Magnetic solid-phase extraction using carbon nanotubes as sorbents: A review

Recent advances in synthesis and applications of hyper-crosslinked porous organic polymers for sample pretreatment: A review

Hyper-crosslinked porous organic polymers (HCPs) are nanoporous materials synthesized through Friedel-Crafts reactions, which covalently crosslink monomeric units to integrate the high porosity, large surface area, and tunable pore architecture of porous networks with the structural diversity, lightweight nature, and compositional flexibility inherent to polymeric systems. These materials exhibit excellent thermal/chemical stability, facile surface functionalization, and scalable synthesis protocols, enabling versatile applications in drug delivery, chromatography, catalysis, and gas storage. In recent years, HCPs have gained prominence as advanced sorbents in sample pretreatment, owing to their inherent physicochemical characteristics that align closely with the critical requirements for high-performance extraction or purification adsorbents. This review aims to present recent advancements in HCPs preparation, with a primary focus on their applications in analytical sample preparation. A systematic investigation of HCP-based adsorption mechanisms, structural design principles, and fabrication methodologies was conducted to establish robust structure-function correlations through performance evaluation across diverse extraction techniques, including column solid-phase extraction (SPE), magnetic SPE (MSPE), solid-phase microextraction (SPME), and other miniaturized SPE formats, for the pre-concentration of target analytes in food, environmental, and biological samples. Finally, we delineate current challenges and future research directions, proposing innovative engineering strategies to advance HCPs for addressing complex analytical matrix challenges.

A magnetic poly (methacrylic acid-co-ethylene glycol dimethacrylate) copolymer for extraction of anticonvulsants from saliva followed by high performance liquid chromatography analysis

Neurological diseases like epilepsy are commonly treated with anticonvulsants, and the dosage control of these medications has been carried out with therapeutic biomonitoring, mainly in blood. Saliva is a less invasive sample, and its drug concentration is proportional to the blood fraction concentration not bound to the proteins, making it an important alternative to blood. Therefore, this study describes the synthesis of a magnetic poly (methacrylic acid-co-ethylene glycol dimethacrylate) copolymer (M-CP) and its use in magnetic dispersive solid phase extraction of primidone (PMR), phenobarbital (PB), phenytoin (PHT), and carbamazepine (CB) from saliva, followed by their determination by high performance liquid-chromatography. M-CP was synthesized in 4 steps and the material was characterized by infrared spectroscopy, scanning electron microscopy, zeta potential, and thermal analysis. The sample preparation protocol was optimized by central composite rotatable design and the optimal conditions were obtained for pH 5.78, 12.8 mg of M-CP, and 2.18 mL of diluted saliva. In the adsorption studies, the Avrami and Jovanovic models demonstrated the best fit for describing the adsorption kinetics and isotherm, respectively. The equilibrium time was reached in 60 min, and 10.96 mg g-1 was the maximum adsorption capacity. The developed method was linear (R2 > 0.99) in the range of 2 to 30 mg L-1 for PMR and PB, 1 to 20 mg L-1 for PHT, and 1 to 30 mg L-1 for CBZ. Precisions were obtained in the range of 1.35 to 19.44 %, and accuracy from -14.92 % to 18.83 %. The limits of detection ranged from 0.48 to 1.30 mg L-1, while the limits of quantification were lower than the therapeutic levels of each drug, being suitable for the method application. The developed method is simple, fast, and requires few amounts of saliva, sorbent, and solvents, being a good alternative for the therapeutic biomonitoring of anticonvulsants in saliva samples.

Nanomaterial-based magnetic solid-phase extraction in pharmaceutical and biomedical analysis

Magnetic solid-phase extraction (MSPE) holds significant scientific and technological interest as a novel sample preparation method for complex samples due to its easy operation, swift separation, high adsorption efficiency, and environmental friendliness. As the core of MSPE, magnetic sorbents have captured tremendous attention in recent years. Various promising nanomaterials, such as metal-organic frameworks and covalent organic frameworks, have been synthesized and utilized as sorbents in pharmaceutical and biomedical analysis. This review intends to (1) summarize recent progress of magnetic sorbents applied in this area and discuss their advantages, disadvantages, possible interaction mechanisms with the target substances; (2) explore their innovative applications in the analysis of pharmaceuticals, proteins, peptides, nucleic acids, nucleosides, metabolites, and other disease biomarkers from 2021 to 2024; (3) present the integration of MSPE with emerging analytical technologies; and (4) discuss the current challenges and future perspectives. It is expected to provide references and insights for the development of novel magnetic sorbents and their applications in bioanalysis.

A Review on the Applications of Quantum Dots in Sample Preparation

In recent years, despite significant advances in preconcentration and preparation techniques that have led to efficient recovery and accurate measurement of target compounds. There is still a need to develop adsorbents with unique and efficient features such as high pore volume and surface area, reactivity, easy synthesis, low toxicity, and compatibility with the environment, which increase the adsorption capacity and increase extraction efficiency. Semiconductor nanocrystals called quantum dots (QDs) with a size of less than 10 nm are three-dimensional nanoparticles with a spherical, rod, or disc structure that have significant potential in extraction as adsorbents due to their excellent properties such as low toxicity, reactivity, environmental friendliness, and hydrophilic and hydrophobic interactions. One of the most basic issues in the development of adsorbents is to increase the effective surface and, as a result, their extraction efficiency. QDs, having an effective surface much higher than conventional nanomaterials, are a suitable option for extracting target compounds in different environments. This work comprehensively reviews QD-based extraction methods and surface modification strategies of QDs based on functional groups, ligands, and materials from 2013 to 2024. In addition, the applications of QD-based composites for the extraction of organic and inorganic analytes (residues of drugs in human blood and plasma, toxins, pesticides, pollutants from chemical industries, heavy metals, etc.) in different matrices are investigated.

