Colorimetric detection of Cr6+ ions based on surface plasma resonance using the catalytic etching of gold nano-double cone @ silver nanorods

Construction of carbon dot-embedded fluorescent hydrogels based on oxidized gum arabic-gelatin Schiff base for Cr(VI) detection applications

In this study, a novel nitrogen-doped carbon quantum dot/oxidized gum arabic-gelatin-based fluorescent probe (NAH) was prepared using gelatin (GL) and gum arabic (AG) biomolecules. The primary network structure of this hydrogel consisted of polyacrylamide (PAM), while a secondary network structure was constructed between oxidized gum arabic and gelatin through the reaction of the Schiff base, which significantly enhanced the mechanical properties, the stress and strain of NAH reached 266.47 KPa and 2175.75 %. Nitrogen-doped carbon dots (NCDs) with yellow fluorescence emission properties were synthesized by hydrothermal method using salicylic acid as the carbon source and o-phenylenediamine as the nitrogen source. The fluorescent sensor obtained by compounding NCDs with hydrogel was able to selectively detect Cr(VI). The linear range of its detection was 0-90 μM, and the detection limit was 0.19 μM. The maximum theoretical adsorption capacity of the NAH hydrogel was 169.4 mg/g, and its adsorption isotherm conformed to the Langmuir adsorption isotherm model, and the adsorption kinetics conformed to the quasi-secondary kinetic model. Compared with the NCDs solution, the NAH hydrogel showed superior comprehensive performance, especially in solving the problem of recovery of NCDs. Meanwhile, this hydrogel provides an effective insight into the efficient detection and adsorption of environmental pollutants.

Nanozyme as detector and remediator to environmental pollutants: between current situation and future prospective

The term "nanozyme" refers to a nanomaterial possessing enzymatic capabilities, and in recent years, the field of nanozymes has experienced rapid advancement. Nanozymes offer distinct advantages over natural enzymes, including ease of production, cost-effectiveness, prolonged storage capabilities, and exceptional environmental stability. In this review, we provide a concise overview of various common applications of nanozymes, encompassing the detection and removal of pollutants such as pathogens, toxic ions, pesticides, phenols, organic contaminants, air pollution, and antibiotic residues. Furthermore, our focus is directed towards the potential challenges and future developments within the realm of nanozymes. The burgeoning applications of nanozymes in bioscience and technology have kindled significant interest in research in this domain, and it is anticipated that nanozymes will soon become a topic of explosive discussion.

Optical nanosensors based on noble metal nanoclusters for detecting food contaminants: A review

Food contaminants present a significant threat to public health. In response to escalating global concerns regarding food safety, there is a growing demand for straightforward, rapid, and sensitive detection technologies. Noble metal nanoclusters (NMNCs) have garnered considerable attention due to their superior attributes compared to other optical materials. These attributes include high catalytic activity, excellent biocompatibility, and outstanding photoluminescence properties. These features render NMNCs promising candidates for crafting nanosensors for food contaminant detection, offering the potential for the development of uncomplicated, swift, sensitive, user-friendly, and cost-effective detection approaches. This review investigates optical nanosensors based on NMNCs, including the synthesis methodologies of NMNCs, sensing strategies, and their applications in detecting food contaminants. Furthermore, it involves a comparative assessment of the applications of NMNCs in optical sensing and their performance. Ultimately, this paper imparts fresh perspectives on the forthcoming challenges. Hitherto, optical (particularly fluorescent) nanosensors founded on NMNCs have demonstrated exceptional sensing capabilities in the realm of food contaminant detection. To enhance sensing performance, future research should prioritize atomically precise NMNCs synthesis, augmentation of catalytic activity and optical properties, development of high-throughput and multimode sensing, integration of NMNCs with microfluidic devices, and the optimization of NMNCs storage, shelf life, and transportation conditions.

Surface plasmonic biosensors: principles, designs and applications

Recently, surface plasmon resonance (SPR) biosensors have been widely used in environmental monitoring, food contamination detection and diagnosing medical conditions due to their superior sensitivity, label-free detection and rapid analysis speed. This paper briefly elaborates on the development history of SPR technology and introduces SPR signal sensing principles. A summary of recent applications of SPR sensors in different fields is highlighted, including their figures of merit and limitations. Finally, the personal perspectives and future development trends about sensor preparation and design are discussed in detail, which may be critical for improving the performance of SPR sensors.

Using Multistage Energy Barrier of Heterojunctions in Improving Cr(VI) Detection

Detecting heavy metals in seawater is challenging due to the high salinity and complex composition, which cause strong interference. To address this issue, we propose using a multistage energy barrier as an electrochemical driver to generate electrochemical responses that can resist interference. The Ni-based heterojunction foams with different types of barriers were fabricated to detect Cr(VI), and the effects of the energy barriers on the electrochemical response were studied. The single-stage barrier can effectively drive the electrochemical response, and the multistage barrier is even more powerful in improving sensing performance. A prototype Ni/NiO/CeO2/Au/PANI foam with multistage barriers achieved a high sensitivity and recovery rate (93.63-104.79%) in detecting seawater while resisting interference. The use of multistage barriers as a driver to resist electrochemical interference is a promising approach.

