In-situ synthesis of carbon dots-embedded europium metal-organic frameworks for ratiometric fluorescence detection of Hg2+ in aqueous environment

N-Doping CQDs as an Efficient Fluorescence Probe Based on Dynamic Quenching for Determination of Copper Ions and Alcohol Sensing in Baijiu

To address an accurate detection of heavy metal ions in Baijiu production, a nitrogen-doping carbon quantum dots (N-CQDs) was prepared by hydrothermal method from citric acid and urea. The as-prepared N-CQDs had an average particle size of 2.74 nm, and a large number of functional groups (amino, carbonyl group, etc.) attached on its surface, which obtained a 9.6% of quantum yield (QY) with relatively high and stable fluorescence performance. As a fluorescent sensor, the fluorescence of N-CQDs at 380 nm excitation wavelength could be quenched quantitatively by adding Cu2+, due to the dynamic quenching of electron transfer caused by the binding of amine groups and Cu2+, which showed excellent sensitivity and selectivity to Cu2+ in the range of 0.5-5 μM with a detection limit (LOD) of 0.032 μM. In addition, the N-CQDs as well as could be applied to quantitative determine alcohol content in the range of 10-80 V/V% depending on the fluorescence enhancement. Upon the experiment, the fluorescent mechanism was studied by Molecular dynamics (MD) simulations, which demonstrated that solvent effect played an influential role on sensing alcohol content in Baijiu. Overall, the work provided a theoretically guide for the design of fluorescence sensors to monitor heavy metal ion in liquid drinks and sense alcohol content.

Ratiometric fluorescent detection of Hg2+ using dual-emissive carbon dots in an immiscible system

A facile one-pot hydrothermal method was established to simultaneously prepare blue and yellow emissive carbon dots (BCDs and YCDs) in an immiscible system. This method eliminated the need for complex purification steps. The resulting BCDs and YCDs exhibited uniform sizes and excellent fluorescence properties. A ratiometric fluorescent probe based on B/YCDs was designed for the rapid and selective detection of Hg2+ with a detection limit of 15 nM. The probe was capable of reliable detection in real water samples with recoveries of 92.42 ~ 110.02%. To further enhance practicality, we incorporated fluorescent papers and hydrogels for visual Hg2+ detection, making it ideal for on-site applications. Additionally, a smartphone-based sensing platform, integrating RGB value analysis, was also developed for accurate Hg2+ detection. This work represents a significant advancement in the field by providing a user-friendly and cost-effective approach for sensitive on-site detection of hazardous mercury pollution.

Construction of eco-friendly dual carbon dots ratiometric fluorescence probe for highly selective and efficient sensing mercury ion

In present work, blue carbon dots (b-CDs) were derived from ammonium citrate and guanidine hydrochloride, and red carbon dots (r-CDs) were stemmed from malonate, ethylenediamine and meso‑tetra (4-carboxyphenyl) porphin based on facile hydrothermal method. Eco-friendly ratiometric fluorescence probe was innovatively constructed to effectively measure Hg2+ utilizing b-CDs and r-CDs. The developed probe displayed two typical emission peaks at 450 nm from b-CDs and 650 nm from r-CDs under the excitation at 360 nm. Mercury ion has strong quenching effect on the fluorescence intensity at 450 nm due to the electron transfer process and the fluorescence change at 450 nm was used as the response signal, whereas the fluorescence intensity at 650 nm kept unchangeable which resulted from the chemical inertness between Hg2+ and r-CDs, serving as the reference signal in the sensing system. Under optimal circumstances, this probe exhibited an excellent linearity between the fluorescence response values of ΔF450/F650 and Hg2+ concentrations over range of 0.01-10 µmol/L, and the limit of detection was down to 5.3 nmol/L. Furthermore, this probe was successfully employed for sensing Hg2+ in practical environmental water samples with satisfied recoveries of 98.5%-105.0%. The constructed ratiometric fluorescent probe provided a rapid, environmental-friendly, reliable, and efficient platform for measuring trace Hg2+ in environmental field.

A simple and stable dual-emission fluorescent system based on R6G/Eu-MOF for the rapid and sensitive determination of orientin

A stable dual-emission fluorescent system, R6G/Eu-MOF, was obtained by simple mixing Eu-MOF with fluorescent rhodamine 6G (R6G). This system not only achieved robust dual luminescence performance at 430 nm (Eu-MOF) and 555 nm (R6G) under single-wavelength excitation, but also endowed it with significantly improved fluorescence stability. Orientin (OT), a bioactive traditional Chinese medicine (TCM) component, was found to efficiently quench the dual fluorescent emissions via the synergistic effect of dynamic quenching, photo-induced electron transfer and molecular interactions. Therefore, a rapid fluorescent assay for OT was developed based on the variations in fluorescence signals at 430 nm and 555 nm, as well as the alterations in the ratio between these two signals. This method can achieve highly sensitive determination of OT in the linear range of 1.1-220 μM, with a LOD of 0.26 μM at 430 nm and 0.16 μM at 555 nm (3σ/N). The R6G/Eu-MOF hybrid exhibits significantly lower detection limits and a broader linear range for OT than either R6G or Eu-MOF alone. This work presents a simple strategy to improve the water stability of Eu-MOF and also provides a rapid analysis of small molecule drugs using a fluorescence approach based on a dual-emission MOF hybrid system.

