Thermodynamic characterization of a highly thermoactive extracellular pectate lyase from a new isolate Bacillus pumilus DKS1

Heterologous expression and characterization of an unsaturated glucuronyl hydrolase from Alteromonas sp. A321

Strong promoters and stable mRNAs are essential for the overproduction of heterologous proteins in Bacillus subtilis. To improve the strength of natural promoters and ensure robust protein output, promoter and genetic insulator engineering have been used. A series of plasmids containing single and dual promoters and genetic insulators to express alt3796 were engineered, which encoded an unsaturated glucuronyl hydrolase (UGL). As a first step, we screened the host and deleted the signal peptide (SPALT) of alt3796, successfully expressed secreted ALT3796 from B. subtilis WB800. Subsequently, to improve expression, we screened the dual promoter PHag-spoVG from a collection of 22 promoters, which yielded higher enzymatic activity. Finally, using a recombinant strain carrying a plasmid with the PHag-spoVG dual promoter and a genetic insulator, we obtained 40.9 U/mL of activity. Purified recombinant ALT3796 exhibited good stability and specifically degraded ulvan. In conclusion, a system for the heterologous expression of ALT3796 was constructed, and the obtained protein exhibited favorable properties, suggesting its potential for preparing novel ulvan oligosaccharides.

Unveiling novel insights into Bacillus velezensis 16B pectin lyase for improved fruit juice processing

Microbial pectinolytic enzymes are important in various industries, particularly food processing. This study focuses on uncovering insights into a novel pectin lyase, BvPelB, from Bacillus velezensis 16B, with the aim of enhancing fruit juice processing. The study examines the structural and functional characteristics of pectinolytic enzyme, underscoring the critical nature of substrate specificity and enzymatic reaction mechanisms. BvPelB was successfully expressed and purified, exhibiting robust activity under alkaline conditions and thermal stability. Structural analysis revealed similarities with other pectin lyases, despite limited sequence identity. Biochemical characterization showed BvPelB's preference for highly methylated pectins and its endo-acting mode of cleavage. Treatment with BvPelB significantly increased juice yield and clarity without generating excessive methanol, making it a promising candidate for fruit juice processing. Overall, this study provides valuable insights into the enzymatic properties of BvPelB and its potential industrial applications in improving fruit juice processing efficiency and quality.

Pulp Enhancement of Oil Palm Empty Fruit Bunches (OPEFBs) via Biobleaching by Using Xylano-Pectinolytic Enzymes of Bacillus amyloliquefaciens ADI2

The present work reports the biobleaching effect on OPEFB pulp upon utilisation of extracellular xylano-pectinolytic enzymes simultaneously yielded from Bacillus amyloliquefaciens ADI2. The impacts of different doses, retention times, pH, and temperatures required for the pulp biobleaching process were delineated accordingly. Here, the OPEFB pulp was subjected to pre-treatment with xylano-pectinolytic enzymes generated from the same alkalo-thermotolerant isolate that yielded those of higher quality. Remarkable enhanced outcomes were observed across varying pulp attributes: for example, enzyme-treated pulp treated to chemical bleaching sequence generated improved brightness of 11.25%. This resulted in 11.25% of less chlorine or chemical consumption required for obtaining pulp with optical attributes identical to those generated via typical chemical bleaching processes. Ultimately, the reduced consumption of chlorine would minimise the organochlorine compounds found in an effluent, resulting in a lowered environmental effect of paper-making processes overall as a consequence. This will undoubtedly facilitate such environmentally-friendly technology incorporation in the paper pulp industry of today.

Screening of pectinase-producing bacteria from farmlands and optimization of enzyme production from selected strain by RSM

Pectinolytic enzymes that catalyze the breakdown of substrates containing pectin are widespread. Pectinases have potential applications in various industries, including food, animal feed, textile, paper, and fuel. In this study, one hundred bacterial isolates were collected from Marand city farmlands (Azarbaijan-E-Sharqi, Iran) and screened by MP medium on the base of pectinase activity considering the significance of pectinases. The results depicted that three isolates showed the most pectinase activity (more massive halo). The biochemical and molecular test results showed that the three screened bacteria were Enterobacter and named Enterobacter sp. MF41, Enterobacter sp. MF84, and Enterobacter sp. MF90. Enterobacter sp. MF84 had the largest halo, so this strain was selected for the study of its produced pectinase. The results exhibited that the produced enzyme has optimum temperature and pH for activity at 30 °C and in 9, respectively. Finally, the enzyme production by Enterobacter sp. MF84 is optimized using response surface methodology (RSM) considering four factors (NH₄Cl, K₂HPO₄, pectin, and incubation time) as variables. The results showed that the optimization procedure increased the enzyme production up to 12 times (from 1.16 to 14.16 U/mg). The Pareto analysis revealed that ammonium chloride has a significant role in decreasing the enzyme production, probably by inducing the nitrification pathway enzymes in the presence of organic nitrogen in Enterobacter sp. MF84.