Magnetic solid-phase extraction coupled with LC-MS/MS methods for the simple extraction and rapid determination of sugammadex in human plasma

Sugammadex (SUG) is a novel antagonist of neuromuscular blocking agents (NMBAs). The NMBA rocuronium is usually employed to obtain better surgical conditions in kidney transplant. Nevertheless, rocuronium has several disadvantages, such as an increased risk of pulmonary complications. Thus, SUG is vital to kidney-transplant surgery. However, because SUG is excreted by the kidneys in prototypes, the pharmacokinetics (PK) may be affected in patients with renal impairment. We developed a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method to monitor SUG in plasma samples to investigate the PK of SUG in kidney-transplant patients. Due to the complexity and limitation of other methods of sample preparation, magnetic solid-phase extraction (MSPE) was adopted to purify samples. Chromatographic separation was obtained using a reversed-phase Polaris® C18 column and gradient elution with 0.1% formic acid (FA) in water as phase A and in methanol (MeOH) as phase B as mobile phases. The transitions 999.7 → 963.9 (m/z) and 1055.7 → 1012.2 (m/z) were used to quantify SUG and ORG26265, respectively, under negative electrospray ionization. A linear calibration curve was achieved in concentrations varying from 100 to 10 000 ng mL-1. The acceptable accuracy varied from 95.7% to 106.4%, and intra- and inter-precision did not exceed 15% (20% at the lower limit of quantitation (LLOQ)). The matrix effect, stability, dilution integrity, and carry-over were validated. This method was applied successfully for the PK study of 13 recipients and 12 donors of kidney transplant after intravenous injection of SUG (2 mL per kg bodyweight).

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite as an effective adsorbent for dispersive solid phase micro-extraction of cadmium in food and water samples

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite (NMC-TSO) was synthesized. It was utilized as an efficient sorbent for the dispersive solid phase microextraction (D-SPμE) without vortexing of cadmium. The analysis of the cadmium was carried out by FAAS. The effective analytical parameters including pH (6) contact times (no vortexing), sample volume (70 mL), eluent volume (3 mL of 2 mol L-1 HCl), linear dynamic ranges (1.07-85.7 μg L-1), and re-useability (33) on the D-SPμE efficiency were investigated. The PF, RSD% and LOD of the D-SPμE for cadmium were 23.3, ≤ 2.8% and 0.49 μg L-1, respectively. The tolerable concentrations of Ca2+, Mg2+, K+ and Na+ on Cd(II) were 50,000 mg L-1, 50,000 mg L-1, 25,000 mg L-1 and 7500 mg L-1, respectively. The method was accurated by analysis of food and water certificate reference materials (NW-TMDA-54.6 Lake water, SPS-WW1 121 Batch wastewater, 1573a Tomato Leaves and TORT-3 Lobster Hepatopancreas) and - recovery experiments. The D-SPμE-FAAS method was applied for the cadmium determination in dam water, wastewater, river water, well water, sea water, tea, cacao, nut, bitter chocolate, rice, leek, cinnamon and parsley.

Developments and Applications of Molecularly Imprinted Polymer-Based In-Tube Solid Phase Microextraction Technique for Efficient Sample Preparation

Despite advancements in the sensitivity and performance of analytical instruments, sample preparation remains a bottleneck in the analytical process. Currently, solid-phase extraction is more widely used than traditional organic solvent extraction due to its ease of use and lower solvent requirements. Moreover, various microextraction techniques such as micro solid-phase extraction, dispersive micro solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, liquid-phase microextraction, and magnetic bead extraction have been developed to minimize sample size, reduce solvent usage, and enable automation. Among these, in-tube solid-phase microextraction (IT-SPME) using capillaries as extraction devices has gained attention as an advanced "green extraction technique" that combines miniaturization, on-line automation, and reduced solvent consumption. Capillary tubes in IT-SPME are categorized into configurations: inner-wall-coated, particle-packed, fiber-packed, and rod monolith, operating either in a draw/eject system or a flow-through system. Additionally, the developments of novel adsorbents such as monoliths, ionic liquids, restricted-access materials, molecularly imprinted polymers (MIPs), graphene, carbon nanotubes, inorganic nanoparticles, and organometallic frameworks have improved extraction efficiency and selectivity. MIPs, in particular, are stable, custom-made polymers with molecular recognition capabilities formed during synthesis, making them exceptional "smart adsorbents" for selective sample preparation. The MIP fabrication process involves three main stages: pre-arrangement for recognition capability, polymerization, and template removal. After forming the template-monomer complex, polymerization creates a polymer network where the template molecules are anchored, and the final step involves removing the template to produce an MIP with cavities complementary to the template molecules. This review is the first paper to focus on advanced MIP-based IT-SPME, which integrates the selectivity of MIPs into efficient IT-SPME, and summarizes its recent developments and applications.

Rapidly enrichment and detection of per-and polyfluoroalkyl substances in foods using a novel bifunctional covalent organic framework

Per- and polyfluoroalkyl substances (PFASs) are extensively found in foods, posing potential toxicity to humans. Therefore, rapid analysis and monitoring of PFASs in foods are crucial for public health and also a challenge. To detect trace PFASs in foods, construction of sorbents with multiple interactions could be an effective approach. Herein, a cationic-fluorinated covalent organic framework (CF-COF) was prepared by post-modification and used as a magnetic solid-phase extraction adsorbent for adsorption of PFASs. By combining magnetic solid-phase extraction based on CF-COF with liquid chromatography-tandem mass spectrometry (LC - MS/MS), a novel method was developed for determination of eight long-chain PFASs in foods. Under optimized conditions, the method exhibited low detection limits (0.003-0.019 ng/g) and satisfactory recovery rates (73.5-118%) for PFASs. This study introduces a novel idea for the development of adsorbents targeting PFASs, along with a new analytical method for monitoring of PFASs in foods.

