Properties of catechol 2,3-dioxygenase from crude extract of Stenotrophomonas maltophilia strain KB2 immobilized in calcium alginate hydrogels

Synergistic enhancement of polycyclic aromatic hydrocarbon degradation by Arthrobacter sp. SZ-3 and Pseudomonas putida B6-2 under high Tween80 concentration: mechanisms and efficiency

This study investigates the advantages of combined microbial degradation of polycyclic aromatic hydrocarbons (PAHs) in reducing the inhibitory effects of high-concentration eluents commonly used in soil washing. A microbial synergistic strategy was proposed using Arthrobacter sp. SZ-3 and Pseudomonas putida B6-2 as the key bacteria in the presence of Tween 80. The results show that in systems with Tween 80, the SZ-3 strain exhibits a strong capacity to degrade three types of PAH compounds, while the B6-2 strain follows multiple degradation pathways. Mixed bacteria achieved degradation rates 60.70% higher than single bacteria at varying concentrations of Tween 80. Additionally, the average growth rates of mixed bacteria increased by 1.17-1.37 times, aligning with the changes in the functional group. Protein activity detection within each degradation system corresponded with growth quantity and the cyclic variation characteristics of ETS enzyme activity. Notably, the ETS activity of mixed bacteria was 150% higher than that of single bacteria. At a Tween 80 concentration of 500 mg/L, the degradation rates of PAHs (Phe, Flu, Pyr) by mixed bacteria were significantly higher than those by single bacteria. The catechol 1,2-dioxygenase activity of mixed bacteria was 2.30 times higher than that of single bacteria. While Tween 80 did not alter the PAH degradation pathways, it significantly influenced the accumulation amount and duration of the characteristic intermediate product. This provides a reference for the remediation of recalcitrant pollutants under conditions involving high-concentration surfactants.

Oxidoreductase enzymes: Characteristics, applications, and challenges as a biocatalyst

Oxidoreductases are enzymes with distinctive characteristics that favor their use in different areas, such as agriculture, environmental management, medicine, and analytical chemistry. Among these enzymes, oxidases, dehydrogenases, peroxidases, and oxygenases are very interesting. Because their substrate diversity, they can be used in different biocatalytic processes by homogeneous and heterogeneous catalysis. Immobilization of these enzymes has favored their use in the solution of different biotechnological problems, with a notable increase in the study and optimization of this technology in the last years. In this review, the main structural and catalytical features of oxidoreductases, their substrate specificity, immobilization, and usage in biocatalytic processes, such as bioconversion, bioremediation, and biosensors obtainment, are presented.

Mechanism of polycyclic aromatic hydrocarbons degradation in the rhizosphere of Phragmites australis: Organic acid co-metabolism, iron-driven, and microbial response

Microbial co-metabolism is crucial for the efficient biodegradation of polycyclic aromatic hydrocarbons (PAHs); however, their intrinsic mechanisms remain unclear. To explore the co-metabolic degradation of PAHs, root organic acids (ROAs) (phenolic ROAs: caffeic acid [CA] and ferulic acid [FA]; non-phenolic ROAs: oxalic acid [OA]) were exogenously added as co-metabolic substrates under high (HFe) and low (LFe) iron levels in this study. The results demonstrated that more than 90% of PAHs were eliminated from the rhizosphere of Phragmites australis. OA can promote the enrichment of unrelated degrading bacteria and non-specific dioxygenases. FA with a monohydroxy structure can activate hydroxylase; however, it relies on phytosiderophores released by plants (such as OA) to adapt to stress. Therefore, non-specific co-metabolism occurred in these units. The best performance for PAH removal was observed in the HFe-CA unit because: (a) HFe concentrations enriched the Fe-reducing and denitrifying bacteria and promoted the rate-limiting degradation for PAHs as the enzyme cofactor; (b) CA with a dihydroxyl structure enriched the related degrading bacteria, stimulated specific dioxygenase, and activated Fe to concentrate around the rhizosphere simultaneously to perform the specific co-metabolism. Understanding the co-metabolic degradation of PAHs will help improve the efficacy of rhizosphere-mediated remediation.

