Modification of cellulose substrate by in situ synthesis of metal-organic framework-5 for thin film microextraction of some non-steroidal anti-inflammatory drugs and their measurement by high-performance liquid chromatography-ultraviolet detector

This work, reports the successful preparation a thin film by a simple and inexpensive process for quantification of a model analytes in the urine sample using HPLC-UV. To this end, cellulose paper was employed as a substrate for the in-situ synthesis of MOF-5, to increase the resistance of the prepared film. The prepared film can be reused 26 times with no reduction in its performance. The thin film prepared by MOF-5 modified cellulose substrate was utilized in thin film microextraction (TFME) method for the extraction and preconcentration of naproxen, aspirin, tolmetin, and celecoxib. Under optimal conditions, the linear dynamic range of the target analytes was 2-500 µg L-1 with correlation coefficients (R2) ranging from 0.9961 to 0.9990. Also, the limits of detection (LODs), the limits of quantification (LOQs) and relative standard deviation (RSD%) of the proposed method for selected analytes ranged between 0.57 and 0.77 µg L-1, 1.7 to 2.3 and 3.5 % to 6.2 %, respectively. Moreover, relative recoveries varied from of 94 % to 108 %, indicating the absence of matrices effect in the proposed method. Eventually, the TFME was successfully used for the extraction of selected analytes from urine samples.

Study of High-Transverse-Momentum Higgs Boson Production in Association with a Vector Boson in the qqbb Final State with the ATLAS Detector

This Letter presents the first study of Higgs boson production in association with a vector boson (V=W or Z) in the fully hadronic qqbb final state using data recorded by the ATLAS detector at the LHC in proton-proton collisions at sqrt[s]=13  TeV and corresponding to an integrated luminosity of 137  fb^{-1}. The vector bosons and Higgs bosons are each reconstructed as large-radius jets and tagged using jet substructure techniques. Dedicated tagging algorithms exploiting b-tagging properties are used to identify jets consistent with Higgs bosons decaying into bb[over ¯]. Dominant backgrounds from multijet production are determined directly from the data, and a likelihood fit to the jet mass distribution of Higgs boson candidates is used to extract the number of signal events. The VH production cross section is measured inclusively and differentially in several ranges of Higgs boson transverse momentum: 250-450, 450-650, and greater than 650 GeV. The inclusive signal yield relative to the standard model expectation is observed to be μ=1.4_{-0.9}^{+1.0} and the corresponding cross section is 3.1±1.3(stat)_{-1.4}^{+1.8}(syst)  pb.

Measurement of the Centrality Dependence of the Dijet Yield in p+Pb Collisions at sqrt[s_{NN}]=8.16 TeV with the ATLAS Detector

ATLAS measured the centrality dependence of the dijet yield using 165  nb^{-1} of p+Pb data collected at sqrt[s_{NN}]=8.16  TeV in 2016. The event centrality, which reflects the p+Pb impact parameter, is characterized by the total transverse energy registered in the Pb-going side of the forward calorimeter. The central-to-peripheral ratio of the scaled dijet yields, R_{CP}, is evaluated, and the results are presented as a function of variables that reflect the kinematics of the initial hard parton scattering process. The R_{CP} shows a scaling with the Bjorken x of the parton originating from the proton, x_{p}, while no such trend is observed as a function of x_{Pb}. This analysis provides unique input to understanding the role of small proton spatial configurations in p+Pb collisions by covering parton momentum fractions from the valence region down to x_{p}∼10^{-3} and x_{Pb}∼4×10^{-4}.

Bacteria-templated ZIF-8 embedded in polyacrylonitrile nanofibers as a novel sorbent for thin film microextraction of benzoylurea insecticides

In the present work, the rod-like ZIF-8 (ZIF8@E coli) was prepared by fast, easy and environmentally friendly method of biomimetic mineralization with Escherichia coli bacteria as a bio-template and was exploited for the first time in the microextraction. In this regard, electrospun nanofiber mats of polyacrylonitrile (PAN) and ZIF8@E coli were prepared by electrospinning method and used as a new sorbent for thin film microextraction (TFME) of benzoylurea insecticides such as Hexaflumuron and Teflubenzuron as model analytes. The PAN/ZIF8@E coli nanocomposite was characterized using electron scanning microscopy and various spectroscopy techniques. Factors affecting the proposed extraction method were screened and optimized using the experiment design strategy. Then, the model analytes were measured by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detector after microextraction. Satisfactory figures of merit were obtained for suggested TFME-HPLC-UV under optimum conditions. The suitable linearity varied in the range of 0.5-200 μg L-1 with R2 greater than 0.9968. The limit of detections for Hexaflumuron and Teflubenzuron were 0.12 and 0.15 μg L-1, respectively. The application of the method in the real sample was investigated by analyzing the selected analytes in environmental water and food samples. The spiking recovery of the selected analytes varied in the range of 93.0-109.8 % (RSD≤7.68). The results confirm the efficient application of this new sorbent in TFME approach. Considering the high availability, ease of production, and environmental friendliness of bacteria along with the significant improvement of metal-organic framework (MOF) growth efficiency, biomimetic mineralization is expected to be efficient method for the synthesis of ordered MOFs for use in extraction fields.

