Double-layered osmotic pump controlled release tablets of actarit: In vitro and in vivo evaluation

Fabrication and optimization of extended-release beads of diclofenac sodium based on Ca++ cross-linked Taro (Colocasia esculenta) stolon polysaccharide and pectin by quality-by-design approach

The present investigation was aimed to fabricate and optimize extended-release beads of diclofenac sodium based on an ion-cross-linked matrix of pectin (PTN) and taro (Colocasia esculenta) stolon polysaccharide (TSP) with 23 full factorial design. Total polysaccharide concentration (TPC), polysaccharide ratio (PR), and cross-linker concentration ([CaCl2]) were taken as independent factors with two levels of each. Initially, TSP was extracted, purified, and characterized. Fourier-transform infrared spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC) showed drug-polymer compatibility. The study also revealed the significant positive effect of TSP on drug entrapment efficiency (DEE) and sustaining drug release. The response variables (DEE, cumulative % drug-release at 1, 2, 4, 6, and 10 h, release-constant, time for 50 % and 90 % drug release (T50%, T90%), release-similarity factor (f2), and difference factor (f1) were analyzed, and subsequently, independent fabrication variables were numerically optimized by Design-Expert software (Version-13; Stat-Ease Inc., Minneapolis). The optimized batch exhibited appreciable DEE of 88.5 % (± 2.2) and an extended-release profile with significantly higher T50%, T90%, and release-similarity factor (f2) of 4.7 h, 11.4 h, and 71.6, respectively. Therefore, the study exhibited successful incorporation of the novel TSP as a potential alternative adjunct polysaccharide in the pectin-based ion-cross-linked inter-penetrating polymeric network for extended drug release.

Ionic Liquid Transdermal Patches of Two Active Ingredients Based on Semi-Ionic Hydrogen Bonding for Rheumatoid Arthritis Treatment

Rheumatoid arthritis (RA) is a chronic autoimmune disease that leads to deformities and disabilities in patients. Conventional treatment focuses on delaying progression; therefore, new treatments are necessary. The present study reported a novel ionic liquid transdermal platform for efficient RA treatment, and the underlying mechanism was elucidated using FTIR, 1H-NMR, Raman, XPS, and molecular simulations. The results showed that the reversibility of the semi-ionic hydrogen bonding facilitated high drug loading and enhanced drug permeability. Actarit's drug loading had an approximately 11.34-times increase. The in vitro permeability of actarit and ketoprofen was improved by 5.46 and 2.39 times, respectively. And they had the same significant effect in vivo. Furthermore, through the integration of network pharmacology, Western blotting (WB), and radiology analyses, the significant osteoprotective effects of SIHDD-PSA (semi-ionic H-bond double-drug pressure-sensitive adhesive transdermal patch) were revealed through the modulation of the JAK-STAT pathway. The SIHDD-PSA significantly reduced paw swelling and inflammation in the rat model, and stimulatory properties evaluation confirmed the safety of SIHDD-PSA. In conclusion, these findings provide a novel approach for the effective treatment of RA, and the semi-ionic hydrogen bonding strategy contributes a new theoretical basis for developing TDDS.

Preparation of tofacitinib sustained-release tablets using hot melt extrusion technology

This study aimed to develop a tablet that shows a drug release profile similar to the tofacitinib sustained-release tablet (Xeljanz XR®; OROS™) using hot melt extrusion technology. Tofacitinib citrate was selected as the drug. HPMCAS, HPMCP, and Kollidon VA64 were used as thermoplastic polymers to prepare a hot-melt extrudate. The extrudate was obtained from a twin screw extruder and pelletizer. The granules were compressed using a single punch press machine and then coated. TGA, DSC, XRD, FT-IR, and SEM were performed on the hot melt extrudate to understand its physicochemical properties. Dissolution tests were performed using the paddle method (USP Apparatus II). The results showed that the crystallinity state of tofacitinib changed to amorphous after the hot melt extrusion process; however, no chemical change was observed. The drug release profile was similar to that of Xeljanz XR®, which has an initial lag time owing to its OROS™ formulation; a coating process was performed to obtain a similar drug release profile. The lag time was controlled by adjusting the thickness of the coating layer. Moreover, the extrudate size and compression force during tableting did not significantly affect drug release. In conclusion, the new tofacitinib sustained-release tablet prepared using hot melt extrusion showed a drug release behavior similar to that of Xeljanz XR®.

