Polychlorinated biphenyls (PCBs) detection in milk samples by an electrochemical magneto-immunosensor (EMI) coupled to solid-phase extraction (SPE) and disposable low-density arrays

Progesterone and β-hCG Determination Using an Electrochemical Combo-Strip for Pregnancy Monitoring

The development of analytical devices that can allow an easy, rapid and cost-effective measurement of multiple markers, such as progesterone and β-hCG, could have a role in decreasing the burden associated with pregnancy-related complications, such as ectopic pregnancies. Indeed, ectopic pregnancies are a significant contributor to maternal morbidity and mortality in both high-income and low-income countries. In this work, an effective and highly performing electrochemical strip for a combo determination of progesterone and β-hCG was developed. Two immunosensing approaches were optimized for the determination of these two hormones on the same strip. The immunosensors were realized using cost-effective disposable electrode arrays and reagent-saving procedures. Each working electrode of the array was modified with both the IgG anti-β-hCG and anti-progesterone, respectively. By adding the specific reagents, progesterone or β-hCG can then be determined. Fast quantitative detection was achieved, with the analysis duration being around 1 h. Sensitivity and selectivity were assessed with a limit of detection of 1.5 × 10-2 ng/mL and 2.45 IU/L for progesterone and β-hCG, respectively. The proposed electrochemical combo-strip offers great promise for rapid, simple, cost-effective, and on-site analysis of these hormones and, thus, for the development of a point-of-care diagnostic tool for early detection of pregnancy-related complications.

Occurrence of persistent organic pollutants (POPs) in the atmosphere of South Korea: A review

Numerous studies found the presence of persistent organic pollutants (POPs) in various environmental compartments, including air, water, and soil. POPs have been discovered in various industrial and agricultural products with severe environmental and human health consequences. According to the data, South Korea is a hotspot for POP pollution in the southern part of Asia; hence, South Korea has implemented the Stockholm Convention's National Implementation Plan (NIP) to address this worldwide issue. The purpose of this review is to assess the distribution pattern of POPs pollution in South Korea's atmosphere. According to findings, PAHs, PCBs, BFRs, and PBDEs significantly polluted the atmosphere of South Korea; however, assessing their exposure nationwide is difficult due to a shortage of data. The POPs temporal trend and meta-analysis disclosed no proof of a decrease in PAHs and BFRs residues in the atmosphere. However, POP pollution in South Korea tends to decrease compared to contamination levels in neighboring countries like Japan and China.

Reliable and disposable quantum dot-based electrochemical immunosensor for aflatoxin B1 simplified analysis with automated magneto-controlled pretreatment system

An integrated aflatoxin B₁ (AFB₁) detection platform with quantum dot (QD)-based electrochemical immunosensor and an automated magneto-controlled pretreatment system was successfully developed. The automated pretreatment system adopts the immunoaffinity magnetic beads (IMB) as the capture probe of AFB₁ and QD-labeled AFB₁ complete antigen (AFB₁-BSA-QDs) as the signal probe. AFB₁-BSA-QDs can be easily converted into corresponding metallic cations through acidic treatment, which can be detected electrochemically via anode stripping voltammetry (ASV). Moreover, a disposable screen-printed electrode (SPE) without requiring any further modification is used in the novel electrochemical immunosensor' making routine testing feasible. Under optimal conditions, the detectable concentration range of AFB₁ was 0.08-800 μg/kg. The metal ion signal associated linearly with the logarithm of AFB₁ concentration within the range of 5-240 μg/kg, with a detection limit of 0.05 μg/kg. The spiked recoveries of three different concentrations in four different matrixes ranged from 83.9 to 118.0%, and inter-day relative standard deviations were below 10%. Furthermore, the methodology was validated by analyzing naturally contaminated samples, and results of the novel immunosensor were in good agreement with those of LC-MS/MS, demonstrating the potentiality of the developed method for the monitor of AFB₁ in cereals and oils.

