Vascularization of self-assembled peptide scaffolds for spinal cord injury repair

Biomaterial strategies for regulating the neuroinflammatory response

Injury and disease in the central nervous system (CNS) can result in a dysregulated inflammatory environment that inhibits the repair of functional tissue. Biomaterials present a promising approach to tackle this complex inhibitory environment and modulate the mechanisms involved in neuroinflammation to halt the progression of secondary injury and promote the repair of functional tissue. In this review, we will cover recent advances in biomaterial strategies, including nanoparticles, hydrogels, implantable scaffolds, and neural probe coatings, that have been used to modulate the innate immune response to injury and disease within the CNS. The stages of inflammation following CNS injury and the main inflammatory contributors involved in common neurodegenerative diseases will be discussed, as understanding the inflammatory response to injury and disease is critical for identifying therapeutic targets and designing effective biomaterial-based treatment strategies. Biomaterials and novel composites will then be discussed with an emphasis on strategies that deliver immunomodulatory agents or utilize cell-material interactions to modulate inflammation and promote functional tissue repair. We will explore the application of these biomaterial-based strategies in the context of nanoparticle- and hydrogel-mediated delivery of small molecule drugs and therapeutic proteins to inflamed nervous tissue, implantation of hydrogels and scaffolds to modulate immune cell behavior and guide axon elongation, and neural probe coatings to mitigate glial scarring and enhance signaling at the tissue-device interface. Finally, we will present a future outlook on the growing role of biomaterial-based strategies for immunomodulation in regenerative medicine and neuroengineering applications in the CNS.

Osteopontin Promotes Angiogenesis in the Spinal Cord and Exerts a Protective Role Against Motor Function Impairment and Neuropathic Pain After Spinal Cord Injury

STUDY DESIGN

Basic science study using a hemisection spinal cord injury (SCI) model.

OBJECTIVE

We sought to assess the effect of blocking osteopontin (OPN) upregulation on motor function recovery and pain behavior after SCI and to further investigate the possible downstream target of OPN in the injured spinal cord.

SUMMARY OF BACKGROUND DATA

OPN is a noncollagenous extracellular matrix protein widely expressed across different tissues. Its expression substantially increases following SCI. A previous study suggested that this protein might contribute to locomotor function recovery after SCI. However, its neuroprotective potential was not fully explored, nor were the underlying mechanisms.

MATERIALS AND METHODS

We constructed a SCI mouse model and analyzed the expression of OPN at different time points and the particular cell distribution in the injured spinal cord. Then, we blocked OPN upregulation with lentivirus-delivering siRNA targeting OPN specifically and examined its effect on motor function impairment and neuropathic pain after SCI. The underlying mechanisms were explored in the OPN-knockdown mice model and cultured vascular endothelial cells.

RESULTS

The proteome study revealed that OPN was the most dramatically increased protein following SCI. OPN in the spinal cord was significantly increased three weeks after SCI. Suppressing OPN upregulation through siRNA exacerbated motor function impairment and neuropathic pain. In addition, SCI resulted in an increase in vascular endothelial growth factor (VEGF), AKT phosphorylation, and angiogenesis within the spinal cord, all of which were curbed by OPN reduction. Similarly, OPN knockdown suppressed VEGF expression, AKT phosphorylation, cell migration, invasion, and angiogenesis in cultured vascular endothelial cells.

CONCLUSION

OPN demonstrates a protective influence against motor function impairment and neuropathic pain following SCI. This phenomenon may result from the proangiogenetic effect of OPN, possibly due to activation of the VEGF and/or AKT pathways.

Tissue regeneration properties of hydrogels derived from biological macromolecules: A review

The successful tissue engineering depends on the development of biologically active scaffolds that possess optimal characteristics to effectively support cellular functions, maintain structural integrity and aid in tissue regeneration. Hydrogels have emerged as promising candidates in tissue regeneration due to their resemblance to the natural extracellular matrix and their ability to support cell survival and proliferation. The integration of hydrogel scaffold into the polymer has a variable impact on the pseudo extracellular environment, fostering cell growth/repair. The modification in size, shape, surface morphology and porosity of hydrogel scaffolds has consequently paved the way for addressing diverse challenges in the tissue engineering process such as tissue architecture, vascularization and simultaneous seeding of multiple cells. The present review provides a comprehensive update on hydrogel production using natural and synthetic biomaterials and their underlying mechanisms. Furthermore, it delves into the application of hydrogel scaffolds in tissue engineering for cardiac tissues, cartilage tissue, adipose tissue, nerve tissue and bone tissue. Besides, the present article also highlights various clinical studies, patents, and the limitations associated with hydrogel-based scaffolds in recent times.

Smart Hydrogels for Tissue Regeneration

The rapid growth in the portion of the aging population has led to a consequent increase in demand for biomedical hydrogels, together with an assortment of challenges that need to be overcome in this field. Smart hydrogels can autonomously sense and respond to the physiological/pathological changes of the tissue microenvironment and continuously adapt the response according to the dynamic spatiotemporal shifts in conditions. This along with other favorable properties, make smart hydrogels excellent materials for employing toward improving the precision of treatment for age-related diseases. The key factor during the smart hydrogel design is on accurately identifying the characteristics of natural tissues and faithfully replicating the composition, structure, and biological functions of these tissues at the molecular level. Such hydrogels can accurately sense distinct physiological and external factors such as temperature and biologically active molecules, so they may in turn actively and promptly adjust their response, by regulating their own biological effects, thereby promoting damaged tissue repair. This review summarizes the design strategies employed in the creation of smart hydrogels, their response mechanisms, as well as their applications in field of tissue engineering; and concludes by briefly discussing the relevant challenges and future prospects.

Injectable Hydrogel System Incorporating Black Phosphorus Nanosheets and Tazarotene Drug for Enhanced Vascular and Nerve Regeneration in Spinal Cord Injury Repair

Spinal cord injury (SCI) often leads to cell death, vascular disruption, axonal signal interruption, and permanent functional damage. Currently, there are no clearly effective therapeutic options available for SCI. Considering the inhospitable SCI milieu typified by ischemia, hypoxia, and restricted neural regeneration, a novel injectable hydrogel system containing conductive black phosphorus (BP) nanosheets within a lipoic acid-modified chitosan hydrogel matrix (LAMC) is explored. The incorporation of tannic acid (TA)-modified BP nanosheets (BP@TA) into the LAMC hydrogel matrix significantly improved its conductivity. Further, by embedding a bicyclodextrin-conjugated tazarotene drug, the hydrogel showcased amplified angiogenic potential in vitro. In a rat model of complete SCI, implantation of LAMC/BP@TA hydrogel markedly improved the recovery of motor function. Immunofluorescence evaluations confirmed that the composite hydrogel facilitated endogenous angiogenesis and neurogenesis at the injury site. Collectively, this work elucidates an innovative drug-incorporated hydrogel system enriched with BP, underscoring its potential to foster vascular and neural regeneration.

Biomaterials and Cell Therapy Combination in Central Nervous System Treatments

Current pharmacological and surgical therapies for the central nervous system (CNS) show a limited capacity to reduce the damage progression; that together with the intrinsic limited capability of the CNS to regenerate greatly reduces the hopes of recovery. Among all the therapies proposed, the tissue engineering strategies supplemented with therapeutic stem cells remain the most promising. Neural tissue engineering strategies are based on the development of devices presenting optimal physical, chemical, and mechanical properties which, once inserted in the injured site, can support therapeutic cells, limiting the effect of a hostile environment and supporting regenerative processes. Thus, this review focuses on the employment of hydrogel and nanofibrous scaffolds supplemented with stem cells as promising therapeutic tools for the central and peripheral nervous systems in preclinical and clinical applications.

