A nivalenol imprinted quartz crystal microbalance sensor based on sulphur-incorporating cobalt ferrite and its application to rice samples

Nivalenol as a mycotoxin pesticide is toxic to humans and animals and causes major health problems including hemorrhage, anemia, and vomiting. Thus, the need for fast and reliable analytical systems in terms of the management of health risks resulting from nivalenol exposure has increased in recent years. The aim of this study involved a novel molecularly imprinted quartz crystal microbalance sensor preparation based on sulphur-incorporating cobalt ferrite for nivalenol detection in rice samples. For this aim, cobalt ferrite and sulfur incorporated cobalt ferrite were successfully synthesized by sol-gel and calcination methods, respectively. Then, nivalenol imprinted quartz crystal microbalance chips based on cobalt ferrite and sulfur incorporated cobalt ferrite were prepared by an ultraviolet polymerization technique including N,N'-azobisisobutyronitrile as the initiator, ethylene glycol dimethacrylate as the cross-linker, methacryloylamidoglutamic acid as the monomer, and nivalenol as the analyte. After some spectroscopic, electrochemical and microscopic characterization studies, the developed sensor was applied to rice grain samples for the determination of nivalenol. The linearity of the prepared sensor was observed to be 1.0-10.0 ng L-1 and the limit of quantification and detection limit were found to be 1.0 and 0.33 ng L-1, respectively. Finally, the high selectivity, repeatability, and stability of the prepared sensor based on sulphur-incorporating cobalt ferrite and a molecularly imprinted polymer can ensure safe food consumption worldwide.

Real-time kinetic analysis and detection of glycated hemoglobin A1c using a quartz crystal microbalance-based aptasensor

Glycated hemoglobin (HbA1c) has been an important biomarker for long-term diagnosis and monitoring of diabetes mellitus. The development of a rapid, reliable, and less sophisticated device to measure HbA1c is imperative to facilitate efficient early-care diabetes management. To date, no existing aptamer-based biosensor (aptasensor) for detecting HbA1c has been developed using a quartz crystal microbalance (QCM). In this study, the aptamer specific to HbA1c as a novel biosensing receptor was covalently functionalized onto a QCM substrate via mixed self-assembled monolayers (SAMs). A portable QCM equipped with a liquid-flow module was used to investigate the biospecificity, sensitivity, and interaction dynamics of the aptamer functionalized surfaces. The real-time kinetic analysis of HbA1c binding to the surface-functionalized aptamers revealed "on" and "off" binding rates of 4.19 × 104 M-1 s-1 and 2.43 × 10-3 s-1, respectively. These kinetic parameters imply that the QCM-based aptasensor specifically recognizes HbA1c with an equilibrium dissociation constant as low as 57.99 nM. The linear detection of HbA1c spanned from 13 to 108 nM, with a limit of detection (LOD) of 26.29 nM. Moreover, the spiked plasma sample analysis offered compelling evidence that this aptasensor is a promising technique for developing a point-of-care device for diabetes mellitus.

Signal amplification of a quartz crystal microbalance immunosensor by gold nanoparticles-polyethyleneimine for hepatitis B biomarker detection

The procedures currently used for hepatitis B (HB) detection are not suitable for screening, clinical diagnosis, and point-of-care testing (POCT). Therefore, we developed and tested a QCM-based immunosensor by surface modification with AuNP-PEIs to amplify the signal and provide an oriented-immobilization surface. The AuNP-PEIs were characterized by ICP-Mass, UV/Vis, DLS, FE-SEM, and ATR-FTIR. After coating AuNP-PEIs on the gold electrode surface, anti-HBsAg antibodies were immobilized using NHS/EDC chemistry based on response surface methodology (RSM) optimization. The efficiency of the immunosensor was assessed by human sera and data were compared to gold-standard ELISA using receiver-operating-characteristic (ROC) analysis. FE-SEM, AFM, EDS, and EDS mapping confirmed AuNP-PEIs are homogeneously distributed on the surface with a high density and purity. After antibody immobilization, the immunosensor exhibited good recognition of HBsAg with a calibration curve of ∆F =  - 6.910e-7x + 10(R2 = 0.9905), a LOD of 1.49 ng/mL, and a LOQ of 4.52 ng/mL. The immunosensor yielded reliable and accurate results with a specificity of 100% (95% CI 47.8-100.0) and sensitivity of 100% (95% CI 96.2-100.0). In conclusion, the fabricated immunosensor has the potential as an analytic tool with high sensitivity and specificity. However, further investigations are needed to convert it to a tiny lab-on-chip for HB diagnosis in clinical samples.

Magnetically Modulated Differential Quartz Crystal Microbalances for Rapid, Ultrasensitive, and Direct Probing of Prostate-Specific Antigens Conjugated with Magnetic Beads

The occurrence and development of diseases are closely related to overexpression of specific biomarkers in the serum of patients. Rapid and sensitive biomarker detection is beneficial for early diagnosis and treatment. However, the current laboratory processes and assays for biomarker detection are expensive and time-consuming, and their operation also requires a large number of professionals. We developed a magnetically modulated differential quartz crystal microbalance (MMD-QCM) method combined with magnetic bead (MB) labels for rapid and highly sensitive quantitative detection of prostate-specific antigen (PSA). Because MBs exhibit magnetized rotation motion under an applied AC magnetic field, a pair of QCMs are utilized to measure the difference between the magnetic motion intensities of the MBs and the MB-PSA immune complex to determine the PSA concentration. Experimental results demonstrate that the proposed method can be adopted to determine the PSA concentration in a wide range of 0.01-1000 ng/mL as well as exhibit a low detection limit of 0.065 ng/mL. In addition, the proposed scheme enables fast detection and low sample consumption. The single detection process takes less than 4 h and requires only 113 μL of sample solution. The proposed detection strategy is superior to the existing detection method and can be effectively used in early screening and prognostic diagnosis of cancer and other related diseases owing to its simplicity, low cost, and high speed.

Engineering phosphatidylinositol-4,5-bisphosphate model membranes enriched in endocytic cargo: A neutron reflectometry, AFM and QCM-D structural study

The combination of in vitro models of biological membranes based on solid-supported lipid bilayers (SLBs) and of surface sensitive techniques, such as neutron reflectometry (NR), atomic force microscopy (AFM) and quartz crystal microbalance with dissipation monitoring (QCM-D), is well suited to provide quantitative information about molecular level interactions and lipid spatial distributions. In this work, cellular plasma membranes have been mimicked by designing complex SLB, containing phosphatidylinositol 4,5-bisphosphate (PtdIns4,5P2) lipids as well as incorporating synthetic lipo-peptides that simulate the cytoplasmic tails of transmembrane proteins. The QCM-D results revealed that the adsorption and fusion kinetics of PtdIns4,5P2 are highly dependent of Mg2+. Additionally, it was shown that increasing concentrations of PtdIns4,5P2 leads to the formation of SLBs with higher homogeneity. The presence of PtdIns4,5P2 clusters was visualized by AFM. NR provided important insights about the structural organization of the various components within the SLB, highlighting that the leaflet symmetry of these SLBs is broken by the presence of CD4-derived cargo peptides. Finally, we foresee our study to be a starting point for more sophisticated in vitro models of biological membranes with the incorporation of inositol phospholipids and synthetic endocytic motifs.

Molecularly Imprinted Chalcone-Branched Polyimide-Based Chemosensors with Stripe Nanopatterns for the Detection of Melittin

In this study, a chalcone-branched polyimide (CB-PI) was synthesized by the Steglich esterification reaction for selective recognition of the toxic peptide melittin (MEL). MEL was immobilized on a nanopatterned poly(dimethylsiloxane) (PDMS) mold using a conventional surface modification technique to increase binding sites. A stripe-nanopatterned thin CB-PI film was formed on a quartz crystal (QC) substrate by simultaneously performing microcontact printing and ultraviolet (UV) light dimerization using a MEL-immobilized mold. The surface morphology changes and dimensions of the molecularly imprinted polymer (MIP) films with stripe nanopatterns (S-MIP) were analyzed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The sensing signals (Δf and Qe) of the S-MIP sensor were investigated upon adsorption in a 100-μL dilute plasma solution containing 30 μg/mL MEL, and its reproducibility, reuse, stability, and durability were investigated. The S-MIP sensor showed high sensitivity (5.49 mL/mg) and coefficient of determination (R2 = 0.999), and the detection limit (LOD) and the quantification limit (LOQ) were determined as 0.3 and 1.1 μg/mL, respectively. In addition, the selectivity coefficients (k*) calculated from the selectivity tests were 2.7-5.7, 2.1-4.3, and 2.8-4.6 for bovine serum albumin (BSA), immunoglobulin G (IgG), and apamin (APA), respectively. Our results indicate that the nanopatterned MIP sensors based on CB-PI demonstrate great potential as a sensing tool for the quantitative analysis of biomolecules.

