QCM-D studies of attachment and differential spreading of pre-osteoblastic cells on Ta and Cr surfaces

Combining QCM-D with live-cell imaging reveals the impact of serum proteins on the dynamics of fibroblast adhesion on tannic acid-functionalised surfaces

Nanocoatings based on plant polyphenols have been recently suggested as a potent strategy for modification of implant surfaces for enhancing host cell attachment and reducing bacterial colonisation. In this study we aimed to investigate how serum proteins impact the early adhesion dynamics of human gingival fibroblasts onto titanium surfaces coated with tannic acid (TA). Silicate-TA nanocoatings were formed on titanium and pre-conditioned in medium supplemented with 0, 0.1, 1 or 10% FBS for 1 hour. Dynamics of fibroblasts adhesion was studied using quartz crystal microbalance with dissipation (QCM-D). Time-lapse imaging was employed to assess cell area and motility, while immunofluorescence microscopy was used to examine cell morphology and focal adhesion formation. Our results showed that in serum-free medium, fibroblasts demonstrated enhanced and faster adhesion to TA coatings compared to uncoated titanium. Increasing the serum concentration reduced cell adhesion to nanocoatings, resulting in nearly complete inhibition at 10% FBS. This inhibition was not observed for uncoated titanium at 10% FBS, although cell adhesion was delayed and progressed slower compared to serum-free conditions. In addition, 1% FBS dramatically reduced cell adhesion on uncoated titanium. We revealed a positive relationship between changes in dissipation and changes in cell spreading area, and a negative relationship between dissipation and cell motility. In conclusion, our study demonstrated that serum decreases fibroblasts interaction with surfaces coated with TA in a concentration dependent manner. This suggests that controlling serum concentration can be used to regulate or potentially prevent fibroblasts adhesion onto TA-coated titanium surfaces.

Real-time monitoring of the contractile properties of H9C2 cardiomyocytes by double resonator piezoelectric cytometry

Testing the mechanical properties of cardiomyocytes plays an important role in the study of the physiological and pathological processes of constant contraction and diastole of the cardiovascular system. However, there is currently no satisfactory and dynamic technology to measure the mechanical properties of cardiomyocytes in a sustained manner, greatly affecting their practical application in clinical diagnosis and treatment evaluation. Herein, a double resonator piezoelectric cytometry (DRPC) technique was employed for dynamic monitoring of H9C2 cardiomyocyte adhesion and the effects of two cardiovascular drugs on the contractile properties of H9C2 cardiomyocytes, i.e., isoprenaline (ISO, a positive inotropic agent) and verapamil (VRP, a negative inotropic agent). Specifically, we used 9 MHz AT and BT-cut bare gold and transparent ITO electrodes and compared their dynamic adhesion to the two electrodes modified with RGD and gelatin respectively versus unmodified to measure the cell generated stress (ΔS) exerted on the quartz crystal surface by a population of cells and the cell viscoelastic index (CVI). We found that the DRPC technique can quantitatively measure the magnitude and direction of the generated forces during the adhesion process of the cells and under the effect of drugs. In conclusion, the technique presented in this study can be used for the simultaneous measurement of cell adhesion, traction force and viscoelasticity of living cells in a noninvasive, dynamic and continuous way, making it an ideal tool for assessing the population contractility of cardiomyocytes and evaluating the efficacy and toxicity of cardiovascular drugs.

Monitoring Cell Adhesion on Polycaprolactone-Chitosan Films with Varying Blend Ratios by Quartz Crystal Microbalance with Dissipation

A detailed understanding of the cell adhesion on polymeric surfaces is required to improve the performance of biomaterials. Quartz crystal microbalance with dissipation (QCM-D) as a surface-sensitive technique has the advantage of label-free and real-time monitoring of the cell-polymer interface, providing distinct signal patterns for cell-polymer interactions. In this study, QCM-D was used to monitor human fetal osteoblastic (hFOB) cell adhesion onto polycaprolactone (PCL) and chitosan (CH) homopolymer films as well as their blend films (75:25 and 25:75). Complementary cell culture assays were performed to verify the findings of QCM-D. The thin polymer films were successfully prepared by spin-coating, and relevant properties, i.e., surface morphology, ζ-potential, wettability, film swelling, and fibrinogen adsorption, were characterized. The adsorbed amount of fibrinogen decreased with an increasing percentage of chitosan in the films, which predominantly showed an inverse correlation with surface hydrophilicity. Similarly, the initial cell sedimentation after 1 h resulted in lesser cell deposition as the chitosan ratio increased in the film. Furthermore, the QCM-D signal patterns, which were measured on the homopolymer and blend films during the first 18 h of cell adhesion, also showed an influence of the different interfacial properties. Cells fully spread on pure PCL films and had elongated morphologies as monitored by fluorescence microscopy and scanning electron microscopy (SEM). Corresponding QCM-D signals showed the highest frequency drop and the highest dissipation. Blend films supported cell adhesion but with lower dissipation values than for the PCL film. This could be the result of a higher rigidity of the cell-blend interface because the cells do not pass to the next stages of spreading after secretion of their extracellular matrix (ECM) proteins. Variations in the QCM-D data, which were obtained at the blend films, could be attributed to differences in the morphology of the films. Pure chitosan films showed limited cell adhesion accompanied by low frequency drop and low dissipation.

