A colorimetric assay for measuring iodide using Au@Ag core–shell nanoparticles coupled with Cu2+

Methyl orange as a novel colorimetric iodide indicator with in situ generation of H2O2 by etching uncoated Ag-Ti3C2 nanohybrids

Iodine intake remains a major public health concern, as both iodine excess and deficiency are related to adverse effects on health. Therefore, developing simple and economical methods to detect I^- is still in great demand. Herein, we constructed a visual I^- sensing platform based on the uncoated Ag-Ti₃C₂ nanohybrids using methyl orange (MO) as a colorimetric indicator. Plasmonic nanostructures are frequently employed in colorimetric analysis, but uncoated Ag nanoparticles (NPs) are unstable because their surface energies are usually high. Considering that Ag NPs can be etched by I^- via forming Ag-I bond, we introduce Ag-Ti₃C₂ nanohybrids because uncoated Ag NPs with immaculate surfaces are more conducive to binding with I^- and being etched. Dissolved O₂ molecules adsorbed on Ti³⁺ of Ti₃C₂ MXenes enable the in situ generation of H₂O₂ by iodine-etching of uncoated Ag-Ti₃C₂ nanohybrids. ∙OH radicals promote the degradation of MO through a self-driven Fenton-like process, exhibiting the color variation from orange to transparent. Under optimal conditions, the absorbance of MO at 465 nm decreases linearly with the concentration of I^- in the range of 0.5-300 μM, with a limit of detection as low as 0.31 μM. This work opens the feasibility of iodine-etching of Ag in developing novel probes for facile colorimetric determination of I^-.

Colorimetric and visual determination of iodide ions via morphology transition of gold nanobipyramids

The gold nanobipyramids (Au NBPs) are widely used in the analytical detection of biochemistry due to their unique localized surface plasmon resonance (LSPR) properties. In our developed approach, I^- in kelp was detected by etching Au NBPs in the presence of IO₃^-. Under acidic conditions, IO₃^- reacted rapidly with I^- to form I₂, subsequently I₂ reacted with I^- to form the intermediate I₃^-. In the presence of CTAB, Au NBPs were etched by I₂ derived from I₃^-, resulting in a decrease in the aspect ratio of Au NBPs, to form a significant blue shift of LSPR longitudinal peak and color variation of colloid which changed from blue-green to magenta and could be employed to quantitatively detect the concentration of I^- with the naked eye. A linear relationship can be found between the LSPR peak changes with the I^- concentration in a wide range from 4.0 μM to 15.0 μM, and the sensitive limit of detection (LOD) was 0.2 μM for UV-vis spectroscopy and the obvious color changes with a visual LOD was 4.0 μM for the naked eye. Benefiting from the high specificity, the proposed colorimetric detection of I^- in kelp samples was achieved, indicating the available potential of the colorimetric detection for the determination of I^- in real samples. What's more, this detection procedure was time-saving and could avoid tedious procedures.

Plasmonic surface-enhanced Raman scattering nano-substrates for detection of anionic environmental contaminants: Current progress and future perspectives

Surface-enhanced Raman scattering spectroscopy (SERS) is a powerful technique of vibrational spectroscopy based on the inelastic scattering of incident photons by molecular species. It has unique properties such as ultra-sensitivity, selectivity, non-destructivity, speed, and fingerprinting properties for analytical and sensing applications. This enables SERS to be widely used in real-world sample analysis and basic plasmonic mechanistic studies. However, the desirable properties of SERS are compromised by the high cost and low reproducibility of the signals. The development of multifunctional, stable and reusable nano-engineered SERS substrates is a viable solution to circumvent these drawbacks. Recently, plasmonic SERS active nano-substrates with various morphologies have attracted the attention of researchers due to promising properties such as the formation of dense hot spots, additional stability, tunable and controlled morphology, and surface functionalization. This comprehensive review focused on the current advances in the field of SERS active nanosubstrates suitable for the detection and quantification of anionic environmental pollutants. The common fabrication methods, including the techniques for morphological adjustments and surface modification, substrate categories, and the design of nanotechnologically fabricated plasmonic SERS substrates for anion detection are systematically presented. Here, the need for the design, synthesis, and functionalization of SERS nano-substrates for anions of great environmental importance is explained in detail. In addition, the broad categories of SERS nano-substrates, namely colloid-based SERS substrates and solid-support SERS substrates are discussed. Moreover, a brief discussion of SERS detection of certain anionic pollutants in the environment is presented. Finally, the prospects in the fabrication and commercialization of pilot-scale handheld SERS sensors and the construction of smart nanosubstrates integrated with novel amplifying materials for the detection of anions of environmental and health concern are proposed.

