Functionalization of mesoporous MCM-41 for the delivery of curcumin as an anti-inflammatory therapy

Enhanced cancer therapy using modified magnetic α-Fe2O3/Fe3O4nanorods: Dual role in curcumin delivery and ferroptosis induction

Curcumin (CUR) has gained considerable attention in oncology due to its potent anti-tumor, anti-inflammatory, and antioxidant properties. However, its clinical utility was significantly hindered by low bioavailability and rapid metabolic degradation. This work designed a magnetic α-Fe2O3/Fe3O4 heterogeneous nanorod prepared via a urea hydrolysis-calcination process for curcumin delivery. The nanorods were modified with hyaluronic acid (HA), providing a stable matrix for curcumin encapsulation. The zeta potential of α-Fe2O3/Fe3O4/HA/CUR was -3.94 mV, the saturation magnetization was 7.82 emu·g-1, the encapsulation rate and drug loading rate were 10.53 % and 29.64 % respectively. At pH 5.4, 6.5, and 7.4, the release rates were 44.8 %, 40.2 %, and 39.3 %, respectively. Kinetic modeling indicated that release profiles followed the Weibull kinetic model, with an R2 value greater than 0.98. The α-Fe2O3/Fe3O4/HA/CUR exhibited excellent magnetic responsiveness, demonstrating a significant inhibitory effect on human liver cancer (HepG2) cells (inhibition rate greater than 60 %) under a magnetic field. Moreover, they substantially reduced the cytotoxicity of curcumin on normal human (LO2) cells. The α-Fe2O3/Fe3O4/HA/CUR inhibited migration and proliferation of HepG2 cells, induced apoptosis via the Caspase pathway, and synergistically suppressed tumor cell development through ferroptosis. The drug release from the α-Fe2O3/Fe3O4/HA/CUR was stable, significantly enhancing the bioavailability of curcumin. This provided a promising strategy for improving the bioavailability of poorly soluble drugs and enhancing liver cancer treatment outcomes.

Development of Novel Piperine-Loaded Mesoporous Silica Nanoparticles: Enhanced Drug Delivery and Comprehensive In Vivo Safety Analysis

Piperine-loaded mesoporous silica nanoparticles (MSNPs) were synthesized by chemical methods from tetraethylorthosilicate (TEOS) as a precursor, N-cetyl trimethyl ammonium bromide (CTAB) as a surfactant, piperine, distilled water, and sodium hydroxide (NaOH) as a catalyst at 80°C. After stirring the mixture for 20-30 min, the synthesized combined substances were washed with ethanol and the surfactant was removed using hydrochloric acid (HCl). The morphological characterization was assessed by high-resolution-transmission electron microscope (HR-TEM), scanning electron microscopy (field emission [FE]-scanning electron microscopy [SEM]), FE-SEM-energy-dispersive x-ray (EDX), infrared Fourier transform infrared spectroscopic (FTIR), x-ray diffractometer (XRD), dynamic light scattering (DLS), and ultraviolet-visible (UV-VIS). HR-TEM final report showed the amorphous nature of the prepared nanoparticles (NPs). TEM image at 100 nm showed typical ball-like geometry with an average particle size of 13.05 nm. FE-SEM analysis proved that MSNPs loaded with piperine have a spherical shape with various nm ranges starting from 232 to 552 nm. The results of the piperine release test observed 93.70% of the drug (piperine) over 24 h. The in vivo toxicity analysis of piperine-loaded MSNPs tested using adult zebrafish showed no toxic effect. Our developed piperine-loaded MSNPs are favorable for achieving sustained release, a lower dose frequency, and better therapeutic effects.