Analytical investigation of nano-bio interfacial protein mediation for fibroblast adhesion on hydroxyapatite nanoparticles

A quartz crystal microbalance with dissipation (QCM-D) analysis was used to investigate fetal bovine serum (FBS) protein preadsorption on a hydroxyapatite (HAp) surface and the subsequent adhesion process of fibroblasts as compared with the case of oxidized poly(styrene) (PSox). The results showed that the preadsorption of FBS proteins on HAp promoted the subsequent initial cell adhesion ability. Moreover, the measured frequency (Δf) and dissipation shift (ΔD) curves, ΔD-Δf plots and viscoelastic analysis were used to study the initial cell adhesion process in real time. It was suggested that FBS-HAp showed sensitive changes in mass and viscoelasticity as compared with FBS-PSox, which realized the in situ reflection of the cell adhesion state, and the interfacial reactions between the cells and FBS-HAp surfaces such as dehydration and binding occurred to promote the initial cell adhesion and spreading. The viscoelastic analysis of the interface layer showed that the adhered cells on FBS-HAp could secrete some viscous substances such as extracellular matrix (ECM) proteins at the interfaces to provide good adhesion behaviors, and the Voigt-based viscoelastic model could clearly reveal the cellular interfacial viscoelasticity depending on the substrate surface. In addition, the morphology of cells was observed by confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM), and it was found that the pseudopodia were more uniformly stretched on FBS-HAp than on FBS-PSox. Furthermore, the state of the interfacial protein layer was analyzed by localized Fourier-transform infrared (FT-IR) spectroscopy and fluorescence microscopy (FLM), and it was indicated that the type of substrate affects the formation state of ECM proteins, resulting in changes in cell adhesion properties and morphology. The abundant formation of connective proteins (i.e., collagen type I) on FBS-HAp promoted subsequent pseudopodia formation and cell spreading. Therefore, the initial adhesion properties of fibroblasts on the FBS-HAp surface were systematically studied, which is of great importance for understanding the interfacial interaction between biomaterials and cells, and has great application value in biomedical fields.

Shear-horizontal surface acoustic wave sensor for non-invasive monitoring of dynamic cell spreading and attachment in wound healing assays

A Love-wave based biosensor is introduced for analyzing a standardized wound healing assay by observing cell growth and quantifying cell detachment processes. Utilizing the piezoelectric material LiTaO3 36° XY-cut with a thin SiO2-cover layer, shear horizontal surface acoustic waves (SAW) are excited and detected by a set of Interdigital Transducers. Epithelial cells, being cultivated on the substrate and invading the sensors delay line cause a phase shift in the transmitted SAW signal. This phase shift correlates exactly with the surface coverage of the invading cells. After wound healing, emerging fluctuations in the phase shift signal provide information about the cell growth in a confluent cell layer. Additionally, the signal slope allows to quantify the cell detachment process induced by apoptosis, necrosis or cell lysis substances, respectively. Furthermore, culture conditions like temperature or osmolality can be simultaneously monitored by SAW. Based on a theoretical approach and using FEM simulations, we identified the acoustoelectric interaction as the main reason for the phase shift in various frequency- and time-dependent studies. Our model is validated by experimental data and allows predicting the phase change caused by variations in the cell-substrate distance or the volume ratio of the nucleus and the complete cell.

Topology Challenge for the Assessment of Living Cell Deposits with Shear Bulk Acoustic Biosensor

Shear bulk acoustic type of resonant biosensors, such as the quartz crystal microbalance (QCM), give access to label-free in-liquid analysis of surface interactions. The general understanding of the sensing principles was inherited from past developments in biofilms measurements and applied to cells while keeping the same basic assumptions. Thus, the biosensor readouts are still quite often described using 'mass' related terminology. This contribution aims to show that assessment of cell deposits with acoustic biosensors requires a deep understanding of the sensor transduction mechanism. More specifically, the cell deposits should be considered as a structured viscoelastic load and the sensor response depends on both material and topological parameters of the deposits. This shifts the paradigm of acoustic biosensor away from the classical mass loading perspective. As a proof of the concept, we recorded QCM frequency shifts caused by blood platelet deposits on a collagen surface under different rheological conditions and observed the final deposit shape with atomic force microscopy (AFM). The results vividly demonstrate that the frequency shift is highly impacted by the platelet topology on the bio-interface. We support our findings with numerical simulations of viscoelastic unstructured and structured loads in liquid. Both experimental and theoretical studies underline the complexity behind the frequency shift interpretation when acoustic biosensing is used with cell deposits.

