Manipulation of cellular spheroid composition and the effects on vascular tissue fusion

Bioassembly of multicellular spheroids to mimic complex tissue structure using surface-modified magnetized nanofibers

Advancements in biofabrication have led to major strides toward creating authentic organ models; however, replicating intricate organ structures without scaffolds remains challenging. In this study, we introduce a method utilizing surface-modifiable magnetic nanofibers to achieve precise control over spheroid functions and geometrical features, allowing the creation of multiple functional domains within a single microtissue. We generated magnetized nanofibers by electrospinning magnetic nanoparticles dispersed in poly-L-lactic acid solution. These fibers were then coated with polydopamine (PD) to enhance their biological functions, particularly reactive oxygen species (ROS) scavenging. These PD-coated magnetic fibers (PMFs) had magnetic-responsive properties when incorporated into human dermal fibroblast spheroids (0.019 ± 0.001 emu g-1). Furthermore, PMFs within the spheroids effectively regulated ROS levels by upregulating the expression of key anti-oxidative genes such assuperoxide dismutase-1(2.2 ± 0.1) andglutathione peroxidase-1(2.6 ± 0.1). By exploiting the magnetic responsiveness of spheroids, we were able to assemble them into various structures such as linear, triangular, and square structures using remotely applied magnetic forces. Within the assembled three-dimensional constructs, the cells in spheroids incorporating PMFs demonstrated resistance to ROS regulatory activity in the presence of hydrogen peroxide, while spheroids composed of bare fibers exhibited high ROS levels. Furthermore, we assembled spheroids containing fibroblasts and endothelial cells into complex tissue structures resembling vessels under magnetic manipulation. This innovative method holds tremendous promise for organ modeling and regenerative medicine due to the unprecedented control it allows in developing microtissues that closely emulate real organs.

Scaffolded spheroids as building blocks for bottom-up cartilage tissue engineering show enhanced bioassembly dynamics

Due to the capability of cell spheroids (SPH) to assemble into large high cell density constructs, their use as building blocks attracted a lot of attention in the field of biofabrication. Nevertheless, upon maturation, the composition along with the size of such building blocks change, affecting their fusiogenic ability to form a cohesive tissue construct of controllable size. This natural phenomenon remains a limitation for the standardization of spheroid-based therapies in the clinical setting. We recently showed that scaffolded spheroids (S-SPH) can be produced by forming spheroids directly within porous PCL-based microscaffolds fabricated using multiphoton lithography (MPL). In this new study, we compare the bioassembly potential of conventional SPHs versus S-SPHs depending on their degree of maturation. Doublets of both types of building blocks were cultured and their fusiogenicity was compared by measuring the intersphere angle, the length of the fusing spheroid pairs (referred to as doublet length) as well as their spreading behaviour. Finally, the possibility to fabricate macro-sized tissue constructs (i.e. cartilage-like) from both chondrogenic S-SPHs and SPHs was analyzed. This study revealed that, in contrast to conventional SPHs, S-SPHs exhibit robust and stable fusiogenicity, independently from their degree of maturation. In order to understand this behavior, we further analyze the intersection area of doublets, looking at the kinetic of cell migration and at the mechanical stability of the formed tissue using dissection measurements. Our findings indicate that the presence of microscaffolds enhances the ability of spheroids to be used as building blocks for bottom-up tissue engineering, which is an important advantage compared to conventional spheroid-based therapy approaches. STATEMENT OF SIGNIFICANCE: The approach of using SPHs as building blocks for bottom-up tissue engineering offers a variety of advantages. At the same time the self-assembly of large tissues remains challenging due to several intrinsic properties of SPHs, such as for instance the shrinkage of tissues assembled from SPHs, or the reduced fusiogenicity commonly observed with mature SPHs. In this work, we demonstrate the capability of scaffolded spheroids (S-SPH) to fuse and recreate cartilage-like tissue constructs despite their advanced maturation stage. In this regard, the presence of microscaffolds compensates for some of the intrinsic limitations of SPHs and can help to overcome current limitations of spheroid-based tissue engineering.

Acoustic and Magnetic Stimuli-Based Three-Dimensional Cell Culture Platform for Tissue Engineering

In a conventional two-dimensional (2D) culture method, cells are attached to the bottom of the culture dish and grow into a monolayer. These 2D culture methods are easy to handle, cost-effective, reproducible, and adaptable to growing many different types of cells. However, monolayer 2D cell culture conditions are far from those of natural tissue, indicating the need for a three-dimensional (3D) culture system. Various methods, such as hanging drop, scaffolds, hydrogels, microfluid systems, and bioreactor systems, have been utilized for 3D cell culture. Recently, external physical stimulation-based 3D cell culture platforms, such as acoustic and magnetic forces, were introduced. Acoustic waves can establish acoustic radiation force, which can induce suspended objects to gather in the pressure node region and aggregate to form clusters. Magnetic targeting consists of two components, a magnetically responsive carrier and a magnetic field gradient source. In a magnetic-based 3D cell culture platform, cells are aggregated by changing the magnetic force. Magnetic fields can manipulate cells through two different methods: positive magnetophoresis and negative magnetophoresis. Positive magnetophoresis is a way of imparting magnetic properties to cells by labeling them with magnetic nanoparticles. Negative magnetophoresis is a label-free principle-based method. 3D cell structures, such as spheroids, 3D network structures, and cell sheets, have been successfully fabricated using this acoustic and magnetic stimuli-based 3D cell culture platform. Additionally, fabricated 3D cell structures showed enhanced cell behavior, such as differentiation potential and tissue regeneration. Therefore, physical stimuli-based 3D cell culture platforms could be promising tools for tissue engineering.

