Fc-specific biotinylation of antibody using an engineered photoactivatable Z–Biotin and its biosensing application

Oriented Surface Immobilization of Antibodies Using Enzyme-Mediated Site-Specific Biotinylation for Enhanced Antigen-Binding Capacity

The effectiveness of surface-immobilized antibodies is often diminished by improper antibody orientation and limited stability, impeding the analytical performance of biosensors. Here, we report a novel enzyme-mediated strategy to biotinylate the Fc region of an anti-horseradish peroxidase (anti-HRP) antibody with site-specificity that enables oriented immobilization on a streptavidin-functionalized surface. Microbial transglutaminase (mTG) catalyzes the covalent coupling between the amine functional group on a biotin analogue (NH2-PEG4-biotin) and the side chain of a privileged glutamine residue (Q295) located on the heavy chain Fc region of IgG antibodies. For comparison, an anti-HRP antibody was biotinylated using an amine-reactive biotin analogue (NHS-PEG4-biotin) to covalently couple to lysine residues randomly located throughout the antibody. The antibody that reacted with a 40-fold excess of biotin reagent formed conjugates with a biotin-to-antibody ratio of 1.9 ± 0.3 and 5.0 ± 0.6 for the site-specific and random biotinylation strategies, respectively. Western blot analysis confirms that mTG-mediated biotinylation is restricted to the heavy chain, while lysine-targeted biotinylation is observed on both the heavy and light chains. The site-specific and randomly biotinylated antibodies were immobilized onto streptavidin-coated polystyrene 96-well plates to evaluate antigen (HRP) binding activity. The site-specific biotinylated antibody provided a 3-fold improvement in antigen binding capacity, sensitivity, and detection limit, that is attributed to the proper orientation of the antibody when immobilized through the Fc region. This chemo-enzymatic strategy is universally applicable to other antibodies for oriented antibody immobilization via site-specific linking chemistries without the need for protein engineering.

Development of a bioluminescent immunoassay based on Fc-specific conjugated antibody-nanoluciferase immunoreagents for determining aflatoxin B1

Aflatoxin B1 (AFB1) is a potent carcinogen, and is among the most hazardous mycotoxins in agricultural products. Therefore, the development of sensitive and convenient detection methods for AFB1 is significant for food safety against mycotoxins. Herein, a bioluminescent enzyme immunoassay (BLEIA) was developed for ultrasensitive detection of AFB1, based on the novel Fc-specific antibody-nanoluciferase (Ab-Nluc) conjugates which were fabricated using an IgG-binding protein-assisted photo-conjugation strategy. In indirect competitive immunoassay format, the proposed BLEIA exhibited the detection limit of 0.0232 ng mL-1, which was 37.4-fold lower than that obtained using the classical enzyme-linked immunosorbent assay (ELISA) based on Ab-horseradish peroxidase (Ab-HRP) chemical conjugates (0.868 ng mL-1). Meanwhile, the BLEIA exhibited high accuracy and precision. Thus, the proposed Fc-specific Ab-Nluc conjugates-based BLEIA provides an ultrasensitive and reliable method for detecting toxins and has potential for use in food safety monitoring.

Revolutionizing the capture efficiency of ultrasensitive digital ELISA via an antibody oriented-immobilization strategy

Bead-based digital ELISA, the most sensitive protein quantification method, has drawn much attention to exploring ultra-low abundance biomarkers in the life sciences and clinical applications. However, its major challenge refers to the low antigen capture efficiency in the immunoreaction process due to the low probability of collision between the deficient concentration of the analytes and the captured antibody-immobilized on the beads. Here, we achieved significantly improved reaction efficiency in the digital signal formation by fixing the orientation of antibodies and revealed the kinetic mechanism for the first time. A facile and fast antibody conjugation strategy that formed boronate ester complexes was designed to retain the uniform orientation of antibodies with controllable antibody density. Remarkably, the oriented immobilized antibody exhibited stronger antigen-binding capacity and faster antigen-binding speed compared to randomly immobilized antibodies, with capture efficiency increasing approximately 14-fold at 15 μg of antibody per 1 mg microbeads (0.035 antibody nm-2) under 0.5 h incubation. Combined with theoretical analysis, we verified that the improved capture efficiency of the oriented antibodies mainly originated from the considerable rise in the binding rate constant (kon) rather than the increase in antigen-binding sites, which further prominently decreased the limit of detection (LoD) in a shorter incubation time compared with the randomly immobilized antibody. In conclusion, the antibody oriented conjugation method effectively overcomes the low capture efficiency challenge of bead-based digital ELISA. It paves a promising way for further improving the digital immunoassay performance and promotes the early diagnosis of diseases by recognizing more ultra-low abundance significant biomarkers.

