In vitro selection of RNA aptamers that selectively bind danofloxacin

Aptamer Sensors for the Detection of Antibiotic Residues- A Mini-Review

Food security is a global issue, since it is closely related to human health. Antibiotics play a significant role in animal husbandry owing to their desirable broad-spectrum antibacterial activity. However, irrational use of antibiotics has caused serious environmental pollution and food safety problems; thus, the on-site detection of antibiotics is in high demand in environmental analysis and food safety assessment. Aptamer-based sensors are simple to use, accurate, inexpensive, selective, and are suitable for detecting antibiotics for environmental and food safety analysis. This review summarizes the recent advances in aptamer-based electrochemical, fluorescent, and colorimetric sensors for antibiotics detection. The review focuses on the detection principles of different aptamer sensors and recent achievements in developing electrochemical, fluorescent, and colorimetric aptamer sensors. The advantages and disadvantages of different sensors, current challenges, and future trends of aptamer-based sensors are also discussed.

Electrochemical Aptasensors for Antibiotics Detection: Recent Achievements and Applications for Monitoring Food Safety

Antibiotics are often used in human and veterinary medicine for the treatment of bacterial diseases. However, extensive use of antibiotics in agriculture can result in the contamination of common food staples such as milk. Consumption of contaminated products can cause serious illness and a rise in antibiotic resistance. Conventional methods of antibiotics detection such are microbiological assays chromatographic and mass spectroscopy methods are sensitive; however, they require qualified personnel, expensive instruments, and sample pretreatment. Biosensor technology can overcome these drawbacks. This review is focused on the recent achievements in the electrochemical biosensors based on nucleic acid aptamers for antibiotic detection. A brief explanation of conventional methods of antibiotic detection is also provided. The methods of the aptamer selection are explained, together with the approach used for the improvement of aptamer affinity by post-SELEX modification and computer modeling. The substantial focus of this review is on the explanation of the principles of the electrochemical detection of antibiotics by aptasensors and on recent achievements in the development of electrochemical aptasensors. The current trends and problems in practical applications of aptasensors are also discussed.

Translational control of enzyme scavenger expression with toxin-induced micro RNA switches

Biological computation requires in vivo control of molecular behavior to progress development of autonomous devices. miRNA switches represent excellent, easily engineerable synthetic biology tools to achieve user-defined gene regulation. Here we present the construction of a synthetic network to implement detoxification functionality. We employed a modular design strategy by engineering toxin-induced control of an enzyme scavenger. Our miRNA switch results show moderate synthetic expression control over a biologically active detoxification enzyme molecule, using an established design protocol. However, following a new design approach, we demonstrated an evolutionarily designed miRNA switch to more effectively activate enzyme activity than synthetically designed versions, allowing markedly improved extrinsic user-defined control with a toxin as inducer. Our straightforward new design approach is simple to implement and uses easily accessible web-based databases and prediction tools. The ability to exert control of toxicity demonstrates potential for modular detoxification systems that provide a pathway to new therapeutic and biocomputing applications.

Self-assembled DNA nanoparticles loaded with travoprost for glaucoma-treatment

Lipid DNA nanoparticles (NPs) exhibit an intrinsic affinity to the ocular surface and can be loaded by hybridization with fluorophore-DNA conjugates or with the anti-glaucoma drug travoprost by hybridizing an aptamer that binds the medication. In the travoprost-loaded NPs (Trav-NPs), the drug is bound by specific, non-covalent interactions, not requiring any chemical modification of the active pharmaceutical ingredient. Fluorescently labeled Trav-NPs show a long-lasting adherence to the eye, up to sixty minutes after eye drop instillation. Biosafety of the Trav-NPs was proved and in vivo. Ex vivo and in vivo quantification of travoprost via LC-MS revealed that Trav-NPs deliver at least twice the amount of the drug at every time-point investigated compared to the pristine drug. The data successfully show the applicability of a DNA-based drug delivery system in the field of ophthalmology for the treatment of a major retinal eye disease, i.e. glaucoma.

Predicting Future Prospects of Aptamers in Field-Effect Transistor Biosensors

Aptamers, in sensing technology, are famous for their role as receptors in versatile applications due to their high specificity and selectivity to a wide range of targets including proteins, small molecules, oligonucleotides, metal ions, viruses, and cells. The outburst of field-effect transistors provides a label-free detection and ultra-sensitive technique with significantly improved results in terms of detection of substances. However, their combination in this field is challenged by several factors. Recent advances in the discovery of aptamers and studies of Field-Effect Transistor (FET) aptasensors overcome these limitations and potentially expand the dominance of aptamers in the biosensor market.

