A rapid biofabrication technique for self-assembled collagen-based multicellular and heterogeneous 3D tissue constructs

A self-assembly and cellular migration based fabrication of high-density 3D tubular constructs of barrier forming membranes

Three-dimensional (3D) in vitro models, superior in simulating physiological conditions compared to 2D models, offer intricate cell-cell and cell-ECM interactions with diverse signaling cues like fluid shear stress and growth factor gradients. Yet, developing 3D tissue barrier models, specifically perfusable luminal structures with dense, multicellular constructs maintained for extended durations with oxygen and nutrients, remains a technical challenge. Here, we describe a molding-based approach for the fabrication of free-standing, perfusable, high cellular density tissue constructs using a self-assembly and migration process to form functional barriers. This technique utilizes a polytetrafluoroethylene (PTFE)-coated stainless-steel wire, held by stainless steel needles, as a template for a perfusable channel within an elongated PDMS well. Upon adding a bio-ink mix of cells and collagen, it self-assembles into a high cell density layer conformally around the wire. Removing the wire reveals a hollow construct, connectable to an inlet and outlet for perfusion. This scalable method allows creating varied dimensions and multicellular configurations. Notably, post-assembly, cells such as human umbilical vein endothelial cells (HUVECs) migrate to the surface and form functional barriers with adherens junctions. Permeability tests and fluorescence imaging confirm that these constructs closely mimic in vivo endothelial barrier permeability, exhibiting the lowest permeability among all in vitro models in the literature. Unlike traditional methods involving uneven post-seeding of endothelial cells leading to subpar barriers, our approach is a straightforward alternative for fabricating complex perfusable 3D tissue constructs and effective tissue barriers for use in various applications, including tissue engineering, drug screening, and disease modeling.

Impact of 3D collagen-based model and hydrostatic pressure on periodontal ligament fibroblast: A morpho-biochemical analysis

This study developed a customized hydrostatic pressure-based loading environment to investigate the effect of static hydrostatic pressure on the periodontal ligament fibroblasts (PDLf) in a three-dimensional (3D) collagen-based model. The cylindrical tissue constructs were comprised of PDL fibroblast cells seeded in type I collagen matrices and divided into three experimental groups: Control (no load), low-load (∼0.07 kPa), and high-load (∼60 kPa), all subjected to 24 h of experimental duration. Cells in the 3D construct were stained with fluorophore-conjugated antibodies for cytoskeletal protein F-actin and matricellular protein periostin. Cell culture supernatant was assessed for receptor activator of nuclear factor kappaB ligand (RANKL) and osteoprotegerin (OPG) expression. Transmission electron microscopy examined the contact between the cells and the collagen matrix. Ultrastructural changes in the 3D collagen matrix were also analyzed using scanning electron microscopy. Experiments were performed in triplicates, and data was analyzed using one-way ANOVA (p < 0.05). The 3D PDLf constructs from the low-load group demonstrated the highest levels of homogeneous cell distribution and higher expression of F-actin and periostin with enhanced interaction with the matrix. The collagen matrix in this group showed more closely packed fibers forming thicker bundles when compared to the control and the high-load 3D PDLf constructs. Nonuniform cell distribution with decreased expression of F-actin and periostin was observed in the control and high-load PDLf constructs. The high-load group showed the highest RANKL/OPG expression. This study demonstrated low-level hydrostatic pressure's role in regulating PDLf functions and extracellular matrix response, while excessive hydrostatic pressure may be detrimental to PDL fibroblast cell function.

Three-dimensional oxygen concentration monitoring in hydrogels using low-cost phosphorescence lifetime imaging for tissue engineering

