Active leukocyte detachment and apoptosis/necrosis on PEG hydrogels and the implication in the host inflammatory response

Surface Modification of Poly(dimethylsiloxane) Blood Flow Chambers with a Poly(ethylene glycol) Conjugate and Factor XII Inhibitor

This study is focused on the application of a dual surface coating on poly(dimethylsiloxane) (PDMS) flow chambers, which aims to inhibit the contact activation pathway of coagulation. Polyethylene glycol (PEG) is a commonly used biocompatible molecule due to its hydrophilic nature and capacity to reduce protein adsorption. Corn trypsin inhibitor (CTI) is a selective inhibitor of Factor XII, which is the initial factor responsible for activating the intrinsic pathway of coagulation. By sequentially applying these two coatings to PDMS substrates, we expect the PEG-CTI coating to decrease blood clot formation and reduce fibrinogen deposition on surfaces compared to uncoated surfaces. Our results indicate that the PEG-CTI coating was successful in significantly reducing both cell adsorption and fibrinogen deposition to the surfaces of PDMS flow chambers. This study is a step toward applying PEG-CTI surface coatings to PDMS microfluidic artificial lungs, in which the surface interaction between the PDMS lungs and blood is a critical issue that must be mitigated to realize the full potential of this exciting therapeutic tool.

Unraveling and Harnessing the Immune Response at the Cell-Biomaterial Interface for Tissue Engineering Purposes

Biomaterials are defined as "engineered materials" and include a range of natural and synthetic products, designed for their introduction into and interaction with living tissues. Biomaterials are considered prominent tools in regenerative medicine that support the restoration of tissue defects and retain physiologic functionality. Although commonly used in the medical field, these constructs are inherently foreign toward the host and induce an immune response at the material-tissue interface, defined as the foreign body response (FBR). A strong connection between the foreign body response and tissue regeneration is suggested, in which an appropriate amount of immune response and macrophage polarization is necessary to trigger autologous tissue formation. Recent developments in this field have led to the characterization of immunomodulatory traits that optimizes bioactivity, the integration of biomaterials and determines the fate of tissue regeneration. This review addresses a variety of aspects that are involved in steering the inflammatory response, including immune cell interactions, physical characteristics, biochemical cues, and metabolomics. Harnessing the advancing knowledge of the FBR allows for the optimization of biomaterial-based implants, aiming to prevent damage of the implant, improve natural regeneration, and provide the tools for an efficient and successful in vivo implantation.

PEGylation of model drug carriers enhances phagocytosis by primary human neutrophils

Targeted drug carriers are attractive for the delivery of therapeutics directly to the site of a disease, reducing systemic side effects and enhancing the efficacy of therapeutic molecules. However, the use of particulate carriers for drug delivery comes with its own set of challenges and barriers. Among these, a great deal of research effort has focused on protecting carriers from clearance by phagocytes via altering carrier surface chemistry, mostly with the use of polyethylene glycol (PEG) chain coatings. However, few papers have explored the effects of PEGylation on uptake by freshly-obtained primary human phagocytes in physiological conditions. In this work, we investigate the effect of PEGylation on particle uptake by primary human neutrophils in vitro and compare these effects to several cell lines and other model phagocytic cells systems. We find that human neutrophils in whole blood preferentially phagocytose PEGylated particles (e.g., ∼40% particle positive neutrophils for PEGylated versus ∼20% for carboxylated polystyrene microspheres) and that this effect is linked to factors present in human plasma. Model phagocytes internalized PEGylated particles less efficiently or equivalently to carboxylated particles in culture medium but preferentially phagocytosed PEGylated particles in the human plasma (e.g., ∼86% versus ∼63% PEGylated versus carboxylated particle positive cells, respectively). These findings have significant implications for the efficacy of PEGylation in designing long-circulating drug carriers, as well as the need for thorough characterization of drug carrier platforms in a wide array of in vitro and in vivo assays.

