Recent trends in atomic fluorescence spectrometry towards miniaturized instrumentation-A review

A portable solid sampling visualization nano-sensor for soil Cd based on "three-phase transforming" technique

Direct analysis of solid samples is always challenging for ionic sensors due to solidified elemental presence and matrix interference. In this work, a "three-phase transforming" technique was first established to make solid sampling elemental sensors and visual detection possible in the future. For Cd transforming from soil samples, a metal ceramic heater (MCH) electrothermal vaporizer (ETV) coupled with a dielectric barrier discharge quartz trap (DBD-QT) was first utilized to fulfill the solid sampling and preconcentration of Cd in soil; for on-site analysis, a colorimetric sensor based on the trithiocyanuric acid (TMT) functionalized gold nanoparticles (AuNPs) was chosen as a chromogenic analysis model. The portable and miniature ETV-DBD apparatus directly introduced Cd from soil and then captured Cd, consuming only <130 W and 4.5 kg weight; finally, only 200 μL water was injected as eluent to dissolve Cd for the following colorimetric detection. Herein, the Cd analyte underwent a "three-phase transforming" from solid (Cd compounds in soil), to aerosol (vaporization and transportation), to solid (Cd oxides trapped on quartz surface) and to liquid (Cd2+ in eluate). Under optimized conditions, the method limit of detection (LOD) reached 0.04 mg/kg Cd (50 mg sample), fulfilling fast monitoring of Cd contamination in soil, with <20 % relative standard deviations (RSDs). The analysis time was <10 min excluding sample digestion and acid application, as well as the interference of Pb2+ on the AuNPs sensor can be eliminated via the "three-phase transforming" process, proving an excellent anti-interference for solid analysis. This "three-phase transforming" processing technique coupled with colorimetric sensor holds a great potential for direct and on-site analysis in solid samples without complicated handling, providing a fantastic methodology for the application of ionic sensors and making solid sampling elemental sensor and visual detection possible.

On-site monitoring of dissolved Sb species in natural waters by an automatic system using flow injection coupled with hydride generation atomic fluorescence spectrometer

Antimony (Sb) is a toxic and potentially carcinogenic element in the environment. The toxicity of Sb(III) is ten times that of Sb(V). Therefore, on-site monitoring technique for dissolved Sb species is crucial for the study of Sb environmental processes. In this study, an automated, portable, and cost-effective system was developed for field simultaneous analysis of Sb(III) and Sb(III + V) in natural waters. The system comprised a portable atomic fluorescence spectrometer equipped with a built-in electrochemical H2 generator to reduce the consumption of acid/borohydride solution and make the atomizer more stable for on-site analysis. Flow injection technique was also used to achieve on-line pretreatment of water samples, including filtration, acidification, pre-reduction, and hydride generation procedures. Under the optimal conditions, the limits of detection (3σ, n = 11) of the developed method were 0.015 μg/L and the linear ranges were 0.05-5.0 μg/L for both Sb(III) and Sb(III + V). The relative standard deviations (n = 11) of the spiked samples of Sb(V) were 3.2% (0.05 μg/L), 3.3% (0.2 μg/L), and 1.7% (0.5 μg/L), respectively. The spiked recoveries of lake water, treated wastewater, and seawater ranged from 97.0% to 108.5%. The novel system of flow injection coupled with hydride generation atomic fluorescence spectrometer (FI-HG-AFS) was applied to carry out an 18-h fixed-point monitoring at a secondary settling tank of a wastewater treatment facility in Xiamen University, and a 6-h real-time underway analysis in the surface seawater of Dongshan Bay, China, proving that the system was capable of long-term monitoring in the field.