Current biofabrication methods for vascular tissue engineering and an introduction to biological textiles

Cardiovascular diseases are the leading cause of mortality in the world and encompass several important pathologies, including atherosclerosis. In the cases of severe vessel occlusion, surgical intervention using bypass grafts may be required. Synthetic vascular grafts provide poor patency for small-diameter applications (< 6 mm) but are widely used for hemodialysis access and, with success, larger vessel repairs. In very small vessels, such as coronary arteries, synthetics outcomes are unacceptable, leading to the exclusive use of autologous (native) vessels despite their limited availability and, sometimes, quality. Consequently, there is a clear clinical need for a small-diameter vascular graft that can provide outcomes similar to native vessels. Many tissue-engineering approaches have been developed to offer native-like tissues with the appropriate mechanical and biological properties in order to overcome the limitations of synthetic and autologous grafts. This review overviews current scaffold-based and scaffold-free approaches developed to biofabricate tissue-engineered vascular grafts (TEVGs) with an introduction to the biological textile approaches. Indeed, these assembly methods show a reduced production time compared to processes that require long bioreactor-based maturation steps. Another advantage of the textile-inspired approaches is that they can provide better directional and regional control of the TEVG mechanical properties.

3D Bioprinted Silk-Based In Vitro Osteochondral Model for Osteoarthritis Therapeutics

3D bioprinting of osteochondral tissue offers unique opportunities for enabling precise pharmacological interventions in osteoarthritis (OA). The current study investigates the screening potential of anti-inflammatory drugs using bioprinted inflamed human osteochondral units. The biomimetic hierarchical geometry is bioprinted using silk-based bioinks encapsulating pre-differentiated stem cells, creating an in vitro model. Inflammation is stimulated in the model, using tumor necrosis factor-alpha and Interleukin-1 beta pro-inflammatory cytokines. The resultant degeneration, akin to OA, is flagged by key markers like sulfated glycosaminoglycan, collagen, alkaline phosphatase, and downregulation of osteochondral transcript levels. In the next step, the screening of anti-inflammatory drugs is validated using celecoxib and rhein. Consequently, in the inflamed constructs, the initial upregulation of the key inflammatory mediators (nitric oxide, Prostaglandin E2), is subsequently downregulated, post-drug treatment. In addition, catabolic markers (matrix metalloproteinases and aggrecanase-1), indicative of hypertrophic and apoptosing chondrocytes, are significantly downregulated in the treatment groups; while the transcript and protein levels required for osteochondral health are attenuated. Therefore, the in vitro model mimicks the inflammation in the early stages of OA, and corroborates a potential high-throughput platform for screening novel anti-inflammatory drugs in OA therapeutics.

Tools for manipulation and positioning of microtissues

Complex three-dimensional (3D) in vitro models are emerging as a key technology to support research areas in personalised medicine, such as drug development and regenerative medicine. Tools for manipulation and positioning of microtissues play a crucial role in the microtissue life cycle from production to end-point analysis. The ability to precisely locate microtissues can improve the efficiency and reliability of processes and investigations by reducing experimental time and by providing more controlled parameters. To achieve this goal, standardisation of the techniques is of primary importance. Compared to microtissue production, the field of microtissue manipulation and positioning is still in its infancy but is gaining increasing attention in the last few years. Techniques to position microtissues have been classified into four main categories: hydrodynamic techniques, bioprinting, substrate modification, and non-contact active forces. In this paper, we provide a comprehensive review of the different tools for the manipulation and positioning of microtissues that have been reported to date. The working mechanism of each technique is described, and its merits and limitations are discussed. We conclude by evaluating the potential of the different approaches to support progress in personalised medicine.