Oxygen concentration measurement in 3D hydrogels is vital in 3D cell culture and tissue engineering. However, standard 3D imaging systems capable of measuring oxygen concentration with adequate precision are based on advanced microscopy platforms, which are not accessible in many laboratories due to the system's complexity and the high price. In this work, we present a fast and low-cost phosphorescence lifetime imaging design for measuring the lifetime of oxygen-quenched phosphorescence emission with 0.25 µs temporal precision and sub-millimeter spatial resolution in 3D. By combining light-sheet illumination and the frequency-domain lifetime measurement using a commercial rolling-shutter CMOS camera in the structure of a conventional optical microscope, this design is highly customizable to accommodate application-specific research needs while also being low-cost as compared to advanced instruments. As a demonstration, we made a fluidic device with a gas-permeable film to create an artificial oxygen gradient in the hydrogel sample. Dye-embedded beads were distributed in the hydrogel to conduct continuous emission lifetime monitoring when nitrogen was pumped through the fluidic channel and changed oxygen distribution in the sample. The dynamics of the changes in lifetime co-related with their location in the gel of size 0.5 mm×1.5 mm×700 µm demonstrate the ability of this design to measure the oxygen concentration stably and precisely in 3D samples.

A roadmap for developing and engineering in vitro pulmonary fibrosis models

Idiopathic pulmonary fibrosis (IPF) is a severe form of pulmonary fibrosis. IPF is a fatal disease with no cure and is challenging to diagnose. Unfortunately, due to the elusive etiology of IPF and a late diagnosis, there are no cures for IPF. Two FDA-approved drugs for IPF, nintedanib and pirfenidone, slow the progression of the disease, yet fail to cure or reverse it. Furthermore, most animal models have been unable to completely recapitulate the physiology of human IPF, resulting in the failure of many drug candidates in preclinical studies. In the last few decades, the development of new IPF drugs focused on changes at the cellular level, as it was believed that the cells were the main players in IPF development and progression. However, recent studies have shed light on the critical role of the extracellular matrix (ECM) in IPF development, where the ECM communicates with cells and initiates a positive feedback loop to promote fibrotic processes. Stemming from this shift in the understanding of fibrosis, there is a need to develop in vitro model systems that mimic the human lung microenvironment to better understand how biochemical and biomechanical cues drive fibrotic processes in IPF. However, current in vitro cell culture platforms, which may include substrates with different stiffness or natural hydrogels, have shortcomings in recapitulating the complexity of fibrosis. This review aims to draw a roadmap for developing advanced in vitro pulmonary fibrosis models, which can be leveraged to understand better different mechanisms involved in IPF and develop drug candidates with improved efficacy. We begin with a brief overview defining pulmonary fibrosis and highlight the importance of ECM components in the disease progression. We focus on fibroblasts and myofibroblasts in the context of ECM biology and fibrotic processes, as most conventional advanced in vitro models of pulmonary fibrosis use these cell types. We transition to discussing the parameters of the 3D microenvironment that are relevant in pulmonary fibrosis progression. Finally, the review ends by summarizing the state of the art in the field and future directions.

3D Organoids for Regenerative Endodontics

Apical periodontitis is the inflammation and destruction of periradicular tissues, mediated by microbial factors originating from the infected pulp space. This bacteria-mediated inflammatory disease is known to interfere with root development in immature permanent teeth. Current research on interventions in immature teeth has been dedicated to facilitating the continuation of root development as well as regenerating the dentin-pulp complex, but the fundamental knowledge on the cellular interactions and the role of periapical mediators in apical periodontitis in immature roots that govern the disease process and post-treatment healing is limited. The limitations in 2D monolayer cell culture have a substantial role in the existing limitations of understanding cell-to-cell interactions in the pulpal and periapical tissues. Three-dimensional (3D) tissue constructs with two or more different cell populations are a better physiological representation of in vivo environment. These systems allow the high-throughput testing of multi-cell interactions and can be applied to study the interactions between stem cells and immune cells, including the role of mediators/cytokines in simulated environments. Well-designed 3D models are critical for understanding cellular functions and interactions in disease and healing processes for future therapeutic optimization in regenerative endodontics. This narrative review covers the fundamentals of (1) the disease process of apical periodontitis; (2) the influence and challenges of regeneration in immature roots; (3) the introduction of and crosstalk between mesenchymal stem cells and macrophages; (4) 3D cell culture techniques and their applications for studying cellular interactions in the pulpal and periapical tissues; (5) current investigations on cellular interactions in regenerative endodontics; and, lastly, (6) the dental-pulp organoid developed for regenerative endodontics.