Landscape of molecular crosstalk between SARS-CoV-2 infection and cardiovascular diseases: emphasis on mitochondrial dysfunction and immune-inflammation

BACKGROUND

SARS-CoV-2, the pathogen of COVID-19, is a worldwide threat to human health and causes a long-term burden on the cardiovascular system. Individuals with pre-existing cardiovascular diseases are at higher risk for SARS-CoV-2 infection and tend to have a worse prognosis. However, the relevance and pathogenic mechanisms between COVID-19 and cardiovascular diseases are not yet completely comprehended.

METHODS

Common differentially expressed genes (DEGs) were obtained in datasets of human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) infected with SARS-CoV-2 and myocardial tissues from heart failure patients. Further GO and KEGG pathway analysis, protein-protein interaction (PPI) network construction, hub genes identification, immune microenvironment analysis, and drug candidate predication were performed. Then, an isoproterenol-stimulated myocardial hypertrophy cell model and a transverse aortic constriction-induced mouse heart failure model were employed to validate the expression of hub genes.

RESULTS

A total of 315 up-regulated and 78 down-regulated common DEGs were identified. Functional enrichment analysis revealed mitochondrial metabolic disorders and extensive immune inflammation as the most prominent shared features of COVID-19 and cardiovascular diseases. Then, hub DEGs, as well as hub immune-related and mitochondria-related DEGs, were screened. Additionally, nine potential therapeutic agents for COVID-19-related cardiovascular diseases were proposed. Furthermore, the expression patterns of most of the hub genes related to cardiovascular diseases in the validation dataset along with cellular and mouse myocardial damage models, were consistent with the findings of bioinformatics analysis.

CONCLUSIONS

The study unveiled the molecular networks and signaling pathways connecting COVID-19 and cardiovascular diseases, which may provide novel targets for intervention of COVID-19-related cardiovascular diseases.

Development and pharmacokinetic evaluation of osmotically controlled drug delivery system of Valganciclovir HCl for potential application in the treatment of CMV retinitis

Valganciclovir HCl (VGH) is the widely used drug for the treatment of cytomegalovirus (CMV) retinitis infection with an induction dose of 900 mg per oral (p.o.) twice a day and a maintenance dose of 900 mg (p.o.). This required dose of the drug also leads to multiple side effects due to repeated administration. The research was highlighted to develop, formulate, optimize, and evaluate single-core osmotic pump (SCOP) tablet of VGH with the dose of 450 mg to reduce dosing frequency and associated side effects. The decrease in dose also minimizes the hepatic and nephrotic load. The optimized batch of the formulation was subjected to comparative in vitro and in vivo evaluation. The tablet core composition is the primary influencer of the drug delivery fraction in a zero order, whereas the membrane characteristics control the drug release rate. In vivo pharmacokinetic studies revealed that the newly developed osmotic formulation has controlled zero-order release for 24 h with a single dose of 450 mg while the marketed formulation requires twice administration within 24 h to maintain the plasma concentration in the therapeutic window. The pharmacokinetic study demonstrated that the developed formulation has the area under curve (AUC) of 58.415 µg h/ml with single dose while the marketed formulation shows the AUC of about 37.903 µg h/ml and 31.983 µg h/ml for first and second dose, respectively. The large AUC demonstrates the extended release of drug with a single dose and effective plasma concentration. Hence, the developed formulation can be a promising option for the treatment of CMV retinitis with the minimum dose and dosing frequency.

