Antifungal edible coatings for fruits based on zein and chitosan nanowhiskers

Fresh produce have a more limited shelf life than processed ones. Their sensory attributes such as appearance and surface texture are important features in consumer perception and liking. The decomposition of fresh produce, which is caused by enzymes, chemical reactions, and microbial infections, often caused by Colletotrichum species, is inevitable. However, it can be slowed down. Several materials have been developed for this purpose, with an emphasis on active coatings using nanomaterials. In this study, the protective effects of a zein coating containing chitosan nanowhiskers (CSW) for the maintenance of fruit quality were investigated using guava (Psidium guajava L.) as a model fruit. CSW were previously characterized, and their antifungal effects against distinct Colletotrichum species (Colletotrichum asianum, Colletotrichum tropicale, Colletotrichum gloeosporioides, and Colletotrichum brevisporum) were proven. Coatings were characterized by thermogravimetric analysis, optical profilometry, and mechanical properties. Total soluble solids, pH, mass loss, and visual inspection of uncoated and coated guava fruits were also verified during 9 days. Results show that CSW length and aspect ratio decreased for longer extraction times. A similar behavior was found for x-ray diffraction in which peak intensity decreases under the same conditions. CSW degradation (ca. 250-400°C) also depends on extraction time in which more crystalline whiskers are the most thermally stable ones. The addition of CSW did not significantly (p < 0.05) modify the homogeneity and continuity of coating but prevented microbial growth assuring fruit quality during storage. In summary, coatings protected guava fruits from post-harvest spoilage while preserving quality and extending shelf life. PRACTICAL APPLICATION: Fresh foods such as fruits and vegetables have a more limited shelf life than processed ones.

Selectivity of herbicides used in corn on Crotalaria ochroleuca G. Don

In the cropping systems that integrate the corn crop, the insertion of Crotalaria ochroleuca G. Don is predominantly intercropped. In this context, there is a need to observe herbicides that present selectivity for this sunn hemp species. The objective of this study was to evaluate the selectivity of pre and post-emergent herbicides on C. ochroleuca. Two field experiments were conducted in randomized blocks with four replications, involving the pre-emergence and post-emergence application of different herbicide treatments. For the pre-emergent ones, amicarbazone, atrazine and flumioxazin provided phytotoxicity higher than 90% and, consequently, low plant biomass. On the other hand, acetochlor and s-metolachlor did not cause phytotoxicity and did not affect the dry mass of crotalaria. In post-emergence, atrazine + mesotrione showed phytotoxicity >95%, followed by nicosulfuron and 2.4-D with phytotoxicity between 50-60%, whereas tembotrione did not cause injury to the plants. Thus, it was found that among the pre-emergent, acetochlor and s-metolachlor were selective, and for the emerging powders, only tembotrione was the most selective for all parameters analyzed.

Genetic diversity of Peltophorum dubium (Spreng.) Taub. progenies from the states of Minas Gerais and Mato Grosso do Sul, Brazil

There is little information regarding the genetic diversity of native species aimed at identifying the best viable progenies for in situ and ex situ conservation. Furthermore, there is a lack of future forest improvement programs. We aimed to know the genetic diversity of 64 Peltophorum dubium (Spreng.) Taub. (Fabaceae) progenies. We determined this species' dendrometric characteristics, and when using multivariate techniques and cluster analysis, we verified the differences between the progenies and groups with less heterogeneity. The progeny and provenance test was installed in Dourados (Mato Grosso do Sul - MS), with seeds collected in three MS regions (Vale do Ivinhema, Serra de Maracaju, and Serra da Bodoquena) and in the micro-region of Lavras (Minas Gerais - MG). The experiment was conducted in an alpha lattice 8 x 8 with four repetitions. We found genetic variability among and within P. dubium populations for all height, diameter, circumference at breast height, volume, and basal area characters. We suggest that P. dubium populations have high genetic variability, which indicates possible genetic improvement through best progeny selection. The UPGMA and Tocher methods grouped the progenies into three and nine groups, respectively, in which the most divergent individuals come from MG and the Bonito region in MS. Based on morphological characters, P. dubium progenies identified as 45, 47, 49, 50, 55, and 59 from MG are the most promising, while progenies 6 and 9 were the least promising.

