Review on nanomaterials-enabled electrochemical sensors for ascorbic acid detection

High performance Pt-anchored MoS2based chemiresistive ascorbic acid sensor

Ascorbic acid (AA), known as vitamin C, is a vital bioactive compound that plays a crucial role in several metabolic processes, including the synthesis of collagen and neurotransmitters, the removal of harmful free radicals, and the uptake of iron by cells in the human intestines. As a result, there is an absolute need for a highly selective, sensitive, and economically viable sensing platform for AA detection. Herein, we demonstrate a Pt-decorated MoS2for efficient detection of an AA biosensor. MoS2hollow rectangular structures were synthesized using an easy and inexpensive chemical vapor deposition approach to meet the increasing need for a reliable detection platform. The synthesized MoS2hollow rectangular structures are characterized through field effect scanning electron microscopy (FESEM), energy-dispersive spectroscopy elemental mapping, Raman spectroscopy, and x-ray photoelectron spectroscopy. We fabricate a chemiresistive biosensor based on Pt-decorated MoS2that measures AA with great precision and high sensitivity. The experiments were designed to evaluate the response of the Pt-decorated MoS2biosensor in the presence and absence of AA, and selectivity was evaluated for a variety of biomolecules, and it was observed to be very selective towards AA. The Pt-MoS2device had a higher response of 125% against 1 mM concentration of AA biomolecules, when compared to that of all other devices and 2.2 times higher than that of the pristine MoS2device. The outcomes of this study demonstrate the efficacy of Pt-decorated MoS2as a promising material for AA detection. This research contributes to the ongoing efforts to enhance our capabilities in monitoring and detecting AA, fostering advancements in environmental, biomedical, and industrial applications.

Graphene and Natural Products: A Review of Antioxidant Properties in Graphene Oxide Reduction

This review article addresses the antioxidant properties of different natural products, including ascorbic acid, gallic acid, oxalic acid, L-glutathione (GSH), bacteriorhodopsin, green tea polyphenols, glucose, hydroxycinnamic acid, ethanoic acid, betanin, and L-glutathione, in the reduction of graphene oxide (rGO). rGO can cause damage to cells, including oxidative stress and inflammation, limiting its application in different sectors that use graphene, such as technologies used in medicine and dentistry. The natural substances reviewed have properties that help reduce this damage, neutralizing free radicals and maintaining cellular integrity. This survey demonstrates that the combination of these antioxidant compounds can be an effective strategy to minimize the harmful effects of rGO and promote cellular health.

Microfluidic chemistry assisted synthesis of cobalt quantum dot embedded nitrogen doped carbon with oxidase-like properties toward ascorbic acid detection

Ascorbic acid (AA) is a powerful antioxidant in food safety and disease treatment. It is of great significance to develop a low-cost, high-stability, and easy-to-operate colorimetric method for quantitative detection of AA in food or human body. Although various nanozymes have been developed for the colorimetric detection of AA, the size regulation of the catalytic center of nanozymes remains a challenge. In this work, we propose a combined strategy of flow chemistry synthesis and pyrolysis to realize the controllable adjustment of the catalytic center size of nanozymes. Zinc-cobalt zeolitic imidazole frameworks (ZnCo-ZIFs) with different sizes are synthesized by flow chemistry. Nitrogen-doped carbon materials with different Co catalytic centers (80 nm-10 nm) are then obtained by pyrolysis of ZnCo-ZIFs precursors. Among them, cobalt quantum dot embedded nitrogen-doped carbon (Co QDs/N-C) exhibits excellent oxidase activity, with Vmax and Km of 4.19 × 10-7 M s-1 and 0.12 mM. Therefore, a simple, low-cost, and stable colorimetric method for the detection of AA is established with a good linear relationship (3-500 μM) and low detection limit (0.40 μM). This work has certain guiding significance for the size regulation of catalytic center of nanozyme, and the detection method has broad application prospects in biochemical sensing field.

A Review on Recent Trends and Future Developments in Electrochemical Sensing

Electrochemical methods and devices have ignited prodigious interest for sensing and monitoring. The greatest challenge for science is far from meeting the expectations of consumers. Electrodes made of two-dimensional (2D) materials such as graphene, metal-organic frameworks, MXene, and transition metal dichalcogenides as well as alternative electrochemical sensing methods offer potential to improve selectivity, sensitivity, detection limit, and response time. Moreover, these advancements have accelerated the development of wearable and point-of-care electrochemical sensors, opening new possibilities and pathways for their applications. This Review presents a critical discussion of the recent developments and trends in electrochemical sensing.