Sustainable Printed Electrochemical Platforms for Greener Analytics

The development of miniaturized electrochemical platforms holds considerable importance for the in situ analytical monitoring of clinical, environmental, food, and forensic samples. However, it is crucial to pay attention to the sustainability of materials chosen to fabricate these devices, in order to decrease the amount and the impact of waste coming from their production and use. In the framework of a circular economy and an environmental footprint reduction, the electrochemical sensor production technology must discover the potentiality of innovative approaches based on techniques and materials that can satisfy the needs of environmental-friendly and greener analytics. The aim of this review is to describe some of the printing technologies most used for sensor production, including screen-printing, inkjet-printing, and 3D-printing, and the low-impact materials that are recently proposed for these techniques, such as polylactic acid, cellulose, silk proteins, biochar.

Label-free and highly selective electrochemical aptasensor for detection of PCBs based on nickel hexacyanoferrate nanoparticles/reduced graphene oxides hybrids

In consideration of the urgent need to determine polychlorinated biphenyls (PCBs) in the environment, a label-free and highly selective electrochemical aptasensor was constructed for determining PCBs based on nickel hexacyanoferrate nanoparticles (NiHCF NPs)/reduced graphene oxides (rGO) hybrids. NiHCF NPs/rGO hybrids with small size of about 5 nm NiHCF NPs were synthesized for the first time by in situ co-deposition of NiHCF NPs on rGO surface. In the hybrids, rGO with large area and good conductivity can supply more space for loading NiHCF NPs and improve the conductivity of the hybrids. NiHCF NPs that can be used to be act as a signal probe exhibit a couple of well-defined peaks with highly reversible redox ability and good stability. Here, PCB77 as a model molecule, the anti-PCB77 aptamer was anchored on the NiHCF NPs/rGO hybrids by covalent bonding reaction. The design aptasensor for detecting PCB77 exhibits a favorable linear response from 1.0 to 100.0 ng/L with a low detection limit of 0.22 ng/L. Meanwhile, it displays good selectivity for PCB77 detection due to the specificity and high affinity of aptamer to PCB77. Additionally, the application of the aptasensor was evaluated in real environmental samples.

Recent progress in the development of recognition bioelements for polychlorinated biphenyls detection: Antibodies and aptamers

Polychlorinated biphenyls (PCBs) are persistent pollutants, which have expanded in foods and the environment. Detection of PCBs is considered essential due to recognized side-effects of PCBs on health and the public concerns in this regard. On the other hand, due to the trace levels of these organic chlorine compounds, reliable and sensitive assays must be developed. Recognition elements are essential parts of analytical detection assays and sensors of PCBs since these elements are involved in the selective identification of the analytes of interest. Understanding the fundamentals of the recognition elements of PCBs and the benefits of the sensor strategies result in the development of next-generation recognition devices. This review aimed to highlight the recent progress in the recognition elements as key parts of biosensors. We initially, focused on the developed antibody-based biosensors for the detection of PCBs, followed by discussing the aptamers as novel recognition elements. Furthermore, the recent advancement in the development of aptamer-based solid phase extractions has been evaluated. These findings could contribute to improving the design of commercial PCB-kits in the future.

Trends and Perspectives in Immunosensors for Determination of Currently-Used Pesticides: The Case of Glyphosate, Organophosphates, and Neonicotinoids

Pesticides, due to their intensive use and their peculiar chemical features, can persist in the environment and enter the trophic chain, thus representing an environmental risk for the ecosystems and human health. Although there are several robust and reliable standard analytical techniques for their monitoring, the high frequency of contamination caused by pesticides requires methods for massive monitoring campaigns that are capable of rapidly detecting these compounds in many samples of different origin. Immunosensors represent a potential tool for simple, rapid, and sensitive monitoring of pesticides. Antibodies coupled to electrochemical or optical transducers have resulted in effective detection devices. In this review, the new trends in immunosensor development and the application of immunosensors for the detection of pesticides of environmental concern-such as glyphosate, organophosphates, and neonicotinoids-are described.

