Functionality of decellularized matrix in cartilage regeneration: A comparison of tissue versus cell sources

Tissue engineering and future directions in regenerative medicine for knee cartilage repair: a comprehensive review

This review evaluates the current landscape and future directions of regenerative medicine for knee cartilage repair, with a particular focus on tissue engineering strategies. In this context, scaffold-based approaches have emerged as promising solutions for cartilage regeneration. Synthetic scaffolds, while offering superior mechanical properties, often lack the biological cues necessary for effective tissue integration. Natural scaffolds, though biocompatible and biodegradable, frequently suffer from inadequate mechanical strength. Hybrid scaffolds, combining elements of both synthetic and natural materials, present a balanced approach, enhancing both mechanical support and biological functionality. Advances in decellularized extracellular matrix scaffolds have shown potential in promoting cell infiltration and integration with native tissues. Additionally, bioprinting technologies have enabled the creation of complex, bioactive scaffolds that closely mimic the zonal organization of native cartilage, providing an optimal environment for cell growth and differentiation. The review also explores the potential of gene therapy and gene editing techniques, including CRISPR-Cas9, to enhance cartilage repair by targeting specific genetic pathways involved in tissue regeneration. The integration of these advanced therapies with tissue engineering approaches holds promise for developing personalized and durable treatments for knee cartilage injuries and osteoarthritis. In conclusion, this review underscores the importance of continued multidisciplinary collaboration to advance these innovative therapies from bench to bedside and improve outcomes for patients with knee cartilage damage.

Engineering a functional ACL reconstruction graft containing a triphasic enthesis-like structure in bone tunnel for the enhancement of graft-to-bone integration

Background

Anterior cruciate ligament (ACL) rupture is a common sports injury, which causes knee instability and abnormal joint kinematics. The current ACL graft was single-phasic, and not convenient for the formation of enthesis-like tissue in the bone tunnel, resulting in poor integration of graft-to-bone.

Methods

A band-shaped acellular tendon (BAT) was prepared as the core component of the ACL reconstruction graft at first, while sleeve-shaped acellular cartilage (SAC) or sleeve-shaped acellular bone (SAB) was fabricated using a vacuum aspiration system (VAS)-based decellularization protocol. The biocompatibility of the three acellular matrixes was evaluated. Furthermore, a collagen-binding peptide (CBP) derived from the A3 domain of von Willebrand factor was respectively fused into the N-terminal of GDF7, TGFβ3, or BMP2 to synthesize three recombinant growth factors capable of binding collagen (named C-GDF7, C-TGFβ3, or C-BMP2), which were respectively tethered to the BAT, SAC or SAB for improving their inducibilities in stem cell differentiation. An in-vitro experiment was performed to evaluate theirs osteogenic, chondrogenic, and tenogenic inducibilities. Then, C-TGFβ3-tethering SAC (C-TGFβ3@SAC) and C-BMP2-tethering SAB (C-BMP2@SAB) were sequentially surrounded at the bone tunnel part of C-GDF7-tethering BAT (C-GDF7@BAT), thus a sleeve-shaped acellular graft with a triphasic enthesis-like structure in bone tunnel part (named tissue-engineered graft, TE graft) was engineered. Lastly, a canine ACL reconstruction model was used to evaluate the in-vivo performance of this TE graft in enhancing graft-to-bone integration.

Results

The BAT, SAC, and SAB well preserved the structure and components of native tendon, cartilage, and bone, showing good biocompatibility. C-GDF7, C-TGFβ3, or C-BMP2 showed a stronger binding ability to BAT, SAC, and SAB. The C-GDF7@BAT, C-TGFβ3@SAC, or C-BMP2@SAB was a controlled delivery system for the scaffold-specific release of GDF7, TGFβ3, and BMP2, thus showing superior tenogenic, chondrogenic, or osteogenic inducibility, respectively. Using a canine ACL reconstruction model, abundant newly-formed bone and connective collagen fibers could be observed at the integration site between TE graft and bone tunnel at postoperative 16 weeks. Meanwhile, the failure load of the reconstructed ACL by TE graft was significantly higher than that of the autograft.

Conclusion

The TE graft could be used to reconstruct ruptured ACL and augment graft-to-bone integration, thus demonstrating high potential for clinical translation in ACL reconstruction.

Translational potential of this article

The findings of the study indicated that the TE graft could be a novel graft for ACL reconstruction with the ability to augment graft-to-bone integration, which may provide a foundation for future clinical application.

Decellularized extracellular matrix biomaterials for regenerative therapies: Advances, challenges and clinical prospects

Tissue engineering and regenerative medicine have shown potential in the repair and regeneration of tissues and organs via the use of engineered biomaterials and scaffolds. However, current constructs face limitations in replicating the intricate native microenvironment and achieving optimal regenerative capacity and functional recovery. To address these challenges, the utilization of decellularized tissues and cell-derived extracellular matrix (ECM) has emerged as a promising approach. These biocompatible and bioactive biomaterials can be engineered into porous scaffolds and grafts that mimic the structural and compositional aspects of the native tissue or organ microenvironment, both in vitro and in vivo. Bioactive dECM materials provide a unique tissue-specific microenvironment that can regulate and guide cellular processes, thereby enhancing regenerative therapies. In this review, we explore the emerging frontiers of decellularized tissue-derived and cell-derived biomaterials and bio-inks in the field of tissue engineering and regenerative medicine. We discuss the need for further improvements in decellularization methods and techniques to retain structural, biological, and physicochemical characteristics of the dECM products in a way to mimic native tissues and organs. This article underscores the potential of dECM biomaterials to stimulate in situ tissue repair through chemotactic effects for the development of growth factor and cell-free tissue engineering strategies. The article also identifies the challenges and opportunities in developing sterilization and preservation methods applicable for decellularized biomaterials and grafts and their translation into clinical products.

Rapid specialization and stiffening of the primitive matrix in developing articular cartilage and meniscus

Understanding early patterning events in the extracellular matrix (ECM) formation can provide a blueprint for regenerative strategies to better recapitulate the function of native tissues. Currently, there is little knowledge on the initial, incipient ECM of articular cartilage and meniscus, two load-bearing counterparts of the knee joint. This study elucidated distinctive traits of their developing ECMs by studying the composition and biomechanics of these two tissues in mice from mid-gestation (embryonic day 15.5) to neo-natal (post-natal day 7) stages. We show that articular cartilage initiates with the formation of a pericellular matrix (PCM)-like primitive matrix, followed by the separation into distinct PCM and territorial/interterritorial (T/IT)-ECM domains, and then, further expansion of the T/IT-ECM through maturity. In this process, the primitive matrix undergoes a rapid, exponential stiffening, with a daily modulus increase rate of 35.7% [31.9 39.6]% (mean [95% CI]). Meanwhile, the matrix becomes more heterogeneous in the spatial distribution of properties, with concurrent exponential increases in the standard deviation of micromodulus and the slope correlating local micromodulus with the distance from cell surface. In comparison to articular cartilage, the primitive matrix of meniscus also exhibits exponential stiffening and an increase in heterogeneity, albeit with a much slower daily stiffening rate of 19.8% [14.9 24.9]% and a delayed separation of PCM and T/IT-ECM. These contrasts underscore distinct development paths of hyaline versus fibrocartilage. Collectively, these findings provide new insights into how knee joint tissues form to better guide cell- and biomaterial-based repair of articular cartilage, meniscus and potentially other load-bearing cartilaginous tissues. STATEMENT OF SIGNIFICANCE: Successful regeneration of articular cartilage and meniscus is challenged by incomplete knowledge of early events that drive the initial formation of the tissues' extracellular matrix in vivo. This study shows that articular cartilage initiates with a pericellular matrix (PCM)-like primitive matrix during embryonic development. This primitive matrix then separates into distinct PCM and territorial/interterritorial domains, undergoes an exponential daily stiffening of ≈36% and an increase in micromechanical heterogeneity. At this early stage, the meniscus primitive matrix shows differential molecular traits and exhibits a slower daily stiffening of ≈20%, underscoring distinct matrix development between these two tissues. Our findings thus establish a new blueprint to guide the design of regenerative strategies to recapitulate the key developmental steps in vivo.