Development of a Method for Multisensory Stripping Voltammetry in the Analysis of Medical Preparations

For the effective dosage of newly developed ophthalmic drugs, an assessment of the dynamics of their concentration in lacrimal fluid over time is required. To express the detection and identification of drugs, new methods are needed that must meet numerous requirements, not the least of which are selectivity, speed, the absence of false-negative results, and cost-effectiveness. The possibility of identifying anesthetics (sevoflurane) in lacrimal fluid has been studied using a new electrochemical method of multisensory inversion voltammetry in the electronic tongue and electronic nose format. The measurements were performed on a planar electrode, which is a three-electrode structure. The solution of the test system consisted of 0.05 M KCl, which contained the metal cations Zn2+, Cd2+, Pb2+, Co2+, and Hg2+ at a concentration of 5 × 10-5 M. It is shown that this method is effective for the determination of anesthetics, and the dynamics of changes in their concentration over time are examined. This study aimed to research the behavioral pharmacokinetics in the lacrimal fluid of the opioid drug sevoflurane in pediatric ophthalmology using multisensory stripping voltammetry in patients during strabismus correction surgery. The dynamics of changes in their concentrations over time were examined. After the instillation of the anesthetics in patients, their concentrations in the tear fluid remained unchanged within 10 min. The list of organic substances that can be determined by multisensory stripping voltammetry has been extended. The class of organic substances determined by the method of multisensory inversion voltammetry has been expanded.

Highly efficient carbon supported Co-Ir nanozyme for the determination of total antioxidant capacity in foods

Nanozyme-based colorimetric assays have aroused extensive attention in biosensing due to quick response, low cost and simplicity. However, their practical applications are limited by the unsatisfactory stability and catalytic activity of nanozymes in complex detection environments. Herein, using the one-pot chemical vapor deposition method, we successfully prepare a highly efficient and stable carbon supported Co-Ir nanozyme (termed as Co-Ir/C nanozyme) for the determination of total antioxidant capacity (TAC) in food samples. The Co-Ir/C nanozyme shows excellent durability under extensive pH ranges, high temperature and high salt concentration due to the protection of carbon supporter. It can be recycled by simple magnetic separation, and its catalytic activity remains stable after long-term operation and storage. Taking full advantage of the superior peroxidase-like activity of Co-Ir/C nanozyme, it is used for colorimetric detection of ascorbic acid (or known as vitamin C), an important vitamin to adjust body's normal physiological function, with results showing higher sensitivity (detection limit of 0.27 μM) than most of the recently published works. Moreover, the determination of TAC in vitamin C tablets and fruits are further achieved, which are in good agreement with those of commercial colorimetric test kits. This study helps guide the rational preparation of versatile and highly stable nanozymes, and develops a robust TAC determination platform for future food quality monitoring.

Nonenzymatic Flexible Wearable Biosensors for Vitamin C Monitoring in Sweat

Nutritional status monitoring plays an important role in the maintenance of human health and disease prevention. Monitoring the intake of vitamins can support the improvement of diet behavior. In this work, a polyaniline (PANI) film-based nonenzymatic electrochemical sensor was prepared to track the vitamin C level in sweat. The PANI film was modified with organic acids (ethylformic acid, malic acid, tartaric acid, and phytic acid). The phytic acid-modified PANI film based on sensor has a wide detection range (0.5-500 μmol·L^-1), high sensitivity (665.5 and 326.2 μA·(mmol·L^-1)^-1·cm^-2), and low detection limit (0.17 μmol·L^-1) toward vitamin C in sweat. The phytate enhances the band transport between PANI chains, which increases the electrical conductivity of the film to improve the electrochemical properties of the sensor. In addition, we monitored changes of vitamin C levels in human body after taking vitamin C pills by detecting sweat or saliva. The ability to track the pharmacological profile demonstrates the potential of PANI film-based sensors for applications in personalized nutritional intake and tracking. And a simple and portable vitamin C detection system was developed to improve the practicability of the sensor. This work provides an idea for the application of wearable electrochemical sensing devices in nutrition guidance.

Multiwalled Carbon Nanotubes-Modified Metallic Electrode Prepared Using Chemical Vapor Deposition as Sequential Injection Analysis Detector for Determination of Ascorbic Acid

A carbon nanotubes modified silver electrode (CNTs-Ag) was prepared via catalytic chemical vapor deposition and characterized. The morphology, crystallinity, elemental composition, and other quality parameters of the prepared electrode were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman techniques. The characterization results revealed the modification of the silver metal surface with CNTs of good characteristics. A sequential injection analysis (SIA) system was developed for studying the reaction of ascorbic acid with KIO₃ using the prepared CNTs-Ag electrode. Electrodes were polarized with both direct current (DC) and periodic square wave (SW). Various experimental conditions affecting the differential electrolytic potentiometric (DEP) peak such as current density, SW bias value, and flow rate were appraised. Under the optimum conditions, good linear responses for ascorbic acid were obtained in the range of 60.0-850.0 µM for both types of polarization with detection limits of 14.0-19.0 µM. The results obtained showed that the periodic polarization method was more sensitive than DC polarization and the electrode response was faster. Ascorbic acid in pharmaceutical tablets was determined with satisfactory results using this method. The prepared CNTs-based electrode exhibited good performance for a long period of use. The method is simple, rapid, and inexpensive for routine analysis.