Formulation of synthetic bacteria consortia for enzymatic biodegradation of polyaromatic hydrocarbons contaminated soil: soil column study

As an efficient method to remove contaminants from highly polluted sites, enzyme biodegradation addresses unresolved issues such as bioremediation inefficiency. In this study, the key enzymes involved in PAH degradation were brought together from different arctic strains for the biodegradation of highly contaminated soil. These enzymes were produced via a multi-culture of psychrophilic Pseudomonas and Rhodococcus strains. As a result of biosurfactant production, the removal of pyrene was sufficiently prompted by Alcanivorax borkumensis. The key enzymes (e.g., naphthalene dioxygenase, pyrene dioxygenase, catechol-2,3 dioxygenase, 1-hydroxy-2-naphthoate hydroxylase, protocatechuic acid 3,4-dioxygenase) obtained via multi-culture were characterized by tandem LC-MS/MS and kinetic studies. To simulate in situ application of produced enzyme solutions, pyrene- and dilbit-contaminated soil was bioremediated in soil columns and flask tests by injecting enzyme cocktails from the most promising consortia. The enzyme cocktail contained about 35.2 U/mg protein pyrene dioxygenase, 61.4 U/mg protein naphthalene dioxygenase, 56.5 U/mg protein catechol-2,3-dioxygenase, 6.1 U/mg protein 1-hydroxy-2-naphthoate hydroxylase, and 33.5 U/mg protein protocatechuic acid (P3,4D) 3,4-dioxygenase enzymes. It was found that after 6 weeks, the average pyrene removal values showed that the enzyme solution could be effective in the soil column system (80-85% degradation of pyrene).

PLGA-based nanoparticles for the treatment of cancer: current strategies and perspectives

Research on cancer treatment is always of great importance because of the extensive and difficult treatment options and side effects of chemotherapeutic agents. Due to this, novel techniques for cancer treatment are the need of the day. Nowadays, nanotechnology is of great interest for its applications as diagnostic tools, theragnostic, contrasting agents, and vehicles for delivering drugs. Nanoparticles (NPs) are made up of biocompatible and biodegradable polymers that improve the pharmacokinetic and pharmacodynamic properties of drugs, reduce side effects, improve stability, prolong the release of drug, and reduce the dosing frequency. Poly (lactic-co-glycolic acid) (PLGA) is FDA-approved synthetic polymer which can be used to formulate NPs that can be targeted to a specific site for the safe and effective delivery of drugs. PLGA-based NPs can be used for a variety of cancer therapies including tumor-targeted drug delivery, gene therapy, hyperthermia, and photodynamic therapy. This article discusses the method of preparation, characterization, encapsulation of chemotherapeutic drugs, effect of physicochemical properties of PLGA- based NPs, and how we can exploit these aspects through various methods of preparation for drug loading, biodistribution, target specificity, and their use in cancer treatment. Along with these targeting strategies, gene therapy, cancer immunotherapy, and various applications have also been discussed. This article also aims to discuss the incorporation of diagnostic tools and therapeutic moiety in one versatile formulation of PLGA-NPs and the difficulties faced in translating this promising tool to clinical use.

Mechanism of Microbial Detoxification of Heavy Metals: A Review

Heavy metal contamination from anthropogenic activities has an adverse effect on the environment due to its cytotoxicity, carcinogenicity and mutagenicity. Environment harbours microorganisms, some of which have been found to modify physico-chemical conditions of their surrounding environment through certain processes such as detoxification, metal homeostasis, precipitation, redox transformations etc. Investigations in the past have shown that short term contact with metals of certain bacteria causes the selection of resistant bacteria within weeks, while a prolonged exposure showed selected strains able to thrive better. Hence biotic methods could assist removal of heavy metals based on biosorption or bioaccumulation by microorganisms, which are cost-effective and environmental friendly in the long run. Microbial remediation is influenced by biotic and environmental factors as also the contamination site characteristics. The aim of this paper is to highlight and review some of the mechanisms of microbial remediation through techniques such as biostimulation, bioaugmentation etc.

Enzymatic biodegradation of highly p-xylene contaminated soil using cold-active enzymes: A soil column study

Enzymatic bioremediation is a sustainable and environment-friendly method for the clean-up of contaminated soil and water. In the present study, enzymatic bioremediation was designed using cold-active enzymes (psychrozymes) which catalyze oxidation steps of p-xylene biodegradation in highly contaminated soil (initial concentration of 13,000 mg/kg). The enzymes were obtained via co-culture of two psychrophilic Pseudomonas strains and characterized by kinetic studies and tandem LC-MS/MS. To mimic in situ application of enzyme mixture, bioremediation of p-xylene contaminated soil was carried out in soil column (140 mL) tests with the injection (3 pore volume) of different concentrations of enzyme cocktails (X, X/5, and X/10). Enzyme cocktail in X concentration contained about 10 U/mL of xylene monooxygenase (XMO) and 20 U/mL of catechol 2, 3 dioxygenases (C2,3D). X/5 and X/10 correspond to 5x and 10x dilution of enzyme cocktail respectively. The results showed that around 92-94% p-xylene removal was achieved in the treated soil column with enzyme concentration X, X/5 after second enzyme injection. While the p-xylene removal rate obtained by X/10 concentration of enzyme was less than 30% and near to untreated soil column (22.2%). The analysis of microbial diversity and biotoxicity assay (root elongation and seed germination) confirmed the advantage of using enzymes as a green and environmentally friendly approach for decontamination of pollutants with minimal or even positive effects on microbial community and also enrichment of soil after treatment.

