Alternating block copolymer-based nanoparticles as tools to modulate the loading of multiple chemotherapeutics and imaging probes

Controlled Release of DNA Binding Anticancer Drugs from Gold Nanoparticles with Near-Infrared Radiation

Traditional chemotherapies target rapidly developing cells in the human body resulting in harsh side effects including fatigue, immune system suppression, and nausea, among others. Delivery systems to focus the active pharmaceutical ingredients (APIs) to the diseased tissue can diminish the negative side effects while improving treatment outcomes. Gold nanoparticles (AuNP) offer many unique advantages as drug delivery vehicles, including being biologically inert, easily adaptable to various shapes and sizes, able to create a strong Au-thiol bond, and able to generate heat upon the absorption of near-infrared light. To this end, a AuNP delivery vehicle was engineered to load and release two DNA binding anti-cancer drugs, mithramycin and doxorubicin, in a controlled fashion. The drugs were loaded onto the surface of the AuNP with temperature sensitive linkages. The amount of heat generated, and subsequent release of the drugs was controlled by the irradiation time with a near-infrared laser. By modulating the linkage used to load the drugs three different release profiles were able to be achieved, indicating the feasibility of such a system for combinational therapy requiring sequential release of APIs.

Lipoplexes for effective in vitro delivery of microRNAs to adult human cardiac fibroblasts for perspective direct cardiac cell reprogramming

Design of nanocarriers for efficient miRNA delivery can significantly improve miRNA-based therapies. Lipoplexes based on helper lipid, dioleoyl phosphatidylethanolamine (DOPE) and cationic lipid [2-(2,3-didodecyloxypropyl)-hydroxyethyl] ammonium bromide (DE) were formulated to efficiently deliver miR-1 or a combination of four microRNAs (miRcombo) to adult human cardiac fibroblasts (AHCFs). Lipoplexes with amino-to-phosphate groups ratio of 3 (N/P 3) showed nanometric hydrodynamic size (372 nm), positive Z-potential (40 mV) and high stability under storage conditions. Compared to commercial DharmaFECT1 (DF), DE-DOPE/miRNA lipoplexes showed superior miRNA loading efficiency (99 % vs. 64 %), and faster miRNA release (99 % vs. 82 % at 48 h). DE-DOPE/miR-1 lipoplexes showed superior viability (80-100 % vs. 50 %) in AHCFs, a 2-fold higher miR-1 expression and Twinfilin-1 (TWF-1) mRNA downregulation. DE-DOPE/miRcombo lipoplexes significantly enhanced AHCFs reprogramming into induced cardiomyocytes (iCMs), as shown by increased expression of CM markers compared to DF/miRcombo.

Exogenous Contrast Agents in Photoacoustic Imaging: An In Vivo Review for Tumor Imaging

The field of cancer theranostics has grown rapidly in the past decade and innovative ‘biosmart’ theranostic materials are being synthesized and studied to combat the fast growth of cancer metastases. While current state-of-the-art oncology imaging techniques have decreased mortality rates, patients still face a diminished quality of life due to treatment. Therefore, improved diagnostics are needed to define in vivo tumor growths on a molecular level to achieve image-guided therapies and tailored dosage needs. This review summarizes in vivo studies that utilize contrast agents within the field of photoacoustic imaging—a relatively new imaging modality—for tumor detection, with a special focus on imaging and transducer parameters. This paper also details the different types of contrast agents used in this novel diagnostic field, i.e., organic-based, metal/inorganic-based, and dye-based contrast agents. We conclude this review by discussing the challenges and future direction of photoacoustic imaging.