Hierarchical copper-based metal-organic frameworks nanosheet assemblies for electrochemical ascorbic acid sensing

Noninvasive human health monitoring requires the development of efficient electrochemical sensors for the quantitative analysis of infinitesimal biomolecules. In this work, we reported a novel hierarchical nanosheet assemblies (HSA) of copper-based metal-organic frameworks (MOFs) as an electrochemical sensor for ascorbic acid (AA) detection. Copper 1,4-benzenedicarboxylate (CuBDC) HSA was constructed by three steps of in situ growth on stone paper, including hydrolysis, anion exchange, and heteroepitaxy growth. The monodispersed two-dimensional MOFs nanosheet units were aligned in an orderly manner and arranged into three-dimensional hierarchical assemblies. The CuBDC HSA-based AA sensor displayed a high sensitivity of 396.8 μA mM^-1 cm^-2 and a low detection limit of 0.1 μM. Excellent selectivity, stability and reproducibility were also obtained. Benefiting from the advantages of ultrathin nanosheets and nature-inspired hierarchy, this unique architecture facilitated reactant dispersion and maximized the accessible active sites and charge-transport capability and thus had superior catalytic ability for the electro-oxidation of ascorbic acid compared to bulk MOFs. Moreover, the CuBDC HSA sensor performed AA level detection in juice samples with acceptable accuracy and verified the feasibility for sweat AA sensing. This novel MOFs architecture holds great potential as an electrochemical sensor to detect AA for noninvasive human health monitoring in the future.

Dual-functional lanthanide-MOF probe nanocomposite based on hydroxyapatite nanowires as fluorescent sensor for ascorbic acid

A dual-functional lanthanide-MOF nanocomposite probe was designed and constructed for the detection of ascorbic acid (AA). The magnetically functionalized hydroxyapatite nanowires are selected as the carriers and simultaneously loaded with ciprofloxacin (CIP) and terbium metal organic framework to form the internal reference fluorescence probe nanocomposite (Fe₃O₄-HAPNWs-Tb/MOF-CIP). This dual-functional lanthanide-MOF probe not only combines the respectively unique fluorescence properties of lanthanide MOFs and CIP, but also takes full advantage of the rapid separation properties of the magnetic component. Structural and spectroscopic characterization results have demonstrated the successful synthesis of probe material and the fluorescence mechanism. At a suitable excitation wavelength (295 nm), the probe can simultaneously emit characteristic fluorescence of CIP (445 nm) and Tb³⁺ (543 nm). In the presence of AA, the ratio of I₅₄₃/I₄₄₅ decreases rapidly with increasing of AA concentration. The linear range of determination is 0.3-40 μM with a detection limit of 20.4 nM. The contents of AA in vitamin C tablets and four fruit juice samples were detected by the composite probe. The spiked recoveries ranged from 82.6 to 104.2% with relative standard deviations (RSD) less than 2.1%, revealing the practical application value of the developed sensor in healthcare and food fields. A novel internal reference fluorescence sensor (Fe O -HAPNWs-Tb/MOF-CIP) was constructed for detecting ascorbic acid by solvothermal and self-assembly techniques, showing excellent selectivity and sensitivity based on the different responses of Tb/MOF and CIP to the target.

2D Phthalocyanine-Assembled Porous Nanostructure-Based Electrochemical Platform for High-Efficiency Detection of Ascorbic Acid

In this work, a novel two-dimensional (2D) porous nanostructure is constructed upon air/water interfacial assembly of 12-crown-ether-4-incorporated double-decker phthalocyanine (Pc2). The combination of the good electroconductivity of phthalocyanine and the great surface area of the porous structure endows the assembled film with excellent chemical sensing property for ascorbic acid (AA). The low limit of detection can be 0.15 μM with a large linear concentration range and strong anti-interfering ability, which can be comparable to the best results of tetrapyrrole-based electrochemical sensors for AA. Furthermore, the obtained 2D porous assembled film sensor can be applied in real-time monitoring of AA in commercial drinks, indicating its application potential in accurate detection of AA in real samples.