A novel molecular imprinted QCM sensor based on MoS2NPs-MWCNT nanocomposite for zearalenone determination

Zearalenone (ZEN) is a mycotoxin that has a carcinogenic effect and is often found at a high rate in frequently consumed foods. In this study, a characteristic molecular imprinted quartz crystal microbalance (QCM) sensor based on molybdenum disulfide nanoparticle (MoS2NPs)-multiwalled carbon nanotube (MWCNT) nanocomposite (MoS2NPs-MWCNTs) is presented for selective determination of ZEA in rice samples. Firstly, molybdenum disulfide nanoparticle (MoS2NP)-multiwalled carbon nanotube nanocomposites were characterized by using microscopic, spectroscopic, and electrochemical techniques. Then, ZEA-imprinted QCM chip was prepared in the presence of methacryloylamidoglutamicacid (MAGA) as monomer, N,N'-azobisisobutyronitrile (AIBN) as initiator, and ZEA as target molecule by using UV polymerization. The sensor revealed a linearity toward ZEA in the range 1.0-10.0 ng L-1 with a detection limit (LOD) of 0.30 ng L-1. The high repeatability, reusability, selectivity, and stability of the developed sensor enable reliable ZEA detection in rice samples.

Sugar-Lectin Interactions for Direct and Selective Detection of Escherichia coli Bacteria Using QCM Biosensor

Pathogenic Escherichia coli (E. coli) remains a safety concern in the preservation and quality of green leafy vegetables. Sugar-lectin interactions provide a reliable, specific, and effective sensing platform for the detection of bacteria as compared to the tedious conventional plate counting technique. Herein, we present the synthesis of 4-(N-mannosyl) benzoic acid (4-NMBA) and 4-thiophenyl-N-mannose (4-TNM) via a two-step reductive amination for the detection of E. coli using a quartz crystal microbalance (QCM) biosensor. The 4-NMBA was synthesized with mannose and para-aminobenzoic (4-PBA), while the 4-TNM was synthesized with mannose and 4-aminophenyl disulfide (4-AHP) using water and acetic acid in a 1:1 ratio. The resultant structure of mannose derivatives (4-NMBA and 4-TNM) was characterized and confirmed using analytical tools, such as Mass Spectrometer, SEM, and FTIR. The choice of ligands (mannose derivatives) is ascribed to the specific recognition of mannose to the FimH lectin of the type 1 pilus of E. coli. Furthermore, the 4-PBA and 4-AHP conjugated to mannose increase the ligand affinity to FimH lectins. The setup of the QCM biosensor was composed of modification of the crystal surface and the covalent attachment of ligands for the detection of E. coli. The piezoelectric effect (frequency shift of the quartz) was proportional to the change in mass added to the gold crystal surface. Both the 4-NMBA- and 4-TNM-coated QCM sensors had a limit of detection of 3.7 CFU/mL and 6.6 CFU/mL with a sensitivity of 2.56 × 10³ ng/mL and 8.99 × 10^-5 ng/mL, respectively, within the dynamic range of 10³ to 10⁶ CFU/mL. This study demonstrates the application of ligand-coated QCM biosensors as a cost-effective, simple, and label-free technology for monitoring pathogenic bacteria via molecular interactions on crystal surfaces.

Detection of formic acid and acetic acid gases by a QCM sensor coated with an acidified multi-walled carbon nanotube membrane

In this paper, the acidified multi-walled carbon nanotubes (MWCNTs) film was coated on the quartz crystal microbalance (QCM) to prepare a high-performance sensor for the real-time detection of organic acid gases. The material characteristics of the thin films were analysed by field emission scanning electro microscopy (FESEM), Raman spectra and X-ray photoelectron spectroscopy (XPS). The organic acid vapours' sensing results indicated that acidized-MWCNTs thin film exhibited good frequency response, repeatability, reversibility and stability. There is a clear linear relationship between the frequency offset and the organic acid vapours with concentration below 5.0 ppm, and the detection limit of 0.77 and 0.73 ppm for formic and acetic acid vapours, respectively. The sensor shows the highest response to formic acid vapour than acetic acid vapour which may be ascribed to molecular polarity. Furthermore, a sensing mechanism model was introduced to understand the adsorption reaction between organic acid molecules and acidized-MWCNTs. This paper proves that acidized-MWCNTs is a potential and suitable material for organic acid vapour detection when combined with a QCM sensor.

Detection of Salmonella Typhimurium with Gold Nanoparticles Using Quartz Crystal Microbalance Biosensor

Demonstration of the Salmonella Typhimurium detection system was shown utilizing a quartz crystal microbalance (QCM) biosensor and signal enhancement by gold nanoparticles. In this study, a benchtop system of a QCM biosensor was utilized for the detection of Salmonella Typhimurium. It was designed with a peristaltic pump system to achieve immobilization of antibodies, detection of Salmonella, and the addition of gold nanoparticles to the sensor. As a series of biochemical solutions were introduced to the surface, the proposed system was able to track the changes in the resonant frequency which were proportional to the variations of mass on the sensor. For antibody immobilization, polyclonal antibodies were immobilized via self-assembled monolayers to detect Salmonella O-antigen. Subsequently, Salmonella Typhimurium was detected by antibodies and the average frequency before and after detecting Salmonella was compared. The highest frequency shifts were −26.91 Hz for 109 CFU/mL while the smallest frequency shift was −3.65 Hz corresponding to 103 CFU/mL. For the specificity tests, non-Salmonella samples such as E. coli, Listeria, and Staphylococcus resulted in low cross-reactivity. For signal amplification, biotinylated antibodies reacted to Salmonella followed by streptavidin—100 nm AuNPs through biotin-avidin interaction. The frequency shifts of 103 CFU/mL showed −28.04 Hz, and consequently improved the limit of detection.

Precision Temperature Control System with Low EMI for Applications in Analyzing Thermal Properties of Highly Sensitive Piezoelectric Sensors

A low electromagnetic interference (EMI), precision temperature control system for sensitive piezoelectric sensors stabilization and their thermal characteristics research was proposed. Quartz crystal microbalance (QCM) was chosen as the device to be tested. Recently, QCMs found use in many fields of study such as biology, chemistry, and aerospace. They often operate in harsh environments and are exposed to many external factors including temperature fluctuations, to which QCMs are highly susceptible. Such disturbances can cause undesirable resonant frequency shifts resulting in measurement errors that are difficult to eliminate. The proposed solution enables measurements of QCMs thermal characteristics, effectiveness evaluation of temperature compensation methods, and testing of the frequency stability. As a part of the developed solution, two independent temperature regulators were used: first to maintain the QCM crystal at desired temperature, and second to keep the QCM oscillator circuit at fixed temperature. The single regulator consists of a thermoelectric module (TEC) used for both heating and cooling. Two considered TEC driving methods were compared in terms of EMI and their impact on the QCM signal quality. The proposed system was examined for its temperature stabilization capability showing high stability of 11 mK_p-p for one hour and the setpoint accuracy of ±15 mK in the full temperature range.

Design and Analysis of Quartz Crystal Microbalance with a New Ring-Shaped Interdigital Electrode

In this paper, a new type of ring-shaped interdigital electrode is proposed to improve the accuracy and repeatability of quartz crystal microbalance. The influence of different types of single finger, dot finger, dot double-finger electrodes on mass sensitivity distribution as well as the optimal proportion of finger and gap width are obtained through multi-physical coupling simulation. The results show that the design criteria of interdigital electrodes will not change with the increase in the number of fingers. The gap width should obey the decrease order from central to edge and be about twice the width of finger. The width of the outermost finger and the radius of the middle dot electrode should be maintained at about 0.4 and 0.2 times of the total electrode radius. An experiment was carried out to verify that the quartz wafer with a dot double-finger electrode has high quality factors and less modal coupling, which can satisfy the engineering application well. As a conclusion, this study provides a design idea for the electrode to maintain a uniform distribution of quartz crystal microbalance mass sensitivity.

