in lighting and display.

First-principles study on the heterogeneous formation of environmentally persistent free radicals (EPFRs) over α-Fe2O3(0001) surface: Effect of oxygen vacancy

Metal oxides with oxygen vacancies have a significant impact on catalytic activity for the transformation of organic pollutants in waste-to-energy (WtE) incineration processes. This study aims to investigate the influence of hematite surface oxygen point defects on the formation of environmentally persistent free radicals (EPFRs) from phenolic compounds based on the first-principles calculations. Two oxygen-deficient conditions were considered: oxygen vacancies at the top surface and on the subsurface. Our simulations indicate that the adsorption strength of phenol on the α-Fe2O3(0001) surface is enhanced by the presence of oxygen vacancies. However, the presence of oxygen vacancies has a negative impact on the dissociation of the phenol molecule, particularly for the surface with a defective point at the top layer. Thermo-kinetic parameters were established over a temperature range of 300-1000 K, and lower reaction rate constants were observed for the scission of phenolic O-H bonds over the oxygen-deficient surfaces compared to the pristine surface. The negative effects caused by the oxygen-deficient conditions could be attributed to the local reduction of FeIII to FeII, which lower the oxidizing ability of surface reaction sites. The findings of this study provide us a promising approach to regulate the formation of EPFRs.

Energy band modulation of Li2O-rGO core-shell as cathode sacrificial additive enables capacity enhancement of hard carbon anode in Li-ion batteries

Lithium oxides (Li2O) possess a considerable theoretical capacity, rendering them highly promising as cathodic pre-lithiation additives. However, its decomposition voltage exceeds the charging cut-off voltage of most cathode materials, hindering its direct use as a cathode sacrificial additive. Herein, we design a facile and safe method to reduce the decomposition energy of Li2O at room temperature to offset the irreversible capacity loss by using a core-shell structured Li2O-reduced graphene oxide (rGO)-polyethylene glycol (PEG) composite (denoted as Li2O-rGO-PEG). The graphene oxide (GO) was heat-treated to remove oxygen functional groups to synthesize rGO, and then reacted with Li2O to form a Li2O-rGO composite. According to the DFT calculations, the density of states at the Fermi level of Li2O-rGO becomes continuous and features a metallic nature, which significantly improves the electrical conductivity of Li2O and facilitates electron conduction that modify the delithiation potential of Li2O. PEG was used to enhance the cohesive force between rGO and Li2O and to protect Li2O from atmospheric contamination. Moreover, in order to demonstrate the excellent pre-lithiation ability of Li2O-rGO-PEG composite, hard carbon (HC) with low initial coulombic efficiency (ICE) was used as the anode. In the application of LFP (Li2O)/HC full cell, Li2O was decomposed to Li+ to effectively improve the initial charge capacity from 149.7 to 200 mAh/g and discharge capacity from 104.2 to 147.5 mAh/g, which are 33.6 % and 41.6 % higher than those of the pristine LFP/HC full cell, respectively. The cathode pre-lithiation method proposed in this work is simple and environmentally friendly. The successful utilization of Li2O as a pre-lithiation additive effectively addressed the issue of low initial coulombic efficiency of the HC, indicating excellent prospects for practical applications.

Constructing a interfacial electric field for efficient reduction of nitrogen to ammonia

Electrochemical nitrogen reduction (eNRR) is a cost-effective and environmentally sustainable approach for ammonia production. MoS2, as a typical layered transition metal compound, holds significant potential as an electrocatalyst for the eNRR. Nevertheless, it suffers from a limited number of active sites and low electron transfer efficiency. In this study, we constructed a heterostructure by depositing SnO2 (an n-type semiconductor) nanoparticles on MoS2 (a p-type semiconductor). This unique interfacial structure not only generates abundant interfacial contacts but also facilitates the transfer of electrons from SnO2 to MoS2, leading to the formation of an interfacial electric field. Theoretical calculations demonstrate that this electric field increases the number of active electrons, facilitating N2 adsorption and NN bond activation. Moreover, it increases the degree of orbital overlap between N2 and SnO2/MoS2, effectively reducing the energy barrier of the rate-determining step. Benefiting from the interfacial electric field effect, the SnO2/MoS2 catalyst exhibits significant catalytic activity and selectivity towards eNRR, with an ammonia yield of 47.1 µg h-1 mg-1 and a Faraday efficiency of 19.3 %, surpassing those reported for the majority of MoS2- and SnO2-based catalysts.

Rational design and construction of hierarchical porous quasi-hexagonal Co2P nanosheets/Co heterostructures as highly efficient bifunctional electrocatalysts for overall water splitting

Constructing heterostructured electrocatalysts has proven effective in enhancing intrinsic catalytic activity. Herein, under guidance of theoretical calculations, hierarchical porous quasi-hexagonal Co2P nanosheets/Co heterostructures supported on carbon cloth (Co2P/Co/CC) with a high surface area were rationally designed and elaborately constructed through electroless Co plating, electrochemical oxidation, and phosphidation process, which showed significant electrocatalytic performance toward water electrolysis. Specifically, theoretical calculations revealed that the Co2P/Co heterostructure adjusted the electronic structure of Co2P and Co, reducing the energy barrier for target reactions and thereby boosting electrocatalytic activities for the hydrogen evolution reaction (HER). Notably, the typical Co2P/Co/CC catalyst demonstrated impressive HER performance, with low overpotentials of only 52 and 48 mV to achieve a current density of 10 mA/cm2 in 0.5 M H2SO4 and 1.0 M KOH solutions, respectively. The remarkable electrocatalytic performance of the catalyst can be attributed to the improved intrinsic activity resulting from the Co2P/Co heterostructures and the highly exposed active sites provided by the hierarchical porous structures. Furthermore, the Co2P/Co/CC catalyst exhibited excellent oxygen evolution reaction (OER) performance in alkaline electrolyte, requiring a low overpotential of only 306 mV to achieve a current density of 100 mA/cm2. Additionally, a two-electrode electrolyzer assembled with the Co2P/Co/CC electrodes achieved a current density of 10 mA/cm2 at a low cell voltage of 1.54 V and demonstrated excellent long-term stability. This work presents a novel and feasible strategy for constructing hierarchical heterostructured electrocatalysts that enable efficient water electrolysis. By combining rational design and theoretical guidance, our approach offers promising prospects for advancing the field of electrocatalysis and facilitating sustainable energy conversion.