A platform for automated and label-free monitoring of morphological features and kinetics of spheroid fusion

Spheroids are widely applied as building blocks for biofabrication of living tissues, where they exhibit spontaneous fusion toward an integrated structure upon contact. Tissue fusion is a fundamental biological process, but due to a lack of automated monitoring systems, the in-depth characterization of this process is still limited. Therefore, a quantitative high-throughput platform was developed to semi-automatically select doublet candidates and automatically monitor their fusion kinetics. Spheroids with varying degrees of chondrogenic maturation (days 1, 7, 14, and 21) were produced from two different cell pools, and their fusion kinetics were analyzed via the following steps: (1) by applying a novel spheroid seeding approach, the background noise was decreased due to the removal of cell debris while a sufficient number of doublets were still generated. (2) The doublet candidates were semi-automatically selected, thereby reducing the time and effort spent on manual selection. This was achieved by automatic detection of the microwells and building a random forest classifier, obtaining average accuracies, sensitivities, and precisions ranging from 95.0% to 97.4%, from 51.5% to 92.0%, and from 66.7% to 83.9%, respectively. (3) A software tool was developed to automatically extract morphological features such as the doublet area, roundness, contact length, and intersphere angle. For all data sets, the segmentation procedure obtained average sensitivities and precisions ranging from 96.8% to 98.1% and from 97.7% to 98.8%, respectively. Moreover, the average relative errors for the doublet area and contact length ranged from 1.23% to 2.26% and from 2.30% to 4.66%, respectively, while the average absolute errors for the doublet roundness and intersphere angle ranged from 0.0083 to 0.0135 and from 10.70 to 13.44°, respectively. (4) The data of both cell pools were analyzed, and an exponential model was used to extract kinetic parameters from the time-series data of the doublet roundness. For both cell pools, the technology was able to characterize the fusion rate and quality in an automated manner and allowed us to demonstrate that an increased chondrogenic maturity was linked with a decreased fusion rate. The platform is also applicable to other spheroid types, enabling an increased understanding of tissue fusion. Finally, our approach to study spheroid fusion over time will aid in the design of controlled fabrication of “assembloids” and bottom-up biofabrication of living tissues using spheroids.

Hybrid spheroid microscaffolds as modular tissue units to build macro-tissue assemblies for tissue engineering

Since its inception, tissue engineering and regenerative medicine (TERM) has been relying on either scaffold-based or scaffold-free strategies. Recent reports outlined the possibility of a synergistic, convergence approach, referred to as the third TERM strategy, which could alleviate bottlenecks of the two previous options. This strategy requires the fabrication of highly porous microscaffolds, allowing to create single spheroids within each of them. The resulting tissue units can then be combined and used as modular building blocks for creating tissue constructs through a bottom-up self-assembly. Such strategy can have a significant impact for the future of TERM, but so far, no reports have assessed its feasibility in detail. This work reports a first systematic study, which includes a comparison of the in vitro behavior of tissue units based on adipose derived stem cell spheroids cultured within microscaffolds versus conventional spheroids. We first proved that the presence of the microscaffold neither impairs the cells 'ability to form spheroids nor impacts their viability. Importantly, the fusiogenic and the differentiation potential (i.e. chondrogenesis and osteogenesis), which are important features for cellularized building blocks to be used in TERM, are preserved when spheroids are cultured within microscaffolds. Significant benefits of microscaffold-based tissue units include the enhanced cell retention, the decreased compaction and the better control over the size observed when larger tissue constructs are formed through self-assembly. The proof of concept study presented here demonstrates the great potential offered by those microsize tissue units to be used as building blocks for directed tissue self-assembly. STATEMENT OF SIGNIFICANCE: One of the most exciting and recent advances in tissue engineering and regenerative medicine (TERM) is to combine together multiple micro-size cellularized units, which are able to self-assemble altogether to recreate larger tissue constructs. In this work, we produce such modules by forming single spheroids within highly porous microscaffolds, and study how this new microenvironment impacts on the spheroid's behavior and stemness potential. This work highlights as well that such novel route is enabled by two-photon polymerization, which is an additive manufacturing technique offering high spatial resolution down to 100 nm. These findings provide a first scientific evidence about the utilization of hybrid spheroid microscaffold-based tissue units with great perspective as a modular tool for TERM.

Magnetism-controlled assembly of composite stem cell spheroids for the biofabrication of contraction-modulatory 3D tissue

Biofabrication of organ-like engineered 3D tissue through the assembly of magnetized 3D multi-cellular spheroids has been recently investigated in tissue engineering. However, the cytotoxicity of magnetic nanoparticles (MNPs) and contraction-induced structural deformation of the constructs have been major limitations. In this study, we developed a method to fabricate composite stem cell spheroids using MNP-coated fibers, alleviating MNP-mediated toxicity and controlling structural assembly under external magnetic stimuli. The MNP-coated synthetic fibers (MSFs) were prepared by coating various amounts of MNPs on the fibers via electrostatic interactions. The MSFs showed magnetic hysteresis and no cytotoxicity on 2D-cultured adipose-derived stem cells (ADSCs). The composite spheroids containing MSFs and ADSCs were rapidly formed in which the amount of impregnated MSFs modulated the spheroid size. The fusion ofin vitrocomposite spheroids was then monitored at the contacting interface; the fused spheroids with over 10μg of MSF showed minimal contraction after 7 d, retaining around 90% of total area ratio regardless of the number of cells, indicating that the presence of fibers within the composite spheroid supported its structural maintenance. The fusion of MSF spheroids was modulated by external magnetic stimulation, and the effect of magnetic force on the movement and fusion of the spheroids was investigated using COMSOL simulation. Finally, ring and lamellar structures were successfully assembled using remote-controlled MSF spheroids, showing limited deformation and high viability up to 50 d duringin vitroculture. In addition, the MSFs demonstrated no adverse effects on ADSC osteochondral differentiation. Altogether, we envision that our magnetic assembly system would be a promising method for the tissue engineering of structurally controlled organ-like constructs.