Shipboard determination of arsenite and total dissolved inorganic arsenic in estuarine and coastal waters with an automated on-site-applicable atomic fluorescence spectrometer

The speciation of trace level arsenic (As) in estuarine and coastal waters is crucial for both biogeochemical and toxicological studies of this toxic metalloid. However, the accurate and on-site determination of As in complex seawater matrices is challenging because of the low concentration of As, the easy conversion of arsenite (As(III)) to arsenate (As(V)), and the considerable effect of salinity on the determination of As via conventional methods. In this study, a custom-made shipboard atomic fluorescence spectrometer (AFS) is reported for the on-site speciation of inorganic As in estuarine and coastal waters. After comprehensive optimization of the instrumental and chemical parameters, the method demonstrated high sensitivity (limits of detection: 0.02 μg L-1), good linearity (R2 > 0.999 for all calibration curves up to 8 μg L-1), high precision (relative standard deviations (RSDs) of less than 2% at 1 μg L-1 over a year-long evaluation), and excellent performance for sample analysis for different matrices with varying salinities (recoveries: 96.3%-105.3%). The portable and field-applicable AFS was successfully applied to the on-site and shipboard simultaneous determination of As(III) and total dissolved inorganic arsenic (TDIAs) in the coastal waters of Shandong, Jiangsu, Zhejiang, Fujian, and Guangdong province of China, demonstrating its robustness and applicability in harsh conditions.

Essential Components from Plant Source Oils: A Review on Extraction, Detection, Identification, and Quantification

Oils derived from plant sources, mainly fixed oils from seeds and essential oil from other parts of the plant, are gaining interest as they are the rich source of beneficial compounds that possess potential applications in different industries due to their preventive and therapeutic actions. The essential oils are used in food, medicine, cosmetics, and agriculture industries as they possess antimicrobial, anticarcinogenic, anti-inflammatory and immunomodulatory properties. Plant based oils contain polyphenols, phytochemicals, and bioactive compounds which show high antioxidant activity. The extractions of these oils are a crucial step in terms of the yield and quality attributes of plant oils. This review paper outlines the different modern extraction techniques used for the extraction of different seed oils, including microwave-assisted extraction (MAE), pressurized liquid extraction (PLE), cold-pressed extraction (CPE), ultrasound-assisted extraction (UAE), supercritical-fluid extraction (SFE), enzyme-assisted extraction (EAE), and pulsed electric field-assisted extraction (PEF). For the identification and quantification of essential and bioactive compounds present in seed oils, different modern techniques-such as high-performance liquid chromatography (HPLC), gas chromatography-mass spectrometry (GC-MS), Fourier transform infrared spectroscopy (FTIR), gas chromatography-infrared spectroscopy (GC-IR), atomic fluorescence spectroscopy (AFS), and electron microscopy (EM)-are highlighted in this review along with the beneficial effects of these essential components in different in vivo and in vitro studies and in different applications. The primary goal of this research article is to pique the attention of researchers towards the different sources, potential uses and applications of oils in different industries.

Ganoderma lucidum bran-derived blue-emissive and green-emissive carbon dots for detection of copper ions

Ganoderma lucidum bran (GB) has a broad application prospect in the preparation of activated carbon, livestock feed, and biogas, but the preparation of carbon dots (CDs) from GB has never been reported. In this work, GB was applied as a carbon source and nitrogen source to prepare both blue fluorescent CDs (BCDs) and green fluorescent CDs (GCDs). The former were prepared at 160 °C for 4 h by a hydrothermal approach, while the latter were acquired at 25 °C for 24 h by chemical oxidation. Two kinds of as-synthesized CDs exhibited unique excitation-dependent fluorescence behavior and high fluorescent chemical stability. Based on the fantastic optical behavior of the CDs, they were utilized as probes for fluorescent determination of copper ions (Cu²⁺). In the range of 1-10 μmol L^-1, the fluorescent intensity of BCDs and GCDs decreased linearly with the increase of Cu²⁺ concentration; the linear correlation coefficient reached 0.9951 and 0.9982, and the limit of detection (LOD) was 0.74 and 1.08 μmol L^-1, respectively. In addition, these CDs remained stable in 0.001-0.1 mmol L^-1 salt solutions; BCDs were more stable in the neutral pH range, but GCDs were more stable in neutral to alkaline conditions. The CDs prepared from GB are not only simple and low-cost, but also can realize the comprehensive utilization of biomass.