Tissue Engineering Challenges for Cultivated Meat to Meet the Real Demand of a Global Market

Cultivated meat (CM) technology has the potential to disrupt the food industry-indeed, it is already an inevitable reality. This new technology is an alternative to solve the environmental, health and ethical issues associated with the demand for meat products. The global market longs for biotechnological improvements for the CM production chain. CM, also known as cultured, cell-based, lab-grown, in vitro or clean meat, is obtained through cellular agriculture, which is based on applying tissue engineering principles. In practice, it is first necessary to choose the best cell source and type, and then to furnish the necessary nutrients, growth factors and signalling molecules via cultivation media. This procedure occurs in a controlled environment that provides the surfaces necessary for anchor-dependent cells and offers microcarriers and scaffolds that favour the three-dimensional (3D) organisation of multiple cell types. In this review, we discuss relevant information to CM production, including the cultivation process, cell sources, medium requirements, the main obstacles to CM production (consumer acceptance, scalability, safety and reproducibility), the technological aspects of 3D models (biomaterials, microcarriers and scaffolds) and assembly methods (cell layering, spinning and 3D bioprinting). We also provide an outlook on the global CM market. Our review brings a broad overview of the CM field, providing an update for everyone interested in the topic, which is especially important because CM is a multidisciplinary technology.

Deciphering Stem Cell from Apical Papilla - Macrophage Choreography using a Novel 3D Organoid System

INTRODUCTION

Immune cell - mesenchymal stem cell crosstalk modulates the process of repair and regeneration. In this study, a novel heterogenous cell containing matrix based three-dimensional (3D) tissue-construct was employed to study the interactions between stem cells from apical papilla (SCAP) and macrophage for a comprehensive understanding on the cellular signalling mechanisms guiding inflammation and repair.

METHODS

SCAP and macrophages were seeded with collagen in 3D printed molds to generate self-assembled tissue-constructs, which were exposed to three conditions: no stimulation, lipopolysaccharide (LPS), and interleukin-4 (IL-4) from 0 to 14 days. Specimens from each group were evaluated for cellular interactions, inflammatory mediators (IL-1β, TNF-α, MDC, MIP-1β, MCP-1, IL-6, IL-8, TGF-β1, IL-1RA, IL-10), expression of surface markers (CD80, 206), transcription factors (pSTAT1, pSTAT6) and SCAP differentiation markers (DSPP, DMP-1, and alizarin red) using confocal laser scanning microscopy and multiplex cytokine profiling from 2 to 14 days.

RESULTS

SCAP and macrophages displayed a cytokine-mediated interaction and differentiation characteristics. The increased pro-inflammatory cytokines/chemokines: IL-1β, TNF-α, MDC and MIP-1β in the earlier phase followed by the higher ratio of pSTAT6/pSTAT1 and decreased CD206 (p<0.05), indicated a distinct polarization behavior in macrophages during repair in LPS group. Conversely, the equal ratio of pSTAT6/pSTAT1, late increase in CD206 and amplified secretion of IL-1RA, IL-10 and TGF-β1 (p<0.05) in the anti-inflammatory environment, directed alternative macrophage polarization, promoting SCAP differentiation and tissue modeling in IL-4 group.

CONCLUSIONS

The novel 3D organoid system developed in this study allowed a comprehensive analysis of the SCAP-macrophage interactions during inflammation and healing, providing a deeper insight on the periapical dynamics of immature tooth.

Heterogeneous spheroids with tunable interior morphologies by droplet-based microfluidics

Heterogeneous spheroids that mimic the complex three-dimensional environment of natural tissues are needed in various biomedical applications. Geometric cues from cellular matrix play invaluable roles in governing cell behavior and phenotype. However, the structural complexity of interior morphologies of spheroids is currently limited due to poor spatial resolution of positioning/orientation of cellular constructs. Here, a coaxial capillary microfluidic device is developed to generate gelatin methacrylate (GelMA) microspheres with tunable dimensions and interior morphologies, such as core-shell, or microspheres with interior undulated wavy, or spiral canals, by manipulating the two-phase flow of hydrogel precursor solution and methylcellulose solution. The formation of diverse and exquisite interior morphologies is caused by the interacting viscous instabilities of the two-phase flow in the microfluidic system, followed by water-in-oil emulsion and photo-initiated polymerization. Polyethylene glycol diacrylate (PEGDA) is incorporated into the GelMA solution to tune the mechanical properties of the fabricated microspheres, and an optimized concentration of PEGDA is confirmed by evaluating the in vitro proliferation and vascularization of human umbilical endothelial cells. Further, a heterogeneous spheroid with spiral blood vessel lumen is constructed to demonstrate the versatility and potential of the proposed droplet-based microfluidic approach for building functional tissue constructs.

