Suitability of the MinION long read sequencer for semi-targeted detection of foodborne pathogens

Exploring sub-species variation in food microbiomes: a roadmap to reveal hidden diversity and functional potential

Within-species diversity of microorganisms in food systems significantly shapes community function. While next-generation sequencing (NGS) methods have advanced our understanding of microbiomes at the community level, it is essential to recognize the importance of within-species variation for understanding and predicting the functional activities of these communities. This review highlights the substantial variation observed among microbial species in food systems and its implications for their functionality. We discuss a selection of key species in fermented foods and food systems, highlighting examples of strain-level variation and its influence on quality and safety. We present a comprehensive roadmap of methodologies aimed at uncovering this often overlooked underlying diversity. Technologies like long-read marker-gene or shotgun metagenome sequencing offer enhanced resolution of microbial communities and insights into the functional potential of individual strains and should be integrated with techniques such as metabolomics, metatranscriptomics, and metaproteomics to link strain-level microbial community structure to functional activities. Furthermore, the interactions between viruses and microbes that contribute to strain diversity and community stability are also critical to consider. This article highlights existing research and emphasizes the importance of incorporating within-species diversity in microbial community studies to harness their full potential, advance fundamental science, and foster innovation.

Application of MinION Long-Read Sequencer for Semi-targeted Detection of Foodborne Pathogens

Foodborne pathogens remain a serious health issue in developed and developing countries. Safeness of food products has been assured for years with culture-based microbiological methods; however, these present several limitations such as turnaround time and extensive hands-on work, which have been typically address taking advantage of DNA-based methods such as real-time PCR (qPCR). These, and other similar techniques, are targeted assays, meaning that they are directed for the specific detection of one specific microbe. Even though reliable, this approach suffers from an important limitation that unless specific assays are design for every single pathogen potentially present, foods may be considered erroneously safe. To address this problem, next-generation sequencing (NGS) can be used as this is a nontargeted method; thus it has the capacity to detect every potential threat present. In this chapter, a protocol for the simultaneous detection and preliminary serotyping of Salmonella enterica serovar Enteritidis, Salmonella enterica serovar Typhimurium, Listeria monocytogenes, and Escherichia coli O157:H7 is described.

Surface monitoring of L. monocytogenes by real-time fluorescence and colorimetric LAMP

Listeria monocytogenes is a major foodborne pathogen affecting developing, and developed countries. The analysis of food contact surfaces in food industries is key for better controlling this pathogen. The current study focused on the development, optimization, and evaluation of a rapid and simple method for the detection of L. monocytogenes on stainless steel surfaces, suitable for decentralized setups, taking advantage of Loop-mediated isothermal amplification (LAMP). This was accomplished using a general pre-enrichment broth (TSB), with a simple DNA extraction based on a chelating resin, and final isothermal amplification. Two different detection strategies were tested, real-time fluorescence and naked-eye colorimetric, which were evaluated after 5, 7, and 24 h of pre-enrichment. Regardless the detection chemistry selected, after 5-7 h of pre-enrichment, 103-104 CFU/cm2 were needed to obtain a positive result, while after 24 h, it was possible to detect concentrations below 10 CFU/cm2. Within each given time, all the performance parameters calculated, relative sensitivity, specificity, and accuracy, reached values higher than 80-90%; likewise, a Cohen's k of concordance with a culture-based approach higher than 0.8. Overall, the most sensitive assay can be performed in roughly 25 h. This time-to-result outperforms commercial kits with the added value of specifically detecting L. monocytogenes instead of Listeria spp. KEY POINTS: • Real-time fluorescence and naked-eye colorimetric, were compared for the novel assay. • An LOD50 of 3.4 CFU/cm2 and 4.2 CFU/cm2 was calculated for the two assays. • Three pre-enrichment times were compared providing 24 h better results.