Efficient tunable white emission and multiple reversible photoluminescence switching in organic Tin(IV) chlorides via regulating the host lattice environment of antimony ions for multifunctional applications

The host lattice environments of Sb3+ has a great influence on its photophysical properties. Here, we synthesized three zero-dimensional organic metal halides of (TPA)2SbCl5 (1), Sb3+-doped (TPA)SnCl5(H2O)·2H2O (Sb3+-2), and Sb3+-doped (TPA)2SnCl6 (Sb3+-3). Compared with the intense orange emission of 1, Sb3+-3 has smaller lattice distortion, thus effectively suppressing the exciton transformation from singlet to triplet self-trapped exciton (STE) states, which makes Sb3+-3 has stronger singlet STE emission and further bring a white emission with a photoluminescence quantum efficiency (PLQE) of 93.4%. Conversely, the non-emission can be observed in Sb3+-2 even though it has a similar [SbCl5]2- structure to 1, which should be due to its indirect bandgap characteristics and the effective non-radiative relaxation caused by H2O in the lattice. Interestingly, the non-emission of Sb3+-2 can convert into the bright emission of Sb3+-3 under TPACl DMF solution treatment. Meanwhile, the white emission under 315 nm excitation of Sb3+-3 can change into orange emission upon 365 nm irradiation, and the luminescence can be further quenched by the treatment of HCl. Therefore, a triple-mode reversible luminescence switch of off-onI-onII-off can be achieved. Finally, we demonstrated the applications of Sb3+-doped compounds in single-component white light illumination, latent fingerprint detection, fluorescent anti-counterfeiting, and information encryption.

Machine-learning descriptor search on the density of states profile of bimetallic alloy systems and comparison with the d-band center theory

In this study, the electronic density of states (DOSs) calculated with density functional theory (DFT) were analyzed by the machine-learning techniques. More than 400 pure metal and bimetallic alloy systems were calculated with DFT, and obtained the surface DOSs and the CH3 adsorption energy (Ead). By fitting the Gaussian functions to the DOS, multiple descriptors, such as the Gaussian peak positions, heights, and widths were extracted. Several regression methods, such as the least absolute shrinkage of selection operator (LASSO), random-forest, gradient-boosting, and extra-tree were used to find the relationship between these descriptors and the Ead. The results show that the energy position of the peaks in the d-projected DOS is the most important descriptor, in agreement with the previously known d-band center theory. It was also shown that the peak position in d-projected DOS improves the regression model in addition to the d-band center, since it reduces the regression error.

Highly efficient Mn2+, Mg2+, and NH4+ recovery from electrolytic manganese residue via leaching, solvent extraction, coprecipitation, and atmospheric oxidation

Electrolytic manganese residue (EMR), a solid waste generated during electrolytic manganese production, exhibits substantial leaching toxicity owing to its elevated levels of soluble Mn2+ and NH4+. The leaching and recovery of valuable metal ions and NH4+ from EMR are key to the hazard-free treatment and resource utilization of EMR. In this study, two-stage countercurrent leaching with water was used to leach Mn2+, Mg2+, and NH4+ from EMR. Subsequently, two-stage countercurrent extraction was conducted using α-hydroxy-2-ethylhexyl phosphinic acid (α-H-2-EHA) as an extractant to enrich Mn2+, and Mg2+, and NH4+ were recovered via coprecipitation. Based on the calculations for a single leaching-extraction process, the recoveries of Mn2+, Mg2+, and NH4+ ions exceeded 80%, 99%, and 90%, respectively. In addition, high-purity Mn3O4 with an Mn content of 71.61% and struvite were produced. This process represents a win-win strategy that facilitates the hazard-free treatment of EMR while simultaneously recovering valuable Mn2+, Mg2+, and NH4+ resources from waste. Thus, this study provides a novel approach to the hazard-free and resourceful management of solid waste. ENVIRONMENTAL IMPLICATION: Electrolytic manganese residue (EMR), a solid waste generated during electrolytic manganese production, poses significant environmental risks due to its soluble heavy metals and ammonia nitrogen content. Efforts have been made to address this issue, but there has been no mature industrial application due to cost or processing capacity constraints. In this work, solvent extraction was first used to enrich Mn2+ from EMR leachate, and a novel α‑hydroxy‑2‑ethylhexyl phosphinic acid was used as extractant. High purity Mn3O4 and struvite was synthesized through this process. The win‑win strategy offers a novel approach for the hazard‑free and resourceful utilization of solid waste.

Silica-supported ionic liquid for efficient gaseous arsenic oxide removal through hydrogen bonding

The emission of highly-toxic gaseous As2O3 (As2O3 (g)) from nonferrous metal smelting poses environmental concerns. In this study, we prepared an adsorbent (SMIL-X) by loading an ionic liquid (IL) ([HOEtMI]NTf2) into MCM-41 through an impregnation-evaporation process and then applied it to adsorb As2O3 (g). SMIL-20% exhibited an As2O3 (g) adsorption capacity of 35.48 mg/g at 400 °C, which was 490% times higher than that of neat MCM-41. Characterization of SMIL-X indicated that the IL was mainly supported on MCM-41 through O-H…O bonds formed between the hydroxyl groups (-OH) and the silanol groups (Si-OH) and the O-H…F bonds formed between the C-F groups and the Si-OH groups. The hydrogen bonds significantly contributed to the adsorption of As2O3 (g), with -NH and -OH groups forming hydrogen bonds with As-O species (i.e., N-H…O and O-H…O). This showed superior performance to traditional adsorbents that rely on van der Waals forces and chemisorption. Moreover, after exposure to high concentrations of SO2, the adsorption capacities remained at 76% of their initial values, demonstrating some sulfur resistance. This study presents an excellent adsorbent for the purification of As2O3 (g) and shows promising application potential for treating flue gas emitted by nonferrous metal smelting processes.

Recyclable Fe3O4@UiO-66-PDA core-shell nanomaterials for extensive metal ion adsorption: Batch experiments and theoretical analysis

With the ever-increasing challenge of heavy metal pollution, the imperative for developing highly efficient adsorbents has become apparent to remove metal ions from wastewater completely. In this study, we introduce a novel magnetic core-shell adsorbent, Fe3O4@UiO-66-PDA. It features a polydopamine (PDA) modified zirconium-based metal-organic framework (UiO-66) synthesized through a simple solvothermal method. The adsorbent boasts a unique core-shell architecture with a high specific surface area, abundant micropores, and remarkable thermal stability. The adsorption capabilities of six metal ions (Fe3+, Mn2+, Pb2+, Cu2+, Hg2+, and Cd2+) were systematically investigated, guided by the theory of hard and soft acids and bases. Among these, three representative metal ions (Fe3+, Pb2+, and Hg2+) were scrutinized in detail. The activated Fe3O4@UiO-66-PDA exhibited exceptional adsorption capacities for these metal ions, achieving impressive values of 97.99 mg/g, 121.42 mg/g, and 130.72 mg/g, respectively, at pH 5.0. Moreover, the adsorbent demonstrated efficient recovery from aqueous solution using an external magnet, maintaining robust adsorption efficiency (>80%) and stability even after six cycles. To delve deeper into the optimized adsorption of Hg2+, density functional theory (DFT) analysis was employed, revealing an adsorption energy of -2.61 eV for Hg2+. This notable adsorption capacity was primarily attributed to electron interactions and coordination effects. This study offers valuable insights into metal ion adsorption facilitated, by magnetic metal-organic framework (MOF) materials.