Characterization of Thermal Gradient Effects on a Quartz Crystal Microbalance

Quartz crystal microbalances are widely used sensors with applications for the detection of very-low-mass deposition in many different fields, from contamination monitoring in the high vacuum of deep space missions to the monitoring of biological activity or pollution using specifically designed active substrates. These sensors are very stable over time; nevertheless, their sensitivity to the temperature is well known, and different implementations have been devised to correct it, e.g., through compensation with a dual crystal. This paper deals with the effects of temperature on QCM but separates the case of uniform crystal temperature from the case of in-plane temperature gradients considering a QCM based on quartz crystals with deposited film resistors used as both RTDs and heaters. This configuration allows both an accurate temperature measurement and efficient thermal control, allowing the achievement of crystals temperatures in the order of 400 °C higher than the environment with a low power dissipation of the order of 1 W. The film resistors deposited around the electrodes allow directly measuring the average crystal temperature and directly delivering power to the crystal for thermal control. The localized delivery of the heat nevertheless also determines uncommon temperature fields on the crystal, and thus, an analysis of both the effects of temperature on the new microbalance was performed. The temperature gradient has strong effects on the frequency; therefore, along with the temperature, the thermal gradients have tobe compensated. The calibration of the QCM thermometers and the assessment of the achievable measurement accuracy were performed, as well as the determination of the frequency-temperature relationship. The comparison between frequency changes in the case of uniform temperature and those observed while using crystal heaters proved that temperature gradients have a strong effect on the crystal frequency. To identify the temperature field on the crystal surface of a QCM crystal, the gold coating of the deposited films was removed to achieve an emissivity acceptable for thermal imaging with an IR camera. Moreover, image processing for emissivity correction was developed. In order to correlate the temperature gradient with the frequency variation, a test campaign was performed to measure the frequency changes derived from different power levels delivered to the crystal heaters. From this test campaign and thermal analysis, the effect of the thermal gradient was assessed.

Guar Gum/Ethyl Cellulose-Polyvinyl Pyrrolidone Composite-Based Quartz Crystal Microbalance Humidity Sensor for Human Respiration Monitoring

In this work, the guar gum (GG) and the electrospinned ethyl cellulose-polyvinyl pyrrolidone (EC-PVP) nanofibers were used as humidity-sensitive materials for fabricating a quartz crystal microbalance (QCM) sensor. Fourier transform infrared spectroscopy, scanning electron microscopy, water contact angle test, and X-ray photoelectron spectra were used to characterize the synthesized GG/EC-PVP composite material, confirming its successful preparation and good hydrophilicity. The humidity sensitivity experiments were performed at room temperature. The GG/EC-PVP-coated QCM sensor has high sensitivity (55.72 Hz/%RH) and low hysteresis (2.8% RH) in a wide relative humidity range (0-97% RH), short response/recovery time (26/2 s), excellent selectivity, good repeatability, and stability. The combined action of hydrophilic groups and porous structure enhances the humidity sensitivity. The GG/EC-PVP sensor can be used to capture and measure typical breathing patterns in different human basic emotions due to its good performance. Furthermore, a lie-detector system was also designed for judging the lying through detecting the emotional breathing pattern of the subjects.

Quantification of Desiccated Extracellular Vesicles by Quartz Crystal Microbalance

Extracellular vesicle (EV) quantification is a procedure through which the biomedical potential of EVs can be used and their biological function can be understood. The number of EVs isolated from cell culture media depends on the cell status and is especially important in studies on cell-to-cell signaling, disease modeling, drug development, etc. Currently, the methods that can be used to quantify isolated EVs are sparse, and each have limitations. In this report, we introduce the application of a quartz crystal microbalance (QCM) as a biosensor for quantifying EVs in a small drop of volatile solvent after it evaporates and leaves desiccated EVs on the surface of the quartz crystal. The shifts in the crystal’s resonant frequency were found to obey Sauerbrey’s relation for EV quantities up to 6 × 10⁷, and it was determined that the biosensors could resolve samples that differ by at least 2.7 × 10⁵ EVs. A ring-shaped pattern enriched in EVs after the samples had dried on the quartz crystal is also reported and discussed. QCM technology is highly sensitive and only requires small sample volumes and is significantly less costly compared with the approaches that are currently used for EV quantification.

Study on the Preparation of Estrone Molecularly Imprinted Polymers and Their Application in a Quartz Crystal Microbalance Sensor via a Computer-Assisted Design

Computer simulations are widely used for the selection of conditions for the synthesis of molecularly imprinted polymers and can rapidly reduce the experimental cycle time and save labor and materials. In this paper, estrone molecularly imprinted polymers (E1-MIPs) are designed at the M062X/6-311+G(d,p) level with itaconic acid (IA) as the functional monomer. The imprinted molar ratio between E1 and IA was optimized, cross-linkers and solvents were screened, and the nature of interactions between E1 and IA was explored. The simulated results showed that pentaerythritol triacrylate was the best cross-linker. Meanwhile, when the imprinted molar ratio between E1 and IA was 1:4, the E1–IA complex had the largest amount of hydrogen bonds, the lowest binding energy, and the strongest stability. Using the simulation results as guidance, the E1-MIPs were prepared to modify the electrons of a quartz crystal microbalance (QCM) sensor. The experimental studies showed that the E1-MIPs-QCM sensor had the highest adsorption capacity to E1 in comparison with their analogues, and the lowest detection value of the sensor was 16.00 μg/L. The computer simulations and experimental studies could provide guidance for synthesize novel E1-MIPs materials. It also could provide important references and directions for the application of E1-MIPs.

The Role of Cytoskeleton Revealed by Quartz Crystal Microbalance and Digital Holographic Microscopy

The connection between cytoskeleton alterations and diseases is well known and has stimulated research on cell mechanics, aiming to develop reliable biomarkers. In this study, we present results on rheological, adhesion, and morphological properties of primary rat cardiac fibroblasts, the cytoskeleton of which was altered by treatment with cytochalasin D (Cyt-D) and nocodazole (Noc), respectively. We used two complementary techniques: quartz crystal microbalance (QCM) and digital holographic microscopy (DHM). Qualitative data on cell viscoelasticity and adhesion changes at the cell–substrate near-interface layer were obtained with QCM, while DHM allowed the measurement of morphological changes due to the cytoskeletal alterations. A rapid effect of Cyt-D was observed, leading to a reduction in cell viscosity, loss of adhesion, and cell rounding, often followed by detachment from the surface. Noc treatment, instead, induced slower but continuous variations in the rheological behavior for four hours of treatment. The higher vibrational energy dissipation reflected the cell’s ability to maintain a stable attachment to the substrate, while a cytoskeletal rearrangement occurs. In fact, along with the complete disaggregation of microtubules at prolonged drug exposure, a compensatory effect of actin polymerization emerged, with increased stress fiber formation.

Oxytocin-Selective Nanogel Antibody Mimics

Oxytocin imprinted polymer nanoparticles were synthesized by glass bead supported solid phase synthesis, with NMR and molecular dynamics studies used to investigate monomer–template interactions. The nanoparticles were characterized by dynamic light scattering, scanning- and transmission electron microscopy and X-ray photoelectron spectroscopy. Investigation of nanoparticle-template recognition using quartz crystal microbalance-based studies revealed sub-nanomolar affinity, k_d ≈ 0.3 ± 0.02 nM (standard error of the mean), comparable to that of commercial polyclonal antibodies, k_d ≈ 0.02–0.2 nM.

