Kinetics and thermodynamics of methylene blue adsorption on the Fe-oxide nanoparticles embedded in the mesoporous SiO2

A greener one-pot synthesis of nanostructured SiO2 for the efficient emerging contaminant removal from simulated textile wastewater

Emerging contaminants are a group of chemicals that have the potential to enter the environment and cause potentially adverse effects on the ecosystems and their components. Currently, the interest in achieving the removal of emerging contaminants from water bodies and wastewater has grown considerably, which is reflected in several publications on the synthesis of nanomaterials capable of adsorbing them. Among emerging pollutants, methylene blue (MB) is a widely used model dye for the study of adsorption processes on nanomaterials. In this work, we report a facile and greener one-pot synthesis of SiO2 nanoparticles (SiO2NPs) than the classical Stöber method, involving a cheaper Si source than TEOS, only water as solvent, and shorter reaction times under neutral conditions at room temperature, i.e. a new sol-gel strategy with favorable greenness attributes. A multi-technical characterization of SiO2NPs (XRD, FTIR, UV-vis DR, TEM, SEM, EDX, Z-potential, and N2 adsorption-desorption isotherms at 77 K) confirmed the formation of spherical NPs, with amorphous and polydisperse nature, negatively charged surface, and mesoporous structure. Several batch adsorption experiments of MB were performed by varying pH, contact time, model dye concentration, and SiO2NPs dosage, and the kinetic and thermodynamic behavior of the removal reaction was elucidated. It was determined that the adsorption process followed a pseudo-second-order kinetic model and a Langmuir isotherm model. SiO2NPs showed high efficiency towards MB removal after 30 min of contact time (maximum adsorption capacity = 165.6 mg g-1) and high reusability for up to seven cycles without appreciable loss of adsorption efficiency. In addition, this work reports the first successful application of SiO2NPs as a cationic dye nanoadsorbent under simulated conditions of real textile wastewater (high pH, very high concentration of MB and dissolved salts, and high COD), proving that NPs are suitable for conditioning water resources contaminated with industrial dyes.

Photo-transformation of biochar-derived dissolved organic matter and its binding with phenanthrene/9-phenanthrol: The role of functional group and pyrolysis temperature

This study explores the physicochemical attributes of dissolved organic matter from rice straw biochar (BDOM) at varying pyrolysis temperatures and photo-irradiation conditions, focusing on the binding mechanisms of phenanthrene (PHE) and 9-phenanthrol (PTR) using multiple spectroscopic techniques and fluorescence quenching. Following 20 h of photo-irradiation, only 11.3 % of BDOM underwent mineralization, forming new CH3/CH2/CH aliphatics structures. BDOM from biochar produced by pyrolysis at 400°C exhibited a stronger binding affinity with PHE and PTR, achieving 44 % and 52 % maximum binding, respectively. Static and dynamic quenching governed PHE and PTR binding, which was influenced by temperature. Photo-irradiated BDOM showed enhanced binding with PHE, attributed to increased aliphatic content. Hydrogen bond and π-π electron-donor-acceptor (EDA) interactions dominated PTR binding, while π-π interactions and hydrophobic interactions controlled PHE. This study provides valuable insights into BDOM photochemical behaviors and their impact on the environmental fate of polycyclic aromatic hydrocarbons (PAHs) after BDOM photo-irradiation.

Synergistic effect of adsorption and photolysis on methylene blue removal by magnetic biochar derived from lignocellulosic biomass