Simulation study on functional group-modified Ni-MOF-74 for CH4/N2 adsorption separation

This study employs grand canonical Monte Carlo (GCMC) simulations to investigate the impact of functional group modifications (CH3, OH, NH2, and OLi) on the adsorption performance of CH4/N2 on Ni-MOF-74. The results revealed that functional group modifications significantly increased the adsorption capacity of Ni-MOF-74 for both CH4 and N2. The packed methyl groups in CH3-Ni-MOF-74 create an environment conducive to CH4, leading to the highest CH4 adsorption capacity. The electrostatic potential distribution indicates that the strong electron-donating effect introduced by the alkali metal Li results in the highest electrostatic potential gradient in Li-O-Ni-MOF-74, leading to the strongest adsorption of N2, this is unfavorable for CH4/N2 separation. At 1500 kPa the selectivity order of adsorbents for mixed gases was as follows: CH3-Ni-MOF-74 > NH2-Ni-MOF-74 > OH-Ni-MOF-74 > Ni-MOF-74 > Li-O-Ni-MOF-74. This study highlights that CH3-Ni-MOF-74 possesses optimal CH4 selectivity and adsorption performance. Given the current lack of research on functionalized MOF-74 for the separation of CH4 and N2, the findings of this study will serve as a theoretical guide and provide references for the applications of CH4 adsorption and CH4/N2 separation.

Insight into the effective electrocatalytic sulfide removal from aqueous solutions using surface oxidized stainless-steel anode and its desulfurization mechanism

The electrochemical oxidation of hydrogen sulfide (H2S) has shown its potential for the real application of H2S emission control in wastewater treatment. In this study, a surface corrosion treatment of stainless steel (SS) was optimized by regulate Ni content in the oxide film on the SS AISI 304 surface for sulfide removal. The X-ray photoelectron spectroscopy and linear sweeping voltammetry results indicated a higher Ni content in the oxide film of surface-oxidized stainless steel (SOSS) attributed to a higher sulfide removal potential. Sulfide removal experiment results showed that SS-150 (with 150 s anodic pretreatment) anodes achieved the highest Ni content of 69% with the best sulfide removal efficiency, i.e., 97% within 48 h, which increased by 20% compared to the untreated SS. This study also demonstrated a strategy for in situ removal of deposited sulfur on the anodes by cathodic treatment at -0.38 V vs. RHE to alleviate the common issue of sulfur passivation. Density functional theory (DFT) calculation revealed that NiOOH was the major active species in SS-150 oxide film for a faster sulfide removal rate. The study developed a SS surface modification process for Ni content regulation that contributed to better sulfide removal efficiency.

An interfacial C-S bond bridged S-scheme ZnS/C3N5 for photocatalytic H2 evolution: Opposite internal-electric-field of ZnS/C3N4, increased field strength, and accelerated surface reaction

An interfacial C-S bond bridged ZnS/C3N5 heterojunction was constructed for photocatalytic H2 evolution. Different from traditional type-II ZnS/C3N4 heterojunction, the electron transfer followed S-scheme pathway, due to opposite internal-electric-field (IEF) directions in these two heterojunctions. The C-S bond formation was carefully investigated, and they were susceptive to the preparation temperatures. In photocatalytic reaction, C-S bond was functioned as the "high-speed channel" for electron separation and transfer, and the IEF strength in ZnS/C3N5 was 1.86 × 108 V/m, 2.6 times higher than that in ZnS/C3N4. Moreover, the C-S bond also altered the surface molecular structure of ZnS/C3N5, and hence the surface reaction was accelerated via improving H2O adsorption and activation behaviors. Benefiting from the S-scheme pathway, enhanced IEF strength, and accelerated surface reaction, the photocatalytic H2 production over ZnS/C3N5 reached up to 20.18 mmol/g/h, 3.2 and 2.5 times higher than those of ZnS/C3N4 and ZnS/C3N5-300 without C-S bond.

Room-temperature sulfur doped NiMoO4 with enhanced conductivity and catalytic activity for efficient hydrogen evolution reaction in alkaline media

Transition metal oxides have been acknowledged for their exceptional water splitting capabilities in alkaline electrolytes, however, their catalytic activity is limited by low conductivity. The introduction of sulfur (S) into nickel molybdate (NiMoO4) at room temperature leads to the formation of sulfur-doped NiMoO4 (S-NiMoO4), thereby significantly enhancing the conductivity and facilitating electron transfer in NiMoO4. Furthermore, the introduction of S effectively modulates the electron density state of NiMoO4 and facilitates the formation of highly active catalytic sites characterized by a significantly reduced hydrogen absorption Gibbs free energy (ΔGH*) value of -0.09 eV. The electrocatalyst S-NiMoO4 exhibits remarkable catalytic performance in promoting the hydrogen evolution reaction (HER), displaying a significantly reduced overpotential of 84 mV at a current density of 10 mA cm-2 and maintaining excellent durability at 68 mA cm-2 for 10 h (h). Furthermore, by utilizing the anodic sulfide oxidation reaction (SOR) instead of the sluggish oxygen evolution reaction (OER), the assembled electrolyzer employing S-NiMoO4 as both the cathode and anode need merely 0.8 V to achieve 105 mA cm-2, while simultaneously producing hydrogen gas (H2) and S monomer. This work paves the way for improving electron transfer and activating active sites of metal oxides, thereby enhancing their HER activity.

Nitroxyl radical triggered the construction of a molecular protective layer for achieving durable Zn metal anodes

The issues of dendrite growth, hydrogen evolution reaction, and zinc anode corrosion have significantly hindered the widespread implementation of aqueous zinc-ion batteries (AZIBs). Herein, trace amounts of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) additive is introduced into AZIBs to protect the zinc metal anode. Trace amounts of the TEMPO additive with nitroxyl radical can provide fast Zn2+ transport and anode protection ability by forming an adsorbed molecular layer via Zn-O bond. This interface not only provides strong interfacial compatibility and promotes dynamic transport of Zn2+, but also induces deposition of Zn2+ along Zn (002) plane. Additionally, the molecular protective layer significantly inhibits hydrogen evolution reaction (HER) and corrosion. The Zn anodes achieve high Coulombic efficiency of up to 99.75 % and long-term plating/stripping of more than 1400 h at 1 mA cm-2 and 0.5 mAh cm-2. The Zn//Zn symmetric cell can operate continuously for 2500 h at a current density of 1 mA cm-2 and 1 mAh cm-2, and it can still last for nearly 1400 h even when the current density is increased to 5 mA cm-2. Furthermore, the Zn//V2O5 full cell using TEMPO/ZnSO4 electrolyte effectively maintains a maximum capacity retention rate of 53.4 % even after 1500 cycles at 5 A/g. This innovative strategy introduces trace additive with free radicals into the electrolyte, which may help to achieve large-scale, ultra-long-life, and low-cost AZIBs.

