Unravelling pH/pKa influence on pH-responsive drug carriers: Insights from ibuprofen-silica interactions and comparative analysis with carbon nanotubes, sulfasalazine, and alendronate

This study employs density functional theory to explore the interaction between ibuprofen (IBU) and silica, emphasizing the influence of the trimethylsilyl (TMS) functional group for designing pH-responsive drug carriers. The surface (S) and drug (D) molecules' neutral (0) or deprotonated (-1) states were taken into consideration during the investigation. The likelihood of these states was determined based on the pKa values and the desired pH conditions. To calculate the pH-dependent interaction energy (EintpH), four different situations have been identified: S0D0, S0D-1, S-1D0, and S-1D-1.The electrostatic component of interaction energy aligns favorably with its theoretical value in both the Debye-Hückel and Grahame models. The investigation has gathered first-hand experimental data on the drug loading and release of pH-responsive mesoporous silica nanoparticles. Effective drug loading was observed in the acidic environment of the stomach (pH 2-5), followed by a release in the slightly basic to neutral pH of the small intestine (pH 7.4), These findings align with existing literature. The results revealed horizontal drug adherence on silica surfaces, improving binding capabilities. Comparisons were made with combinations involving carboxylated carbon nanotubes and ibuprofen, silica, and sulfasalazine, and silica and alendronate, exploring drug loading/release dynamics associated with positive/negative interaction energies. The investigation, supported by experimental data, contributes valuable insights into pH-responsive mesoporous silica nanoparticles, offering new design possibilities for drug carriers.

Graphitized mango seed as an effective 3D anode in batch and continuous mode microbial fuel cells for sustainable wastewater treatment and power generation

Herein, we explored the utilization of graphitized mango seeds as 3D-packed anodes in microbial fuel cells (MFCs) powered by sewage wastewater. Mango seeds were graphitized at different temperatures (800 °C, 900 °C, 1000 °C, and 1100 °C) and their effectiveness as anodes was evaluated. Surface morphology analysis indicated that the proposed anode was characterized by layered branches and micro-sized deep holes, facilitating enhanced biofilm formation and microorganism attachment. Maximum power densities achieved in the MFCs utilizing the mango seed-packed anodes graphitized at 1100 °C and 1000 °C were 2170.8 ± 90 and 1350.6 ± 125 mW m-2, respectively. Furthermore, the weight of the graphitized seed anode demonstrated a positive correlation with the generated power density and cell potential. Specifically, MFCs fabricated with 9 g and 6 g anodes achieved maximum power densities of 2170.8 ± 90 and 1800.5 ± 40 mW m-2, respectively. A continuous mode air cathode MFC employing the proposed graphitized mango anode prepared at 1100 °C and operated at a flow rate of 2 L h-1 generated a stable current density of approximately 12 A m-2 after 15 hours of operation, maintaining its stability for 75 hours. Furthermore, a chemical oxygen demand (COD) removal efficiency of 85% was achieved in an assembled continuous mode MFC. Considering that the proposed MFC was driven by sewage wastewater without the addition of external microorganisms, atmospheric oxygen was used as the electron acceptor through an air cathode mode, agricultural biomass waste was employed for the preparation of the anode, and a higher power density was achieved (2170.8 mW m-2) compared to reported values; it is evident that the proposed graphitized mango seed anode exhibits high efficiency for application in MFCs.

Nanoengineered, Pd-doped Co@C nanoparticles as an effective electrocatalyst for OER in alkaline seawater electrolysis

Water electrolysis is considered one of the major sources of green hydrogen as the fuel of the future. However, due to limited freshwater resources, more interest has been geared toward seawater electrolysis for hydrogen production. The development of effective and selective electrocatalysts from earth-abundant elements for oxygen evolution reaction (OER) as the bottleneck for seawater electrolysis is highly desirable. This work introduces novel Pd-doped Co nanoparticles encapsulated in graphite carbon shell electrode (Pd-doped CoNPs@C shell) as a highly active OER electrocatalyst towards alkaline seawater oxidation, which outperforms the state-of-the-art catalyst, RuO2. Significantly, Pd-doped CoNPs@C shell electrode exhibiting low OER overpotential of ≈213, ≈372, and ≈ 429 mV at 10, 50, and 100 mA/cm2, respectively together with a small Tafel slope of ≈ 120 mV/dec than pure Co@C and Pd@C electrode in alkaline seawater media. The high catalytic activity at the aforementioned current density reveals decent selectivity, thus obviating the evolution of chloride reaction (CER), i.e., ∼490 mV, as competitive to the OER. Results indicated that Pd-doped Co nanoparticles encapsulated in graphite carbon shell (Pd-doped CoNPs@C electrode) could be a very promising candidate for seawater electrolysis.