Search for New Phenomena in Two-Body Invariant Mass Distributions Using Unsupervised Machine Learning for Anomaly Detection at sqrt[s]=13 TeV with the ATLAS Detector

Searches for new resonances are performed using an unsupervised anomaly-detection technique. Events with at least one electron or muon are selected from 140  fb^{-1} of pp collisions at sqrt[s]=13  TeV recorded by ATLAS at the Large Hadron Collider. The approach involves training an autoencoder on data, and subsequently defining anomalous regions based on the reconstruction loss of the decoder. Studies focus on nine invariant mass spectra that contain pairs of objects consisting of one light jet or b jet and either one lepton (e,μ), photon, or second light jet or b jet in the anomalous regions. No significant deviations from the background hypotheses are observed. Limits on contributions from generic Gaussian signals with various widths of the resonance mass are obtained for nine invariant masses in the anomalous regions.

Combined Measurement of the Higgs Boson Mass from the H→γγ and H→ZZ^{*}→4ℓ Decay Channels with the ATLAS Detector Using sqrt[s]=7, 8, and 13 TeV pp Collision Data

A measurement of the mass of the Higgs boson combining the H→ZZ^{*}→4ℓ and H→γγ decay channels is presented. The result is based on 140  fb^{-1} of proton-proton collision data collected by the ATLAS detector during LHC run 2 at a center-of-mass energy of 13 TeV combined with the run 1 ATLAS mass measurement, performed at center-of-mass energies of 7 and 8 TeV, yielding a Higgs boson mass of 125.11±0.09(stat)±0.06(syst)=125.11±0.11  GeV. This corresponds to a 0.09% precision achieved on this fundamental parameter of the Standard Model of particle physics.

Detection of Enterobacteriaceae in cerebrospinal fluid fluid of neonates with meningitis from tertiary care hospitals

OBJECTIVE

This study aimed to determine the bacteriological profile of childhood acute bacterial meningitis in Pakistan.

PATIENTS AND METHODS

The study included a total of 100 children aged between 1 month and 5 years, who were admitted with a diagnosis of meningitis based on clinical findings and positive cerebrospinal fluid (CSF) tests. Out of the 100 CSF samples collected, 21 isolates were confirmed to contain Enterobacteriaceae. The most prevalent Enterobacteriaceae species were Pseudomonas (n=8, 38.09%), Klebsiella (n=4, 19.04%), E. coli (n=4, 19.04%), and Acinetobacter (n=4, 19.04%), while Citrobacter (n=1, 4.76%) was less common. Antibiotic susceptibility patterns were analyzed for these isolates.

RESULTS

Pseudomonas (n=8) exhibited 25% resistance to cefepime and 38% resistance to imipenem. Klebsiella (n=4) showed 75% resistance to imipenem. Acinetobacter (n=4) demonstrated 50% resistance to imipenem, along with varying resistance to cefepime, amikacin, ciprofloxacin, and gentamicin. E. coli (n=4) showed 0% resistance to imipenem and amikacin. However, Citrobacter (n=1) showed 0% resistance to ciprofloxacin, aztreonam, gentamicin, amikacin, levofloxacin, and cefepime. Acute bacterial meningitis primarily affects children under 1 year of age.

CONCLUSIONS

CSF culture revealed that Gram-negative bacteria, specifically Pseudomonas spp., were the predominant pathogens in this family based on Pakistani data.

Keggin-type polyoxometalate embedded polyvinylidene fluoride for thin film microextraction of organophosphorus pesticides

The present research is the first report on the application of Keggin-type phosphotungstic acid/polyvinylidene fluoride membrane. This compound as a simple, cost-effective and novel sorbent was used for the extraction and pre-concentration of two organophosphorus pesticides in real samples in the thin film solid-phase microextraction (TFME) method. TFME as one of the sub-branches of solid phase microextraction resolves the problems of SPME methods, including their limited absorption capacity. These extraction methods have a high surface-to-volume ratio, which improves their sensitivity compared to other geometries. Under optimal conditions, the limit of detections (LODs), the limit of quantifications (LOQs), and relative standard deviation (RSD) of this method varied in the ranges of 0.29-0.31 μg L-1, 0.96-1.0 μg L-1, and 3.9%-6.2%, respectively. This method showed a linear dynamic range (LDR) of 1.0-500 μg L-1 with a coefficient of determination (r2) above 0.9978. This promising method was used to analyze malathion and diazinon.

