Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

Arsenate removal using chitosan-coated bentonite via fixed-bed system: a process integration by fuzzy optimization

Groundwater contamination is a global concern that has detrimental effect on public health and the environment. Sustainable groundwater treatment technologies such as adsorption require attaining a high removal efficiency at a minimal cost. This study investigated the adsorption of arsenate from groundwater utilizing chitosan-coated bentonite (CCB) under a fixed-bed column setup. Fuzzy multi-objective optimization was applied to identify the most favorable conditions for process variables, including volumetric flow rate, initial arsenate concentration, and CCB dosage. Empirical models were employed to examine how initial concentration, flow rate, and adsorbent dosage affect adsorption capacity at breakthrough, energy consumption, and total operational cost during optimization. The ε-constraint process was used in identifying the Pareto frontier, effectively illustrating the trade-off between adsorption capacity at breakthrough and the cost of the fixed-bed system. The integration of fuzzy optimization for adsorption capacity and its total operating cost utilized the global solver function in LINGO 20 software. A crucial equation derived from the Box-Behnken design and a cost equation based on energy and material usage in the fixed-bed system was employed. The results from identifying the Pareto front determined boundary limits for adsorption capacity at breakthrough (ranging from 12.96 ± 0.19 to 12.34 ± 0.42 μg/g) and total operating cost (ranging from 955.83 to 1106.32 USD/kg). An overall satisfaction level of 35.46% was achieved in the fuzzy optimization process. This results in a compromise solution of 12.90 μg/g for adsorption capacity at breakthrough and 1052.96 USD/kg for total operating cost. Henceforth, this can allow a suitable strategic decision-making approach for key stakeholders in future applications of the adsorption fixed-bed system.

Removal of bromophenol blue from polluted water using a novel azo-functionalized magnetic nano-adsorbent

Water pollution from organic dyes poses a serious danger to the environment. In the present work, we report a novel adsorbent (ADFS) based on azo-dye-functionalized superparamagnetic iron oxide nanoparticles (SPIONs) for the removal of the anionic dye bromophenol blue (BPB) from contaminated water. The fabricated SPIONs, azo dye, and ADFS adsorbent were characterized with FTIR and UV-vis absorption spectroscopy, 1HNMR spectroscopy, mass spectrometry, SEM imaging, dynamic light scattering (DLS), zeta potential measurements, vibrating sample magnetometry, thermogravimetric analysis, differential thermal analysis, and X-ray diffraction analysis. DLS measurements showed a particle size of 46.1 and 176.5 nm for the SPIONs and the ADFS, respectively. The adsorbent exhibited an adsorption capacity of 7.43 mg g-1 and followed the pseudo-second-order kinetics model (r2 = 0.9981). The ADFS could efficiently remove BPB from water after stirring for 120 minutes at room temperature and pH 2. The adsorption process was proved to occur via physisorption, as revealed by the Freundlich isotherm (n = 1.82 and KF = 11.5). Thermodynamic studies implied that the adsorption is spontaneous (-8.03 ≤ ΔG ≤ -0.58 kJ mol-1) and enthalpy-driven might take place via van der Waals interactions and/or hydrogen bonding (ΔH = -82.19 kJ mol-1 and ΔS = -0.24 kJ mol-1 K-1).

Characteristics of organic matter released from drinking water treatment sludge under different storage conditions: Evaluation based on activated carbon adsorbability

Recycling water from drinking water treatment sludge (DWTS) as raw water raises several problems in the drinking water supply. In this study, the impact of storage temperatures and oxygen conditions for DWTS on the characteristics of dissolved organic matter (DOM) released from sludge was evaluated in terms of adsorbability by activated carbon. Results showed that the adsorbability of the released DOM varied greatly with storage temperatures and oxygen conditions. The modified Freundlich isotherm model revealed that the average adsorption strength (KF) estimated based on dissolved organic carbon (DOC) and ultraviolet absorbance at 260 nm (UV260) varied in the ranges of 4.01-12.1 (mg g-1)1-1/n and 23.1-52.6 (L m-1 g-1)1-1/n, respectively. DOM released under the condition without aeration possessed higher adsorbability compared to DOM released under the condition with aeration (1.41-3.01 times for DOC-based; 1.14-2.28 times for UV260-based). Moreover, the KF values of fluorescence excitation-emission matrix (EEM)-based fulvic acid-like and humic acid-like substances were higher than those of tyrosine-like and tryptophan-like substances, indicating humic-like substances released from DWTS were more adsorbable than protein-like ones. The methods or adsorption conditions that can enhance the removal of protein-like substances are essential for dealing with water quality problems associated with recycling water from drinking water treatment sludge.