A DFT study on regulating the active center of v-Ti2XT2 MXene through surface modification for efficient nitrogen fixation

The electrochemical conversion of nitrogen to ammonia provides an encouraging method to substitute the traditional Haber-Bosch process, owing to its high efficiency and mild reaction conditions. The search for high-performance catalysts and comprehension of catalytic mechanisms remains significant challenges. Herein, we conduct a systematic theoretical calculation of the NRR performance and mechanism of 24 Ti2XT2 (X = B, C, N; T = F, Cl, Br, I, O, S, Se, Te) MXenes with a T-vacancy to explore the influence of surface functional terminations and non-metallic center elements. Our findings demonstrate that surface functionalization significantly reduces the limiting potential by altering the rate-determining step. This change ranges from -1.24 V (Ti2NF2) to -0.21 V (Ti2BSe2), signifying the remarkable efficacy of modification of the surrounding environment of the exposed transition metal active center in promoting electrocatalytic performance. Detailed investigation of the charge density difference and orbital interaction reveals that the different NRR performance originates from the surface termination and non-metallic atoms regulate the electronic properties of the active Ti atoms. We also introduce the free energy change of *NNH2 (ΔG*NNH2) as a descriptor to predict the performance of NRR, which exhibits satisfactory linear relationship with free energy change of different intermediates and displays favourable volcano plot with limiting potential. Moreover, we highlight the pivotal role of work function in tuning the energy barrier of the rate-determining step, which can be regulated through the surface modification of MXenes. Our study not only offers a comprehensive understanding of the crucial impact of surface modification on the catalytic activities of defective MXenes, but also provides a rational perspective for designing efficient NRR catalysts.

Rational design of covalent organic frameworks/NaTaO3 S-scheme heterostructure for enhanced photocatalytic hydrogen evolution

As a typical perovskite material, NaTaO3 has been regarded as a potential catalyst for photocatalytic hydrogen evolution (PHE) process, due to its excellent photoelectric property and superior chemical stability. However, the photocatalytic activity of pure NaTaO3 was largely restricted by its poor visible-light absorption ability and rapid recombination of photogenerated charge carriers. Therefore, a covalently bonded TpBpy covalent organic framework (COF)/NaTaO3 (TpBpy/NaTaO3) heterostructure was designed and synthesized by the post modification strategy with (3-aminopropyl) triethoxysilane (APTES) and the in situ solvothermal process. Benefiting from the enhanced built-in electric field by the interfacial covalent bonds and the formation of S-scheme heterostructure between TpBpy and NaTaO3, which were proved by the Ar+-cluster depth profile and X-ray photoelectron spectroscopy (XPS), as well as density functional theory (DFT) calculation results, both the charge transfer efficiency and the PHE performance of the TpBpy/NaTaO3 composites were significantly improved. Additionally, the composites exhibited an excellent absorption performance in the visible region, which was also beneficial for the photocatalytic process. As expected, the optimal TpBpy/20%NaTaO3 composite achieved a remarkable hydrogen evolution rate of 17.3 mmol·g-1·h-1 (10 mg of catalyst) under simulated sunlight irradiation, which was about 173 and 2.4 times higher than that of pure NaTaO3 and TpBpy, respectively. This work provided a novel strategy for constructing highly effective and stable semiconductor/COFs heterostructures with strong interfacial interaction for photocatalytic hydrogen evolution.

Effective nitrogen doping of TiO2 polymorphs at mild temperatures for visible-light-responsive hydrogen evolution

Herein, a mild-temperature nitrogen doping route with the urea-derived gaseous species as the active doping agent is proposed to realize visible-light-responsive photocatalytic hydrogen evolution both for the anatase and rutile TiO2. DFT simulations reveal that the cyanic acid (HOCN), derived from the decomposition of urea, plays a curial role in the effective doping of nitrogen in TiO2 at mild temperatures. Photocatalytic performance demonstrates that both the anatase and rutile TiO2 doped at mild temperatures exhibit the highest hydrogen evolution rates, although the ones prepared at high temperatures possess higher absorbance in the visible range. Steady-state and transient surface photovoltage characterizations of these doped TiO2 polymorphs prepared at different temperatures reveal that harsh conditions (high temperature reaction) typically result in the formation of intrinsic defects that are detrimental to the transport of the low-energy visible-light-induced electrons, while the mild-temperature nitrogen-doping could flatten the pristine upward band bending without triggering the formation of Ti3+, thus achieving enhanced visible-light-responsive hydrogen evolution rates. We anticipate that our findings will provide inspiring information for shrinking the gap between the visible-light-absorbance and the visible-light-responsiveness in the band engineering of wide-bandgap metal-oxide photocatalysts.

Single-Atom palladium engineered cobalt nanocomposite for selective aerobic oxidation of sulfides to sulfoxides

Developing efficient catalysts for the selective oxidation of sulfides to sulfoxides using molecular oxygen as the oxidant is a challenging task. Here, we report a novel catalyst comprising a single atom palladium engineered cobalt nanocomposite (denoted as PdCo@NC-800-0.01) for this reaction. The incorporation of single atom palladium effectively transforms an originally inactive cobalt nanocomposite into a highly efficient and selective catalyst for the oxidation of sulfides. This catalyst PdCo@NC-800-0.01 exhibited outstanding performance in the selective oxidation of sulfides to sulfoxides using O2 as the oxidant in the presence of isobutyraldehyde (IBA) under mild conditions, demonstrating high activity and excellent selectivity for a broad spectrum of sulfides with good tolerance toward various functional groups, including those susceptible to oxidation. Furthermore, the catalyst could be easily recovered and reused up to 10 times without any significant loss in activity and selectivity. Comprehensive characterizations and theoretical calculations revealed that the engineering of cobalt nanocomposite with single atom Pd greatly enhanced the ability to adsorb and activate IBA, leading to the generation of the key acyl radical. This radical then reacted with singlet oxygen 1O2 derived from molecular oxygen, producing reactive oxygen species peroxy radical, which ultimately promoted the catalytic performance.

Construction of porous flower-like Ru-doped CoNiFe layered double hydroxide for supercapacitors and oxygen evolution reaction catalysts

In recent years, ternary layered double hydroxide (LDH) has become a research hotspot for electrode materials and oxygen evolution reaction (OER) catalyst due to the enhanced synergistic effect between individual elements. However, the application of LDH is greatly limited by its low electrical conductivity and the disadvantage that nanosheets tend to accumulate and mask the active sites. Herein, a novel Ru-doped CoNiFe - LDH was prepared via a facile hydrothermal method. According to the density functional theory (DFT) calculations, the doping of Ru element could improve electron state density and band gaps of LDH and consequently boosted the electrochemical reaction kinetics as well as electrical conductivity. Furthermore, introduction of Ru atom induced the formation of porous flower-like structures in nanosheets. Compared to CoNiFe - LDH (28.9 m2/g), Ru-doped CoNiFe - LDH performed larger specific surface area of 53.1 m2/g, resulting in more electrochemically active sites. In these case, Ru-doped CoNiFe - LDH demonstrated better energy storage performance of 176.0 mAh/g at 1 A/g compared to original CoNiFe - LDH (78.9 mAh/g at 1 A/g). Besides, the assembled Ru-doped CoNiFe - LDH//activated carbon (AC) device delivered a maximum energy density of 36.4 W h kg-1 at the power density of 740.3 W kg-1 and an outstanding cycle life (78.7 % after 10,000 cycles). Meanwhile, Ru-doped CoNiFe - LDH exhibited lower overpotential (339 mV at 50 mA cm-2) and Tafel slope (93.2 mV dec-1). Therefore, this work provided novel and valuable insights into the rational doping of Ru elements for the controlled synthesis of supercapacitor electrode materials and OER catalysts.

