Nano-immobilization of PETase enzyme for enhanced polyethylene terephthalate biodegradation

Current state and sustainable management of waste polyethylene terephthalate bio-disposal: enzymatic degradation to upcycling

Poly (ethylene terephthalate) (PET) is a widely used plastic that leads to significant environmental pollution due to its durability. Enzymatic degradation of PET presents an eco-friendly disposal approach, with potential scalability for industrial applications. This review examines key crucial factors influencing PET enzymatic degradation, including the catalytic efficiency of PET hydrolase, production scalability of PET hydrolase, and recyclability of degraded PET. We outline major advancements in PET hydrolase development, including discovery techniques, functional enhancement strategies, and degradation optimization. Additionally, it assesses the preparation methodologies for PET hydrolase, covering bacterial expression systems, high-density fermentation technologies, and approaches for sustainable catalytic use. The review also discusses upcycling processes for PET hydrolysates, focusing on repolymerization into new plastics or bioconversion into valuable chemicals. Successful achievement of waste PET bio-disposal in industrial-scale n hinges on balancing degradation costs with revenue from upcycling products. Aim at this target, the review further points out the critical challenges, and proposes targeted solutions and expectations.

Exploring biotechnology for plastic recycling, degradation and upcycling for a sustainable future

The persistent demand for plastic commodities, inadequate recycling infrastructure, and pervasive environmental contamination due to plastic waste present a formidable global challenge. Recycling, degradation and upcycling are the three most important ways to solve the problem of plastic pollution. Sequential enzymatic and microbial degradation of mechanically and chemically pre-treated plastic waste can be orchestrated, followed by microbial conversion into value-added chemicals and polymers through mixed culture systems. Furthermore, plastics-degrading enzymes can be optimized through protein engineering to enhance their specific binding capacities, stability, and catalytic efficiency across a broad spectrum of polymer substrates under challenging high salinity and temperature conditions. Also, the production and formulation of enzyme mixtures can be fine-tuned to suit specific waste compositions, facilitating their effective deployment both in vitro, in vivo and in combination with chemical technologies. Here, we emphasized the comprehensive strategy leveraging microbial processes to transform mixed plastics of fossil-derived polymers such as PP, PE, PU, PET, and PS, most notably polyesters, in conjunction with potential biodegradable alternatives such as PLA and PHA. Any residual material resistant to enzymatic degradation can be reintroduced into the process loop following appropriate physicochemical treatment.

High-Efficiency PET Degradation With a Duo-Enzyme System Immobilized on Magnetic Nanoparticles

The widespread consumption of PET worldwide has necessitated the search for environment-friendly methods for PET degradation and recycling. Among these methods, biodegradation stands out as a promising approach for recycling PET. The discovery of duo enzyme system PETase and MHETase in 2016, along with their engineered variants, has demonstrated significant potential in breaking down PET. Previous studies have also demonstrated that the activity of the enzyme PETase increases when it is immobilized on nanoparticles. To achieve highly efficient and complete PET depolymerization, we immobilized both FAST-PETase and MHETase at a specific ratio on magnetic nanoparticles. This immobilization resulted in a 2.5-fold increase in product release compared with free enzymes. Additionally, we achieved reusability and enhanced stability of the enzyme bioconjugates.

Functionalization of amylopectin as a strategy to improve polyethylene terephthalate hydrolase-cross-linked enzyme aggregate (IsPETase-CLEA) in plastic degradation

Polyethylene terephthalate hydrolase-cross-linked enzyme aggregate cross-linked with amylopectin (IsPETase/Amy) was developed and successfully degraded polyethylene terephthalate (PET). However, the low enzyme efficiency of IsPETase/Amy may hamper its industrial application. Hence, the goal of this study is to improve the enzyme efficiency of IsPETase-CLEAs by using novel dialdehyde amylopectin (DAA) from maize as cross-linker. DAA with aldehyde content of 64.3 % was synthesized and used to cross-link IsPETase as IsPETase/DAA. Under best immobilization condition, the activity recovery achieved was 74.3 %. Furthermore, IsPETase/DAA achieved 3.0-, 2.63-, 1.72- and 2.4-fold better thermal stability compared to IsPETase/Amy at 35 °C, 40 °C, 45 °C and 50 °C respectively. Moreover, better pH stability (pH 5-10) was achieved by IsPETase/DAA, and the reusability was enhanced to 7 cycles. Besides, enzyme efficiency of IsPETase/DAA successfully improved 7-fold better than IsPETase/Amy. It was revealed that IsPETase/DAA exhibited better PET degradation that the MHET yield was 66.2 % and 28 % higher than free IsPETase and IsPETase/Amy respectively. Therefore, this study developed a new promising green biocatalyst in PET degradation to be applied in industry.