Utilization of electron beam irradiated carboxymethyl cellulose/polyvinyl alcohol/banana peels composite film for remediation of dyes from wastewater

In this work, polymeric composite films were fabricated utilizing stable, non-toxic, soluble, low-cost, good mechanical, and biocompatible polymers such as CMC and PVA with the waste of one of the most current fruits consumed worldwide banana peel waste (BP) as a filler. Sequences of carboxymethyl cellulose/polyvinyl alcohol/banana peel (CMC/PVA/BP) composite films with various amounts of BP utilizing eco-friendly technique (electron beam) (EB) irradiation were prepared to eliminate common hazardous organic pollutants such as methylene blue (MB) dye from its solutions. Physical characteristics like; swelling and gel % were examined. The chemical structure, thermal stability, and surface morphology were examined utilizing FT-IR, TGA, DSC, XRD, EDX, and SEM. Additionally, the UV/Vis spectroscopy study was investigated to study the impact of the various parameters such as irradiation, contact time, pH, temperature, adsorbent dosage, and initial concentration on removal efficiency % of MB dye onto the prepared composite films. The adsorption process fitted with the Langmuir model, pseudo-second-order kinetic model, endothermic, favorable, and spontaneous. The adsorption capacity of MB dye onto the CMC/PVA/BP composite film was 19.6 mg/g at the optimum conditions: irradiation dose = 20 kGy, contact time = 120 min, pH = 10, temperature = 25 °C, adsorbent dosage = 0.1 g and initial conc. = 10 mg/L.

Preparation and characterization of low-cost adsorbents for the efficient removal of malachite green using response surface modeling and reusability studies

Malachite green used in textile and dyeing industries is a common persistent pollutant in wastewater and the environment causing major hazards to human health and aquatic organisms. In this study, the response surface methodology was applied to optimize the adsorptive removal of malachite green using nano-bentonite, MgO-impregnated clay, and Mucor sp. composites. The nano materials and Mucor sp. composite were characterized by FTIR, SEM and X-ray diffractometry. According to the obtained results, nano-bentonite exhibits a maximum MG adsorption efficiency of 98.6% at 35 °C, pH 7.0, 60 min contact time, 1.0 g/L adsorbent dosage, and 50 mg/L initial MG concentration. On the other hand, the maximum efficiency for MG adsorption on MgO-impregnated clay of 97.04% is observed at pH 9.0, 60 min contact time, 0.7 g/L adsorbent dosage, and 50 mg/L initial MG concentration. The Malachite green (MG) adsorption isotherm on MgO-impregnated clay corresponded with the Freundlich isotherm, with a correlation coefficient (R²) of 0.982. However, the Langmuir adsorption isotherm was a superior fit for nano-bentonite (R² = 0.992). The adsorption activities of nano-bentonite and MgO-impregnated clay were fitted into a pseudo-second-order kinetic model with R² of 0.996 and 0.995, respectively. Additionally, despite being recycled numerous times, the adsorbent maintained its high structural stability and removal effectiveness for nano-bentonite (94.5-86%) and MgO-impregnated clay (92-83%).

Efficient adsorptive removal of paracetamol and thiazolyl blue from polluted water onto biosynthesized copper oxide nanoparticles

Copper oxide nanoparticles (CuONPs) have received tremendous attention as efficient adsorbents owing to their low cost, desirable surface area, abundant active sites, potent textural characteristics and high adsorption capacities. However, CuONPs have not been employed to decontaminate water laden with increasing environmental contaminants such as thiazolyl blue and paracetamol. Herein, the adsorption of thiazolyl blue and paracetamol onto green synthesized CuONPs prepared from the aqueous leaf extract of Platanus occidentalis was studied. The BET, SEM, FTIR, XRD, EDX and pH point of zero charge showed the successful synthesis of CuONPs having desirable surface properties with a surface area of 58.76 m²/g and an average size of 82.13 nm. The maximum monolayer adsorption capacities of 72.46 mg/g and 64.52 mg/g were obtained for thiazolyl blue and paracetamol, respectively. The Freundlich, pseudo-second-order and intraparticle diffusion models were well fitted to the adsorption of both pollutants. The pH studies suggested the predominance of electrostatic and weaker intermolecular interactions in the adsorption of the thiazolyl blue and paracetamol, respectively. Spontaneous, physical, endothermic and random adsorption of the pollutants on CuONPs was obtained from the thermodynamic consideration. The biosynthesized CuONPs were found to be highly reusable and efficient for the adsorption of thiazolyl blue and paracetamol from water.