Effects of Organic Acids on Drug Release From Ternary Polypeptide Nanoparticles Entrapping Carfilzomib

Carfilzomib (CFZ) is an FDA-approved proteasome inhibitor with antineoplastic properties against various cancers, yet its short blood retention time after intravenous injection (< 30 min) makes clinical applications limited to multiple myeloma. We previously developed ternary polypeptide nanoparticles (tPNPs) as a new nanoparticle formulation of CFZ to overcome these limitations. The formulation was prepared by polyion complexation between poly(ethylene glycol)-poly(L-glutamate) block copolymers (PEG-PLE) and CFZ-cyclodextrin (CD) inclusion complexes, where CDs were positively charged with 7 primary amines attached while PEG-PLE carried 100 carboxyl groups per polymer chain. Although tPNPs greatly improved biostability of CFZ, CFZ-loaded tPNPs (CFZ-tPNPs) still showed burst drug release and mediocre drug retention under physiological conditions. To address these issues, organic acids are tested as stabilizers in this study to improve particle stability and drug retention for tPNPs. Charge densities in the core of CFZ-tPNPs were optimized with selected organic acids such as citric acid (CA) and lactic acid (LA) at varying mixing ratios. Organic acids successfully maintained small particle size suitable for intravenous injection and drug delivery (diameters < 60 nm), improved CFZ solubility (> 1 mg/mL), allowed for lyophilization and easy reconstitution in various buffers, enhanced drug retention (> 60% post 24 h incubation), and suppressed burst drug release in the first 6 h following solubilization. These results demonstrate that organic acid stabilized tPNPs are useful as an injection formulation of CFZ, which may expand the utility of the proteasome inhibitor.

Novel polyurethane based particulate formulations of infliximab reduce inflammation in DSS induced murine model of colitis - A preliminary study

Our recent study showed that novel infliximab (INF) loaded polyesterurethane (INF-PU) and INF-PU-PEG particulate formulations reduced inflammation in an in-vitro epithelial inflammation model. In this study we investigated therapeutic potential of novel INF-PU and INF-PU-PEG particulate formulations to reduce inflammation in a dextran sodium sulfate (DSS) induced murine model of colitis. Severity of colitis was assessed by measurement of disease activity index (DAI) score, inflammatory markers (neutrophil infiltration, TNFα) and histological score. Treatment groups orally administered with INF-PU and INF-PU-PEG particulate formulations showed improvement in the clinical signs of colitis, similar to that observed with intraperitoneally administered INF, in both, moderate and severe DSS induced colitis model. This was related to a significant reduction in inflammatory cytokines, resulting in a significant reduction in histological score (ANOVA; p < 0.05), indicative of mucosal healing, a key goal of IBD therapy. This could be attributed to its targeted delivery to the inflamed colon and higher permeation of these particulate formulations across the inflamed colonic mucosa, as observed by the confocal images, resulting in local inhibition of TNFα at its site of production. These promising preliminary results warrant further investigation of orally administered INF and its novel particulate formulations in a wider preclinical study.

Microfluidic-assisted synthesis of multifunctional iodinated contrast agent polymeric nanoplatforms

Contrast Induced Nephropathy is the most severe side-effect arising after non-ionic iodinated contrast agents (CAs) intravenous administration. The use of antioxidants (i.e., N-Acetylcysteine; NAC) is one of the attempted prevention approaches. Herein, we describe the microfluidic-assisted synthesis of iodinated polymeric nanoparticles (NPs) as new multifunctional blood pool CA. The aim of this research is to co-encapsulate Iohexol (IOX; iodinated CA) and NAC (preventive agent) into poly-D,L-lactide-co-glycolide (PLGA) and PEGylated-PLGA (PLGA-PEG) NPs to exploit CA diagnostic proprieties and NAC preventing antioxidant activity. A microfluidic-assisted nanoprecipitation protocol has been set-up for PLGA and PLGA-PEG NPs, evaluating the effect of formulation and microfluidic parameters by analysing the size, PDI and IOX and NAC encapsulation efficiency. The optimized NPs (PLGA-PEG, L:G 50:50, 5% PEG, Mw 90 kDa) formulated with a size of 67 ± 2.8 nm with PDI < 0.2, spherical shape, and an IOX and NAC encapsulation efficiency of 38% and 20%, respectively. The IOX and NAC encapsulation was confirmed by FTIR and DSC. In vitro release study showed an IOX retention into the polymeric matrix and NAC sustained release up to 24-48 h stating microfluidics as powerful tool for the formulation of multifunctional nanoplatforms. Finally, the protective effect of NPs and NAC were preliminary assessed on human kidney cells.