Fabrication of cysteine-modified antibodies with Fc-specific conjugation for covalent and oriented immobilization of native antibodies

Covalent and oriented immobilization of antibodies (Abs) can substantially improve the sensitivity and stability of solid-phase immunoassays. By modifying the natural Abs with functional groups that provide unique handles for further conjugation, Abs could be immobilized onto the solid matrices with uniform orientation. Herein, an effective approach for Fc-specific modification of Abs was developed for the oriented and covalent immobilization of Abs. Twelve photoreactive Z-domain variants, incorporated with a photoactivable probe (p-benzoyl-L-phenylalanine, Bpa) at different positions and carrying a C-terminal Cys-tag (i.e. ZBpa-Cys variants), were individually constructed and produced in Escherichia coli and tested for photo-cross-linking to various IgGs. The different ZBpa-Cys variants demonstrated large differences in photo-conjugation efficiency for the tested IgGs. The conjugation efficiencies of 17thZBpa-Cys ranged from 90 % to nearly 100 % for rabbit IgG and mouse IgG2a, IgG2b and IgG3. Other variants, including 5thZBpa-Cys, 18thZBpa-Cys, 32thZBpa-Cys, and 35thZBpa-Cys, also displayed conjugation efficiencies of 61 %-83 % for mouse IgG1, IgG2a and IgG3. Subsequently, the photo-modified Abs, namely IgG-Cys conjugates, were covalently immobilized onto a maleimide group-functionalized solid-phase carrier on the basis of the reaction of sulfhydryl and maleimide. Thus, a generic platform for the controlled and oriented immobilization of Abs was developed, and the efficacy and potential of the proposed approach for sensitive immunoassays was demonstrated by detecting human α-fetoprotein.

Electrochemical sensor for ultrasensitive sensing of biotin based on heme conjugated with gold nanoparticles and its electrooxidation mechanism

We report the fabrication of a facile sensor using heme conjugated with gold nanoparticles (AuNPs) in situ on a glass carbon electrode (GCE) for the ultrasensitive determination of biotin without antibody or streptavidin. The use of heme and AuNPs as dual amplifiers allows a very broad detection range from 0.0050 to 50.0000 μmol·L-1 and a very low detection limit of 0.0016 μmol·L-1. The mechanistic aspects were elucidated using electrochemical analyses and frontier orbital calculations showing that the electrooxidation of biotin involves a one-electron and a one-proton transfer, generating biotin sulfoxide. The heme/AuNPs/GCE sensor exhibited excellent selectivity, reproducibility and stability, indicating high robustness. The recovery was between 97.20 and 105.70% with RSD less than 8.71%, suggesting good practicability. Our studies demonstrate that this approach can be used to detect and quantify biotin in a range of foods, including milk, infant formula, flour, orange juice, mango juice, egg white and egg yolk. Furthermore, all measurements do not require any intricate preparation or pre-treatment of the foods, thus representing a great potential for point-of-care testing.

Biorecognition antifouling coatings in complex biological fluids: a review of functionalization aspects

Recent progress in biointerface research has highlighted the role of antifouling functionalizable coatings in the development of advanced biosensors for point-of-care bioanalytical and biomedical applications dealing with real-world complex samples. The resistance to nonspecific adsorption promotes the biorecognition performance and overall increases the reliability and specificity of the analysis. However, the process of modification with biorecognition elements (so-called functionalization) may influence the resulting antifouling properties. The extent of these effects concerning both functionalization procedures potentially changing the surface architecture and properties, and the physicochemical properties of anchored biorecognition elements, remains unclear and has not been summarized in the literature yet. This critical review summarizes these key functionalization aspects with respect to diverse antifouling architectures showing low or ultra-low fouling quantitative characteristics in complex biological media such as bodily fluids or raw food samples. The subsequent discussion focuses on the impact of functionalization on fouling resistance. Furthermore, this review discusses some of the drawbacks of available surface sensitive characterization methods and highlights the importance of suitable assessment of the resistance to fouling.