Recent Advances in the Synthesis, Characterization, and Application of Carbon Nanomaterials for the Removal of Endocrine-Disrupting Chemicals: A Review

The large-scale production and frequent use of endocrine-disrupting chemicals (EDCs) have led to the continuous release and wide distribution of these pollutions in the natural environment. At low levels, EDC exposure may cause metabolic disorders, sexual development, and reproductive disorders in aquatic animals and humans. Adsorption treatment, particularly using nanocomposites, may represent a promising and sustainable method for EDC removal from wastewater. EDCs could be effectively removed from wastewater using various carbon-based nanomaterials, such as carbon nanofiber, carbon nanotubes, graphene, magnetic carbon nanomaterials, carbon membranes, carbon dots, carbon sponges, etc. Important applications of carbon nanocomposites for the removal of different kinds of EDCs and the theory of adsorption are discussed, as well as recent advances in carbon nanocomposite synthesis technology and characterization technology. Furthermore, the factors affecting the use of carbon nanocomposites and comparisons with other adsorbents for EDC removal are reviewed. This review is significant because it helps to promote the development of nanocomposites for the decontamination of wastewater.

Adsorption of pollutants in wastewater via biosorbents, nanoparticles and magnetic biosorbents: A review

Adsorption has gained much attention as one of the efficient approaches to remediate the contaminants in wastewater. Herein, this critical review focuses on the preparation, modification, application and regeneration of the biosorbents, nanoparticles and magnetic biosorbents for the wastewater treatment in recent 5 years (2017-2021). Among these materials, the development of magnetic biosorbents is attractive owing to their variable active sites, high specific surface area, easy separation and low cost. To improve the adsorption performance of biosorbents, the chemical activations such as acid, alkali and salt activations of biosorbents are discussed. In general, the oxidation reaction in acid, alkali and salt activations increases the porosity of biosorbents. The surface characteristics, surface chemistry of the biosorbents and magnetic biosorbents such as electrostatic interaction, π-π interaction and hydrogen bonding are highlighted. Ionic compounds are separated through ion exchange, surface charge and electrostatic interactions while the organic pollutants are removed via hydrophobicity, π-π interactions and hydrogen bonding. The effect of solution pH, adsorbent dosage, initial concentration of pollutants, adsorption duration and temperature on the adsorption capacity, and removal efficiency are discussed. Generally, an increase in adsorbent dosage resulted in a decrease in adsorption capacity due to the excessive active sites. On the other hand, a higher initial concentration or an increase in contact time of adsorbent increased the driving force, subsequently enhancing the adsorption capacity. Finally, this review will be concluded with a summary, challenges and future outlook of magnetic biosorbents. It is anticipated that this review will provide insights into engineering advanced and suitable materials to achieve cost-effective and scalable adsorbents for practical and sustainable environmental remediation.

Valorization of agro-industrial biowaste to green nanomaterials for wastewater treatment: Approaching green chemistry and circular economy principles

Water pollution is one of the most critical issues worldwide and is a priority in all scientific agendas. Green nanotechnology presents a plethora of promising avenues for wastewater treatment. This review discusses the current trends in the valorization of zero-cost, biodegradable, and readily available agro-industrial biowaste to produce green bio-nanocatalysts and bio-nanosorbents for wastewater treatment. The promising roles of green bio-nanocatalysts and bio-nanosorbents in removing organic and inorganic water contaminants are discussed. The potent antimicrobial activity of bio-derived nanodisinfectants against water-borne pathogenic microbes is reviewed. The bioactive molecules involved in the chelation and tailoring of green synthesized nanomaterials are highlighted along with the mechanisms involved. Furthermore, this review emphasizes how the valorization of agro-industrial biowaste to green nanomaterials for wastewater treatment adheres to the fundamental principles of green chemistry, circular economy, nexus thinking, and zero-waste manufacturing. The potential economic, environmental, and health impacts of valorizing agro-industrial biowaste to green nanomaterials are highlighted. The challenges and future outlooks for the management of agro-industrial biowaste and safe application of green nanomaterials for wastewater treatment are summarized.