SeDeM tool-driven full factorial design for osmotic drug delivery of tramadol HCl: Formulation development, physicochemical evaluation, and in-silico PBPK modeling for predictive pharmacokinetic evaluation using GastroPlus™

The study is based on using SeDeM expert system in developing controlled-release tramadol HCl osmotic tablets and its in-silico physiologically based pharmacokinetic (PBPK) modeling for in-vivo pharmacokinetic evaluation. A Quality by Design (QbD) based approach in developing SeDEM-driven full factorial osmotic drug delivery was applied. A 2⁴ Full-factorial design was used to make the trial formulations of tramadol HCl osmotic tablets using NaCl as osmogen, Methocel K4M as rate controlling polymer, and avicel pH 101 as diluent. The preformulation characteristics of formulations (F1-F16) were determined by applying SeDeM Expert Tool. The formulation was optimized followed by in-vivo predictive pharmacokinetic assessment using PBPK “ACAT” model of GastroPlus™. The FTIR results showed no interaction among the ingredients. The index of good compressibility (ICG) values of all trial formulation blends were ≥5, suggesting direct compression is the best-suited method. Formulation F3 and F4 were optimized based on drug release at 2, 10, and 16 h with a zero-order kinetic release (r² = 0.992 and 0.994). The SEM images confirmed micropores formation on the surface of the osmotic tablet after complete drug release. F3 and F4 were also stable (shelf life 29.41 and 23.46 months). The in vivo simulation of the pharmacokinetics of the PBPK in-silico model revealed excellent relative bioavailability of F3 and F4 with reference to tramadol HCl 50 mg IR formulations. The SeDeM expert tool was best utilized to evaluate the compression characteristics of selected formulation excipients and their blends for direct compression method in designing once-daily osmotically controlled-release tramadol HCl tablets. The in-silico GastroPlus™ PBPK modeling provided a thorough pharmacokinetic assessment of the optimized formulation as an alternative to tramadol HCl in vivo studies.

Osmotic-controlled release oral tablets: technology and functional insights

In recent years, oral osmotic tablets have sparked a therapeutic paradigm for controlled-release dosage forms due to their intrinsic insensitivity to physiological and physicochemical factors. Despite these benefits, the design of an optimal osmotic technology is precluded by various challenges. These limitations include manufacturing complexity, the lack of understanding of the functional mechanics, and inadequate optimization for the desired bio-performance. This paper systematically reviews the development of an osmotic-driven drug delivery system and the strategy for a zero-order release profile with an emphasis on swellable core technology. We discuss the applicability of the various types of osmotic tablets, their suitability to specific needs, and factors that drive the technology selection. Finally, we review the challenges, opportunities, and future perspectives associated with osmotic tablets.

Development, optimization and pharmacokinetic evaluation of biphasic extended-release osmotic drug delivery system of trospium chloride for promising application in treatment of overactive bladder

Background

The research was aimed with an approach to formulate biphasic extended-release system of trospium chloride resulting in controlled release of drug up to 24 h with prospects of better control on urinary frequency, efficacy, tolerability, and improved patient compliance. The push–pull osmotic pump (PPOP) bi-layered tablet of trospium chloride (60 mg) was developed with the use of immediate-release polymers in the pull layer (30 mg drug) and polyethylene oxide in the push layer (remaining 30 mg drug). The tablet was formulated by compression after non-aqueous granulation, seal coating, and semipermeable coating. The tablet prepared was laser drilled to create an orifice for drug release.

Results

Comparative in vitro dissolution and in vivo pharmacokinetic analysis of available marketed formulations demonstrated the complete drug release within 16–18 h; hence the developed biphasic extended-release system has its great importance as it provides zero-order release up to 24 h.

Conclusions

The developed biphasic extended-release drug delivery system of trospium chloride provides the drug release for 24 h with effective plasma concentration in comparison with the available marketed formulation. Extended release of drug from the developed formulation provides scope for its promising application in the treatment of overactive bladder (OAB).