Monitoring cleaning cycles of fouled ducts using ultrasonic coda wave interferometry (CWI)

Fouling in heat exchangers is the buildup of deposits on the solid surfaces. These deposits reduce the eco-efficiency of the processing equipment and increase the risk of subsequent surface contamination with the formation of biofilms. In the agro-food and water supplier sectors, which are our main concern, fouling on the hot walls of processing heat exchangers is a common occurrence and requires frequent cleaning cycles to ensure hygiene requirements are met. This results in a considerable ecological footprint. Sensors and diagnostic tools for monitoring fouling are thus of utmost importance to ensure the rational validation of the cleaning end-point and to decrease the environmental impact of the cleaning cycles. In this paper, a non-destructive ultrasonic monitoring technique using coda waves and the associated signal processing was tested to monitor the evolution over time of a deposit layer on a solid wall during cleaning. To ascertain the feasibility of the method, a piece of wax of controlled thickness was deposited to simulate the initial fouling state and a cleaning cycle was launched. The decorrelation coefficient was used as an indicator to monitor fouling. This article presents the principle of this unprecedented technique for measuring the degree of fouling. The results of the experiments show that this non-destructive monitoring technology is sensitive to changes in fouling and that the decorrelation coefficient curves are in agreement with the cleaning kinetics captured using a video camera, thus ascertaining the pertinence of the diagnostic tool proposed.

A practical review on the measurement tools for cellular adhesion force

Cell-cell and cell-matrix adhesions are fundamental in all multicellular organisms. They play a key role in cellular growth, differentiation, pattern formation and migration. Cell-cell adhesion is substantial in the immune response, pathogen-host interactions, and tumor development. The success of tissue engineering and stem cell implantations strongly depends on the fine control of live cell adhesion on the surface of natural or biomimetic scaffolds. Therefore, the quantitative and precise measurement of the adhesion strength of living cells is critical, not only in basic research but in modern technologies, too. Several techniques have been developed or are under development to quantify cell adhesion. All of them have their pros and cons, which has to be carefully considered before the experiments and interpretation of the recorded data. Current review provides a guide to choose the appropriate technique to answer a specific biological question or to complete a biomedical test by measuring cell adhesion.

Quartz Crystal Microbalances as Tools for Probing Protein-Membrane Interactions

Extensive studies on the spontaneous collapse of phospholipid vesicles into supported lipid bilayers (SLBs) have led to procedures which allow SLB formation on a wealth of substrates and lipid compositions. SLBs provide a widely accepted and versatile model system which mimics the natural cell membrane separating the extracellular and intracellular fluids of the living cell. The quartz crystal microbalance with dissipation monitoring (QCM-D) has been central in both the understanding of vesicle collapse into SLBs on various substrates but also in probing the kinetics and mechanisms of biomolecular interactions with SLBs in real time. We describe a robust procedure to form SLBs of zwitterionic and charged lipids on SiO₂ sensor crystals which subsequently can be exploited to probe the interaction between proteins and peptides with the SLB.

Peptide-functionalized supported lipid bilayers to construct cell membrane mimicking interfaces

Supported lipid bilayers (SLB) functionalized with bioactive molecules can be effectively used to study the interaction of cells with different molecules for fundamental research or to develop biosynthetic systems for various biomedical applications. In this study, RGD and Osteocalcin mimetic (OSN) peptides were used as model molecules for functionalization of otherwise passive SLBs to evaluate cell-surface interactions via real-time monitoring in quartz crystal microbalance with dissipation. Similar platforms were also used in cell culture environment. It was seen that low density of mobile RGD peptides on SLB platforms preserved their biological activity and promoted cell adhesion more efficiently than high number of immobile, physisorbed peptides. Even though nonspecific protein and cell attachment was promoted, cells did not spread well on OSN-coated control surfaces. The stability of SLBs produced with different lipids were evaluated in various medium conditions. Enrichment with different lipids increased the stability of SLB to pure PC bilayer.