Controlled release and antiviral activity of acyclovir-loaded PLA/PEG nanofibers produced by solution blow spinning

Herpetic dermatitis and oral recurrent herpes (ORH) are among the most common human infections. Antiviral drugs such as acyclovir (ACV) are used in the standard treatment for ORH. Despite its therapeutic efficacy, ACV is continuously and repetitively administered in high doses. In this sense, the development of controlled release drug delivery systems such as core-shell fibers have a great potential in the treatment of ORH. In this work, poly(lactic acid)/poly(ethylene glycol) (PLA/PEG) fibers were produced by solution blow spinning (SBS) for the controlled release of ACV encapsulated in the core. PLA/PEG nanofibers containing four different blend ratios (100:0, 90:10, 80:20 and 70:30 wt%) without or with 10 wt% ACV were characterized by scanning electron microscopy (SEM), thermogravimetry (TG) and differential scanning calorimetry (DSC). The ACV release profile for 21 days was accessed by UV-Vis spectroscopy. Static water contact angles of the spun fiber mats were measured by the sessile drop method to evaluate fiber wettability upon contact with skin for transdermal release. Cytotoxicity and antiviral efficacy against Herpes simplex viruses (HSV-1) were evaluated using Vero cells. ACV addition did not impact on morphology, but slightly improved thermal stability of the fibers. Addition of hydrophilic PEG in PLA/PEG blends, however, increased drug release as confirmed by contact angle measurements and release profile. The in vitro tests showed the effectiveness of the drug delivery systems developed in reducing HSV-1 viral titer, which is related to the judicious combination of polymers used in the fibrous mats, in addition to not being cytotoxic to Vero cells. These results show the great potential of PLA/PEG solution blow-spun fibers in the controlled release of ACV to develop practical devices for the treatment of cold sores, while favoring the aesthetic appearance by covering them with a soft tissue patch (fibrous mats).

Advances in Functional Polymer Nanofibers: From Spinning Fabrication Techniques to Recent Biomedical Applications

Functional polymeric micro-/nanofibers have emerged as promising materials for the construction of structures potentially useful in biomedical fields. Among all kinds of technologies to produce polymer fibers, spinning methods have gained considerable attention. Herein, we provide a recent review on advances in the design of micro- and nanofibrous platforms via spinning techniques for biomedical applications. Specifically, we emphasize electrospinning, solution blow spinning, centrifugal spinning, and microfluidic spinning approaches. We first introduce the fundamentals of these spinning methods and then highlight the potential biomedical applications of such micro- and nanostructured fibers for drug delivery, tissue engineering, regenerative medicine, disease modeling, and sensing/biosensing. Finally, we outline the current challenges and future perspectives of spinning techniques for the practical applications of polymer fibers in the biomedical field.

Improved mechanical performance of self-adhesive resin cement filled with hybrid nanofibers-embedded with niobium pentoxide

OBJECTIVES

In this study hybrid nanofibers embedded with niobium pentoxide (Nb₂O₅) were synthesized, incorporated in self-adhesive resin cement, and their influence on physical-properties was evaluated.

METHODS

Poly(D,L-lactide), PDLLA cotton-wool-like nanofibers with and without silica-based sol-gel precursors were formulated and spun into submicron fibers via solution blow spinning, a rapid fiber forming technology. The morphology, chemical composition and thermal properties of the spun fibers were characterized by field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS) and Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC), respectively. Produced fibers were combined with a self-adhesive resin cement (RelyX U200, 3M ESPE) in four formulations: (1) U200 resin cement (control); (2) U200+1wt.% PDLLA fibers; (3) U200+1wt.% Nb₂O₅-filled PDLLA composite fibers and (4) U200+1wt.% Nb₂O₅/SiO₂-filled PDLLA inorganic-organic hybrid fibers. Physical properties were assessed in flexure by 3-point bending (n=10), Knoop microhardness (n=5) and degree of conversion (n=3). Data were analyzed with One-way ANOVA and Tukey's HSD (α=5%).