As(V) adsorption by FeOOH@coal gangue composite from aqueous solution: performance and mechanisms

Arsenic (As) pollution in water poses a significant threat to the ecological environment and human health. Meanwhile, the resource utilisation of coal gangue is of utmost importance in ecologically sustainable development. Thus, the FeOOH@coal gangue composite (FeOOH@CG) was synthesised for As(V) adsorption in this study. The results showed that α-FeOOH, β-FeOOH and Schwertmannite loaded on the surface of FeOOH@CG. Moreover, the adsorption behaviour of As(V) by FeOOH@CG was investigated under different reaction conditions, such as pH, contact time, initial concentration and co-existing anions. The optimum adsorption conditions were as follows: initial As(V) concentration of 60 mg/L, pH of 3.0 and adsorption time of 180-240 h. The adsorption capacity of FeOOH@CG for As(V) was pH-dependent and the maximum adsorption capacity was 185.94 mg/g. The presence of anions (H 2 PO 4 - , HCO 3 - and C l - ) decreased the adsorption efficiency of FeOOH@CG for As(V). The adsorption process of FeOOH@CG for As(V) could be well-described by the pseudo-second-order model and Langmuir model, indicating that the adsorption process mainly depended on chemical adsorption. The thermodynamic analysis suggested that the adsorption was a spontaneous and endothermic process. In addition, according to the analyses of XRD, FTIR and XPS, the dominant mechanisms of As(V) adsorption by FeOOH@CG were electrostatic attraction, complexation and precipitation. In conclusion, FeOOH@CG has great potential as an efficient and environmentally friendly adsorbent for As(V) adsorption from aqueous solution.

Theranostics Using MCM-41-Based Mesoporous Silica Nanoparticles: Integrating Magnetic Resonance Imaging and Novel Chemotherapy for Breast Cancer Treatment

Advanced breast cancer remains a significant oncological challenge, requiring new approaches to improve clinical outcomes. This study investigated an innovative theranostic agent using the MCM-41-NH2-DTPA-Gd3⁺-MIH nanomaterial, which combined MRI imaging for detection and a novel chemotherapy agent (MIH 2.4Bl) for treatment. The nanomaterial was based on the mesoporous silica type, MCM-41, and was optimized for drug delivery via functionalization with amine groups and conjugation with DTPA and complexation with Gd3+. MRI sensitivity was enhanced by using gadolinium-based contrast agents, which are crucial in identifying early neoplastic lesions. MIH 2.4Bl, with its unique mesoionic structure, allows effective interactions with biomolecules that facilitate its intracellular antitumoral activity. Physicochemical characterization confirmed the nanomaterial synthesis and effective drug incorporation, with 15% of MIH 2.4Bl being adsorbed. Drug release assays indicated that approximately 50% was released within 8 h. MRI phantom studies demonstrated the superior imaging capability of the nanomaterial, with a relaxivity significantly higher than that of the commercial agent Magnevist. In vitro cellular cytotoxicity assays, the effectiveness of the nanomaterial in killing MDA-MB-231 breast cancer cells was demonstrated at an EC50 concentration of 12.6 mg/mL compared to an EC50 concentration of 68.9 mg/mL in normal human mammary epithelial cells (HMECs). In vivo, MRI evaluation in a 4T1 syngeneic mouse model confirmed its efficacy as a contrast agent. This study highlighted the theranostic capabilities of MCM-41-NH2-DTPA-Gd3⁺-MIH and its potential to enhance breast cancer management.

Unravelling pH/pKa influence on pH-responsive drug carriers: Insights from ibuprofen-silica interactions and comparative analysis with carbon nanotubes, sulfasalazine, and alendronate

This study employs density functional theory to explore the interaction between ibuprofen (IBU) and silica, emphasizing the influence of the trimethylsilyl (TMS) functional group for designing pH-responsive drug carriers. The surface (S) and drug (D) molecules' neutral (0) or deprotonated (-1) states were taken into consideration during the investigation. The likelihood of these states was determined based on the pKa values and the desired pH conditions. To calculate the pH-dependent interaction energy (EintpH), four different situations have been identified: S0D0, S0D-1, S-1D0, and S-1D-1.The electrostatic component of interaction energy aligns favorably with its theoretical value in both the Debye-Hückel and Grahame models. The investigation has gathered first-hand experimental data on the drug loading and release of pH-responsive mesoporous silica nanoparticles. Effective drug loading was observed in the acidic environment of the stomach (pH 2-5), followed by a release in the slightly basic to neutral pH of the small intestine (pH 7.4), These findings align with existing literature. The results revealed horizontal drug adherence on silica surfaces, improving binding capabilities. Comparisons were made with combinations involving carboxylated carbon nanotubes and ibuprofen, silica, and sulfasalazine, and silica and alendronate, exploring drug loading/release dynamics associated with positive/negative interaction energies. The investigation, supported by experimental data, contributes valuable insights into pH-responsive mesoporous silica nanoparticles, offering new design possibilities for drug carriers.