Decellularization of cartilage microparticles: Effects of temperature, supercritical carbon dioxide and ultrasound on biochemical, mechanical, and biological properties

One of the approaches to restoring the structure of damaged cartilage tissue is an intra-articular injection of tissue-engineered medical products (TEMPs) consisting of biocompatible matrices loaded with cells. The most interesting are the absorbable matrices from decellularized tissues, provided that the cellular material is completely removed from them with the maximum possible preservation of the structure and composition of the natural extracellular matrix. The present study investigated the mechanical, biochemical, and biological properties of decellularized porcine cartilage microparticles (DCMps) obtained by techniques, differing only in physical treatments, such as freeze-thaw cycling (Protocol 1), supercritical carbon dioxide fluid (Protocol 2) and ultrasound (Protocol 3). Full tissue decellularization was achieved, as confirmed by the histological analysis and DNA quantification, though all the resultant DCMps had reduced glycosaminoglycans (GAGs) and collagen. The elastic modulus of all DCMp samples was also significantly reduced. Most notably, DCMps prepared with Protocol 3 significantly outperformed other samples in viability and the chondroinduction of the human adipose-derived stem cells (hADSCs), with a higher GAG production per DNA content. A positive ECM staining for type II collagen was also detected only in cartilage-like structures based on ultrasound-treated DCMps. The biocompatibility of a xenogenic DCMps obtained with Protocol 3 has been confirmed for a 6-month implantation in the thigh muscle tissue of mature rats (n = 18). Overall, the results showed that the porcine cartilage microparticles decellularized by a combination of detergents, ultrasound and DNase could be a promising source of scaffolds for TEMPs for cartilage reconstruction.

Functional acellular matrix for tissue repair

In view of their low immunogenicity, biomimetic internal environment, tissue- and organ-like physicochemical properties, and functionalization potential, decellularized extracellular matrix (dECM) materials attract considerable attention and are widely used in tissue engineering. This review describes the composition of extracellular matrices and their role in stem-cell differentiation, discusses the advantages and disadvantages of existing decellularization techniques, and presents methods for the functionalization and characterization of decellularized scaffolds. In addition, we discuss progress in the use of dECMs for cartilage, skin, nerve, and muscle repair and the transplantation or regeneration of different whole organs (e.g., kidneys, liver, uterus, lungs, and heart), summarize the shortcomings of using dECMs for tissue and organ repair after refunctionalization, and examine the corresponding future prospects. Thus, the present review helps to further systematize the application of functionalized dECMs in tissue/organ transplantation and keep researchers up to date on recent progress in dECM usage.

Bioprocessing by Decellularized Scaffold Biomaterials in Cultured Meat: A Review

As novel carrier biomaterials, decellularized scaffolds have promising potential in the development of cellular agriculture and edible cell-cultured meat applications. Decellularized scaffold biomaterials have characteristics of high biocompatibility, bio-degradation, biological safety and various bioactivities, which could potentially compensate for the shortcomings of synthetic bio-scaffold materials. They can provide suitable microstructure and mechanical support for cell adhesion, differentiation and proliferation. To our best knowledge, the preparation and application of plant and animal decellularized scaffolds have not been summarized. Herein, a comprehensive presentation of the principles, preparation methods and application progress of animal-derived and plant-derived decellularized scaffolds has been reported in detail. Additionally, their application in the culture of skeletal muscle, fat and connective tissue, which constitute the main components of edible cultured meat, have also been generally discussed. We also illustrate the potential applications and prospects of decellularized scaffold materials in future foods. This review of cultured meat and decellularized scaffold biomaterials provides new insight and great potential research prospects in food application and cellular agriculture.

The Role of Extracellular Matrix and Hydrogels in Mesenchymal Stem Cell Chondrogenesis and Cartilage Regeneration

Diseases associated with articular cartilage disintegration or loss are still therapeutically challenging. The traditional treatment approaches only alleviate the symptoms while potentially causing serious side effects. The limited self-renewal potential of articular cartilage provides opportunities for advanced therapies involving mesenchymal stem cells (MSCs) that are characterized by a remarkable regenerative capacity. The chondrogenic potential of MSCs is known to be regulated by the local environment, including soluble factors and the less discussed extracellular matrix (ECM) components. This review summarizes the process of chondrogenesis, and also the biological properties of the ECM mediated by mechanotransduction as well as canonical and non-canonical signaling. Our focus is also on the influence of the ECM's physical parameters, molecular composition, and chondrogenic factor affinity on the adhesion, survival, and chondrogenic differentiation of MSCs. These basic biological insights are crucial for a more precise fabrication of ECM-mimicking hydrogels to improve cartilage tissue reconstruction. Lastly, we provide an overview of hydrogel classification and characterization. We also include the results from preclinical models combining MSCs with hydrogels for the treatment of cartilage defects, to support clinical application of this construct. Overall, it is believed that the proper combination of MSCs, hydrogels, and chondrogenic factors can lead to complex cartilage regeneration.

Cellular therapy and tissue engineering for cartilage repair

Articular cartilage (AC) has limited capacity for repair. The first attempt to repair cartilage using tissue engineering was reported in 1977. Since then, cell-based interventions have entered clinical practice in orthopaedics, and several tissue engineering approaches to repair cartilage are in the translational pipeline towards clinical application. Classically, these involve a scaffold, substrate or matrix to provide structure, and cells such as chondrocytes or mesenchymal stromal cells to generate the tissue. We discuss the advantages and drawbacks of the use of various cell types, natural and synthetic scaffolds, multiphasic or gradient-based scaffolds, and self-organizing or self-assembling scaffold-free systems, for the engineering of cartilage constructs. Several challenges persist including achieving zonal tissue organization and integration with the surrounding tissue upon implantation. Approaches to improve cartilage thickness, organization and mechanical properties include mechanical stimulation, culture under hypoxic conditions, and stimulation with growth factors or other macromolecules. In addition, advanced technologies such as bioreactors, biosensors and 3D bioprinting are actively being explored. Understanding the underlying mechanisms of action of cell therapy and tissue engineering approaches will help improve and refine therapy development. Finally, we discuss recent studies of the intrinsic cellular and molecular mechanisms of cartilage repair that have identified novel signals and targets and are inspiring the development of molecular therapies to enhance the recruitment and cartilage reparative activity of joint-resident stem and progenitor cells. A one-fits-all solution is unrealistic, and identifying patients who will respond to a specific targeted treatment will be critical.

Matrix from urine stem cells boosts tissue-specific stem cell mediated functional cartilage reconstruction

Articular cartilage has a limited capacity to self-heal once damaged. Tissue-specific stem cells are a solution for cartilage regeneration; however, ex vivo expansion resulting in cell senescence remains a challenge as a large quantity of high-quality tissue-specific stem cells are needed for cartilage regeneration. Our previous report demonstrated that decellularized extracellular matrix (dECM) deposited by human synovium-derived stem cells (SDSCs), adipose-derived stem cells (ADSCs), urine-derived stem cells (UDSCs), or dermal fibroblasts (DFs) provided an ex vivo solution to rejuvenate human SDSCs in proliferation and chondrogenic potential, particularly for dECM deposited by UDSCs. To make the cell-derived dECM (C-dECM) approach applicable clinically, in this study, we evaluated ex vivo rejuvenation of rabbit infrapatellar fat pad-derived stem cells (IPFSCs), an easily accessible alternative for SDSCs, by the abovementioned C-dECMs, in vivo application for functional cartilage repair in a rabbit osteochondral defect model, and potential cellular and molecular mechanisms underlying this rejuvenation. We found that C-dECM rejuvenation promoted rabbit IPFSCs' cartilage engineering and functional regeneration in both ex vivo and in vivo models, particularly for the dECM deposited by UDSCs, which was further confirmed by proteomics data. RNA-Seq analysis indicated that both mesenchymal-epithelial transition (MET) and inflammation-mediated macrophage activation and polarization are potentially involved in the C-dECM-mediated promotion of IPFSCs' chondrogenic capacity, which needs further investigation.

Extracellular Matrix Microparticles Improve GelMA Bioink Resolution for 3D Bioprinting at Ambient Temperature

Introduction

Current bioinks for 3D bioprinting, such as gelatin-methacryloyl, are generally low viscosity fluids at room temperature, requiring specialized systems to create complex geometries.

Methods and Results

Adding decellularized extracellular matrix microparticles derived from porcine tracheal cartilage to gelatin-methacryloyl creates a yield stress fluid capable of forming self-supporting structures. This bioink blend performs similarly at 25°C to gelatin-methacryloyl alone at 15°C in linear resolution, print fidelity, and tensile mechanics.

