Humidity mediated performance and material properties of orb weaving spider adhesive droplets

The sticky truth: how spider predation success depends on their prey's body surface

Spiders are prominent predators for insects, with which they have a close co-evolutionary history. Manifold capture techniques have evolved, with spider webs being one of most well-known traps in the world. Many webs include specialised threads, bearing either glue or cribellate nanofibres as adhesive to capture prey. Some webs, such as the sheet webs of Tarantulae, have no such intricate threads. The adhesion of gluey threads has been extensively studied already, but often on artificial surfaces. However, recent studies discovered that adhesion of cribellate nanofibres increases massively after contact with insect cuticular hydrocarbons (CHCs). This raises the question whether insect CHCs generally influence prey capture. We compared the adhesion of cribellate, ecribellate gluey and ecribellate non-specialised threads to either uncoated or CHC-coated foil, or native prey body surfaces. We found an influence of CHCs on all silken threads, but with different outcomes. CHC presence, its composition as well as the surface structure can impact the final adhesion force positively or negatively, depending on the thread type. In extreme cases, the adhesion was reduced to nearly zero (e.g. for gluey capture threads in contact with real prey). Thus, prey influence on adhesion is not limited to cribellate capture threads, but is a universal influence on adhesion of spider silken capture threads. Future studies should consider both insect surface chemistry and surface structure when assessing the effectiveness of capture thread types in an ecological and evolutionary context.

Changes in the material properties of spider glue droplet proteins accompanied shifts in prey capture biomechanics as cobweb spiders diverged from their orb weaving ancestors

Although descended from orb weavers, spiders in the family Theridiidae spin cobwebs whose sticky prey capture gumfoot lines extend from a silk tangle to a surface below. When a crawling insect contacts glue droplets at the bottom of a gumfoot line, the line's weak pyriform anchor releases, causing the taut line to contract, pulling the insect from the surface and making its struggles to escape ineffective. To determine if this change in prey capture biomechanics was accompanied by a change in the material properties of theridiid glue, we characterized the elastic modulus and toughness of the glue droplet proteins of four theridiid species at 20-90 % relative humidity and compared their properties with those of 13 orb weaving species in the families Tetragnathidae and Araneidae. Compared to orb weavers, theridiid glue proteins had low extensions per protein volume and low elastic modulus and toughness values. These differences are likely explained by the loss of tension on a gumfoot line when its anchor fails, which may prioritize glue droplet adhesion rather than extension. Similarities in theridiid glue droplet properties did not reflect these species' evolutionary relationships. Instead, they appear associated with differences in web architecture. Two species that had stiffer gumfoot support lines and longer and more closely spaced gumfoot lines also had stiffer glue proteins. These lines may store more energy, and, when their anchors release, require stiffer glue to resist the more forceful upward thrust of a prey. STATEMENT OF SIGNIFICANCE: When a crawling insect contacts glue droplets on a theridiid cobweb's gumfoot line, this taut line's anchor fails and the insect is hoisted upward, rendering its struggles to escape ineffective. This strategy contrasts with that of orb weaving ancestors, which rely on more closely spaced prey capture threads to intercept and retain flying insects. A comparison of the elastic modulus and toughness of gumfoot and orb web glue proteins shows that this change in prey capture biomechanics is associated with reductions in the stiffness and toughness of cobweb glue. Unlike orb web capture threads, whose droplets extend in a coordinated fashion to sum adhesive forces, gumfoot lines become untethered, which prioritizes glue droplet adhesive contact over glue droplet extension.

Integrated transcriptome and metabolome analysis reveals molecular responses of spider to single and combined high temperature and drought stress

High temperature and drought are abiotic stresses restricting many arthropods' survival and growth. Wolf spiders are poikilothermic arthropods that are vital in managing insects and pests. Nonetheless, investigating changes in spiders under temperature and drought stress are limited, especially at the molecular and gene expression levels. The study found that the combined effects of high temperature and drought stress significantly reduced survival rates and raised superoxide dismutase and malondialdehyde levels in the wolf spider Pardosa pseudoannulata. An integrated transcriptome and metabolome analysis showed that differentially expressed genes and metabolites were highly enriched in pathways involved in the proteolysis and oxidation-reduction process. The gene expression profiles displayed that heat shock protein (HSP) families (i.e., small heat shock protein, HSP70, HSP90, and HSP beta protein) were up-regulated under temperature and/or drought stresses. Additionally, a conjoint analysis revealed that under the combined stress, several important enzymes, including maltase-glucoamylase, glycerol-6-phosphate transporter, alanine-glyoxylate transaminase, and prostaglandin-H2 D-isomerase, were altered, affecting the metabolism of starch, sucrose, amino acids, and arachidonic acid. The protein interaction network further confirmed that under the combined stress, metabolic processes, peptide metabolic processes, and ATP generation from ADP were up-regulated, indicating that spiders could accelerate the metabolism of carbohydrates and proteins to combat stress and maintain homeostasis. Overall, this work showed that exposure to a combination of pressures might cause distinct defensive reactions in spiders and offered novel perspectives to research the molecular underpinnings of spider adaptation to a changing climate.