Magnetic materials as adsorbents for the pre-concentration and separation of active ingredients from herbal medicine

Herbal medicine (HM) is crucial in disease management and contains complex compounds with few active pharmacological ingredients, presenting challenges in quality control of raw materials and formulations. Effective separation, identification, and analysis of active components are vital for HM efficacy. Traditional methods like liquid-liquid extraction and solid-phase extraction are time-consuming and environmentally concerning, with limitations such as sorbent issues, pressure, and clogging. Magnetic solid-phase extraction uses magnetic sorbents for targeted analyte separation and enrichment, offering rapid, pressure-free separation. However, inorganic magnetic particles' aggregation and oxidation, as well as lack of selectivity, have led to the use of various coatings and modifications to enhance specificity and selectivity for complex herbal samples. This review delves into magnetic composites in HM pretreatment, specifically focusing on encapsulated or modified magnetic nanoparticles and materials like silica, ionic liquids, graphene family derivatives, carbon nanotubes, metal-organic frameworks, covalent organic frameworks, and molecularly imprinted polymers.

Recent Advances in Sample Preparation and Chromatographic/Mass Spectrometric Techniques for Detecting Polycyclic Aromatic Hydrocarbons in Edible Oils: 2010 to Present

Polycyclic aromatic hydrocarbons are considered to be potentially genotoxic and carcinogenic to humans. For non-smoking populations, food is the main source of polycyclic aromatic hydrocarbons exposure. Due to their lipophilic nature, oils and fats rank among the food items with the highest polycyclic aromatic hydrocarbon content. Consequently, the detection of polycyclic aromatic hydrocarbons in edible oils is critical for the promotion of human health. This paper reviews sample pretreatment methods, such as liquid-phase-based extraction methods, adsorbent-based extraction methods, and the QuEChERS (quick, easy, cheap, effective, rugged, and safe) method, combined with detection techniques like mass spectrometry and chromatography-based techniques for accurate quantification of polycyclic aromatic hydrocarbons in edible oils since 2010. An overview on the advances of the methods discussed herein, along with a commentary addition of current challenges and prospects, will guide researchers to focus on developing more effective detection methods and control measures to reduce the potential risks and hazards posed by polycyclic aromatic hydrocarbons.

A novel automated multi-cycle magnetic solid-phase extraction coupled to LC-MS/MS to study the disorders of six functional B vitamins in patients with gastroenterology and hyperhomocysteinemia

B vitamins are essential for human life and their disorders can cause a variety of diseases. Solid-phase extraction (SPE) coupled to LC-MS/MS is a preferred technique for determining multiple B vitamins, however, their complexity in real biological matrices makes it hard to achieve satisfactory recovery and accuracy when simultaneous detection. In this study, a novel automated multi-cycle magnetic SPE (MSPE) coupled to the LC-MS/MS method was established using a mixed-mode anion exchange magnetic adsorbent for the simultaneous extraction of six functional B vitamins, including methylmalonic acid, riboflavin, pantothenic acid, 4-pyridoxic acid, folic acid, and 5-methyltetrahydrofolate. After three consecutive MSPE cycles, the recoveries of all analytes were between 51.5% and 89.6%. The method exhibited excellent sensitivity and linearity, with a dynamic range of 200-fold (R > 0.99 for all analytes), exceptional accuracy (ranging between 95.4% and 105.6%) and precision (with RSDs ≤ 6.2%) without significant matrix effects or interferences. Compared to manual SPE method, the automated multi-cycle MSPE method has better feasibility and greater vitamin coverage. It shows a high correlation with the manual method for the detection of 5-methyltetrahydrofolate and folate (R > 0.99). A study of patients from the gastroenterology department showed that those undergoing surgery and those with malignancies may be at risk of folate deficiency. In addition, patients with hyperhomocystinemia had higher levels of methylmalonic acid and lower levels of 5-methyltetrahydrofolate, which correlated with homocysteine levels (R = 0.404 and -0.311, respectively) and showed dose-response relationships. This method is highly automated and cost-effective, with minimal systematic error, making it suitable for the analysis of clinical samples.

Preparation of magnetic amphiphilic resin microspheres via the one-step polymerization method and extraction of four glucocorticoids for HPLC-MS analysis

Amphiphilic materials can be used for sample preparation of chromatography or mass spectrometry. Amphiphilic materials with magnetic properties in combination with magnetic suction devices allow for automated sample preparation. However, conventional synthesis methods are cumbersome and not suitable for the mass production of the material. In this study, a micro-suspension polymerization method was developed to synthesize magnetic amphiphilic resin microspheres (MARMs), providing new ideas for the preparation of amphiphilic microspheres. MARMs with particle sizes ranging from 3 to 6 μm were successfully prepared, with BET surface area up to 653.2 m2/g. A magnetic solid-phase extraction method based on MARM-5 was developed for the extraction of four glucocorticoids including Cortisone, Hydrocortisone, Cortodoxone, and Corticosterone. This method had a very short adsorption time of 0.5 min and a total extraction time of only 13 min. The limit of detection for the four glucocorticoids ranged from 0.22 to 0.82 ng/L. There was a good linear relationship between sample concentration and peak area in the range of 25∼500 ng/L. Relative recovery of 98 %∼108 % and internal standard normalized matrix effect factors of 95∼114 % were obtained, and the relative standard deviation was between 2.3 % and 6.3 %. The MARMs would be used as excellent solid extraction material for glucocorticoids.

Current analytical strategies for the determination of resveratrol in foods

Resveratrol, a non-flavonoid polyphenolic compound, possesses various beneficial properties such as anti-cancer, anti-aging, anti-bacterial, and antioxidant effects. It is naturally produced by many plants in response to stimulation. However, the content of resveratrol in natural plants can vary significantly, ranging from micrograms to milligrams per kilogram. As the demand for resveratrol increases, the development of methods for extracting and quantifying resveratrol in food has become a rapidly growing field in recent years. This review aims to comprehensively summarize the progress made in resveratrol analysis in food over the past decade (2012-2022), with a specific focus on the latest advancements in extraction and detection technologies. The objective is to offer a valuable reference for further research and utilization of resveratrol in various food applications.