RESULTS

Composite fibers formed of PDLLA-Nb₂O₅ exhibited an average diameter of ∼250nm, and hybrid PDLLA+Nb₂O₅/SiO₂ fibers were slightly larger, ∼300nm in diameter. There were significant differences among formulations for hardness and flexural strength (p<0.05). Degree of conversion of resin cement was not affected for all groups, except for Group 4 (p<0.05).

SIGNIFICANCE

Hybrid reinforcement nanofibers are promising as fillers for dental materials. The self-adhesive resin cement with PDLLA+Nb₂O₅ and PDLLA+Nb₂O₅/SiO₂ presented superior mechanical performance than the control group.

Porous, Aligned, and Biomimetic Fibers of Regenerated Silk Fibroin Produced by Solution Blow Spinning

Solution blow spinning (SBS) has emerged as a rapid and scalable technique for the production of polymeric and ceramic materials into micro-/nanofibers. Here, SBS was employed to produce submicrometer fibers of regenerated silk fibroin (RSF) from Bombyx mori (silkworm) cocoons based on formic acid or aqueous systems. Spinning in the presence of vapor permitted the production of fibers from aqueous solutions, and high alignment could be obtained by modifying the SBS setup to give a concentrated channeled airflow. The combination of SBS and a thermally induced phase separation technique (TIPS) resulted in the production of macro-/microporous fibers with 3D interconnected pores. Furthermore, a coaxial SBS system enabled a pH gradient and kosmotropic salts to be applied at the point of fiber formation, mimicking some of the aspects of the natural spinning process, fostering fiber formation by self-assembly of the spinning dope. This scalable and fast production of various types of silk-based fibrous scaffolds could be suitable for a myriad of biomedical applications.

HDPE/Chitosan Blends Modified with Organobentonite Synthesized with Quaternary Ammonium Salt Impregnated Chitosan

In this study, blends based on a high density polyethylene (HDPE) and chitosan (CS) were successfully prepared by melt processing, in a laboratory internal mixer. The CS biopolymer content effect (up to maximum of 40%), and, the addition of bentonite clay modified with quaternary ammonium salt (CTAB) impregnated chitosan as a compatibilizing agent, on the properties of the blends was analyzed by Fourier transform-infrared spectroscopy (FT-IR), wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analyses (TG), tensile strength, and scanning electron microscopy (SEM). The use of clay modified with CTAB impregnated chitosan, employing a method developed here, improved the compatibility of HDPE with chitosan, and therefore the thermal and some of the mechanical properties were enhanced, making HDPE/chitosan blends suitable candidates for food packaging. It was possible to obtain products of synthetic polymer, HDPE, with natural polymer, chitosan, using a method very used industrially, with acceptable and more friendly properties to the environment, when compared to conventional synthetic polymers. In addition, due to the possibility of impregnated chitosan with quaternary ammonium salt exhibit higher antibacterial activity than neat chitosan, the HDPE/chitosan/organobentonite blends may be potentially applied in food containers to favor the preservation of food for a longer time in comparison to conventional materials.

Accelerated Sonochemical Extraction of Cellulose Nanowhiskers

Studies on sonochemical hydrolysis of cellulose have been suggested as an alternative route to obtaining cellulose nanoparticles. In this work, the potential use of acid hydrolysis assisted by sonication to obtain cellulose whiskers was studied. Parameters such as acid concentration, hydrolysis time and temperature were investigated to evaluate their effect on the morphological properties of the nanowhiskers, as compared to the conventional extraction process by acid hydrolysis with mechanical stirring. Morphology and degree of crystallinity of the nanowhiskers were studied by atomic force microscopy (AFM) and X-ray diffraction (XRD). Results indicated that the extraction time was reduced from about 45 min to less than 3 min using the same acid concentration and temperature used in conventional acid hydrolysis treatment. Likewise, it was possible, within the range of 30 min, to extract whiskers at room temperature or using half the concentration of acid by raising the temperature to about 80 degrees C. These are promising results towards a more economically viable and ecologically friendly extraction procedure used to obtain cellulose nanowhiskers, since both extraction time and acid concentration, used in nanowhisker extraction, were significantly reduced by replacing mechanical with sonochemical stirring.