A Self-Assembled Amino Acid Hydrogel for Immobilization and Protection of Enzymes

Enzymes are essential biological catalysts, which have merits such as specificity, high efficiency, and mild-acting conditions. Due to the characteristics of enzymes, problems such as poor operational stability and difficulty in reuse limit the practical application of enzymes. These problems can often be solved by immobilization of enzymes. Commonly used enzyme immobilization materials include biochar, chitosan, polymer, and metal-organic frameworks, which often do not match the nature of the enzyme. This study utilizes the self-assembled amino acid hydrogel Fmoc-Y-OMe as the immobilizing material. The hydrogelator Fomc-Y-OMe has advantages like simple synthesis, easy immobilization, environmental friendliness, and good compatibility with proteins. It is able to protect enzyme activity at high temperatures and under a wide range of acid-base conditions and has excellent versatility. In particular, immobilized polyethylene terephthalate degrading enzyme (PETase) can significantly degrade polyethylene terephthalate (PET) film at 70 °C, while free PETase completely loses its catalytic capacity at such high temperatures. The excellent performance of self-assembled hydrogels to protect the catalytic activity of enzymes at high temperatures is highlighted.

Recent advances in recycling and upcycling of hazardous plastic waste: A review

Plastic is a widely used material across various industries, including construction, packaging, healthcare, and automotive, among others. Global plastic production was estimated at 311 million tonnes in 2014 and is expected to double within two decades, continuing to rise towards 2050. As plastic pollution poses significant environmental and health risks, effective recycling and upcycling strategies are crucial for sustainable waste management. This paper explores the impact of plastic waste on public health and ecosystems, reviews chemical, mechanical, and biological recycling methods, and examines upcycling approaches. It also addresses key challenges such as limitations in chemical upcycling, scaling up carbonization, and inefficiencies in sorting and processing for mechanical recycling. Additionally, recent innovations-including enzymatic depolymerization for PET recycling, upcycling plastic waste into advanced carbon materials like graphene and carbon nanotubes, photochemical and photocatalytic upcycling, PVC recycling via Cl-transfer systems, and advancements in mechanical recycling for multi-layer plastics-are discussed to highlight emerging solutions in plastic waste management. By addressing these challenges and gaps, this paper provides valuable insights into advancing plastic waste management through innovative recycling and upcycling technologies, paving the way for more sustainable and environmentally friendly solutions to combat global plastic pollution.

Toward a Circular Economy of Heteroatom Containing Plastics: A Focus on Heterogeneous Catalysis in Recycling

Plastics play a vital role in modern society, but their accumulation in landfills and the environment presents significant risks to ecosystems and human health. In addition, the discarding of plastic waste constitutes to a loss of valuable material. While the usual mechanical recycling method often results in reduced material quality, chemical recycling offers exciting opportunities to valorize plastic waste into compounds of interest. Its versatility leans on the broad horizon of chemical reactions applicable, such as hydrogenolysis, hydrolysis, alcoholysis, or aminolysis. The development of heterogeneous and supported organocatalysts has enormous potential to enhance the economic and industrial viability of these technologies, reducing the cost of the process and mitigating its global environmental impact. This review summarizes the challenges and opportunities of chemically recycling heteroatom-containing plastics through heterogeneous catalysis, covering widely used plastics such as polyesters (notably PET and PLA), BPA-polycarbonate (BPA-PC), polyurethane (PU), polyamide (PA), and polyether. It examines the potential and limitations of various solid catalysts, including clays, zeolites, and metal-organic frameworks as well as supported organocatalysts and immobilized enzymes (heterogeneous biocatalysts), for reactions that facilitate the recovery of high-value products. By reintroducing these high-value products into the economy as precursors, this approach supports a more sustainable lifecycle for plastics, aligning with the principles of a circular economy.

Magnetic silica-coated cutinase immobilized via ELPs biomimetic mineralization for efficient nano-PET degradation

The proliferation of nano-plastic particles (NPs) poses severe environmental hazards, urgently requiring effective biodegradation methods. Herein, a novel method was developed for degrading nano-PET (polyethylene terephthalate) using immobilized cutinases. Nano-PET particles were prepared using a straightforward method, and biocompatible elastin-like polypeptide-magnetic nanoparticles (ELPs-MNPs) were obtained as magnetic cores via biomimetic mineralization. Using one-pot synthesis with the cost-effective precursor tetraethoxysilane (TEOS), silica-coated magnetically immobilized ELPs-tagged cutinase (ET-C@SiO2@MNPs) were produced. ET-C@SiO2@MNPs showed rapid magnetic separation within 30 s, simplifying recovery and reuse. ET-C@SiO2@MNPs retained 86 % of their initial activity after 11 cycles and exhibited superior hydrolytic capabilities for nano-PET, producing 0.515 mM TPA after 2 h of hydrolysis, which was 96.6 % that of free enzymes. Leveraging ELPs biomimetic mineralization, this approach offers a sustainable and eco-friendly solution for PET-nanoplastic degradation, highlighting the potential of ET-C@SiO2@MNPs in effective nanoplastic waste management and contributing to environmental protection and sustainable development.