Valorization of food waste as adsorbents for toxic dye removal from contaminated waters: A review

Industrial contaminants such as dyes and intermediates are released into water bodies, making the water unfit for human use. At the same time large amounts of food wastes accumulate near the work places, residential complexes etc. polluting the air due to putrefaction. The need of the hour lies in finding innovative solutions for dye removal from wastewater streams. In this context, the article emphasizes adoption or conversion of food waste materials, an ecological nuisance, as adsorbents for the removal of dyes from wastewaters. Adsorption, being a well-established technique, the review critically examines the specific potential of food waste constituents as dye adsorbents. The efficacy of food waste-based adsorbents is examined, besides addressing the possible adsorption mechanisms and the factors affecting phenomenon such as pH, temperature, contact time, adsorbent dosage, particle size, and ionic strength. Integration of information and communication technology approaches with adsorption isotherms and kinetic models are emphasized to bring out their role in improving overall modeling performance. Additionally, the reusability of adsorbents has been highlighted for effective substrate utilization. The review makes an attempt to stress the valorization of food waste materials to remove dyes from contaminated waters thereby ensuring long-term sustainability.

Biochar based photocatalyst for degradation of organic aqueous waste: A review

The advancement in the treatment technology for wastewater containing recalcitrant pollutants to lower the overall cost and time of the treatment processes is the prime demand. Biochar (BC) based photocatalyst have proved their potential application in the photo-degradation of a wide range of organic pollutants. The structural and chemical properties of the BC enhance the efficacy of photocatalyst, improving its optical properties with increased stability. This review gives an overview of the progress that occurred during the last five years in BC-based photocatalyst for degradation of recalcitrant organic waste in the aqueous system, emphasizing the role of BC in the photocatalytic performance with a brief discussion regarding the various sources of BC and different strategies used to modify the BC. Further, the critical challenges are discussed, which would be confronted during the scaling up and real-time application in wastewater treatment.

Assessment of modified Salvadora Persica for removal of 134Cs and 152+154Eu radionuclides from aqueous solution

Biosorption is a simple and economical method utilized to remove hazardous elements from a waste solution. In this study, a low-cost agricultural waste, Salvadora Persica, was modified with iron oxyhydroxide and evaluated as an economic biosorbent to remove cesium and europium radionuclides from their aqueous solutions. The modified biosorbent was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), elemental analysis as well as thermogravmetirc analysis (TGA). The sorption of ¹³⁴Cs and ^152+154Eu radioisotopes was investigated singly in a batch mode as a function of the solution pH, contact time, and the initial concentrations of the studied ions. The kinetic of the removal process was examined and it was found that the reaction obeys a pseudo-first-order model and the intraparticle diffusion is not the sole mechanism dominating the reaction. Temkin and Sips isotherm models provide the best fit for the equilibrium data. In addition, the sorption of cesium and europium ions was a spontaneous and endothermic process as inferred from thermodynamic studies. The reusability for the sorption of cesium and europium ions reveals the feasibility and efficacy of the modified biosorbent.

Advances in decontamination of wastewater using biomass-basedcomposites: A critical review

Contaminant removal from wastewater using natural biosorbents has been widely studied as a suitable and environmentally benign alternative for conventional techniques. Currently, researchers are working on various biomass-based composites for wastewater remediation to improve the performance of natural biosorbents. This review takes into focus a wide range of biomass-based composites like hydrogel composites, metal oxide composites, magnetic composites, polymer composites, carbon nanotubes (CNTs) and graphene composites, metal organic framework composites (MOFs) and clay composites for the removal of various contaminants from wastewater. It is evident from the literature survey that the composite fabrication involves the modification of morphological and textural features of the biomass which results in significant enhancement of adsorption capacity. Apart from this, regeneration of the used biomass-based composite is also studied in depth in order to overcome the problem of solid waste generation. This review would prove to be beneficial for researchers who are currently focusing on the development of cost-effective, easily available, recyclable biomass-based composites with enhanced adsorption capacities for wastewater treatment.