Synergistic chemo-photothermal therapy using gold nanorods supported on thiol-functionalized mesoporous silica for lung cancer treatment

Cancer therapy necessitates the development of novel and effective treatment modalities to combat the complexity of this disease. In this project, we propose a synergistic approach by combining chemo-photothermal treatment using gold nanorods (AuNRs) supported on thiol-functionalized mesoporous silica, offering a promising solution for enhanced lung cancer therapy. To begin, mesoporous MCM-41 was synthesized using a surfactant-templated sol-gel method, chosen for its desirable porous structure, excellent biocompatibility, and non-toxic properties. Further, thiol-functionalized MCM-41 was achieved through a simple grafting process, enabling the subsequent synthesis of AuNRs supported on thiol-functionalized MCM-41 (AuNR@S-MCM-41) via a gold-thiol interaction. The nanocomposite was then loaded with the anticancer drug doxorubicin (DOX), resulting in AuNR@S-MCM-41-DOX. Remarkably, the nanocomposite exhibited pH/NIR dual-responsive drug release behaviors, facilitating targeted drug delivery. In addition, it demonstrated exceptional biocompatibility and efficient internalization into A549 lung cancer cells. Notably, the combined photothermal-chemo therapy by AuNR@S-MCM-41-DOX exhibited superior efficacy in killing cancer cells compared to single chemo- or photothermal therapies. This study showcases the potential of the AuNR@S-MCM-41-DOX nanocomposite as a promising candidate for combined chemo-photothermal therapy in lung cancer treatment. The innovative integration of gold nanorods, thiol-functionalized mesoporous silica, and pH/NIR dual-responsive drug release provides a comprehensive and effective therapeutic approach for improved outcomes in lung cancer therapy. Future advancements based on this strategy hold promise for addressing the challenges posed by cancer and transforming patient care.

The alginate dialdehyde crosslinking on curcumin-loaded zein nanofibers for controllable release

In this study, electrospun zein/alginate dialdehyde (AD) nanofibers were prepared by green crosslinking. The degree of crosslinking could reach 50.72 %, and the diameter of electrospun fibers ranged from 446.2 to 541.8 nm. The generation of AD and the bonding of crosslinking were further confirmed by the changes on characteristic peaks and conformational ratios in the infrared spectroscopy and secondary structure analysis. High concentrations of AD led to improved thermal stabilities, mechanical properties, and hydrophobicity. And the highly crosslinked nanofibers (Z-8) owned the highest elastic modulus (24.92 MPa), tensile strength (0.28 MPa), and elongation at break (8.14 %) among five samples. Moreover, Z-8 possessed a high swelling ratio of 5.45 g/g, and a low weight loss of 6.09 %. The samples could encapsulate curcumin efficiently and show controllable release behaviors based on different AD addition. And the oxidation resistance of nanofibers gradually improved, consistent with the release performances. This study indicated AD crosslinking favored the preparation and application of zein nanofibers, and the oxidized polysaccharide acted as the green crosslinking agent, which provided reference value for the application of polysaccharides in food-related electrospun materials.