Omic-driven strategies to unveil microbiome potential for biodegradation of plastics: a review

Plastic waste accumulation has lately been identified as the leading and pervasive environmental concern, harming all living beings, natural habitats, and the global market. Given this issue, developing ecologically friendly solutions, such as biodegradation instead of standard disposal, is critical. To effectively address and develop better strategies, it is critical to understand the inter-relationship between microorganisms and plastic, the role of genes and enzymes involved in this process. However, the complex nature of microbial communities and the diverse mechanisms involved in plastic biodegradation have hindered the development of efficient plastic waste degradation strategies. Omics-driven approaches, encompassing genomics, transcriptomics and proteomics have revolutionized our understanding of microbial ecology and biotechnology. Therefore, this review explores the application of omics technologies in plastic degradation studies and discusses the key findings, challenges, and future prospects of omics-based approaches in identifying novel plastic-degrading microorganisms, enzymes, and metabolic pathways. The integration of omics technologies with advanced molecular technologies such as the recombinant DNA technology and synthetic biology would guide in the optimization of microbial consortia and engineering the microbial systems for enhanced plastic biodegradation under various environmental conditions.

Microbial Immobilized Enzyme Biocatalysts for Multipollutant Mitigation: Harnessing Nature's Toolkit for Environmental Sustainability

The ever-increasing presence of micropollutants necessitates the development of environmentally friendly bioremediation strategies. Inspired by the remarkable versatility and potent catalytic activities of microbial enzymes, researchers are exploring their application as biocatalysts for innovative environmental cleanup solutions. Microbial enzymes offer remarkable substrate specificity, biodegradability, and the capacity to degrade a wide array of pollutants, positioning them as powerful tools for bioremediation. However, practical applications are often hindered by limitations in enzyme stability and reusability. Enzyme immobilization techniques have emerged as transformative strategies, enhancing enzyme stability and reusability by anchoring them onto inert or activated supports. These improvements lead to more efficient pollutant degradation and cost-effective bioremediation processes. This review delves into the diverse immobilization methods, showcasing their success in degrading various environmental pollutants, including pharmaceuticals, dyes, pesticides, microplastics, and industrial chemicals. By highlighting the transformative potential of microbial immobilized enzyme biocatalysts, this review underscores their significance in achieving a cleaner and more sustainable future through the mitigation of micropollutant contamination. Additionally, future research directions in areas such as enzyme engineering and machine learning hold immense promise for further broadening the capabilities and optimizing the applications of immobilized enzymes in environmental cleanup.

Micro and nanoplastics pollution: Sources, distribution, uptake in plants, toxicological effects, and innovative remediation strategies for environmental sustainability

Microplastics and nanoplastics (MNPs), are minute particles resulting from plastic fragmentation, have raised concerns due to their widespread presence in the environment. This study investigates sources and distribution of MNPs and their impact on plants, elucidating the intricate mechanisms of toxicity. Through a comprehensive analysis, it reveals that these tiny plastic particles infiltrate plant tissues, disrupting vital physiological processes. Micro and nanoplastics impair root development, hinder water and nutrient uptake, photosynthesis, and induce oxidative stress and cyto-genotoxicity leading to stunted growth and diminished crop yields. Moreover, they interfere with plant-microbe interactions essential for nutrient cycling and soil health. The research also explores the translocation of these particles within plants, raising concerns about their potential entry into the food chain and subsequent human health risks. The study underscores the urgency of understanding MNPs toxicity on plants, emphasizing the need for innovative remediation strategies such as bioremediation by algae, fungi, bacteria, and plants and eco-friendly plastic alternatives. Addressing this issue is pivotal not only for environmental conservation but also for ensuring sustainable agriculture and global food security in the face of escalating plastic pollution.

Simulation Study of Polyethylene Terephthalate Hydrolase Adsorption on Self-Assembled Monolayers

Polyethylene terephthalate (PET) hydrolase, discovered in Ideonella sakaiensis (IsPETase), is a promising agent for the biodegradation of PET under mild reaction conditions, yet the thermal stability is poor. The efficient immobilization and orientation of IsPETase on different solid substrates are essential for its application. In this work, the combined parallel tempering Monte Carlo simulation with the all-atom molecular dynamics simulation approach was adopted to reveal the adsorption mechanism, orientation, and conformational changes of IsPETase adsorbed on charged self-assembled monolayers (SAMs), including COOH-SAM and NH2-SAM with different surface charge densities (SCDs). The results show that the protein adsorption orientation was determined not only by attraction interactions but also by repulsion interactions. IsPETase is adsorbed on the COOH-SAM surface with an "end-on" orientation, which favors the exposure of the catalyzed triplet to the solution. In addition, the entrance to the catalytic active center is larger on the COOH-SAM surface with a low SCD. This work reveals the controlled orientation and conformational information on IsPETase on charged surfaces at the atomistic level. This study would certainly promote our understanding of the mechanism of IsPETase adsorption and provide theoretical support for the design of substrates for IsPETase immobilization.