Conclusion

This method lowers barriers to manufacturing complex tissue geometries and removes the need for cooling systems.

Preparation and Application of Decellularized ECM-Based Biological Scaffolds for Articular Cartilage Repair: A Review

Cartilage regeneration is dependent on cellular-extracellular matrix (ECM) interactions. Natural ECM plays a role in mechanical and chemical cell signaling and promotes stem cell recruitment, differentiation and tissue regeneration in the absence of biological additives, including growth factors and peptides. To date, traditional tissue engineering methods by using natural and synthetic materials have not been able to replicate the physiological structure (biochemical composition and biomechanical properties) of natural cartilage. Techniques facilitating the repair and/or regeneration of articular cartilage pose a significant challenge for orthopedic surgeons. Whereas, little progress has been made in this field. In recent years, with advances in medicine, biochemistry and materials science, to meet the regenerative requirements of the heterogeneous and layered structure of native articular cartilage (AC) tissue, a series of tissue engineering scaffolds based on ECM materials have been developed. These scaffolds mimic the versatility of the native ECM in function, composition and dynamic properties and some of which are designed to improve cartilage regeneration. This review systematically investigates the following: the characteristics of cartilage ECM, repair mechanisms, decellularization method, source of ECM, and various ECM-based cartilage repair methods. In addition, the future development of ECM-based biomaterials is hypothesized.

Engineering Biomimetic Extracellular Matrix with Silica Nanofibers: From 1D Material to 3D Network

Biomaterials at nanoscale is a fast-expanding research field with which extensive studies have been conducted on understanding the interactions between cells and their surrounding microenvironments as well as intracellular communications. Among many kinds of nanoscale biomaterials, mesoporous fibrous structures are especially attractive as a promising approach to mimic the natural extracellular matrix (ECM) for cell and tissue research. Silica is a well-studied biocompatible, natural inorganic material that can be synthesized as morpho-genetically active scaffolds by various methods. This review compares silica nanofibers (SNFs) to other ECM materials such as hydrogel, polymers, and decellularized natural ECM, summarizes fabrication techniques for SNFs, and discusses different strategies of constructing ECM using SNFs. In addition, the latest progress on SNFs synthesis and biomimetic ECM substrates fabrication is summarized and highlighted. Lastly, we look at the wide use of SNF-based ECM scaffolds in biological applications, including stem cell regulation, tissue engineering, drug release, and environmental applications.

Preliminary Study on the Antigen-Removal from Extracellular Matrix via Different Decellularization

Due to the abundance of bioactive components, surficial decoration with cell-derived extracellular matrix (ECM) is a promising strategy to improve the biological functionality of the tissue engineering scaffolds. However, decellularization is necessary to remove antigenic components in the ECM that may trigger adverse immune response. Freeze-thaw (FT) cycles and treatment with Triton X-100/ammonium hydroxide (TN) are two commonly used decellularization methods for ECM, but their effects on both growth factor retention and antigen removal are still controversial. The objectives of this study are to compare the preservation of ECM texture and beneficial ingredients and the removal of cellular antigens by these two methods. First, the constructs combined bone marrow mesenchymal stem cell-derived ECM and poly(lactic-co-glycolic acid) (PLGA) membrane are prepared and decellularized using FT and TN treatments. Moreover, the effects of decellularization on the ultrastructure and the composition of ECM-decorated PLGA membrane are compared by scanning electron microscope observation and protein quantification. Furthermore, the ECM deposited on PLGA is stripped off and then implanted subcutaneously in rats, and the host macrophage and local lymphocyte responses were investigated. Finally, ECM-decorated porous PLGA scaffolds are implanted into rat calvarial defects, and the new bone formation is evaluated. Our results showed that both methods effectively removed DNA. TN treatment partially retained collagen, glycosaminoglycan, bone morphogenetic protein-2, and vascular endothelial growth factor, and better preserved structural integrity than FT treatment. ECM implants decellularized by both methods induced a mild host response after subcutaneous implantation. Although the total content of residual DNA in the two ECMs digested by the DNA enzyme seemed to be similar and very low, the interfaces between implanted materials and natural tissues in the TN group recruited lower numbers of CD68⁺ macrophages, CD68⁺CD86⁺ (M1) macrophages, and CD4⁺ T lymphocytes than that in FT group, implying that there exist other ECM antigens to influence immune response besides DNA. Furthermore, ECM-decorated scaffolds decellularized by TN treatment induced greater bone formation than that of bare scaffolds in vivo, demonstrating the effective retention of ECM bioactive components after decellularization. This study showed that TN treatment was a more effective and safer decellularization method than FT cycles. Impact statement Decellularization is a prerequisite for extracellular matrix (ECM) application, but there is still no standard for its selection. This study demonstrated that detergent treatment was more effective than freeze-thaw (FT) cycles in removing ECM antigens besides DNA, and the prepared ECM elicited a milder allogenic immune response, which ensured the safety of ECM. Moreover, detergent better preserved the ECM integrity than FT cycles, and effectively retained growth factors, and the decellularized ECM-decorated scaffolds significantly promoted bone repair, which ensured the effectiveness of ECM. This study provides the theoretical and experimental bases for the decellularization strategy of ECM-modified tissue engineering scaffolds.

Bilayered extracellular matrix derived scaffolds with anisotropic pore architecture guide tissue organization during osteochondral defect repair

While some clinical advances in cartilage repair have occurred, osteochondral (OC) defect repair remains a significant challenge, with current scaffold-based approaches failing to recapitulate the complex, hierarchical structure of native articular cartilage (AC). To address this need, we fabricated bilayered extracellular matrix (ECM)-derived scaffolds with aligned pore architectures. By modifying the freeze-drying kinetics and controlling the direction of heat transfer during freezing, it was possible to produce anisotropic scaffolds with larger pores which supported homogenous cellular infiltration and improved sulfated glycosaminoglycan deposition. Neo-tissue organization in vitro could also be controlled by altering scaffold pore architecture, with collagen fibres aligning parallel to the long-axis of the pores within scaffolds containing aligned pore networks. Furthermore, we used in vitro and in vivo assays to demonstrate that AC and bone ECM derived scaffolds could preferentially direct the differentiation of mesenchymal stromal cells (MSCs) towards either a chondrogenic or osteogenic lineage respectively, enabling the development of bilayered ECM scaffolds capable of spatially supporting unique tissue phenotypes. Finally, we implanted these scaffolds into a large animal model of OC defect repair. After 6 months in vivo, scaffold implantation was found to improve cartilage matrix deposition, with collagen fibres preferentially aligning parallel to the long axis of the scaffold pores, resulting in a repair tissue that structurally and compositionally was more hyaline-like in nature. These results demonstrate how scaffold architecture and composition can be spatially modulated to direct the regeneration of complex interfaces such as the osteochondral unit, enabling their use as cell-free, off-the-shelf implants for joint regeneration. STATEMENT OF SIGNIFICANCE: The architecture of the extracellular matrix, while integral to tissue function, is often neglected in the design and evaluation of regenerative biomaterials. In this study we developed a bilayered scaffold for osteochondral defect repair consisting of tissue-specific extracellular matrix (ECM)-derived biomaterials to spatially direct stem/progenitor cell differentiation, with a tailored pore microarchitecture to promote the development of a repair tissue that recapitulates the hierarchical structure of native AC. The use of this bilayered scaffold resulted in improved tissue repair outcomes in a large animal model, specifically the ability to guide neo-tissue organization and therefore recapitulate key aspects of the zonal structure of native articular cartilage. These bilayer scaffolds have the potential to become a new therapeutic option for osteochondral defect repair.

Biomaterial Integration in the Joint: Pathological Considerations, Immunomodulation, and the Extracellular Matrix

Defects of articular joints are becoming an increasing societal burden due to a persistent increase in obesity and aging. For some patients suffering from cartilage erosion, joint replacement is the final option to regain proper motion and limit pain. Extensive research has been undertaken to identify novel strategies enabling earlier intervention to promote regeneration and cartilage healing. With the introduction of decellularized extracellular matrix (dECM), researchers have tapped into the potential for increased tissue regeneration by designing biomaterials with inherent biochemical and immunomodulatory signals. Compared to conventional and synthetic materials, dECM-based materials invoke a reduced foreign body response. It is therefore highly beneficial to understand the interplay of how these native tissue-based materials initiate a favorable remodeling process by the immune system. Yet, such an understanding also demands increasing considerations of the pathological environment and remodeling processes, especially for materials designed for early disease intervention. This knowledge would avoid rejection and help predict complications in conditions with inflammatory components such as arthritides. This review outlines general issues facing biomaterial integration and emphasizes the importance of tissue-derived macromolecular components in regulating essential homeostatic, immunological, and pathological processes to increase biomaterial integration for patients suffering from joint degenerative diseases. This article is protected by copyright. All rights reserved.