Dual-Mode and Label-Free Detection of Exosomes from Plasma Using an Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring

The biomolecular contents of extracellular vesicles, such as exosomes, have been shown to be crucial in intercellular communication and disease propagation. As a result, there has been a recent surge in the exploration of novel biosensing platforms that can sensitively and specifically detect exosomal content such as proteins and nucleic acids, with a view toward application in diagnostic assays. Here, we demonstrate dual-mode and label-free detection of plasma exosomes using an electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D). The platform adopts a direct immunosensing approach to effectively capture exosomes via their surface protein expression of CD63. By combining QCM-D with a tandem in situ electrochemical impedance spectroscopy measurement, we are able to demonstrate relationships between mass, viscoelasticity and impedance inducing properties of each functional layer and analyte. In addition to lowering the limit of detection (by a factor of 2-4) to 6.71 × 10⁷ exosome-sized particles (ESP) per mL in 25% v/v serum, the synergy between dissipation and impedance response introduces improved sensing specificity by offering further distinction between soft and rigid analytes, thereby promoting EQCM-D as an important technique for exosome analysis.

Monitoring Molecular Assembly of Biofilms Using Quartz Crystal Microbalance with Dissipation (QCM-D)

The structure and the functionality of biofilm proteins, the main components of the extracellular matrix, can be tuned by protein engineering. The use of binding kinetics data has been demonstrated in the characterization of recombinantly produced biofilm proteins to control their behavior on certain surfaces or under certain conditions. Quartz crystal microbalance with dissipation monitoring (QCM-D) allows measuring the change in resonance frequency and the energy loss and distribution upon the interaction of molecules with the surface. The characterization of the molecular assembly of curli biofilm proteins on different surfaces using QCM-D is presented here as a detailed protocol. The experimental procedure detailed in this chapter can be applied and modified for other biofilm proteins or subunits to determine their surface adsorption and kinetic binding characteristics.

Virtual Sensor Array Based on Butterworth-Van Dyke Equivalent Model of QCM for Selective Detection of Volatile Organic Compounds

Recently virtual sensor arrays (VSAs) have been developed to improve the selectivity of volatile organic compound (VOC) sensors. However, most reported VSAs rely on detecting single property change of the sensing material after their exposure to VOCs, thus resulting in a loss of much valuable information. In this work, we propose a VSA with the high dimensionality of outputs based on a quartz crystal microbalance (QCM) and a sensing layer of MXene. Changes in both mechanical and electrical properties of the MXene film are utilized in the detection of the VOCs. We take the changes of parameters of the Butterworth-van Dyke model for the QCM-based sensor operated at multiple harmonics as the responses of the VSA to various VOCs. The dimensionality of the VSA's responses has been expanded to four independent outputs, and the responses to the VOCs have shown good linearity in multidimensional space. The response and recovery times are 16 and 54 s, respectively. Based on machine learning algorithms, the proposed VSA accurately identifies different VOCs and mixtures, as well as quantifies the targeted VOC in complex backgrounds (with an accuracy of 90.6%). Moreover, we demonstrate the capacity of the VSA to identify "patients with diabetic ketosis" from volunteers with an accuracy of 95%, based on the detection of their exhaled breath. The QCM-based VSA shows great potential for detecting VOC biomarkers in human breath for disease diagnosis.

Functional Lignin Nanoparticles with Tunable Size and Surface Properties: Fabrication, Characterization, and Use in Layer-by-Layer Assembly

Lignin is the richest source of renewable aromatics and has immense potential for replacing synthetic chemicals. The limited functionality of lignin is, however, challenging for its potential use, which motivates research for creating advanced functional lignin-derived materials. Here, we present an aqueous-based acid precipitation method for preparing functional lignin nanoparticles (LNPs) from carboxymethylated or carboxypentylated lignin. We observe that the longer grafted side chains of carboxypentylated lignin allow for the formation of larger LNPs. The functional nanoparticles have high tolerance against salt and aging time and well-controlled size distribution with R_h ≤ 60 nm over a pH range of 5-11. We further investigate the layer-by-layer (LbL) assembly of the LNPs and poly(allylamine hydrochloride) (PAH) using a stagnation point adsorption reflectometry (SPAR) and quartz crystal microbalance with dissipation (QCM-D). Results demonstrate that LNPs made of carboxypentylated lignin (i.e., PLNPs with the adsorbed mass of 3.02 mg/m²) form a more packed and thicker adlayer onto the PAH surface compared to those made of carboxymethylated lignin (i.e., CLNPs with the adsorbed mass of 2.51 mg/m²). The theoretical flux, J, and initial rate of adsorption, (dΓ/dt)₀, analyses confirm that 22% of PLNPs and 20% of CLNPs arriving at the PAH surface are adsorbed. The present study provides a feasible platform for engineering LNPs with a tunable size and adsorption behavior, which can be adapted in bionanomaterial production.

Quartz Crystal Microbalance with Dissipation Monitoring (QCM-D): Preparing Functionalized Lipid Layers for the Study of Complex Protein-Ligand Interactions

Quartz crystal microbalance with dissipation monitoring (QCM-D) is one of the most widely used techniques for the deposition of lipid layers and provides a useful tool for protein-ligand analysis. By using functionalized lipids, for example, with nitrilotriacetic acid (NTA) or biotin, one can couple a molecule to the surface to investigate ligand interactions. Using lipid layers in this way allows for the analysis of complex binding events such as conformational changes, fibrillation, and hierarchical clustering on the surface, which is difficult to interpret with conventional surface sensor techniques. Deposition of lipids and subsequent molecular interactions are easily monitored using both the frequency and the dissipation, which have distinct features in bilayer formation and make QCM-D the ideal technique to use. Here we describe the formation of biotinylated lipid bilayers using two different types of lipids and the subsequent addition of avidin, which can then be used as a basis for linking biotinylated molecules to the surface. These protocols can be adapted to use other lipid moieties and linking chemistries.

Aptasensor for paraquat detection by gold nanoparticle colorimetric method

This study aimed to develop an aptasensor for paraquat detection by gold nanoparticles. The specific aptamer for paraquat was selected by using the SELEX process via capillary electrophoresis. Sixty-three aptamer candidates were amplified by asymmetric PCR and screened for paraquat binding using gold nanoparticles (AuNPs). Aggregation of AuNPs was specifically induced by desorption of paraquat binding aptamers from the surface of AuNPs as a result of aptamer-target interaction leading to the color change from red to purple. Aptamer 77F with the following sequence: 5'-AGGCTTACACCTGAAAAGCGGCTTAATTTACACTACTGTAT-3' was selected as a highly specific aptamer for paraquat. The detection limit of paraquat was 0.267 µg/mL by colorimetry and 1.573 µg/mL by the quartz crystal microbalance (QCM) technique. This aptamer showed specificity for paraquat by colorimetry. Dimethyl phophite, diethyl phophite and O,O diethyl thiophosphate potassium salt did not react by colorimetry but, exhibited a weak nonspecific reaction by QCM. This is first time that an aptasensor was used for detection of paraquat based on QCM. However, the aptasensor based on the colorimetric method simply uses a generation of a signal that can be detected by the naked eye. This technique is rapid, low cost easy to use and suitable for on-site detection of herbicide residue.

Highly selective sensor for the detection of Hg2+ ions using homocysteine functionalised quartz crystal microbalance with cross-linked pyridinedicarboxylic acid

This study reports an insightful portable vector network analyser (VNA)-based measurement technique for quick and selective detection of Hg2+ ions in nanomolar (nM) range using homocysteine (HCys)-functionalised quartz-crystal-microbalance (QCM) with cross-linked-pyridinedicarboxylic acid (PDCA). The excessive exposure to mercury can cause damage to many human organs, such as the brain, lungs, stomach, and kidneys, etc. Hence, the authors have proposed a portable experimental platform capable of achieving the detection in 20-30 min with a limit of detection (LOD) 0.1 ppb (0.498 nM) and a better dynamic range (0.498 nM-6.74 mM), which perfectly describes its excellent performance over other reported techniques. The detection time for various laboratory-based techniques is generally 12-24 h. The proposed method used the benefits of thin-film, nanoparticles (NPs), and QCM-based technology to overcome the limitation of NPs-based technique and have LOD of 0.1 ppb (0.1 μg/l) for selective Hg2+ ions detection which is many times less than the World Health Organization limit of 6 μg/l. The main advantage of the proposed QCM-based platform is its portability, excellent repeatability, millilitre sample volume requirement, and easy process flow, which makes it suitable as an early warning system for selective detection of mercury ions without any costly measuring instruments.

