Composite poly(dimethylsiloxane)/glass microfluidic system with an immobilized enzymatic particle-bed reactor and sequential sample injection for chemiluminescence determinations

Flow analysis with chemiluminescence detection: Recent advances and applications

This article highlights the most important developments in flow analysis with chemiluminescence (CL) detection, describing different flow systems that are compatible with CL detection, detector designs, commonly applied CL reactions and approaches to sample treatment. Recent applications of flow analysis with CL detection (focusing on outputs published since 2010) are also presented. Applications are classified by sample matrix, covering foods and beverages, environmental matrices, pharmaceuticals and biological fluids. Comprehensive tables are provided for each area, listing the specific sample matrix, CL reaction used, linear range, limit of detection and sample treatment for each analyte. Finally, recent and emerging trends in the field are also discussed.

Facile and sensitive chemiluminescence detection of H2O2 and glucose by a gravity/capillary flow and cloth-based low-cost platform

A gravity/capillary flow and cloth-based low-cost platform is proposed for the facile and sensitive chemiluminescence detection of H₂O₂ and glucose.

Flow-based analysis using microfluidics-chemiluminescence systems

This review will discuss various approaches and techniques in which analysis using microfluidics-chemiluminescence systems (MF-CL) has been reported. A variety of applications is examined, including environmental, pharmaceutical, biological, food and herbal analysis. Reported uses of CL reagents, sample introduction techniques, sample pretreatment methods, CL signal enhancement and detection systems are discussed. A hydrodynamic pumping system is predominately used for these applications. However, several reports are available in which electro-osmotic (EO) pumping has been implemented. Various sample pretreatment methods have been used, including liquid-liquid extraction, solid-phase extraction and molecularly imprinted polymers. A wide range of innovative techniques has been reported for CL signal enhancement. Most of these techniques are based on enhancement of the mixing process in the microfluidics channels, which leads to enhancement of the CL signal. However, other techniques are also reported, such as mirror reaction, liquid core waveguide, on-line pre-derivatization and the use of an opaque white chip with a thin transparent seal. Photodetectors are the most commonly used detectors; however, other detection systems have also been used, including integrated electrochemiluminescence (ECL) and organic photodiodes (OPDs).

Rapid determination of vitamin B12 concentration with a chemiluminescence lab on a chip

This paper reports a novel method for the rapid determination of vitamin B(12) concentration in a continuous-flow lab-on-a-chip system. This new method is based on luminol-peroxide chemiluminescence (CL) assays for the detection of cobalt(II) ions in vitamin B(12) molecules. The lab-on-a-chip device consisted of two passive micromixers acting as microreactors and a double spiral microchannel network serving as an optical detection region. This system could operate in two modes. In the first mode, samples are acidified and evaluated directly in the microchip. In the second mode, samples are treated externally by acidification prior to detection in the microchip. In the first mode, the linear range obtained was between 1.00 ng ml(-1) to 10 μg ml(-1), R(2) = 0.996, with a relative standard deviation (RSD) of 1.23 to 2.31% (n = 5) and a limit of detection (lod) of 0.368 pg ml(-1). The minimum sample volume required and the analytical time were 30 μl and 3.6 s, respectively. In the second mode, the linear range obtained was between 0.10 ng ml(-1) to 10 μg ml(-1), R(2) = 0.994, with the RSD of 0.90 to 2.32% (n = 6) and a lod of 0.576 pg ml(-1). The minimum sample and the analytical time required were 50 μl and 6 s, respectively. The lab on a chip working in mode II was successfully used for the determination of vitamin B(12) concentrations in nutritional supplemental tablets and hen egg yolks.

A magnetically active microfluidic device for chemiluminescence bioassays

Highly active horseradish peroxidase functionalized magnetic nanoparticles were prepared and packed into a microfluidic channel, producing an in-line bioreactor that enabled a sensitive chemiluminescence assay of H(2)O(2). The proposed magnetically active microfluidic device proved useful for chemiluminescence assays of biomedically interesting compounds.

Passive micromixer for luminol-peroxide chemiluminescence detection

This paper reports a microchip with an integrated passive micromixer based on chaotic advection. The micromixer with staggered herringbone structures was used for luminol-peroxide chemiluminescence detection. The micromixer was examined to assess its suitability for chemiluminescence reaction. The relationship between the flow rate and the location of maximum chemiluminescence intensity was investigated. The light intensity was detected using an optical fiber attached along the mixing channel and a photon detector. A linear correlation between chemiluminescence intensity and the concentration of cobalt(ii) ions or hydrogen peroxide was observed. This microchip has a potential application in environmental monitoring for industries involved in heavy metals and in medical diagnostics.