Effects of the Leptin-Mediated MAPK/ERK Signaling Pathway on Collagen II Expression in Knee Cartilage of Newborn Male Mice from Obese Maternal Offspring

Epidemiological data suggest that various noncommunicable diseases develop as a result of altered maternal metabolic and physiological status due to exposure to several adverse factors during pregnancy. However, evidence for intrauterine exposure factors and mechanisms underlying the origin of early cartilage disease in chronic osteoarthritic disease is still lacking. In this study, we found that persistent overnutrition during pregnancy in obese mothers led to cartilage damage in neonatal male mice. This was mainly characterized by increased apoptosis with decreased expression of chondrocyte collagen II and low expression of Runx family transcription factor 2 (RUNX2) and SRY-box transcription factor 9 (SOX9). This reduction was also found to be associated with high leptin expression in newborn male mice of obese maternal offspring. Furthermore, the administration of leptin and mitogen-activated protein kinase (MAPK)-extracellular signal-regulated kinase (ERK) inhibitors in primary chondrocytes showed that leptin mediated MAPK/ERK signaling activation and thus affected the key regulators of cartilage matrix metallopeptidase 1 (MMP1) and tissue inhibitor of metalloproteinase 1 (TIMP1), thereby altering the expression of collagen II in mouse cartilage. Altogether, this study provided insights into the molecular mechanisms of cartilage-related disease development and also new clues and evidence for the fetogenetic origin of cartilage diseases.

GREM1 suppresses hypertrophy of engineered cartilage in vitro but not bone formation in vivo

Current repair of articular cartilage (AC) often leads to a lower quality tissue with an unstable hypertrophic phenotype, susceptible to endochondral ossification and development of osteoarthritis. Engineering phenotypically stable AC remains a significant challenge in the cartilage engineering field. This motivates new strategies inspired from the extracellular matrix (ECM) proteins unique to phenotypically stable AC. We have previously shown that BMP antagonist gremlin-1 (GREM1) protein, present in permanent but not transient cartilage, suppresses the hypertrophy of chondrogenically primed bone marrow stem cells (BMSCs) in pellet culture. The goal of this study was to assess the effect of GREM1 on the in vitro and in vivo phenotypic stability of porcine BMSC derived cartilage engineered within chondro-permissive scaffolds. In addition, we explored whether GREM1 would synergise with physioxia, a potent chondrogenesis regulator, when engineering cartilage grafts. GREM1 did not influence the expression of chondrogenic markers (SOX-9, COL2A1), but did suppress the expression of hypertrophic markers (MMP13, COL10A1) in vitro. Cartilage engineered with GREM1 contained higher levels of residual cartilage after 4 weeks in vivo, but endochondral bone formation was not prevented. Higher GREM1 levels did not significantly alter the fate of engineered tissues in vitro or in vivo. The combination of physioxia and GREM1 resulted in higher sGAG deposition in vitro and greater retention of cartilage matrix in vivo than physioxia alone, but again did not suppress endochondral ossification. Therefore, while physioxia and GREM1 regulate BMSCs chondrogenesis in vitro and reduce cartilage loss in vivo, their use does not guarantee the development of stable cartilage.

Hierarchical porous bacterial cellulose scaffolds with natural biomimetic nanofibrous structure and a cartilage tissue-specific microenvironment for cartilage regeneration and repair

The limited three-dimensional (3D) nano-scale pore structure and lack of biological function hamper the application of bacterial cellulose (BC) in cartilage tissue engineering. To address this challenge, 3D hierarchical porous BC/decellularized cartilage extracellular matrix (DCECM) scaffolds with structurally and biochemically biomimetic cartilage regeneration microenvironment were fabricated by freeze-drying technique after EDC/NHS chemical crosslinking. The BC/DCECM scaffolds exhibited excellent mechanical properties, water superabsorbency and shape-memory properties. Compared with the BC control, the BC/DCECM scaffolds exhibited enhanced cell adhesion and proliferation. Cartilage regeneration in vitro and in vivo indicated that the BC/DCECM scaffolds achieved satisfactory neocartilage tissue regeneration with superior original shape fidelity, exterior natural cartilage-like appearance and histologically cartilage-specific lacuna formation and ECM deposition. Furthermore, the BC/DCECM scaffolds achieved superior repair outcomes, as hyaline cartilage-like tissue formed within the defect sites. The present study constitutes a strong step toward the further application of BC in cartilage tissue engineering.

Endogenous repair theory enriches construction strategies for orthopaedic biomaterials: a narrative review

The development of tissue engineering has led to new strategies for mitigating clinical problems; however, the design of the tissue engineering materials remains a challenge. The limited sources and inadequate function, potential risk of microbial or pathogen contamination, and high cost of cell expansion impair the efficacy and limit the application of exogenous cells in tissue engineering. However, endogenous cells in native tissues have been reported to be capable of spontaneous repair of the damaged tissue. These cells exhibit remarkable plasticity, and thus can differentiate or be reprogrammed to alter their phenotype and function after stimulation. After a comprehensive review, we found that the plasticity of these cells plays a major role in establishing the cell source in the mechanism involved in tissue regeneration. Tissue engineering materials that focus on assisting and promoting the natural self-repair function of endogenous cells may break through the limitations of exogenous seed cells and further expand the applications of tissue engineering materials in tissue repair. This review discusses the effects of endogenous cells, especially stem cells, on injured tissue repairing, and highlights the potential utilisation of endogenous repair in orthopaedic biomaterial constructions for bone, cartilage, and intervertebral disc regeneration.

Decellularized extracellular matrix mediates tissue construction and regeneration

Contributing to organ formation and tissue regeneration, extracellular matrix (ECM) constituents provide tissue with three-dimensional (3D) structural integrity and cellular-function regulation. Containing the crucial traits of the cellular microenvironment, ECM substitutes mediate cell–matrix interactions to prompt stem-cell proliferation and differentiation for 3D organoid construction in vitro or tissue regeneration in vivo. However, these ECMs are often applied generically and have yet to be extensively developed for specific cell types in 3D cultures. Cultured cells also produce rich ECM, particularly stromal cells. Cellular ECM improves 3D culture development in vitro and tissue remodeling during wound healing after implantation into the host as well. Gaining better insight into ECM derived from either tissue or cells that regulate 3D tissue reconstruction or organ regeneration helps us to select, produce, and implant the most suitable ECM and thus promote 3D organoid culture and tissue remodeling for in vivo regeneration. Overall, the decellularization methodologies and tissue/cell-derived ECM as scaffolds or cellular-growth supplements used in cell propagation and differentiation for 3D tissue culture in vitro are discussed. Moreover, current preclinical applications by which ECM components modulate the wound-healing process are reviewed.

Main and Minor Types of Collagens in the Articular Cartilage: The Role of Collagens in Repair Tissue Evaluation in Chondral Defects

Several collagen subtypes have been identified in hyaline articular cartilage. The main and most abundant collagens are type II, IX and XI collagens. The minor and less abundant collagens are type III, IV, V, VI, X, XII, XIV, XVI, XXII, and XXVII collagens. All these collagens have been found to play a key role in healthy cartilage, regardless of whether they are more or less abundant. Additionally, an exhaustive evaluation of collagen fibrils in a repaired cartilage tissue after a chondral lesion is necessary to determine the quality of the repaired tissue and even whether or not this repaired tissue is considered hyaline cartilage. Therefore, this review aims to describe in depth all the collagen types found in the normal articular cartilage structure, and based on this, establish the parameters that allow one to consider a repaired cartilage tissue as a hyaline cartilage.

