A critical perspective on the scope of interdisciplinary approaches used in fourth-generation biofuel production

Environmental impact assessment of a novel third-generation biorefinery approach for astaxanthin and biofuel production

A novel third-generation biorefinery approach, including two paths of Ethanol/methane production pathway (EMP) and the direct methane production pathway (DMP), for astaxanthin and ethanol and biogas production from the freshwater microalgae Haematococcus pluvialis was developed previously. To ensure its environmental sustainability, a comprehensive life cycle assessment (LCA) study was conducted based on 1-GJ energy generation from biomethane as the functional unit. Results indicate that the EMP pathway had higher environmental impacts on all categories due to more stages and chemicals/energy consumption (at least five times greater effect). Results showed that while the enzymatic hydrolysis step followed by the fermentation stage was the main contributor to all environmental categories in the EMP route, astaxanthin induction dominated all environmental categories in the DMP route. The results showed that sodium nitrate, phosphate salts, inoculum sludge, acetone, and electricity had considerable environmental impacts. Moreover, despite low enzyme usage in enzymatic hydrolysis, these proteins significantly impacted all environmental categories in this stage. The baseline analysis concluded that to produce 1 GJ energy from methane, about 88 kg and 13 kg CO2 were generated from the EMP and DMP pathways, respectively. A sensitivity analysis was also conducted to compare various ratios of chemicals, such as phosphate salts, with high contributions to enzymatic hydrolysis and astaxanthin induction stages in the EMP and DMP routes, respectively. Finally, the LCA results revealed that the DMP pathway is more environmentally friendly with the same economic value of biomethane and astaxanthin production. This LCA study updated the data related to the environmental assessment of processes to utilize H. pluvialis to produce biofuels and astaxanthin simultaneously.

Exploitation of lignocellulosic-based biomass biorefinery: A critical review of renewable bioresource, sustainability and economic views

Urbanization has driven the demand for fossil fuels, however, the overly exploited resource has caused severe damage on environmental pollution. Biorefining using abundant lignocellulosic biomass is an emerging strategy to replace traditional fossil fuels. Value-added lignin biomass reduces the waste pollution in the environment and provides a green path of conversion to obtain renewable resources. The technology is designed to produce biofuels, biomaterials and value-added products from lignocellulosic biomass. In the biorefinery process, the pretreatment step is required to reduce the recalcitrant structure of lignocellulose biomass and improve the enzymatic digestion. There is still a gap in the full and deep understanding of the biorefinery process including the pretreatment process, thus it is necessary to provide optimized and adapted biorefinery solutions to cope with the conversion process in different biorefineries to further provide efficiency in industrial applications. Current research progress on value-added applications of lignocellulosic biomass still stagnates at the biofuel phase, and there is a lack of comprehensive discussion of emerging potential applications. This review article explores the advantages, disadvantages and properties of pretreatment methods including physical, chemical, physico-chemical and biological pretreatment methods. Value-added bioproducts produced from lignocellulosic biomass were comprehensively evaluated in terms of encompassing biochemical products , cosmetics, pharmaceuticals, potent functional materials from cellulose and lignin, waste management alternatives, multifunctional carbon materials and eco-friendly products. This review article critically identifies research-related to sustainability of lignocellulosic biomass to promote the development of green chemistry and to facilitate the refinement of high-value, environmentally-friendly materials. In addition, to align commercialized practice of lignocellulosic biomass application towards the 21st century, this paper provides a comprehensive analysis of lignocellulosic biomass biorefining and the utilization of biorefinery green technologies is further analyzed as being considered sustainable, including having potential benefits in terms of environmental, economic and social impacts. This facilitates sustainability options for biorefinery processes by providing policy makers with intuitive evaluation and guidance.

Novel Corrugated Long Period Grating Surface Balloon-Shaped Heterocore-Structured Plastic Optical Fibre Sensor for Microalgal Bioethanol Production

A novel long period grating (LPG) inscribed balloon-shaped heterocore-structured plastic optical fibre (POF) sensor is described and experimentally demonstrated for real-time measurement of the ultra-low concentrations of ethanol in microalgal bioethanol production applications. The heterocore structure is established by coupling a 250 μm core diameter POF between two 1000 μm diameter POFs, thus representing a large core-small core-large core configuration. Before coupling as a heterocore structure, the sensing region or small core fibre (SCF; i.e., 250 μm POF) is modified by polishing, LPG inscription, and macro bending into a balloon shape to enhance the sensitivity of the sensor. The sensor was characterized for ethanol-water solutions in the ethanol concentration ranges of 20 to 80 %v/v, 1 to 10 %v/v, 0.1 to 1 %v/v, and 0.00633 to 0.0633 %v/v demonstrating a maximum sensitivity of 3 × 10⁶ %/RIU, a resolution of 7.9 × 10^-6 RIU, and a limit of detection (LOD) of 9.7 × 10^-6 RIU. The experimental results are included for the intended application of bioethanol production using microalgae. The characterization was performed in the ultra-low-level ethanol concentration range, i.e., 0.00633 to 0.03165 %v/v, that is present in real culturing and production conditions, e.g., ethanol-producing blue-green microalgae mixtures. The sensor demonstrated a maximum sensitivity of 210,632.8 %T/%v/v (or 5 × 10⁶ %/RIU as referenced from the RI values of ethanol-water solutions), resolution of 2 × 10^-4%v/v (or 9.4 × 10^-6 RIU), and LOD of 4.9 × 10^-4%v/v (or 2.3 × 10^-5 RIU). Additionally, the response and recovery times of the sensor were investigated in the case of measurement in the air and the ethanol-microalgae mixtures. The experimentally verified, extremely high sensitivity and resolution and very low LOD corresponding to the initial rate of bioethanol production using microalgae of this sensor design, combined with ease of fabrication, low cost, and wide measurement range, makes it a promising candidate to be incorporated into the bioethanol production industry as a real-time sensing solution as well as in other ethanol sensing and/or RI sensing applications.