Identification and Validation of Carbonic Anhydrase II as the First Target of the Anti-Inflammatory Drug Actarit

Background and purpose: Identifying the macromolecular targets of drug molecules is a fundamental aspect of drug discovery and pharmacology. Several drugs remain without known targets (orphan) despite large-scale in silico and in vitro target prediction efforts. Ligand-centric chemical-similarity-based methods for in silico target prediction have been found to be particularly powerful, but the question remains of whether they are able to discover targets for target-orphan drugs. Experimental Approach: We used one of these in silico methods to carry out a target prediction analysis for two orphan drugs: actarit and malotilate. The top target predicted for each drug was carbonic anhydrase II (CAII). Each drug was therefore quantitatively evaluated for CAII inhibition to validate these two prospective predictions. Key Results: Actarit showed in vitro concentration-dependent inhibition of CAII activity with submicromolar potency (IC₅₀ = 422 nM) whilst no consistent inhibition was observed for malotilate. Among the other 25 targets predicted for actarit, RORγ (RAR-related orphan receptor-gamma) is promising in that it is strongly related to actarit’s indication, rheumatoid arthritis (RA). Conclusion and Implications: This study is a proof-of-concept of the utility of MolTarPred for the fast and cost-effective identification of targets of orphan drugs. Furthermore, the mechanism of action of actarit as an anti-RA agent can now be re-examined from a CAII-inhibitor perspective, given existing relationships between this target and RA. Moreover, the confirmed CAII-actarit association supports investigating the repositioning of actarit on other CAII-linked indications (e.g., hypertension, epilepsy, migraine, anemia and bone, eye and cardiac disorders).

Paracetamol extended release FDM 3D printlets: Evaluation of formulation variables on printability and drug release

Paracetamol printlets were prepared via hot-melt extrusion process and fused deposition modelling, using two types of backbone polymers. Polycaprolactone (PCL) and Polyethylene oxides (PEO) 100 K and 200 K were used, while Arabic gum was used as a plasticizer to facilitate the material flow and Gelucire® 44/14 as an enhancer of drug release. Different drug/polymer ratios were prepared. Extrusion temperature was adjusted according to the mixture/polymer types. It was possible to produce filaments with maximum of 60% w/w of drug. Mechanical properties of filaments were evaluated using three-point bend test, while obtained parameters were modelled using decision tree as a data mining method. Correlation between maximum displacement, maximum force and printability was obtained with accuracy of 84.85% and can be a useful tool for predicting printability of filaments. This study briefly demonstrated that backbone polymer in formulation plays crucial role in obtaining FDM printlets with desired properties. PEO-based filaments were more prone to be clogged in printcore, but their printlets showed much faster drug release. Drug release from all printlets was prolonged: from 50% in 8 h (PCL), to complete release in 4 h (PEO). Paracetamol release kinetics was guided by anomalous transport, attributed to the diffusion and erosion process.

Visualized analysis and evaluation of simultaneous controlled release of metformin hydrochloride and gliclazide from sandwiched osmotic pump capsule

The aim of this study was to develop the Metformin Hydrochloride and Gliclazide (MH-GZ) sandwiched osmotic pump capsule which could overcome the problems associated with short half-life and burst release. The system could deliver drugs with different solubility simultaneously at zero-order rate, in which MH-GZ were filled in both sides of the push layer respectively. The single factor and orthogonal test were employed to obtain the optimized formulation with the evaluation index of similarity factor (ƒ₂). R language was used to visualized analyze the main influence factors of drug release and their correlations. Pharmacokinetic study was performed in beagle dogs compared to the marketed conventional product, which showed decreased C_max, prolonged T_max, and improved bioavailability, independent of pH and agitational speed but related to osmotic pressure differences across the semi permeable membrane. The designed sandwiched osmotic pump capsule proposed a promising substitute for the marketed product for the treatment of type 2 diabetes.