Impact of perlecan, a core component of basement membrane, on regeneration of cartilaginous tissues

As an indispensable component of the extracellular matrix, perlecan (Pln) plays an essential role in cartilaginous tissue function. Although there exist studies suggesting that Pln expressed by cartilaginous tissues is critical for chondrogenesis, few papers have discussed the potential impact Pln may have on cartilage regeneration. In this review, we delineate Pln structure, biomechanical properties, and interactive ligands-which together contribute to the effect Pln has on cartilaginous tissue development. We also review how the signaling pathways of Pln affect cartilage development and scrutinize the potential application of Pln to divisions of cartilage regeneration, spanning vascularization, stem cell differentiation, and biomaterial improvement. The aim of this review is to deepen our understanding of the spatial and temporal interactions that occur between Pln and cartilaginous tissue and ultimately apply Pln in scaffold design to improve cell-based cartilage engineering and regeneration. STATEMENT OF SIGNIFICANCE: As a key component of the basement membrane, Pln plays a critical role in tissue development and repair. Recent findings suggest that Pln existing in the pericellular matrix surrounding mature chondrocytes is actively involved in cartilage regeneration and functionality. We propose that Pln is essential to developing an in vitro matrix niche within biological scaffolds for cartilage tissue engineering.

Cell-derived extracellular matrix materials for tissue engineering

The involvement of cell-derived extracellular matrix (CDM) in assembling tissue engineering scaffolds has yielded significant results. CDM possesses excellent characteristics, such as ideal cellular microenvironment mimicry and good biocompatibility, which make it a popular research direction in the field of bionanomaterials. CDM has significant advantages as an expansion culture substrate for stem cells, including stabilization of phenotype, reversal of senescence, and guidance of specific differentiation. In addition, the applications of CDM-assembled tissue engineering scaffolds for disease simulation and tissue organ repair are comprehensively summarized; the focus is mainly on bone and cartilage repair, skin defect or wound healing, engineered blood vessels, peripheral nerves, and periodontal tissue repair. We consider CDM a highly promising bionic biomaterial for tissue engineering applications and propose a vision for its comprehensive development.

Fabrication and evaluation of an optimized xenogenic decellularized costal cartilage graft: preclinical studies of a novel biocompatible prosthesis for rhinoplasty

On account of the poor biocompatibility of synthetic prosthesis, millions of rhinoplasty recipients have been forced to choose autologous costal cartilage as grafts, which suffer from limited availability, morbidity at the donor site and prolonged operation time. Here, as a promising alternative to autologous costal cartilage, we developed a novel xenogeneic costal cartilage and explored its feasibility as a rhinoplasty graft for the first time. Adopting an improved decellularization protocol, in which the ionic detergent was substituted by trypsin, the resulting decellularized graft was confirmed to preserve more structural components and better mechanics, and eliminate cellular components effectively. The in vitro and in vivo compatibility experiments demonstrated that the decellularized graft showed excellent biocompatibility and biosecurity. Additionally, the functionality assessment of rhinoplasty was performed in a rabbit model, and the condition of grafts after implantation was comprehensively evaluated. The optimized graft exhibited better capacity to reduce the degradation rate and maintain the morphology, in comparison to the decellularized costal cartilage prepared by conventional protocol. These findings indicate that this optimized graft derived from decellularized xenogeneic costal cartilage provides a new prospective for future investigations of rhinoplasty prosthesis and has great potential for clinical application.

Mg-BGNs/DCECM Composite Scaffold for Cartilage Regeneration: A Preliminary In Vitro Study

Cartilage lesions can lead to progressive cartilage degeneration; moreover, they involve the subchondral bone, resulting in osteoarthritis (OA) onset and progression. Bioactive glasses, with the dual function of supporting both bone and cartilage regeneration, have become a promising biomaterial for cartilage/bone engineering applications. This is especially true for those containing therapeutic ions, which act as ion delivery systems and may further promote cartilage repair. In this study, we successfully fabricated Mg-containing bioactive glass nanospheres (Mg-BGNs) and constructed three different scaffolds, DCECM, Mg-BGNs-1/DCECM (1% Mg-BGNs), and Mg-BGNs-2/DCECM (10% Mg-BGNs) scaffold, by incorporating Mg-BGNs into decellularized cartilage extracellular matrix (DCECM). All three scaffolds showed favorable microarchitectural and ion controlled-release properties within the ideal range of pore size for tissue engineering applications. Furthermore, all scaffolds showed excellent biocompatibility and no signs of toxicity. Most importantly, the addition of Mg-BGNs to the DCECM scaffolds significantly promoted cell proliferation and enhanced chondrogenic differentiation induction of mesenchymal stem cells (MSCs) in pellet culture in a dose-dependent manner. Collectively, the multifunctional Mg-BGNs/DCECM composite scaffold not only demonstrated biocompatibility but also a significant chondrogenic response. Our study suggests that the Mg-BGNs/DCECM composite scaffold would be a promising tissue engineering tool for osteochondral lesions, with the ability to simultaneously stimulate articular cartilage and subchondral bone regeneration.

Artificial decellularized extracellular matrix improves the regenerative capacity of adipose tissue derived stem cells on 3D printed polycaprolactone scaffolds

Ideal tissue engineering frameworks should be both an optimal biological microenvironment and a shape and stability providing framework. In this study we tried to combine the advantages of cell-derived artificial extracellular matrix (ECM) with those of 3D printed polycaprolactone (PCL) scaffolds. In Part A, both chondrogenic and osteogenic ECMs were produced by human adipose derived stem cells (hASCs) on 3D-printed PCL scaffolds and then decellularized to create cell free functionalized PCL scaffolds, named acPCL and aoPCL respectively. The decellularization resulted in a significant reduction of the DNA content as well as the removal of nuclei while the ECM was largely preserved. In Part B the bioactivation and the effect of the ac/aoPCL scaffolds on the proliferation, differentiation, and gene expression of hASCs was investigated. The ac/aoPCL scaffolds were found to be non-toxic and allow good adhesion, but do not affect proliferation. In the in vitro investigation of cartilage regeneration, biochemical analysis showed that acPCL scaffolds have an additional effect on chondrogenic differentiation as gene expression analysis showed markers of cartilage hypertrophy. The aoPCL showed a large influence on the differentiation of hASCs. In control medium they were able to stimulate hASCs to produce calcium alone and all genes relevant investigated for osteogenesis were significantly higher expressed on aoPCL than on unmodified PCL. Therefore, we believe that ac/aoPCL scaffolds have a high potential to improve regenerative capacity of unmodified PCL scaffolds and should be further investigated.

Application of bone and cartilage extracellular matrices in articular cartilage regeneration

Articular cartilage has an avascular structure with a poor ability for self-repair; therefore, many challenges arise in cases of trauma or disease. It is of utmost importance to identify the proper biomaterial for tissue repair that has the capability to direct cell recruitment, proliferation, differentiation, and tissue integration by imitating the natural microenvironment of cells and transmitting an orchestra of intracellular signals. Cartilage extracellular matrix (cECM) is a complex nanostructure composed of divergent proteins and glycosaminoglycans (GAGs), which regulate many functions of resident cells. Numerous studies have shown the remarkable capacity of ECM-derived biomaterials for tissue repair and regeneration. Moreover, given the importance of biodegradability, biocompatibility, 3D structure, porosity, and mechanical stability in the design of suitable scaffolds for cartilage tissue engineering, demineralized bone matrix (DBM) appears to be a promising biomaterial for this purpose, as it possesses the aforementioned characteristics inherently. To the best of the authors' knowledge, no comprehensive review study on the use of DBM in cartilage tissue engineering has previously been published. Since so much work is needed to address DBM limitations such as pore size, cell retention, and so on, we decided to draw the attention of researchers in this field by compiling a list of recent publications. This review discusses the implementation of composite scaffolds of natural or synthetic origin functionalized with cECM or DBM in cartilage tissue engineering. Cutting-edge advances and limitations are also discussed in an attempt to provide guidance to researchers and clinicians.