Multifunctional Au@Pt@Ag NPs with color-photothermal-Raman properties for multimodal lateral flow immunoassay

Multimodal lateral flow immunoassay (LFIA) has displayed its potential to improve practicability and elasticity of point-of-care testing. Herein, multifunctional core-shell-shell Au@Pt@Ag NPs loaded with dual-layer Raman reporter molecules of 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) with a characteristic combination of color-photothermal-Raman performance were constructed for colorimetric LFIA (CM-LFIA), photothermal LFIA (PT-LFIA) and surface-enhanced Raman scattering-based LFIA (SERS-LFIA), respectively. The highly specific nanoprobes, being obtained through the combination of the resulted dual-layer DTNB modified Au@Pt@Ag NPs with the antibody, were triumphantly utilized in exploring multimodal LFIA with one visual qualitative and two optional quantitative modes with excellent sensing sensitivity. Under optimal conditions, the limit of detection (LOD) for the model hazardous analyte dehydroepiandrosterone (DHEA) were 1.0 ng mL^-1 for CM-LFIA, 0.42 ng mL^-1 for PT-LFIA, and 0.013 ng mL^-1 for SERS-LFIA, three of which were over 100-fold, 200-fold and 7 000-fold more sensitive than conventional visual AuNPs-based LFIA, respectively. In addition, the quantitative PT-LFIA and SERS-LFIA sensors worked well in spiked real samples with acceptable recoveries of 96.2 - 106.7% and 98.2 - 105.2%, respectively. This assay demonstrated that the developed multimodal LFIA had a great potential to be a powerful tool for accurate tracing hazardous analytes in complex samples.

Waterproof Cellulose-Based Substrates for In-Drop Plasmonic Colorimetric Sensing of Volatiles: Application to Acid-Labile Sulfide Determination in Waters

The present work reports on the assessment of widely available waterproof cellulose-based substrates for the development of sensitive in-drop plasmonic sensing approaches. The applicability of three inexpensive substrates, namely, Whatman 1PS, polyethylene-coated filter paper, and tracing paper, as holders for microvolumes of colloidal solutions was evaluated. Waterproof cellulose-based substrates demonstrated to be highly convenient platforms for analytical purposes, as they enabled in situ generation of volatiles and syringeless drop exposure unlike conventional single-drop microextraction approaches and can behave as sample compartments for smartphone-based colorimetric sensing in an integrated way. Remarkably, large drop volumes (≥20 μL) of colloidal solutions can be employed for enrichment processes when using Whatman 1PS as holder. In addition, the stability and potential applicability of spherical, rod-shaped, and core-shell metallic NPs onto waterproof cellulose-based substrates was evaluated. In particular, Au@AgNPs showed potential for the colorimetric detection of in situ generated H2S, I2, and Br2, whereas AuNRs hold promise for I2, Br2, and Hg0 colorimetric sensing. As a proof of concept, a smartphone-based colorimetric assay for determination of acid-labile sulfide in environmental water samples was developed with the proposed approach taking advantage of the ability of Au@AgNPs for H2S sensing. The assay showed a limit of detection of 0.46 μM and a repeatability of 4.4% (N = 8), yielding satisfactory recoveries (91-107%) when applied to the analysis of environmental waters.