Controlled Release of Linalool Using Nanofibrous Membranes of Poly(lactic acid) Obtained by Electrospinning and Solution Blow Spinning: A Comparative Study

The controlled-release of natural plant oils such as linalool is of interest in therapeutics, cosmetics, and antimicrobial and larvicidal products. The present study reports the release characteristics of linalool encapsulated at three concentrations (10, 15 and 20 wt.%) in poly(lactic acid) nanofibrous membranes produced by electrospinning and solution blow spinning (SBS) as well as the effect of linalool on fiber morphology and structural properties. PLA nanofibrous membranes were characterized by Scanning Electron Microscopy (SEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and contact angle measurements. The average diameters of the electrospun and solution blow spun nanofibers were similar, ranging from 176 to 240 nm. Linalool behaved as a plasticizer to PLA decreasing the glass transition temperature (Tg), melting point (Tm) and crystallization temperature (TC) of PLA. Curves of the release of linalool at 35 °C were non-linear, showing a clear biphasic pattern consistent with one or more Fickian release components. The time required to release 50% of linalool (t1/2) decreased with increasing linalool concentration. The range in t1/2 values for SBS nanofibers was higher (291-1645s) than the t1/2 values for electrospun fibers (76-575s).

Nanostructured conjugated polymers in chemical sensors: synthesis, properties and applications

Conjugated polymers are organic materials endowed with a π-electron conjugation along the polymer backbone that present appealing electrical and optical properties for technological applications. By using conjugated polymeric materials in the nanoscale, such properties can be further enhanced. In addition, the use of nanostructured materials makes possible miniaturize devices at the micro/nano scale. The applications of conjugated nanostructured polymers include sensors, actuators, flexible displays, discrete electronic devices, and smart fabric, to name a few. In particular, the use of conjugated polymers in chemical and biological sensors is made feasible owning to their sensitivity to the physicochemical conditions of its surrounding environment, such as chemical composition, pH, dielectric constant, humidity or even temperature. Subtle changes in these conditions bring about variations on the electrical (resistivity and capacitance), optical (absorptivity, luminescence, etc.), and mechanical properties of the conjugated polymer, which can be precisely measured by different experimental methods and ultimately associated with a specific analyte and its concentration. The present review article highlights the main features of conjugated polymers that make them suitable for chemical sensors. An especial emphasis is given to nanostructured sensors systems, which present high sensitivity and selectivity, and find application in beverage and food quality control, pharmaceutical industries, medical diagnosis, environmental monitoring, and homeland security, and other applications as discussed throughout this review.

Multi-walled carbon nanotubes and poly(lactic acid) nanocomposite fibrous membranes prepared by solution blow spinning

Nanocomposite fibers based on multi-walled carbon nanotubes (MWCNT) and poly(lactic acid) (PLA) were prepared by solution blow spinning (SBS). Fiber morphology was characterized by scanning electron microscopy (SEM) and optical microscopy (OM). Electrical, thermal, surface and crystalline properties of the spun fibers were evaluated, respectively, by conductivity measurements (4-point probe), thermogravimetric analyses (TGA), differential scanning calorimetry (DSC), contact angle and X-ray diffraction (XRD). OM analysis of the spun mats showed a poor dispersion of MWCNT in the matrix, however dispersion in solution was increased during spinning where droplets of PLA in solution loaded with MWCNT were pulled by the pressure drop at the nozzle, producing PLA fibers filled with MWCNT. Good electrical conductivity and hydrophobicity can be achieved at low carbon nanotube contents. When only 1 wt% MWCNT was added to low-crystalline PLA, surface conductivity of the composites increased from 5 x 10(-8) to 0.46 S/cm. Addition of MWCNT can slightly influence the degree of crystallinity of PLA fibers as studied by XRD and DSC. Thermogravimetric analyses showed that MWCNT loading can decrease the onset degradation temperature of the composites which was attributed to the catalytic effect of metallic residues in MWCNT. Moreover, it was demonstrated that hydrophilicity slightly increased with an increase in MWCNT content. These results show that solution blow spinning can also be used to produce nanocomposite fibers with many potential applications such as in sensors and biosensors.