Harnessing Natural Polymers for Nano-Scaffolds in Bone Tissue Engineering: A Comprehensive Overview of Bone Disease Treatment

Numerous surgeries are carried out to replace tissues that have been harmed by an illness or an accident. Due to various surgical interventions and the requirement of bone substitutes, the emerging field of bone tissue engineering attempts to repair damaged tissues with the help of scaffolds. These scaffolds act as template for bone regeneration by controlling the development of new cells. For the creation of functional tissues and organs, there are three elements of bone tissue engineering that play very crucial role: cells, signals and scaffolds. For the achievement of these aims, various types of natural polymers, like chitosan, chitin, cellulose, albumin and silk fibroin, have been used for the preparation of scaffolds. Scaffolds produced from natural polymers have many advantages: they are less immunogenic as well as being biodegradable, biocompatible, non-toxic and cost effective. The hierarchal structure of bone, from microscale to nanoscale, is mostly made up of organic and inorganic components like nanohydroxyapatite and collagen components. This review paper summarizes the knowledge and updates the information about the use of natural polymers for the preparation of scaffolds, with their application in recent research trends and development in the area of bone tissue engineering (BTE). The article extensively explores the related research to analyze the advancement of nanotechnology for the treatment of bone-related diseases and bone repair.

Self-Assembled Peptide Hydrogels in Regenerative Medicine

Regenerative medicine is a complex discipline that is becoming a hot research topic. Skin, bone, and nerve regeneration dominate current treatments in regenerative medicine. A new type of drug is urgently needed for their treatment due to their high vulnerability to damage and weak self-repairing ability. A self-assembled peptide hydrogel is a good scaffolding material in regenerative medicine because it is similar to the cytoplasmic matrix environment; it promotes cell adhesion, migration, proliferation, and division; and its degradation products are natural and harmless proteins. However, fewer studies have examined the specific mechanisms of self-assembled peptide hydrogels in promoting tissue regeneration. This review summarizes the applications and mechanisms of self-assembled short peptide and peptide hydrogels in skin, bone, and neural healing to improve their applications in tissue healing and regeneration.

Open-Spaced Ridged Hydrogel Scaffolds Containing TiO2-Self-Assembled Monolayer of Phosphonates Promote Regeneration and Recovery Following Spinal Cord Injury

The spinal cord has a poor ability to regenerate after an injury, which may be due to cell loss, cyst formation, inflammation, and scarring. A promising approach to treating a spinal cord injury (SCI) is the use of biomaterials. We have developed a novel hydrogel scaffold fabricated from oligo(poly(ethylene glycol) fumarate) (OPF) as a 0.08 mm thick sheet containing polymer ridges and a cell-attractive surface on the other side. When the cells are cultured on OPF via chemical patterning, the cells attach, align, and deposit ECM along the direction of the pattern. Animals implanted with the rolled scaffold sheets had greater hindlimb recovery compared to that of the multichannel scaffold control, which is likely due to the greater number of axons growing across it. The immune cell number (microglia or hemopoietic cells: 50-120 cells/mm² in all conditions), scarring (5-10% in all conditions), and ECM deposits (Laminin or Fibronectin: approximately 10-20% in all conditions) were equal in all conditions. Overall, the results suggest that the scaffold sheets promote axon outgrowth that can be guided across the scaffold, thereby promoting hindlimb recovery. This study provides a hydrogel scaffold construct that can be used in vitro for cell characterization or in vivo for future neuroprosthetics, devices, or cell and ECM delivery.

A hyaluronic acid/silk fibroin/poly-dopamine-coated biomimetic hydrogel scaffold with incorporated neurotrophin-3 for spinal cord injury repair

Bio-factor stimulation is essential for axonal regeneration in the central nervous system. Thus, persistent and efficient factor delivery in the local microenvironment is an ideal strategy for spinal cord injury repair. We developed a biomimetic hydrogel scaffold to load biofactors in situ and release them in a controlled way as a promising therapeutic modality. Hyaluronic acid and silk fibroin were cross-linked as the basement of the scaffolds, and poly-dopamine coating was used to further increase the loading of factors and endow the hydrogel scaffolds with ideal physical and chemical properties and proper biocompatibility. Notably, neurotrophin-3 release from the hydrogel scaffolds was prolonged to 28 days. A spinal cord injury model was constructed for hydrogel scaffold transplantation. After eight weeks, significant NF200-positive nerve fibers were observed extending across the glial scar to the center of the injured area. Due to the release of neurotrophin-3, spinal cord regeneration was enhanced, and the cavity area of the injury graft site and inflammation associated with CD68 positive cells were reduced, which led to a significant improvement in hind limb motor function. The results show that the hyaluronic acid/silk fibroin/poly-dopamine-coated biomimetic hydrogel scaffold achieved locally slow release of neurotrophin-3, thus facilitating the regeneration of injured spinal cord. STATEMENT OF SIGNIFICANCE: Hydrogels have received great attention in spinal cord regeneration. Current research has focused on more efficient and controlled release of bio-factors. Here, we adopted a mussel-inspired strategy to functionalize the hyaluronic acid/silk fibroin hydrogel scaffold to increase the load of neurotrophin-3 and extend the release time. The hydrogel scaffolds have ideal physiochemical properties, proper release rate, and biocompatibility. Owing to the continuous neurotrophin-3 release from implanted scaffolds, cavity formation is reduced, inflammation alleviated, and spinal cord regeneration enhanced, indicating great potential for bio-factor delivery in soft tissue regeneration applications.

Self-assembled peptide-substance P hydrogels alleviate inflammation and ameliorate the cartilage regeneration in knee osteoarthritis

BACKGROUND

Self-assembled peptide (SAP)-substance P (SP) hydrogels can be retained in the joint cavity longer than SP alone, and they can alleviate inflammation and ameliorate cartilage regeneration in knee osteoarthritis (OA). We conducted a preclinical study using diverse animal models of OA and an in vitro study using human synoviocytes and patient-derived synovial fluids to demonstrate the effect of SAP-SP complex on the inflammation and cartilage regeneration.

METHODS

Surgical induction OA model was prepared with New Zealand white female rabbits and chemical induction, and naturally occurring OA models were prepared using Dunkin Hartely female guinea pigs. The SAP-SP complex or control (SAP, SP, or saline) was injected into the joint cavities in each model. We performed micro-computed tomography (Micro-CT) analysis, histological evaluation, immunofluorescent analysis, and terminal deoxynucleotidyl transferase deoxyuridine triphosphate nick-end labeling (TUNEL) assay and analyzed the recruitment of intrinsic mesenchymal stem cells (MSCs), macrophage activity, and inflammatory cytokine in each OA model. Human synoviocytes were cultured in synovial fluid extracted from human OA knee joints injected with SAP-SP complexes or other controls. Proliferative capacity and inflammatory cytokine levels were analyzed.

RESULTS

Alleviation of inflammation, inhibition of apoptosis, and enhancement of intrinsic MSCs have been established in the SAP-SP group in diverse animal models. Furthermore, the inflammatory effects on human samples were examined in synoviocytes and synovial fluid from patients with OA. In this study, we observed that SAP-SP showed anti-inflammatory action in OA conditions and increased cartilage regeneration by recruiting intrinsic MSCs, inhibiting progression of OA.