A paired emitter-detector diode-based photometer for the determination of sodium hypochlorite adulteration in milk

This paper reports on developing a low cost but efficient paired emitter-detector diode (PEDD)-based photometer. The photometer consists of a white light-emitting diode (LED) as the emitter diode, an RGB LED as the detector diode, and a multimeter for recoding the signal. The developed PEDD-based photometer was utilized for the determination of liquid bleach adulteration in cow milk samples. N,N-Diethyl-p-phenylenediamine sulfate aqueous solution of pH 6 was used as a probe to monitor the presence of residual active chlorine in milk. The results showed that the developed method could be used to determine sodium hypochlorite in the concentration range of 0.5 to 20.0 ppm Cl₂ with 0.14 and 0.46 ppm Cl₂ limit of detection and limit of quantification, respectively. The intraday and interday precisions of the method at two concentration levels of 5.5 and 13.7 ppm Cl₂ were 1.04% and 0.52%, and 1.81% and 1.02%, respectively. The recoveries of 114.2% and 106.9% were obtained for 5.5 and 13.7 ppm Cl₂ concentrations levels, respectively. Real sample analyzes results showed that "maybe" liquid bleach adulteration in milk is the case for local distributors of raw milk.

Determination of trace tellurium by photochemical vapor generation-atomic fluorescence spectrometry using bifunctional Co-MOF-74 for preconcentration and sensitization

The determination of trace tellurium in real samples with complicated matrix can be rather challenging due to the low abundance and interferences. Herein, we report a new method for the highly sensitive detection of Te(IV) by photochemical vapor generation-atomic fluorescence spectrometry (PVG-AFS), utilizing Co-MOF-74 as an adsorbent and a precursor of Co²⁺ ion sensitizer for preconcentration and enhanced PVG efficiency. The synthesized Co-MOF-74 can completely adsorb Te(IV) within 10 min in a wide pH range. Following filtration and re-suspension in a dilute solution of formic and acetic acid, the adsorbed Te(IV) was converted to volatile compounds under the UV irradiation and swept to AFS for detection. A limit of detection of 0.08 ng/mL for Te(IV) was obtained after a 50-fold preconcentration. The proposed method was used for analysis of various natural water samples for trace Te(IV), with satisfactory spike recoveries achieved.

Novel Platinum-Nickel Composite Trap for Simultaneous and Direct Determination of Mercury and Cadmium in Soil and Its Mechanism Study

In this work, following a metal-ceramic heater (MCH) as an electrothermal vaporizer (ETV), a novel composite Pt/Ni trap based on platinizing the foamed nickel was first fabricated to trap Hg and Cd simultaneously. So, a solid sampling Hg-Cd analyzer was developed to simultaneously detect trace Hg and Cd in soil samples, mainly consisting of an MCH, a composite Pt/Ni trap, and an atomic fluorescence spectrometer (AFS). This small-size MCH-ETV system only consumes 100 W for the complete vaporization of Hg and Cd in soil matrices. The Pt/Ni trap fulfills the complete trapping of Hg and Cd following the solid sampling MCH-ETV system and then fast releases them by heating. It was proved that trapped and released Hg and Cd by the Pt/Ni trap are atomic species using X-ray photoelectron spectroscopy (XPS) and other approaches; specially, the effective cotrapping of Hg and Cd might be due to forming alloys of Hg + Pt and Cd + Ni on the Pt/Ni trap. Under the optimized conditions, the method detection limits (LODs) of Hg and Cd reached 0.4 μg/kg and 0.04 μg/kg for a 20 mg sample size, the relative standard deviations (RSDs) were within 12% and 8% for soil samples, respectively, and the recoveries ranged from 96% to 105%, indicating favorable analytical sensitivity, precision, and accuracy. The whole analysis time can be controlled within 5 min without the soil digestion process. The proposed Hg-Cd analyzer is thus suitable for rapid detection of Hg and Cd in soil samples with advantages such as simplicity, green, and safety. Further, the proposed solid sampling ETV-composite trap method has a promising application potential in the field and rapid detection for multielements.