On the Measurement of Energy Dissipation of Adhered Cells with the Quartz Microbalance with Dissipation Monitoring

We previously reported the finding of a linear correlation between the change of energy dissipation (Δ D) of adhered cells measured with the quartz crystal microbalance with dissipation monitoring (QCM-D) and the level of focal adhesions of the cells. To account for this correlation, we have developed a theoretical framework for assessing the Δ D-response of adhered cells. We rationalized that the mechanical energy of an oscillating QCM-D sensor coupled with a cell monolayer is dissipated through three main processes: the interfacial friction through the dynamic restructuring (formation and rupture) of cell-extracellular matrix (ECM) bonds, the interfacial viscous damping by the liquid trapped between the QCM-D sensor and the basal membrane of the cell layer, and the intracellular viscous damping through the viscous slip between the cytoplasm and stress fibers as well as among stress fibers themselves. Our modeling study shows that the interfacial viscous damping by the trapped liquid is the primary process for energy dissipation during the early stage of the cell adhesion, whereas the dynamic restructuring of cell-ECM bonds becomes more prevalent during the later stage of the cell adhesion. Our modeling study also establishes a positive linear correlation between the Δ D-response and the level of cell adhesion quantified with the number of cell-ECM bonds, which corroborates our previous experimental finding. This correlation with a wide well-defined linear dynamic range provides a much needed theoretical validation of the dissipation monitoring function of the QCM-D as a powerful quantitative analytical tool for cell study.

Contribution of the shear wave ultrasonic reflectometry to the stickiness measurements

Today, non-invasive quantification of the adhesion of a deposit to a surface is always a challenge and, unfortunately, few tools are available in this area. This is an obstacle, in several industrial processes, to the identification of conditions limiting the fouling and to the establishment of eco-efficient cleaning strategies. In this paper, a non-invasive ultrasonic technique was developed in the aim of characterizing the adhesion of viscoelastic fluids or solid deposited on a substrate. We adopted the idea that the more a deposit is difficult to clean the more adherent it is. From this point of view the value of the reflection coefficient of an ultrasonic shear wave informs us about the adhesion of the deposit on a surface. A large bibliography on the adhesion measurement is given. Then the principle of ultrasonic test is presented and cares required for the measurement of the reflection coefficient are widely discussed. The ultrasonic reflection coefficients obtained with different controlled samples covering a wide range of interfaces (liquid/substrate, solid/substrate) are presented and compared with other indicators of adhesion. All the data on various samples showed that the ultrasonic test is a tool to discriminate non-destructively a large range of interface quality, allowing ranking according to the adhesive strength.

Detection of Acidic Pharmaceutical Compounds Using Virus-Based Molecularly Imprinted Polymers

Molecularly imprinted polymers (MIPs) have proven to be particularly effective chemical probes for the molecular recognition of proteins, DNA, and viruses. Here, we started from a filamentous bacteriophage to synthesize a multi-functionalized MIP for detecting the acidic pharmaceutic clofibric acid (CA) as a chemical pollutant. Adsorption and quartz crystal microbalance with dissipation monitoring experiments showed that the phage-functionalized MIP had a good binding affinity for CA, compared with the non-imprinted polymer and MIP. In addition, the reusability of the phage-functionalized MIP was demonstrated for at least five repeated cycles, without significant loss in the binding activity. The results indicate that the exposed amino acids of the phage, together with the polymer matrix, create functional binding cavities that provide higher affinity to acidic pharmaceutical compounds.

Hybrid Biomimetic Interfaces Integrating Supported Lipid Bilayers with Decellularized Extracellular Matrix Components

This paper describes the functionalization of solid supported phospholipid bilayer with decellularized extracellular matrix (dECM) components, toward the development of biomimetic platforms that more closely mimic the cell surface environment. The dECM was obtained through a combination of chemical and enzymatic treatments of mouse adipose tissue that contains collagen, fibronectin, and glycosaminoglycans (GAGs). Using amine coupling chemistry, the dECM components were attached covalently to the surface of a supported lipid bilayer containing phospholipids with reactive carboxylic acid headgroups. The bilayer formation and the kinetics of subsequent dECM conjugation were monitored by quartz crystal microbalance with dissipation (QCM-D). Fluorescence recovery after photobleaching (FRAP) confirmed the fluidity of the membrane after functionalization with dECM. The resulting hybrid biomimetic interface supports the attachment and survival of the human hepatocyte Huh 7.5 and maintains the representative hepatocellular function. Importantly, the platform is suitable for monitoring the lateral organization and clustering of cell-binding ligands and growth factor receptors in the presence of the rich biochemical profile of tissue-derived ECM components.