STATEMENT OF SIGNIFICANCE

The work in this manuscript is highly significant to the field of drug delivery, as it explores in-depth the effects of polyethylene glycol (PEG) coatings, which are frequently used to prevent phagocytic clearance of particulate drug carriers, on the phagocytosis of such carriers by neutrophils, the most abundant leukocyte in blood circulation. Surprisingly, we find that PEGylation enhances uptake by primary human neutrophils, specifically in the presence of human plasma. This result suggests that PEGylation may not confer the benefits in humans once thought, and may help to explain why PEG has not become the "magic bullet" it was once thought to be in the field of particulate drug delivery.

Mechanical properties, structure, bioadhesion, and biocompatibility of pectin hydrogels

The surface structure, biocompatibility, textural, and adhesive properties of calcium hydrogels derived from 1, 2, and 4% solutions of apple pectin were examined in this study. An increase in the pectin concentration in hydrogels was shown to improve their stability toward elastic and plastic deformation. The elasticity of pectin hydrogels, measured as Young's modulus, ranged from 6 to 100 kPa. The mechanical properties of the pectin hydrogels were shown to correspond to those of soft tissues. The characterization of surface roughness in terms of the roughness profile (Ra) and the root-mean-square deviation of the roughness profile (Rq) indicated an increased roughness profile for hydrogels depending on their pectin concentration. The adhesion of AU2% and AU4% hydrogels to the serosa abdominal wall, liver, and colon was higher than that of the AU1% hydrogel. The adhesion of macrophages and the non-specific adsorption of blood plasma proteins were found to increase as the pectin concentration in the hydrogels increased. The rate of degradation of all hydrogels was higher in phosphate buffered saline (PBS) than that in DMEM and a fibroblast cell monolayer. The pectin hydrogel was also found to have a low cytotoxicity. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2572-2581, 2017.

Generating favorable growth factor and protease release profiles to enable extracellular matrix accumulation within an in vitro tissue engineering environment

Tissue engineering (particularly for the case of load-bearing cardiovascular and connective tissues) requires the ability to promote the production and accumulation of extracellular matrix (ECM) components (e.g., collagen, glycosaminoglycan and elastin). Although different approaches have been attempted in order to enhance ECM accumulation in tissue engineered constructs, studies of underlying signalling mechanisms that influence ECM deposition and degradation during tissue remodelling and regeneration in multi-cellular culture systems have been limited. The current study investigated vascular smooth muscle cell (VSMC)-monocyte co-culture systems using different VSMC:monocyte ratios, within a degradable polyurethane scaffold, to assess their influence on ECM generation and degradation processes, and to elucidate relevant signalling molecules involved in this in vitro vascular tissue engineering system. It was found that a desired release profile of growth factors (e.g. insulin growth factor-1 (IGF-1)) and hydrolytic proteases (e.g. matrix-metalloproteinases 2, 9, 13 and 14 (MMP2, MMP9, MMP13 and MMP14)), could be achieved in co-culture systems, yielding an accumulation of ECM (specifically for 2:1 and 4:1 VSMC:monocyte culture systems). This study has significant implications for the tissue engineering field (including vascular tissue engineering), not only because it identified important cytokines and proteases that control ECM accumulation/degradation within synthetic tissue engineering scaffolds, but also because the established culture systems could be applied to improve the development of different types of tissue constructs.

STATEMENT OF SIGNIFICANCE

Sufficient extracellular matrix accumulation within cardiovascular and connective tissue engineered constructs is a prerequisite for their appropriate function in vivo. This study established co-culture systems with tissue specific cells (vascular smooth muscle cells (VSMCs)) and defined ratios of immune cells (monocytes) to investigate extracellular matrix (ECM) generation and degradation processes, revealing important mechanisms underlying ECM turnover during vascular tissue regeneration/remodelling. A specific growth factor (IGF-1), as well as hydrolytic proteases (e.g. MMP2, MMP9, MMP13 and MMP14), were identified as playing important roles in these processes. ECM accumulation was found to be dependent on achieving a desired release profile of these ECM-promoting and ECM-degrading factors within the multi-cellular microenvironment. The findings enhance our understanding of ECM deposition and degradation during in vitro tissue engineering and would be applicable to the repair or regeneration of a variety of tissues.