Engineering a novel stem cells from apical papilla - macrophages organoid for regenerative endodontics

INTRODUCTION

Three-dimension (3D) tissue-construct with a heterogeneous cell population is critical to understand the interactions between immune cells and stem cells from apical papilla (SCAP) in the periapical region for developing treatment strategies in regenerative endodontics. This study aims to develop and characterize a 3D tissue-construct with binary cell system for studying the interactions between SCAP and macrophages in presence of lipopolysaccharide (LPS - pro-inflammatory) and interleukin-4 (IL-4 - anti-inflammatory) environments.

METHODS

SCAP and macrophages were seeded in the 3D printed dumbbell-shaped molds to generate tissue-constructs with binary cell population. Two experimental (LPS and IL-4) and control (non-stimulation) conditions were applied to the tissue-constructs to determine the characteristics of the tissue-construct, volume of viable cells and their morphology using a confocal laser scanning microscopy from 0 to 7 days period. Experiments were conducted in triplicates and data were analyzed with trend analysis and two-way analysis of variance at the significance of p < 0.05.

RESULTS

The tissue-constructs revealed distinct SCAP-macrophage interaction in pro-/anti-inflammatory environments. SCAP displayed characteristic self-organization as a cap-shaped structure in the tissue-construct. The growth of cells and cell-to-cell as well as cell-to-matrix interactions resulted in 70% and 30% decreased dimension of the tissue graft on the SCAP side and macrophage side respectively at day 7 (p < 0.0001). The tissue environments influenced macrophages-SCAP interactions, resulting in altered viable cell volume (p < 0.05), morphology and structural organization.

CONCLUSIONS

This study developed and characterized an apical papilla organoid in a 3D collagen based tissue-construct for studying SCAP-macrophage crosstalk in tissue regeneration as well as repair.

Bioengineering Outlook on Cultivated Meat Production

Cultured meat (also referred to as cultivated meat or cell-based meat)—CM—is fabricated through the process of cellular agriculture (CA), which entails application of bioengineering, i.e., tissue engineering (TE) principles to the production of food. The main TE principles include usage of cells, grown in a controlled environment provided by bioreactors and cultivation media supplemented with growth factors and other needed nutrients and signaling molecules, and seeded onto the immobilization elements—microcarriers and scaffolds that provide the adhesion surfaces necessary for anchor-dependent cells and offer 3D organization for multiple cell types. Theoretically, many solutions from regenerative medicine and biomedical engineering can be applied in CM-TE, i.e., CA. However, in practice, there are a number of specificities regarding fabrication of a CM product that needs to fulfill not only the majority of functional criteria of muscle and fat TE, but also has to possess the sensory and nutritional qualities of a traditional food component, i.e., the meat it aims to replace. This is the reason that bioengineering aimed at CM production needs to be regarded as a specific scientific discipline of a multidisciplinary nature, integrating principles from biomedical engineering as well as from food manufacturing, design and development, i.e., food engineering. An important requirement is also the need to use as little as possible of animal-derived components in the whole CM bioprocess. In this review, we aim to present the current knowledge on different bioengineering aspects, pertinent to different current scientific disciplines but all relevant for CM engineering, relevant for muscle TE, including different cell sources, bioreactor types, media requirements, bioprocess monitoring and kinetics and their modifications for use in CA, all in view of their potential for efficient CM bioprocess scale-up. We believe such a review will offer a good overview of different bioengineering strategies for CM production and will be useful to a range of interested stakeholders, from students just entering the CA field to experienced researchers looking for the latest innovations in the field.