A Highly Integrated and Diminutive Fluorescence Detector for Point-of-Care Testing: Dual Negative Feedback Light-Emitting Diode (LED) Drive and Photoelectric Processing Circuits Design and Implementation

As an important detection tool in biochemistry, fluorescence detection has wide applications. Quantitative detection can be achieved by detecting fluorescence signals excited by excitation light at a specific wavelength range. Therefore, the key to fluorescence detection is the stable control of the excitation light and the accurate acquisition of weak photoelectric signals. Moreover, to improve portability and instantaneity, devices are developing in miniaturization and integration. As the core of such devices, fluorescence detectors should also have these features. Under this circumstance, we designed a highly integrated and diminutive fluorescence detector and focused on its excitation light driving and photoelectric signal processing. A current–light dual negative feedback light-emitting diode (LED) driving circuit was proposed to obtain constant current and luminance. In addition, a silicon photodiode (PD) was used to receive and convert the fluorescence signal to an electric signal. Then, amplifying, filtering, and analog-to-digital (A/D) converting were applied to make the detection of weak fluorescence signals possible. The test results showed that the designed circuit has wonderful performance, and the detector shows good linearity (R² = 0.9967) and sensitivity (LOD = 0.077 nM) in the detection of fluorescein sodium solution. Finally, a real-time fluorescence polymerase chain reaction (real-time PCR) of Legionella pneumophila was carried out on a homemade platform equipped with this detector, indicating that the detector met the requirements of real-time PCR detection.

Online in situ detection of local air conditions in hazardous operation scenarios

Although the risk of some hazardous operations has been greatly reduced, the changes in air conditions caused by them cannot be ignored. A lot of smoke is produced in some hazardous workplaces, which is very easy to cause air pollution. Exposed to this condition for a long time, human health is also greatly endangered. Therefore, the online detection of air conditions in hazardous workplaces is of great significance. In this work, electric welding operation is taken as an example to study the air conditions in hazardous workplaces. The real-time detection of smoke generated from electric welding operation is carried out by Laser induced breakdown spectroscopy (LIBS). The spectral line of lead is found in the smoke spectrum of lead tin wire. Some other metal elements are also detected in the smoke of the tin wire, such as Sn, Cu, Ca and K. Consequently, it is recommended to use lead-free tin wire. In addition, two welding scenarios are simulated. The results show that the generated smoke contains different element information with different welding objects. Then, the quantitative analysis of lead in smoke is carried out. It shows that the concentration of Pb can be calculated by the spectral line intensity in the spectrum. Finally, combined with the error back propagation artificial neural network (BP-ANN), different kinds of smoke are classified, and the recognition accuracy is more than 99%, which proves that the combination of LIBS and BP-ANN is developed into an important method in the monitoring of different air pollutants.

Migration Behaviors of As, Se and Pb in Ultra-Low-Emission Coal-Fired Units and Effect of Co-Firing Sewage Sludge in CFB Boilers

The migration behaviors of As, Se and Pb in ultra-low-emission coal-fired units were investigated and the effect of co-firing of sewage sludge and coal was explored in circulating fluidized-bed (CFB) boiler units. Samples of feed fuel including coal and sewage sludge, fly ash, bottom slag and desulfurization slurry were collected from five CFB units with a capacity between 150 MW and 350 MW and two pulverized coal boiler (PC) units with a capacity of 350 MW and 600 MW. The majority of As, Se and Pb in coal is released during coal combustion and enriched in fly ash. As, Se and Pb in fly ash and bottom slag are associated with inorganic matter, of which As, Se and Pb associated with silicates and aluminosilicates account for more than 60%. In the wet flue gas desulfurization (WFGD) unit, more than half of the As, Se and Pb migrates to the solid fraction and the concentrations of As, Se and Pb in fine solid particles are much higher than those in coarse solid particles and the liquid fraction. The proportions of exchangeable As, Se and Pb or associated with organic matter in gypsum are higher than those of fly ash and bottom slag. According to the two studied CFB units with blending ratios of sewage sludge below 10%, co-firing with sewage sludge has little effect on the migration and transformation characteristics of As, Se and Pb. Under a long-term acidic leaching environment, Pb in combustion by-products is in the range of low risk, while As and Se are in the range of medium risk.