Nanoporous carbon fiber derived from Cu-BDC metal organic framework @pencil graphite as a sorbent for solid phase microextraction of acetamiprid and imidacloprid

Solid-phase microextraction (SPME) is a sample pretreatment technique for enrichment of trace level of compounds from complex matrices. The fiber coating, as an extraction phase, is the significant part of SPME, which specifying the analytical performance of the developed SPME. In this study, a novel in situ fabricated Cu@porous carbon fiber that derived from copper benzene-1,4-dicarboxylate framework@pencil graphite (Cu-BDC MOF@PG) fiber was prepared as a SPME fiber. The Cu-BDC MOF was electrodeposited on the surface of pencil graphite. The Cu@porous carbon fiber with nanoporous structure was constructed by the direct carbonization of the electrosynthesized fiber. The Cu@porous carbon fiber showed high analytical performance for direct immersion SPME (DI-SPME) of acetamiprid and imidacloprid in fruit and vegetable samples. The SPME method was coupled by high-performance liquid chromatography-ultraviolet detection (SPME-HPLC-UV) for determination of the analytes. Under the optimized condition, good linear ranges (1-500 μg L-1 and 0.5-200 μg L-1) and acceptable limits of detection (LODs = 0.30 and 0.15 μg L-1), appropriate spiking recoveries in the range 87-109.0% were attained for acetamiprid and imidacloprid, respectively. Intra- and inter-day relative standard deviations were found within the ranges of 2.35-3.46% and 3.30-3.70%, respectively. These results signify promising potential of the in situ fabricated porous carbon fiber for SPME applications. Considering that most of the pencil graphite is made of carbon, after the carbonization of the Cu-BDC MOF@PG fiber, a unified porous carbon fiber is obtained. Compared to other reported procedures, in situ direct carbonization of Cu-BDC MOF@PG fiber was a one-step and straightforward method to fabricate carbon fiber.

Keggin type phosphotungstic acid intercalated copper-chromium-layered double hydroxide reinforced porous hollow fiber as a sorbent for hollow fiber solid phase microextraction of selected chlorophenols besides their quantification via high performance liquid chromatography

Herein, a copper-chromium-layered double hydroxide (Cu/Cr-LDH) was synthesized by the co-precipitation method. The Cu/Cr-LDH was intercalated to the Keggin-type polyoxometalate (H₃PW₁₂O₄₀). The modified LDH accommodated in the pores of hollow fiber (HF), to prepare the extracting device for the HF-solid phase microextraction method (HF-SPME). The method was used for the extraction of 4-chlorophenol, 2,4-dichlorophenol, and 2,4,6- trichlorophenol from tap water, river water, and tea sample. The extracted target analytes were quantified via high-performance liquid chromatography-UV detection. The figures of merit of the method such as, linear dynamic ranges (LDRs), limit of detections (LODs) and, limit of quantifications (LOQs), were determined based on the obtained optimum condition. Based on the results, the LDR was between 1 and 500 μg L ^- 1 and r² higher than 0.9960. The LODs and LOQs were obtained in the ranges of 0.28-0.36 µg L ^- 1 and 0.92-1.1 µg L ^- 1, respectively. The relative standard deviations ((RSDs% for inter-and intra-day) of the method for the extraction of target analytes were calculated in two different concentrations of (2 and 10 μg L ^- 1) and (5 and 10 μg L ^- 1) between 3.70% - 5.30% and 3.50% - 5.70%-respectively. The enrichment factors were obtained between 57 and 61. In order to investigate the accuracy of the method, also the relative recovery was obtained, between 93 and 105%. Finally, the proposed method was used for the extraction of the selected analytes in different water and tea samples.

Porous agarose/chitosan/graphene oxide composite coupled with deep eutectic solvent for thin film microextraction of chlorophenols

In this project, a three-dimensional graphene oxide coated agarose/chitosan (ACGO) porous film was synthesized and utilized as sorbent in thin film microextraction (TFME) technique to extract 4-chlorophenol, 2,4-dichlorophenol, 3,5-dichlorophenol and 2,4,6-trichlorophenol as the model analytes in various real samples such as agricultural waste water, honey and tea samples. In addition, deep eutectic solvent made of tetra ethyl ammonium chloride/chlorine chloride was used as a desorption solvent. The effect of various variables, such as: extraction time, stirring rate, solvent desorption volume, desorption time, ionic strength and solution pH on the extraction efficiency of the method was studied and optimized. Under the optimized condition, the linear range of the method was obtained in the range of 0.1-500μgL^-1 for testing analytes (4-chloropheol=0.1-500μgL^-1, 2,4-dichlorophenol=0.2-500μgL^-1, 3,5-dichlorophenol=0.5-500μgL^-1 and 2,4,6-trichlorophenol=0.2-500μgL^-1). The obtained correlation coefficients (r²) were between 0.9984 and 0.9994. The limits of detection (LODs) were also calculated between 0.03 - 0.13μgL^-1. The relative standard deviations (RSDs%) were obtained in the range of 2.8 to 5.9%. The enrichment factor (EFs) values for the studied analytes were also obtained in the range of 33.4-35.8. In addition, the obtained results indicated that the prepared film can potentially be used for more applications in the field of environment, food safety, and drug analysis.

