Signal amplification of a quartz crystal microbalance immunosensor by gold nanoparticles-polyethyleneimine for hepatitis B biomarker detection

The procedures currently used for hepatitis B (HB) detection are not suitable for screening, clinical diagnosis, and point-of-care testing (POCT). Therefore, we developed and tested a QCM-based immunosensor by surface modification with AuNP-PEIs to amplify the signal and provide an oriented-immobilization surface. The AuNP-PEIs were characterized by ICP-Mass, UV/Vis, DLS, FE-SEM, and ATR-FTIR. After coating AuNP-PEIs on the gold electrode surface, anti-HBsAg antibodies were immobilized using NHS/EDC chemistry based on response surface methodology (RSM) optimization. The efficiency of the immunosensor was assessed by human sera and data were compared to gold-standard ELISA using receiver-operating-characteristic (ROC) analysis. FE-SEM, AFM, EDS, and EDS mapping confirmed AuNP-PEIs are homogeneously distributed on the surface with a high density and purity. After antibody immobilization, the immunosensor exhibited good recognition of HBsAg with a calibration curve of ∆F =  - 6.910e-7x + 10(R2 = 0.9905), a LOD of 1.49 ng/mL, and a LOQ of 4.52 ng/mL. The immunosensor yielded reliable and accurate results with a specificity of 100% (95% CI 47.8-100.0) and sensitivity of 100% (95% CI 96.2-100.0). In conclusion, the fabricated immunosensor has the potential as an analytic tool with high sensitivity and specificity. However, further investigations are needed to convert it to a tiny lab-on-chip for HB diagnosis in clinical samples.

A quartz crystal microbalance biosensor based on polyethylenimine-modified gold electrode to detect hepatitis B biomarker

Biomarkers-based QCM-biosensors are suitable tools for the label-free detection of infectious diseases. In the current study, a QCM-biosensor was developed for the detection of HBsAg. Briefly, anti-HBsAg antibodies were covalently bound to the primary amines after PEI and thiolated-PEI surface modifications of gold-electrode. After RSM optimization, the statistical analysis revealed no significant difference between the immobilization yields of modified layers. Therefore, the PEI-modified QCM-biosensor was selected for further analysis. The PEI-surface was evaluated by FESEM, AFM, ATR-FTIR, and CA measurement. The surface hydrophilicity and its roughness were increased after PEI-coating. Also, FTIR confirmed the PEI-layering on the gold-surface. RSM optimization increased the antibody immobilization yield up to 80%. The QCM-biosensor showed noteworthy results with a wide dynamic range of 1-1 × 10³ ng/mL, LOD of 3.14 ng/mL, LOQ of 9.52 ng/mL, and detection capability in human-sera, which were comparable with the ELISA. The mean accuracy of the QCM-biosensor was obtained at 91% when measured by the spike recovery test using human-sera. The biosensor was completely regenerated using 50 mM NaOH and 1% SDS. The benefits provided by the developed biosensor such as broad dynamic range, sensitivity, selectivity, stability, regenerate ability, and low cost suggest its potential application for the non-invasive and timely monitoring of HBV-biomarker.

Lipopolysaccharide removal affinity matrices based on novel cationic amphiphilic peptides

Lipopolysaccharide (LPS) is one of the most challenging contaminants in biopharmaceutical industries. Cationic amphiphilic peptides (CAPs) -based affinity matrices can be potent tools for LPS removal in such situations. In this study, two newly designed CAPs derived from the LPS binding site of factor C of horseshoe crab S3E3 and S3E3A were immobilized chemo-selectively on diaminodipropylamine (DADPA) and iodoacetyl functionalized Sepharose beads. Both peptides were immobilized via their carboxyl or sulfhydryl (thiol) groups by amide or thioether bonds, respectively. The generated four affinity matrices were used to remove LPS from bovine serum albumin (BSA). The effects of different influential factors including pH, NaCl, Ethylenediaminetetraacetic acid (EDTA), and LPS concentrations on LPS removal efficiency and protein recovery were investigated by Plackett Burman (PB) method.Statistical analysis revealed that immobilized S3E3 removed LPS more effectively than immobilized S3E3A. Increasing pH and LPS concentration had negative effects on LPS removal efficiency and protein recovery. Increasing NaCl concentration improved protein recovery but reduced LPS removal efficiency. Other factors such as EDTA and type of buffer had no significant effect on the measured responses.