Sustained release of collagen-affinity SDF-1α from book-shaped acellular fibrocartilage scaffold enhanced bone-tendon healing in a rabbit model

Rapid and functional bone-tendon (B-T) healing remains a difficulty in clinical practice. Tissue engineering has emerged as a promising strategy to address this problem. However, the majority of tissue engineering scaffolds are loaded with stem cells to enhance the regenerability in B-T healing, which is complicated and inconvenient for clinical application. Accordingly, developing a cell-free scaffold with chemotactic function and chondrogenic inducibility may be an effective approach. In this study, a collagen affinity peptide derived from the A3 domain of von Willebrand factor (a hemostasis factor) was fused into the C-terminal of a stromal cell-derived factor-1α (SDF-1α) to synthesize a recombinant SDF-1α capable of binding collagen and chemotactic activity. The recombinant SDF-1α was then tethered on the collagen fibers of a book-shaped acellular fibrocartilage scaffold (BAFS), thus fabricating a novel scaffold (C-SDF-1α/BAFS) with chemotactic function and chondrogenic inducibility. In vitro tests determined that this scaffold was noncytotoxic and biomimetic, could attract stem cells migrating to the scaffold using sustainably released C-SDF-1α, and inducedthe interacting stem cells down the chondrogenic lineage. In vivo, the C-SDF-1α/BAFS significantly enhanced the B-T healing in a rabbit partial patellectomy model, as shown by the larger cartilaginous metaplasia region, better fibrocartilage regeneration, additional bone formation, and improved biomechanical properties. Therefore, the findings of the study demonstrate that the C-SDF-1α/BAFS could potentially be applied for B-T healing.

Cell-free decellularized cartilage extracellular matrix scaffolds combined with interleukin 4 promote osteochondral repair through immunomodulatory macrophages: In vitro and in vivo preclinical study

Cartilage regeneration is a complex physiological process. Synovial macrophages play a critical immunomodulatory role in the acute inflammatory response surrounding joint injury. Due to the contrasting differences and heterogeneity of macrophage, the phenotype of macrophages are the key determinants of the healing response after cartilage injury. Biomaterials derived from extracellular matrix have been used for the repair and reconstruction of a variety of tissues by modulating the host macrophage response. However, the immunomodulatory effect of decellularized cartilage extracellular matrix (ECM) on macrophages has not been elucidated. It is necessary to clarify the immunomodulatory properties of decellularized cartilage matrix (DCM) to guide the design of cartilage regeneration materials. Here, we prepared porcine articular cartilage derived DCM and determined the response of mouse bone marrow-derived macrophages (BMDMs) to the pepsin-solubilized DCM (PDCM) in vitro. Macrophages activated by the PDCM could promote bone marrow-derived mesenchymal stem cells (BMSCs) invasion, migration, proliferation, and chondrogenic differentiation. Then, we verified that early optimization of the immunomodulatory effects of the cell-free DCM scaffold using IL-4 in vivo could achieve good cartilage regeneration in a rat knee osteochondral defect model. Therefore, this decellularized cartilage ECM scaffold combined with accurate and active immunomodulatory strategies provides a new approach for the development of cartilage regeneration materials. STATEMENT OF SIGNIFICANCE: This work reports a decellularized cartilage extracellular matrix (DCM) scaffold combined with an accurate and active immunomodulatory strategy to improve cartilage regeneration. Our findings demonstrated that the pepsin-solubilized DCM (PDCM) activated bone marrow-derived macrophages to polarize to a constructive macrophage phenotype. These polarized macrophages promoted bone marrow-derived mesenchymal stem cell invasion, migration, proliferation, and chondrogenic differentiation. DCM scaffolds combined with early-stage intra-articular injection of IL-4 created a wound-healing microenvironment and improved cartilage regeneration in a rat knee osteochondral defect model.

Enhanced articular cartilage decellularization using a novel perfusion-based bioreactor method

Current decellularization methods for articular cartilages require many steps, various and high amounts of detergents, and a relatively long time to produce decellularized scaffolds. In addition, such methods often damage the essential components and the structure of the tissue. This study aims to introduce a novel perfusion-based bioreactor (PBB) method to decellularize bovine articular cartilages efficiently while reducing the harmful physical and chemical steps as well as the duration of the process. This leads to better preservation of the structure and the essential components of the native tissue. Firstly, a certain number of channels (Ø 180 μm) were introduced into both sides of cylindrical articular bovine cartilage disks (5 mm in diameter and 1 mm in thickness). Next, the disks were decellularized in the PBB and a shaker as the control. Using the PBB method resulted in ∼90% reduction of DNA content in the specimens, which was significantly higher than those of the shaker results with ∼60%. Also, ∼50% sulfated glycosaminoglycan (sGAG) content and ∼92% of the compression properties were maintained implying the efficient preservation of the structure and components of the scaffolds. Moreover, the current study indicated that the PBB specimens supported the adherence and proliferation of the new cells effectively. In conclusion, the results show that the use of PBB method increases the efficiency of producing decellularized cartilage scaffolds with a better maintenance of essential components and structure, while reducing the chemicals and steps required for the process. This will pave the way for producing close-to-natural scaffolds for cartilage tissue engineering.

Cell-Free Book-Shaped Decellularized Tendon Matrix Graft Capable of Controlled Release of BMP-12 to Improve Tendon Healing in a Rat Model

BACKGROUND

Achilles tendon (AT) defects often occur in traumatic and chronic injuries. Currently, no graft can satisfactorily regenerate parallel tendinous tissue at the defect site to completely restore AT function.

PURPOSE

To develop a cell-free functional graft by tethering bone morphogenetic protein 12 (BMP-12) on a book-shaped decellularized tendon matrix (BDTM) and to determine whether this graft is more beneficial for AT defect healing than an autograft.

STUDY DESIGN

Controlled laboratory study.

METHODS

Canine patellar tendon was sectioned into a book shape and decellularized to fabricate a BDTM. The collagen-binding domain (CBD) was fused into the N-terminus of BMP-12 to synthesize a recombinant BMP-12 (CBD-BMP-12), which was tethered to the BDTM to prepare a cell-free functional graft (CBD-BMP-12/BDTM). After its tensile resistance, tenogenic inducibility, and BMP-12 release dynamics were evaluated, the efficacy of the graft for tendon regeneration was determined in a rat model. A total of 140 mature male Sprague-Dawley rats underwent AT tenotomy. The defect was reconstructed with reversed AT (autograft group), native BMP-12 tethered to an intact decellularized tendon matrix (IDTM; NAT-BMP-12/IDTM group), native BMP-12 tethered to a BDTM (NAT-BMP-12/BDTM group), CBD-BMP-12 tethered on an IDTM (CBD-BMP-12/IDTM group), and CBD-BMP-12 tethered on a BDTM (CBD-BMP-12/BDTM group). The rats were sacrificed 4 or 8 weeks after surgery to harvest AT specimens. Six specimens from each group at each time point were used for histological evaluation; the remaining 8 specimens were used for biomechanical testing.

RESULTS

In vitro CBD-BMP-12/BDTM was noncytotoxic, showed high biomimetics with native tendons, was suitable for cell adhesion and growth, and had superior tenogenic inducibility. In vivo the defective AT in the CBD-BMP-12/BDTM group regenerated more naturally than in the other groups, as indicated by more spindle-shaped fibroblasts embedded in a matrix of parallel fibers. The biomechanical properties of the regenerated AT in the CBD-BMP-12/BDTM group also increased more significantly than in the other groups.

CONCLUSION

CBD-BMP-12/BDTM is more beneficial than autograft for healing AT defects in a rat model.

CLINICAL RELEVANCE

The findings of this study demonstrate that CBD-BMP-12/BDTM can serve as a practical graft for reconstructing AT defects.

Applications of Biocompatible Scaffold Materials in Stem Cell-Based Cartilage Tissue Engineering

Cartilage, especially articular cartilage, is a unique connective tissue consisting of chondrocytes and cartilage matrix that covers the surface of joints. It plays a critical role in maintaining joint durability and mobility by providing nearly frictionless articulation for mechanical load transmission between joints. Damage to the articular cartilage frequently results from sport-related injuries, systemic diseases, degeneration, trauma, or tumors. Failure to treat impaired cartilage may lead to osteoarthritis, affecting more than 25% of the adult population globally. Articular cartilage has a very low intrinsic self-repair capacity due to the limited proliferative ability of adult chondrocytes, lack of vascularization and innervation, slow matrix turnover, and low supply of progenitor cells. Furthermore, articular chondrocytes are encapsulated in low-nutrient, low-oxygen environment. While cartilage restoration techniques such as osteochondral transplantation, autologous chondrocyte implantation (ACI), and microfracture have been used to repair certain cartilage defects, the clinical outcomes are often mixed and undesirable. Cartilage tissue engineering (CTE) may hold promise to facilitate cartilage repair. Ideally, the prerequisites for successful CTE should include the use of effective chondrogenic factors, an ample supply of chondrogenic progenitors, and the employment of cell-friendly, biocompatible scaffold materials. Significant progress has been made on the above three fronts in past decade, which has been further facilitated by the advent of 3D bio-printing. In this review, we briefly discuss potential sources of chondrogenic progenitors. We then primarily focus on currently available chondrocyte-friendly scaffold materials, along with 3D bioprinting techniques, for their potential roles in effective CTE. It is hoped that this review will serve as a primer to bring cartilage biologists, synthetic chemists, biomechanical engineers, and 3D-bioprinting technologists together to expedite CTE process for eventual clinical applications.

