Nanonization and Deformable Behavior of Fattigated Peptide Drug in Mucoadhesive Buccal Films

This study was tasked with the design of mucoadhesive buccal films (MBFs) containing a peptide drug, leuprolide (LEU), or its diverse nanoparticles (NPs), for enhanced membrane permeability via self-assembled nanonization and deformable behavior. An LEU-oleic acid conjugate (LOC) and its self-assembled NPs (LON) were developed. Additionally, a deformable variant of LON (d-LON) was originally developed by incorporating l-α-phosphatidylcholine into LON as an edge activator. The physicochemical properties of LON and d-LON, encompassing particle size, zeta potential, and deformability index (DI), were evaluated. MBFs containing LEU, LOC, and NPs (LON, d-LON) were prepared using the solvent casting method by varying the ratio of Eudragit RLPO and hydroxypropyl methylcellulose, with propylene glycol used as a plasticizer. The optimization of MBF formulations was based on their physicochemical properties, including in vitro residence time, dissolution, and permeability. The dissolution results demonstrated that the conjugation of oleic acid to LEU exhibited a more sustained LEU release pattern by cleaving the ester bond of the conjugate, as compared to the native LEU, with reduced variability. Moreover, the LOC and its self-assembled NPs (LON, d-LON), equivalent to 1 mg LEU doses in MBF, exhibited an amorphous state and demonstrated better permeability through the nanonization process than LEU alone, regardless of membrane types. The incorporation of lauroyl-L-carnitine into the films as a permeation enhancer synergistically augmented drug permeability. Most importantly, the d-LON-loaded buccal films showed the highest permeability, due to the deformability of NPs. Overall, MBF-containing peptide NPs and permeation enhancers have the potential to replace parenteral LEU administration by improving LEU druggability and patient compliance.

Preparation of tofacitinib sustained-release tablets using hot melt extrusion technology

This study aimed to develop a tablet that shows a drug release profile similar to the tofacitinib sustained-release tablet (Xeljanz XR®; OROS™) using hot melt extrusion technology. Tofacitinib citrate was selected as the drug. HPMCAS, HPMCP, and Kollidon VA64 were used as thermoplastic polymers to prepare a hot-melt extrudate. The extrudate was obtained from a twin screw extruder and pelletizer. The granules were compressed using a single punch press machine and then coated. TGA, DSC, XRD, FT-IR, and SEM were performed on the hot melt extrudate to understand its physicochemical properties. Dissolution tests were performed using the paddle method (USP Apparatus II). The results showed that the crystallinity state of tofacitinib changed to amorphous after the hot melt extrusion process; however, no chemical change was observed. The drug release profile was similar to that of Xeljanz XR®, which has an initial lag time owing to its OROS™ formulation; a coating process was performed to obtain a similar drug release profile. The lag time was controlled by adjusting the thickness of the coating layer. Moreover, the extrudate size and compression force during tableting did not significantly affect drug release. In conclusion, the new tofacitinib sustained-release tablet prepared using hot melt extrusion showed a drug release behavior similar to that of Xeljanz XR®.

Polyelectrolyte-based solid dispersions for enhanced dissolution and pH-Independent controlled release of sildenafil citrate

The aim of this study was to design a novel matrix tablet with enhanced dissolution and pH-independent controlled release of sildenafil citrate (SIL), a drug with pH-dependent solubility, by using solid dispersions (SDs) and polyelectrostatic interactions. SIL-loaded SDs were prepared using various polymeric carriers such as poloxamer 188, poloxamer 407, Soluplus®, polyvinylpyrrolidone (PVP) K 12, and PVP K 17 by the solvent evaporation method. Among these polymers, Soluplus® was found to be the most effective in SDs for enhancing the drug dissolution over 6 h in pH 6.8 intestinal fluid. SIL was well dispersed in Soluplus®-based SDs in an amorphous form. When the Soluplus®-based SDs were added in the tablet containing positively charged chitosan and negatively charged Eudragit® L100, the drug release rate was further modulated in a controlled manner. The charge density of the tablet was higher at pH 6.8 than at pH 1.2 due to the polyelectrostatic interaction between chitosan and Eudragit® L100. This interaction could provide a pH-independent controlled release of SIL. Our study demonstrates that a combinatory approach of Soluplus®-based SDs and polyelectrostatic interactions can improve the dissolution and pH-independent release performance of SIL. This approach could be a promising pharmaceutical strategy to design a matrix tablet of poorly water-soluble drugs for the enhanced bioavailability.

Impact of the New ESTRO-ACROP Target Volume Delineation Guideline on Breast-Related Complications after Implant-Based Reconstruction and Postmastectomy Radiotherapy

PURPOSE/OBJECTIVE(S)

The European Society for Radiotherapy and Oncology Advisory Committee in Radiation Oncology Practice (ESTRO-ACROP) recently updated a new target volume delineation guideline for postmastectomy radiotherapy (PMRT) after implant-based reconstruction. This study aimed whether this change has impact on breast-related complications.

MATERIALS/METHODS

We retrospectively reviewed patients who underwent PMRT after mastectomy with tissue expander or permanent implant insertion from 2016 to 2021. In total, 412 patients were included; 277 received RT by the new ESTRO-ACROP target delineation (ESTRO-T), and 135 received RT by conventional target delineation (CONV-T). The primary endpoint was comparison between the target groups of major breast-related complication, including infection, capsular contracture, deformity and necrosis requiring re-operation or re-hospitalization during follow-up after RT or delayed implant replacement. Complications were evaluated according to the Common Terminology Criteria for Adverse Events (CTCAE) version 5.0., and capsular contracture was graded by the Baker Classification.

RESULTS

The median follow-up was 29.5 months (range, 0.3-76.8). The 1-, 2-, and 3-year incidence rates of major breast-related complication were 5.7%, 10.0%, and 11.6% in the ESTRO-T group, and 8.2%, 13.8%, and 14.7% in the CONV-T groups; it did not show a difference between the groups (P = 0.55). In multivariate analyses, target delineation is not significantly associated with the major complications (hazard ratio [HR] = 0.93; P = 0.83, Table 1). There was no significant difference between the ESTRO-T and CONV-T groups in the incidence of any breast-related complications (3-year cumulative incidence, 37.3% vs. 29.4%, respectively; P = 0.28). Symptomatic RT-induced pneumonitis rates were 2.7% in the ESTRO-T group (7 patients) and 2.2% in the CONV-T group (3 patients). Only one local recurrence event occurred in the ESTRO-T group, which was within the ESTRO-target volume.

CONCLUSION

Target volume delineation according to the new ESTRO-ACROP guideline did not reduce the risk of major or any breast-related complications. As the dosimetric benefits of heart and lung have been reported, further analyses with long-term follow-up are necessary to evaluate whether it could be connected to better clinical outcomes.

Cellular Efficacy of Fattigated Nanoparticles and Real-Time ROS Occurrence Using Microfluidic Hepatocarcinoma Chip System: Effect of Anticancer Drug Solubility and Shear Stress

The objective of this study was to evaluate the effectiveness of organ-on-chip system investigating simultaneous cellular efficacy and real-time reactive oxygen species (ROS) occurrence of anticancer drug-loaded nanoparticles (NPs) using hepatocarcinoma cells (HepG2) chip system under static and hepatomimicking shear stress conditions (5 dyne/cm2). Then, the role of hepatomimetic shear stress exposed to HepG2 and drug solubility were compared. The highly soluble doxorubicin (DOX) and poorly soluble paclitaxel (PTX) were chosen. Fattigated NPs (AONs) were formed via self-assembly of amphiphilic albumin (HSA)-oleic acid conjugate (AOC). Then, drug-loaded AONs (DOX-AON or PTX-AON) were exposed to a serum-free HepG2 medium at 37 °C and 5% carbon dioxide for 24 h using a real-time ROS sensor chip-based microfluidic system. The cellular efficacy and simultaneous ROS occurrence of free drugs and drug-loaded AONs were compared. The cellular efficacy of drug-loaded AONs varied in a dose-dependent manner and were consistently correlated with real-time of ROS occurrence. Drug-loaded AONs increased the intracellular fluorescence intensity and decreased the cellular efficacy compared to free drugs under dynamic conditions. The half-maximal inhibitory concentration (IC50) values of free DOX (13.4 μg/mL) and PTX (54.44 μg/mL) under static conditions decreased to 11.79 and 38.43 μg/mL, respectively, under dynamic conditions. Furthermore, DOX- and PTX-AONs showed highly decreased IC50 values of 5.613 and 21.86 μg/mL, respectively, as compared to free drugs under dynamic conditions. It was evident that cellular efficacy and real-time ROS occurrence were well-correlated and highly dependent on the drug-loaded nanostructure, drug solubility and physiological shear stress.

Systemic proinflammatory-profibrotic response in aortic stenosis patients with diabetes and its relationship with myocardial remodeling and clinical outcome

Background

It is unclear whether and how diabetes mellitus may aggravate myocardial fibrosis and remodeling in the pressure-overloaded heart. We investigated the impact of diabetes on the prognosis of aortic stenosis (AS) patients and its underlying mechanisms using comprehensive noninvasive imaging studies and plasma proteomics.