The purification and characterization of a novel alkali-stable pectate lyase produced by Bacillus subtilis PB1

Pectinase is an important kind of enzyme with many industrial applications, among which pectinases produced by bacteria were scarce compared with fungal sources. In this study, a novel bacterium which produced extracellular pectinase was firstly isolated from flue-cured tobacco leaves and identified as Bacillus subtilis PB1 according to its 16S rRNA gene. The pectinolytic enzyme was purified by ammonium sulfate precipitation, ion-exchange and gel filtration chromatography, after which molecular weight was determined as 43.1 ± 0.5 kDa by SDS-PAGE. Peptide mass fingerprinting of the pectinase by MALDI-TOF MS showed that the purified enzyme shared homology with pectate lyase and was designated as BsPel-PB1. The optimal temperature for BsPel-PB1 was 50 °C. The optimal pH was pH 9.5 for BsPel-PB1 while it had a broad pH stability from 5 to 11. The values of K m and V max were 0.312 mg/mL and 1248 U/mL, respectively. Accordingly, the BsPel-PB1 was a novel alkaline pectate lyase which could find potential application as a commercial candidate in the pectinolytic related industries.

A novel thermostable, alkaline pectate lyase from Bacillus tequilensis SV11 with potential in textile industry

An extracellular pectate lyase was purified and characterized from a UV mutant of Bacillus tequilensis SV11. Purification resulted in a 16.2-fold improvement in the enzyme specific activity, with approximately 40.2% yield. SDS-PAGE showed that the enzyme had two subunits with molecular masses of 135 ± 2 and 43 ± 2 kDa. Further, MALDI-TOF MS experiments revealed that the mass spectrum of the second peptide significantly (91% score) matched with the unsaturated rhamnogalacturonyl hydrolase YteR OS-Bacillus subtilis (strain 168) by 27% sequence coverage, nominal mass 43,231 Da, and PI 5.91. The enzyme was optimally active at 60 °C, pH 9. Km and Vmax of the purified pectate lyase was found to be 1.220 mg/mL and 1773 U/mL, respectively. The enzyme was studied for its applicability in bioscouring and found to be efficient in the removal of 97.91% pectin of cotton fabric when compared with alkali-treated fabric.

Nanotechnology enabled enhancement of enzyme activity and thermostability: study on impaired pectate lyase from attenuated Macrophomina phaseolina in presence of hydroxyapatite nanoparticle

In this paper we show that hydroxyapatite nanoparticles (NP) can not only act as a chaperon (by imparting thermostability) but can serve as a synthetic enhancer of activity of an isolated extracellular pectate lyase (APL) with low native state activity. The purified enzyme (an attenuated strain of Macrophomina phaseolina) showed feeble activity at 50°C and pH 5.6. However, on addition of 10.5 µg/ml of hydroxyapatite nanoparticles (NP), APL activity increased 27.7 fold with a 51 fold increase in half-life at a temperature of 90°C as compared to untreated APL. The chaperon like activity of NP was evident from entropy–enthalpy compensation profile of APL. The upper critical temperature for such compensation was elevated from 50°C to 90°C in presence of NP. This dual role of NP in enhancing activity and conferring thermostability to a functionally impaired enzyme is reported for the first time.

Improvement of thermostability and activity of pectate lyase in the presence of hydroxyapatite nanoparticles

The activity and half-life of pectate lyase (PL) from Bacillus megaterium were nine- and 60-fold, respectively, higher at 90 °C in the presence of hydroxyapatite nanoparticles (NP-PLs) than in the presence of 1mM CaCl(2). Thermodynamic analysis of the nanoparticle-induced stability revealed an enhanced entropy-enthalpy compensation by the NP-PLs since a reciprocal linearity of the enthalpy-entropy change to 90 °C was observed. Without nanoparticles, the linearity range was 70 °C. Such compensation reflected the maintenance of the native structure of proteins. The remarkable enhancement of activity and stability of the NP-PL system at high temperatures may be utilized commercially e.g. in the food industry or the processing of natural fibers that may require a thermotolerant enzyme.