Magnetic solid-phase extraction of warfarin and gemfibrozil in biological samples using polydopamine-coated magnetic nanoparticles via core-shell nanostructure

Herein, polydopamine-coated Fe₃ O₄ spheres were synthesized using a very simple, easy, cost-effective, efficient, and fast method. First, magnetic nanoparticles (Fe₃ O₄ ) were synthesized and were followed by accommodating polydopamine on the surface of the prepared Fe₃ O₄ . The prepared polydopamine-coated Fe₃ O₄ spheres were utilized as a sorbent in magnetic solid phase extraction of gemfibrozil and warfarin (as the model analytes). The extracted model analytes were desorbed by a suitable organic solvent and were analyzed by high-performance liquid chromatography. Under optimized condition, the linearity of the method was in the range of 0.1-200.0 μg/L for the selected analytes in water. The limits of detection were calculated to be in the range of 0.026-0.055 μg/L for warfarin and gemfibrozil, respectively. The limits of quantification were calculated to be in the range of 0.089-0.185 μg/L. The inter-day and intra-day relative standard deviations were determined to be in the range of 1.4%-3.3% in three concentrations in order to calculate the method precision. Furthermore, the enrichment factors were found to be 78 and 81 for warfarin and gemfibrozil, respectively. Moreover, the calculated absolute recoveries were between 78% and 81%. The obtained recoveries indicated that the method was useful and applicable in complicated real samples.

Creatine@SiO2 @Fe3 O4 nanocomposite as an efficient sorbent for magnetic solid-phase extraction of escitalopram and chlordiazepoxide from urine samples through quantitation via HPLC-UV

An efficient, cost-effective, and fast-synthesis method is presented in the current study to prepare magnetic nanoparticles covered by cheap and nitrogen-rich creatine. The hydrothermal method was used for the synthesis of the magnetic core. The prepared magnetic core was then covered by SiO₂ and subsequently functionalized using creatine. The prepared creatine@SiO₂ @Fe₃ O₄ was utilized as a sorbent in the magnetic solid-phase extraction of the selected antidepressants including escitalopram and chlordiazepoxide as the model drugs. The extracted drugs were desorbed by a suitable organic solvent and analyzed by high-performance liquid chromatography equipped with an ultraviolet detection system. The influence of different variables on the magnetic solid-phase extraction method was examined by the Plackett-Burman and Box-Behnken designs for screening and optimization, respectively. Under the obtained optimum conditions, the linear ranges of the method were found to be in the range of 1-500 µg L^-1 . The limits of detection and limits of quantification were in the range of 0.27-0.63 µg L^-1 and 0.89-1.93 µg L^-1 for the selected analytes, respectively. Furthermore, the enrichment factors were found to be 79.8 and 92.7 for chlordiazepoxide and escitalopram, respectively. The method was successfully employed for the analysis of selected drugs in urine samples.

Development of PAMAM dendrimer-modified magnetic polyoxometalate: A novel platform to reinforce mechanical and thermal properties of diglycidyl ether of bisphenol A/isophorone diamine hardener epoxy

The present study explores the mechanical and thermal properties of DGEBA/IPD epoxy reinforced with dendrimer-functionalized magnetitepolyoxometalate nanoparticles. Magnetic iron oxide nanoparticles (MNP’s) were stabilized and functionalized by the poly (amido-amine) dendrimer via encapsulation within dendrimer; afterwards, H9 [α-P2V3W15O62] polyoxometalate (POM) was modified with dendrimer-functionalized magnetic iron oxide nanoparticles (DMNP’s). The polyoxometalate can be complexed with DMNP’s via protonation of dendrimer amino groups. In the next step, dendrimer-functionalized magnetitepolyoxometalate nanoparticles (DMNP’s-POM) were loaded into diglycidyl ether of bisphenol A (DGEBA) epoxy resin. The DMNP’s-POM nanoparticles can initiate polymerizations of epoxy resin with isophorone diamine hardener (IPD); on the other hand, the terminal amino groups of the dendrimer in the DMNP’s-POM nanoparticles allow them to be covalently linked to the polymer matrix alongside the main amine hardener. The resulting epoxy/magnetitepolyoxometalate nanocomposites (DMNP’s-POM@EN 5%) are thoroughly characterized by FT-IR, FE-SEM, and XRD analysis. Probing thermal behaviors of epoxy/magnetitepolyoxometalate nanocomposites by TGA reveals that the resulting composites are degraded thermally through a simple one-step process with an initial degradation close to 340°C, and show significant stability toward heat. Dynamic Mechanical Thermal Analysis indicates that no considerable agglomerate is formed during the synthesis process, and the incorporated nanoparticles somewhat limit the segmental motions of the epoxy macromolecular chains.