Intratumoral injection of hydrogel-embedded nanoparticles enhances retention in glioblastoma

Intratumoral drug delivery is a promising approach for the treatment of glioblastoma multiforme (GBM). However, drug washout remains a major challenge in GBM therapy. Our strategy, aimed at reducing drug clearance and enhancing site-specific residence time, involves the local administration of a multi-component system comprised of nanoparticles (NPs) embedded within a thermosensitive hydrogel (HG). Herein, our objective was to examine the distribution of NPs and their cargo following intratumoral administration of this system in GBM. We hypothesized that the HG matrix, which undergoes rapid gelation upon increases in temperature, would contribute towards heightened site-specific retention and permanence of NPs in tumors. BODIPY-containing, infrared dye-labeled polymeric NPs embedded in a thermosensitive HG (HG-NPs) were fabricated and characterized. Retention and distribution dynamics were subsequently examined over time in orthotopic GBM-bearing mice. Results demonstrate that the HG-NPs system significantly improved site-specific, long-term retention of both NPs and BODIPY, with co-localization analyses showing that HG-NPs covered larger areas of the tumor and the peri-tumor region at later time points. Moreover, NPs released from the HG were shown to undergo uptake by surrounding GBM cells. Findings suggest that intratumoral delivery with HG-NPs has immense potential for GBM treatment, as well as other strategies where site-specific, long-term retention of therapeutic agents is warranted.

Development of Natural-Based Bone Cement for a Controlled Doxorubicin-Drug Release

Osteosarcoma (OS) accounts for 60% of all global bone cancer diagnoses. Intravenous administration of Doxorubicin Hydrochloride (DOXO) is the current form of OS treatment, however, systemic delivery has been linked to the onset of DOXO induced cardiomyopathy. Biomaterials including calcium phosphate cements (CPCs) and nanoparticles (NPs) have been tested as localized drug delivery scaffolds for OS cells. However, the tumor microenvironment is critical in cancer progression, with mesenchymal stem cells (MSCs) thought to promote OS metastasis and drug resistance. The extent of MSC assisted survival of OS cells in response to DOXO delivered by CPCs is unknown. In this study, we aimed at investigating the effect of DOXO release from a new formulation of calcium phosphate-based bone cement on the viability of OS cells cocultured with hMSC in vitro. NPs made of PLGA were loaded with DOXO and incorporated in the formulated bone cement to achieve local drug release. The inclusion of PLGA-DOXO NPs into CPCs was also proven to increase the levels of cytotoxicity of U2OS cells in mono- and coculture after 24 and 72 h. Our results demonstrate that a more effective localized DOXO delivery can be achieved via the use of CPCs loaded with PLGA-DOXO NPs compared to CPCs loaded with DOXO, by an observed reduction in metabolic activity of U2OS cells in indirect coculture with hMSCs. The presence of hMSCs offer a degree of DOXO resistance in U2OS cells cultured on PLGA-DOXO NP bone cements. The consideration of the tumor microenvironment via the indirect inclusion of hMSCs in this study can act as a starting point for future direct coculture and in vivo investigations.

An Insight into the Structural Diversity and Clinical Applicability of Polyurethanes in Biomedicine

Due to their mechanical properties, ranging from flexible to hard materials, polyurethanes (PUs) have been widely used in many industrial and biomedical applications. PUs’ characteristics, along with their biocompatibility, make them successful biomaterials for short and medium-duration applications. The morphology of PUs includes two structural phases: hard and soft segments. Their high mechanical resistance featuresare determined by the hard segment, while the elastomeric behaviour is established by the soft segment. The most important biomedical applications of PUs include antibacterial surfaces and catheters, blood oxygenators, dialysis devices, stents, cardiac valves, vascular prostheses, bioadhesives/surgical dressings/pressure-sensitive adhesives, drug delivery systems, tissue engineering scaffolds and electrospinning, nerve generation, pacemaker lead insulation and coatings for breast implants. The diversity of polyurethane properties, due to the ease of bulk and surface modification, plays a vital role in their applications.