Upconversion Fluorescent Aptasensor for Polychlorinated Biphenyls Detection Based on Nicking Endonuclease and Hybridization Chain Reaction Dual-Amplification Strategy

A novel upconversion fluorescent aptasensor based on hybridization chain reaction and nicking endonuclease has been developed for detection of polychlorinated biphenyls (PCBs). It combined the dual advantages of UCNPs and HCR. Two harpins (H1 and H2) were first designed according to the partial complementary sequence (cDNA) of the PCB72/106. Since the aptamer specifically recognized the target, the cDNA was detached from the magnetic microspheres (MMPs). The cDNA could initiate hybridization chain reaction (HCR) and open the stems of H1 and H2. After the addition of nicking endonuclease, UCNPs were further away from the quenchers (BHQ-1). Hence, the fluorescence intensity of upconversion nanoparticals (UCNPs) could be restored via fluorescence resonance energy transfer (FRET). Therefore, the fluorescence of UCNPs was directly proportional to concentration of PCB72/106, which was the basis for the quantification of PCB72/106. PCB72/106 could be analyzed within the ranges of 0.004 to 800 ng/mL with a detection limit of 0.0035 ng/mL ( S/ N = 3). The aptasensor was also used for the detection of water and soil samples, and the average recoveries ranged from 93.4% to 109.7% and 83.2% to 118.5%, respectively. The relative standard deviations (RSDs) were all below 3.2%. The signal was first amplified through HCR and further amplified with the help of nicking endonuclease. This work also provided the opportunity to develop fluorescent aptasensors for other targets using this dual-amplification strategy.

DNA-Based Sensor for the Detection of an Organophosphorus Pesticide: Profenofos

In this work, we propose an electrochemical DNA aptasensor for the detection of profenofos, an organophosphorus pesticide, based on a competitive format and disposable graphite screen-printed electrodes (GSPEs). A thiol-tethered DNA capture probe, which results to be complementary to the chosen aptamer sequence, was immobilised on gold nanoparticles/polyaniline composite film-modified electrodes (AuNPs/PANI/GSPE). Different profenofos solutions containing a fixed amount of the biotinylated DNA aptamer were dropped onto the realized aptasensors. The hybridisation reaction was measured using a streptavidin-alkaline phosphatase enzyme conjugate, which catalyses the hydrolysis of 1-naphthyl -phosphate. The 1-naphtol enzymatic product was detected by means of differential pulse voltammetry (DPV). The aptasensor showed itself to work as a signal off sensor, according to the competitive format used. A dose response curve was obtained between 0.10 μM and 10 μM with a detection limit of 0.27 μM.

A highly sensitive and selective aptamer-based colorimetric sensor for the rapid detection of PCB 77

A highly sensitive, specific and simple colorimetric sensor based on aptamer was established for the detection of polychlorinated biphenyls (PCB 77). The use of unmodified gold nanoparticles as a colorimetric probe for aptamer sensors enabled the highly sensitive and selective detection of polychlorinated biphenyls (PCB 77). A linear range of 0.5nM to 900nM was obtained for the colorimetric assay with a minimum detection limit of 0.05nM. In addition, by the methods of circular dichroism, UV and naked eyes, we found that the 35 base fragments retained after cutting 5 bases from the 5 'end of aptamer plays the most significant role in the PCB 77 specific recognition process. We found a novel way to truncated nucleotides to optimize the detection of PCB 77, and the selected nucleotides also could achieve high affinity with PCB 77. At the same time, the efficient detection of the PCB 77 by our colorimetric sensor in the complex environmental water samples was realized, which shows a good application prospect.

Evaluation of a QuEChERS-like extraction approach for the determination of PBDEs in mussels by immuno-assay-based screening methods

A sample preparation method was evaluated for the determination of polybrominated diphenyl ethers (PBDEs) in mussel samples, by using colorimetric and electrochemical immunoassay-based screening methods. Herein, a rapid procedure based on QuEChERS-like extraction approach followed by solid phase purification was optimized for PBDE extraction from mussel samples. The detection limits for colorimetric and electrochemical immunoassays, calculated as BDE-47 equivalent concentration, were 0.6ngg^-1 and 1.1ngg^-1, respectively. Real mussel samples, including a Certified Reference Material (CRM), were analyzed. The samples were measured by colorimetric and electrochemical immunoassays as well as by GC-MS. In comparison to GC-MS results, 106% and 102% relative accuracy were obtained for the colorimetric and electrochemical immunoassays, respectively. The proposed method could be useful for massive environmental campaigns, being able to rapidly detect possible polluted seafood samples.