Unfound Associated Resonant Model and Its Impact on Response of a Quartz Crystal Microbalance in the Liquid Phase

Quartz crystal microbalance (QCM) is an important tool to detect in real time the mass change at the nanogram level. However, for a QCM operated in the liquid phase, the Sauerbrey equation is usually disturbed by the changes in liquid properties and the longitudinal wave effect. Herein, we report another unfound associated high-frequency resonance (HFR) model for the QCM, with the intensity 2 orders of magnitude higher than that of the fundamental peak in the liquid phase. The HFR model exhibits obvious impact on the response of QCM in the thickness-shear model (TSM), especially for overtones. The frequency of HFR peak is decreased dramatically with increasing conductivity or permittivity of the liquid phase, resulting in considerable additional frequency shifts in the TSM as baseline drift. Compared to that with a faraway HFR peak, the overlapping of HFR peak to a TSM overtone results in the frequency shifts of ±50-70 kHz with its intensity enhancement by 3 orders of magnitude in the later. The HFR behavior is explained by an equivalent circuit model including leading wire inductance, liquid inductance, and static capacitance of QCM. Taking into account the HFR model, the positive frequency shifts of the QCM at high overtones during the cell adhesion process is understandable. Combining the TSM and HFR is an effective way to improve the stability of QCM and provides more reliable information from the responses of QCM. The HFR may have potential application in chemical and biological sensors.

Immobilization of Aluminum Hydroxide Particles on Quartz Crystal Microbalance Sensors to Elucidate Antigen-Adjuvant Interaction Mechanisms in Vaccines

Aluminum hydroxide (AH) salts are the most widely used adjuvants in vaccine formulation. They trigger immunogenicity from antigenic subunits that would otherwise suffer from a lack of efficiency. Previous studies focusing on antigen-AH interaction mechanisms, performed with model proteins, suggested that electrostatic interactions and phosphate-hydroxyl ligand exchanges drive protein adsorption on AH. We however recently evidenced that NaCl, used in vaccine formulation, provokes AH particle aggregation. This must be taken into account to interpret data related to protein adsorption on AH. Here, we report on the successful development and use of a stable AH-coated surface to explore the mechanisms of protein adsorption by means of ultrasensitive surface analysis tools. Bovine serum albumin (BSA) adsorption was studied at different pHs and ionic strengths (I) using quartz crystal microbalance. The results show that protein adsorption on the AH adjuvant cannot be explained solely by electrostatic interactions and ligand exchanges. Hence, a higher adsorption was observed at pH 3 compared to pH 7, although AH and BSA respectively undergo repulsive and attractive electrostatic interactions at these pH values. Almost no effect of I on adsorption was moreover noted at pH 7. These new developments and observations not only suggest that other mechanisms govern protein adsorption on AH but also offer a new platform for the study of antigen adsorption in the context of vaccine formulation. Immobilizing particles on QCM sensors also enriches the range of applications for which QCM can be exploited, especially in colloid science.

Cation-chelation and pH induced controlled switching of the non-fouling properties of bacterial crystalline films

We report the controlled loss of the anti-fouling activity of the S-layer protein SbpA from Lysinibacillus sphaericus (CCM2177). This protein forms crystal-like films with square lattice (p4) via self-assembly on almost any type of surfaces. Such engineered bioinspired nanometric membranes are known by their excellent preventive performance under biological conditions. However, their exposure to certain treatments can lead to gradual degradation of the S-protein layer. In this work, two distinctive approaches are studied for understanding either specific or non-specific degradation of the film, by treatment with a chelating agent (EDTA), which interacts with inner Ca²⁺ ions, or Citrate buffer (with pH<pI), respectively. Subsequently, the degraded protein films have been tested upon binding of polyelectrolytes of different charge and endothelial HUVEC cells, and their performance compared to that of intact S-layers. The SbpA protein layer degradation process as well as its impact on the loss of anti-fouling properties have been characterized, in terms of mass and structural changes, by means of real time quartz crystal microbalance with dissipation (QCM-D) monitoring, atomic force microscopy (AFM) experiments, and fluorescence microscopy. The results show that overall structure degradation (citrate buffer) has a higher impact on the loss of antifouling properties than selective removal of divalent cations. Thus, crystal structure integrity is a necessary condition for bacterial antifouling properties.

Study of the Relation between the Resonance Behavior of Thickness Shear Mode (TSM) Sensors and the Mechanical Characteristics of Biofilms

This work analyzes some key aspects of the behavior of sensors based on piezoelectric Thickness Shear Mode (TSM) resonators to study and monitor microbial biofilms. The operation of these sensors is based on the analysis of their resonance properties (both resonance frequency and dissipation factor) that vary in contact with the analyzed sample. This work shows that different variations during the microorganism growth can be detected by the sensors and highlights which of these changes are indicative of biofilm formation. TSM sensors have been used to monitor in real time the development of Staphylococcus epidermidis and Escherichia coli biofilms, formed on the gold electrode of the quartz crystal resonators, without any coating. Strains with different ability to produce biofilm have been tested. It was shown that, once a first homogeneous adhesion of bacteria was produced on the substrate, the biofilm can be considered as a semi-infinite layer and the quartz sensor reflects only the viscoelastic properties of the region immediately adjacent to the resonator, not being sensitive to upper layers of the biofilm. The experiments allow the microrheological evaluation of the complex shear modulus (G* = G′ + jG″) of the biofilm at 5 MHz and at 15 MHz, showing that the characteristic parameter that indicates the adhesion of a biofilm for the case of S. epidermidis and E. coli, is an increase in the resonance frequency shift of the quartz crystal sensor, which is connected with an increase of the real shear modulus, related to the elasticity or stiffness of the layer. In addition both the real and the imaginary shear modulus are frequency dependent at these high frequencies in biofilms.