Radiative flux from a multiple-point bioluminescent or chemiluminescent source within a cylindrical reactor incident on a planar-circular coaxial detector. II. Rotationally symmetric radiation

In the previous paper [J. Opt. Soc. Am. A 28, 126 (2011)], an analytical formula was presented for calculating radiative fluxes from arbitrarily distributed and arbitrarily radiating multiple-point emitters of bioluminescent or chemiluminescent sources within cylindrical reactors, when the radiation from these point emitters propagates through two homogeneous isotropic media and reaches a planar-circular coaxial detector. This formula was based on two assumptions. The first is that radiation passes across a planar boundary interface between the two media. The second is that the surface reflections on the lateral surface and on the reactor base opposite the detector may be neglected. In this paper, the formula obtained previously was simplified for the case of uniformly distributed point emitters of bioluminescent or chemiluminescent sources emitting an identical rotationally symmetric radiation. The simplified formula is suitable for optimizing and calibrating the analyzed reactor-detector system, which is most commonly used to study the bioluminescence emitted by small biological objects and the chemiluminescence from chemical reactions. Representative data were calculated, illustrated graphically, and tabulated.

Recent advances in proteolysis and peptide/protein separation by chromatographic strategies

This review gives a broad glance on the progress of recent advances on proteolysis and peptide/protein separation by chromatographic strategies in the past ten years, covering the main research in these areas especially in China. The reviewed research focused on enzymatic micro-reactors and peptide separation in bottom-up approaches, and protein and peptide separation in top-down approaches. The new enzymatic micro-reactor is able to accelerate proteolytic reaction rate from conventionally a couple of hours to a few seconds, and the multiple dimensional chromatographic-separation with various models or arrays could sufficiently separate the proteomic mixture. These advances have significantly promoted the research of protein/peptide separation and identification in proteomics.

Chemiluminescence resonance energy transfer-based detection for microchip electrophoresis

Since the channels in micro- and nanofluidic devices are extremely small, a sensitive detection is required following microchip electrophoresis (MCE). This work describes a highly sensitive and yet universal detection scheme based on chemiluminescence resonance energy transfer (CRET) for MCE. It was found that an efficient CRET occurred between a luminol donor and a CdTe quantum dot (QD) acceptor in the luminol-NaBrO-QD system and that it was sensitively suppressed by the presence of certain organic compounds of biological interest including biogenic amines and thiols, amino acids, organic acids, and steroids. These findings allowed developing sensitive MCE-CL assays for the tested compounds. The proposed MCE-CL methods showed desired analytical figures of merit such as a wide concentration range of linear response. Detection limits obtained were approximately 10(-9) M for biogenic amines including dopamine and epinephrine and approximately 10(-8) M for biogenic thiols (e.g., glutathione and acetylcysteine), organic acids (i.e., ascorbic acid and uric acid), estrogens, and native amino acids. These were 10-1000 times more sensitive than those of previously reported MCE-based methods with chemiluminescence, electrochemical, or laser-induced fluorescence detection for quantifying corresponding compounds. To evaluate the applicability of the present MCE-CL method for analyzing real biological samples, it was used to determine amino acids in individual human red blood cells. Nine amino acids, including Lys, Ser, Ala, Glu, Trp, etc., were detected. The contents ranged from 3 to 31 amol/cell. The assay proved to be simple, quick, reproducible, and very sensitive.

A microfluidic flow injection system for DNA assay with fluids driven by an on-chip integrated pump based on capillary and evaporation effects

A miniaturized flow injection analysis (FIA) system integrating a micropump on a microfluidic chip based on capillary and evaporation effects was developed. The pump was made by fixing a filter paper plug with a vent tube at the channel end, it requires no peripheral equipment and provides steady flow in the microl min(-1) range for FIA operation. Valve-free sample injection was achieved at nanolitre level using an array of slotted vials. The practical applicability of the system was demonstrated by DNA assay with laser-induced fluorescence (LIF) detection. A precision of 1.6% RSD (10.0 ng microl(-1), n=15) was achieved with a sampling throughput of 76 h(-1) and sample consumption of 95 nl.