Methods

Severe AS patients undergoing both echocardiography and cardiovascular magnetic resonance (CMR) (n=253 of which 66 had diabetes) comprised the imaging cohort. The degree of replacement and diffuse interstitial fibrosis by late gadolinium enhancement (LGE) and extracellular volume fraction (ECV) was quantified using CMR. Plasma samples were analyzed with the multiplex proximity extension assay for 92 proteomic biomarkers in a separate biomarker cohort of severe AS patients (n=100 of which 27 had diabetes).

Results

In the imaging cohort, diabetic patients were older (70.4±6.8 vs. 66.7±10.1 years) and had a higher prevalence of ischemic heart disease (28.8% vs. 9.1%), with more advanced ventricular diastolic dysfunction. On CMR, diabetic patients had increased replacement and diffuse interstitial fibrosis (LGE% 0.3 [0.0–1.6] versus 0.0 [0.0–0.5], p=0.009; ECV% 27.9 [25.7–30.1] versus 26.7 [24.9–28.5], p=0.025) (Figure 1).

Plasma proteomics analysis of the biomarker cohort revealed that 9 proteins (E-selectin, interleukin-1 receptor type 1, interleukin-1 receptor type 2, galectin-4, intercellular adhesion molecule 2, integrin beta-2, galectin-3, growth differentiation factor 15, and cathepsin D) are significantly elevated in diabetic AS patients (Figure 2). Pathway over-representation analyses of the plasma proteomics with Gene Ontology terms indicated that pathways related to inflammatory response and extracellular matrix components were enriched, suggesting that diabetes is associated with systemic effects that evoke proinflammatory and profibrotic response to the pressure-overloaded myocardium.

During follow-up (median 6.3 years [IQR 5.2–7.2]) of the imaging cohort, 232 patients received aortic valve replacement (AVR) with 53 unexpected heart failure admissions or death. Diabetes was a significant predictor of heart failure and death, independent of clinical covariates and AVR (hazard ratio 1.88, 95% confidence interval 1.06–3.31, p=0.030).

Conclusion

Plasma proteomic analyses indicate that diabetes potentiates the systemic proinflammatory and profibrotic milieu in AS patients. These systemic biological changes underlie the increase of myocardial fibrosis, diastolic dysfunction, and worse clinical outcomes in severe AS patients with concomitant diabetes.

Funding Acknowledgement

Type of funding sources: Foundation. Main funding source(s): National Research Foundation of Korea

Augmented risk of ischemic stroke in hypertrophic cardiomyopathy patients without documented atrial fibrillation

Background

Ischemic stroke is a common complication in patients with hypertrophic cardiomyopathy (HCM) (1). Although atrial fibrillation (AF) is a well-established risk factor for ischemic stroke in HCM, the risk of ischemic stroke in patients with HCM without documented AF is less recognized (1, 2). This study aimed to determine the risk of ischemic stroke and identify its risk factors in patients with HCM without documented AF.

Methods

This nationwide population-based cohort study used the Korean National Health Insurance database. After excluding patients with a prior history of AF, thromboembolic events, cancer, or the use of anticoagulants, we identified 8,328 HCM patients without documented AF and 1:2 propensity score-matched 16,656 non-HCM controls. The clinical outcome was an incident ischemic stroke.

Results

During a mean follow-up of approximately 6 years, ischemic stroke occurred in 328/8,328 (3.9%) patients with HCM and 443/16,656 (2.7%) controls. Among individuals who developed ischemic stroke, the proportion of AF concomitantly detected accounted for 26.5% (87/328) and 5.8% (26/443) in the HCM and control groups, respectively. The overall incidence of ischemic stroke was 0.716/100 person-years in the HCM group, which was significantly higher than that in the control group (0.44/100 person-years) (HR 1.643; 95% CI, 1.424–1.895; P<0.001, Figure 1). The subgroup analysis according to age, sex, and comorbidities (chronic heart failure, hypertension, dyslipidemia, and vascular disease) consistently demonstrated a higher risk of ischemic stroke in the HCM group (P for interaction >0.05). In the HCM group, age ≥65 years (adjusted hazard ratio [HR] 2.741; 95% confidence interval [CI], 2.156–3.486; P<0.001) and chronic heart failure (adjusted HR 1.748; 95% CI, 1.101–2.745; P=0.018) were independent risk factors for ischemic stroke. Overall incidence was 1.360/100 in patients with HCM aged ≥65 and 2.315/100 person-years years in those with chronic heart failure, respectively. Also, compared to controls aged <65 years and without CHF, adjusted HR for ischemic stroke was 4.756 (95% CI 3.807–5.867) in patients with HCM aged ≥65 years and 2.539 (95% CI 1.638–3.936) in those with CHF, respectively (Figure 2).

Conclusions

Patients with HCM without documented AF are at a higher risk of ischemic stroke than the propensity score-matched general population. Age ≥65 years and chronic heart failure are two strong independent risk factors for ischemic stroke in this population.

Funding Acknowledgement

Type of funding sources: None.

Improved Bioavailability of Poorly Water-Soluble Drug by Targeting Increased Absorption through Solubility Enhancement and Precipitation Inhibition

Itraconazole (ITZ) is a class II drug according to the biopharmaceutical classification system. Its solubility is pH 3-dependent, and it is poorly water-soluble. Its pKa is 3.7, which makes it a weak base drug. The aim of this study was to prepare solid dispersion (SD) pellets to enhance the release of ITZ into the gastrointestinal environment using hot-melt extrusion (HME) technology and a pelletizer. The pellets were then filled into capsules and evaluated in vitro and in vivo. The ITZ changed from a crystalline state to an amorphous state during the HME process, as determined using DSC and PXRD. In addition, its release into the gastrointestinal tract was enhanced, as was the level of ITZ recrystallization, which was lower than the marketed drug (Sporanox^®), as assessed using an in vitro method. In the in vivo study that was carried out in rats, the AUC_0-48h of the commercial formulation, Sporanox^®, was 1073.9 ± 314.7 ng·h·mL^-1, and the bioavailability of the SD pellet (2969.7 ± 720.6 ng·h·mL^-1) was three-fold higher than that of Sporanox^® (*** p < 0.001). The results of the in vivo test in beagle dogs revealed that the AUC_0-24h of the SD-1 pellet (which was designed to enhance drug release into gastric fluids) was 3.37 ± 3.28 μg·h·mL^-1 and that of the SD-2 pellet (which was designed to enhance drug release in intestinal fluids) was 7.50 ± 4.50 μg·h·mL^-1. The AUC of the SD-2 pellet was 2.2 times higher than that of the SD-1 pellet. Based on pharmacokinetic data, ITZ would exist in a supersaturated state in the area of drug absorption. These results indicated that the absorption area is critical for improving the bioavailability of ITZ. Consequently, the bioavailability of ITZ could be improved by inhibiting precipitation in the absorption area.

Modulation of the clinically accessible gelation time using glucono-d-lactone and pyridoxal 5'-phosphate for long-acting alginate in situ forming gel injectable

The purpose of this study was to design alginate in situ forming gel (ISFG) injectable with clinically acceptable gelation time and controlled release of hydrophobic drug. Milled or unmilled paliperidone palmitate (PPP) was used. The gelation time was controlled by varying the ratios of glucono-d-lactone (GDL) and pyridoxal 5'-phosphate (PLP) in prefilled alginate solution mixtures (ASMs) containing PPP, CaCO₃, GDL and PLP for clinically acceptable injectability. However, the gelation time was varied by the alginate type (M/G ratio), storage condition, and drug solubilizers. This ISFG exhibited 32.15 kPa of the maximal compressive stress without causing pain and stiffness. The ISFG containing conically milled PPP released PPP in a controlled manner without exhibiting any initial burst release for 4 weeks. The current alginate ISFG injectable using new combination of PLP and GDL could be used to deliver long-acting injectable drugs.

Impact of atrial fibrillation on the progression and outcomes of isolated mild functional tricuspid regurgitation

Background

Atrial fibrillation (AF) is increasingly recognized as a cause of tricuspid regurgitation (TR) in the structurally normal tricuspid valve. However, there are limited data regarding the impact of AF on TR progression and its long-term cardiovascular outcomes.

Purpose

We aimed to investigate the association of AF with the significant TR progression and its impact on clinical outcomes among patients with isolated mild functional TR.

Methods

We studied 834 patients with mild function TR identified on the echocardiography between 2007 and 2019, whose follow-up echocardiography beyond 1-year was available. Major exclusion criteria were the overt causes of primary and secondary TR (i.e., concomitant left-sided heart disease). Primary endpoint was the significant TR progression to more than a moderate degree on the follow-up echocardiography. Composite cardiac event was defined as cardiovascular death, TR surgery, and heart failure admission due to TR.