Detection of Periodontal Disease Marker with Geometrical Transformation of Ag Nanoplates

Alkaline phosphatase (ALP) and interleukin-1beta (IL-1β) are crucial salivary biomarkers for the diagnosis of periodontal disease that harms the periodontal tissue along with tooth loss. However, there has been no way of sensitive and portable detection of both biomarkers in saliva with multivariate signal readout. In this work, we design the multicolorimetric ALP and IL-1β sensing platform based on geometrical transformation of silver nanoplate transducer. By utilizing enzymatic activity of ALP that dephosphorylates p-aminophenol phosphate (p-APP) to p-aminophenol (p-AP), localized surface plasmon resonance properties of silver nanoplate vary with ALP and show a distinct color change from blue to yellow based on a controlled seed transformation from triangular to hexagonal, rounded pentagonal, and spherical shape. The multicolor sensor shows an ALP detection range of 0-25 U/L with a limit of detection (LOD) of 0.0011 U/L, which is the lowest range of LOD demonstrated to date for state-of-the-art ALP sensor. Furthermore, we integrate the sensor with the conventional ELISA to detect IL-1β for multicolor signaling and it exhibits a linear detection range of 0-250 pg/mL and an LOD of 0.066 pg/mL, which is 2 orders of magnitude lower than the monochromic conventional ELISA (LOD of 3.8 pg/mL). The ALP multicolor sensor shows high selectivity with a recovery of 100.9% in real human saliva proving its reliability and suitability for the readily accessible periodontal diagnosis with multivariate signal readout.

Environment-Friendly Ascorbic Acid Fuel Cell

Recently, ascorbic acid (AA) has been studied as an environment-friendly fuel for energy conversion devices. This review article has deliberated an overview of ascorbic acid electrooxidation and diverse ion exchange types of AA-based fuel cells for the first time. Metal and carbon-based catalysts generated remarkable energy from environment-friendly AA fuel. The possibility of using AA in a direct liquid fuel cell (DLFC) without emitting any hazardous pollutants is discussed. AA fuel cells have been reviewed based on carbon nanomaterials, alloys/bimetallic nanoparticles, and precious and nonprecious metal nanoparticles. Finally, the obstacles and opportunities for using AA-based fuel cells in practical applications have also been incorporated.

Cation-Exchange in Metal-Organic Framework as a Strategy to Obtain New Material for Ascorbic Acid Detection

Ascorbic acid (AA) is an important biomolecule, the deficiency or maladjustment of which is associated with the symptoms of many diseases (e.g., cardiovascular disease or cancer). Therefore, there is a need to develop a fluorescent probe capable of detecting AA in aqueous media. Here, we report the synthesis, structural, and spectroscopic characterization (by means of, e.g., XRD, XPS, IR and Raman spectroscopy, TG, SEM, and EDS analyses), as well as the photoluminescent properties of a metal-organic framework (MOF) based on Cu²⁺ and Eu³⁺ ions. The ion-exchange process of the extraframework cation in anionic Cu-based MOF is proposed as an appropriate strategy to obtain a new material with a nondisturbed structure and a sensitivity to interaction with AA. Accordingly, a novel Eu[Cu₃(μ₃-OH)(μ₃-4-carboxypyrazolato)₃] compound for the selective optical detection of AA with a short detection time of 5 min is described.

Recent advances in nanomaterials-based optical sensors for detection of various biomarkers (inorganic species, organic and biomolecules)

This review briefly emphasizes the different detection approaches (electrochemical sensors, chemiluminescence, surface-enhanced Raman scattering), functional nanostructure materials (quantum dots, metal nanoparticles, metal nanoclusters, magnetic nanomaterials, metal oxide nanoparticles, polymer-based nanomaterials, and carbonaceous nanomaterials) and detection mechanisms. Further, this review emphasis on the integration of functional nanomaterials with optical spectroscopic techniques for the identification of various biomarkers (nucleic acids, glucose, uric acid, oxytocin, dopamine, ascorbic acid, bilirubin, spermine, serotonin, thiocyanate, Pb²⁺ , Cu²⁺ , Hg²⁺ , F^- , peptides, and cancer biomarkers (mucin 1, prostate specific antigen, carcinoembryonic antigen, CA15-3, human epidermal growth factor receptor 2, C-reactive protein, and interleukin-6). Analytical characteristics of nanomaterials-based optical sensors are summarized in Tables, providing the insights of nanomaterials-based optical sensors for biomarkers detection. Finally, the opportunities and challenges of nanomaterials-based optical analytical approaches for the detection of various biomarkers (inorganic, organic, biomolecules, peptides and proteins) are discussed.