CONCLUSIONS

These therapeutic effects have been validated in diverse OA models, including rabbits, Dunkin Hartley guinea pigs, and human synoviocytes. Therefore, we propose that SAP-SP may be an effective injectable therapeutic agent for treating OA. In this manuscript, we report a preclinical study of novel self-assembled peptide (SAP)-substance P (SP) hydrogels with diverse animal models and human synoviocytes and it displays anti-inflammatory effects, apoptosis inhibition, intrinsic mesenchymal stem cells recruitments and cartilage regeneration.

Matching mechanical heterogeneity of the native spinal cord augments axon infiltration in 3D-printed scaffolds

Scaffolds delivered to injured spinal cords to stimulate axon connectivity often match the anisotropy of native tissue using guidance cues along the rostral-caudal axis, but current approaches do not mimic the heterogeneity of host tissue mechanics. Although white and gray matter have different mechanical properties, it remains unclear whether tissue mechanics also vary along the length of the cord. Mechanical testing performed in this study indicates that bulk spinal cord mechanics do differ along anatomical level and that these differences are caused by variations in the ratio of white and gray matter. These results suggest that scaffolds recreating the heterogeneity of spinal cord tissue mechanics must account for the disparity between gray and white matter. Digital light processing (DLP) provides a means to mimic spinal cord topology, but has previously been limited to printing homogeneous mechanical properties. We describe a means to modify DLP to print scaffolds that mimic spinal cord mechanical heterogeneity caused by variation in the ratio of white and gray matter, which improves axon infiltration compared to controls exhibiting homogeneous mechanical properties. These results demonstrate that scaffolds matching the mechanical heterogeneity of white and gray matter improve the effectiveness of biomaterials transplanted within the injured spinal cord.

Self-Assembling Peptide SCIBIOIII Hydrogel for Three-Dimensional Cell Culture That Promotes Wound Healing in Diabetic Mice

An important clinical challenge is improving the healing rate of diabetic chronic wounds, and developing new approaches that can promote chronic wound healing is essential. A new biomaterial that has demonstrated great potential for tissue regeneration and repair is self-assembling peptides (SAPs); however, they have been less studied for the treatment of diabetic wounds. Here, we explored the role of an SAP, SCIBIOIII, with a special nanofibrous structure mimicking the natural extracellular matrix for chronic diabetic wound repair. The results showed that the SCIBIOIII hydrogel in vitro has good biocompatibility and can create a three-dimensional (3D) culture microenvironment for the continuous growth of skin cells in a spherical state. The SCIBIOIII hydrogel in diabetic mice (in vivo) significantly improved wound closure, collagen deposition, and tissue remodeling and enhanced chronic wound angiogenesis. Thus, the SCIBIOIII hydrogel is a promising advanced biomaterial for 3D cell culture and diabetic wound tissue repair.

Construction of adhesive and bioactive silk fibroin hydrogel for treatment of spinal cord injury

Spinal cord injury (SCI) often causes severe and permanent disabilities due to the complexity of injury progression. The promising methods are generally based on tissue engineering technology using biocompatible hydrogels to achieve SCI repair. However, hydrogels are commonly incapable of close contact with the damaged spinal cord stumps and fail to support neural regeneration in SCI. Therefore, it is still a challenge to achieve stable contact with the transected nerve stumps and accelerate neural regeneration in the lesion microenvironment. Here, an in situ forming glycidyl methacrylated silk fibroin/ laminin-acrylate (SF-GMA/LM-AC) hydrogel was fabricated for SCI repair. The polymer chains formed a network quickly after ultraviolet (UV)-light trigger, in topological entanglement with the spinal cord, stitching the hydrogel and wet tissues together like a suture at the molecular scale. The SF-GMA/LM-AC hydrogel also provided a favorable environment for the growth of cells due to the incorporation of LM-AC. Compared with physical entrapment of LM, LM-AC immobilized in the hydrogel by covalent technology provided better microenvironments for neural stem cells (NSCs) growth. The repair of complete transection SCI in rats demonstrated that this hydrogel guided and promoted neural regeneration over 8 weeks, leading to hind limb locomotion recovery. This adhesive and bioactive SF-GMA/LM-AC hydrogel may open many opportunities in various therapeutic indications, including SCI. STATEMENT OF SIGNIFICANCE: Many materials have been developed for building transplanted scaffolds, but it is still a challenge to fabricate bioactive scaffolds and adhesion to wet tissues. In this study, we successfully developed an in situ forming SF-GMA/LM-AC hydrogel for SCI repair. This in situ forming hydrogel formed significant adhesion to the native spinal cord, stitching hydrogel and tissue together like a suture at the molecular scale. In addition, covalent immobilized LM-AC was used as the contact guidance biochemical cues for axonal outgrowth and had much better bioactive effects than physically entangled LM. Moreover, this universal strategy would open an avenue to fabricate adhesive and bioactive hydrogel for various disease treatments including SCI.

The Application of Biomaterials in Spinal Cord Injury

The spinal cord and the brain form the central nervous system (CNS), which is the most important part of the body. However, spinal cord injury (SCI) caused by external forces is one of the most difficult types of neurological injury to treat, resulting in reduced or even absent motor, sensory and autonomic functions. It leads to the reduction or even disappearance of motor, sensory and self-organizing nerve functions. Currently, its incidence is increasing each year worldwide. Therefore, the development of treatments for SCI is urgently needed in the clinic. To date, surgery, drug therapy, stem cell transplantation, regenerative medicine, and rehabilitation therapy have been developed for the treatment of SCI. Among them, regenerative biomaterials that use tissue engineering and bioscaffolds to transport cells or drugs to the injured site are considered the most promising option. In this review, we briefly introduce SCI and its molecular mechanism and summarize the application of biomaterials in the repair and regeneration of tissue in various models of SCI. However, there is still limited evidence about the treatment of SCI with biomaterials in the clinic. Finally, this review will provide inspiration and direction for the future study and application of biomaterials in the treatment of SCI.

Engineering multifunctional bioactive citrate-based biomaterials for tissue engineering

Developing bioactive biomaterials with highly controlled functions is crucial to enhancing their applications in regenerative medicine. Citrate-based polymers are the few bioactive polymer biomaterials used in biomedicine because of their facile synthesis, controllable structure, biocompatibility, biomimetic viscoelastic mechanical behavior, and functional groups available for modification. In recent years, various multifunctional designs and biomedical applications, including cardiovascular, orthopedic, muscle tissue, skin tissue, nerve and spinal cord, bioimaging, and drug or gene delivery based on citrate-based polymers, have been extensively studied, and many of them have good clinical application potential. In this review, we summarize recent progress in the multifunctional design and biomedical applications of citrate-based polymers. We also discuss the further development of multifunctional citrate-based polymers with tailored properties to meet the requirements of various biomedical applications.

•

Multifunctional bioactive citrate-based biomaterials have broad applications in regenerative medicine.

•

Recent advances in multifunctional design and biomedical applications of citate-based polymers are summarized.

•

Future challenge of citrate-based polymers in various biomedical applications are discussed.