Investigating the Quantification Capabilities of a Nanopore-Based Sequencing Platform for Food Safety Application via External Standards of Lambda DNA and Lambda Spiked Beef

Six hundred million cases of disease and roughly 420,000 deaths occur globally each year due to foodborne pathogens. Current methods to screen and identify pathogens in swine, poultry, and cattle products include immuno-based techniques (e.g., immunoassay integrated biosensors), molecular methods (e.g., DNA hybridization and PCR assays), and traditional culturing. These methods are often used in tandem to screen, quantify, and characterize samples, prolonging real-time comprehensive analysis. Next-generation sequencing (NGS) is a relatively new technology that combines DNA-sequencing chemistry and bioinformatics to generate and analyze large amounts of short- or long-read DNA sequences and whole genomes. The goal of this project was to evaluate the quantitative capabilities of the real-time NGS Oxford Nanopore Technologies' MinION sequencer through a shotgun-based sequencing approach. This investigation explored the correlation between known amounts of the analyte (lambda DNA as a pathogenic bacterial surrogate) with data output, in both the presence and absence of a background matrix (Bos taurus DNA). A positive linear correlation was observed between the concentration of analyte and the amount of data produced, number of bases sequenced, and number of reads generated in both the presence and absence of a background matrix. In the presence of bovine DNA, the sequenced data were successfully mapped to the NCBI lambda reference genome. Furthermore, the workflow from pre-extracted DNA to target identification took less than 3 h, demonstrating the potential of long-read sequencing in food safety as a rapid method for screening, identification, and quantification.

Phage amplification coupled with loop-mediated isothermal amplification (PA-LAMP) for same-day detection of viable Salmonella Enteritidis in raw poultry meat

Salmonella Enteritidis is the main serotype responsible for human salmonellosis in the European Union. One of the main sources of Salmonella spp. in the food chain are poultry products, such as eggs or chicken meat. In recent years, molecular methods have become an alternative to culture dependent methods for the rapid screening of Salmonella spp. In this work, the strain S. Enteritidis S1400, and previously isolated and characterized bacteriophage PVP-SE2, were used to develop and evaluate a same-day detection method combining Phage Amplification and Loop-mediated isothermal amplification (PA-LAMP) to specifically detect viable S. Enteritidis in chicken breast. This method is based on the detection of the phage DNA rather than bacterial DNA. The virus is added to the sample during pre-enrichment in buffered peptone water, where it replicates in the presence of viable S. Enteritidis. The detection of phage DNA allows, on the one hand to detect viable bacteria, since viruses only replicate in them, and on the other hand to increase the sensitivity of the method since for each infected S. Enteritidis cell, hundreds of new viruses are produced. Two different PA-LAMP detection strategies were evaluated, a real time fluorescence and a naked-eye detection. The present method could down to 0.2 fg/μL of pure phage DNA and a concentration of viral particles of 2.2 log PFU/mL. After a short Salmonella recovery step of 3 h and a co-culture of 4 h of the samples with phage particles, both real-time fluorescence and naked-eye method showed a LoD95 of 6.6 CFU/25 g and a LoD50 of 1.5/25 g in spiked chicken breast samples. The entire detection process, including DNA extraction and LAMP analysis, can be completed in around 8 h. In the current proof-of-concept, the novel PA-LAMP obtained comparable results to those of the reference method ISO 6579, to detect Salmonella Enteritidis in poultry meat.

A culture-, amplification-independent, and rapid method for identification of pathogens and antibiotic resistance profile in bovine mastitis milk

Introduction

Rapid and accurate diagnosis of causative pathogens in mastitis would minimize the imprudent use of antibiotics and, therefore, reduce the spread of antimicrobial resistance. Whole genome sequencing offers a unique opportunity to study the microbial community and antimicrobial resistance (AMR) in mastitis. However, the complexity of milk samples and the presence of a high amount of host DNA in milk from infected udders often make this very challenging.