Using Spheroids as Building Blocks Towards 3D Bioprinting of Tumor Microenvironment

Cancer still ranks as a leading cause of mortality worldwide. Although considerable efforts have been dedicated to anticancer therapeutics, progress is still slow, partially due to the absence of robust prediction models. Multicellular tumor spheroids, as a major three-dimensional (3D) culture model exhibiting features of avascular tumors, gained great popularity in pathophysiological studies and high throughput drug screening. However, limited control over cellular and structural organization is still the key challenge in achieving in vivo like tissue microenvironment. 3D bioprinting has made great strides toward tissue/organ mimicry, due to its outstanding spatial control through combining both cells and materials, scalability, and reproducibility. Prospectively, harnessing the power from both 3D bioprinting and multicellular spheroids would likely generate more faithful tumor models and advance our understanding on the mechanism of tumor progression. In this review, the emerging concept on using spheroids as a building block in 3D bioprinting for tumor modeling is illustrated. We begin by describing the context of the tumor microenvironment, followed by an introduction of various methodologies for tumor spheroid formation, with their specific merits and drawbacks. Thereafter, we present an overview of existing 3D printed tumor models using spheroids as a focus. We provide a compilation of the contemporary literature sources and summarize the overall advancements in technology and possibilities of using spheroids as building blocks in 3D printed tissue modeling, with a particular emphasis on tumor models. Future outlooks about the wonderous advancements of integrated 3D spheroidal printing conclude this review.

Cartilaginous spheroid-assembly design considerations for endochondral ossification: towards robotic-driven biomanufacturing

Spheroids have become essential building blocks for biofabrication of functional tissues. Spheroid formats allow high cell-densities to be efficiently engineered into tissue structures closely resembling the native tissues. In this work, we explore the assembly capacity of cartilaginous spheroids (d∼ 150µm) in the context of endochondral bone formation. The fusion capacity of spheroids at various degrees of differentiation was investigated and showed decreased kinetics as well as remodeling capacity with increased spheroid maturity. Subsequently, design considerations regarding the dimensions of engineered spheroid-based cartilaginous mesotissues were explored for the corresponding time points, defining critical dimensions for these type of tissues as they progressively mature. Next, mesotissue assemblies were implanted subcutaneously in order to investigate the influence of spheroid fusion parameters on endochondral ossification. Moreover, as a step towards industrialization, we demonstrated a novel automated image-guided robotics process, based on targeting and registering single-spheroids, covering the range of spheroid and mesotissue dimensions investigated in this work. This work highlights a robust and automated high-precision biomanufacturing roadmap for producing spheroid-based implants for bone regeneration.

Effect of magnetic graphene oxide on cellular behaviors and osteogenesis under a moderate static magnetic field

The biological behaviors of magnetic graphene oxide (MGO) in a static magnetic field (SMF) are unknown. The current study is to investigate the cellular behaviors, osteogenesis and the mechanism in BMSCs treated with MGO combined with an SMF. Results showed that the synthetic MGO particles were bio-compatible and could significantly improve the osteogenesis of BMSCs under SMFs, as verified by elevated alkaline phosphatase activity, mineralized nodule formation, and expressions of mRNA and protein levels. Under SMF at the same intensity, the addition of graphene oxide to Fe₃O₄ could increase the osteogenic ability of BMSCs. The Wnt/β-catenin pathway was indicated to be related to the MGO-driven osteogenic behavior of the BMSCs under SMF. Taken together, our findings suggested that MGO under an SMF could promote osteogenesis in BMSCs through the Wnt/β-catenin pathway and hence should attract more attention for practical applications in bone tissue regeneration.

Advanced biomedical applications based on emerging 3D cell culturing platforms

It is of great value to develop reliable in vitro models for cell biology and toxicology. However, ethical issues and the decreasing number of donors restrict the further use of traditional animal models in various fields, including the emerging fields of tissue engineering and regenerative medicine. The huge gap created by the restrictions in animal models has pushed the development of the increasingly recognized three-dimensional (3D) cell culture, which enables cells to closely simulate authentic cellular behaviour such as close cell-to-cell interactions and can achieve higher functionality. Furthermore, 3D cell culturing is superior to the traditional 2D cell culture, which has obvious limitations and cannot closely mimic the structure and architecture of tissues. In this study, we review several methods used to form 3D multicellular spheroids. The extracellular microenvironment of 3D spheroids plays a role in many aspects of biological sciences, including cell signalling, cell growth, cancer cell generation, and anti-cancer drugs. More recently, they have been explored as basic construction units for tissue and organ engineering. We review this field with a focus on the previous research in different areas using spheroid models, emphasizing aqueous two-phase system (ATPS)-based techniques. Multi-cellular spheroids have great potential in the study of biological systems and can closely mimic the in vivo environment. New technologies to form and analyse spheroids such as the aqueous two-phase system and magnetic levitation are rapidly overcoming the technical limitations of spheroids and expanding their applications in tissue engineering and regenerative medicine.