Magnetic solid phase extraction of aminoglycosides residue in chicken egg samples using Fe3O4-GO-Agarose-Chitosan composite

Difficulties in identification of drug residues in food products arise due to their trace amounts in complex matrices. An eco-friendly and low-cost agarose-chitosan-magnetic graphene oxide based adsorbent was synthesized and employed for determination of aminoglycosides from chicken egg samples through HPLC. Synthesized adsorbent was characterized by SEM, FTIR, XRD, and VSM. Among two investigated aminoglycosides, streptomycin was derivatized with ninhydrin while gentamicin was detected without its derivatization. Impact of experimental variables such as adsorbent dose, extraction time, temperature, pH, and analyte concentration on extraction efficiency was investigated. Statistical analysis for determination of streptomycin and gentamicin demonstrated excellent linearity in the range of 0.2-1.6 µg kg-1, LOQ of 0.3 and 0.6 µg kg-1 for streptomycin and gentamicin, respectively and LOD of 0.1 and 0.19 µg kg-1 for streptomycin and gentamicin, respectively with RSD of 2.5% and recoveries up to 94%. Regeneration studies revealed that composite film can be used four times without considerable reduction in its extraction efficiency.

A magnetic molecularly imprinted polymer based on an eco-friendly deep eutectic solvent for the selective recognition of dichlorodiphenyl trichloroethane and its degradation products in fruits and vegetables

A new magnetic molecularly imprinted polymer was successfully synthesized using a ternary deep eutectic solvent derived from caffeic acid-choline chloride-formic acid as a functional monomer, thymol-menthol deep eutectic solvent as a template, ethylene glycol dimethacrylate as a cross-linker, potassium peroxodisulfate as an initiator, and aqueous ethanol solution (90% (v/v)) as a porogen. The synthesized material was characterized and applied for magnetic solid-phase extraction of dichlorodiphenyl trichloroethane and its degradation products. Optimization of the extraction condition was carried out using the central composite design and response surface methodology. The good analytical performance of magnetic solid phase extraction/gas chromatography‒mass spectrometry using the proposed adsorbent shows a wide linear range of 0.07-500 ng g-1 with R2 greater than 0.992. Low detection limits and quantitation limits were observed in the ranges of 0.01-2.00 ng g-1 and 0.07-2.50 ng g-1, respectively. The precisions shown in terms of relative standard deviations were lower than 7.0% for intraday (n=5) and 8.6% for interday (n=5 × 3) experiments. The proposed method was applied for preconcentration and determination of dichlorodiphenyl trichloroethane and its degradation products in fruit and vegetable samples. The satisfactory recoveries of the real samples at three spiked concentrations were obtained in the range of 79.1%-110.9% with RSDs lower than 7.5%. The findings highlight the importance of developing efficient sorbents for the enrichment of persistent organic pollutants in food matrices.

The environmental sources of benzophenones: Distribution, pretreatment, analysis and removal techniques

Benzophenones (BPs) have wide practical applications in real human life due to its presence in personal care products, UV-filters, drugs, food packaging bags, etc. It enters the wastewater by daily routine activities such as showering, impacting the whole aquatic system, then posing a threat to human health. Due to this fact, the monitoring and removal of BPs in the environment is quite important. In the past decade, various novel analytical and removal techniques have been developed for the determination of BPs in environmental samples including wastewater, municipal landfill leachate, sewage sludge, and aquatic plants. This review provides a critical summary and comparison of the available cutting-edge pretreatment, determination and removal techniques of BPs in environment. It also focuses on novel materials and techniques in keeping with the concept of "green chemistry", and describes on challenges associated with the analysis of BPs, removal technologies, suggesting future development strategies.

Magnetic polyimide nanosheet strings for determination of anabolic androgenic steroids in tap-water, functional drink, and external drug by magnetic solid-phase extraction combined with gas chromatography-mass spectrometry

Magnetic polyimide (PI) nanosheet strings were prepared by wrapping PI nanosheets around the γ-Fe2O3 nanowires. The γ-Fe2O3/PIs composite was successfully used for magnetic solid-phase extraction (MSPE) of anabolic androgenic steroids (AASs). The γ-Fe2O3/PIs composite possessed adequate saturation magnetic strength (8.7 emu/g) from inner γ-Fe2O3 nanowires, and large specific surface area (154.1 m2/g) for high adsorption capacity (≥ 8.9 μg/mg for selected 9 AASs) from outer PI nanosheets. Subsequently, trace AASs in water were extracted by γ-Fe2O3/PIs and determined by gas chromatography-mass spectrometry (GC-MS) after desorption and derivatization. Under the optimized extraction and desorption conditions, the MSPE of AASs based on γ-Fe2O3/PIs was established. For purified water, the linear range was 0.01-100, 0.02-100, 0.05-100, 0.1-100 or 0.2-100 μg/L with determination coefficients (R2) greater than 0.9950. The recoveries ranged from 78.3% to 115.7%, with relative standard deviations (RSDs) between 1.9 and 11.8%. The limits of detection (LODs) were in the range of 0.0025-0.046 μg/L. For the three real samples, tap-water, functional drink, and external analgesic aerosol drug, the recoveries were 68.8-119.0%, and the corresponding RSDs were 0.4-11.0%. This study provides a new strategy for the preparation of magnetic adsorption materials and an alternative method for the detection of pollutants in aqueous samples.

Th6-Based Multicomponent Heterometallic Metal-Organic Frameworks Featuring 6,12-Connected Topology for Iodine Adsorption

Its high coordination number and tendency to cluster make Th4+ suitable for constructing metal-organic frameworks (MOFs) with novel topologies. In this work, two novel thorium-based heterometallic MOF isomers (IHEP-17 and IHEP-18) were assembled from a Th6 cluster, a multifunctional organic ligand [4-(1H-pyrazol-4-yl)benzoic acid (HPyba)], and Cu2+/Ni2+ cations via the one-pot solvothermal synthesis strategy. The framework features a 6,12-connected new topology net and contains two kinds of supramolecular cage structures, Th36M4 and Th24M2, suitable for guest exchange. Both MOF materials can efficiently adsorb I2. X-ray photoelectron spectroscopy, Raman spectroscopy, and single-crystal X-ray diffraction indicate that the adsorbed iodine is uniformly distributed within the Th36M4 cage but not the Th24M2 cage in the form of I3-.