Cross-linked enzyme aggregates of polyethylene terephthalate hydrolyse (PETase) from Ideonella sakaiensis for the improvement of plastic degradation

Polyethylene terephthalate (PET) is one of the most produced plastics globally and its accumulation in the environment causes harm to the ecosystem. Polyethylene terephthalate hydrolyse (PETase) is an enzyme that can degrade PET into its monomers. However, free PETase lacks operational stabilities and is not reusable. In this study, development of cross-linked enzyme aggregate (CLEA) of PETase using amylopectin (Amy) as cross-linker was introduced to solve the limitations of free PETase. PETase-Amy-CLEA exhibited activity recovery of 81.9 % at its best immobilization condition. Furthermore, PETase-Amy-CLEA exhibited 1.37-, 2.75-, 2.28- and 1.36-fold higher half-lives than free PETase at 50 °C, 45 °C, 40 °C and 35 °C respectively. Moreover, PETase-Amy-CLEA showed broader pH stability from pH 5 to 10 and could be reused up to 5 cycles. PETase-Amy-CLEA retained >70 % of initial activity after 40 days of storage at 4 °C. In addition, lower Km of PETase-Amy-CLEA indicated better substrate affinity than free enzyme. PETase-Amy-CLEA corroded PET better and products yielded was 66.7 % higher than free PETase after 32 h of treatment. Hence, the enhanced operational stabilities, storage stability, reusability and plastic degradation ability are believed to make PETase-Amy-CLEA a promising biocatalyst in plastic degradation.

Characterization and engineering of plastic-degrading polyesterases jmPE13 and jmPE14 from Pseudomonas bacterium

Polyester plastics are widely used in daily life, but also cause a large amount of waste. Degradation by microbial enzymes is the most promising way for the biobased upcycling of the wastes. However, there is still a shortage of high-performance enzymes, and more efficient polyester hydrolases need to be developed. Here we identified two polyester hydrolases, jmPE13 and jmPE14, from a previously isolated strain Pseudomonas sp. JM16B3. The proteins were recombinantly expressed and purified in E. coli, and their enzymatic properties were characterized. JmPE13 and jmPE14 showed hydrolytic activity towards polyethylene terephthalate (PET) and Poly (butylene adipate-co-terephthalate) (PBAT) at medium temperatures. The enzyme activity and stability of jmPE13 were further improved to 3- and 1.5-fold, respectively, by rational design. The results of our research can be helpful for further engineering of more efficient polyester plastic hydrolases and their industrial applications.

Direct purification and immobilization of his-tagged enzymes using unmodified nickel ferrite NiFe2O4 magnetic nanoparticles

Purification of valuable engineered proteins and enzymes can be laborious, costly, and generating large amount of chemical waste. Whilst enzyme immobilization can enhance recycling and reuse of enzymes, conventional methods for immobilizing engineered enzymes from purified samples are also inefficient with multiple-step protocols, regarding both the carrier preparation and enzyme binding. Nickel ferrite magnetic nanoparticles (NiFe2O4 MNPs) offer distinct advantages in both purification and immobilization of enzymes. In this work, we demonstrate the preparation of NiFe2O4 MNPs via a one-step solvothermal synthesis and their use in direct enzyme binding from cell lysates. These NiFe2O4 MNPs have showed an average diameter of 8.9 ± 1.7 nm from TEM analysis and a magnetization at saturation (Ms) value of 53.0 emu g-1 from SQUID measurement. The nickel binding sites of the MNP surface allow direct binding of three his-tagged enzymes, D-phenylglycine aminotransferase (D-PhgAT), Halomonas elongata ω-transaminase (HeωT), and glucose dehydrogenase from Bacillus subtilis (BsGDH). It was found that the enzymatic activities of all immobilized samples directly prepared from cell lysates were comparable to those prepared from the conventional immobilization method using purified enzymes. Remarkably, D-PhgAT supported on NiFe2O4 MNPs also showed similar activity to the purified free enzyme. By comparing on both carrier preparation and enzyme immobilization protocols, use of NiFe2O4 MNPs for direct enzyme immobilization from cell lysate can significantly reduce the number of steps, time, and use of chemicals. Therefore, NiFe2O4 MNPs can offer considerable advantages for use in both enzyme immobilization and protein purification in pharmaceutical and other chemical industries.