3D Gradient and Linearly Aligned Magnetic Microcapsules in Nerve Guidance Conduits with Remotely Spatiotemporally Controlled Release to Enhance Peripheral Nerve Repair

Although numerous strategies have been implemented to develop nerve guidance conduits (NGCs) to treat peripheral nerve injury (PNI), functionalization of an NGC to make it remotely controllable for providing spatiotemporal modulation on in situ nerve tissues remains a challenge. In this study, a gelatin/silk (GS) hydrogel was used to develop an NGC based on its self-owned reversible thermoresponsive sol-to-gel phase transformation ability that permitted rapid three-dimensional (3D) micropatterning of the incorporated nerve growth factor (NGF)-loaded magnetic poly(lactic-co-glycolic acid) (PLGA) microcapsules (called NGF@MPs) via multiple magnetic guidance. The thermally controllable viscosity of GS enabled the rapid formation of a 3D gradient and linearly aligned distribution of NGF@MPs, leading to magnetically controlled 3D gradient release of NGF to enhance topographical nerve guidance and wound healing in PNIs. Particularly, the as-formed micropatterned hydrogel, called NGF@MPs-GS, showed corrugation topography with a pattern height H of 15 μm, which resulted in the linear axon alignment of more than 90% of cells. In addition, by an external magnetic field, spatiotemporal controllability of NGF release was obtained and permitted neurite elongation that was almost 2-fold longer than that in the group with external addition of NGF. Finally, an NGC prototype was fabricated and implanted into the injured sciatic nerve. The patterned implant, assisted by magnetic stimulation, demonstrated accelerated restoration of motor function within 14 days after implantation. It further contributed to the enhancement of axon outgrowth and remyelination after 28 days. This NGC, with controllable mechanical, biochemical, and topographical cues, is a promising platform for the enhancement of nerve regeneration.

Mesoporous polydopamine nanoparticles for sustained release of rapamycin and reactive oxygen species scavenging to synergistically accelerate neurogenesis after spinal cord injury

Spinal cord injury (SCI) is an intractable condition with complex pathological processes and poor prognosis. Reactive oxygen species (ROS) generation induced by the mammalian target of the rapamycin (mTOR) protein is one of the causes of secondary inflammation of SCI. Rapamycin (Rapa) is a pharmacological inhibitor of mTOR, which can inhibit ROS overproduction mediated by abnormal activation of the mTOR protein. Polydopamine, as a nanocarrier with excellent biological safety, has been reported to possess satisfactory ROS scavenging ability. Therefore, we designed a mesoporous polydopamine nanoparticle loaded with Rapa (mPDA@Rapa) for combination therapy, which simultaneously inhibited abnormally activated mTOR-mediated ROS production and eliminated already generated ROS. The synthesized mPDA nanoparticles could realize the effective encapsulation and sustained release of Rapa due to their mesoporous cavities and a hydrophobic benzene ring structure. In vitro experiments proved that mPDA@Rapa nanoparticles had a good ROS scavenging ability towards hydrogen peroxide and hydroxyl radicals. Furthermore, mPDA@Rapa also showed a good therapeutic effect in SCI model rats, which was evidenced by a smaller injury cavity, more coordinated hind limb movements, and a higher degree of neurogenesis and tissue regeneration. Our work provides a combined strategy to inhibit ROS overproduction and eliminate excess ROS, with potential applications not only in SCI, but also in other ROS-induced inflammations.

Oxygen gradients dictate angiogenesis but not barriergenesis in a 3D brain microvascular model

A variety of biophysical properties are known to regulate angiogenic sprouting, and in vitro systems can parse the individual effects of these factors in a controlled setting. Here, a three-dimensional brain microvascular model interrogates how variables including extracellular matrix composition, fluid shear stress, and radius of curvature affect angiogenic sprouting of cerebral endothelial cells. Tracking endothelial migration over several days reveals that application of fluid shear stress and enlarged vessel radius of curvature both attenuate sprouting. Computational modeling informed by oxygen consumption assays suggests that sprouting correlates to reduced oxygen concentration: both fluid shear stress and vessel geometry alter the local oxygen levels dictated by both ambient conditions and cellular respiration. Moreover, increasing cell density and consequently lowering the local oxygen levels yields significantly more sprouting. Further analysis reveals that the magnitude of oxygen concentration is not as important as its spatial concentration gradient: decreasing ambient oxygen concentration causes significantly less sprouting than applying an external oxygen gradient to the vessels. In contrast, barriergenesis is dictated by shear stress independent of local oxygen concentrations, suggesting that different mechanisms mediate angiogenesis and barrier formation and that angiogenic sprouting can occur without compromising the barrier. Overall, these results improve our understanding of how specific biophysical variables regulate the function and activation of cerebral vasculature, and identify spatial oxygen gradients as the driving factor of angiogenesis in the brain.

Magnetic alignment of injectable hydrogel scaffolds for spinal cord injury repair

Injectable hydrogels for cell delivery and tissue regeneration have several advantages over pre-fabricated scaffolds that require more invasive transplantation procedures, but lack the ability to implement tunable topologies. Here, we describe an approach to create patternable and injectable scaffolds using magnetically-responsive (MR) self-assembling peptide hydrogels, and validate their efficacy to promote and align axon infiltration at the site of a spinal cord injury. In vitro experiments reveal the parameters needed to align the fibers using the application of an external magnetic field. These results indicate that applying a 100-Gauss (G) field to the peptide hydrogels during polymerization causes fiber alignment as measured by electron microscopy, even in the presence of cells. In order to mimic infiltrating axons, neural progenitor cells (NPCs) are seeded on the surface of peptide hydrogels to interrogate the effects of both magnetic alignment and embedding human mesenchymal stem cells (hMSCs) in the scaffold. NPCs infiltrate peptide hydrogels seeded with hMSCs, and exhibit increased alignment and elongation in aligned gels. In order to evaluate these injectable and patternable scaffolds in vivo, hMSC-seeded peptide hydrogels are injected at the site of a contusion spinal cord injury with and without the presence of a magnetic field to align the resulting fibrous network. Measurements of axon growth and orientation as well as inflammation and glial scar formation indicate that these metrics are improved in magnetically aligned hMSC-seeded hydrogels. The results verify that MR hydrogels can dictate the orientation of infiltrating axons, providing a viable means to control the topology of injectable scaffolds.

Self-assembling peptide gels promote angiogenesis and functional recovery after spinal cord injury in rats

Spinal cord injury (SCI) leads to disruption of the blood–spinal cord barrier, hemorrhage, and tissue edema, which impair blood circulation and induce ischemia. Angiogenesis after SCI is an important step in the repair of damaged tissues, and the extent of angiogenesis strongly correlates with the neural regeneration. Various biomaterials have been developed to promote angiogenesis signaling pathways, and angiogenic self-assembling peptides are useful for producing diverse supramolecular structures with tunable functionality. RADA16 (Ac-RARADADARARADADA-NH2), which forms nanofiber networks under physiological conditions, is a self-assembling peptide that can provide mechanical support for tissue regeneration and reportedly has diverse roles in wound healing. In this study, we applied an injectable form of RADA16 with or without the neuropeptide substance P to the contused spinal cords of rats and examined angiogenesis within the damaged spinal cord and subsequent functional improvement. Histological and immunohistochemical analyses revealed that the inflammatory cell population in the lesion cavity was decreased, the vessel number and density around the damaged spinal cord were increased, and the levels of neurofilaments within the lesion cavity were increased in SCI rats that received RADA16 and RADA16 with substance P (rats in the RADA16/SP group). Moreover, real-time PCR analysis of damaged spinal cord tissues showed that IL-10 expression was increased and that locomotor function (as assessed by the Basso, Beattie, and Bresnahan (BBB) scale and the horizontal ladder test) was significantly improved in the RADA16/SP group compared to the control group. Our findings indicate that RADA16 modified with substance P effectively stimulates angiogenesis within the damaged spinal cord and is a candidate agent for promoting functional recovery post-SCI.