Small nanofibrous disks for preconcentration of environmental contaminants followed by direct in-vial elution and chromatographic determination

A novel method for the extraction of river water contaminants as model analytes of ranging polarities, including bisphenols A, C, S, Z, fenoxycarb, kadethrin, and deltamethrin, using small compact fibrous disks has been developed and validated. Polymer nanofibers and microfibers prepared from poly(3-hydroxybutyrate), polypropylene, polyurethane, polyacrylonitrile, poly(lactic acid), and polycaprolactone doped with graphene were evaluated in terms of extraction efficiency, selectivity, and stability in organic solutions. Our novel extraction procedure comprised preconcentration of analytes from 150 mL river water to 1 mL of eluent using a compact nanofibrous disk freely vortexed in the sample. Small nanofibrous disks with a diameter of 10 mm were cut from a compact and mechanically stable 1-2 mm thick micro/nanofibrous sheet. After 60 min extraction in a magnetically stirred sample located in a beaker, the disk was removed from the liquid and washed with water. Then, the disk was inserted into a 1.5 mL HPLC vial and extracted with 1.0 ml methanol upon short intensive shaking. Our approach avoided the undesired problems related to the manual handling typical of "classical" SPE procedure since the extraction was carried out directly in the HPLC vial. No sample evaporation, reconstitution, or pipetting was required. The nanofibrous disk is affordable, needs no support or holder, and its use avoids creation of plastic waste originating from disposable materials. Recovery of compounds from the disks was 47.2-141.4% depending on the type of polymer used and the relative standard deviations calculated from 5 extractions ranged from 6.1 to 11.8% for poly(3-hydroxybutyrate), 6.3-14.8% for polyurethane, and 1.7-16.2% for polycaprolactone doped with graphene. A small enrichment factor was obtained for polar bisphenol S using all sorbents. A higher preconcentration reaching up to 40-fold was achieved for lipophilic compounds such as deltamethrin when using poly(3-hydroxybutyrate) and graphene-doped polycaprolactone.

Carbon nanomaterial-based membranes in solid-phase extraction

Carbon nanomaterials (CNMs) have some excellent properties that make them ideal candidates as sorbents for solid-phase extraction (SPE). However, practical difficulties related to their handling (dispersion in the atmosphere, bundling phenomena, reduced adsorption capability, sorbent loss in cartridge/column format, etc.) have hindered their direct use for conventional SPE modes. Therefore, researchers working in the field of extraction science have looked for new solutions to avoid the above-mentioned problems. One of these is the design of CNM-based membranes. These devices can be of two different types: membranes that are exclusively composed of CNMs (i.e. buckypaper and graphene oxide paper) and polysaccharide membranes containing dispersed CNMs. A membrane can be used either as a filter, operating under flow-through mode, or as a rotating device, operating under the action of magnetic stirring. In both cases, the main advantages arising from the use of membranes are excellent results in terms of transport rates, adsorption capability, high throughput, and ease of employment. This review covers the preparation/synthesis procedures of such membranes and their potential in SPE applications, highlighting benefits and shortcomings in comparison with conventional SPE materials (especially, microparticles carbonaceous sorbents) and devices. Further challenges and expected improvements are addressed too.

Solid Phase-Based Microextraction Techniques in Therapeutic Drug Monitoring

Therapeutic drug monitoring is an established practice for a small group of drugs, particularly those presenting narrow therapeutic windows, for which there is a direct relationship between concentration and pharmacological effects at the site of action. Drug concentrations in biological fluids are used, in addition to other clinical observation measures, to assess the patient's status, since they are the support for therapy individualization and allow assessing adherence to therapy. Monitoring these drug classes is of great importance, as it minimizes the risk of medical interactions, as well as toxic effects. In addition, the quantification of these drugs through routine toxicological tests and the development of new monitoring methodologies are extremely relevant for public health and for the well-being of the patient, and it has implications in clinical and forensic situations. In this sense, the use of new extraction procedures that employ smaller volumes of sample and organic solvents, therefore considered miniaturized and green techniques, is of great interest in this field. From these, the use of fabric-phase extractions seems appealing. Noteworthy is the fact that SPME, which was the first of these miniaturized approaches to be used in the early '90s, is still the most used solventless procedure, providing solid and sound results. The main goal of this paper is to perform a critical review of sample preparation techniques based on solid-phase microextraction for drug detection in therapeutic monitoring situations.

Recent Insights into Sample Pretreatment Methods for Mycotoxins in Different Food Matrices: A Critical Review on Novel Materials

Mycotoxins pollution is a global concern, and can pose a serious threat to human health. People and livestock eating contaminated food will encounter acute and chronic poisoning symptoms, such as carcinogenicity, acute hepatitis, and a weakened immune system. In order to prevent or reduce the exposure of human beings and livestock to mycotoxins, it is necessary to screen mycotoxins in different foods efficiently, sensitively, and selectively. Proper sample preparation is very important for the separation, purification, and enrichment of mycotoxins from complex matrices. This review provides a comprehensive summary of mycotoxins pretreatment methods since 2017, including traditionally used methods, solid-phase extraction (SPE)-based methods, liquid-liquid extraction (LLE)-based methods, matrix solid phase dispersion (MSPD), QuEChERS, and so on. The novel materials and cutting-edge technologies are systematically and comprehensively summarized. Moreover, we discuss and compare the pros and cons of different pretreatment methods and suggest a prospect.