Characterization of Gentisate 1,2-Dioxygenase from Pseudarthrobacter phenanthrenivorans Sphe3 and Its Stabilization by Immobilization on Nickel-Functionalized Magnetic Nanoparticles

The aim of this study was the biochemical and kinetic characterization of the gentisate 1,2-dioxygenase (GDO) from Pseudarthrobacter phenanthrenivorans Sphe3 and the development of a nanobiocatalyst by its immobilization on Ni2+-functionalized Fe3O4-polydopamine magnetic nanoparticles (Ni2+-PDA-MNPs). This is the first GDO to be immobilized. The gene encoding the GDO was cloned with an N-terminal His-tag and overexpressed in E. coli. The nanoparticles showed a high purification efficiency of GDO from crude cell lysates with a maximum activity recovery of 97%. The immobilized enzyme was characterized by Fourier transform infrared spectroscopy (FTIR). The reaction product was identified by 1H NMR. Both free and immobilized GDO exhibited Michaelis–Menten kinetics with Km values of 25.9 ± 4.4 and 82.5 ± 14.2 μM and Vmax values of 1.2 ± 0.1 and 0.03 ± 0.002 mM*s−1, respectively. The thermal stability of the immobilized GDO was enhanced at 30 °C, 40 °C, and 50 °C, compared to the free GDO. Stored at −20 °C, immobilized GDO retained more than 60% of its initial activity after 30 d, while the free enzyme completely lost its activity after 10 d. Furthermore, the immobilized nanoparticle–enzyme conjugate retained more than 50% enzyme activity up to the fifth cycle.

Analysis of the mechanism for enhanced pyrene biodegradation based on the interactions between iron-ions and Rhodococcus ruber strain L9

A slow degradation rate and low transformation efficiency are the main problems in the biodegradation of polycyclic aromatic hydrocarbons (PAHs). This study selected pyrene as the target PAH to investigate the effect of ferrous ion and ferric ion on pyrene degradation. The driving effect and mechanism, including the interaction between pyrene and iron ions and the bacterial physiological response during the biodegradation process by Rhodococcus ruber strain L9, were investigated. The results showed that iron ions did not enhance bacterial growth but improved bacteria's pyrene removal capacity, contributing to the total efficiency of pyrene biodegradation. The process started with an initial formation of "cation-π" between Fe (III) and pyrene, which subsequently drove the pyrene removal process and accelerated the bacterial metabolic process. Moreover, a significant increase in the protein concentration, catechol dioxygenase (C12O and C23O) activities, and intracellular protein regulation in crude enzyme solution indicate a positive response of the bacteria during the iron ion-enhanced pyrene degradation process.

Uranium removal from complex mining waters by alginate beads doped with cells of Stenotrophomonas sp. Br8: Novel perspectives for metal bioremediation

Uranium-containing effluents generated by nuclear energy industry must be efficiently remediated before release to the environment. Currently, numerous microbial-based strategies are being developed for this purpose. In particular, the bacterial strain Stenotrophomonas sp. Br8, isolated from U mill tailings porewaters, has been already shown to efficiently precipitate U(VI) as stable U phosphates mediated by phosphatase activity. However, the upscaling of this strategy should overcome some constraints regarding cell exposure to harsh environmental conditions. In the present study, the immobilization of Br8 biomass in an inorganic matrix was optimized to provide protection to the cells as well as to make the process more convenient for real-scale utilization. The use of biocompatible, highly porous alginate beads for Br8 cells immobilization resulted the best alternative when investigating by a multidisciplinary approach (High-Angle Annular Dark-Field Scanning Transmission Electron Microscopy (HAADF-STEM), Environmental Scanning Electron Microscopy (ESEM), Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance, etc.) several consolidated entrapment methods. This biomaterial was applied to complex real U mining porewaters (containing 47 mg/L U) in presence of an organic phosphate source (glycerol-2-phosphate) to produce reactive free orthophosphates through Br8 phosphatase activity. Uranium immobilization rates around 98 % were observed after one cycle of 72 h. In terms of U removal ability as a function of biomass, Br8-doped alginate beads were determined to remove up to 1199.5 mg U/g dry biomass over two treatment cycles. Additionally, optimized conditions for storing Br8-doped beads and for a correct application were assessed. Results for U accumulation kinetics and HAADF-STEM/ESEM analyses revealed that U removal by the immobilized cells is a biphasic process combining a first passive U sorption onto bead and/or cell surfaces and a second slow active biomineralization. This work provides new practical insights into the biological and physico-chemical parameters governing a high-efficient U bioremediation process based on the phosphatase activity of immobilized bacterial cells when applied to complex mining waters under laboratory conditions.