Matrix reverses immortalization-mediated stem cell fate determination

Primary cell culture in vitro suffers from cellular senescence. We hypothesized that expansion on decellularized extracellular matrix (dECM) deposited by simian virus 40 large T antigen (SV40LT) transduced autologous infrapatellar fat pad stem cells (IPFSCs) could rejuvenate high-passage IPFSCs in both proliferation and chondrogenic differentiation. In the study, we found that SV40LT transduced IPFSCs exhibited increased proliferation and adipogenic potential but decreased chondrogenic potential. Expansion on dECMs deposited by passage 5 IPFSCs yielded IPFSCs with dramatically increased proliferation and chondrogenic differentiation capacity; however, this enhanced capacity diminished if IPFSCs were grown on dECM deposited by passage 15 IPFSCs. Interestingly, expansion on dECM deposited by SV40LT transduced IPFSCs yielded IPFSCs with enhanced proliferation and chondrogenic capacity but decreased adipogenic potential, particularly for the dECM group derived from SV40LT transduced passage 15 cells. Our immunofluorescence staining and proteomics data identify matrix components such as basement membrane proteins as top candidates for matrix mediated IPFSC rejuvenation. Both cell proliferation and differentiation were endorsed by transcripts measured by RNASeq during the process. This study provides a promising model for in-depth investigation of the matrix protein influence on surrounding stem cell differentiation.

Bone defect reconstruction via endochondral ossification: A developmental engineering strategy

Traditional bone tissue engineering (BTE) strategies induce direct bone-like matrix formation by mimicking the embryological process of intramembranous ossification. However, the clinical translation of these clinical strategies for bone repair is hampered by limited vascularization and poor bone regeneration after implantation in vivo. An alternative strategy for overcoming these drawbacks is engineering cartilaginous constructs by recapitulating the embryonic processes of endochondral ossification (ECO); these constructs have shown a unique ability to survive under hypoxic conditions as well as induce neovascularization and ossification. Such developmentally engineered constructs can act as transient biomimetic templates to facilitate bone regeneration in critical-sized defects. This review introduces the concept and mechanism of developmental BTE, explores the routes of endochondral bone graft engineering, highlights the current state of the art in large bone defect reconstruction via ECO-based strategies, and offers perspectives on the challenges and future directions of translating current knowledge from the bench to the bedside.

Advances in Functional Polymer Nanofibers: From Spinning Fabrication Techniques to Recent Biomedical Applications

Functional polymeric micro-/nanofibers have emerged as promising materials for the construction of structures potentially useful in biomedical fields. Among all kinds of technologies to produce polymer fibers, spinning methods have gained considerable attention. Herein, we provide a recent review on advances in the design of micro- and nanofibrous platforms via spinning techniques for biomedical applications. Specifically, we emphasize electrospinning, solution blow spinning, centrifugal spinning, and microfluidic spinning approaches. We first introduce the fundamentals of these spinning methods and then highlight the potential biomedical applications of such micro- and nanostructured fibers for drug delivery, tissue engineering, regenerative medicine, disease modeling, and sensing/biosensing. Finally, we outline the current challenges and future perspectives of spinning techniques for the practical applications of polymer fibers in the biomedical field.

3D-Printed Extracellular Matrix/Polyethylene Glycol Diacrylate Hydrogel Incorporating the Anti-inflammatory Phytomolecule Honokiol for Regeneration of Osteochondral Defects

BACKGROUND

Osteoarthritis is the leading cause of disability worldwide; cartilage degeneration and defects are the central features. Significant progress in tissue engineering holds promise to regenerate damaged cartilage tissue. However, a formidable challenge is to develop a 3-dimensional (3D) tissue construct that can regulate local immune environment to facilitate the intrinsic osteochondral regeneration.

PURPOSE

To evaluate efficacy of a 3D-printed decellularized cartilage extracellular matrix (ECM) and polyethylene glycol diacrylate (PEGDA) integrated novel scaffold (PEGDA/ECM) together with the natural compound honokiol (Hon) for regenerating osteochondral defect.

STUDY DESIGN

Controlled laboratory study.

METHODS

We used a stereolithography-based 3D printer for PEGDA/ECM bioprinting. A total of 36 Sprague-Dawley rats with cylindrical osteochondral defect in the trochlear groove of the femur were randomly assigned into 3 different treatments: no scaffold implantation (Defect group), 3D printed PEGDA/ECM scaffold alone (PEGDA/ECM group), or Hon suspended in a 3D-printed PEGDA/ECM scaffold (PEGDA/ECM/Hon group). 12 rats that underwent only medial parapatellar incision surgery were used as normal controls. The femur specimens were postoperatively harvested at 4 and 8 weeks for gross, micro-CT, and histological evaluations. The efficacy of PEGDA/ECM/Hon scaffold on the release of proinflammatory cytokines from the macrophages stimulated by lipopolysaccharide (LPS) was evaluated in-vitro.

RESULTS

In vitro results determined that PEGDA/ECM/Hon scaffold could suppress the release of proinflammatory cytokines from macrophages that were stimulated by LPS. Macroscopic images showed that the PEGDA/ECM/Hon group had significantly higher ICRS scoring than that of defect and PEGDA/ECM groups. Micro-CT evaluation demonstrated that much more bony tissue was formed in the defect sites implanted with the PEGDA/ECM scaffold or PEGDA/ECM/Hon scaffold compared with the untreated defects. Histological analysis showed that the PEGDA/ECM/Hon group had a significant enhancement in osteochondral regeneration at 4 and 8 weeks after surgery in comparison with the ECM/PEGDA or defect group.

CONCLUSION

This study demonstrated that 3D printing of PEGDA/ECM hydrogel incorporating the anti-inflammatory phytomolecule honokiol could provide a promising scaffold for osteochondral defect repair.

Biological perspectives and current biofabrication strategies in osteochondral tissue engineering

Articular cartilage and the underlying subchondral bone are crucial in human movement and when damaged through disease or trauma impacts severely on quality of life. Cartilage has a limited regenerative capacity due to its avascular composition and current therapeutic interventions have limited efficacy. With a rapidly ageing population globally, the numbers of patients requiring therapy for osteochondral disorders is rising, leading to increasing pressures on healthcare systems. Research into novel therapies using tissue engineering has become a priority. However, rational design of biomimetic and clinically effective tissue constructs requires basic understanding of osteochondral biological composition, structure, and mechanical properties. Furthermore, consideration of material design, scaffold architecture, and biofabrication strategies, is needed to assist in the development of tissue engineering therapies enabling successful translation into the clinical arena. This review provides a starting point for any researcher investigating tissue engineering for osteochondral applications. An overview of biological properties of osteochondral tissue, current clinical practices, the role of tissue engineering and biofabrication, and key challenges associated with new treatments is provided. Developing precisely engineered tissue constructs with mechanical and phenotypic stability is the goal. Future work should focus on multi-stimulatory environments, long-term studies to determine phenotypic alterations and tissue formation, and the development of novel bioreactor systems that can more accurately resemble the in vivo environment.