Application of QCM in Peptide and Protein-Based Drug Product Development

AT-cut quartz crystals vibrating in the thickness-shear mode (TSM), especially quartz crystal resonators (QCRs), are well known as very efficient mass sensitive systems because of their sensitivity, accuracy, and biofunctionalization capacity. They are highly reliable in the measurement of the mass of deposited samples, in both gas and liquid matrices. Moreover, they offer real-time monitoring, as well as relatively low production and operation costs. These features make mass sensitive systems applicable in a wide range of different applications, including studies on protein and peptide primary packaging, formulation, and drug product manufacturing process development. This review summarizes the information on some particular implementations of quartz crystal microbalance (QCM) instruments in protein and peptide drug product development as well as their future prospects.

QCM-D Study of Time-Resolved Cell Adhesion and Detachment: Effect of Surface Free Energy on Eukaryotes and Prokaryotes

Cell-material interactions are crucial for many biomedical applications, including medical implants, tissue engineering, and biosensors. For implants, while the adhesion of eukaryotic host cells is desirable, bacterial adhesion often leads to infections. Surface free energy (SFE) is an important parameter that controls short- and long-term eukaryotic and prokaryotic cell adhesion. Understanding its effect at a fundamental level is essential for designing materials that minimize bacterial adhesion. Most cell adhesion studies for implants have focused on correlating surface wettability with mammalian cell adhesion and are restricted to short-term time scales. In this work, we used quartz crystal microbalance with dissipation monitoring (QCM-D) and electrical impedance analysis to characterize the adhesion and detachment of S. cerevisiae and E. coli, serving as model eukaryotic and prokaryotic cells within extended time scales. Measurements were performed on surfaces displaying different surface energies (Au, SiO₂, and silanized SiO₂). Our results demonstrate that tuning the surface free energy of materials is a useful strategy for selectively promoting eukaryotic cell adhesion and preventing bacterial adhesion. Specifically, we show that under flow and steady-state conditions and within time scales up to ∼10 h, a high SFE, especially its polar component, enhances S. cerevisiae adhesion and hinders E. coli adhesion. In the long term, however, both cells tend to detach, but less detachment occurs on surfaces with a high dispersive SFE contribution. The conclusions on S. cerevisiae are also valid for a second eukaryotic cell type, being the human embryonic kidney (HEK) cells on which we performed the same analysis for comparison. Furthermore, each cell adhesion phase is associated with unique cytoskeletal viscoelastic states, which are cell-type-specific and surface free energy-dependent and provide insights into the underlying adhesion mechanisms.

Detection of DDT and carbaryl pesticides in honey by means of immunosensors based on high fundamental frequency quartz crystal microbalance (HFF-QCM)

BACKGROUND

In recent years there has been a concern about the presence of pesticides in honey because residues of DDT and carbaryl were found in honey samples. Traditional techniques, such as chromatography, reach the required limits of detection (LOD) but are not suitable for in situ implementation in the honey-packaging industry due to their high cost and the need for highly qualified staff for routine operation. Biosensors offer simplicity, low cost, and easy handling for analytical purposes in food applications.

RESULTS

Piezoelectric immunosensors based on high fundamental frequency quartz crystal microbalance (HFF-QCM) have been developed for the detection of carbaryl and DDT in honey. Biorecognition was based on competitive immunoassays in the conjugate-coated format, using monoclonal antibodies as specific immunoreagents. The assay LODs attained by the HFF-QCM immunosensors were 0.05 μg L^-1 for carbaryl and 0.24 μg L^-1 for DDT, reaching a similar level of detectability to that of the usual reference techniques. The practical LODs in honey samples were 8 μg kg^-1 for carbaryl and 24 μg kg^-1 for DDT. The immunosensors' analytical performance allow the detection of these pesticides in honey at EU regulatory levels with good accuracy (recovery percentages ranging from 94% to 130% within the working range of each pesticide standard curve) and precision (coefficients of variation in the 9-36% range).

CONCLUSION

The proposed immunosensor is a promising analytical tool that could be implemented for quality control in the honey packaging industry, to simplify and to reduce the cost of the routine pesticide analysis in this appreciated natural food. © 2020 Society of Chemical Industry.

Acoustic Immunosensing of Exosomes Using a Quartz Crystal Microbalance with Dissipation Monitoring

Exosomes are endocytic lipid-membrane bound bodies with the potential to be used as biomarkers in cancer and neurodegenerative disease. The limitations and scarcity of current exosome characterization approaches have led to a growing demand for translational techniques, capable of determining their molecular composition and physical properties in physiological fluids. Here, we investigate label-free immunosensing, using a quartz crystal microbalance with dissipation monitoring (QCM-D), to detect exosomes by exploiting their surface protein profile. Exosomes expressing the transmembrane protein CD63 were isolated by size-exclusion chromatography from cell culture media. QCM-D sensors functionalized with anti-CD63 antibodies formed a direct immunoassay toward CD63-positive exosomes in 75% v/v serum, exhibiting a limit-of-detection of 2.9 × 108 and 1.4 × 108 exosome sized particles (ESPs)/mL for frequency and dissipation response, respectively, i.e., clinically relevant concentrations. Our proof-of-concept findings support the adoption of dual-mode acoustic analysis of exosomes, leveraging both frequency and dissipation monitoring for use in bioanalytical characterization.

Study of the adsorption of endocrine disruptor compounds on typical filter materials using a quartz crystal microbalance

Drinking water containing environmental endocrine disruptor compounds (EDCs) endangers human health, and researching the purification process of drinking water for the effective removal of EDCs is vitally important. Filtering plays a crucial role in the bio-adsorption of EDCs, but the adsorption mechanism that occurs between the EDCs and filters remains unclear. In this study, a quartz crystal microbalance (QCM) was employed to elucidate the adsorption mechanism because QCM is a label-free method that possesses high selectivity, high stability, and high sensitivity. The results indicated that a pseudo-first-order kinetic model best fits the adsorption process of four different EDCs, which included bisphenol A (BPA), estrone (E1), estradiol (E2), and sulfamethoxazole (SMZ), on silica (quartz sand), a typical filter material surface. The order of the amount of individual EDCs absorbed on the silica surface was q_E2 > q_E1 > q_SMZ > q_BPA and related to their molecular structure, polarity, and chargeability. As the initial EDC concentration increased, the adsorbed amount of the four EDCs on the silica surface increased; however, the initial concentration had little effect on removal efficiency. The calculated Freundlich exponent (1/n) demonstrated SMZ and BPA showed a greater tendency for adsorption than E1 and E2. The mass response time on the surface of the silica gradually increased as the pH increased (from 5.5 to 8.5), indicating the adsorption rate was inhibited by the increase in pH. The addition of electrolytes shortened the mass response time of EDCs on the QCM chip. The pH and ionic strength produced no significant effects on adsorption because hydrophobicity was the primary contributor to adsorption. This study facilitated a better understanding of the interaction between EDCs and filters in water treatment.

Real-time analysis of atrazine biodegradation and sessile bacterial growth: A quartz crystal microbalance with dissipation monitoring study

Biodegradation is a fundamental process for removal of the environmentally prevalent herbicide, atrazine, from contaminated waters. Biodegradation is more efficient when bacteria are attached on surface of an adsorbing carrier that supports the microbial population. However, for various reasons, biodegradation is almost always monitored in the liquid phase. In this study, we employ a novel Quartz Crystal Microbalance with Dissipation technique (QCM-D) for continuous, real-time monitoring of the attachment of atrazine-degrading bacteria to the surface, atrazine adsorption and degradation, and the consequent proliferation of the irreversibly attached sessile bacteria. The effect of atrazine biodegradation was observed in a batch mode of operation, in which a significant frequency decrease of the piezoelectric sensor was observed in the QCM-D, due to the proliferation of atrazine-degrading bacteria on the expense of atrazine. The latter was confirmed microscopically. Results also suggest that the viscoelastic properties of the atrazine-degrading consortium immediately changed in response to the presence of atrazine, whereas those of the non-degrading consortium were not affected. Importantly though, atrazine adsorption was similar regardless of the sessile consortia layers. When the QCM-D flow cell was exposed to a continuous flow of saturated atrazine solution, the degrading consortium layer was significantly more fluidic compared to batch mode conditions. The magnitude and kinetics of atrazine adsorption, which were monitored using QCM-D, were higher on bacterial cells comparing to the pristine, polystyrene-coated sensor. Findings from the current study can improve bioremediation design and open an avenue for studies on biodegradation and adsorption of micro-pollutants using QCM-D technology.