Rapid Detection of Methyl Parathion Based on SiONPs-Eu3+ Dual-Emitting Fluoroprobe and Its On-Site Application

Herein, we pioneered an innovative methodology for the rapid identification and quantitation of methyl parathion (MP) residues, overcoming the drawbacks of existing methods such as poor selectivity, high costs, and intricate operational procedures. A dual-emitting fluoroprobe SiONPs-Eu3+ was engineered based on silica oxide nanoparticles (SiONPs) conjugated with Eu3+, and the synthetic conditions were meticulously optimized to ensure exceptional sensitivity and selectivity to 4-nitrophenol (4-NP), one of the MP hydrolytic products. Upon excitation at 317 nm, the blue fluorescence of SiONPs at 400 nm was quenched, while the red fluorescence of Eu3+ at 616 nm remained nearly unchanged, constituting a ratiometric fluorescent change that significantly enhanced the detection stability. The fluoroprobe rapidly detected 4-NP at concentrations below 80 μM within 10 s and gave a limit of detection (LOD) as low as 0.16 μM, markedly lower than the allowable residue limit of MP in China food safety standards. Also, it exhibited excellent anti-interference properties in complex matrices, remaining unaffected by common amino acids, cations, and pesticides. The underlying mechanism of the fluoroprobe was elucidated through time-dependent density functional theory (TD-DFT) calculations. Under optimized hydrolysis conditions, the detection of MP in real rice samples was successfully achieved. Furthermore, the self-developed and dual-channel portable device was conducive to on-site fluorescence detection of 4-NP, offering enhanced stability in contrast to traditional photography-based methods.

Recent advances in molecularly imprinted polymers (MIPs) for visual recognition and inhibition of α-dicarbonyl compound-mediated Maillard reaction products

α-Dicarbonyl compounds (α-DCs) are important intermediates and precursors of harmful Maillard reaction products (e.g., acrylamide and late glycosylation end-products), and they exist widely in thermoprocessed sugar- or fat-rich foods. α-DCs and their end-products are prone to accumulation in the human body and lead to the development of various chronic diseases. Therefore, detection of α-DCs and their associated hazards in food samples is crucial. This paper reviews the preparation of molecularly imprinted polymers (MIPs) enabling visual intelligent responses and the strategies for recognition and capture of α-DCs and their associated hazards, and provides a comprehensive summary of the development of visual MIPs, including integration strategies and applications with real food samples. The visual signal responses as well as the mechanisms for hazard recognition and capture are highlighted. Current challenges and prospects for visual MIPs with advanced applications in food, agricultural and environmental samples are also discussed. This review will open new horizons regarding visual MIPs for recognition and inhibition of hazards in food safety.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

Sensitive electrochemiluminescence immunosensor based on a novel luminescent europium metal-organic framework and antenna effect for detecting pro-gastrin-releasing peptide

Sensitive detection of pro-gastrin-releasing peptide (Pro-GRP) is crucial because it is a highly sensitive and specific tumor marker for small cell lung cancer. Herein, we synthesized an efficient luminescent europium metal-organic framework and developed a sandwich ECL immunosensor for the sensitive detection of Pro-GRP, which used Eu3+ as the central ion and 2,4,6-tri (4-carboxyphenyl)-1,3,5-triazine (H3TATB) as the organic ligand. H3TATB acted as a strong absorbing reagent and transferred its energy to Eu3+ via the antenna effect to enhance the ECL response signal of Eu3+. As per calculations, the ECL efficiency of Eu-TATB, which was a promising ECL luminophore, was up to 130 %. The Cu2O cube worked as a substrate to assist the electron transfer and was used as a co-reaction accelerator to catalyze S2O82- to produce more SO4•- and then enhance the ECL intensity of Eu-TATB. Under optimal experimental conditions, the ECL immunosensor had a linear range of 5 fg mL-1-50 ng mL-1 for detecting Pro-GRP with a detection limit of 1.6 fg mL-1; moreover, it demonstrated excellent stability and specificity and has been successfully applied for detecting Pro-GRP in the human serum.

Fabrication of Eu-MOFs rod-shaped nanospheres with dual emissions for ratiometric fluorescence detecting Hg2+ in water

The incorporation of novel nanostructure has been proven to significantly improve the performance of fluorescence-based sensors in terms of sensitivity, selectivity, and detection capability. Herein, a lanthanide metal-organic framework (BTC-Eu-BDC-NH2) with dual ligands of 2-aminobenzoic acid (BDC-NH2) and 1,3,5-benzene tricarboxylic acid (BTC) has been prepared for ratiometric fluorescent detection of Hg2+ through the rational one-step synthetic approach. Through adjusting the ratio of two ligands, this dual-ligands strategy not only provided two independent emissions at peaks of 435 nm and 615 nm to resist the influence of external conditions, but also introduced the visual detection with an obvious color change. Moreover, the specific rod-shaped nanospheres morphology substantially enlarged the surface area of BTC-Eu-BDC-NH2 to ensure good dispersion and rapid response during sensing. Upon the addition of Hg2+, the fluorescence at 435 nm of BTC-Eu-BDC-NH2 was obviously quenched because of the interaction between Hg2+ and -NH2 from the ligand, while the red fluorescence at 615 nm remains almost unchanged. As a result, the synthesized BTC-Eu-BDC-NH2 showed excellent performances for visual sensing detection of Hg2+ with a clear luminescent color conversion from blue to red, and the detecting range was 0-40 μM with a low detection limit of 67 nM. Finally, the developed sensor was applied to actual tap water, and a handy sensing kit was constructed by hydrogel with BTC-Eu-BDC-NH2, demonstrating its potential practical applications.