Results

Of 834 patients with isolated mild functional TR (mean age 65.6 years, 41% men), 292 (35.0%) patients had AF at the baseline. Patients with AF were older and had larger left atrium compared to those without. During the median of 4.55 years follow-up (interquartile interval 2.56–7.24 years), 36 patients developed a significant TR ≥ moderate degree. The cumulative rate of TR progression was significantly higher in patients with AF than those without (11.3% versus 0.6%, P&lt;0.001) (Figure 1). Multivariable Cox analyses showed that AF was associated with a 3-fold higher risk of TR progression (adjusted hazard ratio 3.50, 95% confidence interval 1.42–8.65). Regarding the cardiovascular outcomes, patients who developed significant TR had a higher rate of composite cardiac events compared to those who did not (cardiac events: 38.9% versus 6.3% P&lt;0.001) (Figure 2).

Conclusions

AF is a strong risk factor for TR progression among patients with isolated mild functional TR. In addition, the development of significant TR is associated with worse cardiovascular outcomes. These findings highlight the important pathophysiology of AF on TR development and its clinical consequences.

Funding Acknowledgement

Type of funding sources: None.

Release kinetics of hydroxypropyl methylcellulose governing drug release and hydrodynamic changes of matrix tablet

BACKGROUND

Hydrophilic hydroxypropyl methylcellulose (HPMC) matrix tablets are the standard role model of the oral controlled-release formulation. Nevertheless, the HPMC kinetics for the mechanistic understanding of drug release and hydrodynamic behaviors are rarely investigated. This study aims to investigate the release behaviors of both HPMC and paracetamol (model drug) from the hydrophilic matrix tablet.

METHODS

Two different viscosity grades of HPMC were used (Low viscosity: 6 cps, High viscosity: 4,000 cps). Three different ratios of drug/HPMC (H:38.08%, M:22.85%, and L:15.23% (w/w) of HPMC amounts in total weight) matrix tablets were prepared by wet granulation technique. The release profiles of the drug and HPMC in a matrix tablet were quantitatively analyzed by HPLC and 1H-nuclear magnetic resonance (NMR) spectroscopy. The hydrodynamic changes of HPMC were determined by the gravimetric behaviors such as swelling and erosion rates, gel layer thickness, front movement data,and distributive near-infrared (NIR) chemical imaging of HPMC in a matrix tablet during the dissolution process.

RESULTS

High viscosity HPMC tablets showed slower release of HPMC than the release rate of drug, suggesting that drug release preceded polymer release.Different hydration phenomenon was qualitatively identified and corresponded to the release profiles. The release behaviors of HPMC and drug in the tablet could be distinguished with the significant difference with fitted dissolution kinetics model (Low viscosity HPMC 6cps; Korsmeyer-Peppas model, High viscosity HPMC 4000cps; Hopfenberg model, Paracetamol; Weibull model) according to the weight of ingredients and types of HPMC.

CONCLUSION

The determination of HPMC polymer release correlating with drug release, hydrodynamic behavior, and NIR chemical imaging of HPMC can provide new insights into the drug release-modulating mechanism in the hydrophilic matrix system.

Effect of pH adjustment and ratio of oppositely charged polymers on the mechanistic performance and sustained release of volatile perfume in interpolyelectrolyte complex microcapsules

In this study, volatile perfume was encapsulated in microcapsules (MCs) via interpolyelectrolyte complexes (IPECs) of oppositely charged polymers, with high encapsulation efficiency, to be delivered in a sustained manner. Positively charged chitosan (CTS) and negatively charged Eudragit® S100 (ES100) were used as eco-friendly biopolymers. Limonene (LMN) was selected as the model perfume. First, the solution of LMN in ethyl acetate and poloxamer 407 (POX407) in acidic solution was emulsified using ultrasonication. CTS and ES100 were added in that particular order to form o/w emulsion. LMN-loaded microcapsules (LMN-MCs) were prepared by adjusting the pH and freeze-drying for solidification. The electrostatic interactions of CTS and ES100 to form IPECs were highly dependent on pH, changing in the microscopic images of emulsion droplets and zeta potential. The NH₃⁺ group of CTS and the COO^- group of ES100 caused the electrostatic interactions at a specific pH. The formation mechanism of LMN-MCs was successfully validated using instrumental analysis, charge density, and energy dispersive X-ray spectrometer (EDS) mapping. Encapsulation efficiency, loading content, and release rates of LMN-MCs varied according to the ratios of CTS and ES100, demonstrating optimal performance at a 1:1 ratio. The current LMN-MCs could provide a simple manufacturing process with high performance in terms of encapsulation efficiency (>94%), drug loading, yield and sustained release of volatile perfume for 120 h.

Development and Validation of an LC-MS/MS Assay to Quantitate 2',4',6'-Trihydroxyacetophenone in Rat and Dog Plasma and its Application to a Pharmacokinetic Study

In the present study, a simple, rapid, and reliable bioanalytical method was developed using liquid chromatography with tandem-mass spectrometry (LC-MS/MS) to quantify 2',4',6'-trihydroxyacetophenone (THAP) in rat and dog plasma with 2',4',6'-trihydroxybenzaldehyde as an internal standard (IS). The LC-MS/MS instrument was operated in the multiple reaction monitoring (MRM) mode to detect THAP at m/z transition 166.89 > 82.8 and IS at 152.89 > 82.8, respectively. A simple, one-step protein precipitation (PP) method was employed with acetonitrile for sample preparation. Utilizing a Gemini C18 column, THAP and IS were separated with an isocratic mobile phase consisting of 10 mM ammonium acetate and methanol (10:90, v/v) at a flow rate of 0.2 mL/min. Total chromatographic run time was 2.5 min per sample injection. The standard calibration curve for THAP was linear (r2 ≥ 0.9987) over the concentration range of 0.1 to 100 µg/mL with the lower limit of quantitation (LLOQ) of 0.1 µg/mL (S/N ratio > 10). According to the regulatory guidelines from the U.S. Food and Drug Administration (FDA) and the Korea Ministry of Food and Drug Safety (MFDS), our newly developed biomedical analytical method was fully and adequately validated in terms of selectivity, sensitivity, linearity, intra- and inter-day precision and accuracy, recovery, matrix effect, stability, and dilution integrity. Our validated assay was successfully utilized in a nonclinical pharmacokinetic study of THAP in rats and dogs.

Fabrication of Intragastric Floating, Controlled Release 3D Printed Theophylline Tablets Using Hot-Melt Extrusion and Fused Deposition Modeling

This work presents a novel approach for producing gastro-retentive floating tablets (GRFT) by coupling hot-melt extrusion (HME) and fused deposition three-dimensional printing (3DP). Filaments containing theophylline (THEO) within a hydroxypropyl cellulose (HPC) matrix were prepared using HME. 3DP tablets with different infill percentages and shell thickness were developed and evaluated to determine their drug content, floating behavior, dissolution, and physicochemical properties. The dissolution studies revealed a relationship between the infill percentage/shell thickness and the drug release behavior of the 3DP tablets. All the developed GRFTs possessed the ability to float for 10 h and exhibited zero-order release kinetics. The drug release could be described by the Peppas-Sahlin model, as a combination of Fickian diffusion and swelling mechanism. Drug crystallinity was found unaltered throughout the process. 3DP coupled with HME, could be an effective blueprint to produce controlled-release GRFTs, providing the advantage of simplicity and versatility compared to the conventional methods.

Tooth Loss Predicts Myocardial Infarction, Heart Failure, Stroke, and Death

We investigated whether oral health, represented by missing teeth, was associated with an increased risk of cardiovascular disease, including myocardial infarction (MI), heart failure (HF), stroke, and all-cause mortality. Subjects who underwent routine dental examinations and health checkups provided by the Korean National Health Insurance from 2007 to 2008 ( n = 4,440,970) were followed up for incident MI, HF, stroke, and death until 2016. During follow-up of 7.56 y, 68,063 (1.5%) subjects died, and 31,868 (0.7%) were admitted for MI, 22,637 (0.5%) for HF, and 30,941 (0.7%) for stroke. Cardiovascular events and mortality increased in proportion to tooth loss. Tooth loss was an independent risk factor for cardiovascular events after multivariable analysis adjusted for cardiovascular risk, behavioral, and income factors. Each missing tooth was associated with an approximately 1% increase in MI (HR, 1.010; 95% CI, 1.007 to 1.014), 1.5% increase in HF (HR, 1.016; 95% CI, 1.013 to 1.019) and stroke (HR, 1.015; 95% CI, 1.012 to 1.018), and 2% increase in mortality (HR, 1.022; 95% CI, 1.020 to 1.023). Having ≥5 missing teeth substantially increased risk for cardiovascular outcomes, and even a small number of missing teeth (1 to 4) was associated with an increased risk for MI, stroke, and death. This association was consistent in subgroup analyses and especially strong among the younger subjects (age <65 y) and those with periodontitis. In this large Korean nationwide cohort study, we found that tooth loss showed a dose-dependent association with incident MI, HF, ischemic stroke, and all-cause death and was a good predictor of cardiovascular outcome. In clinical practice, the number of missing teeth can aid physicians in discriminating patients with a higher cardiovascular risk.