A review of polychlorinated biphenyls (PCBs) pollution in indoor air environment

Polychlorinated biphenyls (PCBs) were widely used in industrial production due to the unique physical and chemical properties. As a kind of persistent organic pollutants, the PCBs would lead to environment pollution and cause serious problems for human health. Thus, they have been banned since the 1980s due to the environment pollution in the past years. Indoor air is the most direct and important environment medium to human beings; thus, the PCBs pollution research in indoor air is important for the protection of human health. This paper introduces the industrial application and potential harm of PCBs, summarizes the sampling, extracting, and analytical methods of environment monitoring, and compares the indoor air levels of urban areas with those of industrial areas in different countries according to various reports. This paper can provide a basic summary for PCBs pollution control in the indoor air environment.

IMPLICATIONS

The review of PCBs pollution in indoor air in China is still limited. In this paper, we introduce the industrial application and potential harm of PCBs, summarize the sampling, extracting, and analytical methods of environment monitoring, and compare the indoor air levels of urban areas with industrial areas in different countries according to various reports.

Acetamiprid multidetection by disposable electrochemical DNA aptasensor

In this work, we propose an electrochemical DNA aptasensor for sensitive multidetection of acetamiprid based on a competitive format and disposable screen-printed arrays. To improve the sensitivity of the aptasensor, polyaniline film and gold nanoparticles were progressively electrodeposited on the graphite screen-printed electrode surface by cyclic voltammetry. Gold nanoparticles were then employed as platform for thiol-tethered DNA aptamer immobilization. Different acetamiprid solutions containing a fixed amount of biotinylated complementary oligonucleotide sequence by DNA aptasensor arrays were analyzed. Streptavidin-alkaline phosphatase conjugate was then added to trace the affinity reaction. The enzyme catalyzed the hydrolysis of 1-naphthyl phosphate to 1-naphthol. The enzymatic product was detected by differential pulse voltammetry. A decrease of the signal was obtained when the pesticide concentration was increased, making the sensor work as signal off sensor. Under optimized conditions by testing key experimental parameters, a dose-response curve was constructed between 0.25 and 2.0µM acetamiprid concentration range and a limit of detection of 0.086µM was calculated. The selectivity of the aptasensor was also confirmed by the analysis of atrazine pesticide. Finally, preliminary experiments in fruit juice samples spiked with acetamiprid were also performed.

An overview of detection techniques for monitoring dioxin-like compounds: latest technique trends and their applications

Dioxin-like compounds (DLCs) are considered as persistent bioaccumulative toxicants with a number of continuing issues in the fields of ecotoxicology and bioassay.

Aptamer-functionalized stir bar sorptive extraction coupled with gas chromatography-mass spectrometry for selective enrichment and determination of polychlorinated biphenyls in fish samples

In this paper, a novel aptamer-functionalized stir bar sorptive extraction (SBSE) was developed for selective enrichment of the low abundance polychlorinated biphenyls (PCBs) from fish samples. This approach was based on the immobilization of aptamer which could recognize 2,3',5,5'-tetrachlorobiphenyl (PCB72) and 2',3',4',5,5'-pentachlorobiphenyl (PCB106) on one kind of metal-organic frameworks (Zn4O(BDC)3, MOF-5). MOF-5 as a substrate was prepared by potential-controlled cathodic electrodeposition on stainless steel. This aptamer-functionalized stir bar sorptive extraction (Apt-MOF SBSE) fiber could be facile synthesized in one-step. PCB72 and PCB106 were employed as target analytes for selective extraction by the developed method. The adsorbed targets could be desorbed easily in pH 3.0 100mM glycine-HCl buffers and then extracted by the methylene chloride. Afterwards, the detection was carried out with gas chromatography-tandem mass spectrometry (GC-MS). The Apt-MOF SBSE pretreatment coupled with GC-MS exhibited high selectivity, good binding capacity, stability and reproducibility for the detection of PCBs. It provided a linear range of 0.02-250ngmL(-1) with a good coefficient of determination (R(2)=0.9991-0.9996) and the detection limit was 0.003-0.004ngmL(-1). More importantly, the method was successfully utilized for the determination of PCBs in fish samples with good enrichment factor (1930-2304). Therefore, this new SBSE coating opens up the possibility of selective enrichment of a given target PCBs from complex fish samples.