Delving into the recent advancements of spinal cord injury treatment: a review of recent progress

Spinal cord injury (SCI) research is a very complex field lending to why reviews of SCI literatures can be beneficial to current and future researchers. This review focuses on recent articles regarding potential modalities for the treatment and management of SCI. The modalities were broken down into four categories: neuroprotection-pharmacologic, neuroprotection-non-pharmacologic, neuroregeneration-pharmacologic, neuroregeneration-non-pharmacologic. Peer-reviewed articles were found using PubMed with search terms: "spinal cord injury", "spinal cord injury neuroregeneration", "olfactory ensheathing cells spinal cord injury", "rho-rock inhibitors spinal cord injury", "neural stem cell", "scaffold", "neural stem cell transplantation", "exosomes and SCI", "epidural stimulation SCI", "brain-computer interfaces and SCI". Most recent articles spanning two years were chosen for their relevance to the categories of SCI management and treatment. There has been a plethora of pre-clinical studies completed with their results being difficult to replicate in clinical studies. Therefore, scientists should focus on understanding and applying the results of previous research to develop more efficacious preclinical studies and clinical trials.

Bio-Scaffolds as Cell or Exosome Carriers for Nerve Injury Repair

Central and peripheral nerve injuries can lead to permanent paralysis and organ dysfunction. In recent years, many cell and exosome implantation techniques have been developed in an attempt to restore function after nerve injury with promising but generally unsatisfactory clinical results. Clinical outcome may be enhanced by bio-scaffolds specifically fabricated to provide the appropriate three-dimensional (3D) conduit, growth-permissive substrate, and trophic factor support required for cell survival and regeneration. In rodents, these scaffolds have been shown to promote axonal regrowth and restore limb motor function following experimental spinal cord or sciatic nerve injury. Combining the appropriate cell/exosome and scaffold type may thus achieve tissue repair and regeneration with safety and efficacy sufficient for routine clinical application. In this review, we describe the efficacies of bio-scaffolds composed of various natural polysaccharides (alginate, chitin, chitosan, and hyaluronic acid), protein polymers (gelatin, collagen, silk fibroin, fibrin, and keratin), and self-assembling peptides for repair of nerve injury. In addition, we review the capacities of these constructs for supporting in vitro cell-adhesion, mechano-transduction, proliferation, and differentiation as well as the in vivo properties critical for a successful clinical outcome, including controlled degradation and re-absorption. Finally, we describe recent advances in 3D bio-printing for nerve regeneration.

Anisotropic scaffolds for peripheral nerve and spinal cord regeneration

The treatment of long-gap (>10 mm) peripheral nerve injury (PNI) and spinal cord injury (SCI) remains a continuous challenge due to limited native tissue regeneration capabilities. The current clinical strategy of using autografts for PNI suffers from a source shortage, while the pharmacological treatment for SCI presents dissatisfactory results. Tissue engineering, as an alternative, is a promising approach for regenerating peripheral nerves and spinal cords. Through providing a beneficial environment, a scaffold is the primary element in tissue engineering. In particular, scaffolds with anisotropic structures resembling the native extracellular matrix (ECM) can effectively guide neural outgrowth and reconnection. In this review, the anatomy of peripheral nerves and spinal cords, as well as current clinical treatments for PNI and SCI, is first summarized. An overview of the critical components in peripheral nerve and spinal cord tissue engineering and the current status of regeneration approaches are also discussed. Recent advances in the fabrication of anisotropic surface patterns, aligned fibrous substrates, and 3D hydrogel scaffolds, as well as their in vitro and in vivo effects are highlighted. Finally, we summarize potential mechanisms underlying the anisotropic architectures in orienting axonal and glial cell growth, along with their challenges and prospects.

The combination of nanoscaffolds and stem cell transplantation: Paving a promising road for spinal cord injury regeneration

Spinal cord injury (SCI), one of the most devastating traumas, has caused long-term disability in millions of people worldwide. The pathophysiology of SCI primarily occurs in two stages classified as primary injury and secondary injury. Due to the rupture of axons and the apoptosis of neurons, patients lose their motor, sensory, and reflex functions, which also imposes a huge burden on families and society. However, traditional surgery does not facilitate neuronal regeneration. Although neural stem cells (NSCs) have the potential for multidirectional differentiation, the probability of differentiation into neurons and survival are still low. Surprisingly, the unique properties of nanotechnologies enable targeted drug delivery while reducing adverse reactions, assisting NSCs in differentiating into neurons. Here, recent studies on promising nanoscaffolds are highlighted, and their strengths and drawbacks are evaluated. Although the treatment of SCI remains fraught with challenges, the combination of nanoscaffolds and NSCs pave a promising road for SCI regeneration.

Perspective Insights to Bio-Nanomaterials for the Treatment of Neurological Disorders

The significance of biomaterials is well appreciated in nanotechnology, and its use has resulted in major advances in biomedical sciences. Although, currently, very little data is available on the clinical trial studies for treatment of neurological conditions, numerous promising advancements have been reported in drug delivery and regenerative therapies which can be applied in clinical practice. Among the commonly reported biomaterials in literature, the self-assembling peptides and hydrogels have been recognized as the most potential candidate for treatment of common neurological conditions such as Alzheimer's, Parkinson's, spinal cord injury, stroke and tumors. The hydrogels, specifically, offer advantages like flexibility and porosity, and mimics the properties of the extracellular matrix of the central nervous system. These factors make them an ideal scaffold for drug delivery through the blood-brain barrier and tissue regeneration (using stem cells). Thus, the use of biomaterials as suitable matrix for therapeutic purposes has emerged as a promising area of neurosciences. In this review, we describe the application of biomaterials, and the current advances, in treatment of statistically common neurological disorders.

From structure to application: Progress and opportunities in peptide materials development

For over 20 years, peptide materials in their hydrogel or soluble fibril form have been used for biomedical applications such as drug delivery, cell culture, vaccines, and tissue regeneration. To facilitate the translation of these materials, key areas of research still need to be addressed. Their structural characterization lags compared to amyloid proteins. Many of the structural features designed to guide materials formation are primarily being characterized by their observation in atomic resolution structures of amyloid assemblies. Herein, these motifs are examined in relation to peptide designs identifying common interactions that drive assembly and provide structural specificity. Current efforts to design complex structures, as reviewed here, highlight the need to extend the structural revolution of amyloid proteins to peptide assemblies to validate design principles. With respect to clinical applications, the fundamental interactions and responses of proteins, cells, and the immune system to peptide materials are still not well understood. Only a few trends are just now emerging for peptide materials interactions with biological systems. Understanding how peptide material properties influence these interactions will enable the translation of materials towards current and emerging applications.

The Use of Tissue Engineering to Fabricate Perfusable 3D Brain Microvessels in vitro

Tissue engineering of the blood-brain barrier (BBB) in vitro has been rapidly expanding to address the challenges of mimicking the native structure and function of the BBB. Most of these models utilize 2D conventional microfluidic techniques. However, 3D microvascular models offer the potential to more closely recapitulate the cytoarchitecture and multicellular arrangement of in vivo microvasculature, and also can recreate branching and network topologies of the vascular bed. In this perspective, we discuss current 3D brain microvessel modeling techniques including templating, printing, and self-assembling capillary networks. Furthermore, we address the use of biological matrices and fluid dynamics. Finally, key challenges are identified along with future directions that will improve development of next generation of brain microvasculature models.