Interaction of a block-co-polymeric biomaterial with immunoglobulin G modulates human monocytes towards a non-inflammatory phenotype

Monocyte interactions with implanted biomaterials can contribute significantly to the ability of a biomaterial to support tissue integration and wound healing, as opposed to a chronic pro-inflammatory foreign body reaction, provided the materials are designed to do so. However, there are few biomaterials available designed to regulate immune cell response with the intention of reducing the pro-inflammatory activation state. Material chemistry is a powerful tool for regulating protein and cell interactions that can be incorporated into surfaces while maintaining desired mechanical properties. The aspects of material chemistry that can support monocyte activation away from a pro-inflammatory state are still poorly understood. Protein adsorption is a key initial event that transforms the surface of a biomedical device into a biological substrate that will govern subsequent cellular interactions. In this study, the chemistry of degradable block polyurethanes, termed degradable polar hydrophobic ionic (D-PHI) polyurethanes, were studied for their unique interactions with bound immunoglobulin G (IgG), a pro-inflammatory protein that supports monocyte-biomaterial interactions. The specific immunological active sites of the polyurethane-adsorbed protein were compared with IgG's adsorbed state on a homopolymeric material with surface chemistry conducive to cell interactions, e.g. tissue culture polystyrene (TCPS). IgG-coated TCPS supported sustained monocyte adhesion and enhanced monocyte spreading, effects not observed with IgG-coated PU. The degradable PU was subsequently shown to reduce the number of exposed IgG-Fab sites following pre-adsorption vs. IgG adsorbed to TCPS, with antibody inhibition experiments demonstrating that Fab-site exposure appears to dominate monocyte-biomaterial interactions. Minor changes in chemical segments within the PU molecular chains were subsequently investigated for their influence on directing IgG interactions towards reducing pro-inflammatory activity. A reduction in chemical heterogeneity within the PU, without significant differences in other material properties known to regulate monocyte response, was shown to increase Fab exposure and subsequently led to monocyte interactions similar to those observed for IgG-coated TCPS. These results infer that reduced IgG-Fab site exposure can be directed by material chemistry to attenuate pro-inflammatory monocyte interactions with biomaterial surfaces, and identify the chemical features of polymeric biomaterial design responsible for this process.

STATEMENT OF SIGNIFICANCE

There is currently limited understanding of material design features that can regulate protein-material interactions in order to prevent adverse inflammatory responses to implanted biomaterials. In this paper, monocyte interactions with biomaterials (specifically a block co-polymeric degradable polyurethane [D-PHI] and tissue culture polystyrene [TCPS]) were investigated as a function of their interactions with adsorbed immunoglobulin G (IgG). D-PHI was shown to attenuate IgG-induced monocyte retention and spreading by reducing IgG-Fab site exposure upon adsorption relative to TCPS. Aspects of D-PHI chemistry important in regulating Fab site exposure were determined. This study thus identifies features of biomaterials, using D-PHI as a case study, which can contribute to the development of new immunomodulatory biomaterial design.

Biomaterials differentially regulate Src kinases and phosphoinositide 3-kinase-γ in polymorphonuclear leukocyte primary and tertiary granule release

In the foreign body response, infiltrating PMNs exocytose granule subsets to influence subsequent downstream inflammatory and wound healing events. In previous studies, we found that PMNs cultured on poly(ethylene glycol) (PEG)-containing hydrogels (i.e., PEG and gelatin + PEG hydrogels) had enhanced primary granule release, yet similar tertiary granule release compared with PMNs cultured on polydimethylsiloxane or tissue culture polystyrene. PMN primary granules contain microbicidal proteins and proteases, which can potentially injure bystander cells, degrade the extracellular matrix, and promote inflammation. Here, we sought to understand the mechanism of the enhanced primary granule release from PMNs on PEG hydrogels. We found that primary granule release from PMNs on PEG hydrogels was adhesion mediated and involved Src family kinases and PI3K-γ. The addition of gelatin to PEG hydrogels did not further enhance PMN primary granule release. Using stable-isotope dimethyl labeling-based shotgun proteomics, we identified many serum proteins - including Ig gamma constant chain region proteins and alpha-1-acid glycoprotein 1 - that were absorbed/adsorbed in higher quantities on PEG hydrogels than on TCPS, and may be involved in mediating PMN primary granule release. Ultimately, this mechanistic knowledge can be used to direct inflammation and wound healing following biomaterial implantation to promote a more favorable healing response.