Preparation of an Antidanofloxacin Monoclonal Antibody and Development of Immunoassays for Detecting Danofloxacin in Meat

Danofloxacin (DAF), a third-generation fluroquinolone (FQ), is widely used as a broad-spectrum antibacterial drug to prevent diseases in livestock and poultry. In this study, a highly specific and sensitive monoclonal antibody (mAb) against DAF was prepared. Also, the mAb was used for the indirect competitive enzyme-linked immunosorbent assay (icELISA) and immunochromatographic strip for the detection of DAF residues in meat. The IC₅₀ of the icELISA based on this mAb was 1.39 ng/mL, and the limit of detection was 0.2 ng/mL. According to the cross-reactivity (CR) experiment, the ELISA that we developed was highly specific and had low CR with other FQ analogues. Moreover, the cut-off of the immunochromatographic strip developed for detecting DAF in meat was 5 ng/mL. Overall, the developed ELISA and immunochromatographic strip based on the prepared mAb were proved reliable for the rapid detection of DAF in meat and can be considered as effective screening methods for food safety and quality management.

Aptamer assisted ultrafiltration cleanup with high performance liquid chromatography-fluorescence detector for the determination of OTA in green coffee

One of the most common mycotoxin contaminating feed and foodstuffs is Ochratoxin A (OTA). OTA has a chronic toxic effect and proved to be mutagenic, nephrotoxic, teratogenic, immunosuppressive, and carcinogenic. Aptamer with their specific affinity for OTA was used in this paper to create an analytical technique. Several methods have been reported for the determination of OTA in foods. However, most of these methods could not be applied to a complex food as green coffee because the interfering native fluorescent products made the quantification very difficult. In this work, we mixed two separations based techniques to identify and quantify OTA in green coffee. Aptamer assisted ultrafiltration as separation technique based on the size of molecules was applied to separate the free OTA, the quantification of OTA was established by a high-performance liquid chromatography (HPLC-FD) with a limit of detection (LOD) of 0.05 ng/mL for OTA. Artificially contaminated green coffee displayed a good range of OTA recoveries up to 97.7%. This method can be applied to the quantitative determination of OTA in green coffee at levels below the maximum levels proposed by the European Commission for green coffee. It also confirm that aptamers can be used as biorecognition element in diagnostic assays with commercial application for mycotoxin analysis.

Aptamer-Based Biosensors for Antibiotic Detection: A Review

Antibiotic resistance and, accordingly, their pollution because of uncontrolled usage has emerged as a serious problem in recent years. Hence, there is an increased demand to develop robust, easy, and sensitive methods for rapid evaluation of antibiotics and their residues. Among different analytical methods, the aptamer-based biosensors (aptasensors) have attracted considerable attention because of good selectivity, specificity, and sensitivity. This review gives an overview about recently-developed aptasensors for antibiotic detection. The use of various aptamer assays to determine different groups of antibiotics, like β-lactams, aminoglycosides, anthracyclines, chloramphenicol, (fluoro)quinolones, lincosamide, tetracyclines, and sulfonamides are presented in this paper.

Selection of specific aptamer against enrofloxacin and fabrication of graphene oxide based label-free fluorescent assay

Specific ssDNA aptamers for the antibiotic enrofloxacin (ENR) were isolated from an enriched nucleotide library by SELEX (Systematic Evolution of Ligands by EXponential enrichment) method with high binding affinity. After seven rounds, five aptamers were selected and identified. Apt58 with highest affinity and sensitivity (K_d = 14.19 nM) was employed to develop a label-free fluorescent biosensing approach based on aptamer, graphene oxide (GO) and native fluorescence of ENR for determination of ENR residue in raw milk samples. Under optimized experimental conditions, the linear range was from 5 nM to 250 nM and LOD was calculated to be 3.7 nM, and the recovery rate was between 94.1% and 108.5%. The integration of aptamer and GO in this bioassay provides a promising way for rapid, sensitive and cost-effective detection of ENR in real samples like raw milk.

Selection and Biosensor Application of Aptamers for Small Molecules

Small molecules play a major role in the human body and as drugs, toxins, and chemicals. Tools to detect and quantify them are therefore in high demand. This review will give an overview about aptamers interacting with small molecules and their selection. We discuss the current state of the field, including advantages as well as problems associated with their use and possible solutions to tackle these. We then discuss different kinds of small molecule aptamer-based sensors described in literature and their applications, ranging from detecting drinking water contaminations to RNA imaging.