Application of oxidized multi-walled carbon nanotubes and zeolite nanoparticles for simultaneous preconcentration of codeine and tramadol in saliva prior to HPLC determination

In this work, a dispersive micro-solid phase extraction technique along with high-performance liquid chromatography-UV detection was developed for simultaneous preconcentraion and determination of trace levels of codeine and tramadol in human saliva. This method is based on the adsorption of codeine and tramadol on a mixture of oxidized multi-walled carbon nanotubes and zeolite Y nanoparticles with 1:1 ratio as an efficient nanosorbent. Various analytical parameters influencing the adsorption step including the amount of adsorbent, the pH of the sample solution, the temperature, the stirring rate, the contact time of the sample solution, and the adsorption capacity were investigated. Based on the results, 10 mg adsorbent, sample solutions with pH = 7.6, temperature of 25 °C, stirring rate 750 rpm and contact time 15 min, in the adsorption step shows the best results for both drugs. Then the effective parameters on the analyte desorption stage such as the type of desorption solution, pH of the desorption solution, desorption time and desorption volume were investigated. Studies have shown that water/methanol (50:50 v/v) as desorption solution, pH = 2.0, desorption time of 5 min and desorption volume of 2 ml gives the best results.Chromatographic separation was performed on a RP-Shim-pack CLC-ODS-C18 column (250 mm × 4.6 mm, 5 µm) with isocratic mode. The mobile phase contained of acetonitrile:phosphate buffer (18:82, v/v) at pH = 4.5 and the flow rate was 1 ml.min^-1. The wavelength of UV detector was adjusted at 210 nm and 198 nm for codeine and tramadol, respectively.Under optimum conditions, the extraction efficiencies of 98.5% and 99.2% were achieved for codeine and tramadol respectively. Enrichment factor of 13, detection limit of 0.3 μg L^-1, relative standard deviation of 4.07 for codeine; and an enrichment factor of 15, a detection limit of 0.15 μg L^-1, and standard deviation of 2.06 for tramadol were calculated. The linear range of the procedure for each drug was 1.0 to 1000 μg L^-1. This method was successfully applied for the analysis of codeine and tramadol in saliva samples.

Magnetic Solid-Phase Extraction Based on Silica and Graphene Materials for Sensitive Analysis of Emerging Contaminants in Wastewater with the Aid of UHPLC-Orbitrap-MS

With the advancement of technology and nanotechnology, new extraction sorbents have been created and effectively used for the magnetic solid-phase extraction of target analytes. Some of the investigated sorbents have better chemical and physical properties, exhibiting high extraction efficiency and strong repeatability, combined with low detection and quantification limits. In this study graphene oxide (GO) magnetic composites were prepared and used as magnetic solid-phase extraction (MSPE) adsorbents along with synthesized silica based magnetic nanoparticles (MNPs) functionalized with the C18 group for the preconcentration of emerging contaminants (ECs) in wastewater samples generated from hospital and urban facilities. The sample preparation with magnetic materials was followed by UHPLC-Orbitrap MS analysis for the accurate identification and determination of trace amounts of pharmaceutical active compounds and artificial sweeteners in effluent wastewater. Optimal conditions were used for the extraction of ECs from the aqueous samples, prior to UHPLC-Orbitrap MS determination. The proposed methods achieved low quantitation limits between 1.1-33.6 ng L^-1 and 1.8-98.7 ng L^-1 and satisfactory recoveries in the range of 58.4%-102.6%. An intra-day precision of less than 23.1% was achieved, while inter-day RSD% values in the range of 5.6-24.8% were observed. These figures of merit suggest that our proposed methodology is suitable for the determination of target ECs in aquatic systems.

Magnetic solid-phase extraction of warfarin and gemfibrozil in biological samples using polydopamine-coated magnetic nanoparticles via core-shell nanostructure

Herein, polydopamine-coated Fe₃ O₄ spheres were synthesized using a very simple, easy, cost-effective, efficient, and fast method. First, magnetic nanoparticles (Fe₃ O₄ ) were synthesized and were followed by accommodating polydopamine on the surface of the prepared Fe₃ O₄ . The prepared polydopamine-coated Fe₃ O₄ spheres were utilized as a sorbent in magnetic solid phase extraction of gemfibrozil and warfarin (as the model analytes). The extracted model analytes were desorbed by a suitable organic solvent and were analyzed by high-performance liquid chromatography. Under optimized condition, the linearity of the method was in the range of 0.1-200.0 μg/L for the selected analytes in water. The limits of detection were calculated to be in the range of 0.026-0.055 μg/L for warfarin and gemfibrozil, respectively. The limits of quantification were calculated to be in the range of 0.089-0.185 μg/L. The inter-day and intra-day relative standard deviations were determined to be in the range of 1.4%-3.3% in three concentrations in order to calculate the method precision. Furthermore, the enrichment factors were found to be 78 and 81 for warfarin and gemfibrozil, respectively. Moreover, the calculated absolute recoveries were between 78% and 81%. The obtained recoveries indicated that the method was useful and applicable in complicated real samples.

Preparation and Application of Molecularly Imprinted Polymers for Flavonoids: Review and Perspective

The separation and detection of flavonoids from various natural products have attracted increasing attention in the field of natural product research and development. Depending on the high specificity of molecularly imprinted polymers (MIPs), MIPs are proposed as efficient adsorbents for the selective extraction and separation of flavonoids from complex samples. At present, a comprehensive review article to summarize the separation and purification of flavonoids using molecular imprinting, and the employment of MIP-based sensors for the detection of flavonoids is still lacking. Here, we reviewed the general preparation methods of MIPs towards flavonoids, including bulk polymerization, precipitation polymerization, surface imprinting and emulsion polymerization. Additionally, a variety of applications of MIPs towards flavonoids are summarized, such as the different forms of MIP-based solid phase extraction (SPE) for the separation of flavonoids, and the MIP-based sensors for the detection of flavonoids. Finally, we discussed the advantages and disadvantages of the current synthetic methods for preparing MIPs of flavonoids and prospected the approaches for detecting flavonoids in the future. The purpose of this review is to provide helpful suggestions for the novel preparation methods of MIPs for the extraction of flavonoids and emerging applications of MIPs for the detection of flavonoids from natural products and biological samples.