Erythrocytes-based quartz crystal microbalance cytosensor for in situ detection of cell surface sialic acid

Erythrocytes-based quartz crystal microbalance cytosensor forin situdetection of cell surface sialic acid using AuNPs/APBA signal amplification nanoprobe.

Effective segregation of cytocompatible chitosan molecules in a silica-surfactant nanostructure formation process

Segregated nanostructures of Chi molecules by a silica-surfactant self-assembly film formation process were successfully prepared, and it is shown that their self-organization affects the cytocompatibility.

A sensitivity metric and software to guide the analysis of soft films measured by a quartz crystal microbalance

The TPM-sensitivity metric guides the analysis of viscoelastic thin films studied with a quartz crystal microbalance.

A Review of Cell Adhesion Studies for Biomedical and Biological Applications

Cell adhesion is essential in cell communication and regulation, and is of fundamental importance in the development and maintenance of tissues. The mechanical interactions between a cell and its extracellular matrix (ECM) can influence and control cell behavior and function. The essential function of cell adhesion has created tremendous interests in developing methods for measuring and studying cell adhesion properties. The study of cell adhesion could be categorized into cell adhesion attachment and detachment events. The study of cell adhesion has been widely explored via both events for many important purposes in cellular biology, biomedical, and engineering fields. Cell adhesion attachment and detachment events could be further grouped into the cell population and single cell approach. Various techniques to measure cell adhesion have been applied to many fields of study in order to gain understanding of cell signaling pathways, biomaterial studies for implantable sensors, artificial bone and tooth replacement, the development of tissue-on-a-chip and organ-on-a-chip in tissue engineering, the effects of biochemical treatments and environmental stimuli to the cell adhesion, the potential of drug treatments, cancer metastasis study, and the determination of the adhesion properties of normal and cancerous cells. This review discussed the overview of the available methods to study cell adhesion through attachment and detachment events.

Chemically grafted fibronectin for use in QCM-D cell studies

Traditionally, fibronectin has been used as a physisorbed surface coating (physFN) in cell culture experiments due to its critical role in cell adhesion. However, because the resulting layer is thick, unstable, and of unpredictable uniformity, this method of fibronectin deposition is unsuitable for some types of research, including quartz crystal microbalance (QCM) experiments involving cells. Here, we present a new method for chemical immobilization of fibronectin onto silicon oxide surfaces, including QCM crystals pre-coated with silicon oxide. We characterize these chemically coated fibronectin surfaces (chemFN) as well as physFN ones using spectroscopic ellipsometry (SE), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and contact angle measurements. A cell culture model demonstrates that cells on chemFN and physFN surfaces exhibit similar viability, structure, adhesion and metabolism. Finally, we perform QCM experiments using cells on both surfaces which demonstrate the superior suitability of chemFN coatings for QCM research, and provide real-time QCM-D data from cells subjected to an actin depolymerizing agent. Overall, our method of chemical immobilization of fibronectin yields great potential for furthering cellular experiments in which thin, stable and uniform coatings are desirable. As QCM research with cells has been rather limited in success thus far, we anticipate that this new technique will particularly benefit this experimental system by availing it to the much broader field of cell mechanics.

An aptamer-based quartz crystal microbalance biosensor for sensitive and selective detection of leukemia cells using silver-enhanced gold nanoparticle label

An aptamer-based quartz crystal microbalance (QCM) biosensor was developed for the selective and sensitive detection of leukemia cells. In this strategy, aminophenylboronic acid-modified gold nanoparticles (APBA-AuNPs) which could bind to cell membrane were used for the labeling of cells followed by silver enhancement, through which significant signal amplification was achieved. Both the QCM and fluorescence microscopy results manifested the selectivity of the sensor designed. A good linear relationship between the frequency response and cell concentration over the range of 2×10(3)-1×10(5)cells/mL was obtained, with a detection limit of 1160cells/mL. This approach provides a simple, rapid, and economical method for leukemia cell analysis which might have great potential for further use.

Annexin-V modified QCM sensor for the label-free and sensitive detection of early stage apoptosis

An easily-made Annexin-V modified quartz crystal microbalance (QCM) sensor was constructed for the quantitative detection of early stage apoptosis for the first time, achieving the goals of specific capture and sensitive detection of target cells in one step without the need for cell labelling.