Harnessing extremophilic carboxylesterases for applications in polyester depolymerisation and plastic waste recycling

The steady growth in industrial production of synthetic plastics and their limited recycling have resulted in severe environmental pollution and contribute to global warming and oil depletion. Currently, there is an urgent need to develop efficient plastic recycling technologies to prevent further environmental pollution and recover chemical feedstocks for polymer re-synthesis and upcycling in a circular economy. Enzymatic depolymerization of synthetic polyesters by microbial carboxylesterases provides an attractive addition to existing mechanical and chemical recycling technologies due to enzyme specificity, low energy consumption, and mild reaction conditions. Carboxylesterases constitute a diverse group of serine-dependent hydrolases catalysing the cleavage and formation of ester bonds. However, the stability and hydrolytic activity of identified natural esterases towards synthetic polyesters are usually insufficient for applications in industrial polyester recycling. This necessitates further efforts on the discovery of robust enzymes, as well as protein engineering of natural enzymes for enhanced activity and stability. In this essay, we discuss the current knowledge of microbial carboxylesterases that degrade polyesters (polyesterases) with focus on polyethylene terephthalate (PET), which is one of the five major synthetic polymers. Then, we briefly review the recent progress in the discovery and protein engineering of microbial polyesterases, as well as developing enzyme cocktails and secreted protein expression for applications in the depolymerisation of polyester blends and mixed plastics. Future research aimed at the discovery of novel polyesterases from extreme environments and protein engineering for improved performance will aid developing efficient polyester recycling technologies for the circular plastics economy.

Recent advances in biodegradation of emerging contaminants - microplastics (MPs): Feasibility, mechanism, and future prospects

Plastics have become an essential part of life. When it enters the environment, it migrates and breaks down to form smaller size fragments, which are called microplastics (MPs). Compared with plastics, MPs are detrimental to the environment and pose a severe threat to human health. Bioremediation is being recognized as the most environmentally friendly and cost-effective degradation technology for MPs, but knowledge about the biodegradation of MPs is limited. This review explores the various sources of MPs and their migration behavior in terrestrial and aquatic environments. Among the existing MPs removal technologies, biodegradation is considered to be the best removal strategy to alleviate MPs pollution. The biodegradation potential of MPs by bacteria, fungi and algae is discussed. Biodegradation mechanisms such as colonization, fragmentation, assimilation, and mineralization are presented. The effects of MPs characteristics, microbial activity, environmental factors and chemical reagents on biodegradation are analyzed. The susceptibility of microorganisms to MPs toxicity might lead to decreased degradation efficiency, which is also elaborated. The prospects and challenges of biodegradation technologies are discussed. Eliminating prospective bottlenecks is necessary to achieve large-scale bioremediation of MPs-polluted environment. This review provides a comprehensive summary of the biodegradability of MPs, which is crucial for the prudent management of plastic waste.

Global plastic upcycling during and after the COVID-19 pandemic: The status and perspective

Plastic pollution has become one of the most pressing environmental issues worldwide since the vast majority of post-consumer plastics are hard to degrade in the environment. The coronavirus disease (COVID-19) pandemic had disrupted the previous effort of plastic pollution mitigation to a great extent due to the overflow of plastic-based medical waste. In the post-pandemic era, the remaining challenge is how to motivate global action towards a plastic circular economy. The need for one package of sustainable and systematic plastic upcycling approaches has never been greater to address such a challenge. In this review, we summarized the threat of plastic pollution during COVID-19 to public health and ecosystem. In order to solve the aforementioned challenges, we present a shifting concept, regeneration value from plastic waste, that provides four promising pathways to achieve a sustainable circular economy: 1) Increasing reusability and biodegradability of plastics; 2) Transforming plastic waste into high-value products by chemical approaches; 3) The closed-loop recycling can be promoted by biodegradation; 4) Involving renewable energy into plastic upcycling. Additionally, the joint efforts from different social perspectives are also encouraged to create the necessary economic and environmental impetus for a circular economy.

Receptor-based detection of microplastics and nanoplastics: Current and future

Plastic pollution is an emerging environmental concern, gaining significant attention worldwide. They are classified into microplastics (MP; defined from 1 μm to 5 mm) and smaller nanoplastics (NP; <1 μm). NPs may pose higher ecological risks than MPs. Various microscopic and spectroscopic techniques have been used to detect MPs, and the same methods have occasionally been used for NPs. However, they are not based on receptors, which provide high specificity in most biosensing applications. Receptor-based micro/nanoplastics (MNP) detection can provide high specificity, distinguishing MNPs from the environmental samples and, more importantly, identifying the plastic types. It can also offer a low limit of detection (LOD) required for environmental screening. Such receptors are expected to detect NPs specifically at the molecular level. This review categorizes the receptors into cells, proteins, peptides, fluorescent dyes, polymers, and micro/nanostructures. Detection techniques used with these receptors are also summarized and categorized. There is plenty of room for future research to test for broader classes of environmental samples and many plastic types, to lower the LOD, and to apply the current techniques for NPs. Portable and handheld MNP detection should also be demonstrated for field use since the current demonstrations primarily utilized laboratory instruments. Detection on microfluidic platforms will also be crucial in miniaturizing and automating the assay and, eventually, collecting an extensive database to support machine learning-based classification of MNP types.