Small-Molecule Binding Aptamers: Selection Strategies, Characterization, and Applications

Aptamers are single-stranded, synthetic oligonucleotides that fold into 3-dimensional shapes capable of binding non-covalently with high affinity and specificity to a target molecule. They are generated via an in vitro process known as the Systematic Evolution of Ligands by EXponential enrichment, from which candidates are screened and characterized, and then used in various applications. These applications range from therapeutic uses to biosensors for target detection. Aptamers for small molecule targets such as toxins, antibiotics, molecular markers, drugs, and heavy metals will be the focus of this review. Their accurate detection is needed for the protection and wellbeing of humans and animals. However, the small molecular weights of these targets, including the drastic size difference between the target and the oligonucleotides, make it challenging to select, characterize, and apply aptamers for their detection. Thus, recent (since 2012) notable advances in small molecule aptamers, which have overcome some of these challenges, are presented here, while defining challenges that still exist are discussed.

Highly Sensitive Colorimetric Detection of Ochratoxin A by a Label-Free Aptamer and Gold Nanoparticles

A label-free aptamer-based assay for the highly sensitive and specific detection of Ochratoxin A (OTA) was developed using a cationic polymer and gold nanoparticles (AuNPs). The OTA aptamer was used as a recognition element for the colorimetric detection of OTA based on the aggregation of AuNPs by the cationic polymer. By spectroscopic quantitative analysis, the colorimetric assay could detect OTA down to 0.009 ng/mL with high selectivity in the presence of other interfering toxins. This study offers a new alternative in visual detection methods that is rapid and sensitive for OTA detection.

Generation and characterization of quinolone-specific DNA aptamers suitable for water monitoring

Quinolones are antibiotics that are accredited in human and veterinary medicine but are regularly used in high quantities also in industrial livestock farming. Since these compounds are often only incompletely metabolized, significant amounts contaminate the aquatic environment and negatively impact on a variety of different ecosystems. Although there is increasing awareness of problems caused by pharmaceutical pollution, available methods for the detection and elimination of numerous pharmaceutical residues are currently inefficient or expensive. While this also applies to antibiotics that may lead to multi-drug resistance in pathogenic bacteria, aptamer-based technologies potentially offer alternative approaches for sensitive and efficient monitoring of pharmaceutical micropollutants. Using the Capture-SELEX procedure, we here describe the selection of an aptamer pool with enhanced binding qualities for fluoroquinolones, a widely used group of antibiotics in both human and veterinary medicine. The selected aptamers were shown to detect various quinolones with high specificity, while specific binding activities to structurally unrelated drugs were not detectable. The quinolone-specific aptamers bound to ofloxacin, one of the most frequently prescribed fluoroquinolone, with high affinity (KD=0.1-56.9 nM). The functionality of quinolone-specific aptamers in real water samples was demonstrated in local tap water and in effluents of sewage plants. Together, our data suggest that these aptamers may be applicable as molecular receptors in biosensors or as catcher molecules in filter systems for improved monitoring and treatment of polluted water.

Development of receptor-based inhibitory RNA aptamers for anthrax toxin neutralization

Anthrax toxin excreted by Bacillus anthracis is the key causative agent of infectious anthrax disease. In the present study, we targeted the binding of PA to the ATR/TEM8 Von Willebrand factor type A (VWA) domain, which we cloned into Escherichia coli and purified to homogeneity under denaturing conditions. To develop an anthrax toxin inhibitor, we selected and identified short single strand RNA aptamers (approximately 30mer) consisting of different sequences of nucleic acids with a high binding affinity in the 100 nanomolar range against the recombinant ATR/TEM8 VWA domain using systematic evolution of ligands by exponential enrichment (SELEX). Five candidate aptamers were further characterized by several techniques including secondary structural analysis. The inhibitor efficiency (IC50) of one of the aptamers toward anthrax toxin was approximately 5μM in macrophage RAW 264.7 cells, as determined from cytotoxicity analysis by MTT assay. We believe that the candidate aptamers should be useful for blocking the binding of PA to its receptor in order to neutralize anthrax toxin.

Aptamer-based technology for food analysis

Aptamers are short and functional single-stranded oligonucleotide sequences selected from systematic evolution of ligands by exponential enrichment (SELEX) process, which have the capacity to recognize various classes of target molecules with high affinity and specificity. Various analytical aptamers acquired by SELEX are widely used in many research fields, such as medicine, biology, and chemistry. However, the application of this innovative and emerging technology to food safety is just in infant stage. Food safety plays a very important role in our daily lives because varieties of poisonous and harmful substances in food affect human health. Aptamer technique is promising, which can overcome many disadvantages of existing detection methods in food safety, such as long detection time, low sensitivity, difficult, and expensive antibody preparation. This review provides an overview of various aptamer screening technologies and summarizes the recent applications of aptamers in food safety, and future prospects are also discussed.