A dual-functional fluorescence probe CDs@ZIF-90 for highly specific detection of Al3+ and Hg2+ in environmental water samples

In recent years, the escalating water pollution has resulted in serious harm to human health and ecological environment due to the excessive discharge of toxic metal ions such as Al3+ and Hg2+. Therefore, it is crucial to develop a simple, efficient, and rapid detection method for monitoring the levels of the metal ions in water environment to ensure public health and ecological safety. In this study, carbon dots (CDs) containing heteroatom Si were successfully synthesized by the solvothermal method. Subsequently, a novel dual-functional fluorescent sensor (CDs@ZIF-90) was constructed by integrating CDs with zeolitic imidazolate framework-90 (ZIF-90). The fluorescent composite CDs@ZIF-90 showed outstanding optical properties and excellent structural and luminescence stability in aqueous medium. Particularly, its fluorescence at 453 nm can be remarkably enhanced by Al3+ and quenched upon exposure to Hg2+. As a result, the CDs@ZIF-90 was applied in sensitive and selective determination of Al3+ and Hg2+ ions with wide linear ranges (1-200 μM and 0.05-240 μM) and low detection limits (0.81 μM and 19.6 nM). Moreover, a convenient and rapid fluorescence test strip was also successfully prepared for visual detection of Al3+ and Hg2+ ions. This work is the first try to use the CDs@ZIF-90 fluorescence sensing material for highly sensitive and selective determination of Al3+ and Hg2+ based on "turn-on" and "turn-off" dual modes, respectively and it provides a new idea for monitoring quality of drinking water and environmental water. It is of great significance for human health and environmental protection.

Dual-state dual emission from precise chemically engineered bi-ligand MOF free from encapsulation and functionalization with self-calibration model for visual detection

Synthesis of dual-state dual emitting metal-organic frameworks (DSDE-MOFs) is uncommon and challenging. Additionally, DSDE-MOFs can fulfil the expanding need for on-site detection due to their stability and self-reference for a variety of non-analyte variables. In the present work, a novel intrinsic DSDE of chemically engineered bi-ligand Eu-based MOF (UoZ-1) was designed. The prepared UoZ-1 spherical particles were small-sized around 10-12 nm and displayed blue (425 nm) and red fluorescence (620 nm) at both states, dispersed in liquid and in solid state, when excited at 250 nm. A ratiometry platform was developed since the red emission was quenched by the addition of folic acid and the blue emission was almost remained unaffected. In the fluorometric ratiometric-mode, a dynamic linear range was recorded from 10 to 200 µM with LOD about 0.4 µM. Visual-based detection with assistance of smartphone was developed for quantification based on RGB analysis using Color Grab App. In the visual-mode, LOD as small as 2.3 µM was recorded. By utilizing the intrinsic dual-emitting UoZ-1, highly stable, recyclable, sensitive, and selective on-site visual detection of folic acid can be achieved. UoZ-1, a DSDE-MOF with no encapsulation or functionalization requirements, exhibits great potential for diverse applications.

Highly dispersive PEI-modified CDs@ZIF-L dual-emitting fluorescent sensor for detecting metal ions

The leaf-like zeolitic imidazolate framework (ZIF-L) is a promising porous nanomaterial that has attracted increasing attention as an ideal host material to encapsulate functional fluorescent nanoparticles for designing fluorescent sensors. However, owing to the large particle size, gravity readily facilitates the precipitation of the ZIF-L from the aqueous solution, and thus lead to imperfect experimental results. Herein, we report a simple and rapid synthetic method which uses the polyethyleneimine (PEI)-modified ZIF-L as a host to solve the precipitation problem and construct a dual-emitting system that combines its fluorescence with carbon dots (CDs). Furthermore, CDs@ZIF-L/PEI with dual-emitting centres could be utilised as a ratio fluorescence sensor to detect Hg2+ ions. The sensor exhibited excellent dispersibility and good selectivity for sensing Hg2+ ions, with a limit of detection (LOD) of 14.5 nM. Furthermore, experimental results reveal that the CDs@ZIF-L/PEI fluorescent sensor could be effectively dispersed into agarose and less polar organic solvents such as DMF, MeOH, EtOH and CH3CN, expanding the application scope of the fluorescent sensor.

Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging

Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.

An efficient chitosan-naphthalimide fluorescent probe for simultaneous detection and adsorption of Hg2+ and its application in seafood, water and soil environments

As a virulent heavy metal ion, Hg2+ will lead to a serious threat to ecosystem and human health. In this work, we reported a chitosan-naphthalimide fluorescent probe CS-NA-ITC for specific recognition and efficient adsorption of Hg2+. CS-NA-ITC showed no fluorescence in solution state, while the fluorescence intensity increased obviously at the presence of Hg2+, accompanied by the fluorescence color becomes from colorless to bright yellow. It displayed favorable properties like low detection limit (73 nM), extensive pH detection range (5-10) and excellent anti-interference ability. The binding pattern of CS-NA-ITC to Hg2+ was verified by Job's plot, XPS analysis and FT-IR test. In addition, CS-NA-ITC was utilized to recognition of Hg2+ in actual water and soil samples and seafood products. Furthermore, the CS-NA-ITC hydrogel could be employed as an efficient Hg2+ adsorbent with good reusability, which adsorption ability was enhanced compared to chitosan hydrogel.