Self-Assembling Hydrogel Structures for Neural Tissue Repair

Hydrogel materials have been employed as biological scaffolds for tissue regeneration across a wide range of applications. Their versatility and biomimetic properties make them an optimal choice for treating the complex and delicate milieu of neural tissue damage. Aside from finely tailored hydrogel properties, which aim to mimic healthy physiological tissue, a minimally invasive delivery method is essential to prevent off-target and surgery-related complications. The specific class of injectable hydrogels termed self-assembling peptides (SAPs), provide an ideal combination of in situ polymerization combined with versatility for biofunctionlization, tunable physicochemical properties, and high cytocompatibility. This review identifies design criteria for neural scaffolds based upon key cellular interactions with the neural extracellular matrix (ECM), with emphasis on aspects that are reproducible in a biomaterial environment. Examples of the most recent SAPs and modification methods are presented, with a focus on biological, mechanical, and topographical cues. Furthermore, SAP electrical properties and methods to provide appropriate electrical and electrochemical cues are widely discussed, in light of the endogenous electrical activity of neural tissue as well as the clinical effectiveness of stimulation treatments. Recent applications of SAP materials in neural repair and electrical stimulation therapies are highlighted, identifying research gaps in the field of hydrogels for neural regeneration.

Research advances of biomaterials-based microenvironment-regulation therapies for repair and regeneration of spinal cord injury

Traumatic spinal cord injury (SCI) usually results in restricted behaviour recovery and even life-changing paralysis, accompanied with numerous complications. Pathologically, the initial injuries trigger a series of secondary injuries, leading to an expansion of lesion site, a mass of neuron loss, and eventual failure of endogenous axon regeneration. As the advances rapidly spring up in regenerative medicine and tissue engineering biomaterials, regulation of these secondary injuries becomes possible, shedding a light on normal functional restoration. The successful tissue regeneration lies in proper regulation of the inflammatory microenvironment, including the inflammatory immune cells and inflammatory factors that lead to oxidative stress, inhibitory glial scar and neuroexcitatory toxicity. Specifically, the approaches based on microenvironment-regulating biomaterials have shown great promise in the repair and regeneration of SCI. In this review, the pathological inflammatory microenvironments of SCI are discussed, followed by the introduction of microenvironment-regulating biomaterials in terms of their impressive therapeutic effect in attenuation of secondary inflammation and promotion of axon regrowth. With the emphasis on regulating secondary events, the biomaterials for SCI treatment will become promising for clinical applications.

A multi-modal delivery strategy for spinal cord regeneration using a composite hydrogel presenting biophysical and biochemical cues synergistically

Extensive tissue engineering studies have supported the enhanced spinal cord regeneration by implantable scaffolds loaded with bioactive cues. However, scaffolds with single-cue delivery showed unsatisfactory effects, most likely due to the complex nature of hostile niches in the lesion area. In this regard, strategies of multi-modal delivery of multiple heterogeneous cell-regulatory cues are unmet needs for enhancing spinal cord repair, which requires a thorough understanding of the regenerative niche associated with spinal cord injury. Here, by combining hierarchically aligned fibrin hydrogel (AFG) and functionalized self-assembling peptides (fSAP), a novel multifunctional nanofiber composite hydrogel AFG/fSAP characterized with interpenetrating network is designed. Serving as a source of both biophysical and biochemical cues, AFG/fSAP can facilitate spinal cord regeneration via guiding regenerated tissues, accelerating axonal regrowth and remyelination, and promoting angiogenesis. Giving the synergistic effect of multiple cues, AFG/fSAP implantation contributes to anatomical, electrophysiological, and motor functional restorations in rats with spinal cord hemisection. This study provides a novel multi-modal approach for regeneration in central nervous system, which has potentials for clinical practice of spinal cord injury.

An overview of latest advances in exploring bioactive peptide hydrogels for neural tissue engineering

Neural tissue engineering holds great potential in addressing current challenges faced by medical therapies employed for the functional recovery of the brain. In this context, self-assembling peptides have gained considerable interest owing to their diverse physicochemical properties, which enable them to closely mimic the biophysical characteristics of the native ECM. Additionally, in contrast to synthetic polymers, which lack inherent biological signaling, peptide-based nanomaterials could be easily designed to present essential biological cues to the cells to promote cellular adhesion. Moreover, injectability of these biomaterials further widens their scope in biomedicine. In this context, hydrogels obtained from short bioactive peptide sequences are of particular interest owing to their facile synthesis and highly tunable properties. In spite of their well-known advantages, the exploration of short peptides for neural tissue engineering is still in its infancy and thus detailed discussion is required to evoke interest in this direction. This review provides a general overview of various bioactive hydrogels derived from short peptide sequences explored for neural tissue engineering. The review also discusses the current challenges in translating the benefits of these hydrogels to clinical practices and presents future perspectives regarding the utilization of these hydrogels for advanced biomedical applications.

The design criteria and therapeutic strategy of functional scaffolds for spinal cord injury repair

Spinal cord injury (SCI) remains a therapeutic challenge in clinic. Current drug and cell therapeutics have obtained significant efficacy but are still in the early stages for complete neural and functional recovery. In the past few decades, functional scaffolds (FSs) have been rapidly developed to bridge the lesion and provide a framework for tissue regeneration in SCI repair. Moreover, a FS can act as an adjuvant for locally delivering drugs in the lesion with a designed drug release profile, and supplying a biomimetic environment for implanted cells. In this review, the design criteria of FSs for SCI treatment are summarized according to their biocompatibility, mechanical properties, morphology, architecture, and biodegradability. Subsequently, FSs designed for SCI repair in the scope of drug delivery, cell implantation and combination therapy are introduced, respectively. And how a FS promotes their therapeutic efficacy is analyzed. Finally, the challenges, perspectives, and potential of FSs for SCI treatment are discussed. Hopefully, this review may inspire the future development of potent FSs to facilitate SCI repair in clinic.

Recent Progress in the Design and Medical Application of In Situ Self-Assembled Polypeptide Materials

Inspired by molecular self-assembly, which is ubiquitous in natural environments and biological systems, self-assembled peptides have become a research hotspot in the biomedical field due to their inherent biocompatibility and biodegradability, properties that are afforded by the amide linkages forming the peptide backbone. This review summarizes the biological advantages, principles, and design strategies of self-assembled polypeptide systems. We then focus on the latest advances in in situ self-assembly of polypeptides in medical applications, such as oncotherapy, materials science, regenerative medicine, and drug delivery, and then briefly discuss their potential challenges in clinical treatment.

Dynamic Tuning of Viscoelastic Hydrogels with Carbonyl Iron Microparticles Reveals the Rapid Response of Cells to Three-Dimensional Substrate Mechanics

Current methods to dynamically tune three-dimensional hydrogel mechanics require specific chemistries and substrates that make modest, slow, and often irreversible changes in their mechanical properties, exclude the use of protein-based scaffolds, or alter the hydrogel microstructure and pore size. Here, we rapidly and reversibly alter the mechanical properties of hydrogels consisting of extracellular matrix proteins and proteoglycans by adding carbonyl iron microparticles (MPs) and applying external magnetic fields. This approach drastically alters hydrogel mechanics: rheology reveals that application of a 4000 Oe magnetic field to a 5 mg/mL collagen hydrogel containing 10 wt % MPs increases the storage modulus from approximately 1.5 to 30 kPa. Cell morphology experiments show that cells embedded within these hydrogels rapidly sense the magnetically induced changes in ECM stiffness. Ca²⁺ transients are altered within seconds of stiffening or subsequent softening, and slower but still dynamic changes occur in YAP nuclear translocation in response to time-dependent application of a magnetic field. The near instantaneous change in hydrogel mechanics provides new insight into the effect of changing extracellular stiffness on both acute and chronic changes in diverse cell types embedded in protein-based scaffolds. Due to its flexibility, this method is broadly applicable to future studies interrogating cell mechanotransduction in three-dimensional substrates.