Enhanced surface properties, hydrophobicity, and sorption behavior of ZnO nanoparticle-impregnated biomass support for oil spill treatment

Metallic nanoparticles (NPs) have gained significant attention in recent years due to their efficiency in the adsorption of water pollutants. Except for magnetic NPs, metallic NPs are rarely used in oil sorption studies, due to the difficulty in recovering the NPs from the treated water. This study reports for the first time the application of ZnONPs for oil spill treatment. The ZnONPs were impregnated onto Musa acuminata peel (MP) support to form a novel material (ZnOMP), which was utilized for the sorption of oil from synthetic oil spills. The as-prepared sorbents were characterized by the SEM, EDS, BET, FTIR, FE-SEM, TGA, and XRD techniques. The presence of 31.32-nm average-sized ZnONPs enhanced the oil uptake characteristics, with clear affinity for the oil phase in comparison to the pristine MP. A maximum sorption capacity of 4.146 g/g and 5.236 g/g was obtained for biosorbents MP and ZnOMP, respectively, which was higher than most reported sorbents. The Freundlich model presented the best fit for the isotherm data, while the pseudo-second-order model was most suited for the kinetics. The presence of competing heavy metal ions in solution did not have any significant effect on the oil sorption capacity onto ZnOMP. The sorption mechanism was attributed to absorption and hydrophobic interactions. ZnONPs impregnated onto the biomass enhanced the spontaneity of oil uptake at higher temperatures. Over 82% desorption of the oil contaminant from the biosorbents was achieved during recovery, using petroleum ether and n-pentane as eluents. Concisely, ZnONPs enhanced the uptake and hydrophobic characteristic of MP biomass and showed good recovery and reusability. Thus, the application of ZnONPs impregnated onto biosorbents in oil spill treatment is highly recommended.

One-pot synthesis of zinc oxide nanoparticles via chemical precipitation for bromophenol blue adsorption and the antifungal activity against filamentous fungi

In this research, zinc oxide nanoparticles (ZnONPs) were prepared via a facile one-pot chemical precipitation approach and applied in the adsorption of bromophenol blue (BRB) and as antifungal agents against the filamentous fungi and plant pathogens; Alternaria alternata CGJM3078, Alternaria alternata CGJM3006 and Fusarium verticilliodes CGJM3823. The ZnONPs were characterized by the UV-Vis, FTIR, XRD, TGA, BET, SEM, TEM, and EDX techniques, which showed efficient synthesis. The characteristics ZnO UV-Vis absorption band was observed at 375 nm, while the XRD showed an average ZnONPs crystalline size of 47.2 nm. The SEM and TEM images showed an irregular shaped and aggregated porous structure of 65.3 nm average-sized ZnONPs. The TGA showed 22.9% weight loss at 800 °C indicating the high thermal stability of ZnONPs, while BET analysis revealed a surface area, pore volume and pore diameter of 9.259 m2/g, 0.03745 cm3/g and 9.87 nm respectively. The Freundlich, pseudo-second-order, and intra-particle diffusion models showed R2 > 0.9494 and SSE < 0.7412, thus, exhibited the best fit to the isotherm and kinetics models. Thermodynamics revealed feasible, endothermic, random, and spontaneous adsorption of BRB onto the synthesized ZnONPs. The antifungal assay conducted depicts strong antifungal activities against all three tested fungi. Noticeably, ZnONPs (0.002-5 mg/mL) showed maximum activities with the largest zone of inhibition against A. alternata CGJM 3006 from 25.09 to 36.28 mm. This was followed by the strain F. verticilliodes CGJM 3823 (range from 23.77 to 34.77 mm) > A. alternata CGJM3078 (range from 22.73 to 30.63 mm) in comparison to Bleach 5% (positive control). Additionally a model was proposed based on the possible underlying mechanisms for the antifungal effect. This research demonstrated the potent use of ZnONPs for the adsorption of BRB and as effective antifungal agents.

Biogenic and chemically synthesized Solanum tuberosum peel-silver nanoparticle hybrid for the ultrasonic aided adsorption of bromophenol blue dye