A review on the recent achievements on coronaviruses recognition using electrochemical detection methods

Various coronaviruses, which cause a wide range of human and animal diseases, have emerged in the past 50 years. This may be due to their abilities to recombine, mutate, and infect multiple species and cell types. A novel coronavirus, which is a family of severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS), has been termed COVID-19 by the World Health Organization (WHO). COVID-19 is the strain that has not been previously identified in humans. The early identification and diagnosis of the virus is crucial for effective pandemic prevention. In this study, we review shortly various diagnostic methods for virus assay and focus on recent advances in electrochemical biosensors for COVID-19 detection.

Template-directed synthesis of three-dimensional metal organic framework 199-derived highly porous copper nano-foam fiber for solid-phase microextraction of some antibiotics prior to their quantification by High performance liquid chromatography

The in-situ preparation of three-dimensional MOF-199 (3D MOF-199) derived from the electrochemically prepared highly porous nano Cu foam on the surface of a flexible copper wire is reported. The 3D-Cu foam coating was used as a precursor and template for fabrication of MOF-199. The microextraction ability of the in-situ prepared 3D-MOF-199 fiber was evaluated using the prepared fiber for solid phase microextraction (SPME) of selected antibiotics including amoxicillin, azithromycin, ciprofloxacin, cefixime and gentamicin coupled to high-performance liquid chromatography with UV detection. Under the optimized condition, the calibration curves were linear in the range of 1-100 µg L ^- 1 (r² above 0.9921) for both water and urine matrices. Limits of detection and limits of quantification were 0.14-0.62 µg L ^- 1 and 0.53-2.17 µg L ^- 1 in the selected matrices, respectively. In addition, the repeatability of the method was evaluated by considering the relative standard deviation (RSD%). The intra-day and inter-day RSDs of the method with the single fiber was in the range of 2.8% to 4.9% and from 3.1% to 4.9%, respectively. Furthermore, the fiber-to-fiber reproducibility ranged from 2.9% to 5.5%. The enrichment factors were also in the range of 32 to 55. Finally, the method was successfully used for analysis of amoxicillin, azithromycin, ciprofloxacin, cefixime and gentamicin in urine samples. Relative recoveries for spiked urine samples were in the range of 90-105%.

Template-directed synthesis of zeolitic imidazolate framework-8 derived Zn-Al layered double oxides decorated on the electrochemically anodized nanoporous aluminum substrate for thin film microextraction of chlorophenols followed by determination with high-performance liquid chromatography

In this work, hierarchical ZIF-8 coated anodized aluminum foil was prepared through in situ template-directed method without addition of any zinc salt. The hierarchical sorbent was synthesized by the formation of the final HZIF-8 on the previously created layered double oxide (LDO) template. The LDO template was created by calcining the firstly in situ prepared desired layered double hydroxide (LDH) precursor coated on the electrochemically anodized porous Al foil in an air atmosphere. The microextraction ability of the extracting device was studied through direct immersion thin film microextraction (DI-TFME). The extracted analytes were quantified by high-performance liquid chromatography equipped by UV detector (HPLC-UV). The present strategy was used for the simultaneous extraction and quantification of four selected chlorophenols (CPs) (as model analyte). The variables of the TFME were optimized using response surface methodology (Plackett-Burman and Box-Behnken design). Under the obtained optimum condition, the prepared film presented acceptable extraction properties including low limits of detection (0.03-0.22 µgL^-1), good linear ranges (0.2-200 µgL^-1, r² > 0.9918) and satisfactory reproducibility (relative standard deviation, 3.6 < RSD < 5.8% for one film as inter- and intra-day RSD, 4.8 < RSD < 5.3% for film to film). Moreover, the obtained enrichment factors were in the range of 56-76. The kinetics and adsorption isotherm of the selected analytes adsorption to the prepared sorbent were also investigated. The maximum adsorption capacities of the selected analytes on the prepared sorbent were in the range of 26.4-80.1 mg g^-1. The adsorption isotherm obeyed the Langmuir and Freundlich models. Moreover, the adsorption of the selected chlorophenols on the prepared film followed the pseudo-second-order kinetic model. Finally, the HZIF-8 film was utilized for the quantification of selected CPs in different types of water and wastewater samples. The results showed satisfactory relative recoveries (93-102%) and acceptable precisions (3.6 < RSD < 9.2%).

In-situ synthesis of nanocubic cobalt oxide @ graphene oxide nanocomposite reinforced hollow fiber-solid phase microextraction for enrichment of non-steroidal anti-inflammatory drugs from human urine prior to their quantification via high-performance liquid chromatography-ultraviolet detection