Sustainable production and co-immobilization of cold-active enzymes from Pseudomonas sp. for BTEX biodegradation

Toluene/o-Xylene Monooxygenase (ToMO) is equipped with a broad spectrum of aromatic substrate specificity (such as BTEX; benzene, toluene, ethylbenzene, and isomers of xylenes). TOMO has can hydroxylate more than a single position of aromatic rings in two consecutive monooxygenation reactions. Catechol 1,2-dioxygenase (C1,2D) is an iron-containing enzyme able to cleave the ring of catechol (the converted product from ToMO) for complete detoxification of BTEX. In this study, cold-active ToMO and C1,2D were produced using newly isolated psychrophilic Pseudomonas S2TR-14 in the minimal salt medium supplemented with crustacean waste and different concentrations of used motor oil (0.2-2% (v/v)). Crude ToMO and C1,2D were immobilized into micro/nano biochar-chitosan matrices and used for BTEX biodegradation. The results showed that the highest enzyme production (12 U/mg for ToMO and 22 U/mg for C1,2D) was achieved at the presence of 0.5% v/v used motor oil compared to the control group without motor oil (0.07 and 0.06 U/mg). High immobilization yield was achieved due to covalent bonding of ToMO (92.26% for micro matrix and 77.20% for nano matrix) and C1,2D (87.57% for micro matrix and 74.79% for nano matrix) with matrices. FTIR spectra confirmed the immobilization of enzymes on the surface of microbiochar and nanobiochar-chitosan matrices as proper support. The immobilization increased the storage stability of the enzymes with more than 50% residual activity after 30 days at 4 ± 1 °C, while the free form of enzymes had less than 10% of its activity. Immobilized enzymes degraded more than 80% of BTEX (~200 mg/L in groundwater and ~10,000 mg/kg in soil) at 10 ± 1 °C in groundwater and soil. Therefore, integrated use of microbiochar and nanobiochar with chitosan for co-immobilization of ToMO and C1,2D can be a potential way to remove petroleum hydrocarbons with higher efficiency from contaminated groundwater and soil.

Comparative Genomics of Stenotrophomonas maltophilia and Stenotrophomonas rhizophila Revealed Characteristic Features of Both Species

Although Stenotrophomonas maltophilia strains are efficient biocontrol agents, their field applications have raised concerns due to their possible threat to human health. The non-pathogenic Stenotrophomonas rhizophila species, which is closely related to S. maltophilia, has been proposed as an alternative. However, knowledge regarding the genetics of S. rhizophila is limited. Thus, the aim of the study was to define any genetic differences between the species and to characterise their ability to promote the growth of plant hosts as well as to enhance phytoremediation efficiency. We compared 37 strains that belong to both species using the tools of comparative genomics and identified 96 genetic features that are unique to S. maltophilia (e.g., chitin-binding protein, mechanosensitive channels of small conductance and KGG repeat-containing stress-induced protein) and 59 that are unique to S. rhizophila (e.g., glucosylglycerol-phosphate synthase, cold shock protein with the DUF1294 domain, and pteridine-dependent dioxygenase-like protein). The strains from both species have a high potential for biocontrol, which is mainly related to the production of keratinases (KerSMD and KerSMF), proteinases and chitinases. Plant growth promotion traits are attributed to the biosynthesis of siderophores, spermidine, osmoprotectants such as trehalose and glucosylglycerol, which is unique to S. rhizophila. In eight out of 37 analysed strains, the genes that are required to degrade protocatechuate were present. While our results show genetic differences between the two species, they had a similar growth promotion potential. Considering the information above, S. rhizophila constitutes a promising alternative for S. maltophilia for use in agricultural biotechnology.