Transport of nanoprobes in multicellular spheroids

The efficient delivery of drugs to cells depends on their diffusion through the extracellular matrix (ECM) of tissues. Here we present a study on the diffusion of nanoprobes of radius from 1 nm to over 100 nm in the ECM of spheroids of three cell types (HeLa, MCF-7 and fibroblasts). We quantified the nanoparticle transport in the spheroids' proliferating zone. We determined the size-dependent viscosity of the ECM. We revealed that nanoobjects up to 10 nm in radius exhibited unobstructed diffusion in the ECM, regardless of the spheroid type. The presented length-scale dependent viscosity profiles for spheroids pave the way for advanced modelling of drug administration through tissues.

Engineering Multi-Cellular Spheroids for Tissue Engineering and Regenerative Medicine

Multi-cellular spheroids are formed as a 3D structure with dense cell-cell/cell-extracellular matrix interactions, and thus, have been widely utilized as implantable therapeutics and various ex vivo tissue models in tissue engineering. In principle, spheroid culture methods maximize cell-cell cohesion and induce spontaneous cellular assembly while minimizing cellular interactions with substrates by using physical forces such as gravitational or centrifugal forces, protein-repellant biomaterials, and micro-structured surfaces. In addition, biofunctional materials including magnetic nanoparticles, polymer microspheres, and nanofiber particles are combined with cells to harvest composite spheroids, to accelerate spheroid formation, to increase the mechanical properties and viability of spheroids, and to direct differentiation of stem cells into desirable cell types. Biocompatible hydrogels are developed to produce microgels for the fabrication of size-controlled spheroids with high efficiency. Recently, spheroids have been further engineered to fabricate structurally and functionally reliable in vitro artificial 3D tissues of the desired shape with enhanced specific biological functions. This paper reviews the overall characteristics of spheroids and general/advanced spheroid culture techniques. Significant roles of functional biomaterials in advanced spheroid engineering with emphasis on the use of spheroids in the reconstruction of artificial 3D tissue for tissue engineering are also thoroughly discussed.

Cartilage and bone tissue engineering using adipose stromal/stem cells spheroids as building blocks

Scaffold-free techniques in the developmental tissue engineering area are designed to mimic in vivo embryonic processes with the aim of biofabricating, in vitro, tissues with more authentic properties. Cell clusters called spheroids are the basis for scaffold-free tissue engineering. In this review, we explore the use of spheroids from adult mesenchymal stem/stromal cells as a model in the developmental engineering area in order to mimic the developmental stages of cartilage and bone tissues. Spheroids from adult mesenchymal stromal/stem cells lineages recapitulate crucial events in bone and cartilage formation during embryogenesis, and are capable of spontaneously fusing to other spheroids, making them ideal building blocks for bone and cartilage tissue engineering. Here, we discuss data from ours and other labs on the use of adipose stromal/stem cell spheroids in chondrogenesis and osteogenesis in vitro. Overall, recent studies support the notion that spheroids are ideal "building blocks" for tissue engineering by “bottom-up” approaches, which are based on tissue assembly by advanced techniques such as three-dimensional bioprinting. Further studies on the cellular and molecular mechanisms that orchestrate spheroid fusion are now crucial to support continued development of bottom-up tissue engineering approaches such as three-dimensional bioprinting.

Advanced Bottom-Up Engineering of Living Architectures

Bottom-up tissue engineering is a promising approach for designing modular biomimetic structures that aim to recapitulate the intricate hierarchy and biofunctionality of native human tissues. In recent years, this field has seen exciting progress driven by an increasing knowledge of biological systems and their rational deconstruction into key core components. Relevant advances in the bottom-up assembly of unitary living blocks toward the creation of higher order bioarchitectures based on multicellular-rich structures or multicomponent cell-biomaterial synergies are described. An up-to-date critical overview of long-term existing and rapidly emerging technologies for integrative bottom-up tissue engineering is provided, including discussion of their practical challenges and required advances. It is envisioned that a combination of cell-biomaterial constructs with bioadaptable features and biospecific 3D designs will contribute to the development of more robust and functional humanized tissues for therapies and disease models, as well as tools for fundamental biological studies.