Colorimetric sensor based on biogenic nanomaterials for high sensitive detection of hydrogen peroxide and multi-metals

Hydrogen peroxide (H2O2) and heavy metals, which are among the wastes of the industrial sector, become a threat to living things and the environment above certain concentrations. Therefore, the detection of both H2O2 and heavy metals with simple, low-cost, and fast analytical methods has gained great importance. The use of nanoparticles in colorimetric sensor technology for the detection of these analytes provides great advantages. In recent years, green synthesis of nanomaterials with products that can be considered biowaste is among the popular topics. In this study, silver/silver chloride nanoparticles (Ag@AgCl NPs) were synthesized using the green synthesis method as an eco-friendly and cheap method, the green algae extract was used as a reducing agent. The characterization of Ag@AgCl nanoparticles and green algae extract was carried out with several techniques such as Transmission Electron Microscopy (TEM), UV-Visible spectrometry (UV-Vis), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction patterns (XRD) methods were used for characterization. According to TEM analysis, the Ag@AgCl NPs typically spherical in form and range in size from 4 to 10 nm, and UV-vis showed the formation of surface plasmon resonance (SPR) of the Ag@AgCl between 400 and 450 nm. In addition, its activity as a colorimetric sensor for hydrogen peroxide (H2O2) and multi-metal detection was evaluated. Interestingly, Ag/AgCl NPs caused different color formations for 3 metals simultaneously in the sensor study for heavy metal detection, and Fe3+, Cu2+, and Cr6+ ions were detected. The R2 values for H2O2, Fe3+, Cu2+, and Cr6+ were 0.9360, 0.9961, 0.9787, and 0.9625 the limit of detection (LOD) was 43.75, 1.69, 3.18, and 5.05 ppb (ng/mL), respectively. It was determined that Ag@AgCl NPs have the potential to be used as a colorimetric sensor for the detection of H2O2 and heavy metals from wastewater.

Colorimetric sensor for Cr (VI) by oxidative etching of gold nanotetrapods at room temperature

Hexavalent chromium (Cr(VI)) is highly carcinogenic and mutagenic, which is seriously harmful to human health. Hence, it is important to create a probe that can detect Cr(VI) effectively. In this work, gold nanotetrapods (Au NTPs) were applied in colorimetric detection for the first time. Based on the oxidative etching principle of Cr(VI) on Au NTPs, a sensitive and multicolor response detection method for Cr(VI) was established. The oxidative etching of Au NTPs by Cr(VI) resulted in the blue shift of plasmon resonance absorption peak of Au NTPs with the change of morphology. As the etching progress processed, Au NTPs solution exhibited obvious color changes from gray-green to blue-violet and then to pink. This multicolor response design is very convenient for naked-eye detection. The limit of detection (LOD) of Cr(VI) is 3 nM for the naked eyes and 0.5 nM for UV-vis spectrum, both of which are lower than the toxicity level of Cr(VI) (0.2 μM) set by United States Environmental Protection Agency. This sensing method exhibits good linearity between the wavelength shift and Cr(VI) concentration in the range of 0.5 nM to 8 nM. The detection results of Cr(VI) in actual environmental samples demonstrate that the Au NTPs colorimetric probe (Au-N-Probe) is expected to be applied to the detection of Cr(VI) in water environmental samples such as lake water and industrial wastewater.

Floral waste synthesized silver nanoparticles as sensor for Cr (VI) ion detection

The presence of heavy metal ions, particularly Cr (VI) in water, is a serious environmental concern. There is a need to develop low-cost and efficient methods for sensing and removing Cr (IV) ions selectively. In this paper, floral waste (FW) extract is used for the synthesis of Ag NPs for sensing Cr (VI) ions in an aqueous solution. Silver nanoparticles (Ag-NPs) were characterized using spectroscopic (UV-visible and FTIR), X-ray diffraction, TEM, and SEM techniques. UV-visible spectroscopic studies revealed that in the presence of Cr (VI) ions, there is an abrupt change in the λ_max value of Ag NPs in aqueous solution, indicating that the synthesized Ag-NP is an excellent sensor for the spectroscopical detection of Cr (VI) ions with a low detection limit of 0.5 ppm. The method is fast, economical, simple, and efficient.