Image-guided mathematical modeling for pharmacological evaluation of nanomaterials and monoclonal antibodies

While plasma concentration kinetics has traditionally been the predictor of drug pharmacological effects, it can occasionally fail to represent kinetics at the site of action, particularly for solid tumors. This is especially true in the case of delivery of therapeutic macromolecules (drug-loaded nanomaterials or monoclonal antibodies), which can experience challenges to effective delivery due to particle size-dependent diffusion barriers at the target site. As a result, disparity between therapeutic plasma kinetics and kinetics at the site of action may exist, highlighting the importance of target site concentration kinetics in determining the pharmacodynamic effects of macromolecular therapeutic agents. Assessment of concentration kinetics at the target site has been facilitated by non-invasive in vivo imaging modalities. This allows for visualization and quantification of the whole-body disposition behavior of therapeutics that is essential for a comprehensive understanding of their pharmacokinetics and pharmacodynamics. Quantitative non-invasive imaging can also help guide the development and parameterization of mathematical models for descriptive and predictive purposes. Here, we present a review of the application of state-of-the-art imaging modalities for quantitative pharmacological evaluation of therapeutic nanoparticles and monoclonal antibodies, with a focus on their integration with mathematical models, and identify challenges and opportunities. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Diagnostic Tools > in vivo Nanodiagnostics and Imaging Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Modeling Nanocarrier Transport across a 3D In Vitro Human Blood-Brain-Barrier Microvasculature

Polymer nanoparticles (NPs), due to their small size and surface functionalization potential have demonstrated effective drug transport across the blood-brain-barrier (BBB). Currently, the lack of in vitro BBB models that closely recapitulate complex human brain microenvironments contributes to high failure rates of neuropharmaceutical clinical trials. In this work, a previously established microfluidic 3D in vitro human BBB model, formed by the self-assembly of human-induced pluripotent stem cell-derived endothelial cells, primary brain pericytes, and astrocytes in triculture within a 3D fibrin hydrogel is exploited to quantify polymer NP permeability, as a function of size and surface chemistry. Microvasculature are perfused with commercially available 100-400 nm fluorescent polystyrene (PS) NPs, and newly synthesized 100 nm rhodamine-labeled polyurethane (PU) NPs. Confocal images are taken at different timepoints and computationally analyzed to quantify fluorescence intensity inside/outside the microvasculature, to determine NP spatial distribution and permeability in 3D. Results show similar permeability of PS and PU NPs, which increases after surface-functionalization with brain-associated ligand holo-transferrin. Compared to conventional transwell models, the method enables rapid analysis of NP permeability in a physiologically relevant human BBB set-up. Therefore, this work demonstrates a new methodology to preclinically assess NP ability to cross the human BBB.

Systematic comparison of methods for determining the in vivo biodistribution of porous nanostructured injectable inorganic particles

With a wide variety of biodistribution measurement techniques reported in the literature, it is important to perform side-by-side comparisons of results obtained with different methods on the same particle platform, to determine differences across methods, highlight advantages and disadvantages, and inform methods selection according to specific applications. Inorganic nanostructured particles (INPs) have gained a central role in the development of injectable delivery vectors thanks to their controllable design, biocompatibility, and favorable degradation kinetic. Thus, accurate determination of in vivo biodistribution of INPs is a key aspect of developing and optimizing this class of delivery vectors. In this study, a systematic comparison of spectroscopy (inductively coupled plasma optical emission spectroscopy), fluorescence (in vivo imaging system, confocal microscopy, and plate reader), and radiolabeling (gamma counter)-based techniques is performed to assess the accuracy and sensitivity of biodistribution measurements in mice. Each method is evaluated on porous silicon particles, an established and versatile injectable delivery platform. Biodistribution is evaluated in all major organs and compared in terms of absolute results (%ID/g and %ID/organ when possible) and sensitivity (σ_%). Finally, we discuss how these results can be extended to inform method selection for other platforms and specific applications, with an outlook to potential benefit for pre-clinical and clinical studies. Overall, this study presents a new practical guide for selection of in vivo biodistribution methods that yield quantitative results. STATEMENT OF SIGNIFICANCE: The significance of this work lies in the use of a single platform to test performances of different biodistribution methods in vivo, with a strict quantitative metric. These results, united with the qualitative comparison of advantages and disadvantages of each technique, are aimed at supporting the rational choice of each different method according to the specific application, to improve the quantitative description of biodistribution results that will be published by others in the future.