Energetic and Structural Characterizations of the PET-Water Interface as a Key Step in Understanding Its Depolymerization

We report molecular simulations of the interaction between poly(ethylene terephthalate) (PET) surfaces and water molecules with a short-term goal to better evaluate the different energy contributions governing the enzymatic degradation of amorphous PET. After checking that the glass transition temperature, density, entanglement mass, and mechanical properties of an amorphous PET are well reproduced by our molecular model, we extend the study to the extraction of a monomer from the bulk surface in different environments, i.e., water, vacuum, dodecane, and ethylene glycol. We complete this energetic characterization by the calculation of the work of adhesion of PET surfaces with water and dodecane molecules and by the determination of the contact angle of water droplets. These calculations are compared with experiments and should help us to better understand the enzymatic degradation of PET from both the thermodynamic and molecular viewpoints.

Ancestral Sequence Reconstruction Identifies Structural Changes Underlying the Evolution of Ideonella sakaiensis PETase and Variants with Improved Stability and Activity

The improved production, recycling, and removal of plastic waste, such as polyethylene terephthalate (PET), are pressing environmental and economic issues for society. Biocatalytic (enzymatic) PET depolymerization is potentially a sustainable, low-energy solution to PET recycling, especially when compared with current disposal methods such as landfills, incineration, or gasification. IsPETase has been extensively studied for its use in PET depolymerization; however, its evolution from cutinases is not fully understood, and most engineering studies have neglected the majority of the available sequence space remote from the active site. In this study, ancestral protein reconstruction (ASR) has been used to trace the evolutionary trajectory from ancient serine hydrolases to IsPETase, while ASR and the related design approach, protein repair one-stop shop, were used to identify enzyme variants with improved activity and stability. Kinetic and structural characterization of these variants reveals new insights into the evolution of PETase activity and the role of second-shell mutations around the active site. Among the designed and reconstructed variants, we identified several with melting points 20 °C higher than that of IsPETase and two variants with significantly higher catalytic activity.

A versatile tag for simple preparation of cutinase towards enhanced biodegradation of polyethylene terephthalate

Enzymatic degradation of polyethylene terephthalate (PET) suffered from challenges such as complex and costly enzyme preparation, difficult access to PET substrates, poor reusability of free enzymes and sometimes MHET inhibitions. Herein, we propose an "all-in-one" strategy to address these issues with a well-designed elastin-like polypeptides (ELPs) tag. The preparation of the ELPs-tagged cutinase (ET-C) was efficient and easy to scale up by centrifugation, with an activity recovery of 57.55 % and a yield of 160 mg/L. Besides, the activity of the ET-C was 1.3 and 1.66-fold higher in degrading PET micro- and macro-plastics compared to wild-type cutinase. The self-immobilized cutinase (ET-C@SiO₂) obtained by the ELPs-mediated biosilicification exhibited high loading capacity, activity, and thermostability and maintained 77.65 % of the original activity after 10 reuses. Interestingly, the product of the ET-C was TPA, whereas the wild-type was TPA and MHET. This is a simple way to release the intermediates inhibition compared with the existing methods. Our results demonstrated the feasibility of the versatile ELPs tag, which will pave an alternative economic way for scalable PET biodegradation.

Development of multifarious carrier materials and impact conditions of immobilised microbial technology for environmental remediation: A review

Microbial technology is the most sustainable and eco-friendly method of environmental remediation. Immobilised microorganisms were introduced to further advance microbial technology. In immobilisation technology, carrier materials distribute a large number of microorganisms evenly on their surface or inside and protect them from external interference to better treat the targets, thus effectively improving their bioavailability. Although many carrier materials have been developed, there have been relatively few comprehensive reviews. Therefore, this paper summarises the types of carrier materials explored in the last ten years from the perspective of structure, microbial activity, and cost. Among these, carbon materials and biofilms, as environmentally friendly functional materials, have been widely applied for immobilisation because of their abundant sources and favorable growth conditions for microorganisms. The novel covalent organic framework (COF) could also be a new immobilisation material, due to its easy preparation and high performance. Different immobilisation methods were used to determine the relationship between carriers and microorganisms. Co-immobilisation is particularly important because it can compensate for the deficiencies of a single immobilisation method. This paper emphasises that impact conditions also affect the immobilisation effect and function. In addition to temperature and pH, the media conditions during the preparation and reaction of materials also play a role. Additionally, this study mainly reviews the applications and mechanisms of immobilised microorganisms in environmental remediation. Future development of immobilisation technology should focus on the discovery of novel and environmentally friendly carrier materials, as well as the establishment of optimal immobilisation conditions for microorganisms. This review intends to provide references for the development of immobilisation technology in environmental applications and to further the improve understanding of immobilisation technology.