Theoretical insights and implications of pH-dependent drug delivery systems using silica and carbon nanotube

In this paper we have studied the density functional theory of four drugs ibuprofen, alendronate, Sulfasalazine and paracetamol with quartz, propylamine, trimethylamine functionalized quartz and carboxyl modified carbon nanotube. The attractive and repulsive interaction energies between drugs and quartz is obtained at various pH values. The attractive and repulsive energies are well correlated with experimental drug loading and releasing behavior by mesoporous silica nanoparticles. Further, a theoretical model is developed that accounts the electrostatic interaction between silica and drug and the model can predict the drug loading and releasing behavior by silica nanoparticles at various pH values. Sulfasalazine can be taken orally and loaded with trimethyl ammonium functionalized mesoporous silica nanoparticles, which keeps the drug in tact with the carrier in the acidic environment of the stomach and releases it into the neutral or basic medium of the small intestine. Alendronate may be loaded and released from propylamine functionalized mesoporous silica nanoparticles in the ranges of 1-5 and > 8, respectively. Ibuprofen is absorbed in an acidic environment and released in basic conditions for carboxyl modified carbon nanotube. The loading and releasing pH ranges for paracetamol in trimethylammonium functionalized mesoporous silica nanoparticles are 4-8 and >8, respectively. We also convert the pH-dependent variant of the diffusion-controlled Higuchi equation. We have changed the original Higuchi equation to produce the pH-dependent variation by incorporating the Nernst-Planck equation into Flick's first law. The updated equation could be used to forecast when medication particles with varying release times will emerge from a nanoparticles matrix.

Green synthesis and characterization of silicate nanostructures coated with Pluronic F127/gelatin for triggered drug delivery in tumor microenvironments

Thermo-/pH-sensitive nanocomposites based on mesoporous silicate MCM-41 (MSNCs) derived from rice husk ash were synthesized and characterized. MSNCs were coated with thermo-/pH-sensitive Pluronic® F127 and gelatin to form MSNCs@gp nanocomposites, serving as carriers for controlled release of the anticancer drug doxorubicin (Dox). The in vitro and in vivo antitumor efficacy of MSNCs@gp-Dox against liver cancer was evaluated. Fourier-transform infrared (FTIR) spectra confirmed the silica nature of MSNCs@gp by detecting the Si-O-Si group. Under acidic microenvironments (pH 5.4) and 42 °C, MSNCs@gp-Dox exhibited significantly higher Dox release (47.33 %) compared to physiological conditions. Thermo-/pH-sensitive drug release (47.33 %) was observed in simulated tumor environments. The Makoid-Banakar model provided the best fit at pH 7.4 and 37 °C with a mean squared error of 0.4352, an Akaike Information Criterion of 15.00, and a regression coefficient of 0.9972. Cytotoxicity tests have demonstrated no significant toxicity in HepG2 cells treated with various concentrations of MSNCs@gp, while MSNCs@gp-Dox induced considerable cell apoptosis. In vivo studies in nude mice revealed effective suppression of liver cancer growth by MSNCs@gp-Dox, indicating high pharmaceutical efficacy. The investigated MSNCs@gp-based drug delivery system shows promise for liver cancer therapy, offering enhanced treatment efficiency with minimal side effects.

Porous Microgels for Delivery of Curcumin: Microfluidics-Based Fabrication and Cytotoxicity Evaluation

Polymeric microgels, fabricated via microfluidic techniques, have garnered significant interest as versatile drug delivery carriers. Despite the advances, the loading and release of hydrophobic drugs such as curcumin from polymeric microgels is not trivial. Herein, we report that effective drug loading can be achieved by the design of porous particles and the use of supramolecular cyclodextrin-based curcumin complexes. The fabrication of porous microgels through the judicious choice of chemical precursors under flow conditions was established. The evaluation of the curcumin loading dependence on the porosity of the microgels was performed. Microgels with higher porosity exhibited better curcumin loading compared to those with lower porosity. Curcumin-loaded microgels released the drug, which, upon internalization by U87 MG human glioma cancer cells, induced cytotoxicity. The findings reported here provide valuable insights for the development of tailored drug delivery systems using a microfluidics-based platform and outline a strategy for the effective delivery of hydrophobic therapeutic agents such as curcumin through supramolecular complexation.