Rapid electrochemical detection of MiRNA-21 facilitated by the excellent catalytic ability of Pt@CeO2 nanospheres

Pt@CeO2 nanospheres (NSs) were first synthesized by simply mixing Ce(NO3)3 and K2PtCl4 under the protection of pure argon at 70 °C for 1 h, which exhibited excellent catalytic ability toward hydrogen peroxide (H2O2). An electrochemical biosensor was successfully developed using Pt@CeO2 NSs as a capture probe for the ultra-sensitive and fast detection of miRNA-21, a new type of biomarker for disease diagnostics, especially for cancer. During the step-by-step construction process of the RNA sensor, Pt@CeO2 NSs were functionalized with streptavidin (SA) to obtain SA-Pt@CeO2 NSs through amide bonds. Gold nanoparticles (Au NPs) were electrodeposited on the surface of the glassy carbon electrode to improve the transmission capacity of electrons and provided Au atoms for fixing the thiolated capture probe (SH-CP) with a hairpin structure on the electrode via forming Au-S bonds. The target miRNA-21 specifically hybridized with SH-CP and opened the hairpin structure to form a rigid duplex so as to activate the biotin at the end of the capture probe. SA-Pt@CeO2 NSs were thus specially attached to the electrode surface through the biotin-streptavidin affinity interaction, finally leading to the significant signal amplification. The ultra-sensitive and rapid detection of miRNA-21 was finally realized as expected benefiting from the excellent catalytic ability of Pt@CeO2 NSs toward H2O2 in a wide linear concentration range from 10 fM to 1 nM with the detection limit as low as 1.41 fM. The results achieved with this new RNA sensor were quite satisfactory during the blood sample analysis.

Recent advances in carbon nanomaterials-based electrochemical sensors for food azo dyes detection

Azo dyes as widely applied food colorants are popular for their stability and affordability. On the other hand, many of these dyes can have harmful impacts on living organs, which underscores the need to control the content of this group of dyes in food. Among the various analytical approaches for detecting the azo dyes, special attention has been paid to electro-analytical techniques for reasons such as admirable sensitivity, excellent selectivity, reproducibility, miniaturization, green nature, low cost, less time to prepare and detect of specimens and the ability to modify the electrode. Satisfactory results have been obtained so far for carbon-based nanomaterials in the fabrication of electrochemical sensing systems in detecting the levels of these materials in various specimens. The purpose of this review article is to investigate carbon nanomaterial-supported techniques for electrochemical sensing systems on the analysis of azo dyes in food samples in terms of carbon nanomaterials used, like carbon nanotubes (CNT) and grapheme (Gr).

Ascorbic Acid Sensor Based on CdS QDs@PDA Fluorescence Resonance Energy Transfer

An ascorbic acid (AA) sensor was constructed based on the fluorescence resonance energy transfer (FRET) between CdS quantum dots (CdS QDs) and polydopamine (PDA) to detect trace AA sensitively. FRET occurred due to the broad absorption spectrum of PDA completely overlapped with the narrow emission spectrum of CdS QDs. The fluorescence of CdS QDs was quenched and in the "off" state. When AA was present, the conversion of DA to PDA was hindered and the FRET disappeared, resulting in the fluorescence of CdS QDs in an "on" state. Importantly, the degree of fluorescence recovery of CdS QDs displayed a desirable linear correlation with the concentration of AA in the range of 5.0-100.0 μmol/L, the linear equation is y=0.0119cAA+0.3113, and the detection limit is 1.16 μmol/L (S/N = 3, n = 9). There was almost no interference with common amino acid, glucose and biological sulfhydryl small molecules to AA. Trace amount of AA in vitamin C tablets were determined and satisfactory results were obtained; the recoveries were observed to be 98.01-100.7%.

Highly sensitive and low-cost colourimetric detection of glucose and ascorbic acid based on silver nanozyme biosynthesized by Gleditsia australis fruit

In this study, a simple, eco-friendly and low-cost approach was used to fabricate silver nanoparticles (AgNPs) from an aqueous extract of Gleditsia australis (GA) fruit. The nanoparticles synthesized in the optimal condition have an average size of 14 nm. The peroxidase-like activity of GA-AgNP in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in combination with hydrogen peroxide (H₂O₂) was investigated. Further, optimal conditions for the use of peroxidase-like catalytic activity in sensing applications were identified. The colourimetric detection of H₂O₂ showed a linear range of 1-8 mM with a limit of detection (LOD) of 0.34 mM. The oxidation of TMB (red-TMB) enables the detection of glucose, which is converted into H₂O₂ and gluconic acid in the presence of the enzyme glucose oxidase. The observations showed linearity from 0.05 to 1.5 mM with a LOD of 0.038 mM. Moreover, the blue colour of oxidized TMB (ox-TMB) was reduced according to ascorbic acid (AA) concentration, with a linear range of 0.03-0.14 mM and a LOD of 3.0 μM. The practical use of the sensing system for the detection of AA was studied using real fruit juice and showed good sensitivity. Hence, the easy-to-use peroxidase-like sensor provides a new platform for the detection of bioactive compounds in biological systems.