Recent advances in fluorescent materials for mercury(ii) ion detection

Invading mercury would cause many serious health hazards such as kidney damage, genetic freak, and nerve injury to human body. Thus, developing highly efficient and convenient mercury detection methods is of great significance for environmental governance and protection of public health. Motivated by this problem, various testing technologies for detecting trace mercury in the environment, food, medicines or daily chemicals have been developed. Among them, the fluorescence sensing technology is a sensitive and efficient detection method for detecting Hg2+ ions due to its simple operation, rapid response and economic value. This review aims to discuss the recent advances in fluorescent materials for Hg2+ ion detection. We reviewed the Hg2+ sensing materials and divided them into seven categories according to the sensing mechanism: static quenching, photoinduced electron transfer, intramolecular charge transfer, aggregation-induced emission, metallophilic interaction, mercury-induced reactions and ligand-to-metal energy transfer. The challenges and prospects of fluorescent Hg2+ ion probes are briefly presented. We hope that this review can provide some new insights and guidance for the design and development of novel fluorescent Hg2+ ion probes to promote their applications.

MOF-based composites as photoluminescence sensing platforms for pesticides: Applications and mechanisms

Metal-organic frameworks (MOFs) have recently garnered considerable attention among reticular compounds due to their unique physicochemical properties and applications in sensing toxic compounds. On the other hand, fluorometric sensing has been widely studied for food safety and environmental protection among the various sensing methods. Thus, designing MOF-based fluorescence sensors for specific detection of hazardous compounds, especially pesticides, are incessantly needed to keep up with the continuous demands for monitoring these environmental pollution. Herein, recent MOF-based platforms for pesticide fluorescence detection are deliberated owing to sensors' emission origins and in terms of their structural properties. The influences of different guest incorporation in MOFs on pesticide fluorescence detection are summarized, and the future developments of novel MOF composites such as polyoxometalate@MOFs (POMOF), carbon quantum dots@MOFs (CDs@MOF), and organic dye@MOF are prospected for fluorescence sensing of assorted pesticides with a focus on mechanistic insights of specific detection techniques in food safety and environmental protection.

Rapid detection of the biomarker for cystinuria by a metal-organic framework fluorescent sensor

Arginine (Arg) is considered a valuable biomarker for various diseases, including cystinuria, and its concentration level holds significant implications for human health. To achieve the purposes of food evaluation and clinical diagnosis, it is imperative to develop a rapid and facile method for selective and sensitive determination of Arg. In this work, a novel fluorescent material (Ag/Eu/CDs@UiO-66) was synthesized by encapsulating carbon dots (CDs), Eu³⁺ and Ag ⁺ into UiO-66. This material can serve as a ratiometric fluorescent probe for detecting Arg. It exhibits a high sensitivity with a detection limit of 0.74 μM and a relatively broad linear range from 0-300 μM. After dispersing the composite Ag/Eu/CDs@UiO-66 in an Arg solution, the red emission of Eu³⁺ center at 613 nm was significantly enhanced, while the characteristic peak of CDs center at 440 nm remained unchanged. Therefore, a ratio fluorescence probe could be constructed based on the peak height ratio of the two emission peaks to achieve selective detection of Arg. In addition, the remarkable ratiometric luminescence response induced by Arg results in a significant color transition from blue to red under UV-lamp for Ag/Eu/CDs@UiO-66, which was convenient for visual analysis.

Modification of Carbon Dots for Metal‐Ions Detection

It is very appealing to develop cheap, highly sensitive and efficient metal ion fluorescence sensors as traditional instrument methods are inherently costly and time‐consuming. Carbon dots (CDs) are widely used for sensing metal ions, attributing to their merits of good biocompatibility, low toxicity, easy surface modification and excellent photostability. This article reviewed the research progress of CDs as metal ion sensors in recent years, and studied their modification methods and detection performances. Finally, the challenges and opportunities of CDs as metal ion sensors were also analyzed. This article is expected to provide inspiration and help for researchers focusing on CDs as metal ion sensors.

Target-activated multivalent sensing platform for improving the sensitivity and selectivity of Hg2+ detection

Sensitivity and selectivity are critical parameters to evaluate the performance of sensors. For trace detection, it remains a challenge to design a new sensor that achieves high sensitivity and selectivity simultaneously. Here, we present a target-activated dual Mg²⁺-dependent DNAzyme (MNAzyme) that served as a simple sensing model to explore the multivalency in improving the analytical sensitivity and selectivity for target detection. Mercury ion (Hg²⁺), a notorious toxic metal ion, was selected as a model target. In the presence of Hg²⁺, the thymine-rich regions of the hairpin probe and primer could hybridize to form a stable duplex via the thymine-Hg²⁺-thymine structure. Then, an intact enzyme sequence was exposed and two separate enzyme fragments were close to each other, generating a dual MNAzyme. Benefiting from the localized high-concentration of the enzyme strand, the dual MNAzyme showed a remarkable improvement in binding stability. The catalytic rate constant of the dual MNAzyme was theoretically 1.60 times higher than that of the monomeric counterpart, and the sensitivity and selectivity had 4.50 and 1.44-fold enhancement, respectively. When the dual MNAzyme was used for sensor applications, the limit of detection was determined to be 0.04 and 0.2 nM via UV-vis spectrophotometer and naked eye, respectively. Meanwhile, the method offered desirable selectivity toward Hg²⁺ against other metal ions. With the advantages of simple operation, high sensitivity, and desirable selectivity, the developed multivalent sensing platform could be easily expanded in the future for the on-site detection of other low-abundance analytes.