Electrochemical bioassay for the detection of TNF-α using magnetic beads and disposable screen-printed array of electrodes

BACKGROUND

In this study we have developed an electrochemical bioassay for the analysis of TNF-α, coupling magnetic beads with disposable electrochemical platforms. TNF-α is a pro inflammatory cytokine that participates in the regulation of immune defense against various pathogens and the recovery from injury. It plays a central role in the development of many inflammatory diseases. The bioassay was based on a sandwich format using alkaline phosphatase as an enzymatic label and an eight-sensor screen-printed array as an electrochemical transducer.

RESULTS

The modified magnetic beads were captured by a magnet on the surface of each graphite working electrode of the array and the electrochemical detection was thus achieved through the addition of the alkaline phosphatase substrate (1-naphthylphosphate); 1-naphthol produced during the enzymatic reaction was detected using differential pulse voltammetry. The parameters influencing the different steps of the assay were optimized in order to reach the best sensitivity and specificity.

CONCLUSION

The proposed strategy offers great promise for analysis of clinical diagnostics, considering also that arrays allow the simultaneous analysis of different samples.

Electrochemical detection of miRNA-222 by use of a magnetic bead-based bioassay

MicroRNAs (miRNAs, miRs) are naturally occurring small RNAs (approximately 22 nucleotides in length) that have critical functions in a variety of biological processes, including tumorigenesis. They are an important target for detection technology for future medical diagnostics. In this paper we report an electrochemical method for miRNA detection based on paramagnetic beads and enzyme amplification. In particular, miR 222 was chosen as model sequence, because of its involvement in brain, lung, and liver cancers. The proposed bioassay is based on biotinylated DNA capture probes immobilized on streptavidin-coated paramagnetic beads. Total RNA was extracted from the cell sample, enriched for small RNA, biotinylated, and then hybridized with the capture probe on the beads. The beads were then incubated with streptavidin-alkaline phosphatase and exposed to the appropriate enzymatic substrate. The product of the enzymatic reaction was electrochemically monitored. The assay was finally tested with a compact microfluidic device which enables multiplexed analysis of eight different samples with a detection limit of 7 pmol L(-1) and RSD = 15 %. RNA samples from non-small-cell lung cancer and glioblastoma cell lines were also analyzed.

The need and potential of biosensors to detect dioxins and dioxin-like polychlorinated biphenyls along the milk, eggs and meat food chain

Dioxins and dioxin-like polychlorinated biphenyls (DL-PCBs) are hazardous toxic, ubiquitous and persistent chemical compounds, which can enter the food chain and accumulate up to higher trophic levels. Their determination requires sophisticated methods, expensive facilities and instruments, well-trained personnel and expensive chemical reagents. Ideally, real-time monitoring using rapid detection methods should be applied to detect possible contamination along the food chain in order to prevent human exposure. Sensor technology may be promising in this respect. This review gives the state of the art for detecting possible contamination with dioxins and DL-PCBs along the food chain of animal-source foods. The main detection methods applied (i.e., high resolution gas-chromatography combined with high resolution mass-spectrometry (HRGC/HRMS) and the chemical activated luciferase gene expression method (CALUX bioassay)), each have their limitations. Biosensors for detecting dioxins and related compounds, although still under development, show potential to overcome these limitations. Immunosensors and biomimetic-based biosensors potentially offer increased selectivity and sensitivity for dioxin and DL-PCB detection, while whole cell-based biosensors present interpretable biological results. The main shortcoming of current biosensors, however, is their detection level: this may be insufficient as limits for dioxins and DL-PCBs for food and feedstuffs are in pg per gram level. In addition, these contaminants are normally present in fat, a difficult matrix for biosensor detection. Therefore, simple and efficient extraction and clean-up procedures are required which may enable biosensors to detect dioxins and DL-PCBs contamination along the food chain.