Fast and reliable analysis of pH-responsive nanocarriers for drug delivery using microfluidic tools

During the last decades, there has been growing interest in the application of functionalized mesoporous nanomaterials as stimuli-responsive carriers for drug delivery. However, at present there is not a standardized methodology to evaluate their performance. The limitations of the different techniques reported in literature give rise to the necessity for new, simple, and cost-effective alternatives. This work constitutes a step forward in the development of advanced in vitro procedures for testing the behavior of nanocarriers, proposing a novel microfluidic platform. To test the capacity of the reported tool, the performance of amino-functionalized MCM-41 nanoparticles has been assessed. These materials show a pH-responsive mechanism, which prevents the drug release at acidic conditions, maximizing its distribution at neutral pH, thus, the selected release medium mimicked gastrointestinal conditions. As a first approximation, the delivery of Ru(bipy)32+ was evaluated, proving the advantages of the proposed microfluidic system: i) continuous flow of particles and media, ii) rigorous control of the residence time, temperature and pH, iii) enhanced mixing, iv) possibility to simulate different human body conditions and, v) possible integration with the continuous synthesis of nanocarriers. Finally, the microfluidic tool was used to analyze the delivery of the anti-inflammatory drug ibuprofen.

Curcumin-loaded mesoporous silica nanoparticles for drug delivery: synthesis, biological assays and therapeutic potential - a review

Curcumin-loaded mesoporous silica nanoparticles (MSNs) have shown promise as drug delivery systems to address the limited pharmacokinetic characteristics of curcumin. Functionalization with folic acid and PEGylation enhance anticancer activity, biocompatibility, stability, and permeability. Co-delivery with other drugs results in synergistically enhanced cytotoxic activity. Environment-responsive MSNs prevent undesirable drug leakage and increase selectivity towards target tissues. This review summarizes the methods of Cur-loaded MSN synthesis and functionalization and their application in various diseases, and also highlights the potential of Cur-loaded MSNs as a promising drug delivery system.

Evaluation of the effectiveness of amendments derived from vermicompost combined with modified shell powder on Cd immobilization in Cd-contaminated soil by multiscale experiments

The widespread heavy metal contamination of agricultural soils poses an enormous challenge to food safety. To evaluate the Cd immobilization potential of vermicompost combined with modified shell powder (VMSP) on Cd-contaminated soil, batch adsorption tests and field experiments were conducted. First, the Cd²⁺ removal characteristics and adsorption mechanisms of vermicompost (V), vermicompost combined with shell powder (VSP), and VMSP in an aqueous solution were investigated by batch tests. Then, 3 kg·m² V, VSP, and VMSP doses were applied to Cd-contaminated farmland soils as soil amendments to plant green garlic (Allium sativum L.) and investigate their Cd immobilization effects in Cd-contaminated soils. Batch adsorption tests showed that VMSP was most effective for Cd²⁺ removal, with adsorption rates as high as 85.7-99.79% and desorption rates of approximately 1.25-1.34%. Combining further characterization analysis of VMSP, it was demonstrated that the adsorption mechanism of Cd²⁺ was monolayer chemisorption, mainly involving the complexation reaction of Cd²⁺ with organic functional groups and the precipitation reaction of Cd²⁺ with mineral elements. The field experiment showed that adding V, VSP, and VMSP effectively inhibited the enrichment of Cd in green garlic, and the Cd content was reduced by 42.18%, 46.88%, and 68.75%, respectively. However, only the Cd content of green garlic treated with VMSP was lower than the national standard for food safety in China (Cd≤ 0.2 mg·kg^-1). V, VSP, and VMSP additions improved soil fertility and reduced Cd bioavailability in the soil by 15.5%, 18.9%, and 36.3%, respectively. In addition, V, VSP, and VMSP addition increased bacterial diversity and improved bacterial communities and functions in the soil by improving basic soil properties and reducing Cd-related toxicity. The results indicated that VMSP is a promising amendment for Cd immobilization in Cd-contaminated farmland soils.