The in-situ synthesis and application of nanocubic Co₃O₄-coated graphene oxide (Co₃O₄@ GO) was introduced for the first time to present a cost-effective, stable and convenient operation and a simple device for hollow fiber solid-phase microextraction (HF-SPME) of four selected nonsteroidal anti-inflammatory drugs (NSAIDs) including diclofenac, mefenamic acid, ibuprofen and indomethacin. The extracted analytes were desorbed by an appropriate organic solvent and analyzed via high-performance liquid chromatography-ultraviolet detection (HPLC-UV). The prepared sorbent was approved using different characterization methods such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). The variables effective on the Co₃O₄@GO-HF-SPME method including extraction time, desorption time, desorption solvent volume, sample pH, stirring rate and ionic strength were screened via Plackett-Burman design and then optimized by Box-Behnken design. Under optimal condition, the calibration curves were linear within the range of 1.0-200.0 µg L^-1 of analyte concentration with detection limits of 0.18-1.1 µg L^-1 and the relative standard deviations less than 10.1%. The limits of quantification (LOQs) were in the range of 0.60-3.67 µg L^-1. Matrix effect was not observed with this method; therefore, standard addition is not necessary for quantification of target compounds. The enrichment factors were obtained in the range of 49-68. The relative recoveries of the urine sample analysis were calculated in the range of 93-102%. Finally, the presented method exhibited good sensitivity, excellent repeatability, high reusability and acceptable precision, which will be a promising method to analyze various nonsteroidal anti-inflammatory drugs in urine samples.

In-situ formation of Zn-Al layered double oxides on electrochemically anodized nanoporous aluminum film as sorbent for chlorophenols extraction from water and wastewater followed by determination using HPLC

Herein, we present a simple, cost-effective, and robust strategy for the in-situ preparation of Zn-Al layered double oxides-anodized aluminum thin film via a facile hydrothermal method, followed by calcination treatment of the Zn-Al layered double hydroxide in the air atmosphere. The in-situ prepared Zn-Al layered double oxide-anodized aluminum film was implemented as sorbent for thin film microextraction of four selected chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, and pentachlorophenol), followed by high-performance liquid chromatography-ultraviolet detection. The different variables of the thin film microextraction were screened via Plackett-Burman design and then optimized through Box-Behnken design. Under the optimum condition, the method showed good linear ranges (0.2-200 μg/L) with the coefficient of determinations higher than 0.9938. The calculated limit of detections were between 0.07 and 0.56 μg/L. Relative standard deviations of the method for determination of the analytes at 5 μg/L concentration level (n = 3) were ranged from 3.5 to 3.9% (as interday). The enrichment factors were between 39 and 58. This extraction method was demonstrated to be fast, efficient, and convenient. To study the capability of the developed method for real sample analysis, tap, well, river, and two types of wastewater samples were satisfactorily analyzed.

Glutathione-stabilized Fe3 O4 nanoparticles as the sorbent for magnetic solid-phase extraction of diazepam and sertraline from urine samples through quantitation via high-performance liquid chromatography

The synthesis and application of glutathione-coated magnetic nanocomposite were introduced with the purpose of developing a stable, cheap, operationally convenient, simple, fast, sensitive, and selective device for the microextraction of diazepam and sertraline for the first time. The prepared glutathione@Fe₃ O₄ nanocomposite was used as the sorbent in the form of magnetic solid-phase extraction. Afterward, the extracted analytes were desorbed by organic solvent and analyzed by high-performance liquid chromatography-ultraviolet detection. Several influential variables such as desorption time, desorption volume, sample pH, extraction time, and sorbent amount were screened through Plackett-Burman design and then optimized via Box-Behnken design. The obtained results showed that the above-mentioned method enjoys a good linear range (0.2-500 μg/L) with the coefficient of determination higher than 0.9927, low limits of determination (0.07-0.24 μg/L), acceptable limits of quantification (0.22-0.93 μg/L), good enrichment factors (128 and 153), and good spiking recoveries (95-105%) for diazepam and sertraline under the obtained optimized condition. Analyzing the real samples results in the confirmation of the presented method and it can be applied for the analysis of various organic compounds in biological samples.

Hierarchical zeolitic imidazolate framework-67 derived from in-situ synthesized CO-Al layered double hydroxide embedded within porous-anodized aluminum foil for thin film microextraction of caffeine followed by its high performance liquid chromatography-ultraviolet detection

In this study, the in-situ conversion of the synthesized Co-Al layered double hydroxide (Co-Al LDH) nanosheets to three dimensional hierarchical zeolitic imidazolate framework-67 (3D HZIF-67) was presented as a cost-effective, highly efficient, flexible and robust sorbent to carry out the microextraction process. In the first stage, the anodized aluminum foil was prepared electrochemically. Then, the Co-Al LDH precursor was constructed on the surface of the previously-prepared anodized Al foil applying in-situ formation approach. The procedure is followed by the conversion of the prepared Co-Al LDH film to 3D HZIF-67 film via a facile solvothermal method without adding cobalt salt. The in-situ prepared 3D HZIF-67-anodized Al was used for the thin film microextraction (TFME) of caffeine. The effective factors in TFME procedure were investigated and optimized through applying Central Composite Design (CCD). In the obtained optimal condition, the calibration curves for TFME-HPLC-UV of caffeine were linear in the range of 1-200 µg L^-1 with the coefficient of determination (r²) higher than 0.9915. The limits of detection were 0.33 and 0.38 µg L^-1, in water and urine matrices, respectively. Moreover, the enrichment factors (EFs) and absolute recoveries (%AR) were also calculated as 173-198 and 57.1%-65.3%, respectively. The inter-day relative standard deviations (RSDs) were evaluated as the method precision for 20 and 200 µg L^-1 of spiked sample and were between 4.9-6.1%. The repeatability of the preparation step was investigated as batch-to-batch reproducibility and it was found to be 4.9%; as a result, the reproducibility of the presented film was approved. Finally, the proposed method was utilized to determine caffeine (as the model analyte) from different types of real samples including urine, coffee, beverage (Pepsi) and shampoo. The obtained recoveries (higher than 88%) confirmed the capability of the method for real sample analysis.