Effect of fiber treatments on tensile and thermal properties of starch/ethylene vinyl alcohol copolymers/coir biocomposites

Coir fibers received three treatments, namely washing with water, alkali treatment (mercerization) and bleaching. Treated fibers were incorporated in starch/ethylene vinyl alcohol copolymers (EVOH) blends. Mechanical and thermal properties of starch/EVOH/coir biocomposites were evaluated. Fiber morphology and the fiber/matrix interface were further characterized by scanning electron microscopy (SEM). All treatments produced surface modifications and improved the thermal stability of the fibers and consequently of the composites. The best results were obtained for mercerized fibers where the tensile strength was increased by about 53% as compared to the composites with untreated fibers, and about 33.3% as compared to the composites without fibers. The mercerization improved fiber-matrix adhesion, allowing an efficient stress transfer from the matrix to the fibers. The increased adhesion between fiber and matrix was also observed by SEM. Treatment with water also improved values of Young's modulus which were increased by about 75% as compared to the blends without the fibers. Thus, starch/EVOH blends reinforced with the treated fibers exhibited superior properties than neat starch/EVOH.

Electrically conductive nanocomposites made from cellulose nanofibrils and polyaniline

Electrically conductive nanocomposites from cellulose nanofibrils (CNF) were successfully produced by in situ polymerization of aniline onto CNF, and studied by open circuit potential (Voc), four probe direct current (dc) electrical conductivity, ultraviolet-visible (UV-Vis) spectroscopy and scanning electron microscopy (SEM). The oxidative polymerization of aniline using ammonium peroxydisulfate in hydrochloric acid aqueous solutions was realized by the addition of nanofibrils leading to an aqueous suspension of CNF coated with polyaniline (PANI). This procedure lead to stable, green suspensions of CNF coated with PANI in the emeraldine oxidation state as demonstrated by Voc and UV-Vis analyses. Electrically conductive films of this cellulose nanocomposite could be cast from aqueous solutions with conductivity close to the conducting polymer, yet with the potential for more useful flexible films.

Effect of relative humidity on the morphology of electrospun polymer fibers

The effect of relative humidity on the morphology of electrospun fibers of poly(vinyl alcohol), poly(methyl methacrylate), poly(vinyl chloride), polystyrene, and poly(lactic acid) dissolved in solvents such as toluene, N,N-dimethylformamide, 2,2,2-trifluoroethanol, and deionized water was studied by scanning electron microscopy to investigate the factors that may contribute to pore formation. Results showed that the presence of pores depends on factors such as the type of polymers used, the polymer–solvent combination, molecular weight, and the size of the electrospun structure. The final morphology developed implies a competition between the dynamics of phase separation and the rate of solvent evaporation. In addition, continuous solvent evaporation and constant stretching owing to the electric potential difference give rise to the final shape of porous electrospun fibers.Key words: electrospinning, relative humidity, porous fibers, polymers.

Compósitos de matriz poliéster reforçados por fibras curtas de sisal

As propriedades tênseis de compósitos de matriz poliéster, reforçados por fibras curtas de sisal foram determinadas em função do comprimento, teor e orientação das fibras. Os resultados mostram que, para os compósitos investigados, a resistência à tração aumentou com o comprimento das fibras (5 – 45 mm), atingiu um plateau (45 – 55 mm) e então decresceu (55 – 75 mm) enquanto os valores de módulo e de alongamento na ruptura não dependiam do comprimento das fibras. A resistência à tração dos compósitos aumentou com o teor de fibras até 50% em peso e, a partir daí, tendeu a decrescer. A resistência à tração de compósitos reforçados por fibras orientadas e testados longitudinalmente ao reforço foi 10 vezes maior do que a sua resistência transversal e 3 vezes maior do que a resistência de compósitos reforçados por fibras dispostas ao acaso.