Oriented immobilization of antibodies onto sensing platforms - A critical review

The immunosensor has been proven a versatile tool to detect various analytes, such as food contaminants, pathogenic bacteria, antibiotics and biomarkers related to cancer. To fabricate robust and reproducible immunosensors with high sensitivity, the covalent immobilization of immunoglobulins (IgGs) in a site-specific manner contributes to better performance. Instead of the random IgG orientations result from the direct yet non-selective immobilization techniques, this review for the first time introduces the advances of stepwise yet site-selective conjugation strategies to give better biosensing efficiency. Noncovalently adsorbing IgGs is the first but decisive step to interact specifically with the Fc fragment, then following covalent conjugate can fix this uniform and antigens-favorable orientation irreversibly. In this review, we first categorized this stepwise strategy into two parts based on the different noncovalent interactions, namely adhesive layer-mediated interaction onto homofunctional support and layer-free interaction onto heterofunctional support (which displays several different functionalities on its surface that are capable to interact with IgGs). Further, the influence of ligands characteristics (synthesis strategies, spacer requirements and matrices selection) on the heterofunctional support has also been discussed. Finally, conclusions and future perspectives for the real-world application of stepwise covalent conjugation are discussed. This review provides more insights into the fabrication of high-efficiency immunosensor, and special attention has been devoted to the well-orientation of full-length IgGs onto the sensing platform.

Directional immobilization of antibody onto magnetic nanoparticles by Fc-binding protein-assisted photo-conjugation for high sensitivity detection of antigen

Immobilized antibodies with site-specific, oriented, and covalent pattern are of great significance to improve the sensitivity of solid-phase immunoassay. Here, we developed a novel antibody conjugation strategy that can immobilize antibodies in a directional and covalent manner. In this study, an IgG-Fc binding protein (Z domain) carrying a site-specific photo-crosslinker, p-benzoyl-L-phenylalanine, and a single C-terminal cysteine (Cys) handle was genetically engineered. Upon UV irradiation, the chimeric protein enables the Cys handle to couple with the native antibody in Fc-specific and covalent conjugation pattern, resulting in a novel thiolated antibody. Thus, an approach for the covalent, directional immobilization of antibodies to maleimide-modified magnetic nanoparticles (MNPs) was developed on the basis of the crosslinking between sulfhydryl and maleimide groups. The antibody-conjugated MNPs were applied in MNP-based enzyme-linked immunosorbent assay (ELISA) for the detection of carcinoembryonic antigen. The MNP-based ELISA presented a quantification linear range of 0.1-100 ng mL^-1 and detection limit of 0.02 ng mL^-1, which was approximately 100 times more sensitive than the traditional microplate ELISA (2.0 ng mL^-1). Thus, the proposed antibody immobilization approach can be used in surface functionalization for the sensitive detection of various biomarkers.

Development of site-specific antibody-conjugated immunoliposomes for sensitive detection of disease biomarkers

Liposome-based immunoassay (LIA) is an attractive protocol for amplifying the detection signals because of the excellent ability of liposomes to encapsulate signal marker compounds. The antigen-binding activity of the conjugated antibodies on the liposomal surface is crucial for the specificity and sensitivity of LIA. We present here a general platform to ensure that antibodies can conjugate onto the surface of liposomes in a site-specific and oriented manner. A His-handle-modified antibody with Fc region-specific and covalent conjugation was first fabricated using a photoactivatable Z_Bpa-His tag that was engineered using the aminoacyl-tRNA synthetase/suppressor tRNA technique. Based on the high affinity between the His tag and divalent metal ions, the novel His-modified antibody was oriented onto the surface of nickel ion-modified liposomes encapsulating horseradish peroxidase. With the prostate-specific antigen as a model, the detection efficiency of the new immunoliposomes was evaluated by chemiluminescence immunoassay. The immunoliposomes exhibited a limit of detection of 0.2 pg mL^-1, which was a six time improvement compared with that of the chemical-coupled antibody-liposome conjugates. Thus, the proposed immunoliposomes are expected to hold potential applications for the sensitive detection of various biomarkers in complicated serum samples.

Study on covalent coupling process and flow characteristics of antibody on the surface of immunoassay microfluidic chip

The immune response system of immunoassay microfluidic chips is a dynamic reaction process that continuously sends reactants to the surface of a solid carrier. Signal acquisition results from the heterogeneous immune reactions and reactant transport. Antibody immobilization is the most important part of heterogeneous immune reactions, and reactant transport is reflected in the form of fluid velocity. Here, we reported several surface modification processes on polystyrene substrates that are employed to study the relationship between the antibody immobilization and flow behavior in heterogeneous immune response processes. The antibody was immobilized using covalent grafting. Based on the mechanism of sandwich enzyme linked immunosorbent assay, a fluorescence quantitative detection method was used to evaluate the immune response process. The effects of different surface modification processes on immune response and flow behavior were studied. We identified an optimal flow velocity in the dynamic immune response system in the microfluidic chip. The immune response signal was the strongest when the average flow velocity was approximately 0.2 mm/s in the procalcitonin detection system. Compared with the amino and aldehyde group substrates, the epoxy group substrate has the highest antibody immobilization efficiency; compared with the surface modified by small molecular groups, the introduction of Poly-L-Lysine can increase the amount of antibody immobilization.