Specific sensing of resorcin based on the hierarchical porous nanoprobes constructed by cuttlefish-derived biomaterials through differential pulse voltammetry

The specific detection of resorcin from its isomers is a current research hotspot. Thus in our work, a ternary hierarchical porous nanoprobe has been constructed based on the combination of cuttlefish ink and bimetallic Au@Ag nanoclusters for the specific sensing of resorcin. Briefly, through electrostatic interaction, Au@Ag core-shell nanoclusters are immobilized on the surface of polydopamine extracted from cuttlefish, which is turned into nitrogen-doped porous carbon functionalized by bimetallic Au@Ag by topological transformation subsequently. Afterward, an electrochemical sensor is fabricated based on the nanoprobes for specifically determining resorcin in solution by differential pulse voltammetry, and the linear detection ranges of the sensor are 1-100 μM and 1.2-4 mM while the detection limit reaches 0.06 μM. Meanwhile, the sensing mechanism of resorcin by the pre-fabricated sensor is detailedly studied by density functional theory to obtain a clear electrochemical process. Besides, the selectivity, stability, plus reproducibility of the pre-fabricated sensor have been also tested, and the determinations for resorcin in real environmental water samples have also been performed with good recoveries, revealing the auspicious application potential in the environmental monitoring.

Distance-Based Paper Device for a Naked-Eye Albumin-to-Alkaline Phosphatase Ratio Assay

The albumin-to-alkaline phosphatase ratio (AAPR) has been a cancer prognostic indicator. This paper presents the concept of a dual-color change distance-based paper device (dPAD) for albumin (Alb) and alkaline phosphatase (ALP) detection to evaluate this cancer prognostic index. Whereas Alb interacts with the bromocresol green (BCG) indicator to form a bluish-green complex, ALP hydrolyzes l-ascorbic acid-2-phosphate (AAP) to produce ascorbic acid (AA), which reacts with KIO₃ to generate I₂ and I^-. I₂/I^- reacts with silver hexagonal nanoprisms (purple color) in the presence of Cu²⁺, resulting in a color change from purple to colorless. The distance of the color change from yellow to the bluish-green and purple to colorless correlates to Alb and ALP concentration, respectively. The angle index for the AAPR is then defined by drawing a straight line that connects the tops of the two changed band lengths in the detection area. The highest bluish-green color band length on the Alb region is the midpoint, which is the position set of the protractor at 0°, and the angle is measured using a simple protractor. The results indicate that an AAPR below 0.57 will have an angle greater than 40° and correlates with a risk factor for lung cancer. The naked-eye detection limits for Alb and ALP were found to be 0.8 g/L and 5 U/L (n = 10), respectively. The practical application of the developed dPAD was successfully demonstrated by Alb and ALP analysis in human serum and validated against standard methods. The proposed method does not require incubation conditions for the ALP assay, which strongly reduces the overall analysis steps and time. Moreover, our device provides a low-cost, simple, sensitive, selective, accurate, and precise determination of the AAPR.

Convenient detection of H2S based on the photothermal effect of Au@Ag nanocubes using a handheld thermometer as readout

Hydrogen sulfide (H₂S), as a hazardous gas, is often found around dump areas. Long term exposure can cause harm to health, it is highly necessary to develop some simple and sensitive methods for on-site H₂S detection. Herein, a convenient photothermal assay has been designed for the quantitation of H₂S using a handheld thermometer as readout. Au@Ag nanocubes (Au@Ag NCs), a core-shell nanocomposite with strong light absorption at ∼450 nm, was chosen as a novel photothermal agent in this study. Under the laser irradiation at 450 nm, the Au@Ag NCs show a strong photothermal effect, and a significant temperature enhancement can be measured by the thermometer easily. The presence of H₂S can lead to the deposition of sulfur onto Au@Ag NCs, altering the localized surface plasmon resonance absorption, size, surface composition, and morphology of Au@Ag NCs and hence leading to the reduction of photothermal effect. The change of the temperature has a linear relationship with the H₂S concentration in the range of 0.5-80.0 μM with a detection limit of 0.35 μM. By combining with simple sample purification procedures, the developed method has been applied to detect H₂S in garbage odor gas with satisfactory results.