Functional decellularized fibrocartilaginous matrix graft for rotator cuff enthesis regeneration: A novel technique to avoid in-vitro loading of cells

Rapid and functional enthesis regeneration after rotator cuff tear (RCT) remains a challenge in clinic. Current tissue-engineering strategies for solving this challenge are focused on developing grafts with the mode of in-vitro loading cells on a scaffold. However, this mode is complicated and time-inefficient, moreover the preservation of this graft outside a cell incubator is highly inconvenient, thus limiting their clinical application. Developing a cell-free graft with chemotaxis to recruit postoperative injected cells may be a promising approach to solve these problems. Herein, we prepared a recombinant SDF-1α (termed as C-SDF-1α) capable of binding collagen and chemotaxis, which were then tethered on the collagen fibers of book-shaped decellularized fibrocartilage matrix (BDFM) to fabricate this cell-free graft (C-SDF-1α/BDFM). This C-SDF-1α/BDFM is noncytotoxicity and low-immunogenicity, allows synovium-derived mesenchymal stem cells (SMSCs) attachment and proliferation, and shows superior chondrogenic inducibility. More importantly, C-SDF-1α/BDFM released the tethered SDF-1α with a sustained release profile in-vitro and in-vivo, thus steadily recruiting chemokine (C-X-C motif) receptor 4 positive (CXCR4⁺) cells. Rats with RCT were repaired acutely with C-SDF-1α/BDFM together with postoperative CXCR4⁺SMSCs injection (C-SDF-1α/BDFM + CXCR4⁺SMSCs), BDFM in-vitro pre-loaded CXCR4⁺SMSCs (BDFM/CXCR4⁺SMSCs), or direct suture only (CTL). At postoperative 14-day, compared with BDFM/CXCR4⁺SMSCs, C-SDF-1α/BDFM + CXCR4⁺SMSCs showed a little more CXCR4⁺SMSCs at the healing site. At postoperative week 4 or 8, rats treated with C-SDF-1α/BDFM + CXCR4⁺SMSCs presented a similar RC healing quality as BDFM/CXCR4⁺SMSCs, both of which were significantly better than the CTL. Collectively, compared with conventional BDFM/CXCR4⁺SMSCs, C-SDF-1α/BDFM, as a cell-free graft with chemotaxis, could recruit postoperative injected CXCR4⁺cells into the healing site to participating RC healing, thus avoiding the complex process of in-vitro loading cells on a scaffold and necessitating immense care for the graft outside cell incubator, making it very convenient for clinical application.

Impact of Fibronectin Knockout on Proliferation and Differentiation of Human Infrapatellar Fat Pad-Derived Stem Cells

Fibronectin plays an essential role in tissue development and regeneration. However, the effects of fibronectin knockout (FN1-KO) on stem cells' proliferation and differentiation remain unknown. In this study, CRISPR/Cas9 generated FN1-KO in human infrapatellar fat pad-derived stem cells (IPFSCs) was evaluated for proliferation ability including cell cycle and surface markers as well as stemness gene expression and for differentiation capacity including chondrogenic and adipogenic differentiation. High passage IPFSCs were also evaluated for proliferation and differentiation capacity after expansion on decellularized ECM (dECM) deposited by FN1-KO cells. Successful FN1-KO in IPFSCs was confirmed by Sanger sequencing and Inference of CRISPR Edits analysis (ICE) as well as immunostaining for fibronectin expression. Compared to the GFP control, FN1-KO cells showed an increase in cell growth, percentage of cells in the S and G2 phases, and CD105 and CD146 expression but a decrease in expression of stemness markers CD73, CD90, SSEA4, and mesenchymal condensation marker CDH2 gene. FN1-KO decreased both chondrogenic and adipogenic differentiation capacity. Interestingly, IPFSCs grown on dECMs deposited by FN1-KO cells exhibited a decrease in cell proliferation along with a decline in CDH2 expression. After induction, IPFSCs plated on dECMs deposited by FN1-KO cells also displayed decreased expression of both chondrogenic and adipogenic capacity. We concluded that FN1-KO increased human IPFSCs' proliferation capacity; however, this capacity was reversed after expansion on dECM deposited by FN1-KO cells. Significance of fibronectin in chondrogenic and adipogenic differentiation was demonstrated in both FN1-KO IPFSCs and FN(-) matrix microenvironment.

A Comparison between Ultrasonic Bath and Direct Sonicator on Osteochondral Tissue Decellularization

Background:

Decellularization techniques have been widely used in tissue engineering recently. However, applying these methods which are based on removing cells and maintaining the extracellular matrix (ECM) encountered some difficulties for dense tissues such as articular cartilage. Together with chemical agents, using physical methods is suggested to help decellularization of tissues.

Methods:

In this study, to improve decellularization of articular cartilage, the effects of direct and indirect ultrasonic waves as a physical method in addition to sodium dodecyl sulfate (SDS) as chemical agents with 0.1% and 1% (w/v) concentrations were examined. Decellularization process was evaluated by nucleus staining with hematoxylin and eosin (H and E) and by staining glycosaminoglycans (GAG) and collagen.

Results:

The H and E staining indicated that 1% (w/v) SDS in addition to ultrasonic bath for 5 h significantly decreased the cell nucleus residue to lacuna ratio by 66%. Scanning electron microscopy showed that using direct sonication caused formation of micropores on the surface of the sample which results in better penetration of decellularization material and better cell attachment after decellularization. Alcian Blue and Picrosirius Red staining represented GAG and collagen, respectively, which maintained in ECM structure after decellularization by ultrasonic bath and direct sonicator.

Conclusion:

Ultrasonic bath can help better penetration of the decellularization material into the cartilage. This improves the speed of the decellularization process while it has no significant defect on the structure of the tissue.

Combining Stem Cells and Biomaterial Scaffolds for Constructing Tissues and Cell Delivery

Combining stem cells with biomaterial scaffolds serves as a promising strategy for engineering tissues for both in vitro and in vivo applications. This updated review details commonly used biomaterial scaffolds for engineering tissues from stem cells. We first define the different types of stem cells and their relevant properties and commonly used scaffold formulations. Next, we discuss natural and synthetic scaffold materials typically used when engineering tissues, along with their associated advantages and drawbacks and gives examples of target applications. New approaches to engineering tissues, such as 3D bioprinting, are described as they provide exciting opportunities for future work along with current challenges that must be addressed. Thus, this review provides an overview of the available biomaterials for directing stem cell differentiation as a means of producing replacements for diseased or damaged tissues.

Book-Shaped Acellular Fibrocartilage Scaffold with Cell-loading Capability and Chondrogenic Inducibility for Tissue-Engineered Fibrocartilage and Bone-Tendon Healing

Functional fibrocartilage regeneration is a bottleneck during bone-tendon healing, and the currently available tissue-engineering strategies for fibrocartilage regeneration are insufficient because of a lack of appropriate scaffold that can load large seeding-cells and induce chondrogenesis of stem cells. The acellular fibrocartilage scaffold (AFS) contains active growth factors as well as tissue-specific epitopes for cell-matrix interactions, which make it a potential scaffold for tissue-engineered fibrocartilage. A limitation to this scaffold is that its low porosity inhibits cells loading and infiltration. Here, inspired by book appearance, we sectioned native fibrocartilage tissue (NFT) into book-shape to improve cells loading and infiltration, and then decellularized with four protocols: (1) 2% SDS for 6-h, (2) 2% SDS for 24-h, (3) 4 SDS for 6-h, (4) 4% SDS for 24-h, followed by nuclease digestion. The optimal protocol was screened with respect to microstructures, DNA residence, native ingredients reservation, and chondrogenic inducibility of the AFS. In vitro studies demonstrated that this screened scaffold is noncytotoxicity and low-immunogenicity, allows adipose-derived stromal cells (ASCs) attachment and proliferation, shows superior chondrogenic inducibility, and stimulates collagen or glycosaminoglycans secretion. The underlying mechanism for this chondrogenic inducibility may be related to hedgehog pathway activating. Additionally, a novel pattern for fabricating tissue-engineered fibrocartilage was developed to enlarge seeding-cells loading, namely, cell-sheets sandwiched by book-shaped scaffold. In-vivo studies indicate that this screened scaffold alone could induce endogenous cells to satisfactorily regenerate fibrocartilage at 16-week, as characterized by fibrocartilaginous extracellular matrix (ECM) deposition and good interface integration. Interleaving this book-shaped AFS with autologous ASCs-sheets significantly enhanced its ability to regenerate fibrocartilage. Cell tracking demonstrated that fibrochondrocytes, osteoblasts, and osteocytes in the healing interface at postoperative 8-week partly originated from the sandwiched ASCs-sheets. On that basis, we propose the use of this book-shaped AFS and cell sheet technique for fabricating tissue-engineered fibrocartilage to improve bone-tendon healing.

Bionic cartilage acellular matrix microspheres as a scaffold for engineering cartilage

Bionic cartilage acellular matrix microspheres (BCAMMs) made from decelluarized bionic cartilage microspheres (BCMs).