Evaluation of aromatic hydrocarbon decomposition catalyzed by the dioxygenase system and substitution of ferredoxin and ferredoxin reductase

In this study, the catalytic activity and kinetic characteristics of the aromatic hydrocarbon dioxygenase system and the possibility of substituting its ferredoxin and ferredoxin reductase components were evaluated. The genes encoding toluene dioxygenase and toluene dihydrodiol dehydrogenase were cloned from Pseudomonas putida F1, and the corresponding enzymes were overexpressed and purified to homogeneity. Oxidative hydroxylation of toluene to cis-toluene dihydrodiol was catalyzed by toluene dioxygenase, and its subsequent dehydrogenation to 3-methylcatechol was catalyzed by toluene dihydrodiol dehydrogenase. The specific activity of the dioxygenase was 2.82 U/mg-protein, which is highly remarkable compared with the values obtained in previous researches conducted with crude extracts or insoluble forms of enzymes. Kinetic parameters, as characterized by the Hill equation, were v_max = 497.2 μM/min, K_M = 542.4 μM, and n_H = 2.2, suggesting that toluene dioxygenase has at least three cooperative binding sites for toluene. In addition, the use of alternative ferredoxins and reductases was examined. Ferredoxin cloned from CYP153 could transfer electrons to the iron sulfur protein component of toluene dioxygenase. The ferredoxin could be reduced by ferredoxin, rubredoxin, and putidaredoxin reductases of CYP153, alkane-1 monooxygenase, and camphor 5-monooxygenase, respectively. The results provide useful information regarding the effective enzymatic biotreatment of hazardous aromatic hydrocarbon contaminants.

Mycoremediation of PCBs by Pleurotus ostreatus: Possibilities and Prospects

With the rising awareness on environmental issues and the increasing risks through industrial development, clean up remediation measures have become the need of the hour. Bioremediation has become increasingly popular owing to its environmentally friendly approaches and cost effectiveness. Polychlorinated biphenyls (PCBs) are an alarming threat to human welfare as well as the environment. They top the list of hazardous xenobiotics. The multiple effects these compounds render to the niche is not unassessed. Bioremediation does appear promising, with myco remediation having a clear edge over bacterial remediation. In the following review, the inputs of white-rot fungi in PCB remediation are examined and the lacunae in the practical application of this versatile technology highlighted. The unique abilities of Pleurotus ostreatus and its deliverables with respect to removal of PCBs are presented. The need for improvising P. ostreatus-mediated remediation is emphasized.

Seed coating with beneficial microorganisms for precision agriculture

Seed coating is a technique of covering seeds with adhesive agents to improve seed performance and plant establishment while reducing production cost. To meet the needs of development of precision agriculture, seed coating has been widely used in agriculture as an effective means to alleviate biotic and abiotic stresses, thus enhancing crop growth, yield, and health. Plant growth promoting microorganisms (PGPM) are recognized as essential contributors to improving agricultural productivity via direct application to the rhizosphere and plant tissues, or seed inoculation. However, during conventional inoculation processes, several factors such as insufficient microbial survival, hindrance in the application of biocontrol inocula to the seeds and exposure to unsuitable temperature and light in subsequent seed storage, force us to explore efficient and reliable microbial application tools. Recently, biological seed coating with PGPM is proposed as an alternative to conventional seed treatment (such as fertilizer and protection products) due to its ecological safety and socio-economic aspects. In this review, microbial seed coating technology and its contribution to sustainable precision agriculture are well discussed and highlighted in the extensive table and elaborate schematic drawings.

Degradation of phenol at high concentrations using immobilization of Pseudomonas putida P53 into sawdust entrapped in sodium-alginate beads

Phenols are distributed either as natural or artificial mono-aromatic compounds in various environmental sites as major pollutants. The objective of this study was the immobilization of the phenol degrading bacteria P. putida P53 and A. scleromae P69 in sodium-alginate beads and sawdust as carriers and evaluate the biodegradation ability. The biodegradation ability of strains in free form were evaluated and P. putida P53 was shown to biodegrade up to 1,800 mg/L phenol. Bacterial biomass was prepared and attached to carrier with entrapment and attachment methods. Prepared beads were added to Erlenmeyer flasks containing different concentrations of phenol in BH medium (1,800, 2,200, 2,600 and 3,000 mg/L). According to the results, phenol biodegradation efficiency of immobilized bacteria in sawdust was more than free form. Strain P53 had better biodegradation than P69 strain. Attachment and entrapments into carriers had positive results, Scanning electron micrograph (SEM) images indicated that alginate beads were globular shapes (10 nm), and strains aggregated between the large cavities of the matrix. Comparison of sawdust and alginate as carriers for degradation of phenol at high concentrations demonstrated that sawdust improved biodegradation better, and immobilized P53 into sawdust entrapped in sodium-alginate beads can be used for biodegradation purposes.