Mesenchymal Stromal/Stem Cell and Minocycline-Loaded Hydrogels Inhibit the Growth of Staphylococcus aureus that Evades Immunomodulation of Blood-Derived Leukocytes

Mesenchymal stromal/stem cells (MSCs) have demonstrated favorable wound healing properties in addition to their differentiation capacity. MSCs encapsulated in biomaterials such as gelatin and polyethylene glycol (PEG) composite hydrogels have displayed an immunophenotype change that leads to the release of cytokines and growth factors to accelerate wound healing. However, therapeutic potential of implanted MSC-loaded hydrogels may be limited by non-specific protein adsorption that facilitates adhesion of bacterial pathogens such as planktonic Staphylococcus aureus (SA) to the surface with subsequent biofilm formation resistant to immune cell recognition and antibiotic activity. In this study, we demonstrate that blood-derived primary leukocytes and bone marrow-derived MSCs cannot inhibit colony-forming abilities of planktonic or biofilm-associated SA. However, we show that hydrogels loaded with MSCs and minocycline significantly inhibit colony-forming abilities of planktonic SA while maintaining MSC viability and multipotency. Our results suggest that minocycline and MSC-loaded hydrogels may decrease the bioburden of SA at implant sites in wounds, and may improve the wound healing capabilities of MSC-loaded hydrogels.

Impact of surface chemistry and topography on the function of antigen presenting cells

The impact of biomaterial surface topography and chemistry on antigen presenting cells’ phenotype and function.

Effects of anodic titanium dioxide nanotubes of different diameters on macrophage secretion and expression of cytokines and chemokines

OBJECTIVES

To investigate effects of TiO2 nanotubes of different diameters on J744A.1 macrophage behaviour, secretion and expression of pro-inflammatory cytokines and chemokines.

MATERIALS AND METHODS

Macrophage-like J744A.1 cells were cultured on three types of Ti surface: mechanically polished titanium plus 30 and 80 nm TiO2 nanotube surfaces, for 4, 24 and 48 h. Macrophage adhesion and proliferation were assessed using CCK-8 assay. Levels of pro-inflammatory cytokines (TNF-α, IL-1β and IL-6) and chemokines (MCP-1 and MIP-1α) secreted into the supernatant were measured using the Cytometric Bead Arrays kit. TNF-α, MCP-1 and MIP-1α gene expression were quantitatively analysed by real-time PCR.

RESULTS

These show that TiO2 nanotube surfaces, especially of 80 nm TiO2 nanotube, benefited macrophage adhesion and proliferation, and reduced protein secretion and mRNA expression of TNF-α, MCP-1 and MIP-1α. IL-1β and IL-6 were undetectable on all the surfaces at all times.

CONCLUSIONS

TiO2 nanotube surfaces, especially of 80 nm TiO2 nanotube, reduced inflammatory response in vitro, which might be part of a basis for rapid osseointegration in implants with TiO2 nanotube surfaces in animal studies.

Poly(ethylene glycol)-containing hydrogels promote the release of primary granules from human blood-derived polymorphonuclear leukocytes