Directed Immobilization of PETase on Mesoporous Silica Enables Sustained Depolymerase Activity in Synthetic Wastewater Conditions

Microplastic accumulation in terrestrial and aquatic environments is a growing environmental challenge. Biodegradation has shown promise as an intervention strategy for reducing the spread of microplastics. The wastewater treatment system is a key intervention point in microplastic biodegradation due to its pivotal role in the water cycle at the interface between human activity and the environmental. However, the best characterized microplastic degradation enzyme, PETase, lacks the stability to perform at scale in wastewater treatment. In this work, we show that genetic fusion of PETase to a silica binding peptide enables directed immobilization of the enzyme onto silica nanoparticles. PETase activity in simulated wastewater conditions is quantified by linear regression from time zero to the time of maximum fluorescence of a fluorescent oxidized product of PETase degradation of PET microfibers. Mesoporous silica is shown to be a superior support material to nonporous silica. The resulting biocatalytic nanomaterial has up to 2.5-fold enhanced stability and 6.2-fold increased activity compared to free enzyme in unbuffered, 40 °C simulated influent (ionic strength ∼15 mM). In unbuffered, 40 °C simulated effluent (ionic strength ∼700 μM), reaction velocity and overall catalytic activity were increased by the biocatalytic material 2.1-fold relative to free PETase. All reactions were performed in 0.2 mL volumes, and enzyme concentrations were normalized across both free and immobilized samples to 9 μg/mL. Site-directed mutagenesis is shown to be a complementary technique to directed immobilization, which may aid in optimization of the biomaterial for wastewater applications. PETase stabilization in application-relevant environments as shown here enables progress toward application of PETase for microplastic biodegradation in wastewater treatment.

The application of bioremediation in wastewater treatment plants for microplastics removal: a practical perspective

Wastewater treatment plants (WWTPs) play the role of intercepting microplastics in the environment and provide a platform for bioremediation to remove microplastics. Despite, this opportunity has not been adequately studied. This paper shows the potential ways microplastics-targeted bioremediation could be incorporated into wastewater treatment through the review of relevant literature on bioaugmentation of water treatment processes for pollutants removal. Having reviewed more than 90 papers in this area, it highlights that bioremediation in WWTPs can be employed through bioaugmentation of secondary biological treatment systems, particularly the aerobic conventional activated sludge, sequencing batch reactor, membrane bioreactor and rotating biological contactor. The efficiency of microplastics removal, however, is influenced by the types and forms of microorganisms used, the polymer types and the incubation time (100% for polycaprolactone with Streptomyces thermoviolaceus and 0.76% for low-density polyethylene with Acinetobacter iwoffii). Bioaugmentation of anaerobic system, though possible, is constrained by comparatively less anaerobic microplastics-degrading microorganisms identified. In tertiary system, bioremediation through biological activated carbon and biological aerated filter can be accomplished and enzymatic membrane reactor can be added to the system for deployment of biocatalysts. During sludge treatment, bioaugmentation and addition of enzymes to composting and anaerobic digestion are potential ways to enhance microplastics breakdown. Limitations of bioremediation in wastewater treatment include longer degradation time of microplastics, incomplete biodegradation, variable efficiency, specific microbial activities and uncertainty in colonization. This paper provides important insight into the practical applications of bioremediation in wastewater treatment for microplastics removal.

Hydrophobic cell surface display system of PETase as a sustainable biocatalyst for PET degradation

Remarkably, a hydrolase from Ideonella sakaiensis 201-F6, termed PETase, exhibits great potential in polyethylene terephthalate (PET) waste management due to it can efficiently degrade PET under moderate conditions. However, its low yield and poor accessibility to bulky substrates hamper its further industrial application. Herein a multigene fusion strategy is introduced for constructing a hydrophobic cell surface display (HCSD) system in Escherichia coli as a robust, recyclable, and sustainable whole-cell catalyst. The truncated outer membrane hybrid protein FadL exposed the PETase and hydrophobic protein HFBII on the surface of E. coli with efficient PET accessibility and degradation performance. E. coli containing the HCSD system changed the surface tension of the bacterial solution, resulting in a smaller contact angle (83.9 ± 2° vs. 58.5 ± 1°) of the system on the PET surface, thus giving a better opportunity for PETase to interact with PET. Furthermore, pretreatment of PET with HCSD showed rougher surfaces with greater hydrophilicity (water contact angle of 68.4 ± 1° vs. 106.1 ± 2°) than the non-pretreated ones. Moreover, the HCSD system showed excellent sustainable degradation performance for PET bottles with a higher degradation rate than free PETase. The HCSD degradation system also had excellent stability, maintaining 73% of its initial activity after 7 days of incubation at 40°C and retaining 70% activity after seven cycles. This study indicates that the HCSD system could be used as a novel catalyst for efficiently accelerating PET biodegradation.