Conductive electrospun composite fibers based on solid-state polymerized Poly(3,4-ethylenedioxythiophene) for simultaneous electrochemical detection of metal ions

Conductive composite fibers containing poly (3,4-ethylenedioxythiophene) (PEDOT) and silver nanoparticles (AgNPs) were fabricated by emulsion electrospinning of 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) in toluene together with aqueous solution of poly (vinyl alcohol) (PVA) and silver nanoparticles (AgNPs) in the presence of sodium dodecylsulfate followed by heat treatment at 70 °C to convert DBEDOT to conductive PEDOT via solid state polymerization (SSP). The composite fibers were characterized by scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy and thermogravimetric analysis. The PEDOT/PVA/AgNPs composite fibers deposited on a screen-printed carbon electrode (SPCE) surface exhibited good electrochemical response and was applied for simultaneous detection of heavy metal ions in a mixture, namely Zn(II), Cd(II), and Pb(II) via square wave anodic stripping voltammetry (SWASV). With added Bi⁺³ into the detection system, the bismuth film formed on the electrode allows effective alloy formation with the deposited heavy metals obtained upon reduction of the heavy metal ions, the detection of heavy metal ions after stripping was successfully accomplished with a linear range of 10-80 ppb and limits of detections (LOD) of 6, 3 and 8 ppb for Zn(II), Cd(II), and Pb(II), respectively.

An overview of Structured Biosensors for Metal Ions Determination

The determination of metal ions is important for nutritional and toxicological assessment. Atomic spectrometric techniques are highly efficient for the determination of these species, but the high costs of acquisition and maintenance hinder the application of these techniques. Inexpensive alternatives for metallic element determination are based on dedicated biosensors. These devices mimic biological systems and convert biochemical processes into physical outputs and can be used for the sensitive and selective determination of chemical species such as cations. In this work, an overview of the proposed biosensors for metal ions determination was carried out considering the last 15 years of publications. Statistical data on the applications, response mechanisms, instrumentation designs, applications of nanomaterials, and multielement analysis are herein discussed.

A simple strategy for the detection of Pb(II) and Cu(II) by an electrochemical sensor based on Zn/Ni-ZIF-8/XC-72/Nafion hybrid materials

In this study, a novel electrochemical sensor for simultaneous detection of Pb(II) and Cu(II) was constructed by using Zn/Ni-ZIF-8/XC-72/Nafion hybrid material as electrode surface modifier. XRD, FT-IR, XPS and SEM were used to study the crystal structure, functional groups, element types and morphologies of the prepared materials. The electrochemical performance of the Zn/Ni-ZIF-8/XC-72/Nafion/GCE sensor were investigated by CV, EIS and DPV. In addition, the effects of various conditions including pH, the type of buffer and the ratio of Zn/Ni-ZIF-8 to XC-72 were also explored for the determination of Pb(II) and Cu(II). Under the optimum conditions, the constructed sensor exhibited outstanding linear response of Pb(II) (0.794-39.6 ppm) and Cu(II) (0.397-19.9 ppm) with detection limits of 0.0150 and 0.0096 ppm, respectively. Finally, the fabricated sensor was further used to detect Pb(II) and Cu(II) in real samples, and the satisfactory recovery was obtained.

A software system for dispersive atomic fluorescence spectrometry based on UV digital micromirror device

A dispersive atomic fluorescence spectrometer based on a UV digital micromirror device (UV-DMD-AFS) has been proposed by our team for attenuating spectral and scattering interferences. Software is nontrivial for the automation of component control and sample analysis in the new instrument. In this work, the software was developed using the C# programming language together with multi-threading and combined with the SQLite database, which consists of component control and data acquisition, database, wavelength initialization, and real-time interference reduction module. To realize the accurate analysis of the trace heavy metal concentration, the spectral interference was avoided by measuring the non-interference wavelength, and the scattering interference was eliminated by the real-time proportional coefficient method. The microsecond rotation speed of the DMD is the key to achieving real-time reduction. The concentration of arsenic in Water Quality (GSB 07-3171-2014) was detected to validate the practicability of the software with the concentration deviation of 0.02 ng/mL.