Effect of glutamic acid elimination/substitution on the biological activities of S3 cationic amphiphilic peptides

Cationic amphiphilic peptides (CAPs) are usually classified as bacterial membrane targeting molecules. Rational design and modification of cationic and amphiphilic properties of CAPs have made them to be used in new medical and biotechnological applications. However, CAPs modification and development strategies are challenging issues due to the risk of cytotoxicity or hemolytic activity. In this research, modified variants of S3 peptide were introduced. S3 is a linear 34 amino acid peptide derived from the lipopolysaccharide (LPS) binding site of factor C in horseshoe crab's hemolymph. Net positive charges of variants (S3E3 and S3E3A) increased by either eliminating negatively charged residues of the peptides or substituting them with alanine. Different biological activities of new variants including LPS binding affinity, antimicrobial activity, cytotoxicity against human breast tumor cell line, and hemolytic property were studied and compared to those of S3 peptide. S3E3 variant showed 68.5% higher LPS binding affinity, 40.4% stronger anti-microbial activity, conserved hemolytic property with the same anti-cancer activity compared to S3peptide. These results revealed that elimination/substitution of negatively charged residues will be a proper strategy for modification of S3 peptide.

Production of Erythropoietin-Specific Polyclonal Antibodies

BACKGROUND

Erythropoietin, as a principal hormone promotes red blood cell production in bone marrow. Varieties of erythropoietin biosimilar are being produced by recombinant DNA technology in cell cultures. The detection or quantifi cation of these molecules are being performed by diff erent methods which some of theme such as Western blot and enzymelinked immunosorbent assay (ELISA) require specifi c antibodies. High cost, inappropriate shipping (cold chain failures), reduced sensitivity and thus poor detection performance are common pitfalls of using commercial kits for performing immunological tests.

OBJECTIVES

To produce in-house polyclonal antibody against active pharmaceutical ingredient (API) of recombinant human erythropoietin (rh-EPO) was the aim of this study.

MATERIALS AND METHODS

Two healthy female albino rabbits were injected four times in 14 days interval using rh-EPO API as antigen. The produced antibody was separated from plasma via either caprylic acid or saturated ammonium sulfate precipitation and the results were compared from each purification methodologies. The antibody was further purified by ion exchange chromatography. Acceptable purity and good immunogenicity were detected respectively by SDS-PAGE and western blot analysis. The purified antibody was compared with a commercial kit to determine rh-EPO concentration in diff erent steps of production batches via ELISA.

RESULTS

The purity of antibodies after ion exchange chromatography, obtained from caprylic acid and ammonium sulfate precipitation were 97 and 80%, respectively.

CONCLUSIONS

As producing in house kits is one of the important challenges of bio- pharmaceutical manufacturers, a simple, cost- and time-effective, and easy to scale up strategy for making in-house polyclonal antibody was set up. Caprylic acid precipitation resulted higher purity than ammonium sulfate and fi nally purified antibody (97% purity) used as a capture antibody in sandwich ELISA test was able to detect erythropoietin antigen as sensitive (100%) and specifi c (100%) as commercial kits.

Exploration of Recombinant Streptokinase Degradation Products Under Various pH Reduction Conditions in Downstream Processing

BACKGROUND

Methods of producing streptokinase, which can be used in the treatment of myocardial infarction, by hemolytic streptococci and recombinant E. coli have been described in patents since 1955. Degradation products in active pharmaceutical ingredients (APIs) and finished pharmaceutical products are considered as impurities and it is required that these degradation impurities are minimized or rather avoided throughout manufacturing process.