Nanocrystalline cellulose as a biotemplate for preparation of porous titania thin film as a sorbent for thin film microextraction of ketorolac, meloxicam, diclofenac and mefenamic acid

The present study included the procedure of preparing porous titania thin film using a direct nanocrystalline cellulose templating (NCC) as a bio-template. The microextraction applicability of the porous film was investigated by thin film microextraction (TFME) of the nonsteroidal anti-inflammatory drugs (NSAIDs) including ketorolac, meloxicam, diclofenac and mefenamic acid from different types of urine sample. The extracted NSAIDs were analyzed by HPLC-UV. Under optimum conditions, the calibration curves were linear within the range of 1.0-500 µg L^-1 (2.0-200 µg L^-1 for ketorolac, 2.0-500 µg L^-1 for meloxicam, 1.0-200 µg L^-1 for diclofenac and 1.0-200 µg L^-1 for mefenamic acid). The limit of detection was found to be between 0.2 and 0.5 µg L^-1. The calculated intra- and inter-day relative standard deviations RSDs% (n = 3) at concentration level of 10 µg L^-1 were less than 6.3% and 6.0%, respectively. Finally, the method was successfully applied to determine selected NSAIDs in urine samples from different human individuals.

Woven cotton yarn-graphene oxide-layered double hydroxide composite as a sorbent for thin film microextraction of nonsteroidal anti-inflammatory drugs followed by quantitation through high performance liquid chromatography

The applicability of a highly flexible and natural cotton yarn-graphene oxide-layered double hydroxide composite (CY-GO-LDH) was introduced for the extraction of the targets in the current study. For increasing the contact area of the analytes and the prepared sorbent, the green substrate was woven and employed as the substrate for the construction of GO layers. It was proved that the prepared CY-GO-LDH film is a reliable sorbent for thin film microextraction (TFME) of the nonsteroidal anti-inflammatory drugs (NSAIDs) including acetylsalicylic acid, naproxen, diclofenac, ibuprofen and mefenamic acid in human urine and plasma. Extraction factors were optimized using multivariate optimization strategy. High adherence of GO-LDH to the natural substrate made this technique more robust for routine analysis. There are two consecutive steps to optimize the parameters influencing the extraction of analytes; First, a Plackett-Burman Design (PBD) was utilized to screen the significant factors. Second, the selected factors were optimized utilizing the Box-Behnken Design (BBD). The extracted NSAIDs were analyzed by HPLC-UV. Under the obtained optimum condition, the linearity of the method was 0.2-200  μg L^-1. Limits of detection, limits of quantification and intra-day as well as inter-day RSDs were lower than 0.25  μg L^-1, 0.72  μg L^-1 and 6.1%, respectively. The method was successfully used to determine NSAIDs in different human biological fluids.

Three-dimensional Pd/Pt bimetallic nanodendrites on a highly porous copper foam fiber for headspace solid-phase microextraction of BTEX prior to their quantification by GC-FID

The preparation of bimetallic Pd/Pt nanofoam for use in fiber based solid-phase microextraction (SPME) is described. First, a highly porous copper foam was prepared on the surface of an unbreakable copper wire by an electrochemical method. Then, the substrate was covered with metallic Pd and Pt using galvanic replacement of the Cu nanofoam substrate by applying a mixture of Pd(II) and Pt(IV) ions. The procedure provided an efficient route to modify Pd/Pt nanofoams with large specific surface and low loading with expensive noble metals. The fiber was applied to headspace SPME of benzene, toluene, ethylbenzene and xylene (BTEX) (as the model compounds) in various spiked water and wastewater samples. It was followed by gas chromatography-flame ionization detection (GC-FID). A Plackett-Burman design was performed for screening the experimental factors prior to Box-Behnken design. Compared with the commercial PDMS SPME fiber (100 μm), it had higher extraction efficiency for BTEX. Under the optimum conditions, the method has low limits of detection (0.16-0.35 μg L^-1), a wide linear range (1-200 μg L^-1), relative standard deviations between 5.8 and 10.5%, and good recoveries (>85% from spiked samples). Graphical abstract Schematic presentation of a three-dimensional Pd/Pt bimetallic nanodendrites supported on a highly porous copper foam fiber for use in headspace solid phase microextraction of BTEX. They were then quantified by gas chromatography-flame ionization detector.