Applying MCM-48 mesoporous material, equilibrium, isotherm, and mechanism for the effective adsorption of 4-nitroaniline from wastewater

In this work, the MCM-48 mesoporous material was prepared and characterized to apply it as an active adsorbent for the adsorption of 4-nitroaniline (4-Nitrobenzenamine) from wastewater. The MCM-48 characterizations were specified by implementing various techniques such as; scanning electron microscopy (SEM), Energy dispersive X-ray analysis (EDAX), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area, pore size distribution (PSD), and Fourier transform infrared (FTIR). The batch adsorption results showed that the MCM-48 was very active for the 4-nitroaniline adsorption from wastewater. The adsorption equilibrium results were analyzed by applying isotherms like Langmuir, Freundlich, and Temkin. The maximum experimental uptake according to type I Langmuir adsorption was found to be 90 mg g^-1 approximately. The Langmuir model with determination coefficient R² = 0.9965 is superior than the Freundlich model R² = 0.99628 and Temkin model R² = 0.9834. The kinetic adsorption was investigated according to pseudo 1st order, pseudo 2nd order, and Intraparticle diffusion model. The kinetic results demonstrated that the regression coefficients are so high R² = 0.9949, that mean the pseudo 2nd order hypothesis for the adsorption mechanism process appears to be well-supported. The findings of adsorption isotherms and kinetics studies indicate the adsorption mechanism is a chemisorption and physical adsorption process.

TARTESSUS: A Customized Electrospun Drug Delivery System Loaded with Irinotecan for Local and Sustained Chemotherapy Release in Pancreatic Cancer

Post-surgical chemotherapy in pancreatic cancer has notorious side effects due to the high dose required. Multiple devices have been designed to tackle this aspect and achieve a delayed drug release. This study aimed to explore the controlled and sustained local delivery of a reduced drug dose from an irinotecan-loaded electrospun nanofiber membrane (named TARTESSUS) that can be placed on the patients' tissue after tumor resection surgery. The drug delivery system formulation was made of polycaprolactone (PCL). The mechanical properties and the release kinetics of the drug were adjusted by the electrospinning parameters and by the polymer ratio between 10 w.t.% and 14 w.t.% of PCL in formic acid:acetic acid:chloroform (47.5:47.5:5). The irinotecan release analysis was performed and three different release periods were obtained, depending on the concentration of the polymer in the dissolution. The TARTESSUS device was tested in 2D and 3D cell cultures and it demonstrated a decrease in cell viability in 2D culture between 72 h and day 7 from the start of treatment. In 3D culture, a decrease in viability was seen between 72 h, day 7 (p < 0.001), day 10 (p < 0.001), 14 (p < 0.001), and day 17 (p = 0.003) as well as a decrease in proliferation between 72 h and day 10 (p = 0.030) and a reduction in spheroid size during days 10 (p = 0.001), 14 (p < 0.001), and 17 (p < 0.001). In conclusion, TARTESSUS showed a successful encapsulation of a chemotherapeutic drug and a sustained and delayed release with an adjustable releasing period to optimize the therapeutic effect in pancreatic cancer treatment.

Hydrophobic Mesoporous Silica-Coated Solid-Phase Microextraction Arrow System for the Determination of Six Biogenic Amines in Pork and Fish