P1274 Early surgery versus watchful waiting in patients with moderate aortic stenosis and left ventricular systolic dysfunction

Background

Aortic stenosis (AS) induces significant pressure overload to the left ventricle (LV) and its burden may increase if there is concomitant LV systolic dysfunction. Severe AS with LV systolic dysfunction is a class I indication for aortic valve replacement (AVR) irrespective of symptoms, however, this recommendation is not well established in those with moderate AS and LV systolic dysfunction. In this study, we sought to investigate the clinical impact of surgical AVR among patients with moderate AS and LV systolic dysfunction.

Methods

From 2001 to 2017, we retrospectively but consecutively identified patients with moderate AS and LV systolic dysfunction from a single tertiary hospital. Moderate AS was defined as aortic valve area between 1.0 and 1.5cm2 and LV systolic dysfunction as LV ejection fraction less than 50%. The primary outcome was all-cause death and we additionally analyzed cardiac death as a secondary endpoint. The outcomes were compared between those who underwent early surgical AVR at the stage of moderate AS versus those who were followed without AVR at the outpatient clinic.

Results

Among a total of 257 patients with moderate AS and concomitant LV systolic dysfunction (70.0 ± 11.3 years, 63.4% of male), 34 patients received early AVR. Patients in the AVR group was younger than the observation group (64.2 ± 8.1 vs. 70.9 ± 11.5, respectively), and had a lower prevalence of hypertension and chronic kidney disease. During a mean of 3-year follow up, 112 patients (47.5%) died and the overall death rate was 15.367 per 100 person-year (PY). The AVR group showed a significantly lower rate of all-cause death than the observation group (5.241PY vs. 18.160PY, p-value = 0.002). After multivariable Cox proportional hazard regression adjusting for age, sex, comorbidities and laboratory data, early AVR at the stage of moderate AS significantly reduced the risk of all-cause death (hazard ratio [HR] 0.340, 95% confidence interval [CI] 0.117 - 0.985, p-value = 0.047). However, there was no risk reduction of cardiac death (HR 0.578 95% CI 0.150 - 2.231, p-value = 0.426).

Conclusions

In patients with moderate AS and LV systolic dysfunction, AVR reduces the risk of all-cause death. A prospective design study is warranted to confirm our findings in the near future.

Abstract P1274 Figure. Kaplan-Meier curves for deaths

P1603 Changes of cardiac function in cirrhotic patients after liver transplantation

Funding Acknowledgements

This study was supported by the grant of CJ healthcare 2016 research fund.

Background

Liver cirrhosis (LC) has been known to affect cardiovascular performance. Limited study have evaluated the alteration of myocardial function in patients with LC after liver transplantation (LT).

Purpose

The aim of study was to evaluate changes of cardiac function in patients with cirrhosis following LT using conventional and speckle-tracking echocardiography and late gadolinium enhancement (LGE) of cardiac magnetic resonance (MR).

Methods

Thirty-five patients with cirrhosis (mean age, 57.1 ± 9.0; male, 75%) who were listed for LT were prospectively enrolled. Patients underwent conventional, speckle-tracking echocardiography, and cardiac MR imaging with LGE. Echocardiography and cardiac MR were performed at pre and 1 year after LT. Cirrhotic patients were compared with normal control (n = 20, mean age, 65.0 ± 14.8; men, 11(55%)) and echocardiographic and cardiac MR data were compared pre and post LT.

Results

Conventional and speckle-tracking echocardiography and Cardiac MR imaging demonstrated hyperdynamic left ventricular (LV) function in patients with cirrhosis (LV ejection fraction (EF) with cardiac MR 67.8 ± 7.0% in LC vs. 63.4 ± 6.4% in control, P = 0.028; global longitudinal strain (GLS) -24.3 ± 2.6% in LC vs. -18.6 ± 2.2% in control, P &lt; 0.001). There were no LGE in patients with cirrhosis and no significant differences in LV size, LV wall thickness, LV mass index, and diastolic function between cirrhotic patients and control group (all P &gt; 0.1). Corrected QT interval (QTc) in electrocardiogram was prolonged in LC patients (P &lt; 0.001). One-year after LT, LV end-diastolic diameter and LV end-diastolic volume significantly decreased (P = 0.016 and 0.022, respectively). Although LVEF showed no significant changes 1 year post-LT (P = 0.362), LV-GLS (from -24.7 ± 1.8% to -20.8 ± 3.4%, P &lt; 0.001) significantly decreased. QTc interval also decreased 1 year after LT (from 470.4 ± 29.6msec to 428.2 ± 31.6msec, P = 0.001).

Conclusions

The present study demonstrated that cirrhotic patients showed hyperdynamic circulation and prolonged QTc interval compared with normal controls. After 1 year LT, LV size reduced and augmented LV function was normalized. Given that no LGE in cardiac MR and normalized GLS and QTc after LT, cardiac dysfunction in LC patients could be reversed by LT.

P1368 Effect of angiotensin receptor blocker in patients with moderate or severe aortic stenosis: a randomized controlled trial

Funding Acknowledgements

This study was supported by grants from Boryung Pharmacy Research Fund.

Background/Introduction: Pathophysiology of aortic stenosis (AS) and several previous studies suggested the potential role of angiotensin receptor blocker (ARB) in patients with AS.

Purpose

We aimed to investigate the effects of Fimasartan, an ARB, on exercise capacity and progression of AS in patients with moderate to severe AS.

Methods

We conducted a prospective, randomized, double-blind, placebo-controlled trial in 32 normotensive or controlled-hypertensive patients with moderate or severe AS. Study participants were randomized to Fimasartan 30 mg to 60 mg daily (n = 14) or placebo (n = 18) for 1 year, and underwent cardiopulmonary exercise test, 6-minute walk test, and echocardiography at 0, 6, and 12 months, with follow-up data available in 29 subjects.

Results

Significant reductions in blood pressures were observed in the Fimasartan group but not in the placebo group. Two of the 14 patients in the Fimasartan group withdrew the study due to mild symptoms probably related with the decreased blood pressure, and one patient decline the study protocol. After the 12-month treatment, the peak oxygen consumption (VO2; the primary outcome) in the Fimasartan group was significantly decreased (from 28.3 ± 5.9 to 25.4 ± 3.8 mL/min/kg, P = 0.021) but not in the placebo group (P for interaction = 0.046) (Figure 1A). The severity of AS showed a gradual progression in both groups, without inter-group differences (mean transaortic pressure; Fimasartan group, +4.0 ± 3.8 mmHg/year; placebo group, +5.3 ± 6.2 mmHg/year; P for interaction = 0.429) (Figure 1B). Parameters of left ventricular systolic and diastolic function did not change in both groups.

Conclusions

The use of ARB impaired exercise capacity in patients with moderate or severe AS, and did not prevent the progression of AS. However, due to the small number of participants, further studies are required to confirm these findings.

Abstract P1368 Figure.

P785 Left ventricular geometry and myocardial contractility modulate impact of statins on prognosis in patients with acute heart failure

Funding Acknowledgements

N/A

Background/Introduction: The benefit of statins in patients with heart failure (HF) remains controversial and the mechanism of action is largely speculative. We investigated whether survival benefit with statins differs according to left ventricular (LV) geometry and myocardial contractility in acute HF patients.

Methods

We enrolled 1792 acute HF patients receiving statins and 2296 patients not receiving statins admitted from 2009 to 2016. The LV and right ventricular (RV) global longitudinal strain (GLS) was assessed as a measure of myocardial contractility. Patients were classified into 2 groups based on ischemic etiology of HF and further divided into 4 subgroups according to the median values of LV-GLS or RV-GLS. The primary outcome was 5-year all-cause mortality. The study protocol was approved by the ethics committee at each institute and complied with the Declaration of Helsinki. The need for written informed consent was waived.

Results

During the 5-year follow-up, 1740 (40.4%) patients died and they had more unfavorable baseline characteristics. Statin therapy was significantly associated with improved survival in overall patients and in both groups with and without ischemic etiology (all p &lt;0.001). Patients with concentric remodeling/hypertrophy and eccentric hypertrophy demonstrated survival benefit with statin therapy (P = 0.033, 0.004, and 0.008, respectively), while those with normal geometry did not (p = 0.123). In the non-ischemic HF group, survival benefit with statin therapy was confined to patients with low LV-GLS (p = 0.045) or those with low RV-GLS p = 0.003). On the contrary, in ischemic HF group, survival benefit with statin therapy was observed in all patients regardless of the values of LV-GLS or RV-GLS. Significant interactions were present between statin use and diabetes mellitus and IHD (p for interaction = 0.027 and 0.003, respectively) regarding mortality.

Conclusions

LV geometry and myocardial contractility may modulate the effects of statins in patients with acute HF. These echocardiographic measures can provide prognostic information to guide tailored statin treatment in this population. Our findings may also help to develop more well-designed prospective studies, in terms of a more homogenous study population, to confirm survival benefit with statin therapy.