OBJECTIVE

The aim of this study was to explore the occurrence of rSK degradation during acidification step in downstream processing.

METHODS

The polyclonal antibody was produced by immunization of New Zealand white (NZW) rabbit with pure rSK (purity>98%). The solubilized inclusion bodies with various pH values (4.2, 5.0 and 6.0) were analyzed by Western blotting using rSK polyclonal antibody.

RESULTS

Western blot analysis demonstrated the generation of rSK degradation products (with the molecular weight of about 27, 20 and 17 kDa) when the pH value of the solubilized inclusion bodies was reduced to 5.0 and 4.2, while no degradation of rSK observed at pH 6.0.

CONCLUSION

This study demonstrates that the level of pH reduction in the solubilized inclusion bodies during downstream processing plays an important role in generating rSK degradation products, and substantial post-solubilization degradation of rSK occurs at pH lower than 6.0. Development of these degradation impurities, which cannot be eliminated by subsequent chromatographic purifications, can be exclusively avoided during acidification procedure by appropriate pH adjustment approach in downstream processing.

Stability and biological activity evaluations of PEGylated human basic fibroblast growth factor

BACKGROUND

Human basic fibroblast growth factor (hBFGF) is a heparin-binding growth factor and stimulates the proliferation of a wide variety of cells and tissues causing survival properties and its stability and biological activity improvements have received much attention.

MATERIALS AND METHODS

In the present work, hBFGF produced by engineered Escherichia coli and purified by cation exchange and heparin affinity chromatography, was PEGylated under appropriate condition employing 10 kD polyethylene glycol. The PEGylated form was separated by size exclusion chromatography. Structural, biological activity, and stability evaluations were performed using Fourier transform infrared (FITR) spectroscopy, 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay and effect denaturing agent, respectively.

RESULTS

FITR spectroscopy revealed that both PEGylated and native forms had the same structures. MTT assay showed that PEGyalated form had a 30% reduced biological activity. Fluorescence spectrophotometry indicated that the PEGylated form denatured at higher concentrations of guanidine HCl (1.2 M) compared with native, which denatured at 0.8 M guanidine HCl.

CONCLUSIONS

PEGylation of hBFGF makes it more stable against denaturing agent but reduces its bioactivity up to 30%.

Investigation of purification process stresses on erythropoietin peptide mapping profile

BACKGROUND

Full compliance of recombinant protein peptide mapping chromatogram with the standard reference material, is one of the most basic quality control tests of biopharmaceuticals. Changing a single amino acid substitution or side chain diversity for a given peptide changes protein hydrophobicity and causes peak shape or retention time alteration in a peptide mapping assay. In this work, the effect of different stresses during the recombinant erythropoietin (EPO) purification process, including pH 4, pH 5, and room temperature were checked on product peptide mapping results.

MATERIALS AND METHODS

Cell culture harvest was purified under stress by different chromatographic techniques consisting of gel filtration, anionic ion exchange, concentration by ultrafiltration, and high resolution size exclusion chromatography. To induce more pH stresses, the purified EPO was exposed to pH stress 4 and 5 by exchanging buffer by a 10 KDa dialysis sac overnight. The effects of temperature and partial deglycosylation (acid hydrolysis) on purified EPO were also studied by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and peptide mapping analysis. Removal of sialic acid by mild hydrolysis was performed by exposure to two molar acetic acid at 80°C for 3 h.

RESULTS

No significant effect was observed between intact and stressed erythropoietin peptide mapping profiles and SDS-PAGE results. To validate the sensibility of the technique, erythropoietin was partially acid hydrolyzed and significant changes in the chromatographic peptide map of the intact form and a reduction on its molecular weight were detected, which indicates some partial deglycosylation.

CONCLUSIONS

Purification process does not alter the peptide mapping profile and purification process stresses are not the cause of peptide mapping noncompliance.