Methods

Here, we tested 24 bovine milk samples (18 mastitis and six non-mastitis) using four different commercial kits (Qiagens' DNeasy^® PowerFood^® Microbial, Norgens' Milk Bacterial DNA Isolation, and Molzyms' MolYsis™ Plus and Complete5) in combination with filtration, low-speed centrifugation, nuclease, and 10% bile extract of male bovine (Ox bile). Isolated DNA was quantified, checked for the presence/absence of host and pathogen using PCR and sequenced using MinION nanopore sequencing. Bioinformatics analysis was performed for taxonomic classification and antimicrobial resistance gene detection.

Results

The results showed that kits designed explicitly for bacterial DNA isolation from food and dairy matrices could not deplete/minimize host DNA. Following using MolYsis™ Complete 5 + 10% Ox bile + micrococcal nuclease combination, on average, 17% and 66.5% of reads were classified as bovine and Staphylococcus aureus reads, respectively. This combination also effectively enriched other mastitis pathogens, including Escherichia coli and Streptococcus dysgalactiae. Furthermore, using this approach, we identified important AMR genes such as Tet (A), Tet (38), fosB-Saur, and blaZ. We showed that even 40 min of the MinION run was enough for bacterial identification and detecting the first AMR gene.

Conclusion

We implemented an effective method (sensitivity of 100% and specificity of 92.3%) for host DNA removal and bacterial DNA enrichment (both gram-negative and positive) directly from bovine mastitis milk. To the best of our knowledge, this is the first culture- and amplification-independent study using nanopore-based metagenomic sequencing for real-time detection of the pathogen (within 5 hours) and the AMR profile (within 5-9 hours), in mastitis milk samples. These results provide a promising and potential future on-farm adaptable approach for better clinical management of mastitis.

Rapid Proteomic Characterization of Bacteriocin-Producing Enterococcus faecium Strains from Foodstuffs

Enterococcus belongs to a group of microorganisms known as lactic acid bacteria (LAB), which constitute a broad heterogeneous group of generally food-grade microorganisms historically used in food preservation. Enterococci live as commensals of the gastrointestinal tract of warm-blooded animals, although they also are present in food of animal origin (milk, cheese, fermented sausages), vegetables, and plant materials because of their ability to survive heat treatments and adverse environmental conditions. The biotechnological traits of enterococci can be applied in the food industry; however, the emergence of enterococci as a cause of nosocomial infections makes their food status uncertain. Recent advances in high-throughput sequencing allow the subtyping of bacterial pathogens, but it cannot reflect the temporal dynamics and functional activities of microbiomes or bacterial isolates. Moreover, genetic analysis is based on sequence homologies, inferring functions from databases. Here, we used an end-to-end proteomic workflow to rapidly characterize two bacteriocin-producing Enterococcus faecium (Efm) strains. The proteome analysis was performed with liquid chromatography coupled to a trapped ion mobility spectrometry-time-of-flight mass spectrometry instrument (TimsTOF) for high-throughput and high-resolution characterization of bacterial proteins. Thus, we identified almost half of the proteins predicted in the bacterial genomes (>1100 unique proteins per isolate), including quantifying proteins conferring resistance to antibiotics, heavy metals, virulence factors, and bacteriocins. The obtained proteomes were annotated according to function, resulting in 22 complete KEGG metabolic pathway modules for both strains. The workflow used here successfully characterized these bacterial isolates and showed great promise for determining and optimizing the bioengineering and biotechnology properties of other LAB strains in the food industry.