Revealing the Influence of Electron Migration Inside Polymer Electrolyte on Li+ Transport and Interphase Reconfiguration for Li Metal Batteries

The development of highly producible and interfacial compatible in situ polymerized electrolytes for solid-state lithium metal batteries (SSLMBs) have been plagued by insufficient transport kinetics and uncontrollable dendrite propagation. Herein, we seek to explore a rationally designed nanofiber architecture to balance all the criteria of SSLMBs, in which La0.6Sr0.4CoO3-δ (LSC) enriched with high valence-state Co species and oxygen vacancies is developed as electronically conductive nanofillers embedded within ZnO/Zn3N2-functionalized polyimide (Zn-PI) nanofiber framework for the first time, to establish Li+ transport highways for poly vinylene carbonate (PVC) electrolyte and eliminate nonuniform Li deposits. Revealed by characterization and theoretical calculation under electric field, the positive-negative electrical dipole layer in LSC derived from electron migration between Co and O atoms aids in accelerating Li+ diffusion kinetics through densified electric field around filler particle, featuring a remarkable ionic conductivity of 1.50 mS cm-1 at 25 °C and a high Li+ transference number of 0.91 without the risk of electron leakage. Integrating with the preferential sacrifice of ZnO/Zn3N2 on PI nanofiber upon immediate detection of dendritic Li, which takes part in reconfiguring hierarchical SEI chemistry dominated by LixNy/Li-Zn alloy inner layer and LiF outer layer, SSLMBs are further endowed with prolonged cycling lifespan and exceptional rate capability.

On-the-fly training of polynomial machine learning potentials in computing lattice thermal conductivity

The application of first-principles calculations for predicting lattice thermal conductivity (LTC) in crystalline materials, in conjunction with the linearized phonon Boltzmann equation, has gained increasing popularity. In this calculation, the determination of force constants through first-principles calculations is critical for accurate LTC predictions. For material exploration, performing first-principles LTC calculations in a high-throughput manner is now expected, although it requires significant computational resources. To reduce computational demands, we integrated polynomial machine learning potentials on-the-fly during the first-principles LTC calculations. This paper presents a systematic approach to first-principles LTC calculations. We designed and optimized an efficient workflow that integrates multiple modular software packages. We applied this approach to calculate LTCs for 103 compounds of wurtzite, zinc blende, and rocksalt types to evaluate the performance of the polynomial machine learning potentials in LTC calculations. We demonstrate a significant reduction in the computational resources required for the LTC predictions.

Nuclear quantum effects in phase transition between Ice VII and Ice X

The theoretical modeling of high-pressure ice remains challenging owing to the complexity in accurately reflecting its properties attributable to nuclear quantum effects. To explore the nuclear quantum effects of the phase transition between Ice VII and Ice X, we introduce an approach based on ab initio path-integral molecular dynamics. The results indicate that quantum effects facilitate the phase transition, with the observed isotope effects consistent with the experimental outcomes. We demonstrate that quantum effects manifest differently across ice phases: In Ice VII, quantum effects reduce the pressure through the centralization of protons. In contrast, in Ice X, quantum effects increase the pressure owing to the increased kinetic energy of zero-point vibration.

Catalytic ozonation of reverse osmosis concentrate from coking wastewater reuse by surface oxidation over Mn-Ce/γ-Al2O3: Effluent organic matter transformation and its catalytic mechanism

Degradation of organics in high-salinity wastewater is beneficial to meeting the requirement of zero liquid discharge for coking wastewater treatment. Creating efficient and stable performance catalysts for high-salinity wastewater treatment is vital in catalytic ozonation process. Compared with ozonation alone, Mn and Ce co-doped γ-Al2O3 could remarkably enhance activities of catalytic ozonation for chemical oxygen demand (COD) removal (38.9%) of brine derived from a two-stage reverse osmosis treatment. Experimental and theoretical calculation results indicate that introducing Mn could increase the active points of catalyst surface, and introducing Ce could optimize d-band electronic structures and promote the electron transport capacity, enhancing HO• bound to the catalyst surface ([HO•]ads) generation. [HO•]ads plays key roles for degrading the intermediates and transfer them into low molecular weight organics, and further decrease COD, molecular weights and number of organics in reverse osmosis concentrate. Under the same reaction conditions, the presence of Mn/γ-Al2O3 catalyst can reduce ΔO3/ΔCOD by at least 37.6% compared to ozonation alone. Furthermore, Mn-Ce/γ-Al2O3 catalytic ozonation can reduce the ΔO3/ΔCOD from 2.6 of Mn/γ-Al2O3 catalytic ozonation to 0.9 in the case of achieving similar COD removal. Catalytic ozonation has the potential to treat reverse osmosis concentrate derived from bio-treated coking wastewater reclamation.

The Impact of Electron Donating and Withdrawing Groups on Electrochemical Hydrogenolysis and Hydrogenation of Carbonyl Compounds

The hydrogenolysis or hydrodeoxygenation of a carbonyl group, where the C═O group is converted to a CH2 group, is of significant interest in a variety of fields. A challenge in electrochemically achieving hydrogenolysis of a carbonyl group with high selectivity is that electrochemical hydrogenation of a carbonyl group, which converts the C═O group to an alcohol group (CH-OH), is demonstrated not to be the initial step of hydrogenolysis. Instead, hydrogenation and hydrogenolysis occur in parallel, and they are competing reactions. This means that although both hydrogenolysis and hydrogenation require adding H atoms to the carbonyl group, they involve different intermediates formed on the electrode surface. Thus, revealing the difference in intermediates, transition states, and kinetic barriers for hydrogenolysis and hydrogenation pathways is the key to understanding and controlling hydrogenolysis/hydrogenation selectivity of carbonyl compounds. In this study, we aimed to identify features of reactant molecules that can affect their hydrogenolysis/hydrogenation selectivity on a Zn electrode that was previously shown to promote hydrogenolysis over hydrogenation. In particular, we examined the electrochemical reduction of para-substituted benzaldehyde compounds with substituent groups having different electron donating/withdrawing abilities. Our results show a strikingly systematic impact of the substituent group where a stronger electron-donating group promotes hydrogenolysis and a stronger electron-withdrawing group promotes hydrogenation. These experimental results are presented with computational results explaining the substituent effects on the thermodynamics and kinetics of electrochemical hydrogenolysis and hydrogenation pathways, which also provide critically needed information and insights into the transition states involved with these pathways.