In this study, magnetic biochar was synthesized by doping Fe3O4 onto the biochar surface followed by analysis of its properties. The efficiency of methylene blue (MB) removal through the combined processes of adsorption and photolysis was assessed. The presence of Fe3O4 on the biochar surface was confirmed using Raman spectroscopy and X-ray photoelectron spectroscopy. The magnetic biochar, after MB adsorption, showed a magnetism of 39.50 emu/g leading to a 97.07 % recovery rate. The specific surface area of biochar was higher (380.68 m2/g) than that of magnetic biochar (234.46 m2/g), and the maximum adsorption capacity of MB was higher in the biochar (0.03 mg/g) than that in magnetic biochar (0.02 mg/g) under the optimal conditions for MB adsorption. The MB adsorption experiments using biochar or magnetic biochar were optimally conducted under 10-20 mg/L MB concentration, 1 g biochar dosage, pH 12, 200 rpm rotation speed, 25 °C temperature, and 30 min duration. Under dark conditions, biochar had a higher MB removal rate, at 83.91 %, compared to magnetic biochar, at 78.30 %. Under visible light (λ > 425 nm), magnetic biochar effectively removed MB within 10 min, highlighting the synergistic effect of adsorption and photolysis. MB is physically and chemically adsorbed by the monolayer on the surface of EB and EMB according to adsorption behavior.

Development and Upscaling of SiO2@TiO2 Core-Shell Nanoparticles for Methylene Blue Removal

SiO2@TiO2 core-shell nanoparticles were successfully synthesized via a simple, reproducible, and low-cost method and tested for methylene blue adsorption and UV photodegradation, with a view to their application in wastewater treatment. The monodisperse SiO2 core was obtained by the classical Stöber method and then coated with a thin layer of TiO2, followed by calcination or hydrothermal treatments. The properties of SiO2@TiO2 core-shell NPs resulted from the synergy between the photocatalytic properties of TiO2 and the adsorptive properties of SiO2. The synthesized NPs were characterized using FT-IR spectroscopy, HR-TEM, FE-SEM, and EDS. Zeta potential, specific surface area, and porosity were also determined. The results show that the synthesized SiO2@TiO2 NPs that are hydrothermally treated have similar behaviors and properties regardless of the hydrothermal treatment type and synthesis scale and better performance compared to the SiO2@TiO2 calcined and TiO2 reference samples. The generation of reactive species was determined by EPR, and the photocatalytic activity was evaluated by the methylene blue (MB) removal in aqueous solution under UV light. Hydrothermally treated SiO2@TiO2 showed the highest adsorption capacity and photocatalytic removal of almost 100% of MB after 15 min in UV light, 55 and 89% higher compared to SiO2 and TiO2 reference samples, respectively, while the SiO2@TiO2 calcined sample showed 80%. It was also observed that the SiO2-containing samples showed a considerable adsorption capacity compared to the TiO2 reference sample, which improved the MB removal. These results demonstrate the efficient synergy effect between SiO2 and TiO2, which enhances both the adsorption and photocatalytic properties of the nanomaterial. A possible photocatalytic mechanism was also proposed. Also noteworthy is that the performance of the upscaled HT1 sample was similar to one of the lab-scale synthesized samples, demonstrating the potentiality of this synthesis methodology in producing candidate nanomaterials for the removal of contaminants from wastewater.

Adsorption-enhanced catalytic oxidation for long-lasting dynamic degradation of organic dyes by porous manganese-based biopolymeric catalyst

Improving the adsorption kinetics of metal-oxide catalysts is critical for the enhancement of catalytic performance in heterogeneous catalytic oxidation reactions. Herein, based on the biopolymer pomelo peels (PP) and metal-oxide catalyst manganese oxide (MnO_x), an adsorption-enhanced catalyst (MnO_x-PP) was constructed for catalytic organic dyes oxidative-degradation. MnO_x-PP shows excellent methylene blue (MB) and total carbon content (TOC) removal efficiency of 99.5 % and 66.31 % respectively, and keeps the long-lasting stable dynamic degradation efficiency during 72 h based on the self-built continuous single-pass MB purification device. The chemical structure similarity and negative-charge polarity sites of the biopolymer PP improve the adsorption kinetics of organic macromolecule MB, and construct the adsorption-enhanced catalytic oxidation microenvironment. Meanwhile, the adsorption-enhanced catalyst MnO_x-PP obtains lower ionization potential and O₂ adsorption energy to promote the continuous generation of active substance (O₂*, OH*) for the further catalytic oxidation of adsorbed MB molecules. This work explored the adsorption-enhanced catalytic oxidation mechanism for the degradation of organic pollutants, and provided a feasible technical idea for designing adsorption-enhanced catalysts for the long-lasting efficient removal of organic dyes.