A step forward for Shiga toxin-producing Escherichia coli identification and characterization in raw milk using long-read metagenomics

Shiga toxin-producing Escherichia coli (STEC) are a cause of severe human illness and are frequently associated with haemolytic uraemic syndrome (HUS) in children. It remains difficult to identify virulence factors for STEC that absolutely predict the potential to cause human disease. In addition to the Shiga-toxin (stx genes), many additional factors have been reported, such as intimin (eae gene), which is clearly an aggravating factor for developing HUS. Current STEC detection methods classically rely on real-time PCR (qPCR) to detect the presence of the key virulence markers (stx and eae). Although qPCR gives an insight into the presence of these virulence markers, it is not appropriate for confirming their presence in the same strain. Therefore, isolation steps are necessary to confirm STEC viability and characterize STEC genomes. While STEC isolation is laborious and time-consuming, metagenomics has the potential to accelerate the STEC characterization process in an isolation-free manner. Recently, short-read sequencing metagenomics have been applied for this purpose, but assembly quality and contiguity suffer from the high proportion of mobile genetic elements occurring in STEC strains. To circumvent this problem, we used long-read sequencing metagenomics for identifying eae-positive STEC strains using raw cow's milk as a causative matrix for STEC food-borne outbreaks. By comparing enrichment conditions, optimizing library preparation for MinION sequencing and generating an easy-to-use STEC characterization pipeline, the direct identification of an eae-positive STEC strain was successful after enrichment of artificially contaminated raw cow's milk samples at a contamination level as low as 5 c.f.u. ml-1. Our newly developed method combines optimized enrichment conditions of STEC in raw milk in combination with a complete STEC analysis pipeline from long-read sequencing metagenomics data. This study shows the potential of the innovative methodology for characterizing STEC strains from complex matrices. Further developments will nonetheless be necessary for this method to be applied in STEC surveillance.

Application of MinION sequencing as a tool for the rapid detection and characterization of Listeria monocytogenes in smoked salmon

Microbial pathogens may be present in different types of foods, and hence the development of novel methods to assure consumers' safeness is of great interest. Molecular methods are known to provide sensitive and rapid results; however, they are typically targeted approaches. In recent years, the advent of non-targeted approaches based on next-generation sequencing (NGS) has emerged as a rational way to proceed. This technology allows for the detection of several pathogens simultaneously. Furthermore, with the same set of data, it is possible to characterize the microorganisms in terms of serotype, virulence, and/ or resistance genes, among other molecular features. In the current study, a novel method for the detection of Listeria monocytogenes based on the "quasimetagenomics" approach was developed. Different enrichment media and immunomagnetic separation (IMS) strategies were compared to determine the best approach in terms of L. monocytogenes sequences generated from smoked salmon samples. Finally, the data generated were analyzed with a user-friendly workflow that simultaneously provided the species identification, serotype, and antimicrobial resistance genes. The new method was thoroughly evaluated against a culture-based approach, using smoked salmon inoculated with L. monocytogenes as the matrix of choice. The sequencing method reached a very low limit of detection (LOD50, 1.2 CFU/ 25 g) along with high diagnostic sensitivity and specificity (100%), and a perfect correlation with the culture-based method (Cohen's k = 1.00). Overall, the proposed method overcomes all the major limitations reported for the implementation of NGS as a routine food testing technology and paves the way for future developments taking its advantage into consideration.

Application of Nanopore Sequencing in the Detection of Foodborne Microorganisms

Foodborne pathogens have become the subject of intense interest because of their high incidence and mortality worldwide. In the past few decades, people have developed many methods to solve this challenge. At present, methods such as traditional microbial culture methods, nucleic acid or protein-based pathogen detection methods, and whole-genome analysis are widely used in the detection of pathogenic microorganisms in food. However, these methods are limited by time-consuming, cumbersome operations or high costs. The development of nanopore sequencing technology offers the possibility to address these shortcomings. Nanopore sequencing, a third-generation technology, has the advantages of simple operation, high sensitivity, real-time sequencing, and low turnaround time. It can be widely used in the rapid detection and serotyping of foodborne pathogens. This review article discusses foodborne diseases, the principle of nanopore sequencing technology, the application of nanopore sequencing technology in foodborne pathogens detection, as well as its development prospects.