4-Chlorophenol biodegradation facilitator composed of recombinant multi-biocatalysts immobilized onto montmorillonite

A biodegradation facilitator which catalyzes the initial steps of 4-chlorophenol (4-CP) oxidation was prepared by immobilizing multiple enzymes (monooxygenase, CphC-I and dioxygenase, CphA-I) onto a natural inorganic support. The enzymes were obtained via overexpression and purification after cloning the corresponding genes (cphC-I and cphA-I) from Arthrobacter chlorophenolicus A6. Then, the recombinant CphC-I was immobilized onto fulvic acid-activated montmorillonite. The immobilization yield was 60%, and the high enzyme activity (82.6%) was retained after immobilization. Kinetic analysis indicated that the Michaelis-Menten model parameters for the immobilized CphC-I were similar to those for the free enzyme. The enzyme stability was markedly enhanced after immobilization. The immobilized enzyme exhibited a high level of activity even after repetitive use (84.7%) and powdering (65.8%). 4-CP was sequentially oxidized by a multiple enzyme complex, comprising the immobilized CphC-I and CphA-I, via the hydroquinone pathway: oxidative transformation of 4-CP to hydroxyquinol followed by ring fission of hydroxyquinol.

Enzymatic degradation of aromatic hydrocarbon intermediates using a recombinant dioxygenase immobilized onto surfactant-activated carbon nanotube

This study examined the enzymatic decomposition of aromatic hydrocarbon intermediates (catechol, 4-chlorocatechol, and 3-methylcatechol) using a dioxygenase immobilized onto single-walled carbon nanotube (SWCNT). The surfaces of SWCNTs were activated with surfactants. The dioxygenase was obtained by recombinant technique: the corresponding gene was cloned from Arthrobacter chlorophenolicus A6, and the enzyme was overexpressed and purified subsequently. The enzyme immobilization yield was 62%, and the high level of enzyme activity was preserved (60-79%) after enzyme immobilization. Kinetic analyses showed that the substrate utilization rates and the catalytic efficiencies of the immobilized enzyme for all substrates (target aromatic hydrocarbon intermediates) tested were similar to those of the free enzyme, indicating that the loss of enzyme activity was minimal during enzyme immobilization. The immobilized enzyme was more stable than the free enzyme against abrupt changes in pH, temperature, and ionic strength. Moreover, it retained high enzyme activity even after repetitive use.

Noncovalent and covalent immobilization of oxygenase on single-walled carbon nanotube for enzymatic decomposition of aromatic hydrocarbon intermediates

The decomposition of various aromatic hydrocarbon intermediates was examined using a recombinant oxidative enzyme immobilized on single-walled carbon nanotubes (SWCNTs). Hydroxyquinol 1,2-dioxygenase (CphA-I), which catalyzes ring cleavage of catechol and its analogues, was obtained from Arthrobacter chlorophenolicus A6 via cloning, overexpression, and subsequent purification. This recombinant enzyme was immobilized on SWCNTs by physical adsorption and covalent coupling in the absence and presence of N-hydroxysuccinimide. The immobilization yield was as high as 52.1%, and a high level of enzyme activity of up to 64.7% was preserved after immobilization. Kinetic analysis showed that the substrate utilization rates (vmax) and catalytic efficiencies (kcat/KM) of the immobilized enzyme for all substrates evaluated were similar to those of the free enzyme, indicating minimal loss of enzyme activity during immobilization. The immobilized enzyme was more stable toward extreme pH, temperature, and ionic strength conditions than the free enzyme. Thus, the oxidative enzyme immobilized on SWCNTs can be used as an effective and stable biocatalyst for the biochemical remediation process if further investigations would be carried out under field conditions.