Strategies for electrochemical detection in immunochemistry

In this review, the current status of research in electrochemical immunosensors is considered. We primarily focus on label-free and enzyme-labeled immunosensors, and the analytical capabilities of these devices are discussed. Moreover, the use of magnetic beads as new materials for immunosensors coupled with electrochemical sensing is also described, together with the application of new molecules such as aptamers as specific biorecognition elements. Examples of the applicability of these devices in solving various analytical problems in clinical, environmental and food fields are reported. Finally, the prospects for the further development of immunosensor technologies are shown.

Enzyme-amplified electrochemical hybridization assay based on PNA, LNA and DNA probe-modified micro-magnetic beads

In the present study, we investigated the properties of PNA and LNA capture probes in the development of an electrochemical hybridization assay. Streptavidin-coated paramagnetic micro-beads were used as a solid phase to immobilize biotinylated DNA, PNA and LNA capture probes, respectively. The target sequence was then recognized via hybridization with the capture probe. After labeling the biotinylated hybrid with a streptavidin-enzyme conjugate, the electrochemical detection of the enzymatic product was performed onto the surface of a disposable electrode. The assay was applied to the analytical detection of biotinylated DNA as well as RNA sequences. Detection limits, calculated considering the slope of the linear portion of the calibration curve in the range 0-2 nM were found to be 152, 118 and 91 pM, coupled with a reproducibility of the analysis equal to 5, 9 and 6%, calculated as RSD%, for DNA, PNA and LNA probes respectively, using the DNA target. In the case of the RNA target, the detection limits were found to be 51, 60 and 78 pM for DNA, PNA and LNA probes respectively.

Electrochemical biosensor technology: application to pesticide detection

In recent years, electrochemical sensors and biosensors are becoming an accepted part of analytical chemistry since they satisfy the expanding need for rapid and reliable measurements. An area in which electrochemical biosensors perhaps show the greatest diversity and potential for development involves the measurement of environmentally significant parameters. The increasing number of pollutants in the environment calls for fast and cost-effective analytical requirements. In this context, biosensors appear as suitable alternative or complementary analytical tools. The aim of this chapter is to review some basic concept concerning the electrochemical biosensors and to illustrate a protocol for the detection of environmental organic pollutants on the basis of electrochemical biosensors. In particular, a method based on the inhibition of the enzyme acetylcholinesterase (AChE) for the detection of organophosphorus and carbamate pesticides will be described in detail.

Different approaches for the detection of thrombin by an electrochemical aptamer-based assay coupled to magnetic beads

Different assay formats based on the coupling of magnetic beads with electrochemical transduction were compared here for the detection of thrombin by using a thrombin specific aptamer. By using the thrombin-binding aptamer, a direct and an indirect competitive assay for thrombin have been developed by immobilising the aptamer or the protein, respectively. Moreover, another strategy was based on the direct measurement of the enzymatic product of thrombin captured by the immobilised aptamer. All the assays were developed by coupling the electrochemical transduction with the innovative and advantageous use of magnetic beads. The assays based on the immobilisation of the protein were not successful since no binding was recorded between thrombin and its aptamer. With the direct competitive assay, when the aptamer was immobilised onto the magnetic beads, a detection limit of 430nM for thrombin was achieved. A lower detection limit for the protein (175nM) was instead obtained by detecting the product of the enzymatic reaction catalysed by thrombin. All these assays were finally compared with a sandwich assay which reached a detection limit of 0.45nM of thrombin demonstrating the best analytical performances. With this comparison the importance of a deep study on the different analytical approaches for thrombin detection to reach the performances of the best assay configuration has been demonstrated.