Stearic Acid and CeO2 Nanoparticles Co-functionalized Cotton Fabric with Enhanced UV-Block, Self-Cleaning, Water-Repellent, and Antibacterial Properties

Superhydrophobic cotton fabrics with multifunctional features are highly desired in domestic and outdoor applications. However, the short coating longevity and hazardous reagents significantly reduce their commercial-scale applications. Herein, we introduce CeO2 nanoparticles and stearic acid (SA) to develop a fluorine-free, durable superhydrophobic cotton fabric that mimics the lotus effect. The pristine cotton fabric is treated with APTES-functionalized CeO2 nanoparticles by immersion followed by a dip and drying treatment with a 2% myristic acid solution. This sequential process creates a stable superhydrophobic cotton fabric (SA/CeO2-cotton fabric) with a water contact angle of 158° and a water sliding angle of 5°. The results are attributed to the combined effect of CeO2 nanoparticles and stearic acid that enhances surface roughness and reduces surface sorption energy. APTES facilitates the durable attachment of CeO2 nanoparticles and stearic acid to the cotton fabric. The modified cotton fabric is characterized by advanced analytical tools, demonstrating enhanced superhydrophobicity, self-cleaning, and antiwater absorption properties. Additionally, it exhibits remarkable UV-blocking (UPF 542) and antibacterial properties. The designed superhydrophobic cotton fabric unveils good mechanical, thermal, and chemical durability. The proposed strategy is simple, green, and economical and can be used commercially for functional fabric preparation.

Solution Combustion Synthesis of Novel S,B-Codoped CoFe Oxyhydroxides for the Oxygen Evolution Reaction in Saline Water

Green hydrogen presents itself as a clean energy vector, which can be produced by electrolysis of water by utilizing renewable energy such as solar or wind. While current technologies are sufficient to support commercial deployment of fresh water electrolyzers, there remain a few well-defined challenges in the path of commercializing direct seawater electrolyzers, predominantly related to the sluggish oxygen evolution reaction (OER) kinetics and the competing chlorine evolution reaction (CER) at the anode. Herein, we report the facile and swift fabrication of an S,B-codoped CoFe oxyhydroxide via solution combustion synthesis for the OER with apparent CER suppression abilities. The as-prepared S,B-(CoFe)OOH-H attained ultralow overpotentials of 161 and 278 mV for achieving current densities of 10 and 1000 mA cm^-2, respectively, in an alkaline saline (1 M KOH + 0.5 M NaCl) electrolyte, with a low Tafel slope of 46.7 mV dec^-1. Chronoamperometry testing of the codoped bimetallic oxyhydroxides showed very stable behavior in harsh alkaline saline and in neutral pH saline environments. S,B-(CoFe)OOH-H oxyhydroxide showed a notable decrease in CER production in comparison to the other S,B-codoped counterparts. Selectivity measurements through online FE calculations showed high OER selectivity in alkaline (FE ∼ 97%) and neutral (FE ∼ 91%) pH saline conditions under standard 10 mA cm^-2 operation. Moreover, systematic testing in electrolytes at pH values of 14 to 7 yielded promising results, thus bringing direct seawater electrolysis at near-neutral pH conditions closer to realization.

Early Transition-Metal-Based Binary Oxide/Nitride for Efficient Electrocatalytic Hydrogen Evolution from Saline Water in Different pH Environments

Using abundant seawater can reduce reliance on freshwater resources for hydrogen production from electrocatalytic water splitting. However, seawater has detrimental effects on the stability and activity of the hydrogen evolution reaction (HER) electrocatalysts under different pH conditions. In this work, we report the synthesis of binary metallic core-sheath nitride@oxynitride electrocatalysts [Ni(ETM)]^δ+-[O-N]^δ-, where ETM is an early transition metal V or Cr. Using NiVN on a nickel foam (NF) substrate, we demonstrate an HER overpotential as low as 32 mV at -10 mA cm^-2 in saline water (0.6 M NaCl). The results represent an advancement in saline water HER performance of earth-abundant electrocatalysts, especially under near-neutral pH range (i.e., pH 6-8). Doping ETMs in nickel oxynitrides accelerates the typically rate-determining H₂O dissociation step for HER and suppresses chloride deactivation of the catalyst in neutral-pH saline water. Heterointerface synergism occurs through H₂O adsorption and dissociation at interfacial oxide character, while adsorbed H* proceeds via Heyrovsky or Tafel step on the nitride character. This electrocatalyst showed stable performance under a constant current density of -50 mA cm^-2 for 50 h followed by additional 50 h at -100 mA cm^-2 in a neutral saline electrolyte (1 M PB + 0.6 M NaCl). Contrarily, under the same conditions, Pt/C@NF exhibited significantly low performance after a mere 4 h at -50 mA cm^-2. The low Tafel slope of 25 mV dec^-1 indicated that the reaction is Tafel limited, unlike commercial Pt/C, which is Heyrovsky limited. We close by discussing general principles concerning surface charge delocalization for the design of HER electrocatalysts in pH saline environments.