Abstract P785 Figure. Multivariate Cox survival curves

Utilization of a fattigation platform gelatin-oleic acid sodium salt conjugate as a novel solubilizing adjuvant for poorly water-soluble drugs via self-assembly and nanonization

Solubilizing adjuvants are commonly used to dissolve insoluble drugs by simply adding in a formulation. In this study, gelatin and oleic acid sodium salt (OAS), a generally recognized as safe-listed material were chosen and conjugated to develop a natural solubilizing adjuvant using the fattigation platform technology to enhance solubility and dissolution rate of poorly water-soluble drugs according to self-assembly and nanonization principle when simply mixed with poorly water-soluble drugs. We synthesized the gelatin and OAS conjugates (GOC) at three different ratios (1:1, 1:3, 1:5; GOC 1, GOC 2, and GOC 3, respectively) via the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide reaction using a spray dryer. This amphiphilic micronized GOC was self-assembled into nanoparticles. The synthesis of new amphiphilic conjugates was identified through Fourier transform-infrared (FT-IR) spectroscopy. The powder properties of the GOCs, such as angle of repose, bulk density, and tapped density were varied with the oleic acid bonding ratio. Then, GOCs were utilized to investigate the enhanced solubility and release rate of various poorly water-soluble drugs such as cilostazol (CSZ), coenzyme Q10, ticagrelor, telmisartan, aprepitant and itraconazole as model drugs. Based on the solubility studies by concentration and type of GOCs, 3% GOC 2 was selected. When this GOC was mixed with these model drugs by the physical mixing, wetting and hot melting methoods, the solubility was highly enhanced compared to the pure control drug, ranging from 20 to 150,000 times. In case of CSZ, all formulations were significantly improved release rate compared to the of CSZ alone and the reference tablet, cilostan® (Korea United Pharm) in simulated intestinal fluid containing 0.2% sodium lauryl sulfate. Differential scanning calorimetry and powder X-ray diffraction were conducted to confirm the crystal polymorphic structure of CSZ, and as a result they changed to diminutive peak intensity compared to CSZ alone. Field-emission scanning electron microscopy indicated that GOC was round with a reduced size of about 100 nm. The reduction of drug particles via nanonization and self-assembly of amphiphilic GOC in an aqueous media could be a key factor to improve poor water solubility by providing a favorable dispersion of drug molecules in an amphiphilic network.

Customized Novel Design of 3D Printed Pregabalin Tablets for Intra-Gastric Floating and Controlled Release Using Fused Deposition Modeling

Three-dimensional (3D) printing has been recently employed in the design and formulation of various dosage forms with the aim of on-demand manufacturing and personalized medicine. In this study, we formulated a floating sustained release system using fused deposition modeling (FDM). Filaments were prepared using hypromellose acetate succinate (HPMCAS), polyethylene glycol (PEG 400) and pregabalin as the active ingredient. Cylindrical tablets with infill percentages of 25%, 50% and 75% were designed and printed with the FDM printer. An optimized formulation (F6) was designed with a closed bottom layer and a partially opened top layer. Filaments and tablets were characterized by means of fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), and thermogravimetric analysis (TGA). The results show that the processing condition did not have a significant effect on the stability of the drug and the crystallinity of the drug remained even after printing. A dissolution study revealed that drug release is faster in an open system with low infill percentage compared to closed systems and open systems with a high infill ratio. The optimized formulation (F6) with partially opened top layer showed zero-order drug release. The results show that FDM printing is suitable for the formulation of floating dosage form with the desired drug release profile.

P3429A novel prediction model for mortality after cardiac surgery using institutional case volume

Purpose

A number of risk prediction models have been developed to identify short term mortality after cardiovascular surgery. Most models include patient characteristics, laboratory data, and type of surgery, but no consideration for the amount of surgical experience. With numerous reports on the impact of case volume on patient outcome after high risk procedures, we attempted to develop a risk prediction models for in-hospital and 1-year mortality that takes institutional case volume into account.

Methods

We identified adult patients who underwent cardiac surgery from January 2008 to December 2017 from the National Health Insurance Service (NHIS) database by searching for patients with procedure codes of coronary artery bypass grafting, valve surgery, and surgery on thoracic aorta during the hospitalization. Study subjects were randomly assigned to either the derivation cohort or the validation cohort. In-hospital mortality and 1-year mortality data were collected using the NHIS database. Risk prediction models were developed from the derivation cohort using Cox proportional hazards regression. The prediction performances of models were evaluated in the validation cohort.

Results

The models developed in this study demonstrated fair discrimination for derivation cohort (N=22,004, c-statistics, 0.75 for in-hospital mortality; 0.73 for 1-year mortality) and acceptable calibration in the validation cohort. (N=22,003, Hosmer-Lemeshow χ2-test, P=0.08 and 0.16, respectively). Case volume was the key factor of mortality prediction models after cardiac surgery. (50≤ x <100 case per year. 100≤ x <200 case per year, ≥200 case per year are correlated with OR 3.29, 2.49, 1.85 in in-hospital mortality, 2.76, 1.99, 1.69 in 1-year mortality respectively, P value <0.001.)

Annual case volume as risk factor Variables In-hospital mortality 1-year mortality OR (95% CI) p-value OR (95% CI) p-value Annual case-volume (reference: ≥200) – – 100–200 1.69 (1.48, 1.93) <0.001 1.85 (1.58, 2.18) <0.001 50–100 1.99 (1.75, 2.25) <0.001 2.49 (2.15, 2.89) <0.001 <50 2.76 (2.44, 3.11) <0.001 3.29 (2.85, 3.79) <0.001 OR: Odds ratio; CI: confidence interval; Ref: Reference.

Discrimination and calibration

Conclusion

We developed and validated new risk prediction models for in-hospital and 1-year mortality after cardiac surgery using the NHIS database. These models may provide useful guides to predict mortality risks of patients with basic information and without laboratory findings.

Clinical Impact of a Protocolized Kidney Donor Follow-up System

BACKGROUND

Adequate kidney donor management after donation is increasingly emphasized due to concerns of renal function impairment after nephrectomy with increasing life expectancy. In this study, the clinical impact of a protocolized kidney donor follow-up system by nephrologists was evaluated.

METHODS

A total of 427 living kidney donors underwent nephrectomy from January 2010 to December 2014 and were followed for at least 2 years at the Samsung Medical Center. Donors were followed-up by nephrologists after the establishment of a donor clinic with systemized protocols in January 2013. The primary outcomes were incidence of post-donation low estimated glomerular filtration rate (eGFR) and renal function adaptability. Secondary outcomes were changes in compliance and incidence of hyperuricemia and microalbuminuria.

RESULTS

The patients were divided into 2 groups according to the time of nephrectomy: the pre-donor clinic period (n = 182) and the donor clinic period (n = 172). Preoperative eGFR in patients in the pre-donor clinic period was higher than that in patients in the donor clinic period. After donation, poor renal adaptation was less frequent in the donor clinic period compared to the pre-donor clinic period. Low eGFR tended to be less common during the donor clinic period. Shorter mean outpatient clinic visit intervals with more visits within 6 months after donation and earlier detection of de novo hyperuricemia were found during the donor clinic period.

CONCLUSION

A protocolized donor clinic run by nephrologists may improve post-nephrectomy renal outcomes and compliance and facilitate better management of potential risk factors of chronic kidney disease in donors.

Transfer printing of vertical-type microscale light-emitting diode array onto flexible substrate using biomimetic stamp

We report the transfer printing of GaN-based microscale vertical-type light-emitting diodes (μ-VLEDs) using a functional layer and a biomimetic stamp. An oxide-based functional layer is inserted onto the structure of a μ-VLED and used to separate the chip from the μ-VLED wafer by absorbing the pulse of a UV pulse laser during pick-up of the transfer printing process. Polydimethylsiloxane (PDMS)-based biomimetic stamps have been fabricated to mimic the gecko lizard cilia for improved adhesion and repeatability. The biomimetic stamp has an adhesion force of 25.6 N/cm², which is 12 times the adhesion of a flat stamp; an adhesion force of 10 N/cm² or more was maintained after 100,000 repeated adhesion tests. A flexible 10 × 10 prototype array on a polyimide substrate was fabricated, and its bending test results indicated that the strain effect on the forward voltage and the output power was less than 1%. The stable bending test results of the prototype indicate that μ-VLEDs using biomimetic stamps allow the necessary stability for practical transfer printing.