Isolation and characterization of two novel halotolerant Catechol 2, 3-dioxygenases from a halophilic bacterial consortium

Study of enzymes in halophiles will help to understand the mechanism of aromatic hydrocarbons degradation in saline environment. In this study, two novel catechol 2,3-dioxygenases (C23O1 and C23O2) were cloned and overexpressed from a halophilic bacterial consortium enriched from an oil-contaminated saline soil. Phylogenetic analysis indicated that the novel C23Os and their relatives formed a new branch in subfamily I.2.A of extradiol dioxygenases and the sequence differences were further analyzed by amino acid sequence alignment. Two enzymes with the halotolerant feature were active over a range of 0–30% salinity and they performed more stable at high salinity than in the absence of salt. Surface electrostatic potential and amino acids composition calculation suggested high acidic residues content, accounting for their tolerance to high salinity. Moreover, two enzymes were further characterized. The enzymes activity both increased in the presence of Fe³⁺, Fe²⁺, Cu²⁺ and Al³⁺ and showed no significant inhibition by other tested metal ions. The optimal temperatures for the C23Os were 40 °C and 60 °C and their best substrates were catechol and 4-methylcatechol respectively. As the firstly isolated and characterized catechol dioxygenases from halophiles, the two halotolerant C23Os presented novel characteristics suggesting their potential application in aromatic hydrocarbons biodegradation.

Effect of ultrasound on the diffusion properties of casein entrapped in alginate-chitosan gel

The effects of ultrasound-assisted and pre-ultrasound treatment on the diffusion properties of casein imbedded by alginate-chitosan gel were investigated. The fluorescence spectrophotometry for determining the fluorescence intensity of casein was established to calculate the diffusion coefficient (De). Scanning electron microscope (SEM) was used to observe the microstructure of gel beads. The results showed that two different kinds of ultrasonic treatments had obvious distinctions on the casein diffusion. As the frequency increased, the value of De decreased from 28.56 × 10(-4)m(2)s(-1) (28 kHz) to 2.57 × 10(-4)m(2)s(-1) (135 kHz) during the ultrasound-assisted process. While, the minimum De of 8.6 × 10(-4)m(2)s(-1) was achieved at the frequency of 50 kHz for the pre-ultrasound treatment. The impact of power on the diffusion showed that De increased with the increase of ultrasound power until it reached the highest value 28.56 × 10(-4)m(2)s(-1) (0.45 W/cm(2)) in the ultrasound-assisted process. It would reach the maximum value (16 × 10(-4)m(2)s(-1)) when the power was 0.25 W/cm(2) in the pretreatment ultrasound process. SEM analysis exhibited that the gel structural changes (area ratio) were in accordance with De through different ultrasonic treatment. This was mainly due to the mechanical action and cavitation of the ultrasonic treatment. This study is important to explain the diffusion properties of large molecules and explore the mechanism of enzyme immobilization treated by ultrasound.

Calcium alginate matrix increases the stability and recycling capability of immobilized endo-β-1,4-xylanase from Geobacillus stearothermophilus KIBGE-IB29

Exploration of microbial pool from extremely diversified ecosystem is significantly important for various industrial applications. Bacterial communities from extreme habitats including volcanic vents, hot springs, and industrial sectors are eagerly explored for the isolation of thermophiles. Geobacillus stearothermophilus KIBGE-IB29, isolated from blast furnace site of a steel processing industry, is capable of producing thermostable endo-β-1,4-xylanase. In the current study, this enzyme was immobilized within calcium alginate beads using entrapment technique. Amalgamation of sodium alginate (40.0 gL(-1)) and calcium chloride (0.4 M) was used for the formation of immobilized beads. It was observed that temperature (50 °C) and pH (7.0) optima of immobilized enzyme remained same, but enzyme-substrate reaction time increased from 5.0 to 30.0 min as compared to free enzyme. Diffusion limit of high molecular weight xylan (corncob) caused a decline in V max of immobilized enzyme from 4773 to 203.7 U min(-1), whereas K m value increased from 0.5074 to 0.5722 mg ml(-1) with reference to free enzyme. Immobilized endo-β-1,4-xylanase showed its stability even at high temperatures as compared to free enzyme and retained 18 and 9 % residual activity at 70 and 80 °C, respectively. Immobilized enzyme also exhibited sufficient recycling efficiency up to five reaction cycles which indicated that this enzyme can be a plausible candidate in paper and pulp industry.

Immobilization as a strategy for improving enzyme properties-application to oxidoreductases

The main objective of the immobilization of enzymes is to enhance the economics of biocatalytic processes. Immobilization allows one to re-use the enzyme for an extended period of time and enables easier separation of the catalyst from the product. Additionally, immobilization improves many properties of enzymes such as performance in organic solvents, pH tolerance, heat stability or the functional stability. Increasing the structural rigidity of the protein and stabilization of multimeric enzymes which prevents dissociation-related inactivation. In the last decade, several papers about immobilization methods have been published. In our work, we present a relation between the influence of immobilization on the improvement of the properties of selected oxidoreductases and their commercial value. We also present our view on the role that different immobilization methods play in the reduction of enzyme inhibition during biotechnological processes.