A portable ascorbic acid in sweat analysis system based on highly crystalline conductive nickel-based metal-organic framework (Ni-MOF)

Conductive metal-organic frameworks can provide unique porous structures, large pore volumes, many catalytically active sites and high crystallinity, and so are becoming increasingly important and attractive as electrocatalytic materials. The present work synthesized nanorods of the conductive compound Ni₃(2,3,6,7,10,11-hexaiminotriphenylene)₂ (Ni₃(HITP)₂) with a high degree of crystallinity from HITP ligands and Ni²⁺ ions. Screen-printed electrodes made with this material were employed to fabricate an enzyme-free sensor for the detection of ascorbic acid (AA). The sensor exhibited good catalytic activity during the electrocatalytic analysis of AA in alkaline media, attributed to the synergistic effect of highly active Ni-N₄ catalytic sites in the nanorods, the two-dimensional superimposed honeycomb lattice of the Ni₃(HITP)₂, and the large specific surface area of this material. The latter property facilitated efficient electron transfer during catalytic oxidation. A portable electrochemical AA detection system was developed using Ni₃(HITP)₂ as the electrode material together with application-specific integrated circuits and a smartphone application with App. Good sensing performance was obtained, including a wide linear range (2-200 μM) with high sensitivity (0.814 μA μM^-1 cm^-2), and low detection limit (1 μM). This system can be used to monitor AA levels and trends in sweat to assess vitamin C intake as a part of personal health management.

Ultrasensitive multiwall carbon nanotube-mesoporous MCM-41 hybrid-based platform for the electrochemical detection of ascorbic acid

An ultrasensitive multiwall carbon nanotube-MCM-41 hybrid-based ascorbic acid sensor for electro-detection in real samples is proposed. The MWCNT–MCM-41 hybrid preparation via dispersion was optimized through an experimental design based on CCD/RSM.

Noble-metal-free single-phase Co3V2O8 with the structural integrity of nanofibers for the selective detection of ascorbic acid

Single-phase Co3V2O8 with the structural integrity of nanofiber exhibits high electrocatalytic activity for the oxidation of ascorbic acid (AA).

Physical and Chemical Sensors on the Basis of Laser-Induced Graphene: Mechanisms, Applications, and Perspectives

Laser-induced graphene (LIG) is produced rapidly by directly irradiating carbonaceous precursors, and it naturally exhibits as a three-dimensional porous structure. Due to advantages such as simple preparation, time-saving, environmental friendliness, low cost, and expanding categories of raw materials, LIG and its derivatives have achieved broad applications in sensors. This has been witnessed in various fields such as wearable devices, disease diagnosis, intelligent robots, and pollution detection. However, despite LIG sensors having demonstrated an excellent capability to monitor physical and chemical parameters, the systematic review of synthesis, sensing mechanisms, and applications of them combined with comparison against other preparation approaches of graphene is still lacking. Here, graphene-based sensors for physical, biological, and chemical detection are reviewed first, followed by the introduction of general preparation methods for the laser-induced method to yield graphene. The preparation and advantages of LIG, sensing mechanisms, and the properties of different types of emerging LIG-based sensors are comprehensively reviewed. Finally, possible solutions to the problems and challenges of preparing LIG and LIG-based sensors are proposed. This review may serve as a detailed reference to guide the development of LIG-based sensors that possess properties for future smart sensors in health care, environmental protection, and industrial production.

Electrocatalytic Properties of Ni(II) Schiff Base Complex Polymer Films

Platinum electrodes were modified with polymers of the (±)-trans-N,N'-bis(salicylidene)-1,2-cyclohexanediaminenickel(II) ([Ni(salcn)]) and (±)-trans-N,N'-bis(3,3'-tert-Bu-salicylidene)-1,2-cyclohexanediaminenickel(II) ([Ni(salcn(Bu))]) complexes to study their electrocatalytic and electroanalytical properties. Poly[Ni(salcn)] and poly[Ni(salcn(Bu))]) modified electrodes catalyze the oxidation of catechol, aspartic acid and NO2-. In the case of poly[Ni(salcn)] modified electrodes, the electrocatalysis process depends on the electroactive surface coverage. The films with low electroactive surface coverage are only a barrier in the path of the reducer to the electrode surface. The films with more electroactive surface coverage ensure both electrocatalysis inside the film and oxidation of the reducer directly on the electrode surface. In the films with the most electroactive surface coverage, electrocatalysis occurs only at the polymer-solution interface. The analysis was based on cyclic voltammetry, EQCM (electrochemical quartz crystal microbalance) and rotating disc electrode method.