Solution NMR methods for structural and thermodynamic investigation of nanoparticle adsorption equilibria

Characterization of dynamic processes occurring at the nanoparticle (NP) surface is crucial for developing new and more efficient NP catalysts and materials. Thus, a vast amount of research has been dedicated to developing techniques to characterize sorption equilibria. Over recent years, solution NMR spectroscopy has emerged as a preferred tool for investigating ligand-NP interactions. Indeed, due to its ability to probe exchange dynamics over a wide range of timescales with atomic resolution, solution NMR can provide structural, kinetic, and thermodynamic information on sorption equilibria involving multiple adsorbed species and intermediate states. In this contribution, we review solution NMR methods for characterizing ligand-NP interactions, and provide examples of practical applications using these methods as standalone techniques. In addition, we illustrate how the integrated analysis of several NMR datasets was employed to elucidate the role played by support-substrate interactions in mediating the phenol hydrogenation reaction catalyzed by ceria-supported Pd nanoparticles.

Synthesis and characterizations of hybrid PEG-Fe3O4 nanoparticles for the efficient adsorptive removal of dye and antibacterial, and antibiofilm applications

PURPOSE

Dyes are highly toxic coloured compounds in nature that are largely applied in paper, food, textile and printing industries. Here, the adsorption technique was performed to remove methyl orange (MO) dye from water by polyethylene glycol (PEG) modified iron oxide nanoparticles (Fe₃O₄ NPs).

METHODS

The method used for Fe₃O₄ NPs synthesis was chemical precipitation. The particles were analyzed by transmission electron microscope, magnetometer, BET analyzer, fourier-transform infrared spectroscopy, X-ray powder diffraction, zetasizer and particle size analyzer. The influence of pH (4.0 to 10.0), NaCl concentration (0.01 mM to 2 M), adsorbent dosage (1 to 10 mg), and the role of surface charge on adsorptive removal were investigated.

RESULTS

The NPs size, zeta potential and surface area was found to be 26 ± 1.26 nm, 33.12 ± 1.01 mV and 119 m²/g respectively. The adsorption of MO on Fe₃O₄ NPs agreed best to Freundlich model (R² = 0.965) when compared with Langmuir model (R² = 0.249). By comparing pseudo-first-order kinetic model (R² = 0.937), kinetic adsorption study was better followed by pseudo-second-order kinetic model (R² = 1). The adsorption rate decreased with increasing NaCl concentration. At pH 4, maximum adsorption was noted. The particles were also exhibited excellent antibacterial and antibiofilm activities. The ROS formation, lipid peroxidation and oxidative stress were increased with increase in NPs concentration. The NPs precoated slides exhibited more than 50% growth inhibition.

CONCLUSION

The investigation denotes the versatile applications of the prepared particles for removing the dye stuffs from industrial effluents and as antibacterial and antibiofilm agent.

Ultrasonic-assisted synthesis of SiO2 nanoparticles and SiO2/chitosan/Fe nanocomposite and their application for vanadium adsorption from aqueous solution

The husk of brown rice, as a source of silica, was applied to synthesize natural SiO₂ nanoparticles via sonochemical method. SiO₂/CH/Fe nanocomposite was synthesized from SiO₂, chitosan (prepared from shrimp shells via sonochemical method), and iron functional groups and detected using BET, EDX-SEM, and FTIR techniques. These natural-based nanostructures (SiO₂ and SiO₂/CH/Fe) have been applied for vanadium adsorption. The influences of initial pH, initial concentration, and adsorption time were studied via a batch process. The analysis of the kinetics data indicated that the chemical adsorption is predominant. The analysis of the equilibrium data indicated the single layer and exothermic adsorption process. The mono-layer adsorption capacity of SiO₂/CH/Fe was 199.540 mg g^-1. The performance of SiO₂/CH/Fe in a continuous column system was investigated in four adsorption and desorption cycles. Results showed that SiO₂/CH/Fe nanocomposite synthesized with the sonochemical method is a candidate with high adsorption ability for use as an industrial adsorbent.