Tea-derived carbon dots with two ratiometric fluorescence channels for the independent detection of Hg2+ and H2O

Ratiometric fluorescence carbon dots (CDs) that serve as probes have attracted more attention on account of their unique optical properties, low toxicity, anti-interference, and internal reference. However, the facile fabrication of CDs with the aim of detecting multiple targets through mutually independent response channels is always a challenge. Herein, multifunctional label-free N-doped ratiometric fluorescence CDs (N-CDs) are developed from tea leaves extract and o-phenylenediamine by a mild solvothermal method. The prepared N-CDs are tailored with nitrogen- and oxygen-containing functional groups on the surface and contribute to splendid hydrophilia. Two completely independent ratiometric fluorescence channels of N-CDs, respectively, respond to Hg²⁺ and H₂O in a mutually independent manner. Based on the interactions of N-Hg and O-Hg, N-CDs achieve an excellently sensitive and selective detection for Hg²⁺ in the channel of I_{387 nm}/I_{351 nm}, giving a linear relationship in the range of 0-50 μM. Also, a wide range of Hg²⁺ concentration (0-100 μM) is linear to A_{374 nm} through UV-vis assay. Otherwise, the linear determination of H₂O content (0-30%) is realized in another channel (I_green/I_blue). The good performance in the independent testing of Hg²⁺ and H₂O, demonstrate that the proposed N-CDs have potential in multifunctional detection.

Luminescent Guests Encapsulated in Metal-Organic Frameworks for Portable Fluorescence Sensor and Visual Detection Applications: A Review

Metal-organic frameworks (MOFs) have excellent applicability in several fields and have significant structural advantages, due to their open pore structure, high porosity, large specific surface area, and easily modifiable and functionalized porous surface. In addition, a variety of luminescent guest (LG) species can be encapsulated in the pores of MOFs, giving MOFs a broader luminescent capability. The applications of a variety of LG@MOF sensors, constructed by doping MOFs with LGs such as lanthanide ions, carbon quantum dots, luminescent complexes, organic dyes, and metal nanoclusters, for fluorescence detection of various target analyses such as ions, biomarkers, pesticides, and preservatives are systematically introduced in this review. The development of these sensors for portable visual fluorescence sensing applications is then covered. Finally, the challenges that these sectors currently face, as well as the potential for future growth, are briefly discussed.

Recent research progress in CDs@MOFs composites: fabrication, property modulation, and application

Carbon dots (CDs) have exhibited a promising application prospect in many fields because of their good fluorescence properties, biocompatibility, low toxicity, and easy functionalization. In order to improve their photoelectricity and stability, metal-organic frameworks (MOFs) can be used as host materials to provide ideal carriers for CDs to realize the multifunctional composites of CDs and MOFs (CDs@MOFs). At present, CDs@MOFs composites have shown tremendous application potential because they have various advantages of both CDs and MOFs. In this review, the synthesis methods of CDs@MOFs composites are firstly introduced. Then, the influence of the synergy between CDs and MOFs on the regulation of their structures and optical properties is highlighted. Furthermore, the recent application researches of CDs@MOFs composites in fluorescent probes, solid-state lighting, and photoelectrocatalysis are generalized. Finally, the critical issues, challenges, and solutions on their structure and property regulation and application are put forward, and their commercialization direction is also prospected.

A Critical Review on the Development of Optical Sensors for the Determination of Heavy Metals in Water Samples. The Case of Mercury(II) Ion

Recent publications are reviewed concerning the development of sensors for the determination of mercury in drinking water, based on spectroscopic methodologies. A critical analysis is made of the specific details and figures of merit of the developed protocols. Special emphasis is directed to the validation and applicability to real samples in the usual concentration range of mercury, considering the maximum allowed limits in drinking water established by international regulations. It was found that while most publications describe in detail the synthesis, structure, and physicochemical properties of the sensing phases, they do not follow the state of the art in the analytical developments. Recommendations are provided regarding the proper method development and validation, including the setting of the calibration concentration range, the correct estimation of the limits of detection and quantitation, the concentration levels to be set for producing spiked water samples, the number of real samples for adequate validation, the comparison of the developed method with a reference technique, and other analytical features which should be followed.