Polymer Scaffolds for Biomedical Applications in Peripheral Nerve Reconstruction

The nervous system is a significant part of the human body, and peripheral nerve injury caused by trauma can cause various functional disorders. When the broken end defect is large and cannot be repaired by direct suture, small gap sutures of nerve conduits can effectively replace nerve transplantation and avoid the side effect of donor area disorders. There are many choices for nerve conduits, and natural materials and synthetic polymers have their advantages. Among them, the nerve scaffold should meet the requirements of good degradability, biocompatibility, promoting axon growth, supporting axon expansion and regeneration, and higher cell adhesion. Polymer biological scaffolds can change some shortcomings of raw materials by using electrospinning filling technology and surface modification technology to make them more suitable for nerve regeneration. Therefore, polymer scaffolds have a substantial prospect in the field of biomedicine in future. This paper reviews the application of nerve conduits in the field of repairing peripheral nerve injury, and we discuss the latest progress of materials and fabrication techniques of these polymer scaffolds.

Rapid fabrication of gelatin-based scaffolds with prevascularized channels for organ regeneration

One of the biggest hinders in tissue engineering over the last decades was the complexity of the prevascularized channels of the engineered scaffold, which was still lower than that of human tissues. Another relative trouble was lacking precision molding capability, which restricted the clinical applications of the huge engineered scaffold. In this study, a promising approach was proposed to prepare hydrogel scaffold with prevascularized channels by liquid bath printing, which chitosan/β-sodium glycerophosphate (CS/β-GP) severed as the ink hydrogel, and gelation/nanoscale bacterial cellulose (Gel/BC) acted as the supporting hydrogel. Here, the ink hydrogel was printed by a versatile nozzle and embedded in the supporting hydrogel. Ink hydrogel transformed into liquid effluent at low temperature after cross-linking of gelatin by microbial transglutaminase (mTG). No residual template was seen on the channel surface after template removal. This preparation had a high degree of freedom in the geometry of the channel, which was demonstrated by making various prevascularized channels including circular, branched, and tree-shaped networks. The molding accuracy of the channel was detected by studying the roundness of the cross-section of the molded hollow channel, and the effect of the mechanical properties by adding BC to supporting hydrogel was analyzed. Human umbilical vein endothelial cells (HUVECs) were injected into the aforementioned channels and formed confluent and homogeneous distribution on the surface of channels. Altogether, these results showed that this approach can construct hydrogel scaffold with complex and accurate molding prevascularized channels, and had great potential to resolve urgent vascularization issue of bulk tissue-engineering scaffold.

Blood-Spinal Cord Barrier in Spinal Cord Injury: A Review

The blood-spinal cord barrier (BSCB), a physical barrier between the blood and spinal cord parenchyma, prevents the toxins, blood cells, and pathogens from entering the spinal cord and maintains a tightly controlled chemical balance in the spinal environment, which is necessary for proper neural function. A BSCB disruption, however, plays an important role in primary and secondary injury processes related to spinal cord injury (SCI). After SCI, the structure of the BSCB is broken down, which leads directly to leakage of blood components. At the same time, the permeability of the BSCB is also increased. Repairing the disruption of the BSCB could alleviate the SCI pathology. We review the morphology and pathology of the BSCB and progression of therapeutic methods targeting BSCB in SCI.

Injectable Scaffold-Systems for the Regeneration of Spinal Cord: Advances of the Past Decade

Nowadays, whenever is possible and as an alternative to open spine surgery, minimally invasive procedures are preferred to treat spinal cord injuries (SCI), with percutaneous injections or small incisions, that are faster, less traumatic, and require less recovery time. Injectable repair systems are based on materials that can be injected in the lesion site, can eventually be loaded with drugs or even cells, and act as scaffolds for the lesion repair. The review analyzes papers written from 2010 onward on injectable materials/systems used/proposed for the regenerative and combinatorial therapies of SCI and discusses the in vivo models that have been used to validate them.

Systemic Administration of Fibroblast Growth Factor 21 Improves the Recovery of Spinal Cord Injury (SCI) in Rats and Attenuates SCI-Induced Autophagy

Protecting the death of nerve cells is an essential tactic for spinal cord injury (SCI) repair. Recent studies show that nerve growth factors can reduce the death of nerve cells and promote the healing of nerve injury. To investigate the conducive effect of fibroblast growth factor 21 (FGF21) on SCI repair. FGF21 proteins were systemically delivered into rat model of SCI via tail vein injection. We found that administration of FGF21 significantly promoted the functional recovery of SCI as assessed by BBB scale and inclined plane test, and attenuated cell death in the injured area by histopathological examination with Nissl staining. This was accompanied with increased expression of NeuN, GAP43 and NF200, and deceased expression of GFAP. Interestingly, FGF21 was found to attenuate the elevated expression level of the autophagy marker LC3-II (microtubules associated protein 1 light chain 3-II) induced by SCI in a dose-dependent manner. These data show that FGF21 promotes the functional recovery of SCI via restraining injury-induced cell autophagy, suggesting that systemic administration of FGF21 could have a therapeutic potential for SCI repair.

Self-Assembling Peptide-Based Hydrogels in Angiogenesis

Ischemic diseases, especially in the heart and the brain, have become a serious threat to human health. Growth factor and cell therapy are emerging as promising therapeutic strategies; however, their retention and sustainable functions in the injured tissue are limited. Self-assembling peptide (SAP)-based hydrogels, mimicking the extracellular matrix, are therefore introduced to encapsulate and controllably release cells, cell-derived exosomes or growth factors, thus promoting angiogenesis and tissue recovery after ischemia. We will summarize the classification, composition and structure of SAPs, and the influencing factors for SAP gelation. Moreover, we will describe the functionalized SAPs, and the combinatorial therapy of cells, exosomes or growth factors with functionalized SAPs for angiogenic process as well as its advantage in immunogenicity and injectability. Finally, an outlook on future directions and challenges is provided.

[Study on vascular remodeling, inflammatory response, and their correlations in acute spinal cord injury in rats]

Objective

To study the local vascular remodeling, inflammatory response, and their correlations following acute spinal cord injury (SCI) with different grades, and to assess the histological changes in SCI rats.

Methods

One hundred and sixteen adult female Sprague Dawley rats were randomly divided into 4 groups ( n=29). The rats in sham group were received laminectomy only. A standard MASCIS spinal cord compactor was applied with drop height of 12.5, 25.0, or 50.0 mm to establish the mild, moderate, or severe SCI model, respectively. Quantitative rat endothelial cell antigen 1 (RECA1) and CD68 positive areas and the correlations were studied by double immunofluorescent (DIF) staining at 12 hours, 24 hours, 3 days, 7 days, and 28 days following SCI. Moreover, qualitative neurofilament-H (NF-H) and glial fibrillary acidic protein (GFAP) positive glial cells were studied by DIF staining at 28 days. ELISA was used to detect the levels of tumor necrosis factor α (TNF-α), interleukin 1β (IL-1β), and IL-6 in spinal cord homogenates at 12 hours, 24 hours, and 3 days, and the correlations between TNF-α, IL-1β, or IL-6 levels and microvascular density (RECA1) were accordingly studied. Moreover, the neural tissue integrity and neuron damage were assessed by HE staining at 12 hours, 24 hours, 3 days, 7 days, and 28 days, and Nissl's staining at 28 days following SCI, respectively.