Moving toward a Handheld "Plasma" Spectrometer for Elemental Analysis, Putting the Power of the Atom (Ion) in the Palm of Your Hand

Many of the current innovations in instrument design have been focused on making them smaller, more rugged, and eventually field transportable. The ultimate application is obvious, carrying the instrument to the field for real time sample analysis without the need for a support laboratory. Real time data are priceless when screening either biological or environmental samples, as mitigation strategies can be initiated immediately upon the discovery that contaminant metals are present in a location they were not intended to be. Additionally, smaller "handheld" instruments generally require less sample for analysis, possibly increasing sensitivity, another advantage to instrument miniaturization. While many other instruments can be made smaller just by using available micro-technologies (e.g., eNose), shrinking an ICP-MS or AES to something someone might carry in a backpack or pocket is now closer to reality than in the past, and can be traced to its origins based on a component-by-component evaluation. While the optical and mass spectrometers continue to shrink in size, the ion/excitation source remains a challenge as a tradeoff exists between excitation capabilities and the power requirements for the plasma's generation. Other supporting elements have only recently become small enough for transport. A systematic review of both where the plasma spectrometer started and the evolution of technologies currently available may provide the roadmap necessary to miniaturize the spectrometer. We identify criteria on a component-by-component basis that need to be addressed in designing a miniaturized device and recognize components (e.g., source) that probably require further optimization. For example, the excitation/ionization source must be energetic enough to take a metal from a solid state to its ionic state. Previously, a plasma required a radio frequency generator or high-power DC source, but excitation can now be accomplished with non-thermal (cold) plasma sources. Sample introduction, for solids, liquids, and gasses, presents challenges for all sources in a field instrument. Next, the interface between source and a mass detector usually requires pressure reduction techniques to get an ion from plasma to the spectrometer. Currently, plasma mass spectrometers are field ready but not necessarily handheld. Optical emission spectrometers are already capable of getting photons to the detector but could eventually be connected to your phone. Inert plasma gas generation is close to field ready if nitrogen generators can be miniaturized. Many of these components are already commercially available or at least have been reported in the literature. Comparisons to other "handheld" elemental analysis devices that employ XRF, LIBS, and electrochemical methods (and their limitations) demonstrate that a "cold" plasma-based spectrometer can be more than competitive. Migrating the cold plasma from an emission only source to a mass spectrometer source, would allow both analyte identification and potentially source apportionment through isotopic fingerprinting, and may be the last major hurdle to overcome. Finally, we offer a possible design to aid in making the cold plasma source more applicable to a field deployment.

Applied Analytical Methods for Detecting Heavy Metals in Medicinal Plants

For thousands of years, medicinal plants (MPs) have been one of the main sources of drugs worldwide. However, recently, heavy metal pollution has seriously affected the quality and safety of MPs. Consuming MPs polluted by heavy metals such as Pb, Hg, and Cu significantly threaten the health of consumers. To manage this situation, the levels of heavy metals in MPs must be controlled. In recent years, this field has attracted significant attention, but few researchers have systematically summarized various analytical methods. Therefore, it is necessary to investigate methods that can accurately and effectively detect the amount of heavy metals in MPs. Herein, some important analytical methods used to detect heavy metals in MPs and their applications have been introduced and summarized in detail. These include atomic absorption spectrometry, atomic fluorescence spectrometry, inductively coupled plasma mass spectrometry, inductively coupled plasma atomic emission spectrometry, X-ray fluorescence spectrometry, neutron activation analysis, and anodic stripping voltammetry. The characteristics of these methods were subsequently compared and analyzed. In addition, high-performance liquid chromatography, ultraviolet spectrophotometry, and disposable electrochemical sensors have also been used for heavy metal detection in MPs. To elucidate the systematic and comprehensive information, these methods have also been briefly introduced in this review.