Scaffolding Biomaterials for 3D Cultivated Meat: Prospects and Challenges

Cultivating meat from stem cells rather than by raising animals is a promising solution to concerns about the negative externalities of meat production. For cultivated meat to fully mimic conventional meat's organoleptic and nutritional properties, innovations in scaffolding technology are required. Many scaffolding technologies are already developed for use in biomedical tissue engineering. However, cultivated meat production comes with a unique set of constraints related to the scale and cost of production as well as the necessary attributes of the final product, such as texture and food safety. This review discusses the properties of vertebrate skeletal muscle that will need to be replicated in a successful product and the current state of scaffolding innovation within the cultivated meat industry, highlighting promising scaffold materials and techniques that can be applied to cultivated meat development. Recommendations are provided for future research into scaffolds capable of supporting the growth of high-quality meat while minimizing production costs. Although the development of appropriate scaffolds for cultivated meat is challenging, it is also tractable and provides novel opportunities to customize meat properties.

Recent Advances in Multicellular Tumor Spheroid Generation for Drug Screening

Multicellular tumor spheroids (MCTs) have been employed in biomedical fields owing to their advantage in designing a three-dimensional (3D) solid tumor model. For controlling multicellular cancer spheroids, mimicking the tumor extracellular matrix (ECM) microenvironment is important to understand cell-cell and cell-matrix interactions. In drug cytotoxicity assessments, MCTs provide better mimicry of conventional solid tumors that can precisely represent anticancer drug candidates' effects. To generate incubate multicellular spheroids, researchers have developed several 3D multicellular spheroid culture technologies to establish a research background and a platform using tumor modelingvia advanced materials science, and biosensing techniques for drug-screening. In application, drug screening was performed in both invasive and non-invasive manners, according to their impact on the spheroids. Here, we review the trend of 3D spheroid culture technology and culture platforms, and their combination with various biosensing techniques for drug screening in the biomedical field.

In vitro three-dimensional cell cultures for bone sarcomas

Bone sarcomas are rare tumour entities that arise from the mesenchyme most of which are highly heterogeneous at the cellular, genetic and epigenetic levels. The three main types are osteosarcoma, Ewing sarcoma, and chondrosarcoma. These oncological entities are characterised by high morbidity and mortality and an absence of significant therapeutic improvement in the last four decades. In the field of oncology, in vitro cultures of cancer cells have been extensively used for drug screening unfortunately with limited success. Indeed, despite the massive knowledge acquired from conventional 2D culture methods, scientific community has been challenged by the loss of efficacy of drugs when moved to clinical trials. The recent explosion of new 3D culture methods is paving the way to more relevant in vitro models mimicking the in vivo tumour environment (e.g. bone structure) with biological responses close to the in vivo context. The present review gives a brief overview of the latest advances of the 3D culture methods used for studying primary bone sarcomas.

The utility of biomedical scaffolds laden with spheroids in various tissue engineering applications

A spheroid is a complex, spherical cellular aggregate supporting cell-cell and cell-matrix interactions in an environment that mimics the real-world situation. In terms of tissue engineering, spheroids are important building blocks that replace two-dimensional cell cultures. Spheroids replicate tissue physiological activities. The use of spheroids with/without scaffolds yields structures that engage in desired activities and replicate the complicated geometry of three-dimensional tissues. In this mini-review, we describe conventional and novel methods by which scaffold-free and scaffolded spheroids may be fabricated and discuss their applications in tissue regeneration and future perspectives.

An in vitro model using spheroids-laden nanofibrous structures for attaining high degree of myoblast alignment and differentiation

A spheroid is an aggregation of single cells with structural and functional characteristics similar to those of 3D native tissues, and it has been utilized as one of the typical in vitro three-dimensional (3D) cell models. Scaffold-free spheroids provide outstanding reflection of tissue complexity in a 3D in vivo-like environment, but they can neither fabricate realistic macroscale 3D complex structures without avoiding necrosis nor receive direct external stimuli (i.e., stimuli from mechanical or topographical cues). Here, we propose a spheroid-laden electrospinning process to obtain in vitro model achieved using the synergistic effect of the unique bioactive components provided by the spheroids and stimulating effects provided by the aligned nanofibers.

Methods: To show the functional activity of the spheroid-laden structures, we used myoblast-spheroids to obtain skeletal muscle, comprising highly aligned myotubes, utilizing an uniaxially arranged topographical cue. The spheroid-electrospinning was used to align spheroids directly by embedding them in aligned alginate nanofibers, which were controlled with various materials and processing parameters.