Magnesium-aluminum-layered double hydroxide-graphene oxide composite mixed-matrix membrane for the thin-film microextraction of diclofenac in biological fluids

Herein, the applicability of Mg-Al-layered double hydroxide-graphene oxide (LDH/GO) mixed-matrix membrane (MMM) for microextraction purposes is reported for the first time. The LDH/GO MMM was used as sorbent for the thin film microextraction (TFME) of diclofenac in human body fluids. The prepared LDH/GO composite has been incorporated into a mechanically stable polyvinylidene difluoride (PVDF) membrane. The contribution of GO in LDH/GO composites significantly improved the extraction efficiency of the TFME sorbent. After elution with methanol, diclofenac was quantified by high performance liquid chromatography-ultraviolet detection (HPLC-UV). Plackett-Burman design was used for screening the experimental factors of interest and specify the significant variables affecting the extraction efficiency. The effective factors were optimized using Box-Behnken design (BBD). Under the optimum conditions, limits of detections (LODs) were 0.14, 0.23 and 0.57 μg L^-1 in water, urine and plasma samples, respectively. Limits of quantifications (LOQs) were 0.46, 0.76 and 1.8 μg L^-1 in water, urine and plasma samples, respectively. Relative standard deviations (RSDs) at a spiked concentration of 10 μg L^-1 were 6.7, 6.9 and 7.1% (as intra-day RSD) in water, urine and plasma samples, respectively. The linear dynamic ranges (LDRs) were in the range of 0.5-200 μg L^-1. The applicability of the method was investigated by the extraction and determination of diclofenac in different biological fluids including urine and plasma samples.

Dexmedetomidine-Associated Hyperthermia: A Retrospective Cohort Study of Intensive Care Unit Admissions between 2009 and 2016

Dexmedetomidine-associated hyperthermia has not been previously studied. Analysis is warranted to determine whether this potentially dangerous complication is more prevalent than previously realised. We aimed to examine the association between dexmedetomidine and temperature ≥39.5°C, including patient characteristics, temporality and potential risk factors. We conducted a retrospective cohort study of all intensive care unit (ICU) admissions between 1 July 2009 and 31 May 2016 in a tertiary ICU in Australia. Temperature data was available for 9,782 ICU admissions. Dexmedetomidine was given intravenously to 611 (6.3%) patients at a dose of 0 to 1.5 g/kg/hour. Temperatures ≥39.5°C were recorded in 341 (3.5%) patients. Overall hospital mortality was 10.8% for all admissions and 29.3% for patients with temperatures ≥39.5°C. Dexmedetomidine exposure was more frequent in patients with temperature recordings ≥39.5°C compared to those with temperatures <39.5°C, 11.94% versus 2.94% (odds ratio [OR] 4.49; 95% confidence intervals [CI] 3.37, 5.92; P <0.001). The association was stronger for patients post-open heart surgery (OHS) with temperatures ≥39.5°C (OR 12.9; 95% CI 5.01, 31.62; P <0.001). Multivariate analysis showed an independent association between dexmedetomidine and a temperature ≥39.5°C in two particular patient groups: OHS (OR 2.72; 95% CI 1.1, 6.9; P <0.001), and obesity (OR 3.44; 95% CI 1.5, 7.9; P <0.001). Dexmedetomidine exposure is associated with an increased risk of hyperthermia. Possible risk factors are open heart surgery and obesity.

The Effect of Sub-Tenon's Bupivacaine on Oculocardiac Reflex during Strabismus Surgery and Postoperative Pain: A Randomized Clinical Trial

PURPOSE

Oculocardiac reflex (OCR), defined as bradycardia induced by manipulation of extraocular muscles, is a serious complication during strabismus surgery for which prevention and proper management is required. In the present study, we investigated the efficacy of sub-Tenon injection of bupivacaine for prevention of OCR and postoperative pain.

METHODS

A prospective randomized controlled clinical trial was conducted. Fifty patients who were candidates for strabismus surgery were randomized into case (sub-Tenon's bupivacaine injection) or control (normal saline injection) groups. Standard strabismus surgery was performed for all cases. Occurrence and severity of OCR (primary outcome) and postoperative pain (using the Visual Analog Scale) were compared between the two groups.

RESULTS

Both incidence (32% vs. 100%; P = 0.002) and severity of OCR (mean heart rate decrease, 10.1 vs. 38.7 beats/minute; P < 0.001) were significantly lower in the study group compared to those in the control group. Postoperative pain scores were significantly lower in the case group than in the control group (mean score, 2.8 vs. 5.9 at 60 minutes after surgery; P < 0.001).

CONCLUSIONS

Sub-Tenon injection of bupivacaine as a local anesthetic can significantly prevent OCR and decrease the severity of bradycardia. This technique can also diminish postoperative pain in patients who underwent strabismus surgery.