Omic methodologies for assessing metal(-loid)s-host-microbiota interplay: A review

Omic methodologies have become key analytical tools in a wide number of research topics such as systems biology, environmental analysis, biomedicine or food analysis. They are especially useful when they are combined providing a new perspective and a holistic view of the analytical problem. Methodologies for microbiota analysis have been mostly focused on genome sequencing. However, information provided by these metagenomic studies is limited to the identification of the presence of genes, taxa and their inferred functionality. To achieve a deeper knowledge of microbial functionality in health and disease, especially in dysbiosis conditions related to metal and metalloid exposure, the introduction of additional meta-omic approaches including metabolomics, metallomics, metatranscriptomics and metaproteomics results essential. The possible impact of metals and metalloids on the gut microbiota and their effects on gut-brain axis (GBA) only begin to be figured out. To this end new analytical workflows combining powerful tools are claimed such as high resolution mass spectrometry and heteroatom-tagged proteomics for the absolute quantification of metal-containing biomolecules using the metal as a "tag" in a sensitive and selective detector (e.g. ICP-MS). This review focus on current analytical methodologies related with the analytical techniques and procedures available for metallomics and microbiota analysis with a special attention on their advantages and drawbacks.

A miniaturized UV-LED array chip-based photochemical vapor generator coupled with a point discharge optical emission spectrometer for the determination of trace selenium

Ultraviolet light emitting diode array chip-based photochemical vapor generation was combined with hollow electrode point discharge to establish a miniaturized optical emission spectrometer for efficient vapor generation and excitation of selenium.

Can low-temperature point discharge Be used as atomic emission source for sensitive determination of cyclic volatile methylsiloxanes?

Despite of increased interest in the application of miniature microplasma atomic spectrometry for environmental analytical chemistry, the amenable element detection range is limited to some metal elements and carbon due to it low power consumption. In this work, the generation of silicon atomic emission (251.6 nm and 288.2 nm) from the organosiloxanes was found possible in a low-temperature, low-power, and compact point discharge. Consequence, a tiny point discharge silicon optical emission spectrometer (μPD-OES) was exploited, and used as a novel GC detector for the determination of various cyclic volatile methyl siloxanes (cVMSs). Under the optimized conditions, the developed system provided limits of detection (LODs) of 0.2 mg L^-1, 0.04 mg L^-1, 0.03 mg L^-1 and 0.02 mg L^-1 of Si for hexamethylcyclotrisiloxane, octamethylcyclotetrasiloxane, decamethylcyclopentasiloxane and dodecamethylcyclohexasiloxane, respectively. Meanwhile, relative standard deviations (RSDs) of better than 2.3% were obtained. In contrast to gas chromatography mass spectrometer, GC-μPD-OES significantly simplifies the experimental setup with low power consumption and a miniature configuration. As far as we know, this work reports for the first time that silicon atomic emission can be generated in such low temperature microplasma. The accuracy of this system was validated by determining cVMSs in five daily-used shampoo samples collected from retail store, providing satisfactory recoveries (84%-114%) and excellent agreement with values determined by GC-MS at the 95% confidence level.

A portable electromagnetic heating-microplasma atomic emission spectrometry for direct determination of heavy metals in soil

In this work, electromagnetic heating was firstly explored as sample introduction approach in portable microplasma-atomic emission spectrometer to achieve the direct, rapid analysis of soil sample. The device primarily consists of an electromagnetic heating unit, a dielectric barrier discharge (DBD) excitation source and an optical signal acquisition unit. A W-boat was used as an electromagnetic heating medium and sample carrier, and copper coil spiraled around the tube was used as magnetic induction coil. With applying a voltage on copper coil, W-boat was electromagnetically heated to vaporize analyte-containing species for sample introduction into the microplasma. The portable battery-powered device is controlled by a miniature touch screen computer with the main advantages of small size (40.5 cm (l) × 30 cm (w) × 15 cm (h).), light weight (less than 7 kg), low-power consumption (the average power consumption is 118 W). By this method, Hg, Cd and Pb in soil were simultaneously analyzed within 4 min. Under the optimal conditions, the limits of detection for Hg, Cd and Pb in soils were 8.0 μg/kg, 17.8 μg/kg and 3.5 mg/kg, respectively, meeting the requirements for environmental quality standards for soils of China. Different types of CRM soils were analyzed, demonstrating good accuracy, stability and utility of this method. This technique could be a promising and powerful tool for on-site, rapid analysis of heavy metals in soil even other solid samples. Electromagnetic heating mode provides a good alternative for solid sampling to develop portable, miniaturized atomic spectrometers for solid sample analysis.