Nanofibrillar Peptide hydrogels for the immobilization of biocatalysts for chemical transformations

Enzymes are attractive, "green" alternatives to chemical catalysts within the industrial sector, but their robustness to environmental conditions needs optimizing. Here, an enzyme is tagged chemically and recombinantly with a self-assembling peptide that allows the conjugate to spontaneously assemble with pure peptide to form β-sheet-rich nanofibers decorated with tethered enzyme. Above a critical concentration, these fibers entangle and form a 3D hydrogel. The immobilized enzyme catalyzes chemical transformations and critically its stability is increased significantly where it retains activity after exposure to high temperatures (90 °C) and long storage times (up to 12 months).

Activity of a carboxyl-terminal truncated form of catechol 2,3-dioxygenase from Planococcus sp. S5

Catechol 2,3-dioxygenases (C23Os, E.C.1.13.12.2) are two domain enzymes that catalyze degradation of monoaromatic hydrocarbons. The catalytically active C-domain of all known C23Os comprises ferrous ion ligands as well as residues forming active site pocket. The aim of this work was to examine and discuss the effect of nonsense mutation at position 289 on the activity of catechol 2,3-dioxygenase from Planococcus strain. Although the mutant C23O showed the same optimal temperature for activity as the wild-type protein (35°C), it exhibited activity slightly more tolerant to alkaline pH. Mutant enzyme exhibited also higher affinity to catechol as a substrate. Its K_m (66.17 µM) was approximately 30% lower than that of wild-type enzyme. Interestingly, removal of the C-terminal residues resulted in 1.5- to 1.8-fold (P < 0.05) increase in the activity of C23OB61 against 4-methylcatechol and 4-chlorocatechol, respectively, while towards catechol the activity of the protein dropped to about 80% of that of the wild-type enzyme. The results obtained may facilitate the engineering of the C23O for application in the bioremediation of polluted areas.

Degradation potential of protocatechuate 3,4-dioxygenase from crude extract of Stenotrophomonas maltophilia strain KB2 immobilized in calcium alginate hydrogels and on glyoxyl agarose

Microbial intradiol dioxygenases have been shown to have a great potential for bioremediation; however, their structure is sensitive to various environmental and chemical agents. Immobilization techniques allow for the improvement of enzyme properties. This is the first report on use of glyoxyl agarose and calcium alginate as matrixes for the immobilization of protocatechuate 3,4-dioxygenase. Multipoint attachment of the enzyme to the carrier caused maintenance of its initial activity during the 21 days. Immobilization of dioxygenase in calcium alginate or on glyoxyl agarose resulted in decrease in the optimum temperature by 5 °C and 10 °C, respectively. Entrapment of the enzyme in alginate gel shifted its optimum pH towards high-alkaline pH while immobilization of the enzyme on glyoxyl agarose did not influence pH profile of the enzyme. Protocatechuate 3,4-dioygenase immobilized in calcium alginate showed increased activity towards 2,5-dihydroxybenzoate, caffeic acid, 2,3-dihydroxybenzoate, and 3,5-dihydroxybenzoate. Slightly lower activity of the enzyme was observed after its immobilization on glyoxyl agarose. Entrapment of the enzyme in alginate gel protected it against chelators and aliphatic alcohols while its immobilization on glyoxyl agarose enhanced enzyme resistance to inactivation by metal ions.

Effective biochemical decomposition of chlorinated aromatic hydrocarbons with a biocatalyst immobilized on a natural enzyme support

The enzymatic decomposition of 4-chlorophenol metabolites using an immobilized biocatalyst was investigated in this study. Catechol 1,2-dioxygenase for ortho ring cleavage obtained via cloning of the corresponding gene cphA-I from Arthrobacter chlorophenolicus A6 was overexpressed and purified. It was found that the cphA-I enzyme could catalyze the degradation of catechol, 4-chlorocatechol, and 3-methylcatechol. The expressed enzyme was immobilized onto a natural enzyme support, fulvic acid-activated montmorillonite. The immobilization yield was as high as 63%, and the immobilized enzyme maintained high substrate utilization activity, with only a 15-24% reduction in the specific activity. Kinetic analysis demonstrated marginal differences in νmax and KM values for the free and immobilized enzymes, indicating that inactivation of the immobilized enzyme was minimal. The immobilized enzyme exhibited notably increased stability against changes in the surrounding environment (temperature, pH, and ionic strength). Our results provide useful information for the effective enzymatic biochemical treatment of hazardous organic compounds.