The two faces of titanium dioxide nanoparticles bio-camouflage in 3D bone spheroids

Titanium (Ti) and its alloys are widely used in dental implants and hip-prostheses due to their excellent biocompatibility. Growing evidence support that surface degradation due to corrosion and wear processes, contribute to implant failure, since the release of metallic ions and wear particles generate local tissue reactions (peri-implant inflammatory reactions). The generated ions and wear debris (particles at the micron and nanoscale) stay, in a first moment, at the interface implant-bone. However, depending on their size, they can enter blood circulation possibly contributing to systemic reactions and toxicities. Most of the nanotoxicological studies with titanium dioxide nanoparticles (TiO₂ NPs) use conventional two-dimensional cell culture monolayers to explore macrophage and monocyte activation, where limited information regarding bone cells is available. Recently three-dimensional models have been gaining prominence since they present a greater anatomical and physiological relevance. Taking this into consideration, in this work we developed a human osteoblast-like spheroid model, which closely mimics bone cell-cell interactions, providing a more realistic scenario for nanotoxicological studies. The treatment of spheroids with different concentrations of TiO₂ NPs during 72 h did not change their viability significantly. Though, higher concentrations of TiO₂ NPs influenced osteoblast cell cycle without interfering in their ability to differentiate and mineralize. For higher concentration of TiO₂ NPs, collagen deposition and pro-inflammatory cytokine, chemokine and growth factor secretion (involved in osteolysis and bone homeostasis) increased. These results raise the possible use of this model in nanotoxicological studies of osseointegrated devices and demonstrate a possible therapeutic potential of this TiO₂ NPs to prevent or reverse bone resorption.

Remote Control in Formation of 3D Multicellular Assemblies Using Magnetic Forces

Cell constructs have been utilized as building blocks in tissue engineering to closely mimic the natural tissue and also overcome some of the limitations caused by two-dimensional cultures or using scaffolds. External forces can be used to enhance the cells' adhesion and interaction and thus provide better control over production of these structures compared to methods like cell seeding and migration. In this paper, we demonstrate an efficient method to generate uniform, three-dimensional cell constructs using magnetic forces. This method produced spheroids with higher densities and more symmetrical structures than the commonly used centrifugation method for production of cell spheroids. It was also shown that shape of the cell constructs could be changed readily by using different patterns of magnetic field. The application of magnetic fields to impart forces on the cells enhanced the fusion of these spheroids, which could be used to produce larger and more complicated structures for future tissue engineering applications.

Porous tissue strands: avascular building blocks for scalable tissue fabrication

The scalability of cell aggregates such as spheroids, strands, and rings has been restricted by diffusion of nutrient and oxygen into their core. In this study, we introduce a novel concept in generating tissue building blocks with micropores, which represents an alternative solution for vascularization. Sodium alginate porogens were mixed with human adipose-derived stem cells, and loaded into tubular alginate capsules, followed by de-crosslinking of the capsules. The resultant cellular structure exhibited a porous morphology and formed cell aggregates in the form of strands, called 'porous tissue strands (pTSs).' Three-dimensional reconstructions show that pTSs were able to maintain ∼25% porosity with a high pore interconnectivity (∼85%) for 3 weeks. Owing to the porous structure, pTSs showed up-regulated cell viability and proliferation rate as compared to solid counterparts throughout the culture period. pTSs also demonstrated self-assembly capability through tissue fusion yielding larger-scale patches. In this paper, chondrogenesis and osteogenesis of pTSs were also demonstrated, where the porous microstructure up-regulated both chondrogenic and osteogenic functionalities indicated by cartilage- and bone-specific immunostaining, quantitative biochemical assessment and gene expression. These findings indicated the functionality of pTSs, which possessed controllable porosity and self-assembly capability, and had great potential to be utilized as tissue building blocks in distinct applications such as cartilage and bone regeneration.

3D and 4D Bioprinting of the Myocardium: Current Approaches, Challenges, and Future Prospects

3D and 4D bioprinting of the heart are exciting notions in the modern era. However, myocardial bioprinting has proven to be challenging. This review outlines the methods, materials, cell types, issues, challenges, and future prospects in myocardial bioprinting. Advances in 3D bioprinting technology have significantly improved the manufacturing process. While scaffolds have traditionally been utilized, 3D bioprinters, which do not require scaffolds, are increasingly being employed. Improved understanding of the cardiac cellular composition and multiple strategies to tackle the issues of vascularization and viability had led to progress in this field. In vivo studies utilizing small animal models have been promising. 4D bioprinting is a new concept that has potential to advance the field of 3D bioprinting further by incorporating the fourth dimension of time. Clinical translation will require multidisciplinary collaboration to tackle the pertinent issues facing this field.

Engineering principles for guiding spheroid function in the regeneration of bone, cartilage, and skin

There is a critical need for strategies that effectively enhance cell viability and post-implantation performance in order to advance cell-based therapies. Spheroids, which are dense cellular aggregates, overcome many current limitations with transplanting individual cells. Compared to individual cells, the aggregation of cells into spheroids results in increased cell viability, together with enhanced proangiogenic, anti-inflammatory, and tissue-forming potential. Furthermore, the transplantation of cells using engineered materials enables localized delivery to the target site while providing an opportunity to guide cell fate in situ, resulting in improved therapeutic outcomes compared to systemic or localized injection. Despite promising early results achieved by freely injecting spheroids into damaged tissues, growing evidence demonstrates the advantages of entrapping spheroids within a biomaterial prior to implantation. This review will highlight the basic characteristics and qualities of spheroids, describe the underlying principles for how biomaterials influence spheroid behavior, with an emphasis on hydrogels, and provide examples of synergistic approaches using spheroids and biomaterials for tissue engineering applications.