Polymorphonuclear leukocytes (PMNs) are recruited to sites of injury and biomaterial implants. Once activated, PMNs can exocytose their granule subsets to recruit monocytes (MCs) and mediate MC/macrophage activation. We investigated the release of myeloperoxidase (MPO), a primary granule marker, and matrix metalloproteinase-9 (MMP-9), a tertiary granule marker, from human blood-derived PMNs cultured on poly(ethylene glycol) (PEG) hydrogels, polydimethylsiloxane (PDMS), tissue culture polystyrene (TCPS) and gelatin-PEG (GP) hydrogels, with and without the presence of the bacterial peptide formyl-Met-Leu-Phe. Supernatants from PMN cultures on PEG-containing hydrogels (i.e., PEG and GP hydrogels) had higher concentrations of MPO than those from PMN cultures on PDMS or TCPS at 2 h. PMNs on all biomaterials released comparable levels of MMP-9 at 2 h, indicating that PMNs cultured on PEG-containing hydrogels have different mechanisms of release for primary and tertiary granules. Src family kinases were involved in the release of MPO from PMNs cultured on PEG hydrogels, TCPS and GP hydrogels and in the release of MMP-9 from PMNs cultured on all four biomaterials. The increased release of primary granules from PMNs on PEG-containing hydrogels did not significantly increase MC chemotaxis, indicating that additional co-effectors in the dynamic inflammatory milieu in vivo modulate PMN-mediated MC recruitment.

Purinergic signaling in early inflammatory events of the foreign body response: modulating extracellular ATP as an enabling technology for engineered implants and tissues

Purinergic signaling is a ubiquitous and vital aspect of mammalian biology in which purines--mainly adenosine triphosphate (ATP)--are released from cells through loss of membrane integrity (cell death), exocytosis, or transport/diffusion across membrane channels, and exert paracrine or autocrine signaling effects through three subclasses of well-characterized receptors: the P1 adenosine receptors, the P2X ionotropic nucleotide receptors, and the P2Y metabotropic receptors. ATP and its metabolites are released by damaged and stressed cells in injured tissues. The early events of wound healing, hemostasis, and inflammation are highly regulated by these signals through activation of purinergic receptors on platelets and neutrophils. Recent data have demonstrated that ATP signaling is of particular importance to targeting leukocytes to sites of injury. This is particularly relevant to the subject of implanted medical devices, engineered tissues, and grafts as all these technologies elicit a wound healing response with varying degrees of encapsulation, rejection, extrusion, or destruction of the tissue or device. Here, we review the biology of purinergic signaling and focus on ATP release and response mechanisms that pertain to the early inflammatory phase of wound healing. Finally, therapeutic options are explored, including a new class of peptidomimetic drugs based on the ATP-conductive channel connexin43.

Combinatorial biomatrix/cell-based therapies for restoration of host tissue architecture and function

This Progress Report reviews recent advances in the utility of extracellular matrix (ECM)-mimic biomaterials in presenting and delivering therapeutic cells to promote tissue healing. This overview gives a brief introduction of different cell types being used in regenerative medicine and tissue engineering while addressing critical issues that must be overcome before cell-based approaches can be routinely employed in the clinic. A selection of five commonly used cell-associated, biomaterial platforms (collagen, hyaluronic acid, fibrin, alginate, and poly(ethylene glycol)) are reviewed for treatment of a number of acute injury or diseases with emphasis on animal models and clinical trials. This article concludes with current challenges and future perspectives regarding foreign body host response to biomaterials and immunological reactions to allogeneic or xenogeneic cells, vascularization and angiogenesis, matching mechanical strength and anisotropy of native tissues, as well as other non-technical issues regarding the clinical translation of biomatrix/cell-based therapies.

Biomaterials selectively modulate interactions between human blood-derived polymorphonuclear leukocytes and monocytes

Implantation of a biomaterial into the body elicits a host foreign body response, during which polymorphonuclear leukocytes (PMNs) and then monocytes (MCs) are recruited to the site of implantation. MCs and MC-derived macrophages are central players in this response because they secrete proinflammatory and/or pro-wound-healing cytokines and growth factors that influence subsequent healing events. Although mechanisms of MC response to biomaterials are often studied in in vitro monoculture models, few studies have investigated how biomaterials modulate PMN-MC paracrine and juxtacrine interactions. To address this, we cultured human blood-derived MCs alone or in the presence of autologous PMN-conditioned medium (PCM) on poly(ethylene glycol) hydrogels, poly(dimethyl siloxane), and tissue culture polystyrene. We also directly co-cultured autologous PMNs and MCs on these biomaterials. PCM increased MC adhesion/viability and expression of IL-1β and tumor necrosis factor-α in a biomaterial- and time-dependent manner when compared with MCs that were not cultured in PCM. There were also biomaterial- and time-dependent differences in cell adhesion/viability, apoptosis, and expression of IL-6 and IL-8 in the PMN-MC direct co-cultures when compared with the sums of these activities in PMN and MC monocultures. In conclusion, these data suggest that biomaterials selectively modulate PMN-MC paracrine and juxtacrine interactions to influence MC and/or PMN adhesion/viability, apoptosis, and cytokine expression.