Multicolor diagnosis of salivary alkaline phosphatase triggered by silver-coated gold nanobipyramids

Alkaline phosphatase (ALP) is one of the most versatile biomarkers for early detection of several diseases, such as oral carcinomas and periodontitis; therefore, great efforts have been dedicated for developing an ALP biosensor. Multicolor detection of ALP in saliva is ideal for a point-of-care diagnosis; however, this approach is very challenging since spectral responses over wavelengths of several tens of nanometers have thus far remained difficult to achieve. In this work, a colorimetric biosensor for ALP assay has been developed based on ALP affinity to dephosphorylate glucose phosphate into glucose, which has the affinity to deposit Ag nanoshells onto Au nanobipyramids with a multicolor response. This approach provides a blue shift of localized surface plasmon resonance (LSPR) as large as 190 nm corresponding to distinctive color changes, from yellowish brown to red based on the thickness of the formed Ag shell around the Au nanobipyramids. The change in the LSPR has been conducted for highly sensitive quantitative bioassay of ALP with a detectable multicolor change with linear dynamic range of 0.1-20 U/L and low limit of detection (LOD) of 0.085 U/L. Furthermore, the developed multicolor ALP biosensor exhibits high selectivity with high recovery of 98.6% demonstrating  its reliability and suitability for a point-of-care diagnosis.

Gold Nanoparticles/Carbon Nanotubes and Gold Nanoporous as Novel Electrochemical Platforms for L-Ascorbic Acid Detection: Comparative Performance and Application

Herein, the effects of nanostructured modifications of a gold electrode surface in the development of electrochemical sensors for L-ascorbic acid detection have been investigated. In particular, a bare gold electrode has been modified by electrodeposition of gold single-walled carbon nanotubes (Au/SWCNTs) and by the formation of a highly nanoporous gold (h-nPG) film. The procedure has been realized by sweeping the potential between +0.8 V and 0 V vs. Ag/AgCl for 25 scans in a suspension containing 5 mg/mL of SWCNTs in 10 mM HAuCl4 and 2.5 M NH4Cl solution for Au/SWCNTs modified gold electrode. A similar procedure was applied for a h-nPG electrode in a 10 mM HAuCl4 solution containing 2.5 M NH4Cl, followed by applying a fixed potential of −4 V vs. Ag/AgCl for 60 s. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the properties of the modified electrodes. The developed sensors showed strong electrocatalytic activity towards ascorbic acid oxidation with enhanced sensitivities of 1.7 × 10−2 μA μM−1cm−2 and 2.5 × 10−2 μA μM−1cm−2 for Au/SWCNTs and h-nPG modified electrode, respectively, compared to bare gold electrode (1.0 × 10−2 μA μM−1cm−2). The detection limits were estimated to be 3.1 and 1.8 μM, respectively. The h-nPG electrode was successfully used to determine ascorbic acid in human urine with no significant interference and with satisfactory recovery levels.

A novel nonenzymatic ascorbic acid electrochemical sensor based on gold nanoparticals-chicken egg white-copper phosphate-graphene oxide hybrid nanoflowers

Au-CEW-Cu₃(PO₄)₂-GO nanoflowers (HNFs), which were assembled of gold nanoparticals (Au NPs), chicken egg white (CEW), copper phosphate (Cu₃(PO₄)₂) and graphene oxide (GO) together to form a flower-like organic/inorganic hybrid nanocomposite, were synthesized through a simple and gentle one-pot co-precipitation method. The prepared samples were well characterized by scanning electron microscope, transmission electron microscope, energy dispersive x-ray spectrometer, x-ray diffraction and Raman spectrometer. The prepared Au-CEW-Cu₃(PO₄)₂-GO HNFs was used to modify glassy carbon electrode to fabricate an electrochemical sensor for detection of ascorbic acid (AA). The electrochemical test results show that the linear range of the developed sensor is 8-300μM and the detection limit is 2.67μM (S/N = 3). While this sensor displays high sensitivity of 6.01 × 10^-3μAμM^-1cm^-2and low detection potential of 35 mV due to the combination of the high conductivity of Au NPs, the larger specific surface area of GO and the intrinsic electrocatalytic activity of CEW-Cu₃(PO₄)₂HNFs. Moreover, the Au-CEW-Cu₃(PO₄)₂-GO HNFs-based sensor was successfully developed for application in electrochemical detection of AA in vitamin C tablets.

A colorimetric alkaline phosphatase biosensor based on p-aminophenol-mediated growth of silver nanoparticles

Alkaline phosphatase (ALP) is an enzyme that catalyzes the dephosphorylation of proteins, nucleic acids, and biomolecules. It is a potential biomarker for diverse diseases such as breast cancer, osteopenia, and hepatobiliary. Herein, we developed a colorimetric sensor for the ALP assay based on its enzymatic activity to dephosphorylate the p-aminophenol phosphate (pAPP) into pAP. In a solution containing silver nanoparticles (AgNPs) and Ag⁺ ions prepared using a low concentration of NaBH₄, pAP mediates the growth of AgNPs by reducing the concentration of Ag⁺ ions to enhance the intensity of localized surface plasmon resonance as the pAPP cannot induce a reduction of the remaining Ag⁺ due to the masking of the hydroxyl with phosphate. The quantitative assay of the ALP was demonstrated via the colorimetric detection of the pAP-mediated growth of AgNPs in the presence of an ALP. The highly sensitive enzymatic growth of AgNPs provided a wider dynamic linear range of 0.5-225 U/L with a lower limit of detection of 0.24 U/L than that previously reported. The use of pAP resulted in excellent selectivity of the sensor for the ALP assay in human serum, yielding a high recovery rate and a high precision of 99.2 ± 1.5 % for the standard addition method.