Progress in scaffold-free bioprinting for cardiovascular medicine

Biofabrication of tissue analogues is aspiring to become a disruptive technology capable to solve standing biomedical problems, from generation of improved tissue models for drug testing to alleviation of the shortage of organs for transplantation. Arguably, the most powerful tool of this revolution is bioprinting, understood as the assembling of cells with biomaterials in three‐dimensional structures. It is less appreciated, however, that bioprinting is not a uniform methodology, but comprises a variety of approaches. These can be broadly classified in two categories, based on the use or not of supporting biomaterials (known as “scaffolds,” usually printable hydrogels also called “bioinks”). Importantly, several limitations of scaffold‐dependent bioprinting can be avoided by the “scaffold‐free” methods. In this overview, we comparatively present these approaches and highlight the rapidly evolving scaffold‐free bioprinting, as applied to cardiovascular tissue engineering.

Electrical impedance tomography for real-time and label-free cellular viability assays of 3D tumour spheroids

Real-time and label-free screening of the cell viability of 3D tumour spheroids by electrical impedance tomography.

iPSC-Derived Vascular Cell Spheroids as Building Blocks for Scaffold-Free Biofabrication

Recently a protocol is established to obtain large quantities of human induced pluripotent stem cells (iPSC)-derived endothelial progenitors, called endothelial colony forming cells (ECFC), and of candidate smooth-muscle forming cells (SMFC). Here, the suitability for assembling in spheroids, and in larger 3D cell constructs is tested. iPSC-derived ECFC and SMFC are labeled with tdTomato and eGFP, respectively. Spheroids are formed in ultra-low adhesive wells, and their dynamic proprieties are studied by time-lapse microscopy, or by confocal microscopy. Spheroids are also tested for fusion ability either in the wells, or assembled on the Regenova 3D bioprinter which laces them in stainless steel micro-needles (the "Kenzan" method). It is found that both ECFC and SMFC formed spheroids in about 24 h. Fluorescence monitoring indicated a continuous compaction of ECFC spheroids, but stabilization in those prepared from SMFC. In mixed spheroids, the cell distribution changed continuously, with ECFC relocating to the core, and showing pre-vascular organization. All spheroids have the ability of in-well fusion, but only those containing SMFC are robust enough to sustain assembling in tubular structures. In these constructs a layered distribution of alpha smooth muscle actin-positive cells and extracellular matrix deposition is found. In conclusion, iPSC-derived vascular cell spheroids represent a promising new cellular material for scaffold-free biofabrication.

Iron Oxide Nanoparticles Stimulates Extra-Cellular Matrix Production in Cellular Spheroids

Nanotechnologies have been integrated into drug delivery, and non-invasive imaging applications, into nanostructured scaffolds for the manipulation of cells. The objective of this work was to determine how the physico-chemical properties of magnetic nanoparticles (MNPs) and their spatial distribution into cellular spheroids stimulated cells to produce an extracellular matrix (ECM). The MNP concentration (0.03 mg/mL, 0.1 mg/mL and 0.3 mg/mL), type (magnetoferritin), shape (nanorod—85 nm × 425 nm) and incorporation method were studied to determine each of their effects on the specific stimulation of four ECM proteins (collagen I, collagen IV, elastin and fibronectin) in primary rat aortic smooth muscle cell. Results demonstrated that as MNP concentration increased there was up to a 6.32-fold increase in collagen production over no MNP samples. Semi-quantitative Immunohistochemistry (IHC) results demonstrated that MNP type had the greatest influence on elastin production with a 56.28% positive area stain compared to controls and MNP shape favored elastin stimulation with a 50.19% positive area stain. Finally, there are no adverse effects of MNPs on cellular contractile ability. This study provides insight on the stimulation of ECM production in cells and tissues, which is important because it plays a critical role in regulating cellular functions.

Longitudinal Stretching for Maturation of Vascular Tissues Using Magnetic Forces

Cellular spheroids were studied to determine their use as “bioinks” in the biofabrication of tissue engineered constructs. Specifically, magnetic forces were used to mediate the cyclic longitudinal stretching of tissues composed of Janus magnetic cellular spheroids (JMCSs), as part of a post-processing method for enhancing the deposition and mechanical properties of an extracellular matrix (ECM). The purpose was to accelerate the conventional tissue maturation process via novel post-processing techniques that accelerate the functional, structural, and mechanical mimicking of native tissues. The results of a forty-day study of JMCSs indicated an expression of collagen I, collagen IV, elastin, and fibronectin, which are important vascular ECM proteins. Most notably, the subsequent exposure of fused tissue sheets composed of JMCSs to magnetic forces did not hinder the production of these key proteins. Quantitative results demonstrate that cyclic longitudinal stretching of the tissue sheets mediated by these magnetic forces increased the Young’s modulus and induced collagen fiber alignment over a seven day period, when compared to statically conditioned controls. Specifically, the elastin and collagen content of these dynamically-conditioned sheets were 35- and three-fold greater, respectively, at seven days compared to the statically-conditioned controls at three days. These findings indicate the potential of using magnetic forces in tissue maturation, specifically through the cyclic longitudinal stretching of tissues.