Potential Development of N-Doped Carbon Dots and Metal-Oxide Carbon Dot Composites for Chemical and Biosensing

Among carbon-based nanomaterials, carbon dots (CDs) have received a surge of interest in recent years due to their attractive features such as tunable photoluminescence, cost effectiveness, nontoxic renewable resources, quick and direct reactions, chemical and superior water solubility, good cell-membrane permeability, and simple operation. CDs and their composites have a large potential for sensing contaminants present in physical systems such as water resources as well as biological systems. Tuning the properties of CDs is a very important subject. This review discusses in detail heteroatom doping (N-doped CDs, N-CDs) and the formation of metal-based CD nanocomposites using a combination of matrices, such as metals and metal oxides. The properties of N-CDs and metal-based CDs nanocomposites, their syntheses, and applications in both chemical sensing and biosensing are reviewed.

Sensing performance and mechanism of carbon dots encapsulated into metal-organic frameworks

Metal-organic frameworks (MOFs) can be combined with nanomaterials and the combined composites have excellent optical properties. Carbon dots (CDs) with tiny particle size, non-toxic and rich surface functional groups are novel fluorescent materials. Carbon dots@metal-organic frameworks (CDs@MOFs) are synthesized by encapsulating CDs into MOFs. CDs@MOFs are promising composites for the preparation of a new generation of fluorescence sensors, which combine the hybrid properties of MOFs and the special optical properties of CDs. Urged as such, we are encouraged to categorize according to the sensing mechanisms. These include fluorescence resonance energy transfer (FRET), aggregation-caused quenching (ACQ), static quenching, dynamic quenching, photo-induced electron transfer (PET), inner filter effect (IFE) and so on. Based on the above mechanisms, CDs@MOFs can specifically interact with target analytes to generate fluorescence quenching. This review covers the research progress of CDs@MOFs in recent five years (with 103 refs), synthetic design of CDs@MOFs and introduces the sensing mechanism. The current challenges and future research directions are discussed briefly. The sensing mechanism and applications of CDs@MOFs.

Ratiometric fluorescence sensing with logical operation: Theory, design and applications

The construction of ratiometric fluorescence sensing logic systems has gradually become a hot topic in fluorescence analysis, due to the multi-target analysis potential of logic operations and the high specificity and selectivity of ratiometric fluorescence sensing. In this paper, the basic principles of various logic functions implemented in ratiometric fluorescence detection are discussed in the context of sensing mechanisms, and the strategies for constructing logic systems in different ratiometric fluorescence sensing application areas are summarized. Although there are limitations such as cumbersome operations and complicated experiments, ratiometric fluorescence sensing logic circuits that combine the visualization of logic operations and the accuracy of ratiometric fluorescence are still worthy of in-depth study. This review may be useful for researchers interested in the construction of logic operations based on ratiometric fluorescence sensing applications.

A stable and highly luminescent 3D Eu(III)-organic framework for the detection of colchicine in aqueous environment

The metal-organic framework materials have an important application as sensors. In this work, a microporous three-dimensional (3D) Eu(III)-organic framework (Eu-MOF), [Eu₂(3,5-bct)(phen)₂(ox)₂(H₂O)]·H₂O, was constructed from 3,5-bis(3'-carboxyphenyl)-1,2,4-triazole (3,5-H₂bct), oxalate (ox) and 1,10-phenanthroline (phen) as a luminescent sensor. The free volume was found to be 15.7% per unit volume ignoring the free water molecules. The Eu-MOF showed bright red light due to the emission at 622 nm (⁵D₀ → ⁷F₂ transition) of the Eu(III) with high quantum yield (QY, 52.51%). The Eu-MOF exerted high luminescence stability in common organic solvents as well as aqueous solutions within a wide pH range from 4 to 11. Based on the luminescent Eu-MOF, the sensing behavior for colchicine in the aqueous environment was studied. Highly selective and sensitive detection (LOD = 2.43 × 10^-5 mol L^-1) of colchicine was observed by the Eu-MOF even in the presence of potential interfering components. The sensing mechanism for colchicine was investigated by experimental and theoretical results. It is worth noting that a film (Film@Eu-MOF) prepared by loading Eu-MOF showed intense characteristic red light emission under UV light. The luminescence color changed immediately from red to colorless when the Film@Eu-MOF came in contact with colchicine. Highly sensitive and rapid detection of colchicine in wastewater was achieved using this Film@Eu-MOF, which could be identified by the naked eye. The experimental results suggest that the synthesized Eu-MOF has potential application as a luminescent sensing material for pollutants in the environmental system.

Detection and Sorption of Heavy Metal Ions in Aqueous Media by a Fluorescent Zr(IV) Metal-Organic Framework Functionalized with 2-Picolylamine Receptor Groups

Increasing global environmental pollution due to heavy metal ions raises the importance of research on new multifunctional materials for simultaneous detection and removal of these contaminants from water resources. In this study, we report a microporous 8-connected Zr⁴⁺ metal-organic framework (MOF) based on a terephthalate ligand decorated with a chelating 2-picolylamine side group (dMOR-2), which shows highly efficient fluorescence sensing and sorption of heavy metal cations. We demonstrate by detailed fluorescence studies the ability of a water-dispersible composite of dMOR-2 with polyvinylpyrrolidone for real-time detection of Cu²⁺, Pb²⁺, and Hg²⁺ in aqueous media. The limits of detection were found to be below 2 ppb for these species, while the system's performance is not affected by the presence of other potentially competitive ions. In addition, sorption studies showed that a composite of dMOR-2 with calcium alginate (dMOR-2@CaA) is an excellent sorbent for Pb²⁺ and Cu²⁺ ions with capacities of 376 ± 15 and 117 ± 4 mg per gram of dMOR-2@CaA, respectively, while displaying the capability for simultaneous removal of various heavy metal ions in low initial concentrations and in the presence of large excesses of other cationic species. Structural and spectroscopic studies with model ligands analogous to our material's receptor unit showed chelation to the 2-picolylamine moiety to be the main binding mode of metal ions to dMOR-2. Overall, dMOR-2 is shown to represent a rare example of a MOF, which combines sensitive fluorescence detection and high sorption capacity for heavy metal ions.