Investigation of Crystallization and Salt Formation of Poorly Water-Soluble Telmisartan for Enhanced Solubility

The crystal changes and salt formation of poorly water-soluble telmisartan (TEL) in various solvents were investigated for enhanced solubility, stability and crystallinity. Polymorphic behaviors of TEL were characterized by dispersing in distilled water, acetone, acetonitrile, DMSO, or ethanol using Method I: without heat and then dried under vacuum at room temperature; and Method II: with heat below boiling temperature, cooled at 5 °C, and then dried under vacuum at 40 °C. For salt formation (Method III), the following four powdered mixtures were prepared by dispersing in solution of hydrochloric acid (HCl) (pH 1.2), TEL/HCl; in simulated gastric fluid (pH 1.2 buffer), TEL/simulated gastric fluid (SGF); in intestinal fluid (pH 6.8 buffer), TEL/simulated intestinal fluid (SIF); or in NaOH (pH 6.8), TEL/NaOH, respectively, and then dried under a vacuum at room temperature. The structures of powdered mixtures were then studied using a field emission scanning electron microscope (FESEM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), FTIR, ¹H nuclear magnetic resonance (¹H-NMR), and LC⁻MS. The solubility of TEL in powdered forms was performed in pH 6.8, pH 1.2, and distilled water. No polymorphic behaviors of TEL were observed in various solvents as characterized by FESEM, DSC, PXRD, and FTIR. However, the structural changes of powdered mixtures obtained from Method III were observed due to the formation of salt form. Moreover, the solubility of salt form (TEL/HCl) was highly increased as compared with pure TEL. There were no significant changes of TEL/HCl compared with TEL in the content assay, PXRD, DSC, and FTIR during stressed storage conditions at 40 °C/75% relative humidity (RH) for 4 weeks under the closed package condition. Therefore, the present study suggests the new approach for the enhanced stability and solubility of a poorly water-soluble drug via salt form.

Preparation of Sustained Release Tablet with Minimized Usage of Glyceryl Behenate Using Post-Heating Method

The purpose of this study was to prepare sustained release (SR) matrix tablets using a direct compression incorporated with a post-heating process. Allopurinol was selected due to the water-soluble property and Compritol 888 ATO® (also known as glyceryl behenate) was used as an SR matrix-forming agent. The API, SR material, microcrystalline cellulose, and magnesium stearate (lubricant) were mixed and prepared into a tablet by a direct compression method. The compressed tablets were stored in a dry oven at four temperatures (60, 70, 80, and 90°C) and for three time periods (15, 30, 45 min). The DSC and PXRD data indicated that the crystallinity of the API was not altered by the post-heating method. However, SEM images demonstrated that Compritol 888 ATO® was melted by the post-heating method, and that the melted Compritol 888 ATO® could form a strong matrix. This strong matrix led to the significant sustained release behavior of hydrophilic APIs. As little as 3 mg of Compritol 888 ATO® (0.65% of total tablet weight), when heated at 80°C for 15 min, showed sustained release over 10 h. The post-heating method exerted a significant influence on lipid-based matrix tablets and allowed a reduction in the amount of material required for a water-soluble drug. This will also provide a valuable insight into lipid-based SR tablets and will allow their application to higher quality products and easier processing procedures.

In Vitro-In Vivo Correlation Using In Silico Modeling of Physiological Properties, Metabolites, and Intestinal Metabolism

BACKGROUND

Recently, pharmaceutical research has focused on in vitro-in vivo correlation as a novel challenge, and in silico modeling has been an important component. As in silico models are highly representative of practical use, regulatory agencies such as the US Food and Drug Administration and European Medicines Agency have recognized and utilized in silico modeling as a useful tool; this allows pharmaceutical organizations to use Physiologically Based Pharmacokinetic (PBPK) models for decision-making, which may aid the financial efficiency of a clinical trial. However, some studies have shown differences of up to approximately 40% in pharmacokinetic parameters such as area under the curve or maximum serum concentration between observed and simulated data.

METHODS

Gastroplus™ was used to demonstrate current PBPK simulation. 46 research papers were compared with each other's applications of PBPK simulation.

RESULTS

To improve the accuracy of simulation, additional factors may need to be considered, such as precise volume of gastrointestinal sections, specific metabolism of the target drug, and physicochemical data of drug metabolites. Furthermore, the results of these simulations would be extremely valuable to the relevant applications. Simulation programs using Advanced Compartmental Absorption and Transit (ACAT)/PBPK modeling could be a powerful tool for companies performing pre-clinical experiments, and could provide a solution for the ethical issues and economic constraints of clinical trials.

CONCLUSION

If in silico modeling produced more precise results that could closely match clinical data, it could be more readily used to screen drug pharmacodynamics in bodily systems, and the efficiency of clinical trials would be improved. However, simulation programs are currently limited in their accuracy of pharmacodynamic predictions. In developing new drugs, pharmaceutical companies should address this issue in order to improve in silico/PBPK modeling in the future.

Differences in the oral health status and oral hygiene practices according to the extent of post-stroke sequelae

Oral health and hygiene are crucial parameters in stroke patients. However, few studies have evaluated the oral health status and oral hygiene practices according to the level of function in stroke patients. The aim of this study was to evaluate the oral health status and oral hygiene practices according to ambulation and personal hygiene levels in patients with stroke. Data from the fifth (2010-2012) and sixth (2013-2015) editions of the Korea National Health and Nutrition Examination Survey (KNHANES) for 6 years were combined. A total of 700 stroke patients were enrolled in our study. Subjective oral health was significantly poorer in patients who experienced a moderate problem with walking (adjusted OR [AOR], 1.68; 95% CI, 1.21-2.33) and bed-bound patients (AOR, 2.92; 95% CI, 1.01-8.44) than in patients who could walk without difficulty. Patients who were unable to bathe or dress independently exhibited a significantly higher risk of dental caries than did those who could perform the same activities unassisted. The probability of brushing teeth ≥2 times daily was 69% lower in bed-bound patients (AOR, 0.31; 95% CI, 0.11-0.87) than in patients who could walk without difficulty and 76% lower in patients who were unable to bathe or dress independently (AOR, 0.24; 95% CI, 0.09-0.62) than in those who could perform the same activities without difficulty. There were differences in oral health status and oral hygiene practices, according to ambulation level and functional independence, in the stroke patient group. These results indicate the need for oral care for stroke patients who exhibit ambulatory and functional limitations.

Hydro-nanofibrous mesh deep cell penetration: a strategy based on peeling of electrospun coaxial nanofibers

A two-step strategy for coaxial electrospinning and postelectrospinning is an effective method for fabricating superfine nanofibers composed of highly swellable hydrogels. Alginate and poly(ε-caprolactone) [PCL] were coelectrospun via fibrous meshes with a coaxial nozzle; alginate at the core was subsequently cross-linked in calcium chloride solution. The PCL sheath was removed from the meshes by repeated organic-phase washing. The peeling process was monitored by scanning electron microscopy, transmission electron microscopy, and differential scanning calorimetry, and the complete removal of the PCL outer layers was confirmed by the thinning of the fiber volume. The obtained alginate hydronanofiber showed extreme water-swellability and mass erosion depending on the degree of cross-linking. We also measured the nanoscale and macroscale mechanical properties of a single nanofiber and of the whole mesh by atomic force microscopy and rheometry. Quantitative analysis of nanomechanical properties indicated that the hydronanofiber with higher cross-linking density had higher stiffness and Derjaguin-Müller-Toporov modulus. Cells laid on the mesh and the vertical infiltration distance were visualized and quantified by confocal laser scanning microscopy. Cells on the mesh with higher cross-linking density infiltrated deeply to the bottom of the mesh. Thus, hydrogel-like nanofibrous meshes are versatile matrices allowing for deep infiltration of cells throughout the mesh via manipulation of the mechanical properties of the nanofiber.

Effect of Changes in Body Mass Index on Cardiovascular Outcomes in Kidney Transplant Recipients

BACKGROUND

A higher body mass index (BMI) before kidney transplantation (KT) is associated with increased mortality and allograft loss in kidney transplant recipients (KTRs). However, the effect of changes in BMI after KT on these outcomes remains uncertain. The aim of this study was to investigate the effect of baseline BMI and changes in BMI on clinical outcomes in KTRs.

METHODS

A total of 869 KTRs were enrolled from a multicenter observational cohort study from 2012 to 2015. Patients were divided into low and high BMI groups before KT based on a BMI cutoff point of 23 kg/m². Differences in acute rejection and cardiovascular disease (CVD) between the 2 groups were analyzed. In addition, clinical outcomes across the 4 BMI groups divided by BMI change 1 year after KT were compared. Associations between BMI change and laboratory findings were also evaluated.

RESULTS

Patients with a higher BMI before KT showed significantly increased CVD after KT (P = .027) compared with patients with a lower BMI. However, among the KTRs with a higher baseline BMI, only persistently higher BMI was associated with increased CVD during the follow-up period (P = .003). Patients with persistently higher BMI had significantly decreased high-density lipoprotein cholesterol and increased hemoglobin, triglyceride, and hemoglobin A1c levels. Baseline BMI and post-transplantation change in BMI were not related to acute rejection in KTRs.

CONCLUSIONS

BMI in the 1st year after KT as well as baseline BMI were associated with CVD in KTRs. More careful monitoring of obese KTRs who do not undergo a reduction in BMI after KT is required.