Quartz Crystal Microbalances as Tools for Probing Protein-Membrane Interactions

Extensive studies on the spontaneous collapse of phospholipid vesicles into supported lipid bilayers (SLBs) have led to procedures which allow SLB formation on a wealth of substrates and lipid compositions. SLBs provide a widely accepted and versatile model system which mimics the natural cell membrane separating the extracellular and intracellular fluids of the living cell. The quartz crystal microbalance with dissipation monitoring (QCM-D) has been central in both the understanding of vesicle collapse into SLBs on various substrates but also in probing the kinetics and mechanisms of biomolecular interactions with SLBs in real time. We describe a robust procedure to form SLBs of zwitterionic and charged lipids on SiO₂ sensor crystals which subsequently can be exploited to probe the interaction between proteins and peptides with the SLB.

Langmuir Analysis of the Binding Affinity and Kinetics for Surface Tethered Duplex DNA and a Ligand-Apoprotein Complex

In this work, the hybridization and dehybridization of ssDNA with 20 bases at gold coated sensor surfaces modified with complementary 20 bases capture probe ssDNA was investigated at 18 °C by quartz crystal microbalance measurements with dissipation monitoring (QCM-D). A sequence of 20 base pairs with a melting temperature of about 64 °C was chosen, since in many biosensor studies the target molecules are DNA or RNA oligomers of similar length. It turned out that at the applied experimental conditions the DNA hybridization was irreversible, and therefore the hybridization and dehybridization process could not be described by the Langmuir model of adsorption. Nevertheless, quantitative dehybridization could be achieved by rinsing the sensor surface thoroughly with pure water. When in contrast the hybridization of a target with only 10 bases complementary to the outermost 10 bases of the 20 bases capture probe was studied, binding and unbinding were reversible, and the hybridization/dehybridization process could be satisfactorily described by the Langmuir model. For the 10 base pair sequence, the melting temperature was about 36 °C. Apparently, for Langmuir behavior, it is important that the experiments are applied at a temperature sufficiently close to the melting temperature of the sequence under investigation to ensure that at least traces of the target molecules are unhybridized (i.e., there needs to be an equilibrium between hybridized and dehybridized target molecules). To validate the reliability of our experimental approach we also studied the reconstitution and disassembly of the flavoprotein dodecin at flavin-terminated DNA monolayers, as according to previous studies it is assumed that the apododecin-flavin system can be well described by the Langmuir model. As a result, this assumption could be verified. Using three different approaches, K_D values were obtained that differ not more than by a factor of 4.

QCM detection of molecule-nanoparticle interactions for ligand shells of varying morphology

Nanoparticles (NP) have widespread applications from sensing to drug delivery where much behavior is determined by the nature of the surface and the resulting intermolecular interactions with the local environment. Ligand mixtures enable continuously tunable behavior where both the composition and morphology influence molecular interactions. Mixed ligand shells form multiple morphologies ranging from Janus to patchy and stripe-like with varying domain dimensions. Solvent-NP interactions are generally measured by solubility measures alone. Here we develop a quartz crystal microbalance (QCM) approach to more broadly quantify molecule-NP interactions via vapor phase uptake into solid NP-films independent from solvation constraints. The composition and morphology of mixed ligand shells were found to exhibit pronounced non-monotonic behavior that deviated from continuum thermodynamics, highlighting the influence of ligand morphology upon absorption/adsorption. Alkyl and perfluorinated thiols were used as a model case with constant core-size distribution. The ligand morphology was determined by 19F NMR. Molecule uptake into NPs was measured with five benzene derivatives with varied degree of fluorination. For the cases examined, QCM measurements revealed enhanced uptake for patchy morphologies and suppressed uptake for stripe-like morphologies. These results contrast with insights from solubility measures alone where QCM sometimes identified significant molecular uptake of poor solvents. This QCM method thus provides new insights to molecule-NP interactions independent of the solvation shell.

Affinity Ionic Liquids for Chemoselective Gas Sensing

Selective gas sensing is of great importance for applications in health, safety, military, industry and environment. Many man-made and naturally occurring volatile organic compounds (VOCs) can harmfully affect human health or cause impairment to the environment. Gas analysis based on different principles has been developed to convert gaseous analytes into readable output signals. However, gas sensors such as metal-oxide semiconductors suffer from high operating temperatures that are impractical and therefore have limited its applications. The cost-effective quartz crystal microbalance (QCM) device represents an excellent platform if sensitive, selective and versatile sensing materials were available. Recent advances in affinity ionic liquids (AILs) have led them to incorporation with QCM to be highly sensitive for real-time detection of target gases at ambient temperature. The tailorable functional groups in AIL structures allow for chemoselective reaction with target analytes for single digit parts-per-billion detection on mass-sensitive QCM. This structural diversity makes AILs promising for the creation of a library of chemical sensor arrays that could be designed to efficiently detect gas mixtures simultaneously as a potential electronic in future. This review first provides brief introduction to some conventional gas sensing technologies and then delivers the latest results on our development of chemoselective AIL-on-QCM methods.

Water Retention of Calcium-Containing Pectin Studied by Quartz Crystal Microbalance and Infrared Spectroscopy with a Humidity Control System

To examine differences of water-retention mechanisms between pectins with and without Ca²⁺, quartz crystal microbalance (QCM) and infrared microspectroscopy combined with a humidity-control system were used to analyze differences in amounts and species of adsorbed water to pectins without and with Ca²⁺. QCM analysis shows that water contents are ∼2-3 times larger for the pectin film with Ca²⁺ than that without Ca²⁺. The difference IR spectra suggest that long, medium, and short H-bond water molecules (free, medium, and bound water) are adsorbed to the pectin film without Ca²⁺. IR peak shifts of C═O of COOH and C-OH suggest that these water molecules are hydrogen-bonded to C═O and C-OH groups. In addition to these water molecules, bulk water is adsorbed. IR OH band areas fitted by four Gaussian components show that bulk water is mainly adsorbed to the pectin film with Ca²⁺, possibly among skeletal chains of pectin bridged by Ca²⁺.

Amyloid-β Peptide Triggers Membrane Remodeling in Supported Lipid Bilayers Depending on Their Hydrophobic Thickness

Amyloid-β (Aβ) peptide has been implicated in Alzheimer's disease, which is a leading cause of death worldwide. The interaction of Aβ peptides with the lipid bilayers of neuronal cells is a critical step in disease pathogenesis. Recent evidence indicates that lipid bilayer thickness influences Aβ membrane-associated aggregation, while understanding how Aβ interacts with lipid bilayers remains elusive. To address this question, we employed supported lipid bilayer (SLB) platforms composed of different-length phosphatidylcholine (PC) lipids (C12:0 DLPC, C18:1 DOPC, C18:1-C16:0 POPC), and characterized the resulting interactions with soluble Aβ monomers. Quartz crystal microbalance-dissipation (QCM-D) experiments identified concentration-dependent Aβ peptide adsorption onto all tested SLBs, which was corroborated by fluorescence recovery after photobleaching (FRAP) experiments indicating that higher Aβ concentrations led to decreased membrane fluidity. These commonalities pointed to strong Aβ peptide-membrane interactions in all cases. Notably, time-lapsed fluorescence microscopy revealed major differences in Aβ-induced membrane morphological responses depending on SLB hydrophobic thickness. For thicker DOPC and POPC SLBs, membrane remodeling involved the formation of elongated tubule and globular structures as a passive means to regulate membrane stress depending on Aβ concentration. In marked contrast, thin DLPC SLBs were not able to accommodate extensive membrane remodeling. Taken together, our findings reveal that membrane thickness influences the membrane morphological response triggered upon Aβ adsorption.