Recent Advances in the Application and Mechanism of Carbon Dots/Metal-Organic Frameworks Hybrids in Photocatalysis and the Detection of Environmental Pollutants

Metal-organic frameworks (MOFs) are a class of crystalline porous materials with simple synthesis conditions, large specific surface area, structural diversity, and a wide range of interesting properties. The integration of MOFs with other materials can provide new multifunctional composites that exhibit both component properties and new characteristics. In recent years, the integration of carbon dots (CDs) into MOFs to form composites has shown improved optical properties and fascinating new characteristics. This review focuses on the design and synthesis strategies of CDs@MOFs composites (including pore-confined synthesis, in situ encapsulation, post-synthesis modification and impregnation method) and their recent research progress in photocatalysis and detection of environmental pollutants. Both the achievements and problems are evaluated and proposed, and the opportunities and challenges of CDs@MOF composite are discussed.

A ratiometric sensor for selective detection of Hg2+ ions by combining second-order scattering and fluorescence signals of MIL-68(In)-NH2

Ratio fluorescence has attracted much attention because of its self-calibration properties. However, it is difficult to obtain suitable fluorescent materials with well-resolved signals simultaneously under one excitation. In this work, we report a different strategy, using MIL-68(In)-NH₂ as both the fluorescence element and the scattered light unit, and coupling the fluorescence and the scattered light to construct the fluorescence and scattered light ratio system. Based on the optical properties and the second-order scattering (SOS) of the material nanoparticles, the synthesized MIL-68(In)-NH₂ can be used to realize the ratio detection of Hg²⁺. Because the scattering intensity of small particle MIL-68(In)-NH₂ is weak, SOS is not obvious. When Hg²⁺ is introduced the coordination reaction between the amino nitrogen atoms of MIL-68(In)-NH₂ and Hg²⁺ make the particles larger, resulting in the decrease of fluorescence and the enhancement of SOS. As a result, a novel Hg²⁺ ratiometric detection method is developed by using the dual signal responses of the fluorescence and scattering. Under the optimal conditions (pH = 6, reaction time 5 min, room temperature, and the maximum excitation wavelength 365 nm), the linear range of the method is 0-100 μM, and the detection limit is 5.8 nM (Ksv = 9.89 × 10⁹ M^-1). In addition, the probe is successfully used to evaluate Hg²⁺ in actual water samples. Compared with the traditional method of recording only the fluorescence signal, the proposed fluorescence-scattering method provides a new strategy for the design of ratiometric sensors.

Recent Trends and Future Perspectives of Emergent Analytical Techniques for Mercury Sensing in Aquatic Environments

Environmental emissions of mercury from industrial waste and natural sources, even in trace amounts, are toxic to organisms and ecosystems. However, industrial-scale mercury detection is limited by the high cost, low sensitivity/specificity, and poor selectivity of the available analytical tools. This review summarizes the key sensors for mercury detection in aqueous environments: colorimetric-, electrochemical-, fluorescence-, and surface-enhanced Raman spectroscopy-based sensors reported between 2014-2021. It then compares the performances of these sensors in the determination of inorganic mercury (Hg²⁺ ) and methyl mercury (CH₃ Hg⁺ ) species in aqueous samples. Mercury sensors for aquatic applications still face serious challenges in terms of difficult deployment in remote areas and low robustness, reliability, and selectivity in harsh environments. We provide future perspectives on the selective detection of organomercury species, which are especially toxic and reactive in aquatic environments. This review is intended as a valuable resource for scientists in the field of mercury sensing.

Tb3+ luminescence cholate hydrogel-based multi-functionalized platform for Hg2+ and NO2 detection

In this paper, Tb3+ luminescence cholate hydrogel (Tb3+/hydrogel) was selected as a multi-functionalized platform, and PS-BD@Tb3+/hydrogel or PS-BS@Tb3+/hydrogel systems were fabricated respectively for selective detecting of Hg2+ in water and...

Recent advances in luminescent metal-organic frameworks and their photonic applications

In recent years, metal-organic frameworks (MOFs) have been attracting ever more interest owing to their fascinating structures and widespread applications. Among the optoelectronic materials, luminescent MOFs (LMOFs) have become one of the most attractive candidates in the fields of optics and photonics thanks to the unique characteristics of their frameworks. Luminescence from MOFs can originate from either the frameworks, mainly including organic linkers and metal ions, or the encapsulated guests, such as dyes, perovskites, and carbon dots. Here, we systematically review the recent progress in LMOFs, with an emphasis on the relationships between their structures and emission behaviour. On this basis, we comprehensively discuss the research progress and applications of multicolour emission from homogeneous and heterogeneous structures, host-guest hybrid lasers, and pure MOF lasers based on optically excited LMOFs in the field of micro/nanophotonics. We also highlight recent developments in other types of luminescence, such as electroluminescence and chemiluminescence, from LMOFs. Future perspectives and challenges for LMOFs are provided to give an outlook of this emerging field. We anticipate that this article will promote the development of MOF-based functional materials with desired performance towards robust optoelectronic applications.