Adhesive contact and protein elastic modulus tune orb weaving spider glue droplet biomechanics to habitat humidity

Tiny glue droplets along the viscous capture threads of spider orb webs prevent insects from escaping. Each droplet is formed of a protein core surrounded by a hygroscopic aqueous layer, which cause the droplet's adhesion to change with humidity. As an insect struggles to escape the web, a thread's viscoelastic core proteins extend, transferring adhesive forces to the thread's support fibers. Maximum adhesive force is achieved when absorbed atmospheric moisture allows a flattened droplet to establish sufficient adhesive contact while maintaining the core protein cohesion necessary for force transfer. We examined the relationship between these droplet properties and adhesive force and the work of extending droplets at five relative humidities in twelve species that occupy habitats which have different humidities. A regression analysis that included both flattened droplet area and core protein elastic modulus described droplet adhesion, but the model was degraded when core protein area was substituted for droplet. Species from low humidity habitats expressed greater adhesion at lower humidities, whereas species from high humidity habitats expressed greater adhesion at high humidities. Our results suggest a general model of droplet adhesion with two adhesion peaks, one for low humidity species, which occurs when increasing droplet area and decreasing protein cohesion intersect, and another for high humidity species, which occurs when area and cohesion have diverged maximally. These dual peaks in adhesive force explain why some species from intermediate and high humidity habitats express high adhesion at several humidities. STATEMENT OF SIGNIFICANCE: We characterized the effect of humidity on the adhesion of twelve orb weaving spider species' glue droplets and showed how humidity-mediated changes in the contact area of a droplet's outer, hygroscopic aqueous layer and the stiffness of its protein core affect droplet performance. This revealed how droplet adhesion has been tuned to the humidity of a species' habitat and allowed us to revise a model that describes the environmental determinants of droplet biomechanics.

Molecular Changes in Spider Viscid Glue As a Function of Relative Humidity Revealed Using Infrared Spectroscopy

Spider aggregate glue can absorb moisture from the atmosphere to reduce its viscosity and become tacky. The viscosity at which glue adhesion is maximized is remarkably similar across spider species, even though that viscosity is achieved at very different relative humidity (RH) values matching their diverse habitats. However, the molecular changes in the protein structure and the bonding state of water (both referred to here as molecular structure) with respect to the changes in RH are not known. We use attenuated total reflectance-infrared (ATR-IR) spectroscopy to probe the changes in the molecular structure of glue as a function of RH for three spider species from different habitats. We find that the glue retains bound water at lower RH and absorbs liquid-like water at higher RH. The absorption of liquid-like water at high RH plasticizes the glue and explains the decrease in glue viscosity. The changes to protein conformations as a function RH are either subtle or not detectable by IR spectroscopy. Importantly, the molecular changes are reversible over multiple cycles of RH change. Further, separation of glue constituents results in a different humidity response as compared to pristine glue, supporting the standing hypothesis that the glue constituents have a synergistic association that makes spider glue a functional adhesive. The results presented in this study provide further insights into the mechanism of the humidity-responsive adhesion of spider glue.

Correlated evolution between orb weaver glue droplets and supporting fibres maintains their distinct biomechanical roles in adhesion

Orb weaving spiders employ a 'silken toolkit' to accomplish a range of tasks, including retaining prey that strike their webs. This is accomplished by a viscous capture spiral thread that features tiny glue droplets, supported by a pair of elastic flagelliform fibres. Each droplet contains a glycoprotein core responsible for adhesion. However, prey retention relies on the integrated performance of multiple glue droplets and their supporting fibres, with previous studies demonstrating that a suspension bridge forms, whose biomechanics sum the adhesive forces of multiple droplets while dissipating the energy of the struggling insect. While the interdependence of the droplet's glycoprotein and flagelliform fibres for functional adhesion is acknowledged, there has been no direct test of this hypothesized linkage between the material properties of each component. Spider mass, which differs greatly across orb weaving species, also has the potential to affect flagelliform fibre and glycoprotein material properties. Previous studies have linked spider mass to capture thread performance but have not examined the relationship between spider mass and thread material properties. We extend earlier studies to examine these relationships in 16 orb weaving species using phylogenetic generalized least squares. This analysis revealed that glycoprotein stiffness (elastic modulus) was correlated with flagelliform fibre stiffness, and that spider mass was related to the glycoprotein volume, flagelliform fibre cross-sectional area and droplets per unit thread length. By shaping the elastic moduli of glycoprotein adhesive and flagelliform fibres, natural selection has maintained the biomechanical integration of this adhesive system.