Fc-specific and covalent conjugation of a fluorescent protein to a native antibody through a photoconjugation strategy for fabrication of a novel photostable fluorescent antibody

Fluorophore-antibody conjugates with high photobleaching resistance, high chemical stability, and Fc-specific attachment is a great advantage for immunofluorescence imaging. Here, an Fc-binding protein (Z-domain) carrying a photo-cross-linker (p-benzoylphenylalanine, Bpa) fused with enhanced green fluorescent protein (EGFP), namely photoactivatable Z_Bpa-EGFP recombinant, was directly generated using the aminoacyl-tRNA synthetase/suppressor tRNA technique without any further modification. By employing the photoactivatable Z_Bpa-EGFP, an optimal approach was successfully developed which enabled EGFP to site-selectively and covalently attach to native antibody (IgG) with approximately 90% conjugation efficiency. After characterizing the Fc-specific and covalent manner of the EGFP-photoconjugated antibody, its excellent photobleaching resistance for immunofluorescence imaging was demonstrated in a model study by monitoring the toll-like receptor 4 (TLR4) expression in HepG2 cells. The proposed approach here for the preparation of a novel fluorescent antibody is available and reliable, which would play an important role in fluorescence immunoassay, and is expected to be extended to the generation of other biomolecule-photoconjugated antibodies, such as other fluorescent proteins for multiplex immunofluorescence imaging or reporter enzymes for highly sensitive enzyme immunoassays.Graphical abstract.

Bioluminescent Antibodies through Photoconjugation of Protein G-Luciferase Fusion Proteins

Bioluminescent antibodies represent attractive detection agents in both bioanalytical assays and imaging. Currently, their preparation relies on genetic fusion of luciferases to antibodies or nonspecific chemical conjugation strategies. Here, we report a generic method to generate well-defined covalent antibody-luciferase conjugates starting from commercially available monoclonal antibodies. Our approach uses fusion proteins consisting of the bright blue light-emitting luciferase NanoLuc (NL) and an Fc-binding protein domain (Gx) that can be photo-cross-linked to the antibody using UV light illumination. Green and red color variants were constructed by tight fusion of the NanoLuc with a green fluorescent acceptor domain and introduction of Cy3, respectively. To increase the already bright NanoLuc emission, tandem fusions were successfully developed in which the Gx domain is fused to two or three copies of the NanoLuc domain. The Gx-NL fusion proteins can be efficiently photo-cross-linked to all human immunoglobulin G (IgG) isotypes and most mammalian IgG's using 365 nm light, yielding antibodies with either one or two luciferase domains. The bioluminescent antibodies were successfully used in cell immunostaining and bioanalytical assays such as enzyme-linked immunosorbent assay (ELISA) and Western blotting.

Label-free detection of pepsinogen 1 and 2 by polyethylene coating Lamb microfluidic device

Early screening of gastric cancer is a critical importance for the improvement of patients' survival rate. Here, a polyethylene coating Lamb (PE-Lamb) microfluidic device with immune layer for gastric cancer label-free detection was constructed. Two serum pepsinogen 1 (PG1) and pepsinogen 2 (PG2) biomarkers were applied to screen and predict the appearance of gastric cancer. Compared with enzyme-linked immunosorbent assay (ELISA), this method achieved a higher sensitivity and less time (40 min vs 120 min). The limit of detections (LOD) were reached 60 pg/mL for PG1 and 30 pg/mL for PG2, which have two orders of magnitude lower than traditional ELISA. The linearity coefficient indexes (R²) for PG1 and PG2 were 0.992 and 0.953 respectively, which is similar to that of ELISA. In addition, PG1 and PG2 mixed antigens sample with human serum was detected by PE-Lamb approach, and the frequency response showed high reproducibility and specificity. The results indicate that PE-lamb diagnostic technique is a novel and promising method for high-throughput screening and early diagnosis of gastric cancer.