Results

DIF staining revealed that the ratio of RECA1 positive area was the highest in moderate group, higher in mild and severe groups, and the lowest in sham group with significant differences between groups ( P<0.05). The ratio of CD68 positive area was the highest in severe group, higher in moderate and mild groups, and the lowest in sham group with significant differences between groups ( P<0.05), except the comparisons between mild and moderate groups at 24 hours and 28 days after SCI ( P>0.05). There was no significant correlation between the RECA1 and CD68 expressions in sham group at different time points ( P>0.05). At 12 and 24 hours after SCI, the RECA1 and CD68 expressions in mild and moderate groups showed significant positive correlations ( P<0.05), while no significant correlation was found in severe group ( P>0.05). No significant correlations between the RECA1 and CD68 expressions was shown in all SCI groups at 3 days and in severe group at 7 days ( P>0.05), while the negative correlations were shown in mild and moderate groups at 7 days, and in all SCI groups at 28 days ( P<0.05). In mild, moderate, and severe groups, the axons became disrupted, shorter and thicker rods-like, or even merged blocks with increased injury, while the astrocytes decreased in number, unorganized and condensed in appearance. ELISA studies showed that TNF-α, IL-1β, and IL-6 levels in sham group were significantly lower than those in other 3 groups at different time points ( P>0.05). The differences in TNF-α, IL-1β, and IL-6 levels between SCI groups at different time points were sinificant ( P<0.05), except IL-1β levels between the mild and moderate groups at 12 hours ( P>0.05). Three inflammatory factors were all significantly correlated with the microvascular density grades ( P<0.05). Histological analysis indicated that the damage to spinal cord tissue structure correlated with the extent of SCI. In severe group, local hemorrhage, edema, and infiltration of inflammatory cells were found the most drastic, the grey/white matter boundary was disappeared concurrently with the formation of cavity and shortage of normal neurons.

Conclusion

In the acute stage following mild or moderate SCI, progressively aggravated injury result in higher microvessel density and increased inflammation. However, at the SCI region, the relation between microvessel density and inflammation inverse with time in the different grades of SCI. Accordingly, the destruction of neural structures positively relate to the grades of SCI and severity of inflammation.

Synthetic peptide hydrogels as 3D scaffolds for tissue engineering

The regeneration of tissues and organs poses an immense challenge due to the extreme complexity in the research work involved. Despite the tissue engineering approach being considered as a promising strategy for more than two decades, a key issue impeding its progress is the lack of ideal scaffold materials. Nature-inspired synthetic peptide hydrogels are inherently biocompatible, and its high resemblance to extracellular matrix makes peptide hydrogels suitable 3D scaffold materials. This review covers the important aspects of peptide hydrogels as 3D scaffolds, including mechanical properties, biodegradability and bioactivity, and the current approaches in creating matrices with optimized features. Many of these scaffolds contain peptide sequences that are widely reported for tissue repair and regeneration and these peptide sequences will also be discussed. Furthermore, 3D biofabrication strategies of synthetic peptide hydrogels and the recent advances of peptide hydrogels in tissue engineering will also be described to reflect the current trend in the field. In the final section, we will present the future outlook in the design and development of peptide-based hydrogels for translational tissue engineering applications.

Prevascularized Scaffolds Bearing Human Dental Pulp Stem Cells for Treating Complete Spinal Cord Injury

The regeneration of injured spinal cord is hampered by the lack of vascular supply and neurotrophic support. Transplanting tissue-engineered constructs with developed vascular networks and neurotrophic factors, and further understanding the pattern of vessel growth in the remodeled spinal cord tissue are greatly desired. To this end, highly vascularized scaffolds embedded with human dental pulp stem cells (DPSCs) are fabricated, which possess paracrine-mediated angiogenic and neuroregenerative potentials. The potent pro-angiogenic effect of the prevascularized scaffolds is first demonstrated in a rat femoral bundle model, showing robust vessel growth and blood perfusion induced within these scaffolds postimplantation, as evidenced by laser speckle contrast imaging and 3D microCT dual imaging modalities. More importantly, in a rat complete spinal cord transection model, the implantation of these scaffolds to the injured spinal cords can also promote revascularization, as well as axon regeneration, myelin deposition, and sensory recovery. Furthermore, 3D microCT imaging and novel morphometric analysis on the remodeled spinal cord tissue demonstrate substantial regenerated vessels, more significantly in the sensory tract regions, which correlates with behavioral recovery following prevascularization treatment. Taken together, prevascularized DPSC-embedded constructs bear angiogenic and neurotrophic potentials, capable of augmenting and modulating SCI repair.

Biomaterials in Neurodegenerative Disorders: A Promising Therapeutic Approach

Neurodegenerative disorders (i.e., Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis, and spinal cord injury) represent a great problem worldwide and are becoming prevalent because of the increasing average age of the population. Despite many studies having focused on their etiopathology, the exact cause of these diseases is still unknown and until now, there are only symptomatic treatments. Biomaterials have become important not only for the study of disease pathogenesis, but also for their application in regenerative medicine. The great advantages provided by biomaterials are their ability to mimic the environment of the extracellular matrix and to allow the growth of different types of cells. Biomaterials can be used as supporting material for cell proliferation to be transplanted and as vectors to deliver many active molecules for the treatments of neurodegenerative disorders. In this review, we aim to report the potentiality of biomaterials (i.e., hydrogels, nanoparticles, self-assembling peptides, nanofibers and carbon-based nanomaterials) by analyzing their use in the regeneration of neural and glial cells their role in axon outgrowth. Although further studies are needed for their use in humans, the promising results obtained by several groups leads us to suppose that biomaterials represent a potential therapeutic approach for the treatments of neurodegenerative disorders.

Formulation of thrombin-inhibiting hydrogels via self-assembly of ionic peptides with peptide-modified polymers

Cell therapy for spinal cord injuries offers the possibility of replacing lost cells after trauma to the central nervous system (CNS). In preclinical studies, synthetic hydrogels are often co-delivered to the injury site to support survival and integration of the transplanted cells. These hydrogels ideally mimic the mechanical and biochemical features of a healthy CNS extracellular matrix while also providing the possibility of localized drug delivery to promote healing. In this work, we synthesize peptide-functionalized polymers that contain both a peptide sequence for incorporation into self-assembled peptide hydrogels along with bioactive peptides that inhibit scar formation. We demonstrate that peptide hydrogels formulated with the peptide-functionalized polymers possess similar mechanical properties (soft and shear-thinning) as peptide-only hydrogels. Small angle neutron scattering analysis reveals that polymer-containing hydrogels possess larger inhomogeneous domains but small-scale features such as mesh size remain the same as peptide-only hydrogels. We further confirm that the integrated hydrogels containing bioactive peptides exhibit thrombin inhibition activity, which has previously shown to reduce scar formation in vivo. Finally, while the survival of encapsulated cells was poor, cells cultured on the hydrogels exhibited good viability. Overall, the described composite hydrogels formed from self-assembling peptides and peptide-modified polymers are promising, user-friendly materials for CNS applications in regeneration.

The Influence of Neuron-Extrinsic Factors and Aging on Injury Progression and Axonal Repair in the Central Nervous System

In the aging western population, the average age of incidence for spinal cord injury (SCI) has increased, as has the length of survival of SCI patients. This places great importance on understanding SCI in middle-aged and aging patients. Axon regeneration after injury is an area of study that has received substantial attention and made important experimental progress, however, our understanding of how aging affects this process, and any therapeutic effort to modulate repair, is incomplete. The growth and regeneration of axons is mediated by both neuron intrinsic and extrinsic factors. In this review we explore some of the key extrinsic influences on axon regeneration in the literature, focusing on inflammation and astrogliosis, other cellular responses, components of the extracellular matrix, and myelin proteins. We will describe how each element supports the contention that axonal growth after injury in the central nervous system shows an age-dependent decline, and how this may affect outcomes after a SCI.