Sequential colorimetric sensing of cupric and mercuric ions by regulating the etching process of triangular gold nanoplates

A triangular gold nanoplate (AuNPL)-based colorimetric assay is presented for ultrasensitive determination of cupric ions (Cu²⁺⁾ and mercuric ions (Hg²⁺) in sequence. AuNPLs were found to be etched efficiently when producing triiodide ions (I₃^-) by a redox reaction between Cu²⁺ and iodide ions (I^-), leading to a change of the shape of AuNPLs from triangular to sphere along with a color change from blue to pink. In the presence of Hg²⁺ the etching of AuNPLs was suppressed due to the consumption of I^- by the formation of HgI₂. With an increase of the concentration of the Hg²⁺ a transformation from sphere to triangular in the shape of AuNPLs occurred with a color change from pink to blue. The evolution of AuNPLs from etching to anti-etching state by sequential addition of Cu²⁺ and Hg²⁺ was accompanied with color variations and band shifts of localized surface plasmon resonance (LSPR), allowing for visual and spectroscopic determination of Cu²⁺ and Hg²⁺ successively within 15 min. In the range 0.01-1.5 μM for Cu²⁺ and 0.02-3.0 μM for Hg²⁺, the linear relationship between the band shift values and the target ions concentration was found good (R² > 0.996). The limit of detections (3S/k) was 19 nM for Cu²⁺ and 9 nM for Hg²⁺, respectively. The lowest visual estimation concentration was 80 nM for both Cu²⁺ and Hg²⁺ through the distinguishable color changes. This system exhibited desirable selectivity for Cu²⁺ and Hg²⁺ over other common ions tested. The method has been successfully applied to sequential determination of Cu²⁺ and Hg²⁺ in real water and food samples. Graphical abstract Scheme 1 Schematic illustration for sequential detection of Cu²⁺ and Hg²⁺ based on etching of AuNPLs.

Synthesis and characterization of luminescent SiO2 @Eu(phen-Si) core-shell nanospheres

Four core-shell structured nanometre luminescent composites with different kernel sizes and different shell layer thicknesses (SiO₂₍₅₀₀₎ @Eu (phen-Si)₍₅₀₎ , SiO₂₍₅₀₀₎ @Eu (phen-Si)₍₁₅₎ , SiO₂₍₂₅₀₎ @Eu (phen-Si)₍₅₎ and SiO₂₍₂₅₀₎ @Eu (phen-Si)₍₁₀₎ ) were made by changing synthesis conditions. Here, initial subscript numbers in parentheses refer to the particle size of the SiO₂ core, whereas the final subscript numbers in parentheses refer to shell layer thickness. In these composites, silica spheres of 500 nm or 250 nm were identified as the core. The shell layer was composited of silicon, 1,10-phenanthroline and europium perchlorate, abbreviated as Eu(phen-Si); the chemical formula of phen-Si was phen-N-(CONH (CH₂ )Si(OCH₂ CH₃ )₃ )₂ . The composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and infrared spectroscopy. The monodispersed spherical SiO₂ showed characteristics of a regular microstructure and a smooth surface, as well as the advantage of dispersity, shown by SEM. The Eu(phen-Si) complex was able to self-assemble into monodispersed SiO₂ spheres, as seen using TEM. Fluorescence spectra indicated that the four composites had excellent luminescence properties. Furthermore, composites composed of a SiO₂ core and a 250 nm kernel size exhibited stronger fluorescence than 500 nm kernel-sized composites. Fluorescence properties were affected by shell thickness: the thicker the shell, the greater the fluorescence intensity. For the four composites, quantum yield values and fluorescence lifetime corresponded to fluorescence emission intensity data as quantum yield values and fluorescence lifetime were higher, and luminescence properties increased.