Acoustic detection of cell adhesion to a coated quartz crystal microbalance - implications for studying the biocompatibility of polymers

Biocompatibility of polymers is an important parameter for the successful application of polymers in tissue engineering. In this work, quartz crystal microbalance (QCM) devices were used to follow the adhesion of NIH 3T3 fibroblasts to QCM surfaces modified with fibronectin (FN) and poly-D-lysine (PDL). The variations in sensor resonant frequency (Δf) and motional resistance (ΔR), monitored as the sensor signal, revealed that cell adhesion was favored in the PDL-coated QCMs. Fluorescence microscopy images of seeded cells showed more highly spread cells on the PDL substrate, which is consistent with the results of the QCM signals. The sensor signal was shown to be sensitive to extracellular matrix (ECM)-binding motifs. Ethylenediaminetetraacetic acid (EDTA) and soluble Gly-Arg-Gly-Asp-Ser (GRGDS) peptides were used to interfere with cell-ECM binding motifs onto FN-coated QCMs. The acquired acoustic signals successfully showed that in the presence of 30 mM EDTA or 1 mM GRGDS, cell adhesion is almost completely abolished due to the inhibition/blocking of integrin function by these compounds. The results presented here demonstrate the potential of the QCM sensor to study cell adhesion, to monitor the biocompatibility of polymers and materials, and to assess the effect of adhesion modulators. QCM sensors have great potential in tissue engineering applications, as QCM sensors are able to analyze the biocompatibility of surfaces and it has the added advantage of being able to evaluate, in situ and in real time, the effect of specific drugs/treatments on cells.

Quartz crystal microbalances as tools for probing protein-membrane interactions

Extensive studies on the spontaneous collapse of phospholipid vesicles into supported lipid bilayers (SLBs) have led to procedures which allow SLB formation on a wealth of substrates and lipid compositions. SLBs provide a widely accepted and versatile model system which mimics the natural cell membrane separating the extracellular and intracellular fluids of the living cell. The quartz crystal microbalance with dissipation monitoring (QCM-D) has been central both in the understanding of vesicle collapse into SLBs on various substrates and in probing the kinetics and mechanisms of biomolecular interactions with SLBs in real time. We describe a robust procedure to form SLBs of zwitterionic and charged lipids on SiO(2) sensor crystals which subsequently can be exploited to probe the interaction between proteins and peptides with the SLB.

Acoustic detection of melanosome transport in Xenopus laevis melanophores

Organelle transport studies are often performed using melanophores from lower vertebrates due to the ease of inducing movements of pigment granules (melanosomes) and visualizing them by optical microscopy. Here, we present a novel methodology to monitor melanosome translocation (which is a light-sensitive process) in the dark using the quartz crystal microbalance with dissipation monitoring (QCM-D) technique. This acoustic sensing method was used to study dispersion and aggregation of melanosomes in Xenopus laevis melanophores. Reversible sensor responses, correlated to optical reflectance measurements, were obtained by alternating addition and removal of melatonin (leading to melanosome aggregation) and melanocyte-stimulating hormone (MSH) (leading to melanosome dispersion). By confocal microscopy, it was shown that a vertical redistribution of melanosomes occurred during the dispersion/aggregation processes. Furthermore, the transport process was studied in the presence of cytoskeleton-perturbing agents disrupting either actin filaments (latrunculin) or microtubules (nocodazole). Taken together, these experiments suggest that the acoustic responses mainly originate from melanosome transport along actin filaments (located close to the cell membrane), as expected based on the penetration depth of the QCM-D technique. The results clearly indicate the potential of QCM-D for studies of intracellular transport processes in melanophores.

Acoustic sensors as a biophysical tool for probing cell attachment and cell/surface interactions

Acoustic biosensors offer the possibility to analyse cell attachment and spreading. This is due to the offered speed of detection, the real-time non-invasive approach and their high sensitivity not only to mass coupling, but also to viscoelastic changes occurring close to the sensor surface. Quartz crystal microbalance (QCM) and surface acoustic wave (Love-wave) systems have been used to monitor the adhesion of animal cells to various surfaces and record the behaviour of cell layers under various conditions. The sensors detect cells mostly via their sensitivity in viscoelasticity and mechanical properties. Particularly, the QCM sensor detects cytoskeletal rearrangements caused by specific drugs affecting either actin microfilaments or microtubules. The Love-wave sensor directly measures cell/substrate bonds via acoustic damping and provides 2D kinetic and affinity parameters. Other studies have applied the QCM sensor as a diagnostic tool for leukaemia and, potentially, for chemotherapeutic agents. Acoustic sensors have also been used in the evaluation of the cytocompatibility of artificial surfaces and, in general, they have the potential to become powerful tools for even more diverse cellular analysis.