This work was aimed at the synthesis of a hybrid (STpe-AgNP), obtained by impregnation of silver nanoparticles (AgNP) onto Solanum tuberosum peel (STpe), for the ultrasonic assisted adsorption of bromophenol blue (BB) dye. SEM, FTIR, XRD, EDX, TGA and BET techniques were used to characterize the adsorbents. The XRD, SEM and EDX confirmed successful impregnation of AgNPs onto STpe to form the hybrid. The AgNPs impregnated onto the hybrid were found to be water stable at various pH values of 2.0-9.0. Chi-square (χ2 < 0.024) and linear regression (R2 > 0.996) showed that the Freundlich model was best fitted among the isotherm models, corroborated by the oriented site model. Kinetic analysis conformed to the intraparticle diffusion and pseudo-first-order rate equations, while thermodynamics displayed a physical, spontaneous and endothermic adsorption process. The presence of competing Pb(II), Ni(II), Cd(II) and Zn(II) metal ions in solution interfered with the adsorption of BB onto the biosorbents. In terms of reusability, STpe and STpe-AgNP showed BB desorption of 91.3% and 88.5% respectively, using NaOH as eluent. Ultra-sonication significantly enhanced the adsorption of BB by both adsorbents, but the impregnation of AgNPs only slightly improved adsorption of the dye from the simulated wastewater. This study also illustrated that pristine STpe biomass waste is a cheap viable option for the decontamination of BB from water.

Biosorption and regeneration potentials of magnetite nanoparticle loaded Solanum tuberosum peel for celestine blue dye

This research evaluated the adsorption of celestine blue (CB) onto a novel Solanum tuberosum waste-magnetite nanocomposite (Mt@STB), prepared by an ecofriendly impregnation of magnetite (Mt) nanoparticles onto Solanum tuberosum waste (STB). The adsorbents characterization revealed that Mt@STB had a surface area (18.92 m²/g), pHpzc (7.55), porous morphology as well as suitable functional groups for efficient sequestration of CB onto the composite. The SEM, XRD, and EDX showed successful incorporation of 31.21 nm average size Mt nanoparticles on Mt@STB. Faster kinetics of CB sequestration from the wastewater was obtained for Mt@STB (100 min) compared to STB (140 min). Among four isotherm models, the Langmuir exhibited the best fit with R² > 0.9971 and sum square errors (SSE) < 0.0151. The pristine STB and Mt@STB composite showed maximum monolayer CEB uptake of 7.61 and 9.02 mg/g, as well as optimum removal of 73.8 and 84.7%, respectively. The pseudo-second-order model was more suitable in the kinetic description, while thermodynamics revealed a physical, spontaneous, and endothermic CB uptake. Besides, the efficacy of the composite for CB was confirmed from efficient regeneration over three adsorption/desorption cycles, which specified the viability of Mt@STB as a sustainable material for the decontamination of CB polluted water. NOVELTY STATEMENT The adsorption of dyes from wastewaters has been widely studied due to the harmful effects on the ecosystem. However, research on the removal of celestine blue (CB) dye is rare despite its wide use in the nuclear and textile industries. Until date, there is no report on the adsorption of CB on biomaterial via biosorption. Therefore, the biosorption behavior of CB is presently unknown. Hence, this study reports the biosorption of CB onto a biosorbent (Solanum tuberosum peel [STB]) in an attempt to understand its biosorption behavior. Besides, the impregnation of magnetite (Mt) nanoparticles has been reported to enhance the uptake of most adsorbents for dye. To the best of our knowledge, such magnetic nanoparticle impregnation of STB has not been reported. We, therefore, synthesized a novel biowaste-magnetite composite (Mt@STB) and evaluated its potentials for the uptake as well as its reuse for CB biosorption.

Synthesis, characterization, and regeneration of an inorganic-organic nanocomposite (ZnO@biomass) and its application in the capture of cationic dye

Despite the efficiency of ZnO nanoparticle (NPs) composite adsorbents in the adsorption of various pollutants, there is presently no report on the combo of ZnONPs with biomass for adsorption. Besides, there is a dearth of information on the biosorption of celestine blue (CEB), a dye used in the nuclear and textile industry. In this study, biogenic-chemically mediated synthesis of a composite (ZnO@ACP) was prepared by the impregnation of ZnONPs onto Ananas comosus waste (ACP) for the adsorption of CEB. The SEM, EDX, FTIR, XRD, BET, and TGA characterizations showed the successful presence of ZnONPs on the biomass to form a nanocomposite. The uptake of CEB was enhanced by the incorporation of ZnONPs on ACP. A faster CEB adsorption onto ZnO@ACP (120 min) compared to ACP (160 min) was observed. The Langmuir (R² > 0.9898) and pseudo-second-order (R² > 0.9518) models were most appropriate in the description of the adsorption process. The impregnation of ZnONPs onto the biomass enhanced the spontaneity of the process and displayed endothermic characteristics. High CEB desorption of 81.3% from the dye loaded ZnO@ACP as well as efficient reusability showed the efficacy of the prepared nanocomposite for CEB adsorption.