Competing Charge Transfer and Screening Effects in Two-Dimensional Ferroelectric Capacitors

Two-dimensional (2D) ferroelectrics promise ultrathin flexible nanoelectronics, typically utilizing a metal-ferroelectric-metal sandwich structure. Electrodes can either contribute free carriers to screen the depolarization field, enhancing nanoscale ferroelectricity, or induce charge doping, disrupting the long-range crystalline order. We explore electrodes' dual roles in 2D ferroelectric capacitors, supported by first-principles calculations covering a range of electrode work functions. Our results reveal volcano-type relationships between ferroelectric-electrode binding affinity and work function, which are further unified by a quadratic scaling between the binding energy and the transferred interfacial charge. At the monolayer limit, charge transfer dictates the ferroelectric stability and switching properties. This general characteristic is confirmed in various 2D ferroelectrics including α-In2Se3, CuInP2S6, and SnTe. As the ferroelectric layer's thickness increases, the capacitor stability evolves from a charge-transfer-dominated state to a screening-dominated state. The delicate interplay between these two effects has important implications for 2D ferroelectric capacitor applications.

Temperature-Driven Rotation Symmetry-Breaking States in an Atomic Kagome Metal KV3Sb5

Kagome lattice AV3Sb5 has attracted tremendous interest because it hosts correlated and topological physics. However, an in-depth understanding of the temperature-driven electronic states in AV3Sb5 is elusive. Here we use scanning tunneling microscopy to directly capture the rotational symmetry-breaking effect in KV3Sb5. Through both topography and spectroscopic imaging of defect-free KV3Sb5, we observe a charge density wave (CDW) phase transition from an a0 × a0 atomic lattice to a robust 2a0 × 2a0 superlattice upon cooling the sample to 60 K. An individual Sb-atom vacancy in KV3Sb5 further gives rise to the local Friedel oscillation (FO), visible as periodic charge modulations in spectroscopic maps. The rotational symmetry of the FO tends to break at the temperature lower than 40 K. Moreover, the FO intensity shows an obvious competition against the intensity of the CDW. Our results reveal a tantalizing electronic nematicity in KV3Sb5, highlighting the multiorbital correlation in the kagome lattice framework.

Ultrastrong Coupling between Polar Distortion and Optical Properties in Ferroelectric MoBr2O2

Tuning the properties of materials by using external stimuli is crucial for developing versatile smart materials. Strong coupling among the order parameters within a single-phase material constitutes a potent foundation for achieving precise property control. However, cross-coupling is fairly weak in most single materials. Leveraging first-principles calculations, we demonstrate a layered mixed anion compound MoBr2O2 that exhibits electric-field switchable spontaneous polarization and ultrastrong coupling between polar distortion and electronic structures as well as optical properties. It offers feasible avenues of achieving tunable Rashba spin-splitting, electrochromism, thermochromism, photochromism, and nonlinear optics by applying an external electric field to a single domain sample and heating, as well as intense light illumination. Additionally, it exhibits an exceptionally large photostrictive effect. These findings not only showcase the feasibility of achieving multiple order parameter coupling within a single material but also pave the way for comprehensive applications based on property control, such as energy harvesting, information processing, and ultrafast control.

Analyzing the Active Site and Predicting the Overall Activity of Alloy Catalysts

As one of the potential catalysts, disordered solid solution alloys can offer a wealth of catalytic sites. However, accurately evaluating their activity localization structure and overall activity from each individual site remains a formidable challenge. Herein, an approach based on density functional theory and machine learning was used to obtain a large number of sites of the Pt-Ru alloy as the model multisite catalyst for the hydrogen evolution reaction. Subsequently, a series of statistical approaches were employed to unveil the relationship between the geometric structure and overall activity. Based on the radial frequency distribution of metal elements and the distribution of ΔGH, we have identified the surface and subsurface sites occupied by Pt and Ru, respectively, as the most active sites. Particularly, the concept of equivalent site ratio predicts that the overall activity is highest when the Ru content is 20-30%. Furthermore, a series of Pt-Ru alloys were synthesized to validate the proposed theory. This provides crucial insights into understanding the origin of catalytic activity in alloys and thus will better guide the rational development of targeted multisite catalysts.

BaCoO2 with Tetrahedral Cobalt Coordination: The Missing Element to Understand Energy Storage and Conversion Applications in BaCoO3-δ-Based Materials

Barium-cobaltate-based perovskite (BaCoO3-δ) and barium-cobaltate-based nanocomposites have been intensively studied in energy storage and conversion devices mainly due to flexible oxygen stoichiometry and tunable nonprecious transition metal oxidation states. Although a rich and complex family of structural polymorphs has already been reported for these perovskites in the literature, the potential structural evolution that may occur during the oxygen reduction reaction and the oxygen evolution reaction has not been investigated so far. In this study, we synthesized and characterized the lowest Co-oxidation state possible in the compound, BaCoO2, which exhibits a quartz-derived, trigonal structure with a helicoidally corner-sharing, CoO4-tetrahedral-framework as already proposed by Spitsbergen et al. Oxygen can reversibly be inserted in such a crystal structure to form BaCoO3-δ, i.e., with 0 ≤ δ ≤ 1, based on the results of an in situ coupled thermogravimetric - neutron diffraction study and which presents therefore giant oxygen capacity storage due to the extreme tunability of the electronic configuration of the cobalt cations which defines the fundamental origins of the materials performance. The reversible conversion of BaCoO2 to BaCoO3-δ associated with a similar electronic conductivity above 900 K permits to clarify the high potential of BaCoO3-δ-based energy storage and conversion devices.

Insight into Interfacial Heat Transfer of β-Ga2O3/Diamond Heterostructures via the Machine Learning Potential

β-Ga2O3 is an ultrawide-band gap semiconductor with excellent potential for high-power and ultraviolet optoelectronic device applications. Low thermal conductivity is one of the major obstacles to enable the full performance of β-Ga2O3-based devices. A promising solution for this problem is to integrate β-Ga2O3 with a diamond heat sink. However, the thermal properties of the β-Ga2O3/diamond heterostructures after the interfacial bonding have not been studied extensively, which are influenced by the crystal orientations and interfacial atoms for the β-Ga2O3 and diamond interfaces. In this work, molecular dynamics simulations based on machine learning potential have been adopted to investigate the crystal-orientation-dependent and interfacial-atom-dependent thermal boundary resistance (TBR) of the β-Ga2O3/diamond heterostructure after interfacial bonding. The differences in TBR at different interfaces are explained in detail through the explorations of thermal conductivity value, thermal conductivity spectra, vibration density of states, and interfacial structures. Based on the above explorations, a further understanding of the influence of different crystal orientations and interfacial atoms on the β-Ga2O3/diamond heterostructure was achieved. Finally, insightful optimization strategies have been proposed in the study, which could pave the way for better thermal design and management of β-Ga2O3/diamond heterostructures according to guidance in the selection of the crystal orientations and interfacial atoms of the β-Ga2O3 and diamond interfaces.