Sequentially co-immobilized PET and MHET hydrolases via Spy chemistry in calcium phosphate nanocrystals present high-performance PET degradation

Accumulation of polyethylene terephthalate (PET) has brought an enormous threat to the ecosystem. The recently reported PET hydrolase (DuraPETase) and MHET hydrolase (MHETase) can synergistically catalyze the complete PET degradation. Hence, this work was designed to develop a bienzymatic cascade catalysis by co-immobilizing the two enzymes for PET biodegradation. DuraPETase and MHETase were sequentially co-immobilized in calcium phosphate nanocrystals (CaP) through SpyTag/SpyCatcher system. MHETase-SpyCatcher was first embedded inside the nanocrystals via biomimetic mineralization, and DuraPETase-SpyTag was then conjugated on the outlayer (~1.5 µm). The bienzyme compartmentalization facilitated DuraPETase interaction with the solid substrate, and the layered structures of the nanocrystals protected the enzymes, thus enhancing their stability. The high specific surface area of the nanocrystals and the proximity effects from the bienzymatic cascade were beneficial to the improved enzyme activity. Experimental data and molecular dynamics simulations revealed the activation effect of Ca²⁺ on DuraPETase. Taken together, the final results indicate that the PET degradation efficiency of DuraPETase-MHETase@CaP increased by 6.1 and 1.5 times over the free bienzyme system within 10 d at 40 °C and 50 °C, with weight losses at 32.2% and 50.3%, respectively. The bienzymatic cascade with DuraPETase-MHETase@CaP can completely degrade PET, contributing to the recycling of PET.

Immobilized enzyme/microorganism complexes for degradation of microplastics: A review of recent advances, feasibility and future prospects

Environmental prevalence of microplastics has prompted the development of novel methods for their removal, one of which involves immobilization of microplastics-degrading enzymes. Various materials including nanomaterials have been studied for this purpose but there is currently a lack of review to present these studies in an organized manner to highlight the advances and feasibility. This article reviewed more than 100 peer-reviewed scholarly papers to elucidate the latest advances in the novel application of immobilized enzyme/microorganism complexes for microplastics degradation, its feasibility and future prospects. This review shows that metal nanoparticle-enzyme complexes improve biodegradation of microplastics in most studies through creating photogenerated radicals to facilitate polymer oxidation, accelerating growth of bacterial consortia for biodegradation, anchoring enzymes and improving their stability, and absorbing water for hydrolysis. In a study, the antimicrobial property of nanoparticles retarded the growth of microorganisms, hence biodegradation. Carbon particle-enzyme complexes enable enzymes to be immobilized on carbon-based support or matrix through covalent bonding, adsorption, entrapment, encapsulation, and a combination of the mechanisms, facilitated by formation of cross-links between enzymes. These complexes were shown to improve microplastics-degrading efficiency and recyclability of enzymes. Other emerging nanoparticles and/or enzymatic technologies are fusion of enzymes with hydrophobins, polymer binding module, peptide and novel nanoparticles. Nonetheless, the enzymes in the complexes present a limiting factor due to limited understanding of the degradation mechanisms. Besides, there is a lack of studies on the degradation of polypropylene and polyvinyl chloride. Genetic bioengineering and metagenomics could provide breakthrough in this area. This review highlights the optimism of using immobilized enzymes/microorganisms to increase the efficiency of microplastics degradation but optimization of enzymatic or microbial activities and synthesis of immobilized enzymes/microorganisms are crucial to overcome the barriers to their wide application.

Current Knowledge on Polyethylene Terephthalate Degradation by Genetically Modified Microorganisms

The global production of polyethylene terephthalate (PET) is estimated to reach 87.16 million metric tons by 2022. After a single use, a remarkable part of PET is accumulated in the natural environment as plastic waste. Due to high hydrophobicity and high molecular weight, PET is hardly biodegraded by wild-type microorganisms. To solve the global problem of uncontrolled pollution by PET, the degradation of plastic by genetically modified microorganisms has become a promising alternative for the plastic circular economy. In recent years many studies have been conducted to improve the microbial capacity for PET degradation. In this review, we summarize the current knowledge about metabolic engineering of microorganisms and protein engineering for increased biodegradation of PET. The focus is on mutations introduced to the enzymes of the hydrolase class-PETase, MHETase and cutinase-which in the last few years have attracted growing interest for the PET degradation processes. The modifications described in this work summarize the results obtained so far on the hydrolysis of polyethylene terephthalate based on the released degradation products of this polymer.

Fabrication of immobilized bromelain using cobalt phosphate material prepared in deep eutectic solvent as carrier

The aim of the present work is to fabricate immobilized bromelain based on the specific interaction between the cobalt ions of carrier and the inherent cysteines contained in bromelain molecules. The cobalt phosphate material was prepared as solid support by using choline chloride (ChCl)/betaine-glycerol deep eutectic solvent (DES) as solvent and template for the first time. The Co-P material with lamellate-based structure obtained in the ChCl-glycerol DES at the Co/P ratio of 3:2 showed the best performance for the immobilization of bromelain. The specific interaction between Co²⁺ and bromelain promoted the aggregation of lamellar Co-P, forming flower-like Co-P@bromelain particles. Under the optimum immobilization conditions, the specific enzyme activity of the immobilized enzyme reached the maximum of 71244 U/g. Compared with Co₃(PO₄)₂ prepared in water system, the obtained Co-P@bromelain using the Co-P material synthesized in the ChCl-glycerol DES as carrier exhibited excellent structure stability. In addition, the immobilized Co-P@bromelain also showed higher catalytic efficiency than free bromelain.