Results: The spheroids laden in the alginate nanofibers showed high cell viability (>90%) and was compared with that of a cell-laden alginate nanofiber that was electrospun with single cells. Consequently, the spheroids laden in the aligned nanofibers showed a significantly higher degree of myotube formation and maturation.

Conclusion: Results suggested that the in vitro model using electrospun spheroids could potentially be employed to understand myogenic responses for various in vitro drug tests.

Tissue-in-a-Tube: three-dimensional in vitro tissue constructs with integrated multimodal environmental stimulation

Three-dimensional (3D) in vitro tissue models are superior to two-dimensional (2D) cell cultures in replicating natural physiological/pathological conditions by recreating the cellular and cell-matrix interactions more faithfully. Nevertheless, current 3D models lack either the rich multicellular environment or fail to provide appropriate biophysical stimuli both of which are required to properly recapitulate the dynamic in vivo microenvironment of tissues and organs. Here, we describe the rapid construction of multicellular, tubular tissue constructs termed Tissue-in-a-Tube using self-assembly process in tubular molds with the ability to incorporate a variety of biophysical stimuli such as electrical field, mechanical deformation, and shear force of the fluid flow. Unlike other approaches, this method is simple, requires only oxygen permeable silicone tubing that molds the tissue construct and thin stainless-steel pins inserted in it to anchor the construct and could be used to provide electrical and mechanical stimuli, simultaneously. The annular region between the tissue construct and the tubing is used for perfusion. Highly stable, macroscale, and robust constructs anchored to the pins form as a result of self-assembly of the extracellular matrix (ECM) and cells in the bioink that is filled into the tubing. We demonstrate patterning of grafts containing cell types in the constructs in axial and radial modes with clear interface and continuity between the layers. Different environmental factors affecting cell behavior such as compactness of the structure and size of the constructs can be controlled through parameters such as initial cell density, ECM content, tubing size, as well as the distance between anchor pins. Using connectors, network of tubing can be assembled to create complex macrostructured tissues (centimeters length) such as fibers that are bifurcated or columns with different axial thicknesses which can then be used as building blocks for biomimetic constructs or tissue regeneration. The method is versatile and compatible with various cell types including endothelial, epithelial, skeletal muscle cells, osteoblast cells, and neuronal cells. As an example, long mature skeletal muscle and neuronal fibers as well as bone constructs were fabricated with cellular alignment dictated by the applied electrical field. The versatility, speed, and low cost of this method is suited for widespread application in tissue engineering and regenerative medicine.

Void-free 3D Bioprinting for In-situ Endothelialization and Microfluidic Perfusion

Two major challenges of 3D bioprinting are the retention of structural fidelity and efficient endothelialization for tissue vascularization. We address both of these issues by introducing a versatile 3D bioprinting strategy, in which a templating bioink is deposited layer-by-layer alongside a matrix bioink to establish void-free multimaterial structures. After crosslinking the matrix phase, the templating phase is sacrificed to create a well-defined 3D network of interconnected tubular channels. This void-free 3D printing (VF-3DP) approach circumvents the traditional concerns of structural collapse, deformation and oxygen inhibition, moreover, it can be readily used to print materials that are widely considered "unprintable". By pre-loading endothelial cells into the templating bioink, the inner surface of the channels can be efficiently cellularized with a confluent endothelial layer. This in-situ endothelialization method can be used to produce endothelium with a far greater uniformity than can be achieved using the conventional post-seeding approach. This VF-3DP approach can also be extended beyond tissue fabrication and towards customized hydrogel-based microfluidics and self-supported perfusable hydrogel constructs.