Deciphering the Catalytic Mechanism of Peroxidase-like Activity of Iron Sulfide Nanozymes

Iron sulfide nanomaterials represented by FeS2 and Fe3S4 nanozymes have attracted increasing attention due to their biocompatibility and peroxidase-like (POD-like) catalytic activity in disease diagnosis and treatments. However, the mechanism responsible for their POD-like activities remains unclear. Herein, taking the oxidation of 3,3,5,5-tetramethylbenzidine (TMB) by H2O2 on FeS2(100) and Fe3S4(001) surfaces, the catalytic mechanism was investigated in detail using density functional theory (DFT) calculations and experimental characterizations. Our experimental results showed that the catalytic activity of FeS2 nanozymes was significantly higher than that of Fe3S4 nanozymes. Our DFT calculations indicated that the surface iron ions of iron sulfide nanozymes could effectively catalyze the production of HO• radicals via the interactions between Fe 3d electrons and the frontier orbitals of H2O2 in the range of -10 to 5 eV. However, FeS2 nanozymes exhibited higher POD-like activity due to the surface Fe(II) binding to H2O2, forming inner-orbital complexes, which results in a larger binding energy and a smaller energy barrier for the base-like decomposition of H2O2. In contrast, the surface iron ions of Fe3S4 nanozymes bind to H2O2, forming outer-orbital complexes, which results in a smaller binding energy and a larger energy barrier for the base-like decomposition of H2O2. The charge transfer analysis showed that FeS2 nanozymes transferred 0.12 e and Fe3S4 nanozymes transferred 0.05 e from their surface iron ions to H2O2, respectively. The simulations were consistent with the experimental observations that the FeS2 nanozymes had a greater affinity for H2O2 compared to that of Fe3S4 nanozymes. This work provides a theoretical foundation for the rational design and accurate preparation of iron sulfide functional nanozymes.

Theoretical study of adsorption properties and CO oxidation reaction on surfaces of higher tungsten boride

Most modern catalysts are based on precious metals and rear-earth elements, making some of organic synthesis reactions economically insolvent. Density functional theory calculations are used here to describe several differently oriented surfaces of the higher tungsten boride WB5-x, together with their catalytic activity for the CO oxidation reaction. Based on our findings, WB5-x appears to be an efficient alternative catalyst for CO oxidation. Calculated surface energies allow the use of the Wulff construction to determine the equilibrium shape of WB5-x particles. It is found that the (010) and (101) facets terminated by boron and tungsten, respectively, are the most exposed surfaces for which the adsorption of different gaseous agents (CO, CO2, H2, N2, O2, NO, NO2, H2O, NH3, SO2) is evaluated to reveal promising prospects for applications. CO oxidation on B-rich (010) and W-rich (101) surfaces is further investigated by analyzing the charge redistribution during the adsorption of CO and O2 molecules. It is found that CO oxidation has relatively low energy barriers. The implications of the present results, the effects of WB5-x on CO oxidation and potential application in the automotive, chemical, and mining industries are discussed.

Charge redistribution of a spatially differentiated ferroelectric Bi4Ti3O12 single crystal for photocatalytic overall water splitting

Artificial photosynthesis is a promising approach to produce clean fuels via renewable solar energy. However, it is practically constrained by two issues of slow photogenerated carrier migration and rapid electron/hole recombination. It is also a challenge to achieve a 2:1 ratio of H2 and O2 for overall water splitting. Here we report a rational design of spatially differentiated two-dimensional Bi4Ti3O12 nanosheets to enhance overall water splitting. Such a spatially differentiated structure overcomes the limitation of charge transfer across different crystal planes in a single crystal semiconductor. The experimental results show a redistribution of charge within a crystal plane. The resulting photocatalyst produces 40.3 μmol h-1 of hydrogen and 20.1 μmol h-1 of oxygen at a near stoichiometric ratio of 2:1 and a solar-to-hydrogen efficiency of 0.1% under simulated solar light.

Intermetallics with sp-d orbital hybridisation: morphologies, stabilities and work functions of In-Pd particles at the nanoscale

The field of intermetallic catalysts, alloying a p-block and a transition metal to form a pM-TM bimetallic alloy, is experiencing robust growth, emerging as a vibrant frontier in catalysis research. Although such materials are increasingly used in the form of nanoparticles, a precise description of their atomic arrangements at the nanoscale remains scarce. Based on the In-Pd binary as a typical pM-TM system, we performed density functional theory calculations to investigate the morphologies, relative stabilities and electronic properties of 24 Å and 36 Å nanoparticles built from the In3Pd2, InPd and InPd3 compounds. Wulff equilibrium structures are compared to other ordered and disordered structures. Surface energies are computed to discuss their thermodynamic stability, while work functions are calculated to examine their electronic structures. For any compound, increasing the size leads to the stabilisation of Wulff polyhedra, which are found to offer smaller surface energies than non-crystalline and chemically disordered structures. Disordered In3Pd2 and InPd nanoparticles show a tendency towards amorphisation, owing to repulsive short In-In bonds. Tuning nanoparticles' work functions can be achieved through the control of the surface structure and composition, by virtue of the roughly linear correlation found between the surface composition and the work function which nevertheless includes a certain number of outliers. This work paves the way to rationalisation of both structural and electronic properties of pM-TM nanoparticles.

Exploring Cr and molten salt interfacial interactions for molten salt applications

Molten salts play an important role in various energy-related applications such as high-temperature heat transfer fluids and reaction media. However, the extreme molten salt environment causes the degradation of materials, raising safety and sustainability challenges. A fundamental understanding of material-molten salt interfacial evolution is needed. This work studies the transformation of metallic Cr in molten 50/50 mol% KCl-MgCl2via multi-modal in situ synchrotron X-ray nano-tomography, diffraction and spectroscopy combined with density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. Notably, in addition to the dissolution of Cr in the molten salt to form porous structures, a δ-A15 Cr phase was found to gradually form as a result of the metal-salt interaction. This phase change of Cr is associated with a change in the coordination environment of Cr at the interface. DFT and AIMD simulations provide a basis for understanding the enhanced stability of δ-A15 Cr vs. bcc Cr, by revealing their competitive phase thermodynamics at elevated temperatures and probing the interfacial behavior of the molten salt at relevant facets. This study provides critical insights into the morphological and chemical evolution of metal-molten salt interfaces. The combination of multimodal synchrotron analysis and atomic simulation also offers an opportunity to explore a broader range of systems critical to energy applications.

Structural Diversity in 2-(2-Aminoethyl)pyridine-Based Lead Iodide Hybrids

While 2D metal-organic hybrids have emerged as promising solar absorbers due to their improved moisture stability, their inferior transport properties limit their potential translation into devices. We report a new hybrid containing 2-(2-ammonioethyl)pyridine [(2-AEP)+], forming a 2D hybrid with the composition (2-AEP)2PbI4. The organic bilayer comprises of (2-AEP)+, which is arranged in a face-to-face stacking that promotes π-π interactions between neighboring pyridyl rings. We also demonstrate the structural diversity of 2-(2-aminoethyl)pyridine-based lead iodide hybrids in solution-processed films. This report highlights the importance of solution-processing conditions in trying to obtain single-phase films of hybrids containing dibasic organic species.