Highly Selective Detection of Iodide in Biological, Food, and Environmental Samples Using Polymer-Capped Silver Nanoparticles: Preparation of a Paper-Based Testing Kit for On-Site Monitoring

This work describes a facile synthesis of polymer-capped silver nanoparticles at room temperature. Chitosan oligosaccharide lactate-capped silver nanoparticles (COL-AgNPs) show the surface plasma resonance (SPR) band at 400 nm. The color of the COL-AgNPs was observed to be brownish yellow. The synthesized COL-AgNPs are stable for 5 months. The COL-AgNPs were characterized by UV-vis, X-ray diffraction, high-resolution transmission electron microscopy (HR-TEM), mass, and Fourier transform infrared spectral techniques. The obtained COL-AgNPs are monodispersed, and the range of the particle diameter was calculated to be 16.37 ± 0.15 nm by HR-TEM. We have utilized the COL-AgNPs as a probe to sense iodide (I^-). The SPR band of COL-AgNPs was decreased after the addition of iodide, and the color of the solution changed to colorless. Based on the decreases in SPR band absorbance, the concentration of iodide was calculated. The detection limit was found to be 108.5 × 10^-9 M (S/N = 3). Other interferences (825- and 405-fold) did not interfere with the detection of 1.48 × 10^-6 M iodide. The sensing mechanism was also discussed. Finally, we have successfully applied our sensing system for the detection of iodide in tap water, river water, pond water, blood serum, urine, and food samples. Good recoveries are obtained with spiked iodide in the real samples. Importantly, we have developed a paper-based kit using wax-printed paper for the on-site monitoring of iodide. The developed paper-based kit absorbance was validated with the microplate reader. To the best of our knowledge, this is the first report that used six different real samples for the detection of iodide and development of the paper-based kit for on-site monitoring.

Size-tunable Au@Ag nanoparticles for colorimetric and SERS dual-mode sensing of palmatine in traditional Chinese medicine

Palmatine is a protoberberine alkaloid separated from several plants and application as an anti-inflammatory and antibacterial agent in the therapy of gastrointestinal and genitourinary disorder. Thus, the fast quantification of palmatine is important in clinic medical assays. Herein, we report simple, fast and sensitive colorimetric visualization and surface-enhanced Raman spectroscopy (SERS) dual-mode detection of palmatine basing on bimetallic size tunable silver shell capped gold nanoparticles (Au@Ag NPs). Interesting, the best signals output for dual-mode sensing of palmatine were both 5 nm Ag shell thickness of Au@Ag NPs. Meanwhile, we found that the addition of NaHSO₄ significantly improves the aggregating sensitivity of Au@Ag NPs to trace palmatine. Upon exposure to 0.1 μM level palmatine, NaHSO₄-optimized Au@Ag NPs solution exhibits a highly sensitive color change from orange to green and rapid aggregation kinetics within the initial 5 min, which can directly be seen with the naked eye and monitored by UV-vis absorbance spectra. In addition, we measured palmatine by SERS with the excellent enhancement effect of Au@Ag NPs for further increase the sensitivity and selectivity. More importantly, other protoberberine alkaloids do not interfere with this dual-mode sensor due to the different interaction force between Au@Ag NPs and these alkaloids, and the applicability of the sensor is well demonstrated in real samples with satisfactory results. This provide a fast and simple assay for the rapid detection of palmatine in traditional Chinese medicine, the limit of detection (LOD) is 0.13 μM by the naked eye and 0.10 μM by UV-vis spectroscopy. Therefore, the size-tunable of NaHSO₄-optimized Au@Ag NPs can be used not only as a naked-eye sensor of palmatine, but also as a highly selective SERS probe.