Surfactant/organic solvent free single-step engineering of hybrid graphene-Pt/TiO2 nanostructure: Efficient photocatalytic system for the treatment of wastewater coming from textile industries

In this study, hybrid graphene-Pt/TiO₂ nanostructure were synthesized by single-step, inexpensive and surfactant/organic solvent free route; hydrothermal technique. The physicochemical properties of hybrid graphene-Pt/TiO₂ nanostructure were carefully analyzed by multiple techniques, including X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The synthesized hybrid nanostructures were utilized as photocatalyst for the degradation of methylene blue (MB) dye under natural environment at average ambient temperature and mean daily global solar radiation, of about 22–25 °C and 374.9 mWh/cm², respectively. The activity performance indicated considerable degradation of methylene blue (MB) dye and was in the following order Gr (13%), TiO₂ (60%) and hybrid graphene-Pt/TiO₂ nanostructure (90%) over 21 min under the natural light illumination. The physiochemical characterization suggests that, the tightly attached metalized TiO₂ nanoparticles (Pt-TiO₂) on the high surface area graphene sheets improved utilization of visible light and increased separation and transfer of photo-excited electron (ē) hole (h⁺) pairs. Notably, the hybrid graphene-Pt/TiO₂ nanostructure exhibited an excellent cyclic stability for methylene blue (MB) dye removal. Finally, the kinetic behavior indicated that the photocatalytic degradation reaction of the dye obeyed the pseudo-first order (Langmuir-Hinshelwood) kinetics model.

Amorphous SiO2 NP-Incorporated Poly(vinylidene fluoride) Electrospun Nanofiber Membrane for High Flux Forward Osmosis Desalination

Novel amorphous silica nanoparticle-incorporated poly(vinylidine fluoride) electrospun nanofiber mats are introduced as effective membranes for forward osmosis desalination technology. The influence of the inorganic nanoparticle content on water flux and salt rejection was investigated by preparing electrospun membranes with 0, 0.5, 1, 2, and 5 wt % SiO2 nanoparticles. A laboratory-scale forward osmosis cell was utilized to validate the performance of the introduced membranes using fresh water as a feed and different brines as draw solution (0.5, 1, 1.5, and 2 M NaCl). The results indicated that the membrane embedding 0.5 wt % displays constant salt rejection of 99.7% and water flux of 83 L m(-2) h(-1) with 2 M NaCl draw solution. Moreover, this formulation displayed the lowest structural parameter (S = 29.7 μm), which represents approximately 69% reduction compared to the pristine membrane. Moreover, this study emphasizes the capability of the electrospinning process in synthesizing effective membranes as the observed water flux and average salt rejection of the pristine poly(vinylidine fluoride) membrane was 32 L m(-2) h(-1) (at 2 M NaCl draw solution) and 99%, respectively. On the other hand, increasing the inorganic nanoparticles to 5 wt % showed negative influence on the salt rejection as the observed salt flux was 1651 mol m(-2) h(-1). Besides the aforementioned distinct performance, studies of the mechanical properties, porosity, and wettability concluded that the introduced membranes are effective for forward osmosis desalination technology.

Facile synthesis of luminescent and amorphous La₂O₃-ZrO₂:Eu³⁺ nanofibrous membranes with robust softness

Novel luminescent and amorphous La2O3-ZrO2:Eu(3+) (LZE) nanofibrous membranes with robust softness are fabricated for the first time via a facile electrospinning technique. By incorporating zirconium oxide, the as-prepared lanthanum oxide nanofibrous membranes can be dramatically changed from extreme fragility to robust softness. Meanwhile, the softness and luminescent performance of LZE nanofibrous membranes can be finely controlled by regulating the doping concentration of zirconium oxide and europium in lanthanum oxide nanofibers. Additionally, the crystal structure analysis using X-ray diffractometer and high resolution transmission electron microscopy measurements have confirmed the correlation between the amorphous structure and softness. Furthermore, LZE membranes show the characteristic emission of Eu(3+) corresponding to (5)D(0, 1, 2)-(7)F(0, 1, 2, 3, 4) transitions due to an efficient energy transfer from O(2-) to Eu(3+). The LZE nanofibrous membranes with the optimum doping Eu(3+) concentration of 3 mol% exhibit excellent softness and luminescent properties, which make the materials to have potential applications in fluorescent lamps and field emission displays.