Determination of Organophosphate Esters in Water Samples Using Gas Chromatography– Mass Spectrometry (GC–MS) and Magnetic Solid-Phase Extraction (SPE) Based on Multi-Walled Carbon Nanotubes (MWCNTs)

A method based on gas chromatography–mass spectrometry (GC–MS), coupled with magnetic solid-phase extraction (SPE) with multi-walled carbon-nanotube (MWCNT)-coated iron oxide (Fe3O4) as the adsorbent, was developed for analyzing four organophosphate esters in ambient water samples. The magnetic, MWCNT composites were prepared by hydrothermal synthesis and characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, and superconducting quantum interference device magnetometry (SQUID). The extraction and desorption conditions, such as adsorbent dosage, adsorption time, eluent type, and eluent volume, were studied. The adsorbent was used to extract analytes within 50 min. The limit of detection (LOD) was between 0.038–1 μg/L, and the limit of quantitation (LOQ) was between 0.10–3.59 μg/L. The method was applied to analyze organophosphate esters in environmental water samples. A 72.5–89.1% recovery was obtained by analyzing spiked samples with low-, medium-, and high-concentration analytes. The relative standard deviations (RSDs) were less than 10%. This method displayed better sensitivity and accuracy; therefore, it could be successfully used to detect organophosphate esters in environmental water samples.

Magnetic Solid-Phase Extraction of Carbamate Pesticides Using Magnetic Metal-Organic Frameworks Derived from Benzoate Ligands, Followed by Digital Image Colorimetric Screening and High-Performance Liquid Chromatography Analysis

Magnetic sorbents based on iron-aluminum-mixed metal hydroxides composited with metal-organic frameworks (MOFs) were designed and synthesized using different benzoate ligands, including terephthalic acid, 2-aminoterephthalic acid, 2,5-dihydroxyterephthalic acid, 1,3,5-benzenetricarboxylic acid, and 1,2,4,5-benzenetetracarboxylic acid. The magnetic MOF derived from terephthalic acid ligand exhibited an excellent extraction efficiency, with adsorption capacities in the range of 2193-4196 mg kg^-1, and was applied for magnetic solid-phase extraction (MSPE) of carbamate pesticides, that is, bendiocarb, carbosulfan, carbofuran, carbaryl, propoxur, isoprocarb, and promecarb. Simple digital image colorimetry based on the diazotization reaction and high-performance liquid chromatography (HPLC) were utilized for fast screening and quantification purposes, respectively. A good analytical performance for a simple screening approach using portable equipment was obtained with detection limits in the range of 1.0-18.0 μg L^-1. Under the optimized MSPE-HPLC conditions, the entire developed procedure provided a wide linear range between 0.015 and 1000 μg L^-1, low limits of detection, and limits of quantitation ranging from 0.005 to 0.090 and 0.015-0.300 μg L^-1, respectively. Enrichment factors up to 184 were achieved. The intra- and interday relative standard deviations were below 6.7 and 9.4%, respectively. The proposed MSPE-digital image colorimetry and MSPE-HPLC methods were successfully applied for screening and determining carbamate pesticides in fruits and vegetables. The recoveries were obtained in a satisfactory range of 71.5-122.8%. This discovery has led to the development of integration methods using newly synthesized sorbent materials for the enrichment of carbamate pesticides prior to their analysis in complicated samples. The developed MSPE coupled with digital image colorimetry was efficient for fast carbamate contamination screening, while MSPE-HPLC offered a sensitive analytical methodology for quantifying contaminated samples.

Ionic liquid-based magnetic nanoparticles for magnetic dispersive solid-phase extraction: A review

Due to their highly tunable nature and outstanding physicochemical properties, ionic liquids (ILs) have been widely reported for use in the synthesis of multitudinous magnetic nanoparticles (MNPs). IL-based magnetic nanoparticles (IL-MNPs) have great potential in magnetic dispersive solid-phase extraction (MDSPE). At present, IL-MNPs have been successfully applied in the pretreatment of MDSPE samples from medicines, pesticides, veterinary drugs, heavy metals, dyes, additives, and proteins in agricultural products, foods and beverages, environmental water, and biological samples. In this review, the preparation of IL-MNPs and their application in MDSPE are comprehensively summarized. The structural characteristics of the introduced ILs used to prepare the IL-MNPs and the synthetic routes employed to obtain the IL-MNPs are described, including physical coating and chemical bonding methods. The IL-MNPs are then classified and described according to different modified materials, including silica-based materials, carbon-based materials, metal-organic frameworks, molecularly imprinted polymers and other interesting large/small molecules. Finally, the research prospects and development directions of IL-MNPs in the context of MDSPE are further identified.

Screening of new psychoactive substances in human plasma by magnetic solid phase extraction and LC-QTOF-MS

The emergence of new psychoactive substances (NPSs) is an increasing challenge in forensic toxicology. There are many extraction methods in use to isolate NPSs in biological fluids, including protein precipitation (PPT), liquid-liquid extraction (LLE), and solid phase extraction (SPE). However, there is a need to develop an effective extraction method with a short extraction time and low consumption of solvent. To meet these requirements, magnetic solid phase extraction (m-SPE) was attempted to isolate 40 NPSs in human plasma in this study. Forty NPSs (13 synthetic cannabinoids, 13 phenethylamines, 4 tryptamines, 4 other substances, 3 aminoindanes, 2 piperazines, 1 phencyclidine-type substance) were spiked in plasma and analyzed by m-SPE using COOH-functionalized multi-walled carbon nanotubes with magnetic nanoparticles (COOH-mMWCNTs). A liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) method was used for screening and identification of 40 target compounds. Method validation including limits of detection, recovery, matrix effect, and precision was performed for all 40 -target compounds. The limits of detection (LOD) of the 40 analytes were between 0.002 and 0.084 mg/L. Extraction recovery ranged from 36.9% to 110.6% (average 87%). Matrix effects ranged from -29.0% (ion suppression) to 9.8% (ion enhancement). Both intra- and inter-day precision values were less than 27.5% (RSD%). The accurate mass of QTOF-MS enabled the identification of analytes by exact monoisotopic mass and isotopic pattern. m-SPE was applied to extract 40 NPSs, and revealed less time-consuming and laborious than conventional SPE. This method proved to be an advantageous procedure to extract NPSs from biological fluids.