Gold Nanoparticles as Exquisite Colorimetric Transducers for Water Pollutant Detection

Gold nanoparticles (AuNPs) are useful nanomaterials as transducers for colorimetric sensors because of their high extinction coefficient and ability to change color depending on aggregation status. Therefore, over the past few decades, AuNP-based colorimetric sensors have been widely applied in several environmental and biological applications, including the detection of water pollutants. According to various studies, water pollutants are classified into heavy metals or cationic metal ions, toxins, and pesticides. Notably, many researchers have been interested in AuNP that detect water pollutants with high sensitivity and selectivity, while offering no adverse environmental issues in terms of AuNP use. This review provides a representative overview of AuNP-based colorimetric sensors for detecting several water pollutants. In particular, we emphasize the advantages of AuNP as colorimetric transducers for water pollutant detection in terms of their low toxicity, high stability, facile processability, and unique optical properties. Next, we discuss the status quo and future prospects of AuNP-based colorimetric sensors for the detection of water pollutants. We believe that this review will promote research and development of AuNP as next-generation colorimetric transducers for water pollutant detection.

Colorimetric detection of heavy metal ions with various chromogenic materials: Strategies and applications

Detection of heavy metal ions has drawn significant attention in environmental and food area due to their threats to the human health and ecosystem. Colorimetry is one of the most frequently-used methods for the detection of heavy metal ions owing to its simplicity, easy operation and rapid on-site detection. The development of chromogenic materials and their sensing mechanisms are the key research direction in the area of colorimetric method. Since each chromogenic material has their unique optical and chemical properties, they have totally different colorimetric sensing mechanisms. This review focuses on the chromogenic materials and their sensing strategies for the colorimetric detection of heavy metal ions. We divide the chromogenic materials into three types, including organic materials, inorganic materials, and other materials. As for each type of chromogenic material, we discuss their detailed sensing strategies, sensing performance, and real sample applications. Moreover, current challenges and perspectives related to the colorimetry of heavy metal ions are also discussed in this review. The aim of this review is to help readers to better understand the principles of colorimetric methods for heavy metal ions and push the development of rapid detection of heavy metal ions.

Raspberry-Like Gold Nanoparticles Based On Nanoclusters Anchored on Cyclodextrin-Functionalized Nanoparticles: Synthesis and Ultrasensitive Electrochemical Detection of Chromium(VI) Ions

A facile synthetic strategy is devised to construct raspberry like gold nanoparticles (RbNPs) formed by gold nanoclusters wrapped around β-cyclodextrin functionalized gold nanoparticles (CD-AuNPs@AuNCs). An efficient and sensitive electrochemical sensor for the detection of Cr(VI) has been developed based on RbNPs. The sensing platform exhibits an excellent wide linear range (100 pg mL^-1 to 10 μg mL^-1 ), extremely low detection limit (40.91 fg mL^-1 i. e. 0.79 pM), which may pave a new way to fabricate other ultrasensitive electrochemical sensors based on the designed RbNPs.

A paper-based visualization chip based on nitrogen-doped carbon quantum dots nanoprobe for Hg(Ⅱ) detection

Hg(II) is one of the most toxic heavy metal ions. The bioconcentration and degradation-resistant of Hg(II) bring about serious harm to the ecosystem and humans. Therefore, the establishment of an accurate and effective method for detecting mercury ions is of great significance to environmental protection, food safety and human health. In this work, a new fluorescent nanoprobe was presented using nitrogen-doped carbon quantum dots (N-CQDs) for Hg(II) sensing with high stability and selectivity. On this basis, a paper-based chip was innovatively developed for visualization detection of Hg(II). The N-CQDs were prepared through a one-step hydrothermal reaction using catechol and ethylenediamine as carbon and nitrogen sources, respectively. As-prepared N-CQDs exhibit the strong green fluorescence at the excitation/emission wavelength of 370/511 nm. In aqueous solution, a rapid and highly sensitive detection method of Hg(II) was established by the joint of dynamic and static quenching effect of Hg(II) on N-CQDs fluorescence. Under the optimized conditions, there was a stable correlation between the fluorescence intensity change of N-CQDs and the concentrations of Hg(II) in the range of 15 ∼ 10⁴ nM, and the detection limit was down to 8 nM (S/N = 3). The recoveries of water, sorghum and rice were 91.60 to 102.46%, which was consistent with ICP-MS. More importantly, the N-CQDs nanoprobe was further integrated in nitrocellulose membrane to develop paper-based chip for Hg(II) visualization detection, and the detection performance was also excellent. This strategy had significant implications for achieving low-cost, on-site real-time monitoring of mercury (II) in the environment and food.

Gold and Silver Nanoparticle-Based Colorimetric Sensors: New Trends and Applications

Gold and Silver nanoparticles (AuNPs and AgNPs) are perfect platforms for developing sensing colorimetric devices thanks to their high surface to volume ratio and distinctive optical properties, particularly sensitive to changes in the surrounding environment. These characteristics ensure high sensitivity in colorimetric devices. Au and Ag nanoparticles can be capped with suitable molecules that can act as specific analyte receptors, so highly selective sensors can be obtained. This review aims to highlight the principal strategies developed during the last decade concerning the preparation of Au and Ag nanoparticle-based colorimetric sensors, with particular attention to environmental and health monitoring applications.