In this study, a functionalized mesoporous silica-coated solid-phase microextraction (SPME) Arrow system was developed for the enrichment of six biogenic amines (BAs) from pork and fish samples before gas chromatographic separation with a mass spectrometer as a detector. MCM-41 was utilized as the substrate material and thereby functionalized by titanate and sodium dodecyl sulfate to adjust its surface acidity and hydrophobicity, respectively. The functionalized MCM-41 (named as MCM-T-H) was coated on a bare SPME Arrow using the dipping method and polyacrylonitrile was used as the adhesive. The extraction capacity and selectivity of the MCM-T-H-SPME Arrow for six kinds of derivatized BAs were studied and compared with commercial SPME Arrows. Experimental parameters, e.g., sample volume, derivatization reagent amount, extraction time, and desorption time, which have a dramatic effect on SPME Arrow pretreatment, were optimized. Acidity enhanced MCM-T-H coating showed a much higher affinity to derivatized BAs compared to a commercial SPME Arrow in terms of extraction capacity. In addition, hydrophobicity modification significantly reduced the interference of water molecules on the interaction between MCM-T-H and the derivatized BAs. The MCM-T-H-SPME Arrow showed efficient separation and enrichment capacity for derivatized BAs from complex matrices and therefore, the sample pretreatment time was saved. According to the experimental results, the optimal condition was to add 10 μL derivatization reagent to a 10 mL sample and maintain an agitation speed of 1250 r min^-1. The MCM-T-H-SPME showed excellent reproducibility (RSD < 9.8%) and fast adsorption kinetics (30 min) and desorption kinetics (5 min) for derivatized BAs under optimal conditions. In summary, the MCM-T-H-SPME Arrow based method was employed for accurate monitoring of the variations of BAs in pork and fish, and good results were achieved.

Quercetin-Loaded Mesoporous Silica Nanoparticle-Based Lyophilized Tablets for Enhanced Physicochemical Features and Dissolution Rate: Formulation, Optimization, and In Vitro Evaluation

Mesoporous silica nanoparticles (MSNPs) have been proposed as a potential approach for stabilizing the amorphous state of poorly water-soluble actives. This study aimed to improve the physiochemical characteristics of poorly water-soluble quercetin (QT) through a novel lyophilized formulation. Various parameters, including solvent polarity, QT-carrier mass ratio, and adsorption time, were studied to improve the loading of QT into MSNPs. The optimized loaded MSNPs were formulated into lyophilized tablets through a freeze-drying process using hydrophilic polyvinylpyrrolidone (PVP-K30) as a polymeric stabilizer and water-soluble sucrose as a cryoprotectant. The effect of PVP-K30 and sucrose on the particle size, disintegration time, friability, and time required to release 90% of QT were studied using 3² full factorial design. The optimized formula was characterized using different evaluating techniques; for instance, differential scanning calorimetry, X-ray diffractometry, Fourier transform infrared spectroscopy, drug content, moisture content, and saturation solubility. The analysis proved that QT was consistently kept in the nanosize range with a narrow size distribution. The loaded silica nanoparticles and the optimized formulation are in an amorphous state devoid of any chemical interaction with the silica matrix or the lyophilization excipients. The optimized formula also featured low friability (less than 1%), fast disintegration (< 30 s), and a pronounced enhancement in saturation solubility and dissolution rate. Briefly, we established that the lyophilized MSNPs-based tablet would be a potential strategy for improving the rate of dissolution and, ultimately, the bioavailability of the poorly water-soluble QT.

Lyophilization of Curcumin-Albumin Nanoplex with Sucrose as Cryoprotectant: Aqueous Reconstitution, Dissolution, Kinetic Solubility, and Physicochemical Stability

An amorphous curcumin (CUR) and bovine serum albumin (BSA) nanoparticle complex (nanoplex) was previously developed as a promising anticancer nanotherapy. The CUR-BSA nanoplex had been characterized in its aqueous suspension form. The present work developed a dry-powder form of the CUR-BSA nanoplex by lyophilization using sucrose as a cryoprotectant. The cryoprotective activity of sucrose was examined at sucrose mass fractions of 33.33, 50.00, and 66.66% by evaluating the lyophilized nanoplex's (1) aqueous reconstitution and (2) CUR dissolution and kinetic solubility. The physicochemical stabilizing effects of sucrose upon the nanoplex's 30-day exposures to 40 °C and 75% relative humidity were examined from (i) aqueous reconstitution, (ii) CUR dissolution, (iii) CUR and BSA payloads, (iv) amorphous form stability, and (v) BSA's structural integrity. The good cryoprotective activity of sucrose was evidenced by the preserved BSA's integrity and good aqueous reconstitution, resulting in a fast CUR dissolution rate and a high kinetic solubility (≈5-9× thermodynamic solubility), similar to the nanoplex suspension. While the aqueous reconstitution, CUR dissolution, and amorphous form were minimally affected by the elevated heat and humidity exposures, the treated nanoplex exhibited a lower BSA payload (≈7-26% loss) and increased protein aggregation postexposure. The adverse effects on the BSA payload and aggregation were minimized at higher sucrose mass fractions.