Isolation and characterisation of aerobic endospore forming Bacilli from sugarcane rhizosphere for the selection of strains with agriculture potentialities

Eighteen aerobic endospore forming strains were isolated from sugarcane rhizosphere in N-free medium. A phenotypic description and analysis of the 5' end hypervariable region sequences of 16S rRNA revealed a high diversity of Bacillus and related genera. Isolates were identified, and four genera were obtained: seven strains belonged to Bacillus (Bacillaceae family), four belonged to Paenibacillus, six belonged to Brevibacillus and one strain was identified as Cohnella (Paenibacillaceae family). Four Brevibacillus strains showed in vitro inhibitory activity against plant pathogens fungi Curvularia and Fusarium. Seventy-four percent of the isolated bacteria grew on pectin as the only carbon source, showing polygalacturonase activity. Pectate lyase activity was detected for the first time in a Brevibacillus genus strain. All isolates showed endoglucanase activity. Calcium phosphate solubilisation was positive in 83.3% of the isolates, with higher values than those reported for Bacillus inorganic phosphate solubilising strains. High ethylene plant hormone secretion in the culture medium was detected in 22% of the bacteria. This is the first report of ethylene secretion in Paenibacillaceae isolates. Indole-3-acetic acid production was found in a Brevibacillus genus isolate. It was reported for the first time the presence of Cohnella genus strain on sugarcane rhizosphere bearing plant growth promoting traits. The sugarcane isolate Brevibacillus B65 was identified as a plant growth inoculant because it showed wider spectra of plant stimulation capabilities, including an antifungal effect, extracellular hydrolases secretion, inorganic phosphate solubilisation and plant hormone liberation. In this work, sugarcane was shown to be a suitable niche for finding aerobic endospore forming 'Bacilli' with agriculture biotechnological purposes.

Application of cellulase-free xylano-pectinolytic enzymes from the same bacterial isolate in biobleaching of kraft pulp

A synergistic action of xylano-pectinolytic enzymes from the same bacterial isolate Bacillus pumilus was evaluated for the prebleaching of kraft pulp. The enzymatic prebleaching of kraft pulp resulted in 8.5% reduction in kappa number of the pulp, showing remarkable delignification with the enzyme treatment. This approach resulted in 25% reduction in active chlorine consumption in subsequent bleaching stages without any decrease in brightness. Increase in Burst factor (9%), Tear factor (4.6%), Breaking length (4.4%), Double fold number (12.5%), Gurley porosity (4%) and Viscosity (11.8%) of enzyme treated pulp reflected the significant improvement in pulp properties. This is the first report describing the use of xylanase and pectinase produced simultaneously in the same production medium from the same bacterial isolate for effective biobleaching of kraft pulp. Use of this xylano-pectinolytic synergism in paper and pulp industry will ultimately help in making the process not only economically feasible but also eco-friendly.

Influence of pH and sodium chloride on kinetics of thermal inactivation of the bacteriocin-like substance P34

AIMS

To investigate the kinetics of thermal inactivation of the bacteriocin-like substance P34 at different pH and sodium chloride concentration.

METHODS AND RESULTS

Samples of bacteriocin were treated at different time-temperature combinations in the range of 0-300 min and 90-120°C and the kinetic parameters for bacteriocin inactivation were calculated. For all treatments, the thermal inactivation reaction fitted adequately to first-order model. D- and k-values were smaller and higher, respectively, for pH 4·5 than for 6·0 or 7·0, indicating that bacteriocin P34 was less thermostable at lower pH. At 120, 115 and 100°C, the addition of sodium chloride decreased thermal stability. For other temperatures, addition of NaCl increased stability of the peptide. The presence of greater amount of the salt (50 g l(-1) ) resulted in a higher thermal stability of bacteriocin P34, suggesting that the reduction in water activity of the solution interfered on the stability of the peptide.

CONCLUSIONS

Based on an isothermal experiment in the temperature range of 90-120°C, and by thermal death time models, bacteriocin P34 is less heat stable at low pH and has increased thermal stability in the presence of NaCl. Addition of NaCl improved the stability of the peptide P34 at high temperatures.

SIGNIFICANCE AND IMPACT OF THE STUDY

Studies on kinetics of thermal inactivation of bacteriocins are essential to allow their proper utilization in the food industry.