Facile method for iodide ion detection via the fluorescence decrease of dihydrolipoic acid/beta-cyclodextrin protected Ag nanoclusters

In this work, novel photoluminescent Ag nanoclusters (Ag NCs) with red emission are synthesized and successfully used for detecting iodide ion (I^-). The dihydrolipoic acid (DHLA) is used as the stabilizing agent and beta-cyclodextrin (β-CD) is used as the auxiliary stabilizing agent. DHLA and β-CD are combined with Ag atoms by the formation of AgS bonds and hydrophobic interaction, respectively. Functionalization of β-CD endows good photoluminescent properties and solubility in water to the Ag NCs. The obtained DHLA and β-CD-protected Ag NCs (DHLA/β-CD-Ag NCs) are spherical and display a dispersed state. However, the DHLA/β-CD-Ag NCs are aggregated in the presence of I^-, accompanied by the decrease in their fluorescence intensity. Because the integrity of β-CD cavities is retained on the surface of DHLA/β-CD-Ag NCs, which preserves their capability for I^- host-guest recognition, the DHLA/β-CD-Ag NCs combine with I^- through the formation of inclusion complexes. Based on this phenomenon, the prepared DHLA/β-CD-Ag NCs can be designed as a novel fluorescent probe for I^- detection. The limit of detection (LOD) is calculated as 0.06 μM, indicating that it is an ideal probe for I^- detection in practical applications.

Colorimetric paper sensor for sensitive detection of explosive nitroaromatics based on Au@Ag nanoparticles

Rapid, reliable, onsite approaches for detection trace level of trinitrotoluene (TNT) is a pressing necessity for both homeland security and environmental protection. To this end, hydrophilic amine(-NH₂) protected Au@Ag nanoparticles (NPs) were developed and fabricated as colorimetric paper sensor for delicate detection of TNT. The as-developed nanoprobe selectively reacts with TNT through classic Meisenheimer complex formation by means of charge transfer process from an electron-rich NH₂ group of β-cysteamine to an electron-deficient nitro group on TNT. Due to the absence of this particular interaction of other nitroaromatics, the proposed probe is highly selective for TNT detection with a better linear range (0-20 μg/mL) and limit of detection (LOD) of 0.35 μg/mL. The present work provides a novel and facile strategy to fabricate colorimetric paper sensors with rapid and selective recognition ability for label free analysis of TNT.

Synthesis of Bimetallic Gold-Silver (Au-Ag) Nanoparticles for the Catalytic Reduction of 4-Nitrophenol to 4-Aminophenol

Bimetallic gold-silver nanoparticles as unique catalysts were prepared using seed colloidal techniques. The catalytic capabilities of the nanoparticles were ascertained in the reduction of 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride. Our results clearly showed that the rate of 4-NP reduction to 4-AP increased with a corresponding decrease in the diameter of the bimetallic NPs. The Au-Ag nanoparticles prepared with 5.0 mL Au seed volume indicated higher reduction activity, which was approximately 1.2 times higher than that of 2.0 mL Au seed volume in the reductive conversion of 4-NP to 4-AP. However, the monometallic NPs showed relatively less catalytic activity in the reductive conversion of 4-NP to 4-AP compared to bimetallic Au-Ag nanoparticles. Our studies also reinforced the improved catalytic properties of the bimetallic Au-Ag nanoparticles structure with a direct impact of the size or diameter and relative composition of the bimetallic catalytic nanoparticles.