Green synthesis of orange emissive carbon dots for the detection of Ag+and their application via solid-phase sensing and security ink

Fluorescent carbon dots (CDs) have attracted considerable interest due to their superior optical properties and facile preparation. In this work, O-phenylenediamine and melamine were used as precursors for the one-step hydrothermal synthesis of novel orange emissive CDs (O-CDs) in an aqueous solution. The fluorescence intensity (580 nm) of the O-CDs exhibited a good linear relationship with Ag⁺in the range of 0.0-50.0μM with the detection limit of 0.289μM. Moreover, the O-CDs were successfully used to determine Ag⁺in biological samples (Hela cells) because of their low cytotoxicity, and good biocompatibility. Besides, the O-CDs-doped solid-phase detection materials (test paper and hydrogel) were employed to monitor Ag⁺qualitatively and quantitatively, indicated that the O-CDs had a great capacity for the detection of Ag⁺in biological and environmental areas. Based on their extraordinary fluorescence property, the O-CDs could also be used as security ink. Overall, based on their excellent fluorescent performance, the CDs in this study have significant potential for practical application toward solid-phase sensing and security ink.

Ratiometric fluorescent probe for the on-site monitoring of coexisted Hg2+ and F- in sequence

The monitoring of mercury and fluoride ions (Hg²⁺ and F^-) has aroused wide concerns owing to the high toxicity of Hg²⁺ and the duplicitous nature of F^- to human health. As far as we known, more than 100 million people in poverty-stricken areas are still at high risk of being over-exposed to Hg²⁺ and F^- via drinking water. Simple and cost-effective luminescent methods are highly promising for on-site water monitoring in rural areas. However, the development of multipurpose luminescent probes that are accurate and sensitive remains challenging. Herein, a new strategy for rationally designing a multipurpose ratiometric probe is present. The obtained probe is consisted of two emission units with energy transfer between them, which exhibit high coordination affinities to the two coexisted toxic targets (Hg²⁺ and F^-), respectively. Thus, two distinct routes for efficiently modulating the energy transfer in the probe are present to trigger the responses to the two targets in sequence. By detecting the shift of the emission color with a smartphone, an on-site water monitoring method is successfully established with the detection limits as low as 2.7 nM for Hg²⁺ and 1.9 μM for F^-. The present study can expend the toolbox for water monitoring in rural regions.

Nanomolar determination of nitrofurans in water via excited-state inter-ligand proton transfer

Qualification and quantification of trace organic contaminants necessitates development of highly efficient sensing system, where excited-state inter-ligand proton transfer (ESILPT) provides a feasible pathway to construct efficient chemo-sensors. Herein, a strategically synthesized lanthanide complex, Eu(DBM)₃(MeOH)₃ (briefly as Eu-DBM-MeOH; DBM = dibenzoylmethane), features two-step ESILPT processes, along with modification on molecular structure and energy band. As a result, Eu-DBM-MeOH exhibits excellent photophysical properties with characteristic luminescence of Eu³⁺ ion. Benefiting from these merits, the Eu-DBM-MeOH complex acts as ultra-sensitive chemo-sensor toward nanomolar-level nitrofuran antibiotics (nitrofurazone and nitrofurantoin) in water, by disrupting ESILPT processes. Combining the advantages on photophysical property and luminescent sensitivity, ESILPT-active compounds are expected to widen and deepen the research on complex-based luminophores, being potentially useful in trace detection and biological imaging.

A sensitive turn-off-on fluorometric sensor based on S,N co-doped carbon dots for environmental analysis of Hg(II) ion

A simple and sensitive fluorescence turn-off-on sensor was established by means of S,N co-doped carbon dots (S,N-CDs) and Ag nanoparticles (AgNPs) for the determination of Hg²⁺ . For this purpose, blue emissive S,N-CDs were hydrothermally synthesized and characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, and energy dispersive X-ray spectroscopy. We observed that the fluorescence intensity of the as-prepared S,N-CDs was impressively quenched by AgNPs. The quenching mechanism was studied and attributed to nanosurface energy transfer and the inner filter effect between S,N-CDs and AgNPs. Furthermore, by adding Hg²⁺ , the fluorescence intensity of S,N-CDs/AgNPs was restored as a result of aggregation of AgNPs in the presence of Hg²⁺ . Based on these facts, S,N-CDs and AgNPs were exploited to design a sensitive turn-off-on sensor for analysis of Hg²⁺ . The recovered fluorescence signal was proportional to the concentration of Hg²⁺ in the range 1.5-2000 nM with a detection limit of 0.51 nM. The established sensor was used with satisfactory results for measurement of Hg²⁺ in environmental water samples.

Cation exchange in a fluorescent zinc-based metal–organic framework for cadmium ion detection

A Zn metal–organic framework with a large aperture shows remarkable fluorescence characteristics for the detection of cadmium ions in aqueous solution and can adsorb CO2 and O2 selectively.