Bioresponsive hydrogels

Bioresponsive hydrogels are emerging with technological significance in targeted drug delivery, biosensors, and regenerative medicine. Their ability to respond to specific biologically derived stimuli creates a design challenge in effectively linking the conferred biospecificity with an engineered response tailored to the needs of a particular application. Moreover, the fundamental phenomena governing the response must support an appropriate dynamic range, limit of detection, and the potential for feedback control. The design of these systems is inherently complicated due to the high interdependency of the governing phenomena that guide sensing, transduction, and actuation of the hydrogel. Future advancements in bioresponsive hydrogels will out of necessity contain control loops similar to synthetic metabolic pathways. The use of these materials will continue to expand as they become coupled and integrated with new technologies.

Elucidation of adhesion-dependent spontaneous apoptosis in macrophages using phase separated PEG/polyurethane films

Circulating monocytes undergo spontaneous apoptosis when there is no activation stimulus, which is critical to population control for proper host response to implants. As activation and apoptosis of monocytes/macrophages are regulated by cell-cell and cell-matrix interactions, their regulatory mechanism was investigated in this study using polyethylene glycol (PEG)-containing polyurethane films in which PEG-rich and polyester-rich domains were phase separated. Human blood monocyte-derived macrophages (HBMs) preferentially adhered to PEG domains (cell-matrix interaction) due to the low molecular weight (600 g mol⁻¹), resulting in increased HBM density (cell-cell interaction). As both cell-cell and cell-matrix interactions were promoted, HBM apoptosis increased, while their activation as measured by phagocytosis, intracellular reactive oxygen species (ROS) level and matrix metalloproteinase-9 production decreased compared to PEG-free films. When cell seeding density and cell-adhesive gelatin coating on silicone films were controlled, a cooperative role of cell-matrix (adhesion) and cell-cell (density) interactions in inducing HBM apoptosis was observed. Expression of the macrophage adhesion molecule CD11b caused apoptosis in this context, which was mediated by tissue necrosis factor-α signaling but down-regulated by the ROS inhibitor diphenylene iodonium and the anti-inflammatory peptide Ac-SDKP, suggesting a new concept for the design of biomaterials that allows for cell adhesion without excessive inflammatory activation.

Cell encapsulating biomaterial regulates mesenchymal stromal/stem cell differentiation and macrophage immunophenotype

Bone marrow mesenchymal stromal/stem cell (MSC) encapsulation within a biomatrix could improve cellular delivery and extend survival and residence time over conventional intravenous administration. Although MSCs modulate monocyte/macrophage (Mø) immunophenotypic properties, little is known about how such interactions are influenced when MSCs are entrapped within a biomaterial. Furthermore, the impact of the cell-encapsulating matrix on MSC multipotency and on Møs, which infiltrate biomaterials, remains poorly understood. Here we elucidate this three-way interaction. The Mø immunophenotype and MSC differentiation were examined with regard to established and experimental collagen-based biomaterials for MSC entrapment. Tumor necrosis factor-α secretion was acutely inhibited at 4 days. MSCs cocultured with Møs demonstrated attenuated chondrocyte differentiation, whereas osteoblast differentiation was enhanced. Adipocyte differentiation was considerably enhanced for MSCs entrapped within the gelatin/polyethylene glycol-based matrix. A better understanding of the effect of cell encapsulation on differentiation potency and immunomodulation of MSCs is essential for MSC-based, biomaterial-enabled therapies.