Optical assays based on colloidal inorganic nanoparticles

Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays. A large number of these assays rely on the ability of gold nanoparticles (AuNPs, in the 20 nm diameter size range) to undergo a color change from red to blue upon aggregation. AuNP assays can be based on cross-linking, non-cross linking or unmodified charge-based aggregation. Nucleic acid-based probes, monoclonal antibodies, and molecular-affinity agents can be attached by covalent or non-covalent means. Surface plasmon resonance and SERS techniques can be utilized. Silver NPs also have attractive optical properties (higher extinction coefficient). Combinations of AuNPs and AgNPs in nanocomposites can have additional advantages. Magnetic NPs and ZnO, TiO2 and ZnS as well as insulator NPs including SiO2 can be employed in colorimetric assays, and some can act as peroxidase mimics in catalytic applications. This review covers the synthesis and stabilization of inorganic NPs and their diverse applications in colorimetric and optical assays for analytes related to environmental contamination (metal ions and pesticides), and for early diagnosis and monitoring of diseases, using medically important biomarkers.

The use of S2O82− and H2O2 as novel specific masking agents for highly selective “turn-on” fluorescent switching recognition of CN− and I− based on Hg2+–graphene quantum dots

In this study, we report that both CN⁻ and I⁻ can enhance the fluorescent intensity of Hg²⁺–graphene quantum dots (Hg²⁺–GQDs). However, the selectivity of the sensor was poor. Accordingly, simple specific masking agents can be directly used to solve this problem. Here, for the first time, we report the use of persulfate ion (S₂O₈²⁻) as a turn-on fluorescent probe of Hg²⁺–GQDs for selective CN⁻ detection, while hydrogen peroxide (H₂O₂) was selected for its sensing ability towards I⁻ ion detection. Interestingly, the signal was immediately measured after addition of the masking agent to Hg²⁺–GQDs and the sample because its interaction was very fast and efficient. The method had a linear response in the concentration ranges of 0.5–8 μM (R² = 0.9994) and 1–12 μM (R² = 0.9998) with detection limits of 0.17 and 0.20 μM for CN⁻ and I⁻, respectively. The sensor was successfully used for the dual detection of both CN⁻ and I⁻ in real water samples with satisfactory results. In conclusion, the specific masking agents in a Hg²⁺–GQDs system appeared to be good candidates for fluorometric “turn-on” sensors for CN⁻ and I⁻ with excellent selectivity over other ions.

In this study, we report that both CN⁻ and I⁻ can enhance the fluorescent intensity of Hg²⁺–graphene quantum dots (Hg²⁺–GQDs).

Fluorescent sensing of ascorbic acid based on iodine induced oxidative etching and aggregation of lysozyme-templated silver nanoclusters

In this work, we developed a sensitive and highly selective fluorescent approach for the detection of ascorbic acid (AA) by taking advantage of the oxidative etching effect of iodine (I₂) on the lysozyme-stabilized silver nanoclusters (dLys-AgNCs) with fluorescence quenching. I₂ could be produced from the redox reaction between iodate (IO₃^-) and AA, and thus the fluorescence intensity of dLys-AgNCs was turned off significantly in the coexistence of IO₃^- and AA. The fluorescence quenching of dLys-AgNCs had a good linear relationship with AA concentration, which allowed the detection of AA in the range from 0.05 to 45.0 μmol L^-1 with a detection limit of 20 nmol L^-1. The quenching mechanism was elucidated by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), zeta potential, and dynamic light scattering (DLS) measurements, confirming that the fluorescence quenching of the dLys-AgNCs was attributed to the oxidative etching of the in situ generated I₂, inducing aggregation of the dLys-AgNCs probe by forming Ag@AgI nanocomposite. The dLys-AgNCs probe exhibited excellent selectivity for AA sensing over several common reducing agents tested. Moreover, this approach was extended to the detection of AA in orange juice and urine with recovery rates in the range of 96.0% (RSD: 4.11) to 100.9% (RSD: 3.28) and 94.5% (RSD: 6.40) to 99.2% (RSD: 5.36), respectively.

Lysozyme-stabilized Ag nanoclusters: synthesis of different compositions and fluorescent responses to sulfide ions with distinct modes

The effect of composition on the photoluminescence properties of lysozyme-stabilized Ag nanoclusters and their sensing modes for sulfide anions were studied.