Simultaneous determination of heavy metals by an electrochemical method based on a nanocomposite consisting of fluorinated graphene and gold nanocage

Fluorinated graphene/gold nanocage (FGP/AuNC) nanocomposite was developed for simultaneous determination of heavy metals using square wave anodic stripping voltammetry. Under optimized conditions, with a buffer pH of 5.0, a deposition potential of - 1.25 V, and a deposition time of 140 s, the method can obtain the best results. The FGP/AuNC electrode exhibits low limits of detection (0.08, 0.09, 0.05, 0.19, 0.01 μg L^-1), wide linear ranges (6-7000, 4-6000, 6-5000, 4-4000, 6-5000 μg L^-1), and well-separated stripping peaks (at - 1.10, - 0.77, - 0.50, - 0.01, 0.31 V vs Ag/AgCl) towards Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, and Hg²⁺, respectively. Furthermore, the FGP/AuNC electrode is also used for simultaneous determination of Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, and Hg²⁺ in real samples (peanut, rape bolt, and tea). Highly consistent results are found between the electrochemical method and atomic fluorescence spectrometry/inductively coupled plasma-mass spectrometry. The method has been successfully applied to the determination of heavy metal ions in agricultural food. Graphical abstract Schematic representation of simultaneous determination of heavy metal ions by electrochemical method. The FGP/AuNC (fluorinated graphene/gold nanocage) electrode is used to simultaneous determination of Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, and Hg²⁺ by square wave anode stripping voltammetry.

Recent Advances in Nanomaterials for Analysis of Trace Heavy Metals

In an effort to achieve high sensitivity analysis methods for ultra-trace levels of heavy metals, numerous new nanomaterials are explored for the application in preconcentration processes and sensing systems. Nanomaterial-based methods have proven to be effective for selective analysis and speciation of heavy metals in combination with spectrometric techniques. This review outlined the different types of nanomaterials applied in the field of heavy metal analysis, and concentrated on the latest developments in various new materials. In particular, the functionalization of traditional materials and the exploitation of bio-functional materials could increase the specificity to target metals. The hybridization of multiple materials could improve material properties, to build novel sensor system or achieve detection-removal integration. Finally, we discussed the future perspectives of nanomaterials in the heavy metal preconcentration and sensor design, as well as their respective advantages and challenges. Despite impressive progress and widespread attention, the development of new nanomaterials and nanotechnology is still hampered by numerous challenges, particularly in the specificity to the target and the anti-interference performance in complex matrices.

A spectrophotometric method for simultaneous determination of trace ions of copper, cobalt, and nickel in the zinc sulfate solution by ultraviolet-visible spectrometry

In the zinc sulfate solution, the concentration ratio of zinc to metal ion impurities can be up to 10⁵, which causes impurity ion signals to be severely masked by the zinc signal. In particular, nickel exhibits a strong nonlinearity. Conventional spectroscopic methods are commonly used to detect multi-component analytes with similar concentrations and require the detection component to be linear to satisfy Beer-Lambert law. In order to solve high concentration ratio and nonlinear problems, a spectrophotometric method combining the extended Kalman filter and derivative methods is proposed to simultaneously determine copper, cobalt and nickel in the zinc sulfate solution by ultraviolet-visible spectroscopy. The derivative method developed by using continuous wavelet transform with a Haar wavelet function was applied to detect copper and cobalt in regions with wavelengths greater than 500nm, in which the absorbance of zinc and nickel changed to a fixed value, where linear regression graphs for copper and cobalt were established at zero-crossing wavelengths. Extended Kalman filter spectrophotometry is a filtering algorithm for nonlinear systems, so it was proposed to iteratively detect nickel concentration. The detection range was found to be 0.5-5mg/L for copper, 0.3-3mg/L for cobalt, and 0.6-6mg/L. The predicted root mean square error was 0.097 for copper, 0.049 for cobalt, and 0.206 for nickel. The average relative deviations of copper, cobalt, and nickel in 10 sets of mixed solutions were 3.19%, 2.23%, and 4.56%, respectively. The spectrophotometric method studied is suitable for real-time detection and control of trace amounts of copper, cobalt, and nickel in purification process of zinc hydrometallurgy, and can be applied to more fields.