Differential Expression Patterns of Irf3 and Irf7 in Pediatric Lymphoid Disorders

Interferon regulatory factors (IRFs) are multifunctional transcriptional factors. To define the role of IRFs in lymphoid disorders, we determined the expression patterns of IRF3 and IRF7 by immunohistochemistry in 5 normal lymph nodes, 12 reactive hyperplastic lymph nodes, and 27 pediatric lymphomas. IRF3 was prominently expressed in the nuclei of the histiocytes, and was expressed very weakly in the cytoplasm of most of the lymphocytes of the normal lymph nodes. However, IRF7 was expressed strongly in the nuclei of over 50% of the lymphocytes throughout the normal lymph nodes, but the histiocytes and fibroblasts were spared. In the reactive hyperplastic lymph nodes, the number of IRF3- and IRF7-positive cells in the nuclei was elevated. In the lymphomas, the number of IRF3-positive cells in the nucleus appeared to have decreased, and the cells were scattered throughout the lymphoma tissue in no specific pattern. However, in most cases the number of IRF7-positive cells was elevated.

These results suggested that IRF3 was activated principally in the histiocytes and T cells under inflammatory conditions, but IRF3 activation was attenuated in cases of lymphoma. However, the number of IRF7-positive cells was found to be elevated in the reactive hyperplastic lymph nodes and pediatric lymphoma.

Simultaneous Subtotal Pancreatectomy and Streptozotocin Injection for Diabetes Modeling in Cynomolgus Monkeys

BACKGROUND

In an experimental animal model of islet transplantation, stable induction of insulin-dependent diabetes mellitus (IDDM) and islet isolation from donor pancreas are essential. Total pancreatectomy for IDDM induction and islet procurement in nonhuman primates leads to unwanted loss of exocrine function and may lead to morbidities associated with IDDM.

METHODS

IDDM induction with streptozotocin (STZ) is associated with drug toxicity of STZ and necessitates the killing of another animal for islet procurement. In this study, we performed a subtotal pancreatectomy combined with reduced STZ injection to induce IDDM and procure islets in a nonhuman primate model.

RESULTS

Twelve cynomolgus monkeys received low-dose STZ injections (60 mg/kg) simultaneously with subtotal pancreatectomy. All monkeys recovered from the procedure without complications. IDDM was induced in the animals. 57,691 ± 16,050 islets were isolated from the resected pancreas and transplanted into other monkeys.

CONCLUSIONS

Simultaneous subtotal pancreatectomy and low-dose STZ injection represent an effective and safe method to create an animal model of insulin dependence diabetes, while at the same time providing sufficient amounts of fresh islet cells for allotransplantation without requiring killing of additional animals.

Predictive Factors of Renal Adaptation After Nephrectomy in Kidney Donors

BACKGROUND

Despite compensatory hyperfiltration in remaining nephrons following donor nephrectomy, some donors show impaired renal adaptation and low estimated glomerular filtration rate (eGFR). We investigated the factors predicting early renal adaptation after nephrectomy and identified kidney donors at risk of inadequate renal adaptation.

METHODS

A total of 265 living kidney donors from 2010 to 2013 were retrospectively analyzed. Renal function was serially followed for 6 months after the operation. Regression analyses were performed to identify the independent predictors of low eGFR (eGFR <60 mL/min/1.73 m²) and impaired renal adaptation (%Modification of Diet in Renal Disease [MDRD] <66% of baseline eGFR).

RESULTS

A total of 148 donors belonged to the low eGFR group, and changes in eGFR (ΔeGFR) at postoperative (PO) 1 day and 1 month were identified as independent predictors of low eGFR. Impaired renal adaptation was related to age, ΔeGFR PO 2-3 days, and ΔeGFR PO 1 month. Early renal adaptation was associated with age, male gender, and residual kidney computerized tomography angiography (CTA) volume. The best sensitivity and specificity were obtained with a cutoff value of ΔeGFR 31 at PO 1 day and 1 month for predicting low eGFR and with a value of ΔeGFR 27 at PO 2-3 days and 1 month for predicting impaired renal adaptation.

CONCLUSIONS

Our study showed that the degree of early renal adaptation determines subsequent renal function in kidney donors. Closer monitoring and management may be required in old or male donors with small residual CTA kidney volume as well as donors with persistent ΔeGFR >27 within 1 month of nephrectomy.

Major Histocompatibilty Complex-Restricted Adaptive Immune Responses to CT26 Colon Cancer Cell Line in Mixed Allogeneic Chimera

BACKGROUND

Although the induction of mixed allogeneic chimera shows promising clinical tolerance results in organ transplantation, its clinical relevance as an anti-cancer therapy is yet unknown. We introduced a mixed allogenic chimera setting with the use of a murine colon cancer cell line, CT26, by performing double bone marrow transplantation.

METHODS

We analyzed donor- and recipient-restricted anti-cancer T-cell responses, and phenotypes of subpopulations of T cells. The protocol involves challenging 1 × 10⁵ cells of CT26 cells intra-hepatically on day 50 after bone marrow transplantation, and, by use of CT26 lysates and an H-2L^d-restricted AH1 pentamer, flow cytometric analysis was performed to detect the generation of cancer-specific CD4⁺ and CD8⁺ T cells at various time points.

RESULTS

We found that immunocompetence against tumors depends heavily on cancer-specific CD8⁺ T-cell responses in a major histocompatibility complex-restricted manner; the evidence was further supported by the increase of interferon-γ-secreting CD4⁺ T cells. Moreover, we demonstrated that during the effector immune response to CT26 cancer challenge, there was a presence of central memory cells (CD62L^hiCCR7⁺) as well as effector memory cells (CD62L^loCCR7^-). Moreover, mixed allogeneic chimeras (BALB/c to C56BL/6 or vice versa) showed similar or heightened immune responses to CT26 cells compared with that of wild-type mice.

CONCLUSIONS

Our results suggest that the responses of primary immunocompetency and of pre-existing memory T cells against allogeneic cancer are sustained and preserved long-term in a mixed allogeneic chimeric environment.

Design of fixed dose combination and physicochemical characterization of enteric-coated bilayer tablet with circadian rhythmic variations containing telmisartan and pravastatin sodium

The aim of this study was to investigate a fixed dose combination (FDC) of telmisartan (TEL) and pravastatin sodium (PRA) in enteric-coated bilayer tablets, which was designed for once-daily bedtime dose in order to match circadian rhythmic variations of hypertension and cholesterol synthesis and optimize the patient friendly dosing treatment. Due to the poor aqueous solubility of TEL, ternary solid dispersions (SD) consisting of TEL, polyethylene glycol 6000 (PEG 6000) and magnesium oxide (MgO) were designed to enhance its dissolution rate in intestinal fluid. MgO was added as an effective alkalizer to maintain the high microenvironmental pH of the saturated solution in the immediate vicinity of TEL particles because TEL is known to be ionizable but poorly soluble in intestinal fluid. In contrast, PRA is known to be very unstable in low pH conditions. In the SD system, TEL was present in an amorphous structure and formed an intermolecular hydrogen bonding with MgO, giving complete drug release without precipitation in intestinal fluid. In addition, the amount of hydrophilic carrier (PEG 6000) was also a factor. In the design of tablet formulation, the diluents and superdisintegrants could play a key role in release profiles. Then, to fulfill the unmet needs of the two model drugs and match circadian rhythmic variations of hypertension and cholesterol synthesis, enteric-coated bilayer tablet consisting of TEL SD and PRA was finally prepared using Acryl-EZE^® as an enteric coating material. Prior to enteric coating, a seal coating layer (Opadry^®, 2% weight gains) was firstly introduced to separate the core bilayer tablet from the acidic enteric coating polymers to avoid premature degradation. Dissolution profiles of finished tablets revealed that enteric-coated bilayer tablets with 6% weight gains remained intact in acidic media (pH 1.0) for 2h and then released drugs completely within 45min after switching to the intestinal media (pH 6.8). It was observed that enteric-coated bilayer tablets were stable during 3 month under the accelerated condition of 40°C/75% RH. The delayed drug release and bedtime dosage regimen using enteric-coated bilayer tablet containing TEL and PRA, matching the circadian rhythms of hypertension and hyperlipidemia can provide therapeutic benefits for elderly patients in terms of maximizing the therapeutic effects.

Preparation and Evaluation of Hot-Melt Extruded Patient-Centric Ketoprofen Mini-Tablets

BACKGROUND

Bitter tasting drugs represent a large portion of active pharmaceutical ingredients. Mini-tablets are specifically designed for patients with difficulty in swallowing particular in young children up to 10 years of age, geriatric patients and patients with esophagitis.

OBJECTIVE

The present study was aimed to prepare, taste-masked mini-tablets, which are easily swallowed dosage forms, primarily to be used by pediatric and geriatric patients.

METHODS

Ketoprofen (10%-50% w/w) and Eudragit® EPO were blended and extruded with a 5-mm strand die and cut into consistent mini-tablets by using an adapted downstream pelletizer.

RESULTS

Differential scanning calorimetry and polarized light microscopy-hot stage microscopy studies confirmed that the binary mixtures were miscible under the employed extrusion temperatures. In-vitro release studies showed that drug release was less than 0.5% within the first 2 min in simulated salivary fluid (pH 6.8) and more than 90% in the first 20 min in gastric media (pH 1.0). The results of the electronic tongue analysis were well correlated with the drug release profile of the mini-tablets in the artificial saliva. Scanning electron microscopy revealed no cracks on the surface of the minitablets, confirming that the mini-tablets were compact solids. Chemical imaging confirmed the uniform distribution of ketoprofen inside the polymer matrices.