Effect of Temperature Changes on Serum Protein Adsorption on Thermoresponsive Cell-Culture Surfaces Monitored by A Quartz Crystal Microbalance with Dissipation

Thermoresponsive cell-culture polystyrene (PS) surfaces that are grafted with poly(N-isopropylacrylamide) (PIPAAm) facilitate the cultivation of cells at 37 °C and the detachment of cultured cells as a sheet with an underlying extracellular matrix (ECM) by reducing the temperature. However, the ECM and cell detachment mechanisms are still unclear because the detachment of cells from thermoresponsive surfaces is governed by complex interactions among the cells/ECM/surface. To explore the dynamic behavior of serum protein adsorption/desorption, thermoresponsive surfaces that correspond to thermoresponsive tissue-culture PS dishes were formed on sensor chips for quartz crystal microbalance with dissipation (QCM-D) measurements. X-ray photoelectron spectroscopy (XPS) measurements and temperature-dependent frequency and dissipation shifts, Δf and ΔD, using QCM-D revealed that the thermoresponsive polymers were successfully grafted onto oxidized, thin PS films on the surfaces of the sensor chips. Increased amounts of adsorbed bovine serum albumin (BSA) and fibronectin (FN) were observed on the thermoresponsive polymer-grafted surfaces at 37 °C when compared with those at 20 °C because of enhanced hydrophobic interactions with the hydrophobic, thermoresponsive surface. While the calculated masses of adsorbed BSA and FN using QCM-D were 3⁻5 times more than those that were obtained from radiolabeling, the values were utilized for relative comparisons among the same substrate. More importantly, the thermoresponsive, dynamic behavior of serum protein adsorption/desorption was monitored using the QCM-D technique. Observations of this dynamic behavior revealed that the BSA and FN that were adsorbed at 37 °C remained on both surfaces after decreasing the temperature to 20 °C.

Label-Free Cell-Based Assay for Characterization of Biomolecules and Receptors

We present a method to study the interaction between biomolecules and receptors present on the cell surface. This enables studies of molecular interactions in a natural biological context. As the analyte interacts with the receptors still intact on the cell surface, the experimental data provides complete dynamics and complexity of the interaction, thereby generating highly informative data. Attana's cell-based biosensor platform can be used to obtain this information from a diverse range of interactions as described in these protocols, which detail how to grow or capture cells on a surface, how to stabilize and visualize the cells on the surface, and how to set up assays to measure detailed interaction kinetics directly on the cell surface.

Nanomanufacture of Free-Standing, Porous, Janus-Type Films of Polymer-Plant Virus Nanoparticle Arrays

We present a facile method for preparing hierarchical assemblies of cowpea mosaic virus (CPMV) nanoparticles adsorbed onto patterned polypyrrole copolymer arrays, which can be released as a freely standing and microporous polymer-protein membrane with a Janus-type structure. The patterning protocol is based on colloidal sphere lithography wherein a sacrificial honeycomb pattern composed of colloidal polystyrene (PS) microspheres is assembled on an electrode. A thin layer of polypyrrole film is electropolymerized within the interstices of the template and monitored using an electrochemical quartz crystal microbalance with dissipation (EC-QCM-D) and microscopy. Dissolving the PS template reveals an inverse opaline pattern capable of electrostatically capturing the CPMV particles. Through an electrochemical trigger, the polypyrrole-CPMV delaminates from the surface producing a self-sustaining polymer-protein membrane that can potentially be used for sensing and nanocargo applications.

High-density lipoprotein sensor based on molecularly imprinted polymer

Decreased blood level of high-density lipoprotein (HDL) is one of the essential criteria in diagnosing metabolic syndrome associated with the development of atherosclerosis and coronary heart disease. Herein, we report the synthesis of a molecularly imprinted polymer (MIP) that selectively binds HDL, namely, HDL-MIP, and thus serves as an artificial, biomimetic sensor layer. The optimized polymer contains methacrylic acid and N-vinylpyrrolidone in the ratio of 2:3, cross-linked with ethylene glycol dimethacrylate. On 10 MHz dual electrode quartz crystal microbalances (QCM), such HDL-MIP revealed dynamic detection range toward HDL standards in the clinically relevant ranges of 2–250 mg/dL HDL cholesterol (HDL-C) in 10 mM phosphate-buffered saline (PBS, pH = 7.4) without significant interference: low-density lipoprotein (LDL) yields 5% of the HDL signal, and both very-low-density lipoprotein (VLDL) and human serum albumin (HSA) yield 0%. The sensor reveals recovery rates between 94 and 104% at 95% confidence interval with precision of 2.3–7.7% and shows appreciable correlation (R² = 0.97) with enzymatic colorimetric assay, the standard in clinical tests. In contrast to the latter, it achieves rapid results (10 min) during one-step analysis without the need for sample preparation.

Graphical Abstract

Amyloid-like protein nanofibrous membranes as a sensing layer infrastructure for the design of mass-sensitive biosensors

Quartz crystal microbalances (QCMs) have been used in the literature for mass sensitive biosensor applications. However, their performance, reliability and stability have been limited by the chemical treatment steps required for the functionalization and activation of the QCM surface, prior to antibody immobilization. Specifically, these steps cause increased film thickness, which diminishes performance by mass overload, and create a harsh environment, which reduces biological activity. In this work, we eliminated this chemical step by introducing a sensing layer modification using electrospun amyloid like-bovine serum albumin (AL-BSA) nanofibers on QCM surfaces. Owing to the self-functionality of AL-BSA nanofibers, these modified QCM surfaces were directly activated by glutaraldehyde (GA). To assess the performance of these modified electrodes, a model protein, lysozyme (Lys), was selected as the biological agent to be immobilized. Frequency measurements were performed in batch (dip-and-dry) and continuous (flow-cell) processes, and binding performances were compared. AL-BSA modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), quartz crystal microbalance (QCM), contact angle (CA) and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Protein detection was measured based on the frequency shift before and after the covalent bonding of Lys. Under optimized conditions, the proposed immobilization platforms could bind 335ng/mL and 250ng/mL of Lys for batch and continuous processes, respectively. Our results demonstrate the potential usage of these self-functional electrospun AL-BSA infrastructure sensing layers on QCM surfaces. This modification enables the direct immobilization of bioactive agents by eliminating any surface functionalization process for further mass-sensitive biosensor applications.

Physico-electrochemical Characterization of Pluripotent Stem Cells during Self-Renewal or Differentiation by a Multi-modal Monitoring System

Monitoring pluripotent stem cell behaviors (self-renewal and differentiation to specific lineages/phenotypes) is critical for a fundamental understanding of stem cell biology and their translational applications. In this study, a multi-modal stem cell monitoring system was developed to quantitatively characterize physico-electrochemical changes of the cells in real time, in relation to cellular activities during self-renewal or lineage-specific differentiation, in a non-destructive, label-free manner. The system was validated by measuring physical (mass) and electrochemical (impedance) changes in human induced pluripotent stem cells undergoing self-renewal, or subjected to mesendodermal or ectodermal differentiation, and correlating them to morphological (size, shape) and biochemical changes (gene/protein expression). An equivalent circuit model was used to further dissect the electrochemical (resistive and capacitive) contributions of distinctive cellular features. Overall, the combination of the physico-electrochemical measurements and electrical circuit modeling collectively offers a means to longitudinally quantify the states of stem cell self-renewal and differentiation.

Label-Free Detection of Gliadin in Food by Quartz Crystal Microbalance-Based Immunosensor

Gluten is a protein composite found in wheat and related grains including barley, rye, oat, and all their species and hybrids. Gluten matrix is a biomolecular network of gliadins and glutenins that contribute to the texture of pastries, breads, and pasta. Gliadins are mainly responsible for celiac disease, one of the most widespread food-related pathologies in Western world. In view of the importance of gliadin proteins, by combining the quartz crystal microbalance technology, a cheap and robust piezoelectric transducer, with the so-called photonic immobilization technique, an effective surface functionalization method that provides spatially oriented antibodies on gold substrates, we realized a sensitive and reliable biosensor for quantifying these analytes extracted from real samples in a very short time. The resulting immunosensor has a limit of detection of about 4 ppm and, more remarkably, shows excellent sensitivity in the range 7.5-15 ppm. This feature makes our device reliable and effective for practical applications since it is able to keep low the influence of false positives.