Magnetic mesoporous material derived from MIL-88B modified by l-alanine as modified QuEChERS adsorbent for the determination of 6 pesticide residues in 4 vegetables by UPLC-MS/MS

More and more attention has been paid to the improved QuEChERS (quick, easy, cheap, effective, rugged and safe) method in dealing complex sample matrices, especially for the study of QuEChERS adsorbents. In this study, a magnetic mesoporous material, which was derived from MIL-88B modified by l-alanine, was synthesized as modified QuEChERS adsorbents for the simultaneous determination of multiple pesticides (Methomyl, Isoprocarb, Carbofuran, 3-Hydroxycarbofuran, Acetamiprid, Imidacloprid) in Chinese cabbage, celery, long bean and leek. The prepared magnetic adsorbents can effectively remove interfering substances from the sample, and the proposed modified QuEChERS method can reduce sample pretreatment time via an external magnetic field. To achieve the best performance of QuEChERS method, the clean-up time and amount of QuEChERS adsorbents were investigated. Under the optimized conditions, a simple, rapid and sensitive method for the determination of 6 pesticide residues in vegetables was established by coupling the modified QuEChERS to ultrahigh-performance liquid chromatography-tandem mass spectrometry. Excellent sensitivity (The limit of detection for the 6 pesticides ranged from 0.001 to 0.020 µg kg^-1), satisfactory linearity (r² ≥ 0.9952), good recovery (73.9-107.7%) and good precision (3.6-16.9% for intraday relative standard deviation, 0.5-15.0% for interday relative standard deviation) were obtained. Compared with traditional QuEChERS method, the proposed method is simple, cost-effective, and efficient, which indicates that the method can be used to detect carbamate and neonicotinoid pesticides in real samples and provide an excellent pretreatment technique for the detection of trace multi-analytes from complex substrates.

Magnetic dispersive solid phase extraction based on carbonized cellulose-ferromagnetic nanocomposite for screening phthalate esters in aqueous samples

In this work, a sorbent of the carbonized cellulose-ferromagnetic nanocomposite has been proposed for the magnetic dispersive solid phase extraction of some plasticizers in aqueous samples. Carbonized cellulose nanoparticles were prepared by treatment of cellulose filter paper with concentrated sulfuric acid and then loaded on Fe₃O₄ nanoparticles using coprecipitation. This sorbent is compatible with aqueous samples and can be considered as a viable sorbent for extraction of plasticizers from aqueous samples. In this study, magnetic dispersive solid phase extraction is followed by a dispersive liquid-liquid microextraction method. This combination makes the proposed approach as an efficient clean-up method with high enrichment factors for the selected analytes. The enriched analytes are monitored by gas chromatography equipped with a flame ionization detector. Parameters affecting the method efficiency were investigated in details. Under the optimized extraction conditions, limits of detection could reach up to of 0.15-0.50 µg L^-1. The satisfactory enrichment factors of 286-403 were obtained, and the extraction recoveries were found to be in the range of 57-80%. Relative standard deviations were in the range of 3-7% for intra-day and inter-day precisions for six replicate extractions at 25 µg L^-1 of each plasticizer. Calibration curves were linear in wide ranges with coefficients of determination ≥ 0.995. Eventually, efficiency of the prepared sorbent was confirmed by the extraction of some plasticizers from real samples including fruit juices, mineral water, injection solution, cola, and yoghourt drink packed in plastic containers.

Recent advances in magnetic carbon nanotubes: synthesis, challenges and highlighted applications

Magnetic carbon nanotubes (MCNTs), consisting of carbon nanotubes (CNTs) and magnetic nanoparticles (MNPs), have enormous exploration and application potentials due to their superior physical and chemical properties, such as unique magnetism and high enrichment performance. This review concentrates on the rapid advances in the synthesis and application of magnetic carbon nanotubes. Great progress has been made in the preparation of MCNTs by developing methods including chemical vapor deposition, pyrolysis procedure, sol-gel process, template-based synthesis, filling process and hydrothermal/solvothermal method. Various applications of MCNTs as a mediator of the adsorbent in magnetic solid-phase extraction, sensors, antibacterial agents, and imaging system contrast agents, and in drug delivery and catalysis are discussed. In order to overcome the drawbacks of MCNTs, such as sidewall damage, lack of convincing quantitative characterization methods, toxicity and environmental impact, and deficiency of extraction performance, researchers proposed some solutions in recent years. We systematically review the latest advances in MCNTs and discuss the direction of future development.

Functional Hybrid Micro/Nanoentities Promote Agro-Food Safety Inspection

The rapid development of nanomaterials has provided a good theoretical basis and technical support to solve the problems of food safety inspection. The combination of functionalized composite nanomaterials and well-known detection methods is gradually applied to detect hazardous substances, such as chemical residues and toxins, in agricultural food products. This review concentrates on the latest agro-food safety inspection techniques and methodologies constructed with the assistance of new hybrid micro/nanoentities, such as molecular imprinting polymers integrated with quantum dots (MIPs@QDs), molecular imprinting polymers integrated with upconversion luminescent nanoparticles (MIPs@UCNPs), upconversion luminescent nanoparticles combined with metal-organic frameworks (UCNPs@MOFs), magnetic metal-organic frameworks (MOFs@Fe₃O₄), magnetic covalent-organic frameworks (Fe₃O₄@COFs), covalent-organic frameworks doped with quantum dots (COFs@QDs), nanobody-involved immunoassay for fast inspection, etc. The presented summary and discussion favor a relevant outlook for further integrating various disciplines, like material science, nanotechnology, and analytical methodology, for addressing new challenges that emerge in agro-food research fields.