Biofuels from Renewable Sources, a Potential Option for Biodiesel Production

Ever-increasing population growth that demands more energy produces tremendous pressure on natural energy reserves such as coal and petroleum, causing their depletion. Climate prediction models predict that drought events will be more intense during the 21st century affecting agricultural productivity. The renewable energy needs in the global energy supply must stabilize surface temperature rise to 1.5 °C compared to pre-industrial values. To address the global climate issue and higher energy demand without depleting fossil reserves, growing bioenergy feedstock as the potential resource for biodiesel production could be a viable alternative. The interest in growing biofuels for biodiesel production has increased due to its potential benefits over fossil fuels and the flexibility of feedstocks. Therefore, this review article focuses on different biofuels and biomass resources for biodiesel production, their properties, procedure, factors affecting biodiesel production, different catalysts used, and greenhouse gas emissions from biodiesel production.

Fourth generation biofuel from genetically modified algal biomass for bioeconomic development

Biofuels from microalgae have promising potential for a sustainable bioeconomy. Algal strains' oil content and biomass yield are the most influential cost drivers in the fourth generation biofuel (FGB) production. Genetic modification is the key to improving oil accumulation and biomass yield, consequently developing the bioeconomy. This paper discusses current practices, new insights, and emerging trends in genetic modification and their bioeconomic impact on FGB production. It was demonstrated that enhancing the oil and biomass yield could significantly improve the probability of economic success and the net present value of the FGB production process. The techno-economic and socioeconomic burden of using genetically modified (GM) strains and the preventive control strategies on the bioeconomy of FGB production is reviewed. It is shown that the fully lined open raceway pond could cost up to 25% more than unlined ponds. The cost of a plastic hoop air-supported greenhouse covering cultivation ponds is estimated to be US 60,000$ /ha. The competitiveness and profitability of large-scale cultivation of GM biomass are significantly locked to techno-economic and socioeconomic drivers. Nonetheless, it necessitates further research and careful long-term follow-up studies to understand the mechanism that affects these parameters the most.

A review on unit operations, challenges, opportunities, and strategies to improve algal based biodiesel and biorefinery

Globally, the demand for energy is increasing with an emphasis on green fuels for a sustainable future. As the urge for alternative fuels is accelerating, microalgae have emerged as a promising source that can not only produce high lipid but many other platform chemicals. Moreover, it is a better alternative in comparison to conventional feedstock due to yearlong easy and mass cultivation, carbon fixation, and value-added products extraction. To date, numerous studies have been done to elucidate these organisms for large-scale fuel production. However, enhancing the lipid synthesis rate and reducing the production cost still remain a major bottleneck for its economic viability. Therefore, this study compiles information on algae-based biodiesel production with an emphasis on its unit operations from strain selection to biofuel production. Additionally, strategies to enhance lipid accumulation by incorporating genetic, and metabolic engineering and the use of leftover biomass for harnessing bio-products have been discussed. Besides, implementing a biorefinery for extracting oil followed by utilizing leftover biomass to generate value-added products such as nanoparticles, biofertilizers, biochar, and biopharmaceuticals has also been discussed.

A review on global perspectives of sustainable development in bioenergy generation

Over the last few decades, the globe has much relied on fossil fuels; however, environmental concerns forced the World to look at biofuel as an alternative for stable economic development. Biofuel also facilitates national energy security maintenance and reduces environmental complications. The present study is focused on an in-depth analysis of bioenergy policy measures undertaken by various federal agencies of different countries in order to shed light on the bottlenecks that impede biofuel's growth as a sustainable and alternative fuel. An in-depth assessment of feedstock utilization, blending targets, and policy assistance schemes have been thoroughly reviewed. In addition, the potential of commercial firms for the production of bioenergy is highlighted in order to grasp the current bioenergy market scenario better. Finally, the article is concluded with the viewpoints of the authors to address the standing issues of global bioenergy generation.