Effective antibodies immobilization and functionalized nanoparticles in a quartz-crystal microbalance-based immunosensor for the detection of parathion

BACKGROUND

Biosensor-based detection provides a rapid and low-cost alternative to conventional analytical methods for revealing the presence of the contaminants in water as well as solid matrices. Although important to be detected, small analytes (few hundreds of Daltons) are an issue in biosensing since the signal they induce in the transducer, and specifically in a Quartz-Crystal Microbalance, is undetectable. A pesticide like parathion (M = 292 Da) is a typical example of contaminant for which a signal amplification procedure is desirable.

METHODS/FINDINGS

The ballasting of the analyte by gold nanoparticles has been already applied to heavy target as proteins or bacteria to improve the limit of detection. In this paper, we extend the application of such a method to small analytes by showing that once the working surface of a Quartz-Crystal Microbalance (QCM) has been properly functionalized, a limit of detection lower than 1 ppb is reached for parathion. The effective surface functionalization is achieved by immobilizing antibodies upright oriented on the QCM gold surface by a simple photochemical technique (Photonic Immobilization Technique, PIT) based on the UV irradiation of the antibodies, whereas a simple protocol provided by the manufacturer is applied to functionalize the gold nanoparticles. Thus, in a non-competitive approach, the small analyte is made detectable by weighing it down through a "sandwich protocol" with a second antibody tethered to heavy gold nanoparticles. The immunosensor has been proved to be effective against the parathion while showing no cross reaction when a mixture of compounds very similar to parathion is analyzed.

CONCLUSION/SIGNIFICANCE

The immunosensor described in this paper can be easily applied to any small molecule for which polyclonal antibodies are available since both the functionalization procedure of the QCM probe surface and gold nanoparticle can be applied to any IgG, thereby making our device of general application in terms of target analyte.

The attachment of colloidal particles to environmentally relevant surfaces and the effect of particle shape

Despite the prevalence of nonspherical colloidal particles, the role of particle shape in the transport of colloids is largely understudied. This study investigates the attachment of colloidal particles onto environmentally relevant surfaces while varying particle shape and ionic strength. Using quartz crystal microbalance and atomic force microscopy measurements, the role of particle shape was elucidated and possible mechanisms discussed. The attachment of both spherical and stretched polystyrene colloidal particles onto a smooth alginate-coated silica surface showed qualitative agreement with DLVO theory. Attachment onto a Harpeth humic acid (HHA) surface, however, significantly deviated from DLVO theory due to its high surface heterogeneity and extended confirmation from the silica surface. This extended confirmation provided increased potential for spherical particle entanglement, while the enlarged major axis of the stretched particles hindered their ability to attach. As ionic strength increased, the HHA layer condensed and provided less potential for spherical particle entanglement and therefore the selectivity for spherical particle attachment vanished. The findings presented in this study suggest that colloidal particle shape may play a complex and important role in predicting the transport of colloidal particles, especially in the presence of natural organic matter-coated surfaces.

Real-Time Quartz Crystal Microbalance Monitoring of Free Docosahexaenoic Acid Interactions with Supported Lipid Bilayers

Docosahexaenoic acid (DHA) is the most abundant polyunsaturated omega-3 fatty acid found in mammalian neuronal cell membranes. Although DHA is known to be important for neuronal cell survival, little is know about how DHA interacts with phospholipid bilayers. This study presents a detailed quartz crystal microbalance with dissipation monitoring (QCM-D) analysis of free DHA interactions with individual and mixed phospholipid supported lipid bilayers (SLB). DHA incorporation and subsequent changes to the SLBs viscoelastic properties were observed to be concentration-dependent, influenced by the phospholipid species, the headgroup charge, and the presence or absence of calcium ions. It was observed that 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) SLBs incorporated the greatest amount of DHA concentration, whereas the presence of phospholipids, phosphatidylserine (PS), and phosphatidylinositol (PI) in a POPC SLB significantly reduced DHA incorporation and changed the SLBs physicochemical properties. These observations are hypothesized to be due to a substitution event occurring between DHA and phospholipid species. PS domain formation in POPC/PS 8:2 SLBs was observed in the presence of calcium ions, which favored DHA incorporation to a similar level as for a POPC only SLB. The changes in SLB thickness observed with different DHA concentrations are also presented. This work contributes to an understanding of the physical changes induced in a lipid bilayer as a consequence of its exposure to different DHA concentrations (from 50 to 200 μM). The capacity of DHA to influence the physical properties of SLBs indicates the potential for dietary DHA supplementation to cause changes in cellular membranes in vivo, with subsequent physiological consequences for cell function.

Quartz crystal microbalance and photoacoustic measurements in dental photocuring

Photocured dental resins are used extensively in restorative procedures in dentistry. Inadequate curing reduces the lifetime of the dental restoration, and consequently it is essential to precisely measure the polymerisation kinetics. In this study, two techniques, Quartz Crystal Microbalance (QCM) and Photoacoustic Spectroscopy (PAS), were used to monitor the real-time cure and to obtain the optical absorption spectra of resins, respectively. From the PAS measurements, the precise peaks of absorption were identified, and were used as the appropriate wavelength of the photocuring light in the QCM monitoring. The combined use of these techniques allows reliable determination of the duration of the phases of physical and chemical changes that occur during photocuring. Two commercial dental resins were tested, and the results confirmed the advantages of using PAS and QCM to study polymerisation kinetics.

A Highly Sensitive Immunosorbent Assay Based on Biotinylated Graphene Oxide and the Quartz Crystal Microbalance

A high-sensitivity flow-based immunoassay is reported based on a gold-coated quartz crystal microbalance (QCM) chip functionalized directly in the QCM without requiring covalent conjugation steps. Specifically, the irreversible adsorption of a biotinylated graphene oxide-avidin complex followed by loading of a biotinylated capture antibody is applied to avoid more complex conventional surface modification chemistries and enable chip functionalization and sensing all within the QCM instrument. The resulting immunosensors exhibit significantly lower nonspecific protein adsorption and stronger signal for antigen sensing relative to simple avidin-coated sensors. Reproducible quantification of rabbit IgG concentrations ranging from 0.1 ng/mL to 10 μg/mL (6 orders of magnitude) can be achieved depending on the approach used to quantify the binding with simple mass changes used to detect higher concentrations and a horseradish peroxidase-linked detection antibody that converts its substrate to a measurable precipitate used to detect very low analyte concentrations. Sensor fabrication and assay performance take ∼5 h in total, which is on par with or faster than other techniques. Quantitative sensing is possible in the presence of complex protein mixtures, such as human plasma. Given the broad availability of biotinylated capture antibodies, this method offers both an easy and flexible platform for the quantitative sensing of a variety of biomolecule targets.

Au-Interaction of Slp1 Polymers and Monolayer from Lysinibacillus sphaericus JG-B53 - QCM-D, ICP-MS and AFM as Tools for Biomolecule-metal Studies

In this publication the gold sorption behavior of surface layer (S-layer) proteins (Slp1) of Lysinibacillus sphaericus JG-B53 is described. These biomolecules arrange in paracrystalline two-dimensional arrays on surfaces, bind metals, and are thus interesting for several biotechnical applications, such as biosorptive materials for the removal or recovery of different elements from the environment and industrial processes. The deposition of Au(0) nanoparticles on S-layers, either by S-layer directed synthesis or adsorption of nanoparticles, opens new possibilities for diverse sensory applications. Although numerous studies have described the biosorptive properties of S-layers, a deeper understanding of protein-protein and protein-metal interaction still remains challenging. In the following study, inductively coupled mass spectrometry (ICP-MS) was used for the detection of metal sorption by suspended S-layers. This was correlated to measurements of quartz crystal microbalance with dissipation monitoring (QCM-D), which allows the online detection of proteinaceous monolayer formation and metal deposition, and thus, a more detailed understanding on metal binding. The ICP-MS results indicated that the binding of Au(III) to the suspended S-layer polymers is pH dependent. The maximum binding of Au(III) was obtained at pH 4.0. The QCM-D investigations enabled the detection of Au(III) sorption as well as the deposition of Au(0)-NPs in real-time during the in situ experiments. Further, this method allowed studying the influence of metal binding on the protein lattice stability of Slp1. Structural properties and protein layer stability could be visualized directly after QCM-D experiment using atomic force microscopy (AFM). In conclusion, the combination of these different methods provides a deeper understanding of metal binding by bacterial S-layer proteins in suspension or as monolayers on either bacterial cells or recrystallized surfaces.