Prediction of Feasibility of Polaronic OER on (110) Surface of Rutile TiO2

The polaronic effects at the atomic level hold paramount significance for advancing the efficacy of transition metal oxides in applications pertinent to renewable energy. The lattice-distortion mediated localization of photoexcited carriers in the form of polarons plays a pivotal role in the photocatalysis. This investigation focuses on rutile TiO2, an important material extensively explored for solar energy conversion in artificial photosynthesis, specifically targeting the generation of green H2 through photoelectrochemical (PEC) H2O splitting. By employing Hubbard-U corrected and hybrid density functional theory (DFT) methods, we systematically probe the polaronic effects in the catalysis of oxygen evolution reaction (OER) on the (110) surface of rutile TiO2. Theoretical understanding of polarons within the surface, coupled with simulations of OER at distinct titanium (Ti) and oxygen (O) active sites, reveals diverse polaron formation energies within the lattice sites with strong preference for bulk and surface bridge (Ob) oxygen sites. Moreover, we provide the evidence for the facilitative role of polarons in OER. We find that hole polarons situated at the equatorial oxygen sites near the Ti-active site, along with bridge site hole polarons distal from the Ob active site yield a small reduction in OER overpotential by ~0.06 eV and ~0.12 eV, respectively. However, subsurface, equatorial, and bridge site hole polarons significantly reduce the Ti-active site OER overpotential by ~0.4 eV through the peroxo-type oxygen pathway. We also observe that the presence of hole polarons stabilizes the *OH, *O, and *OOH intermediate species compared to the scenario without hole polarons. Overall, this study provides a detailed mechanistic insight into polaron-mediated OER, offering a promising avenue for improving the catalytic activity of transition metal oxide-based photocatalysts catering to renewable energy requisites.

Nonlinear Optical Effects of Hybrid Antimony(III) Halides Induced by Stereoactive 5s2 Lone Pairs and Trimethylammonium Cations

Organic-inorganic hybrid metal halides have unique optical and electronic properties, which are advantageous in the study of nonlinear optical materials. To investigate the effect of stereoactive lone pair electrons and the induction of organic cations on the structure of hybrid antimony(III) halides on nonlinear optics, we synthesize two noncentrosymmetric hybrid antimony(III)-based halide single crystals (TMA)3Sb2X9 (TMA = NH(CH3)3+, X = Cl, Br) by a room-temperature slow evaporation method, and their single-crystal structures, phase transition, X-ray photoelectron spectroscopy, and energy-band structure calculations are studied. More importantly, second-harmonic generation results of (TMA)3Sb2X9 (X = Cl, Br) are about 0.7 and 0.8 × KH2PO4(KDP), respectively. Interestingly, (TMA)3Sb2Cl9 single crystals undergo a reversible structural transition from Pc (No. 7) at room temperature to P21/c (No. 14) at 400 K, while the (TMA)3Sb2Br9 single crystals belong to the noncentrosymmetric space group R3c (No. 161), which clarifies the previous results. This work not only deepens the understanding of the role in lone pair electrons and organic cations in the structural induction in antimony-based halide perovskite materials but also provides guidance for subsequent nonlinear optical explorations.

Redox Mechanisms upon the Lithiation of Wadsley-Roth Phases

The Wadsley-Roth family of transition metal oxide phases are a promising class of anode materials for Li-ion batteries due to their open crystal structures and their ability to intercalate Li at high rates. Unfortunately, most early transition metal oxides that adopt a Wadsley-Roth crystal structure intercalate Li at voltages that are too high for most battery applications. First-principles electronic structure calculations are performed to elucidate redox mechanisms in Wadsley-Roth phases with the aim of determining how they depend on crystal structure. A comparative study of two very distinct polymorphs of Nb2O5 reveal two redox mechanisms: (i) an atom-centered redox mechanism at early stages of Li intercalation and (ii) a redox mechanism at intermediate to high Li concentrations involving the bonding orbitals of metal-metal dimers formed by edge-sharing Nb cations. Our study motivates several design principles to guide the development of new Wadsley-Roth phases with superior electrochemical properties.

Designing the Interface Layer of Solid Electrolytes for All-Solid-State Lithium Batteries

Li1.3Al0.3Ti1.7(PO4)3 (LATP) is one of the most attractive solid-state electrolytes (SSEs) for application in all-solid-state lithium batteries (ASSLBs) due to its advantages of high ionic conductivity, air stability and low cost. However, the poor interfacial contact and slow Li-ion migration have greatly limited its practical application. Herein, a composite ion-conducting layer is designed at the Li/LATP interface, which a MoS2 film is constructed on LATP via chemical vapor deposition, followed by the introduction of a solid polymer (SP) liquid precursor to form a MoS2@SP protective layer. This protective layer not only achieves a lower Li-ion migration energy barrier, but also adsorbs more Li-ion, which is able to promote interfacial ion transport and improve interfacial contacts. Thanks to the improved migration and adsorption of Li-ion, the Li symmetric cell containing LATP-MoS2@SP exhibits a stable cycle of more than 1200 h at 0.1 mA cm-2. More remarkably, the capacity retention of the full cell assembled with LiFePO4 cathode is as high as 86.2% after 400 cycles at 1 C. This work provides a design strategy for significantly improving unstable interfaces of SSEs and realizing high-performance ASSLBs.

High-Resolution 17O Solid-State NMR as a Unique Probe for Investigating Oxalate Binding Modes in Materials: The Case Study of Calcium Oxalate Biominerals

Oxalate ligands are found in many classes of materials, including energy storage materials and biominerals. Determining their local environments at the atomic scale is thus paramount to establishing the structure and properties of numerous phases. Here, we show that high-resolution 17O solid-state NMR is a valuable asset for investigating the structure of crystalline oxalate systems. First, an efficient 17O-enrichment procedure of oxalate ligands is demonstrated using mechanochemistry. Then, 17O-enriched oxalates were used for the synthesis of the biologically relevant calcium oxalate monohydrate (COM) phase, enabling the analysis of its structure and heat-induced phase transitions by high-resolution 17O NMR. Studies of the low-temperature COM form (LT-COM), using magnetic fields from 9.4 to 35.2 T, as well as 13C-17O MQ/D-RINEPT and 17O{1H} MQ/REDOR experiments, enabled the 8 inequivalent oxygen sites of the oxalates to be resolved, and tentatively assigned. The structural changes upon heat treatment of COM were also followed by high-resolution 17O NMR, providing new insight into the structures of the high-temperature form (HT-COM) and anhydrous calcium oxalate α-phase (α-COA), including the presence of structural disorder in the latter case. Overall, this work highlights the ease associated with 17O-enrichment of oxalate oxygens, and how it enables high-resolution solid-state NMR, for "NMR crystallography" investigations.