CONCLUSION

Eudragit® EPO containing ketoprofen at various drug loads were successfully melt extruded into tastedmasked mini-tablets. The reduced drug release at salivary pH correlated well with Astree e-Tongue studies for taste masking efficiency.

Anakinra Protects Against Serum Deprivation-Induced Inflammation and Functional Derangement in Islets Isolated From Nonhuman Primates

We investigated whether serum deprivation induces islet amyloid polypeptide (IAPP) oligomer accumulation and/or a proinflammatory response and, if so, whether the addition of interleukin (IL)-1 receptor antagonist to the culture medium can relieve the proinflammatory response during serum-deprived culture of nonhuman primate (NHP) islets. After culture in medium with and without Ana under serum-deprived culture conditions, IAPP oligomer/amyloid accumulation, in vitro viability, islet function, cytokine secretion, and posttransplantation outcome in streptozotocin-induced diabetic nude mice were determined in islets isolated from heterozygote human IAPP transgenic (hIAPP^+/- ) mice and/or NHP islets. Serum deprivation induced accumulation of IAPP oligomer, but not amyloid, in NHP islets. Anakinra (Ana) protected islets from the serum deprivation-induced impairment of in vitro viability and glucose-stimulated insulin secretion and attenuated serum deprivation-induced caspase-1 activation, transcription, and secretion of IL-1β, IL-6, and tumor necrosis factor-α in hIAPP^+/- mice and NHP islets. Supplementation of medium with Ana during serum-deprived culture also improved posttransplantation in vivo outcomes of NHP islets. In conclusion, serum deprivation induced accumulation of IAPP oligomers and proinflammatory responses in cultured isolated islets. Supplementation of the culture medium with Ana attenuated the functional impairment and proinflammatory responses induced by serum deprivation in ex vivo culture of NHP islets.

Process Analytical Quality Control of Tailored Drug Release Formulation Prepared via Hot-Melt Extrusion Technology

The objective of the present study was to compare the influence of Eudragit^® RS PO and RL PO blends on the release of water-soluble and insoluble drugs from hot-melt extruded formulations. In addition, we aimed to evaluate drug content uniformity and distribution by Fourier transform-infrared (FT-IR) chemical imaging. Theophylline (TP) and carbamazepine (CBZ) were selected as the water-soluble and insoluble model drugs, respectively. Eudragit^® RS PO and RL PO were selected as the polymeric matrices. FT-IR chemical imaging clearly demonstrated the content uniformity and distribution for both drugs in the extrudates, which was confirmed by HPLC. Increasing the ratio of Eudragit^® RL PO led to an increase in the in vitro drug release, whereas an increase in the ratio of Eudragit^® RS PO sustained the drug release for up to 12 h. The hot-melt extrusion of TP and CBZ with varying ratios of Eudragit^® RS PO and RL PO can be employed to tailor the drug release profiles. In this study, we demonstrated, for the first time, the use of FT-IR chemical imaging as a process analytical technique to determine the drug content uniformity and distribution. Our data correlated well with the results of HPLC analysis in the study of tailored drug release from the prepared hot-melt extruded formulation.

Health-Related Quality of Life of Kidney Transplantation Patients: Results from the KoreaN Cohort Study for Outcome in Patients With Kidney Transplantation (KNOW-KT) Study

BACKGROUND

As patient and graft survival rates have been improving after kidney transplantation, health-related quality of life (HR-QOL) has become an important indicator of effective treatment. This study aimed to evaluate changes in HR-QOL after kidney transplantation.

MATERIALS AND METHODS

The KoreaN cohort study for Outcome in patients With Kidney Transplantation (KNOW-KT) is a multicenter, observational, 9-year, cohort study. The HR-QOL of patients in the KNOW-KT study was assessed before transplantation and 2 years after transplantation using the Kidney Disease Quality of Life Short Form (KDQOL-SF) including chronic kidney disease targeted area and the Medical Outcome Study 36-item Short Form Health Survey (SF-36). Multivariate linear regression was used to identify significant factors associated with follow-up QOL scores.

RESULTS

A total of 175 patients from 8 centers were analyzed. All QOL scores including the total QOL score, chronic kidney disease targeted score, and SF-36 at the 2-year follow-up were significantly increased compared to baseline values. Both physical and mental scale scores were improved after transplantation.

CONCLUSION

The QOL scores for both the mental and physical scales were improved at 2 years after kidney transplantation. High glomerular filtration rate at 2 years, high baseline QOL score, and low body mass index were associated with good follow-up QOL scores. Kidney transplantation for an Asian population with end-stage renal disease can result in better QOL as well as better patient and graft survival.

Short-Term Outcomes of ABO-Incompatible Living Donor Kidney Transplantation With Uniform Protocol: Significance of Baseline Anti-ABO Titer

Antibody-mediated rejection (AMR) is one of the major causes of poor outcomes in ABO-incompatible kidney transplantation (ABOi KT). Studies investigating AMR risk factors found that anti-ABO titer is a major issue. However, the significance of antibody titer has been debated. This retrospective study analyzed AMR risk factors in 59 patients who underwent ABOi KT between August 2010 and January 2015. We also analyzed AMR risk factors in recipients with high anti-ABO baseline titers (≥1:64 on dithiothreitol at 37°C phase or ≥1:256 on antihuman globulin phase). The 2-year patient survival rate was 95.8%, and the 2-year graft survival rate was 94.9%. Nine patients (15.3%) experienced clinical (6 of 59 [10.2%]) or subclinical (3 of 59 [5.1%]) AMR. One patient experienced graft loss from hyperacute rejection. AMR risk factor analysis revealed that baseline antibody titer was associated with incidence of AMR. In patients with high baseline titers, low doses of rituximab (200-mg single-dose), an antibody against CD20, was predictive for AMR. Six patients who received pretransplant intravenous immunoglobulin did not experience AMR even when they had high baseline antibody titers. Our results indicate that a high baseline antibody titer affected the incidence of AMR. ABOi KT candidates with high baseline titers need to undergo an intensified preconditioning protocol, including high-dose rituximab (375 mg/m(2)) and intravenous immunoglobulin.

Preparation and evaluation of enteric coated tablets of hot-melt extruded lansoprazole

The objective of this work was to use hot-melt extrusion (HME) technology to improve the physiochemical properties of lansoprazole (LNS) to prepare stable enteric coated LNS tablets. For the extrusion process, we chose Kollidon^® 12 PF (K12) polymeric matrix. Lutrol^® F 68 was selected as the plasticizer and magnesium oxide (MgO) as the alkalizer. With or without the alkalizer, LNS at 10% drug load was extruded with K12 and F68. LNS changed to the amorphous phase and showed better release compared to that of the pure crystalline drug. Inclusion of MgO improved LNS extrudability and release and resulted in over 80% drug release in the buffer stage. Hot-melt extruded LNS was physically and chemically stable after 12 months of storage. Both formulations were studied for compatibility with Eudragit^® L100-55. The optimized formulation was compressed into a tablet followed by coating process utilizing a pan coater using L100-55 as an enteric coating polymer. In a two-step dissolution study, the release profile of the enteric coated LNS tablets in the acidic stage was less than 10% of the LNS, while that in the buffer stage was more than 80%. Drug content analysis revealed the LNS content to be 97%, indicating the chemical stability of the enteric coated tablet after storage for six months. HME, which has not been previously used for LNS, is a valuable technique to reduce processing time in the manufacture of enteric coated formulations of an acid-sensitive active pharmaceutical ingredient as compared to the existing methods.

Investigation of the combined effect of MgO and PEG on the release profile of mefenamic acid prepared via hot-melt extrusion techniques

This study aimed to investigate the combined effect of magnesium oxide (MgO) as an alkalizer and polyethylene glycol (PEG) as a plasticizer and wetting agent in the presence of Kollidon® 12 PF and 17 PF polymer carriers on the release profile of mefenamic acid (MA), which was prepared via hot-melt extrusion technique. Various drug loads of MA and various ratios of the polymers, PEG 3350 and MgO were blended using a V-shell blender and extruded using a twin-screw extruder (16-mm Prism EuroLab, ThermoFisher Scientific, Carlsbad, CA) at different screw speeds and temperatures to prepare a solid dispersion system. Differential scanning calorimetry and X-ray diffraction data of the extruded material confirmed that the drug existed in the amorphous form, as evidenced by the absence of corresponding peaks. MgO and PEG altered the micro-environmental pH to be more alkaline (pH 9) and increased the hydrophilicity and dispersibility of the extrudates to enhance MA solubility and release, respectively. The in vitro release study demonstrated an immediate release for 2 h with more than 80% drug release within 45 min in matrices containing MgO and PEG in combination with polyvinylpyrrolidone when compared to the binary mixture, physical mixture and pure drug.