Development and characterization of cancer stem cell-based tumoroids as an osteosarcoma model

Three-dimensional (3D) cancer tumor models are becoming vital approaches for high-throughput drug screening, drug targeting, development of novel theranostic systems, and personalized medicine. Yet, it is becoming more evident that the tumor progression and metastasis is fueled by a subpopulation of stem-like cells within the tumor that are also called cancer stem cells (CSCs). This study aimed to develop a tumoroid model using CSCs. For this purpose CD133⁺ cells were isolated from SaOS-2 osteosarcoma cell line with magnetic-activated cell sorting. To evaluate tumoroid formation ability, the cells were incubated in different cell numbers in agar gels produced by 3D Petri Dish® method. Subsequently, CD133⁺ cells and CD133^- cells were co-cultured to investigate CD133⁺ cell localization in tumoroids. The characterization of tumoroids was performed using Live&Dead staining, immunohistochemistry, and quantitative polymerase chain reaction analysis. The results showed that, CD133⁺ , CD133^- and SaOS-2 cells were all able to form 3D tumoroids regardless of the initial cell number, but, while 72 hr were needed for CD133⁺ cells to self-assemble, 24 hr were enough for CD133^- and SaOS-2 cells. CD133⁺ cells were located within tumoroids randomly with high cell viability. Finally, when compared to two-dimensional (2D) cultures, there were 5.88, 4.14, 6.95, and 1.68-fold higher messenger RNA expressions for Sox2, OCT3/4, Nanog, and Nestin, respectively, in CD133⁺ cells that were cultured within 3D tumoroids, showing longer maintenance of stem cell phenotype in 3D, that can allow more relevant screening and targeting efficiency in pharmaceutical testing. It was concluded that CSC-based tumoroids are propitious as 3D tumor models to fill the gap between conventional 2D in vitro culture and in vivo animal experiments for cancer research.

A 3D Self-Assembled In Vitro Model to Simulate Direct and Indirect Interactions between Adipocytes and Skeletal Muscle Cells

The molecular mechanisms of the development and progression of diabetes and obesity involve complex interactions between adipocytes and skeletal muscle cells. Although 2D in-vitro models are the gold standard for the mechanistic study of such behaviors, they do not recreate the complexity and dynamics of the interactions between the cell types involved. Alternatively, animal models are used but are expensive, difficult to visualize or analyze, are not completely representative of human physiology or genetic background, and have associated ethical considerations. 3D co-culture systems can be complementary to these approaches. Here, using a newly developed 3D biofabrication method, adipocytes and myoblasts are positioned precisely either in direct physical contact or in close proximity such that the paracrine effects could be systematically studied. Suitable protocols for growth and differentiation of both cells in the co-culture system is also developed. Cells show more restrained lipid and protein production in 3D systems compared to 2D ones and adipocytes show more lipolysis in indirect contact with myoblasts as response to drug treatment. These findings emphasize importance of physical contact between cells that have been overlooked in co-culture systems using transwell inserts and can be used in studies for the development of anti-obesity drugs.

Fibroblasts Accelerate Formation and Improve Reproducibility of 3D Cellular Structures Printed with Magnetic Assistance

Fibroblasts (mouse, NIH/3T3) are combined with MDA-MB-231 cells to accelerate the formation and improve the reproducibility of 3D cellular structures printed with magnetic assistance. Fibroblasts and MDA-MB-231 cells are cocultured to produce 12.5 : 87.5, 25 : 75, and 50 : 50 total population mixtures. These mixtures are suspended in a cell medium containing a paramagnetic salt, Gd-DTPA, which increases the magnetic susceptibility of the medium with respect to the cells. A 3D monotypic MDA-MB-231 cellular structure is printed within 24 hours with magnetic assistance, whereas it takes 48 hours to form a similar structure through gravitational settling alone. The maximum projected areas and circularities, and cellular ATP levels of the printed structures are measured for 336 hours. Increasing the relative amounts of the fibroblasts mixed with the MDA-MB-231 cells decreases the time taken to form the structures and improves their reproducibility. Structures produced through gravitational settling have larger maximum projected areas and cellular ATP, but are deemed less reproducible. The distribution of individual cell lines in the cocultured 3D cellular structures shows that printing with magnetic assistance yields 3D cellular structures that resemble in vivo tumors more closely than those formed through gravitational settling. The results validate our hypothesis that (1) fibroblasts act as a "glue" that supports the formation of 3D cellular structures, and (2) the structures are produced more rapidly and with greater reproducibility with magnetically assisted printing than through gravitational settling alone. Printing of 3D cellular structures with magnetic assistance has applications relevant to drug discovery, lab-on-chip devices, and tissue engineering.