Cell adhesion on chiral surface: the role of protein adsorption

Chirality is one of the basic, unique, and most appealing features of biological molecules; however, many intriguing chiral phenomena in biological world remains insufficiently revealed yet. In this research, we fabricated chiral surfaces by assembling natural chiral amino acids-cysteine of opposite configurations (D- and L-) onto gold surfaces, respectively, and investigated the adhesion of the L929 fibroblast on them. No significant differences were observed in the density of adherent cells under serum-free culture condition; while in serum-containing condition, significantly more cells adhered on the L-Cys assembled surfaces. This phenomenon suggested that serum protein might play an important role in mediating the selective adhesion of cells on chiral surfaces. Hence, we adopted both radiolabeling and surface plasmon resonance (SPR) techniques to monitor protein adsorption onto the above surfaces. The results evidently showed more proteins adsorbed onto surfaces assembled with L-Cys. We propose that the difference in protein adsorption on chiral surfaces as demonstrated in this paper might not only shed light on the ensuing investigation of bio-related chirality phenomena, but also provide a novel strategy for the rational design and fabrication of novel biomaterials and bio-related devices based on chiral effects.

Effect of interfacial proteins on osteoblast-like cell adhesion to hydroxyapatite nanocrystals

A quartz crystal microbalance with dissipation (QCM-D) technique was employed to detecting the protein adsorption and subsequent osteoblast-like cell adhesion to hydroxyapatite (HAp) nanocrystals. The interfacial phenomena with the preadsorption of three proteins (albumin (BSA), fibronectin (Fn), and collagen (Col)), the subsequent adsorption of fetal bovine serum (FBS), and the adhesion of the cells were investigated. The QCM-D measured the frequency shift (Δf) and dissipation energy shift (ΔD), and the viscoelastic properties of the adlayers were evaluated using ΔD-Δf plot and Voigt-based viscoelastic model. The Col adsorption significantly showed higher Δf, ΔD, elasticity, and viscosity values as compared to the BSA and Fn adsorption, and the subsequent FBS adsorption depended on the preadsorbed proteins. The ΔD-Δf plot of the cell adhesion also showed a different behavior depending on the surfaces, and the Fn- and Col-modified surfaces showed the rapid mass and ΔD changes by forming the viscous interfacial layers with cell adhesion, indicating that the processes were affected by the cellular reaction through the extracellular matrix (ECM) proteins. The confocal laser scanning microscope images of adherent cells showed a different morphology and pseudopod on the surfaces. The cells adhered to the surfaces modified with the Fn and Col had significantly uniaxially expanded shapes and fibrous pseudopods, and those modified with the BSA had a round shape. Therefore, the different cell-protein interactions would cause the arrangement of the ECM and the cytoskeleton changes at the interfaces, and these phenomena were successfully detected by the QCM-D and Voigt-based model.

Detection of interfacial phenomena with osteoblast-like cell adhesion on hydroxyapatite and oxidized polystyrene by the quartz crystal microbalance with dissipation

The adhesion process of osteoblast-like cells on hydroxyapatite (HAp) and oxidized polystyrene (PSox) was investigated using a quartz crystal microbalance with dissipation (QCM-D), confocal laser scanning microscope (CLSM), and atomic force microscope (AFM) techniques in order to clarify the interfacial phenomena between the surfaces and cells. The interfacial viscoelastic properties (shear viscosity (η(ad)), elastic shear modulus (μ(ad)), and tan δ) of the preadsorbed protein layer and the interface layer between the surfaces and cells were estimated using a Voigt-based viscoelastic model from the measured frequency (Δf) and dissipation shift (ΔD) curves. In the ΔD-Δf plots, the cell adhesion process on HAp was classified as (1) a mass increase only, (2) increases in both mass and ΔD, and (3) slight decreases in mass and ΔD. On PSox, only ΔD increases were observed, indicating that the adhesion behavior depended on the surface properties. The interfacial μ(ad) value between the material surfaces and cells increased with the number of adherent cells, whereas η(ad) and tanδ decreased slightly, irrespective of the surface. Thus, the interfacial layer changed the elasticity to viscosity with an increase in the number. The tan δ values on HAp were higher than those on PSox and exceeded 1.0. Furthermore, the pseudopod-like structures of the cells on HAp had periodic stripe patterns stained with a type I collagen antibody, whereas those on PSox had cell-membrane-like structures unstained with type I collagen. These results indicate that the interfacial layers on PSox and HAp exhibit elasticity and viscosity, respectively, indicating that the rearrangements of the extracellular matrix and cytoskeleton changes cause different cell-surface interactions. Therefore, the different cell adhesion process, interfacial viscoelasticity, and morphology depending on the surfaces were successfully monitored in situ and evaluated by the QCM-D technique combined with other techniques.