A digital microfluidic platform based on a near-infrared light-responsive shape-memory micropillar array

In this work, we developed a digital microfluidic platform based on a shape memory micropillar array responsive to near-infrared light, and the droplets were programmatically manipulated through light-induced micropillar deformation. The micropillar array was constructed on the surface of a poly(ethylene-vinyl acetate) copolymer, a shape memory polymer sensitive to near-infrared light. Before droplet manipulation, the micropillar array was kept temporarily tilted by heating and pressing. Under the irradiation of a near-infrared laser, the micropillar array achieved the transition from the temporary shape to the original shape. Temperature gradient and micropillar deformation caused by near-infrared light irradiation produce the driving force for droplet movement. The movement of the laser mounted on an electronically controlled displacement platform was controlled by a computer to achieve the programmed control of the droplets. Moreover, we demonstrated light-manipulated droplet movement and fusion, and achieved ascorbic acid detection using this digital microfluidic platform. In particular, the micropillar array chip is able to manipulate droplets in a wide range of 0.1 μL to 10 μL. The proposed digital microfluidic platform will broaden the application of digital microfluidic technology in analytical chemistry and biomedicine.

Vitamin C-Sources, Physiological Role, Kinetics, Deficiency, Use, Toxicity, and Determination

Vitamin C (L-ascorbic acid) has been known as an antioxidant for most people. However, its physiological role is much larger and encompasses very different processes ranging from facilitation of iron absorption through involvement in hormones and carnitine synthesis for important roles in epigenetic processes. Contrarily, high doses act as a pro-oxidant than an anti-oxidant. This may also be the reason why plasma levels are meticulously regulated on the level of absorption and excretion in the kidney. Interestingly, most cells contain vitamin C in millimolar concentrations, which is much higher than its plasma concentrations, and compared to other vitamins. The role of vitamin C is well demonstrated by miscellaneous symptoms of its absence—scurvy. The only clinically well-documented indication for vitamin C is scurvy. The effects of vitamin C administration on cancer, cardiovascular diseases, and infections are rather minor or even debatable in the general population. Vitamin C is relatively safe, but caution should be given to the administration of high doses, which can cause overt side effects in some susceptible patients (e.g., oxalate renal stones). Lastly, analytical methods for its determination with advantages and pitfalls are also discussed in this review.

Application of biosynthesized metal nanoparticles in electrochemical sensors

Recently, the development of eco-friendly, cost-effective and reliable methods for synthesis of metal nanoparticles has drawn a considerable attention. The so-called green synthesis, using mild reaction conditions and natural resources as plant extracts and microorganisms, has established as a convenient, sustainable, cheap and environmentally safe approach for synthesis of a wide range of nanomaterials. Over the past decade, biosynthesis is regarded as an important tool for reducing the harmful effects of traditional nanoparticle synthesis methods commonly used in laboratories and industry. This review emphasizes the significance of biosynthesized metal nanoparticles in the field of electrochemical sensing. There is increasing evidence that green synthesis of nanoparticles provides a new direction in designing of cost-effective, highly sensitive and selective electrode-catalysts applicable in food, clinical and environmental analysis. The article is based on 157 references and provided a detailed overview on the main approaches for green synthesis of metal nanoparticles and their applications in designing of electrochemical sensor devices. Important operational characteristics including sensitivity, dynamic range, limit of detection, as well as data on stability and reproducibility of sensors have also been covered.

Nanomaterials in Electrochemical Sensing Area: Applications and Challenges in Food Analysis

Recently, nanomaterials have received increasing attention due to their unique physical and chemical properties, which make them of considerable interest for applications in many fields, such as biotechnology, optics, electronics, and catalysis. The development of nanomaterials has proven fundamental for the development of smart electrochemical sensors to be used in different application fields such, as biomedical, environmental, and food analysis. In fact, they showed high performances in terms of sensitivity and selectivity. In this report, we present a survey of the application of different nanomaterials and nanocomposites with tailored morphological properties as sensing platforms for food analysis. Particular attention has been devoted to the sensors developed with nanomaterials such as carbon-based nanomaterials, metallic nanomaterials, and related nanocomposites. Finally, several examples of sensors for the detection of some analytes present in food and beverages, such as some hydroxycinnamic acids (caffeic acid, chlorogenic acid, and rosmarinic acid), caffeine (CAF), ascorbic acid (AA), and nitrite are reported and evidenced.