Quantifying the kinetics and morphological changes of the fusion of spheroid building blocks

Tissue fusion, whereby two or more spheroids coalesce, is a process that is fundamental to biofabrication. We have designed a quantitative, high-throughput platform to investigate the fusion of multicellular spheroids using agarose micro-molds. Spheroids of primary human chondrocytes (HCH) or human breast cancer cells (MCF-7) were self-assembled for 24 h and then brought together to form an array comprised of two spheroids (one doublet) per well. To quantify spheroid fusogenicity, we developed two assays: (1) an initial tack assay, defined as the minimum amount of time for two spheroids to form a mechanically stable tissue complex or doublet, and (2) a fusion assay, in which we defined and tracked key morphological parameters of the doublets as a function of time using wide-field fluorescence microscopy over a 24 h time-lapse. The initial tack of spheroid fusion was measured by inverting the micro-molds and centrifuging doublets at various time points to assess their connectedness. We found that the initial tack between two spheroids forms rapidly, with the majority of doublets remaining intact after centrifugation following just 30 min of fusion. Over the course of 24 h of fusion, several morphological changes occurred, which were quantified using a custom image analysis pipeline. End-to-end doublet lengths decreased over time, doublet widths decreased for chondrocytes and increased for MCF-7, contact lengths increased over time, and chondrocyte doublets exhibited higher intersphere angles at the end of fusion. We also assessed fusion by measuring the fluorescence intensity at the plane of fusion, which increased over time for both cell types. Interestingly, we observed that doublets moved and rotated in the micro-wells during fusion and this rotation was inhibited by ROCK inhibitor Y-27632 and myosin II inhibitor blebbistatin. Understanding and optimizing tissue fusion is essential for creating larger tissues, organs, or other structures using individual microtissues as building parts.

Life is 3D: Boosting Spheroid Function for Tissue Engineering

Spheroids provide a 3D environment with intensive cell-cell contacts. As a result of their excellent regenerative properties and rapid progress in their high-throughput production, spheroids are increasingly suggested as building blocks for tissue engineering. In this review, we focus on innovative biotechnological approaches that increase the quality of spheroids for this specific type of application. These include in particular the fabrication of coculture spheroids, mimicking the complex morphology and physiological tasks of natural tissues. In vitro preconditioning under different culture conditions and incorporation of biomaterials improve the function of spheroids and their directed fusion into macrotissues of desired shapes. The continuous development of these sophisticated approaches may markedly contribute to a broad implementation of spheroid-based tissue engineering in future regenerative medicine.

Phenomenological modelling and simulation of cell clusters in 3D cultures

Cell clustering and aggregation are fundamental processes in the development of several tissues and the progression of many diseases. The formation of these aggregates also has a direct impact on the oxygen concentration in their surroundings due to cellular respiration and poor oxygen diffusion through clusters. In this work, we propose a mathematical model that is capable of simulating cell cluster formation in 3D cultures through combining a particle-based and a finite element approach to recreate complex experimental conditions. Cells are modelled considering cell proliferation, cell death and cell-cell mechanical interactions. Additionally, the oxygen concentration profile is calculated through finite element analysis using a reaction-diffusion model that considers cell oxygen consumption and diffusion through the extracellular matrix and the cell clusters. In our model, the local oxygen concentration in the medium determines both cell proliferation and cell death. Numerical predictions are also compared with experimental data from the literature. The simulation results indicate that our model can predict cell clustering, cluster growth and oxygen distribution in 3D cultures. We conclude that the initial cell distribution, cell death and cell proliferation dynamics determine the size and density of clusters. Moreover, these phenomena are directly affected by the oxygen transport in the 3D culture.

Three-dimensional bioprinting using self-assembling scalable scaffold-free "tissue strands" as a new bioink

Recent advances in bioprinting have granted tissue engineers the ability to assemble biomaterials, cells, and signaling molecules into anatomically relevant functional tissues or organ parts. Scaffold-free fabrication has recently attracted a great deal of interest due to the ability to recapitulate tissue biology by using self-assembly, which mimics the embryonic development process. Despite several attempts, bioprinting of scale-up tissues at clinically-relevant dimensions with closely recapitulated tissue biology and functionality is still a major roadblock. Here, we fabricate and engineer scaffold-free scalable tissue strands as a novel bioink material for robotic-assisted bioprinting technologies. Compare to 400 μm-thick tissue spheroids bioprinted in a liquid delivery medium into confining molds, near 8 cm-long tissue strands with rapid fusion and self-assemble capabilities are bioprinted in solid form for the first time without any need for a scaffold or a mold support or a liquid delivery medium, and facilitated native-like scale-up tissues. The prominent approach has been verified using cartilage strands as building units to bioprint articular cartilage tissue.