Study on the Adsorption Performance and Adsorption Mechanism of Graphene Oxide by Red Sandstone in Aqueous Solution

In order to deal with the increasingly serious pollution of graphene oxide (GO) to the environment. In this paper, the use of red sandstone to treat GO-contaminated aqueous solution is proposed for the first time, and the adsorption capacity and adsorption mechanism of red sandstone to GO are discussed. The controlled variable method was used to explore the optimal pH, concentration, and quality of red sandstone for GO aqueous solution. The adsorption isotherm, thermodynamics, and adsorption kinetics were fitted. Adsorption characterization tests were performed using XRD, AFM, XPS, FT-IR, SAP, TEM, SAP, laser particle size analyzer, and SEM. The results show that when $T=303\text{K}$ , the optimum adsorption condition of red sandstone for GO is $\text{pH}=4$ , the mass of the adsorbent is 40 mg, and when the concentration of GO is 80 mg/L, the adsorption capacity is 90 mg/g. The adsorption isotherm model fits the Langmuir model. The adsorption thermodynamic experiments and fitting results show that the reaction is endothermic. XRD and FT-IR tests showed that CaCO3 in red sandstone was involved in the adsorption of GO. SEM, TEM, and AFM microscopic results showed that GO was adsorbed on the surface of red sandstone particles. The XPS test showed that Ca2+ in red sandstone and C=O bond in GO undergo ionic or coordination reaction. The adsorption kinetics fit a pseudo-second-order kinetic model. This study will provide some references for the removal of GO in the environment and the interaction mechanism with natural minerals.

Mesoporous Materials as Elements of Modern Drug Delivery Systems for Anti-Inflammatory Agents: A Review of Recent Achievements

Interest in the use of mesoporous materials as carriers of medicinal substances has been steadily increasing in the last two decades. Mesoporous carriers have application in the preparation of delivery systems for drugs from various therapeutic groups; however, their use as the carriers of anti-inflammatory agents is particularly marked. This review article, with about 170 references, summarizes the achievements in the application of mesoporous materials as the carriers of anti-inflammatory agents in recent years. This article will discuss a variety of mesoporous carriers as well as the characteristics of their porous structure that determine further use of these materials in the field of medical applications. Special attention will be paid to the progress observed in the construction of stimuli-responsive drug carriers and systems providing site-specific drug delivery. Subsequently, a review of the literature devoted to the use of mesoporous matrices as the carriers of anti-inflammatory drugs was carried out.

Degradation of methylene blue through Fenton-like reaction catalyzed by MoS2-doped sodium alginate/Fe hydrogel

In this study, a low-cost and high-performance MoS2/sodium alginate (SA)/Fe (MSF) hydrogel catalyst was prepared. It was found that the MSF hydrogel could efficiently catalyze the degradation of methylene blue (MB) through the Fenton reaction without the addition of Fe2+. The reaction was initiated by Fe2+ which was derived from the cyclic redox reaction between MoS2 and Fe3+ and produced large quantities of ·OH to degrade the MB. The effect of MoS2 concentration, FeCl3·6H2O concentration, H2O2 dosage, solution pH, and light on the degradation was systematically studied. The MoS2 concentration of 0.5 mg/ mL, FeCl3·6H2O concentration of 0.25 g/mL, 50 μL H2O2, and the pH of 4.0 were the optimized parameters. Moreover, it was found that the MB degraded faster under the infrared radiation. The MB removal rate reached as high as 98% within 15 min in the presence of a low concentration of H2O2 and the procedure could be repeated 5 times. The MSF hydrogel provided an effective and simple strategy for the sustainable degradation of organic pollutants in wastewater.