Microfluidic conductimetric bioreactor

A microfluidic conductimetric bioreactor has been developed. Enzyme was immobilized in the microfluidic channel on poly-dimethylsiloxane (PDMS) surface via covalent binding method. The detection unit consisted of two gold electrodes and a laboratory-built conductimetric transducer to monitor the increase in the conductivity of the solution due to the change of the charges generated by the enzyme-substrate catalytic reaction. Urea-urease was used as a representative analyte-enzyme system. Under optimum conditions urea could be determined with a detection limit of 0.09 mM and linearity in the range of 0.1-10 mM (r=0.9944). The immobilized urease on the microchannel chip provided good stability (>30 days of operation time) and good repeatability with an R.S.D. lower than 2.3%. Good agreement was obtained when urea concentrations of human serum samples determined by the microfluidic flow injection conductimetric bioreactor system were compared to those obtained using the Berthelot reaction (P<0.05). After prolong use the immobilized enzyme could be removed from the PDMS microchannel chip enabling new active enzyme to be immobilized and the chip to be reused.

Unconventional detection methods for microfluidic devices

The direction of modern analytical techniques is to push for lower detection limits, improved selectivity and sensitivity, faster analysis time, higher throughput, and more inexpensive analysis systems with ever-decreasing sample volumes. These very ambitious goals are exacerbated by the need to reduce the overall size of the device and the instrumentation - the quest for functional micrototal analysis systems epitomizes this. Microfluidic devices fabricated in glass, and more recently, in a variety of polymers, brings us a step closer to being able to achieve these stringent goals and to realize the economical fabrication of sophisticated instrumentation. However, this places a significant burden on the detection systems associated with microchip-based analysis systems. There is a need for a universal detector that can efficiently detect sample analytes in real time and with minimal sample manipulation steps, such as lengthy labeling protocols. This review highlights the advances in uncommon or less frequently used detection methods associated with microfluidic devices. As a result, the three most common methods - LIF, electrochemical, and mass spectrometric techniques - are omitted in order to focus on the more esoteric detection methods reported in the literature over the last 2 years.

Enzymatic microreactors in chemical analysis and kinetic studies

The fields of application of microreactors are becoming wider every year. A considerable number of papers have been published recently reporting successful application of enzymatic microreactors in chemistry and biochemistry. Most are devices with enzymes immobilized on beads or walls of microfluidic channels, whilst some use dissolved enzymes to run a reaction in the microfluidic system. Apart from model systems, mostly with glucose oxidase, horseradish peroxidase and alkaline phosphatase, the principal fields of application of microreactors are tryptic digestion of proteins and polymerase chain reaction in automated analyses of proteomic and genetic material, respectively. Enzymatic microreactors also facilitate characterization of enzyme activity as a function of substrate concentration, and enable fast screening of new biocatalysts and their substrates. They may constitute key parts of lab-on-a-chip and muTAS, assisting the analysis of biomolecules. This review provides systematic coverage of examples of reports on enzymatic microreactors published recently, as well as relevant older papers.

Disposable polydimethylsiloxane/silicon hybrid chips for protein detection

This paper presents disposable protein analysis chips with single- or four-chamber-constructed from poly(dimethylsiloxane) (PDMS) and silicon. The chips are composed of a multilayer stack of PDMS layers that sandwich a silicon microchip. This inner silicon chip features an etched array of micro-cavities hosting polymeric beads. The sample is introduced into the fluid network through the top PDMS layer, where it is directed to the bead chamber. After reaction of the analyte with the probe beads, the signal generated on the beads is captured with a CCD camera, digitally processed, and analyzed. An established bead-based fluorescent assay for C-reactive protein (CRP) was used here to characterize these hybrid chips. The detection limit of the single-chamber protein chip was found to be 1 ng/ml. Additionally, using a back pressure compensation method, the signals from each chamber of the four-chamber chip were found to fall within 10% of each other.

Immobilized microfluidic enzymatic reactors

The use of enzymes for cleavage, synthesis or chemical modification represents one of the most common processes used in biochemical and molecular biology laboratories. The continuing progress in medical research, genomics, proteomics, and related emerging biotechnology fields leads to exponential growth of the applications of enzymes and the development of modified or new enzymes with specific activities. Concurrently, new technologies are being developed to improve reaction rates and specificity or perform the reaction in a specific environment. Besides large-scale industrial applications, where typically a large processing capacity is required, there are other, much lower-scale applications, benefiting form the new developments in enzymology. One such technology is microfluidics with the potential to revolutionize analytical instrumentation for the analyses of very small sample amounts, single cells or even subcellular assemblies. This article aims at reviewing the current status of the development of the immobilized microfluidic enzymatic reactors (IMERs) technology.